libburnia/legacy
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Reacted on some of the complaints of codespell

Browse Source
This commit is contained in:
Thomas Schmitt 2016-07-23 10:40:43 +00:00
parent 9e05834c08
commit 5f617323de
29 changed files with 122 additions and 119 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
libburn/trunk/README
View File

@ -255,7 +255,7 @@ Project history as far as known to me:
which by about nearly everybody else was perceived as unfriendly fork.
Derek Foreman four days later posted a message which expressed his
discontent.
The situation first caused me to publically regret it and then - after i
The situation first caused me to publicly regret it and then - after i
got the opportunity to move in with cdrskin - gave me true reason to
personally apologize to Derek Foreman, Ben Jansens and the contributors at
icculus.org/burn. Posted to both projects:
@ -329,7 +329,7 @@ Project history as far as known to me:
and write modes, and better protection against typical user mishaps.
- 24th October 2007 version 0.4.0 is the foundation of new library libisoburn
and an upcomming integrated application for manipulating and writing
and an upcoming integrated application for manipulating and writing
ISO 9660 + Rock Ridge images. cdrskin-0.4.0 got capabilities like growisofs
by these enhancements: growing of overwriteable media and disk files.
Taking again a bow towards Andy Polyakov.
@ -389,7 +389,7 @@ Project history as far as known to me:
and cdrecord style. xorriso now can serve underneath growisofs.
- 20th Aug 2008 libburn-0.5.2 revokes the necessity that a drive must be
enumerable in order to be adressable. Enumeration is enhanced by examining
enumerable in order to be addressable. Enumeration is enhanced by examining
/proc/sys/dev/cdrom/info.
- 24th Aug 2008 libisoburn/xorriso-0.2.4 introduces a media readability check
@ -421,7 +421,7 @@ Project history as far as known to me:
signature, and for producing ISO images with MBR which boot from hard disk
or USB stick. Three minor bugs were fixed.
- 7th Dec 2008 libburn-0.5.8 prevents a SIGSEGV with wierd CD table-of-content
- 7th Dec 2008 libburn-0.5.8 prevents a SIGSEGV with weird CD table-of-content
and improves BD-RE formatting.
- 9th Dec 2008 Our project received a donation from Thomas Weber.
@ -646,7 +646,7 @@ Project history as far as known to me:
- Sat Jun 18 2011 release 1.1.0:
The consumption of stack memory was reduced. Statical program analysis found
some rarely occuring memory leaks. Several small bugs were fixed.
some rarely occurring memory leaks. Several small bugs were fixed.
The suffix .plXY was dropped from tarball names of libburn and libisoburn.
- Mon Jun 20 2011 patch release libburn-1.1.0.pl01:
@ -683,10 +683,10 @@ Project history as far as known to me:
- Mon Apr 02 2012 release 1.2.2:
The handling of intentional deviations from ECMA-119 specifications has
been improved in libisofs. libisoburn and xorriso now make use of these
improvements. Some rarely occuring bugs have been fixed.
improvements. Some rarely occurring bugs have been fixed.
- Fri Jul 20 2012 release 1.2.4:
libburn and libisofs got some rarely occuring bugs fixed. libisofs learned
libburn and libisofs got some rarely occurring bugs fixed. libisofs learned
to produce HFS+ metadata and Apple Partition Map. The capabilities of
isohybrid options --efi and --mac have been implemented (GPT and APM).
@ -697,7 +697,7 @@ Project history as far as known to me:
xorriso-tcltk
- Mon Mar 18 2013 release 1.2.8:
Some rarely occuring bugs were fixed in libisofs and libburn. libburn's
Some rarely occurring bugs were fixed in libisofs and libburn. libburn's
handling of incomplete sessions has been improved. xorriso's mkisofs
emulation learned to set El Torito section id strings.
@ -712,7 +712,7 @@ Project history as far as known to me:
Regression introduced by version 1.2.8.
- Fri Aug 07 2013 release 1.3.2:
cdrskin has aquired the capability to copy audio tracks to .wav files.
cdrskin has acquired the capability to copy audio tracks to .wav files.
It can extract CD-TEXT in a form that is readable for humans and for
cdrskin itself. Several small bugs were fixed in xorriso. Its capabilities
to serve frontend programs in dialog mode have been improved.
@ -721,7 +721,7 @@ Project history as far as known to me:
A long standing hidden bug was fixed, which affected inspection of
unformatted DVD+RW.
xorriso now by default puts EL Torito boot images to low block addresses.
It can report and set read speeds. Several rarely occuring bugs were fixed.
It can report and set read speeds. Several rarely occurring bugs were fixed.
- Tue Mar 04 2014 release 1.3.6:
libburn learned to operate optical drives and media on NetBSD. libisofs got

