legacy/libisoburn/trunk/ng_src/libisoburn.h

/*
  API definition of libisoburn.

  Copyright 2007 Vreixo Formoso Lopes <metalpain2002@yahoo.es>
             and Thomas Schmitt <scdbackup@gmx.net>
*/

/**

libisoburn is a frontend for libraries libburn and libisofs which enables
creation and expansion of ISO-9660 filesystems on all CD/DVD media supported
by libburn. This includes media like DVD+RW, which do not support multi-session
management on media level and even plain disk files or block devices.

The price for that is thorough specialization on data files in ISO-9660
filesystem images. So libisoburn is not suitable for audio (CD-DA) or any
other CD layout which does not entirely consist of ISO-9660 sessions.

The priciple of this frontend is that you may use any call of libisofs or
libburn unless it has a  isoburn_*()  wrapper listed in the following function
documentation.

E.g. call isoburn_initialize() rather than iso_init(); burn_initialize()
and call isoburn_drive_scan_and_grab() rather than burn_drive_scan_and_grab().
But you may call  burn_disc_get_profile()  directly if you want to display
the media type.

>>>
>>> Take into respect Vreixo's (mandatory ?) shortcuts which are to come
>>>

The usage model is like with libburn: the target is a "media" in a "drive". 
The wrappers will transparently provide the necessary emulations which
are appropriate for particular target "drives".

*/


                          /* API functions */


/** Initialize libisoburn, libisofs and libburn.
    Wrapper for : iso_init() and burn_initialize()
    @return 1 indicates success, 0 is failure
*/
int isoburn_initialize(void);


/** Aquire a target drive by its filesystem path resp. libburn persistent
    address.
    Wrapper for: burn_drive_scan_and_grab()
*/
int isoburn_drive_scan_and_grab(struct burn_drive_info *drive_infos[],
                                char* adr, int load);


/** Aquire a drive from the burn_drive_info[] array which was obtained by
    a previous call of burn_drive_scan(). 
    Wrapper for: burn_drive_grab()
*/
int isoburn_drive_grab(struct burn_drive *drive, int load);


/** Inquire the media status. Expect the whole spectrum of libburn BURN_DISC_*
    with multi-session media. Emulated states with random access media are
    BURN_DISC_BLANK and BURN_DISC_APPENDABLE.
    Wrapper for: burn_disc_get_status()
*/
enum burn_disc_status isoburn_disc_get_status(struct burn_drive *drive);


/** Tells whether the media can be treated by isoburn_disc_erase().
    Wrapper for: burn_disc_erasable()
*/
int isoburn_disc_erasable(struct burn_drive *d);


/** Mark the media as blank. With multi-session media this will call
    burn_disc_erase(). With random access media, an eventual ISO-9660
    filesystem will get invalidated by altering its start blocks on media.
    In case of success, the media is in status BURN_DISC_BLANK afterwards.
    Wrapper for: burn_disc_erase()
*/
void isoburn_disc_erase(struct burn_drive *drive, int fast);

/**
 * Options for image reading.
 */
struct isoburn_read_opts {
    unsigned int norock:1; /*< Do not read Rock Ridge extensions */
    unsigned int nojoliet:1; /*< Do not read Joliet extensions */
    unsigned int preferjoliet:1; 
                /*< When both Joliet and RR extensions are present, the RR
                 *  tree is used. If you prefer using Joliet, set this to 1. */
    uid_t uid; /**< Default uid when no RR */
    gid_t gid; /**< Default uid when no RR */
    mode_t mode; /**< Default mode when no RR (only permissions) */

    /**
     * Input charset for RR file names. NULL to use default locale charset.
     */
    char *input_charset;

    /* modified by the function isoburn_read_image */
    unsigned int hasRR:1; /*< It will be set to 1 if RR extensions are present,
                             to 0 if not. */
    unsigned int hasJoliet:1; /*< It will be set to 1 if Joliet extensions are 
                                  present, to 0 if not. */
    uint32_t size; /**< Will be filled with the size (in 2048 byte block) of 
                    *   the image, as reported in the PVM. */
    unsigned int pretend_blank:1; /* always create empty image */
};

/**
 * Options for image generation by libisofs and image transport to libburn.
 */
struct isoburn_source_opts {

    /* Options for image generation */

    int level;  /**< ISO level to write at. */
    int flags;  /**< Which extensions to support. */
    int relaxed_constraints; /**< see ecma119_relaxed_constraints_flag */
    
    /** Which extensions to support. */
    unsigned int rockridge :1;
    unsigned int joliet :1;

    /* relaxed constraints */
    unsigned int omit_version_numbers :1;
    unsigned int allow_deep_paths :1;
    unsigned int joliet_longer_paths :1;

    unsigned int sort_files:1;
                /**< If files should be sorted based on their weight. */

    unsigned int copy_eltorito:1;
        /**<
         * In multisession discs, select whether to copy el-torito catalog
         * and boot image. Copy is needed for isolinux images, that need to
         * be patched. However, it can lead to problems when the image is 
         * not present in the iso filesystem, because we can't figure out
         * its size. In those cases, we only copy 1 block of data.
         */
    
