diff --git a/libburn/trunk/cdrskin/cdrskin_timestamp.h b/libburn/trunk/cdrskin/cdrskin_timestamp.h index 6164fbee..af8a0ed0 100644 --- a/libburn/trunk/cdrskin/cdrskin_timestamp.h +++ b/libburn/trunk/cdrskin/cdrskin_timestamp.h @@ -1 +1 @@ -#define Cdrskin_timestamP "2006.12.21.122533" +#define Cdrskin_timestamP "2006.12.21.200556" diff --git a/libburn/trunk/libburn/libdax_msgs.h b/libburn/trunk/libburn/libdax_msgs.h index f98b9b4d..4b11bbad 100644 --- a/libburn/trunk/libburn/libdax_msgs.h +++ b/libburn/trunk/libburn/libdax_msgs.h @@ -341,6 +341,7 @@ Range "scdbackup" : 0x00020000 to 0x0002ffff 0x00020121 (FATAL,HIGH) = Write preparation setup failed 0x00020122 (FATAL,HIGH) = SCSI error on format_unit 0x00020123 (SORRY,HIGH) = DVD Media are unsuitable for desired track type + 0x00020124 (SORRY,HIGH) = SCSI error on set_streaming libdax_audioxtr: 0x00020200 (SORRY,HIGH) = Cannot open audio source file diff --git a/libburn/trunk/libburn/mmc.c b/libburn/trunk/libburn/mmc.c index b0d0888b..e6461ef3 100644 --- a/libburn/trunk/libburn/mmc.c +++ b/libburn/trunk/libburn/mmc.c @@ -34,12 +34,9 @@ extern struct libdax_msgs *libdax_messenger; -/* ts A61219 : ! HIGHLY EXPERIMENTAL ! - Based on knowlege from dvd+rw-tools-7.0 and mmc5r03c.pdf -*/ -/* +/* ts A61219 : Based on knowlege from dvd+rw-tools-7.0 and mmc5r03c.pdf */ #define Libburn_support_dvd_plus_rW 1 -*/ + /* Progress report (with Libburn_support_dvd_plus_rW defined): ts A61219 : It seems to work with a used (i.e. thoroughly formatted) DVD+RW. Error messages of class DEBUG appear because of inability to @@ -47,8 +44,17 @@ extern struct libdax_msgs *libdax_messenger; ts A61220 : Burned to a virgin DVD+RW by help of new mmc_format_unit() (did not test wether it would work without). Burned to a not completely formatted DVD+RW. (Had worked before without - mmc_format_unit(). I did not exceed the formatted range - as reported by dvd+rw-mediainfo. + mmc_format_unit() but i did not exceed the formatted range + as reported by dvd+rw-mediainfo.) + ts A61221 : Speed setting now works for both of my drives. The according + functions in dvd+rw-tools are a bit intimidating to the reader. + I hope it is possible to leave much of this to the drive. + And if it fails ... well, it's only speed setting. :)) +Todo: + Determine media capacity. + Determine drive+media speed options. + Determine first free lba for appending data. + Determine start lba of most recent mkisofs session. */ @@ -77,11 +83,17 @@ static unsigned char MMC_SEND_CUE_SHEET[] = { 0x5D, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; /* ts A61023 : get size and free space of drive buffer */ -static unsigned char MMC_READ_BUFFER_CAPACITY[] = { 0x5C, 0, 0, 0, 0, 0, 0, 16, 0, 0 }; +static unsigned char MMC_READ_BUFFER_CAPACITY[] = + { 0x5C, 0, 0, 0, 0, 0, 0, 16, 0, 0 }; /* ts A61219 : format DVD+RW (and various others) */ static unsigned char MMC_FORMAT_UNIT[] = { 0x04, 0x11, 0, 0, 0, 0 }; +/* ts A61221 : + To set speed for DVD media (0xBB is for CD but works on my LG GSA drive) */ +static unsigned char MMC_SET_STREAMING[] = + { 