6
libburn/trunk/cdrskin/README
View File

@ -206,7 +206,7 @@ See output of command
If you have use cases for them, please report your wishes and expectations.
On the other hand, the capability of multi-session and of writing streams
of unpredicted lenght surpass the current DVD capabilities of cdrecord.
of unpredicted length surpass the current DVD capabilities of cdrecord.
Inspiration and Standard
@ -357,7 +357,7 @@ but leaves the media in "intermediate" state. In the first session of writing
one may only write sequentially to such a DVD. After that, it gets random
addressable by cdrskin. DVD-ROM drives might show ill behavior with them.
blank=format_overwrite_full uses preferrably "Full Format" (type 00h).
blank=format_overwrite_full uses preferably "Full Format" (type 00h).
This formatting lasts as long as writing a full DVD. It includes writing of
lead-out which is said to be good for DVD ROM compatibility.
@ -526,7 +526,7 @@ Run cdrskin by
The following settings will make pfexec keep original UID and EUID and prevent
most superuser powers. Be aware that you still can manipulate all device files
if you have the file permissions for that.
Full root privileges for cdrskin can then be aquired only by command su.
Full root privileges for cdrskin can then be acquired only by command su.
Edit /etc/security/exec_attr and add this line to the other "Media Backup"
lines:

4
libburn/trunk/cdrskin/cdrfifo.c
View File

@ -1,5 +1,5 @@
/*
cdrfifo.c , Copyright 2006 Thomas Schmitt <scdbackup@gmx.net>
cdrfifo.c , Copyright 2006 - 2016 Thomas Schmitt <scdbackup@gmx.net>
A fd-to-fd or fd-to-memory fifo to be used within cdrskin or independently.
By chaining of fifo objects, several fifos can be run simultaneously
@ -799,7 +799,7 @@ ex:;
/** Check for pending data at the fifo's source file descriptor and wether the
fifo is ready to take them. Simultaneously check the buffer for existing
data and the destination fd for readiness to accept some. If so, a small
chunk of data is transfered to and/or from the fifo.
chunk of data is transferred to and/or from the fifo.
This is done for the given fifo object and all members of its next-chain.
The check and transactions are repeated until a given timespan has elapsed.
libburn applications call this function in the burn loop instead of sleep().

4
libburn/trunk/cdrskin/cdrfifo.h
View File

@ -1,6 +1,6 @@
/*
cdrfifo.c , Copyright 2006 Thomas Schmitt <scdbackup@gmx.net>
cdrfifo.c , Copyright 2006 - 2016 Thomas Schmitt <scdbackup@gmx.net>
A fd-to-fd or fd-to-memory fifo to be used within cdrskin or independently.
By chaining of fifo objects, several fifos can be run simultaneously
@ -136,7 +136,7 @@ int Cdrfifo_adopt_iso_fs_descr(struct CdrfifO *o, char **pt, int flag);
/** Check for pending data at the fifo's source file descriptor and wether the
fifo is ready to take them. Simultaneously check the buffer for existing
data and the destination fd for readiness to accept some. If so, a small
chunk of data is transfered to and/or from the fifo.
chunk of data is transferred to and/or from the fifo.
This is done for the given fifo object and all members of its next-chain.
The check and transactions are repeated until a given timespan has elapsed.
libburn applications call this function in the burn loop instead of sleep().