    /**
     * The following options set the default values for files and directory
     * permissions, gid and uid. All these take one of three values: 0, 1 or 2.
     * If 0, the corresponding attribute will be kept as set in the IsoNode.
     * Unless you have changed it, it corresponds to the value on disc, so it
     * is suitable for backup purposes. If set to 1, the corresponding attrib.
     * will be changed by a default suitable value. Finally, if you set it to
     * 2, the attrib. will be changed with the value specified in the options
     * below. Note that for mode attributes, only the permissions are set, the
     * file type remains unchanged.
     */
    unsigned int replace_dir_mode :2; 
    unsigned int replace_file_mode :2;
    unsigned int replace_uid :2;
    unsigned int replace_gid :2;
    
    mode_t dir_mode; /** Mode to use on dirs when replace_dir_mode == 2. */
    mode_t file_mode; /** Mode to use on files when replace_file_mode == 2. */
    uid_t uid; /** uid to use when replace_uid == 2. */
    gid_t gid; /** gid to use when replace_gid == 2. */

    char *output_charset; /**< NULL to use default charset */


    /* Options for image transport */

    /** The number of bytes to be used for the fifo which decouples libisofs
        and libburn for better throughput and for reducing the risk of
        interrupting signals hitting the libburn thread which operates the
        MMC drive.
        The size will be rounded up to the next full 2048.
        Minimum is 64kiB, maximum is 1 GiB (but that is too much anyway).
    */
    int fifo_size;

};

/** Get the image attached to a drive, if any.
    @return A reference to attached image, or NULL if the drive has no image
            attached. This reference needs to be released via iso_image_unref()
            when it is not longer needed.
*/
IsoImage *isoburn_get_attached_image(struct burn_drive *d);

/** Load the ISO filesystem directory tree from the media in the given drive.
    This will give libisoburn the base on which it can let libisofs perform
    image growing or image modification. The loaded volset gets attached
    to the drive object and handed out to the application.
    Not a wrapper, but peculiar to libisoburn.
    @param d The drive which holds an existing ISO filesystem or blank media.
             d is allowed to be NULL which produces an empty ISO image. In
             this case one has to call before writing isoburn_attach_volset()
             with the volset from this call and with the intended output
             drive.
    @param read_opts The read options which can be chosen by the application
    @param image the image read, if the disc is blank it will have no files.
             This reference needs to be released via iso_image_unref() when
             it is not longer needed. The drive, if not NULL, will hold an
             own reference which it will release when it gets a new volset
             or when it gets released via isoburn_drive_release().
             You can pass NULL if you already have a reference or you plan to
             obtain it later with isoburn_get_attached_image(). Of course, if
             you haven't specified a valid drive (i.e., if d == NULL), this
             parameter can't be NULL.
    @return <=0 error , 1 = success
*/
int isoburn_read_image(struct burn_drive *d,
                       struct isoburn_read_opts *read_opts,
                       IsoImage **image);


/** Set the IsoImage to be used with a drive. This eventually releases
    the reference to the old IsoImage attached to the drive.
    Caution: Use with care. It hardly makes sense to replace an image that
             reflects a valid ISO image on media.
    This call is rather intended for writing a newly created and populated
    image to blank media. The use case in xorriso is to let an image survive
    the change or demise of the outdev target drive. 
    @param d The drive which shall be write target of the volset.
    @param image The image that represents the image to be written.
             This image pointer MUST already be a valid reference suitable
             for iso_image_unref().
             It may have been obtained by appropriate libisofs calls or by
             isoburn_read_image() with d==NULL.
    @return <=0 error , 1 = success
*/ 
int isoburn_attach_image(struct burn_drive *d, IsoImage *image);


/** Obtain the start block number of the most recent session on media. In
    case of random access media this will always be 0. Succesfull return is
    not a guarantee that there is a ISO-9660 image at all. The call will fail,
    nevertheless,if isoburn_disc_get_status() returns not BURN_DISC_APPENDABLE.
    Wrapper for: burn_disc_get_msc1()
*/
int isoburn_disc_get_msc1(struct burn_drive *d, int *start_lba);


/** Use this with trackno==0 to obtain the predicted start block number of the
    new session. The interesting number is returned in parameter nwa.
    Wrapper for: burn_disc_track_lba_nwa()
*/
int isoburn_disc_track_lba_nwa(struct burn_drive *d, struct burn_write_opts *o,
                               int trackno, int *lba, int *nwa);


