Made support for DVD+R DL official, enabled untested support for BD-RE

libburn/trunk/cdrskin/cdrskin.1

@@ -16,8 +16,8 @@
 .\" .sp <n>    insert n+1 empty lines
 .\" for manpage-specific macros, see man(7)
 .SH NAME
-cdrskin \- burns preformatted data to CD-R[W], DVD-R[W], DVD+R[W], DVD-RAM
+cdrskin \- burns preformatted data to CD-R[W], DVD-R[W], DVD+R[W], DVD+R/DL,
-via libburn.
+DVD-RAM via libburn.
 .SH SYNOPSIS
 .B cdrskin
 .RI [ options | track_source_addresses ]
@@ -44,7 +44,7 @@ or in Session at Once mode for seamless tracks.
 .br
 Multi session on CD (follow-up sessions in TAO only)
 .br
-or on DVD-R[W] (in Incremental mode) or on DVD+R.
+or on DVD-R[W] (in Incremental mode) or on DVD+R[/DL].
 .br
 Single session on DVD-RW or DVD-R (Disk-at-once).
 .br
@@ -163,7 +163,7 @@ Multiple cycles of blanking and overwriting with random numbers might be.
 .SS
 .B Sequentially Recordable DVD Media:
 .br
-Currently DVD-RW, DVD-R and DVD+R can be used for the Sequential recording
+Currently DVD-RW, DVD-R and DVD+R[/DL] can be used for the Sequential recording
 model.
 .br
 DVD-RW must be in state "Sequential Recording".
@@ -198,9 +198,9 @@ unpredicted length and to keep media appendable by option
 The only restriction towards CD-R[W] is the lack of support for -audio tracks.
 Multiple tracks per session are permissible.
 .br
-The write modes for DVD+R resemble those with DVD-R except that with DVD+R
+The write modes for DVD+R[/DL] resemble those with DVD-R except that with +R
 each track gets wrapped in an own session. There is no -dummy writing with
-DVD+R.
+DVD+R[/DL].
 .br
 Quite deliberately write mode -sao insists in the tradition of a predicted
 track size and blank media, whereas -tao writes the tracks open ended and
@@ -598,7 +598,7 @@ One should use it only if inavoidable.
 .TP
 .BI \-sao
 Write CD in Session At Once mode, a sequential DVD-R[W] in Disc-at-once
-(DAO) mode, or a DVD+R.
+(DAO) mode, or a DVD+R[/DL].
 .br
 With CD this mode is able to put several audio tracks on media without
 producing audible gaps between them.
@@ -606,8 +606,8 @@ producing audible gaps between them.
 With DVD-R[W] this mode can only write a single track.
 No -multi is allowed with DVD-R[W] -sao.
 .br
--sao is permissible with overwriteable DVD and with DVD+R but actually only
+-sao is permissible with overwriteable DVD and with DVD+R[/DL] but actually
-imposes restrictions without providing known advantages. 
+only imposes restrictions without providing known advantages. 
 .br
 -sao can only be used for tracks of fixely predicted size. This implies that
 track arguments which depict stdin or named pipes need to be preceeded by
@@ -647,7 +647,7 @@ suffix ".wav".
 .TP
 .BI \-tao
 Write CD in Track At Once (TAO) mode, sequential DVD-R[W] in Incremental
-Streaming mode, or DVD+R without traditional -sao restrictions.
+Streaming mode, or DVD+R[/DL] without traditional -sao restrictions.
 This mode also applies pro-forma to overwriteable DVD media.
 .br
 Mode -tao can be used with track sources of unpredictable size, like standard
@@ -951,7 +951,7 @@ tested. Currently this applies to :
 .br
 Profile 0015h , DVD-R/DL Sequential (will not allow -multi).
 .br
-Profile 002Bh , DVD+R/DL.
+Profile 0043h , BD-RE.
 .br
 If you really test such media, then please report the outcome on
 libburn-hackers@pykix.org 
@@ -1131,7 +1131,7 @@ cdrskin -v dev=0,1,0 fs=32m speed=8 \\
 .br
 -tao padsize=300k -
 .SS
-.B Write multi-session to the same CD, DVD-R[W] or DVD+R:
+.B Write multi-session to the same CD, DVD-R[W] or DVD+R[/DL]:
 .br
 cdrskin dev=/dev/hdc -v padsize=300k -multi -tao 1.iso
 .br