8
libburn/trunk/cdrskin/cdrskin.c
View File

@ -1906,7 +1906,7 @@ static char Cdrpreskin_sys_rc_nameS[Cdrpreskin_rc_nuM][80]= {
*/
struct CdrpreskiN {
/* to be transfered into skin */
/* to be transferred into skin */
int verbosity;
char queue_severity[81];
char print_severity[81];
@ -3329,7 +3329,7 @@ ex:;
/** List of furter wishes towards libburn:
- a possibilty to implement cdrskin -reset
- a possibility to implement cdrskin -reset
*/
@ -3358,7 +3358,7 @@ static double Cdrskin_libburn_bd_speed_factoR= 4495.625;
/* The effective speed conversion factor for burn_drive_set_speed() */
static double Cdrskin_libburn_speed_factoR= 176.4;
/** Add-on for burn_drive_set_speed() to accomodate to the slightley oversized
/** Add-on for burn_drive_set_speed() to accommodate to the slightly oversized
speed ideas of my LG DVDRAM GSA-4082B. LITE-ON LTR-48125S tolerates it.
*/
static double Cdrskin_libburn_cd_speed_addoN= 40.0;
@ -3476,7 +3476,7 @@ struct CdrskiN {
int tell_media_space; /* actually do not burn but tell the available space */
int burnfree;
/** The write mode (like SAO or TAO). See libburn.
Controled by preskin->write_mode_name */
Controlled by preskin->write_mode_name */
enum burn_write_types write_type;
int block_type;
int multi;

2
libburn/trunk/cdrskin/cdrskin_timestamp.h
View File

@ -1 +1 @@
#define Cdrskin_timestamP "2016.07.21.175105"
#define Cdrskin_timestamP "2016.07.23.104100"

4
libburn/trunk/cdrskin/wiki_plain.txt
View File

@ -85,7 +85,7 @@ Option blank= offers several specialized blanking and formatting types,
which one may use for particular purposes on DVD-RW, DVD-RAM and BD-RE.
(See also below: blank=format_overwrite)
The drive offers a list of possible formats by cdrskin option --list_formats.
One should aquire MMC background information before making use of them.
One should acquire MMC background information before making use of them.
--------------------------------------------------------------------------
@ -263,7 +263,7 @@ would be the appropriate translation:
{{{
dev_translation=+0,0,0+/dev/hdc
}}}
The "+" character is a separator to be choosen by you.
The "+" character is a separator to be chosen by you.
Currently i am not aware of the need to choose any other than "+"
unless you get playful with custom translations like
{{{

5
libburn/trunk/doc/cookbook.txt
View File

@ -803,7 +803,7 @@ Two format types are relevant for DVD-RAM : 00h and 01h.
00h offers the default size format and usually a maximum payload size format.
Even with that maximum size payload there is hardware defect management.
(mmc5r03c.pdf 6.5.4.2.1.2)
01h can convert payload capacity into spare blocks for defect managment.
01h can convert payload capacity into spare blocks for defect management.
There is no way to increase payload capacity by format 01h.
(mmc5r03c.pdf 6.5.4.2.2.1)
@ -895,7 +895,8 @@ The term "superblock" shall depict the first 64 KiB after the sbsector address.
ISO 9660 multi-session depends on typical TOC information in two ways:
It needs the superblock address MSC1 of the most recently recorded session and
it needs the Next Writeable Address NWA for which to prepare the adress offset.
it needs the Next Writeable Address NWA for which to prepare the address
offset.
The following is learned from growisofs and from ECMA-119:
http://www.ecma-international.org/publications/files/ECMA-ST/Ecma-119.pdf

5
libburn/trunk/doc/mediainfo.txt
View File

@ -34,7 +34,7 @@ CD-ROM media (0x08) cannot be inquired by command 43h READ TOC/PMA/ATIP.
in 6.26.3.6 Response Format 0100b: ATIP.
The minute, second, and frame number of lead-in can be read from byte 4 to 6
of the ATIP descriptor. The lead-out bytes are at position 8 to 10. The ATIP
descriptor is preceeded by a four byte header.
descriptor is preceded by a four byte header.
I could not find out yet whether (lead-in,lead-out) is mandatorily unique for
each particular media product.
@ -176,7 +176,7 @@ BD-R and BD-RE:
printf (" Media ID: %6.6s/%-3.3s\n",di+4+100,di+4+106);
= MMC-5 6.23.3.3.1 Format Code 00h: Disc Information (DI)
Table 288 says that Media Type Code (byte 1 of CDB) for BD media is 1.
Table 446 says that Disc Information is preceeded by 4 bytes of header.
Table 446 says that Disc Information is preceded by 4 bytes of header.
Table 448 says that bytes 0 to 1 are Disc Information Identifier "DI".
that bytes 8 to 10 are Disc Type Identifier
BDO for BD-ROM, BDW for BD-RE,
@ -1080,6 +1080,7 @@ OTCBRE 001 Optodisc Technology Corporation 1-2X HTL 25GB (12cm) [Blu]
"Moser Baer India Limited"
PHILIP R02 Moser Baer India Ltd 1-2X HTL 25GB [Blu]
PHILIP R04 Moser Baer India Ltd 1-4X HTL 25GB [Blu]
PHILIPR0 R04 TDK 4x 25 GB (own buy)
PHILIP W02 Moser Baer India Ltd 1-2X HTL 25GB [Blu]
"Philips"