0xB6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; + static int mmc_function_spy_do_tell = 0; @@ -854,9 +866,94 @@ void mmc_perform_opc(struct burn_drive *d) d->issue_command(d, &c); } + +/* ts A61221 : Learned much from dvd+rw-tools-7.0 set_speed_B6h() but then + made own experiments on base of mmc5r03c.pdf 6.8.3 and 6.39 in the hope + to achieve a leaner solution */ +int mmc_set_streaming(struct burn_drive *d, int r_speed, int w_speed) +{ + struct buffer buf; + struct command c; + int b, end_lba; + char msg[160]; + unsigned char *pd; + + mmc_function_spy("mmc_format_unit"); + + if (r_speed <= 0) + r_speed = 0x10000000; /* ~ 2 TB/s */ + if (w_speed <= 0) + w_speed = 0x10000000; /* ~ 2 TB/s */ + c.retry = 1; + c.oplen = sizeof(MMC_SET_STREAMING); + memcpy(c.opcode, MMC_SET_STREAMING, sizeof(MMC_SET_STREAMING)); + c.page = &buf; + c.page->bytes = 28; + c.opcode[9] = (c.page->bytes >> 8) & 0xff; + c.opcode[10] = c.page->bytes & 0xff; + c.page->sectors = 0; + c.dir = TO_DRIVE; + memset(c.page->data, 0, c.page->bytes); + pd = c.page->data; + + /* Trying to avoid inquiry of available speed descriptors but rather + to allow the drive to use the liberties of Exact==0. + */ + pd[0] = 0; /* WRC=0 (Default Rotation Control), RDD=Exact=RA=0 */ + + /* >>> This is computed from 4.7e9. Need to obtain media capacity.*/ + end_lba = 2294921 - 1; + /* overstatement (gross or not) works for my NEC, but not for my LG */ + /* end_lba = 0x10000000; / * ~ 2 TB */ + + /* start_lba is 0 , 1000 = 1 second as base time for data rate */ + for (b = 0; b < 4 ; b++) { + pd[8+b] = (end_lba >> (24 - 8 * b)) & 0xff; + pd[12+b] = (r_speed >> (24 - 8 * b)) & 0xff; + pd[16+b] = (1000 >> (24 - 8 * b)) & 0xff; + pd[20+b] = (w_speed >> (24 - 8 * b)) & 0xff; + pd[24+b] = (1000 >> (24 - 8 * b)) & 0xff; + } + +/* <<< + fprintf(stderr,"LIBBURN_EXPERIMENTAL : B6h Performance descriptor:\n"); + for (b = 0; b < 28 ; b++) + fprintf(stderr, "%2.2X%c", pd[b], ((b+1)%4 ? ' ' : '\n')); +*/ + + + d->issue_command(d, &c); + if (c.error) { + if (c.sense[2]!=0 && !d->silent_on_scsi_error) { + sprintf(msg, + "SCSI error on set_streaming(%d): key=%X asc=%2.2Xh ascq=%2.2Xh", + w_speed, + c.sense[2],c.sense[12],c.sense[13]); + libdax_msgs_submit(libdax_messenger, + d->global_index, + 0x00020124, + LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH, + msg, 0, 0); + } + return 0; + } + return 1; +} + + void mmc_set_speed(struct burn_drive *d, int r, int w) { struct command c; + int ret; + + mmc_function_spy("mmc_set_speed"); + + /* ts A61221 : try to set DVD speed via command B6h */ + if (strstr(d->current_profile_text, "DVD") == d->current_profile_text){ + ret = mmc_set_streaming(d, r, w); + if (ret != 0) + return; /* success or really fatal failure */ + } /* ts A61112 : MMC standards prescribe FFFFh as max speed. But libburn.h prescribes 0. */ @@ -865,7 +962,6 @@ void mmc_set_speed(struct burn_drive *d, int r, int w) if (w<=0 || w>0xffff) w = 0xffff; - mmc_function_spy("mmc_set_speed"); memcpy(c.opcode, MMC_SET_SPEED, sizeof(MMC_SET_SPEED)); c.retry = 1; c.oplen = sizeof(MMC_SET_SPEED);