/** Obtain the size which was attributed to an emulated appendable on actually
    overwriteable media. This value is supposed to be <= 2048 * nwa as of
    isoburn_disc_track_lba_nwa().
    @param drive The drive holding the media.
    @param start_byte The reply value counted in bytes, not in sectors.
    @param flag  Unused yet. Submit 0.
    @return 1=stat_byte is valid, 0=not an emulated appendable, -1=error 
*/
int isoburn_get_min_start_byte(struct burn_drive *d, off_t *start_byte,
                               int flag);


/** Create a disc object for writing the new session from the created or loaded
    iso_volset which has been manipulated via libisofs, to the same media from
    where the image was eventually loaded. This struct burn_disc is ready for
    use by a subsequent call to isoburn_disc_write().
    After this asynchronous writing has ended and the drive is BURN_DRIVE_IDLE
    again, the burn_disc object has to be disposed by burn_disc_free().
    @param drive The combined source and target drive, grabbed with
                 isoburn_drive_scan_and_grab(). .
    @param disc Returns the newly created burn_disc object.
    @return <=0 error , 1 = success
*/
int isoburn_prepare_disc(struct burn_drive *d, struct burn_disc **disc,
                         struct isoburn_source_opts *opts);


/** Create a disc object for producing a new image from a previous image
    plus the changes made by user. The generated burn_disc is suitable
    to be written to any other libburn drive. You must not use the same drive
    for writing as you are using here as source, because data will be
    read from the source drive while the target drive gets written to.
    The resulting burn_disc object has to be disposed when all its writing
    is done and the drive is BURN_DRIVE_IDLE again after asynchronous
    burn_disc_write().
    @param d The source drive, grabbed with isoburn_drive_scan_and_grab().
    @param disc Returns the newly created burn_disc object.
    @return <=0 error , 1 = success
*/
int isoburn_prepare_new_image(struct burn_drive *d, struct burn_disc **disc,
                              struct isoburn_source_opts *opts);

/** Start writing of the new session.
    This call is asynchrounous. I.e. it returns quite soon and the progress has
    to be watched by a loop with call burn_drive_get_status() until
    BURN_DRIVE_IDLE is returned.
    Wrapper for: burn_disc_write()
*/
void isoburn_disc_write(struct burn_write_opts *o, struct burn_disc *disc);


/** Inquire state and fill parameters of the fifo which is attached to
    the emerging track. This should be done in the pacifier loop while
    isoburn_disc_write() or burn_disc_write() are active.
    Hint: If only burn_write_opts and not burn_drive is known, then the drive
          can be obtained by burn_write_opts_get_drive().
    @parm d      The drive to which the track with the fifo gets burned.
    @param size  The total size of the fifo
    @param free_bytes  The current free capacity of the fifo
    @param status_text  Returns a pointer to a constant text, see below
    @return  <0 reply invalid, >=0 fifo status code:
             bit0+1=input status, bit2=consumption status, i.e:
             0="standby"   : data processing not started yet
             1="active"    : input and consumption are active
             2="ending"    : input has ended without error
             3="failing"   : input had error and ended,
             4="unused"    : ( consumption has ended before processing start )
             5="abandoned" : consumption has ended prematurely
             6="ended"     : consumption has ended without input error
             7="aborted"   : consumption has ended after input error
*/
int isoburn_get_fifo_status(struct burn_drive *d, int *size, int *free_bytes,
                            char **status_text);


/** Inquire whether the most recent write run was successful.
    Wrapper for: burn_drive_wrote_well()
*/
int isoburn_drive_wrote_well(struct burn_drive *d);


/** Call this after isoburn_disc_write has finished and burn_drive_wrote_well()
    indicates success. It will eventually complete the emulation of
    multi-session functionality, if needed at all. Let libisoburn decide.
    Not a wrapper, but peculiar to libisoburn.
*/
int isoburn_activate_session(struct burn_drive *drive);


/** Write a new session to a disc.
    This is a synchronous call equivalent to isoburn_prepare_disc +
    isoburn_disc_write + isoburn_activate_session
    @param pacifier_func If not NULL: a function to produce appeasing messages.
                         See burn_abort_pacifier() in libburn.h for an example.
*/
/* TODO implement this */
int isoburn_perform_write(struct burn_write_opts *o,
                          int (*pacifier_func)(void *handle, int patience, 
                                               int elapsed));

/** Release an aquired drive.
    Wrapper for: burn_drive_release()
*/
void isoburn_drive_release(struct burn_drive *drive, int eject);


/** Shutdown all three libraries.
    Wrapper for : iso_finish() and burn_finish().
*/
void isoburn_finish(void);


/*
    The following two calls are for expert applications only.
    An application should have a special reason to use them.
*/


/** Inquire wether the media needs emulation or would be suitable for
    generic multi-session via libburn.
    @return 0 is generic multi-session 
            1 is emulated multi-session
           -1 is not suitable for isoburn
*/
int isoburn_needs_emulation(struct burn_drive *drive);