2
libburn/trunk/libburn/async.c
View File

@ -271,7 +271,7 @@ int burn_drive_scan(struct burn_drive_info *drives[], unsigned int *n_drives)
return -1;
}
/* cant be anything working! */
/* cannot be anything working! */
/* ts A61006 */
/* a ssert(!(workers && workers->drive)); */

2
libburn/trunk/libburn/crc.c
View File

@ -51,7 +51,7 @@
of two elements "GF(2)". If bytes 0 .. M are given, then bit n of byte m
is mapped to the coefficient of x exponent (n + ((M - m) * 8) + 16).
I.e. they translate the bits into a polynomial with the highest bit
becomming the coefficient of the highest power of x. Then this polynomial
becoming the coefficient of the highest power of x. Then this polynomial
is multiplied by (x exp 16).
The set of all such polynomials forms a commutative ring. Its addition

12
libburn/trunk/libburn/drive.c
View File

@ -1,7 +1,7 @@
/* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */
/* Copyright (c) 2004 - 2006 Derek Foreman, Ben Jansens
Copyright (c) 2006 - 2014 Thomas Schmitt <scdbackup@gmx.net>
Copyright (c) 2006 - 2016 Thomas Schmitt <scdbackup@gmx.net>
Provided under GPL version 2 or later.
*/
@ -1499,7 +1499,7 @@ void burn_drive_info_free(struct burn_drive_info drive_infos[])
/* ts A60904 : This looks a bit weird. [ts A70907 : not any more]
burn_drive_info is not the manager of burn_drive but only its
spokesperson. To my knowlege drive_infos from burn_drive_scan()
spokesperson. To my knowledge drive_infos from burn_drive_scan()
are not memorized globally. */
free((void *) drive_infos);
@ -1507,7 +1507,7 @@ void burn_drive_info_free(struct burn_drive_info drive_infos[])
/* ts A70903 : THIS IS WRONG ! (disabled now)
It endangers multi drive usage.
This call is not entitled to delete all drives, only the
ones of the array which it recieves a parmeter.
ones of the array which it receives a parmeter.
Problem: It was unclear how many items are listed in drive_infos
Solution: Added a end marker element to any burn_drive_info array
@ -1833,7 +1833,7 @@ ex:;
/* ts A60823 */
/** Aquire a drive with known persistent address.
/** Acquire a drive with known persistent address.
*/
int burn_drive_scan_and_grab(struct burn_drive_info *drive_infos[], char* adr,
int load)
@ -1841,7 +1841,7 @@ int burn_drive_scan_and_grab(struct burn_drive_info *drive_infos[], char* adr,
unsigned int n_drives;
int ret, i;
/* check wether drive adress is already registered */
/* check wether drive address is already registered */
for (i = 0; i <= drivetop; i++)
if (drive_array[i].global_index >= 0)
if (strcmp(drive_array[i].devname, adr) == 0)
@ -3217,7 +3217,7 @@ int burn_drive_equals_adr(struct burn_drive *d1, char *adr2_in, int role2)
if (stat_ret1 == -1 || stat_ret2 == -1) {
if (stat_ret1 != -1 || stat_ret2 != -1)
{ret = 0; goto ex;}
/* one adress existing, one not */
/* one address existing, one not */
/* Two non-existing file objects */