libburn/trunk/cdrskin/cdrskin_timestamp.h

@@ -1 +1 @@
-#define Cdrskin_timestamP "2008.02.22.213726"
+#define Cdrskin_timestamP "2008.02.28.123152"

libburn/trunk/libburn/libburn.h

@@ -730,7 +730,7 @@ void burn_preset_device_open(int exclusive, int blocking, int abort_on_busy);
 /** Allows the use of media types which are implemented in libburn but not yet
     tested. The list of those untested profiles is subject to change.
     Currently it contains: 0x15 "DVD-R/DL sequential recording",
-                           0x2b "DVD+R/DL"
+                           0x43 "BD-RE"
     If you really test such media, then please report the outcome on
     libburn-hackers@pykix.org
     If ever then this call should be done soon after burn_initialize() before
@@ -1093,10 +1093,11 @@ off_t burn_disc_available_space(struct burn_drive *d,
     0x09 "CD-R",                          0x0a "CD-RW",
     0x11 "DVD-R sequential recording",    0x12 "DVD-RAM",
     0x13 "DVD-RW restricted overwrite",   0x14 "DVD-RW sequential recording",
-    0x1a "DVD+RW",                        0x1b "DVD+R".
+    0x1a "DVD+RW",                        0x1b "DVD+R"
+    0x2b "DVD+R/DL"
     If enabled by burn_allow_untested_profiles() it also writes to profiles
-    0x15 "DVD-R/DL sequential recording", 0x2b "DVD+R/DL".
+    0x15 "DVD-R/DL sequential recording", 0x43 "BD-RE".
-    Writeable stdio-drives return this profile
+    Writeable stdio-drives return this profile:
     0xffff "stdio file"
     @param d The drive where the media is inserted.
     @param pno Profile Number as of mmc5r03c.pdf, table 89

libburn/trunk/libburn/mmc.c

@@ -306,8 +306,9 @@ int mmc_read_track_info(struct burn_drive *d, int trackno, struct buffer *buf,
 	c.opcode[1] = 1;
 	if(trackno<=0) {
 		if (d->current_profile == 0x1a || d->current_profile == 0x13 ||
-		    d->current_profile == 0x12 )
+		    d->current_profile == 0x12 || d->current_profile == 0x43)
-			 /* DVD+RW , DVD-RW restricted overwrite , DVD-RAM */
+			 /* DVD+RW , DVD-RW restricted overwrite , DVD-RAM
+			    BD-RE */
 			trackno = 1;
 		else if (d->current_profile == 0x10 ||
 			 d->current_profile == 0x11 ||
@@ -349,7 +350,7 @@ int mmc_get_nwa(struct burn_drive *d, int trackno, int *lba, int *nwa)
 	*nwa = mmc_four_char_to_int(data + 12);
 	num = mmc_four_char_to_int(data + 16);
 	if (d->current_profile == 0x1a || d->current_profile == 0x13 ||
-	    d->current_profile == 0x12) {
+	    d->current_profile == 0x12 || d->current_profile == 0x43) {
 		 /* overwriteable */
 		*lba = *nwa = num = 0;
 	} else if (!(data[7]&1)) {
@@ -1490,7 +1491,7 @@ static int mmc_read_disc_info_al(struct burn_drive *d, int *alloc_len)
 	   ts A70112 : same for DVD-RAM
 	*/
 	if (d->current_profile == 0x1a || d->current_profile == 0x13 ||
-	    d->current_profile == 0x12)
+	    d->current_profile == 0x12 || d->current_profile == 0x43)
 		d->status = BURN_DISC_BLANK;
 
 	if (d->status == BURN_DISC_BLANK) {
@@ -2104,7 +2105,8 @@ static int mmc_get_configuration_al(struct burn_drive *d, int *alloc_len)
 		d->current_is_supported_profile = 1;
 #endif
 #ifdef Libburn_support_dvd_raM
-	if (cp == 0x12)
+	if (cp == 0x12 || (cp == 0x43 && burn_support_untested_profiles))
+							/* DVD-RAM , BD-RE */
 		d->current_is_supported_profile = 1;
 #endif
 #ifdef Libburn_support_dvd_r_seQ
@@ -2114,8 +2116,7 @@ static int mmc_get_configuration_al(struct burn_drive *d, int *alloc_len)
 		d->current_is_supported_profile = 1;
 #endif
 #ifdef Libburn_support_dvd_plus_R
-	if (cp == 0x1b || (cp == 0x2b && burn_support_untested_profiles))
+	if (cp == 0x1b || cp == 0x2b) /* DVD+R , DVD+R/DL */
-						/* DVD+R , DVD+R/DL */
 		d->current_is_supported_profile = 1;
 #endif
 