46
libburn/trunk/libburn/libburn.h
View File

@ -842,7 +842,7 @@ void burn_set_scsi_logging(int flag);
@param exclusive
0 = no attempt to make drive access exclusive.
1 = Try to open only devices which are not marked as busy
and try to mark them busy if opened sucessfully. (O_EXCL
and try to mark them busy if opened successfully. (O_EXCL
on GNU/Linux , flock(LOCK_EX) on FreeBSD.)
2 = in case of a SCSI device, also try to open exclusively
the matching /dev/sr, /dev/scd and /dev/st .
@ -880,7 +880,7 @@ void burn_allow_untested_profiles(int yes);
/* ts A60823 */
/** Aquire a drive with known device file address.
/** Acquire a drive with known device file address.
This is the sysadmin friendly way to open one drive and to leave all
others untouched. It bundles the following API calls to form a
@ -902,12 +902,12 @@ void burn_allow_untested_profiles(int yes);
Different than with burn_drive_scan() it is allowed to call
burn_drive_scan_and_grab() without giving up any other scanned drives. So
this call can be used to get a collection of more than one aquired drives.
The attempt to aquire the same drive twice will fail, though.
this call can be used to get a collection of more than one acquired drives.
The attempt to acquire the same drive twice will fail, though.
Pseudo-drives:
burn_drive_scan_and_grab() is able to aquire virtual drives which will
burn_drive_scan_and_grab() is able to acquire virtual drives which will
accept options much like a MMC burner drive. Many of those options will not
cause any effect, though. The address of a pseudo-drive begins with
prefix "stdio:" followed by a path.
@ -1001,7 +1001,7 @@ void burn_drive_clear_whitelist(void);
burn_drive_scan() again.
@param n_drives Returns the number of drive items in drive_infos.
@return 0 while scanning is not complete
>0 when it is finished sucessfully,
>0 when it is finished successfully,
<0 when finished but failed.
*/
int burn_drive_scan(struct burn_drive_info *drive_infos[],
@ -1307,7 +1307,7 @@ int burn_drive_get_media_sno(struct burn_drive *d, char **sno, int *sno_len);
burn_drive_get_write_speed(), burn_drive_get_min_write_speed(),
burn_drive_get_start_end_lba(). The drive must be grabbed for this call.
@param drive The drive to query.
@return 1=sucess, 0=no valid ATIP info read, -1 severe error
@return 1=success, 0=no valid ATIP info read, -1 severe error
@since 0.2.6
*/
int burn_disc_read_atip(struct burn_drive *drive);
@ -1376,7 +1376,7 @@ char *burn_guess_cd_manufacturer(int m_li, int s_li, int f_li,
bit5= Disc is nominally erasable (Erasable bit)
This will be set with overwriteable media which
libburn normally considers to be unerasable blank.
@return 1 success, <= 0 an error occured
@return 1 success, <= 0 an error occurred
@since 0.7.2
*/
int burn_disc_get_cd_info(struct burn_drive *d, char disc_type[80],
@ -1400,7 +1400,7 @@ int burn_disc_get_cd_info(struct burn_drive *d, char disc_type[80],
bytes in text_packs divided by 18.
@param flag Bitfield for control purposes,
Unused yet. Submit 0.
@return 1 success, 0= no CD-TEXT found, < 0 an error occured
@return 1 success, 0= no CD-TEXT found, < 0 an error occurred
@since 1.2.0
*/
int burn_disc_get_leadin_text(struct burn_drive *d,
@ -1468,7 +1468,7 @@ int burn_disc_track_lba_nwa(struct burn_drive *d, struct burn_write_opts *o,
/* ts B10525 */
/** Tells whether a previous attempt to determine the Next Writeable Address
of the upcomming track reveiled that the READ TRACK INFORMATION Damage Bit
of the upcoming track reveiled that the READ TRACK INFORMATION Damage Bit
is set for this track and that no valid writable address is available.
See MMC-5 6.27.3.7 Damage Bit, 6.27.3.11 NWA_V (NWA valid)
@param d The drive to query.
@ -1692,7 +1692,7 @@ void burn_disc_erase(struct burn_drive *drive, int fast);
in state "Sequential Recording" (profile 0014h) which get formatted to
state "Restricted Overwrite" (profile 0013h). DVD+RW can be "de-iced"
by setting bit4 of flag. DVD-RAM and BD-RE may get formatted initially
or re-formatted to adjust their Defect Managment.
or re-formatted to adjust their Defect Management.
This function usually returns while the drive is still in the process
of formatting. The formatting is done, when burn_drive_get_status()
returns BURN_DRIVE_IDLE. This may be immediately after return or may
@ -1880,7 +1880,7 @@ int burn_drive_wrote_well(struct burn_drive *d);
/* ts B31023 */
/** Inquire whether a write error occured which is suspected to have happened
/** Inquire whether a write error occurred which is suspected to have happened
due to a false report about DVD-RW capability to be written in write type
BURN_WRITE_TAO.
@param d The drive to inquire.
@ -2645,7 +2645,7 @@ struct burn_disc *burn_drive_get_disc(struct burn_drive *d);
@param t The track to set the data source for
@param s The data source to use for the contents of the track
@return An error code stating if the source is ready for use for
writing the track, or if an error occured
writing the track, or if an error occurred
*/
enum burn_source_status burn_track_set_source(struct burn_track *t,
@ -2660,7 +2660,7 @@ enum burn_source_status burn_track_set_source(struct burn_track *t,
announced then the track will be padded up with zeros.
@param t The track to change
@param size The size to set
@return 0=failure 1=sucess
@return 0=failure 1=success
@since 0.3.4
*/
int burn_track_set_default_size(struct burn_track *t, off_t size);
@ -3268,7 +3268,7 @@ void burn_write_opts_set_obs_pad(struct burn_write_opts *opts, int pad);
/* ts A91115 */
/** Sets the rythm by which stdio pseudo drives force their output data to
/** Sets the rhythm by which stdio pseudo drives force their output data to
be consumed by the receiving storage device. This forcing keeps the memory
from being clogged with lots of pending data for slow devices.
@param opts The write opts to change
@ -3914,7 +3914,7 @@ int burn_is_aborting(int flag);
resulting struct burn_multi_caps elements .start_adr , .start_alignment ,
.start_range_low , .start_range_high .
Other than burn_disc_write() this is a synchronous call which returns
only after the write transaction has ended (sucessfully or not). So it is
only after the write transaction has ended (successfully or not). So it is
wise not to transfer giant amounts of data in a single call.
Important: Data have to fit into the already formatted area of the media.
@param d The drive to which to write
@ -3926,7 +3926,7 @@ int burn_is_aborting(int flag);
drive buffer without further data transfer).
@param flag Bitfield for control purposes:
bit0 = flush the drive buffer after eventual writing
@return 1=sucessful , <=0 : number of transfered bytes * -1
@return 1=successful , <=0 : number of transferred bytes * -1
@since 0.4.0
*/
int burn_random_access_write(struct burn_drive *d, off_t byte_address,
@ -3944,7 +3944,7 @@ int burn_random_access_write(struct burn_drive *d, off_t byte_address,
@param d The drive from which to read
@param capacity Will return the result if valid
@param flag Bitfield for control purposes: Unused yet, submit 0.
@return 1=sucessful , <=0 an error occured
@return 1=successful , <=0 an error occurred
@since 0.6.0
*/
int burn_get_read_capacity(struct burn_drive *d, int *capacity, int flag);
@ -3957,7 +3957,7 @@ int burn_get_read_capacity(struct burn_drive *d, int *capacity, int flag);
be aligned to 2048 bytes. Only data tracks with 2048 bytes per sector
can be read this way. I.e. not CD-audio, not CD-video-stream ...
This is a synchronous call which returns only after the full read job
has ended (sucessfully or not). So it is wise not to read giant amounts
has ended (successfully or not). So it is wise not to read giant amounts
of data in a single call.
@param d The drive from which to read
@param byte_address The start address of the read in byte (aligned to 2048)
@ -3973,7 +3973,7 @@ int burn_get_read_capacity(struct burn_drive *d, int *capacity, int flag);
with single block steps.
@since 0.5.2
bit3= return -2 on permission denied error rather than
issueing a warning message.
issuing a warning message.
@since 1.0.6
bit4= return -3 on SCSI error
5 64 00 ILLEGAL MODE FOR THIS TRACK
@ -3985,7 +3985,7 @@ int burn_get_read_capacity(struct burn_drive *d, int *capacity, int flag);
bit5= issue messages with severity DEBUG if they would
be suppressed by bit1.
@since 1.4.0
@return 1=sucessful , <=0 an error occured
@return 1=successful , <=0 an error occurred
with bit3: -2= permission denied error
@since 0.4.0
*/
@ -4032,7 +4032,7 @@ int burn_read_data(struct burn_drive *d, off_t byte_address,
bit5= issue messages with severity DEBUG if they would
be suppressed by bit1.
@since 1.4.0
@return 1=sucessful , <=0 an error occured
@return 1=successful , <=0 an error occurred
with bit3: -2= permission denied error
@since 1.2.6
*/
@ -4116,7 +4116,7 @@ int burn_drive_get_drive_role(struct burn_drive *d);
(role 2) or read-only (role 4) or write-only (role 5). See bit1.
@param allowed Bitfield for control purposes:
bit0= Enable roles 4 and 5 for drives which get
aquired after this call
acquired after this call
bit1= with bit0:
Test whether the file can be opened for
read-write, read-only, or write-only.