@@ -3004,8 +3005,9 @@ int mmc_compose_mode_page_5(struct burn_drive *d,
 		pd[13] = 16;
 
 	} else if (d->current_profile == 0x1a || d->current_profile == 0x1b ||
-	           d->current_profile == 0x2b || d->current_profile == 0x12) {
+	           d->current_profile == 0x2b || d->current_profile == 0x12 ||
-		/* not with DVD+R[W][/DL] or DVD-RAM */;
+		   d->current_profile == 0x43) {
+		/* not with DVD+R[W][/DL] or DVD-RAM or BD-RE */;
 		return 0;
 	} else {
 		/* Traditional setup for CD */

libburn/trunk/libburn/spc.c

@@ -580,7 +580,7 @@ void spc_sense_write_params(struct burn_drive *d)
 
 	/* ts A70212 : try to setup d->media_capacity_remaining */
 	if (d->current_profile == 0x1a || d->current_profile == 0x13 ||
-	    d->current_profile == 0x12)
+	    d->current_profile == 0x12 || d->current_profile == 0x43)
 		d->read_format_capacities(d, -1);
 	else if (d->status == BURN_DISC_BLANK ||
 	     (d->current_is_cd_profile && d->status == BURN_DISC_APPENDABLE)) {

libburn/trunk/libburn/write.c

@@ -967,8 +967,9 @@ int burn_precheck_write(struct burn_write_opts *o, struct burn_disc *disc,
 	if (d->status == BURN_DISC_UNSUITABLE)
 		goto unsuitable_profile;
 	if (d->drive_role == 2 ||
-		d->current_profile == 0x1a || d->current_profile == 0x12) { 
+		d->current_profile == 0x1a || d->current_profile == 0x12 ||
-		/* DVD+RW , DVD-RAM , emulated drive on stdio file */
+		d->current_profile == 0x43) { 
+		/* DVD+RW , DVD-RAM , BD-RE, emulated drive on stdio file */
 		if (o->start_byte >= 0 && (o->start_byte % 2048))
 			strcat(reasons,
 			 "write start address not properly aligned to 2048, ");
@@ -1370,8 +1371,8 @@ int burn_dvd_write_session(struct burn_write_opts *o,
 		ret = burn_disc_close_session_dvd_minus_r(o, s);
 		if (ret <= 0)
 			return 0;
-	} else if (d->current_profile == 0x12) {
+	} else if (d->current_profile == 0x12 || d->current_profile == 0x43) {
-		/* DVD-RAM */
+		/* DVD-RAM , BD-RE */
 		/* ??? any finalization needed ? */;
 	} else if (d->current_profile == 0x13) {
 		/* DVD-RW restricted overwrite */
@@ -1522,8 +1523,9 @@ int burn_dvd_write_sync(struct burn_write_opts *o,
 
 	d->needs_close_session = 0;
 
-	if (d->current_profile == 0x1a || d->current_profile == 0x12) { 
+	if (d->current_profile == 0x1a || d->current_profile == 0x12 ||
-		/* DVD+RW , DVD-RAM */
+	    d->current_profile == 0x43) { 
+		/* DVD+RW , DVD-RAM , BD-RE */
 		ret = 1;
 		if (d->current_profile == 0x1a)
 			ret = burn_disc_setup_dvd_plus_rw(o, disc);
@@ -2191,6 +2193,8 @@ int burn_random_access_write(struct burn_drive *d, off_t byte_address,
 		alignment = 32 * 1024;
 	if (d->current_profile == 0x1a) /* DVD+RW */
 		alignment = 2 * 1024;
+	if (d->current_profile == 0x43) /* BD-RE */
+		alignment = 2 * 1024;
 	if (alignment == 0) {
 		sprintf(msg, "Write start address not supported");
 		libdax_msgs_submit(libdax_messenger, d->global_index,