9
libburn/trunk/libburn/libdax_msgs.h
View File

@ -1,7 +1,7 @@
/* libdax_msgs
Message handling facility of libburn and libisofs.
Copyright (C) 2006-2011 Thomas Schmitt <scdbackup@gmx.net>,
Copyright (C) 2006-2016 Thomas Schmitt <scdbackup@gmx.net>,
provided under GPL version 2 or later.
*/
@ -266,8 +266,9 @@ int libdax_msgs_new(struct libdax_msgs **m, int flag);
/** Destroy a message handling facility and all its eventual messages.
The submitted pointer gets set to NULL.
Actually only the last destroy call of all offical references to the object
will really dispose it. All others just decrement the reference counter.
Actually only the last destroy call of all official references to the
object will really dispose it. All others just decrement the reference
counter.
Call this function only with official reference pointers obtained by
libdax_msgs_new() or libdax_msgs_refer(), and only once per such pointer.
@param flag Bitfield for control purposes (unused yet, submit 0)
@ -554,7 +555,7 @@ Range "scdbackup" : 0x00020000 to 0x0002ffff
0x0002016e (DEBUG,HIGH) = MODE SENSE page 2A too short
0x0002016f (DEBUG,HIGH) = Unable to grab scanned drive
0x00020170 (NOTE,HIGH) = Closing open session before writing new one
0x00020171 (NOTE,HIGH) = Closing BD-R with accidently open session
0x00020171 (NOTE,HIGH) = Closing BD-R with accidentaly open session
0x00020172 (SORRY,HIGH) = Read start address larger than number of readable blocks
0x00020173 (FAILURE,HIGH) = Drive tells NWA smaller than last written address
0x00020174 (SORRY,HIGH) = Fifo alignment does not allow desired read size

10
libburn/trunk/libburn/mmc.c
View File

@ -60,7 +60,7 @@ static int mmc_get_configuration_al(struct burn_drive *d, int *alloc_len);
extern struct libdax_msgs *libdax_messenger;
/* ts A61219 : Based on knowlege from dvd+rw-tools-7.0 and mmc5r03c.pdf */
/* ts A61219 : Based on knowledge from dvd+rw-tools-7.0 and mmc5r03c.pdf */
#define Libburn_support_dvd_plus_rW 1
/* ts A61229 */
@ -499,7 +499,7 @@ int mmc_get_nwa(struct burn_drive *d, int trackno, int *lba, int *nwa)
if (trackno > 0)
sprintf(msg, "Track number %d: ", trackno);
else
sprintf(msg, "Upcomming track: ");
sprintf(msg, "Upcoming track: ");
if (d->current_profile == 0x1a || d->current_profile == 0x13 ||
d->current_profile == 0x12 || d->current_profile == 0x43) {
/* overwriteable */
@ -1153,7 +1153,7 @@ err_ex:;
"Could not inquire TOC", 0,0);
d->status = BURN_DISC_UNSUITABLE;
d->toc_entries = 0;
/* Prefering memory leaks over fandangos */
/* Preferring memory leaks over fandangos */
d->toc_entry = calloc(1, sizeof(struct burn_toc_entry));
{ret = 0; goto ex;}
}
@ -1574,7 +1574,7 @@ static int mmc_read_toc_al(struct burn_drive *d, int *alloc_len)
"Could not inquire TOC", 0,0);
d->status = BURN_DISC_UNSUITABLE;
d->toc_entries = 0;
/* Prefering memory leaks over fandangos */
/* Preferring memory leaks over fandangos */
d->toc_entry = calloc(1, sizeof(struct burn_toc_entry));
{ret = 0; goto ex;}
}
@ -1785,7 +1785,7 @@ int mmc_read_multi_session_c1(struct burn_drive *d, int *trackno, int *start)
if (mmc_function_spy(d, "mmc_read_multi_session_c1") <= 0)
{ret = 0; goto ex;}
/* First try to evaluate the eventually loaded TOC before issueing
/* First try to evaluate the possibly loaded TOC before issuing
a MMC command. This search obtains the first track of the last
complete session which has a track.
*/

2
libburn/trunk/libburn/mmc.h
View File

@ -85,7 +85,7 @@ int mmc_four_char_to_int(unsigned char *data);
int mmc_read_track_info(struct burn_drive *d, int trackno, struct buffer *buf,
int alloc_len);
/* ts A70812 : return 0 = ok , return BE_CANCELLED = error occured */
/* ts A70812 : return 0 = ok , return BE_CANCELLED = error occurred */
int mmc_read_10(struct burn_drive *d, int start, int amount,
struct buffer *buf);

6
libburn/trunk/libburn/sector.c
View File

@ -1,7 +1,7 @@
/* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */
/* Copyright (c) 2004 - 2006 Derek Foreman, Ben Jansens
Copyright (c) 2006 - 2015 Thomas Schmitt <scdbackup@gmx.net>
Copyright (c) 2006 - 2016 Thomas Schmitt <scdbackup@gmx.net>
Provided under GPL version 2 or later.
*/
@ -912,7 +912,7 @@ void process_q(struct burn_drive *d, unsigned char *q)
}
break;
case 2:
/* XXX dont ignore these */
/* XXX do not ignore these */
break;
case 3:
/* burn_print(12, "ISRC data in mode 3 q\n");*/
@ -931,7 +931,7 @@ void process_q(struct burn_drive *d, unsigned char *q)
/* this needs more info. subs in the data? control/adr? */
/* ts A61119 : One should not use inofficial compiler extensions.
/* ts A61119 : One should not use unofficial compiler extensions.
>>> Some day this function needs to be implemented. At least for now
the result does not match the "mode" of cdrecord -toc.
*/

4
libburn/trunk/libburn/sg-dummy.c
View File

@ -85,7 +85,7 @@ int sg_initialize(char msg[1024], int flag)
/** Performs global finalization of the SCSI transport adapter and eventually
needed operating system facilities. Releases globally aquired resources.
needed operating system facilities. Releases globally acquired resources.
@param flag unused yet, submit 0
@return 1 = success, <=0 = failure
*/
@ -223,7 +223,7 @@ int sg_is_enumerable_adr(char *adr)
/* Return 1 if the given path leads to a regular file or a device that can be
seeked, read, and possibly written with 2 kB granularity.
fseeked, read, and possibly written with 2 kB granularity.
*/
int burn_os_is_2k_seekrw(char *path, int flag)
{

4
libburn/trunk/libburn/sg-freebsd.c
View File

@ -128,7 +128,7 @@ int sg_initialize(char msg[1024], int flag)
/* ts A91227 */
/** Performs global finalization of the SCSI transport adapter and eventually
needed operating system facilities. Releases globally aquired resources.
needed operating system facilities. Releases globally acquired resources.
@param flag unused yet, submit 0
@return 1 = success, <=0 = failure
*/
@ -995,7 +995,7 @@ ex:;
/* ts B00115 */
/* Return 1 if the given path leads to a regular file or a device that can be
seeked, read and eventually written with 2 kB granularity.
fseeked, read and eventually written with 2 kB granularity.
*/
int burn_os_is_2k_seekrw(char *path, int flag)
{

10
libburn/trunk/libburn/sg-libcdio.c
View File

@ -1,7 +1,7 @@
/* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */
/*
Copyright (c) 2009 - 2014 Thomas Schmitt <scdbackup@gmx.net>
Copyright (c) 2009 - 2016 Thomas Schmitt <scdbackup@gmx.net>
Provided under GPL version 2 or later.
*/
@ -45,7 +45,7 @@ sg_initialize() performs global initialization of the SCSI transport
software components.
sg_shutdown() performs global finalizations and releases golbally
aquired resources.
acquired resources.
sg_give_next_adr() iterates over the set of potentially useful drive
address strings.
@ -54,7 +54,7 @@ scsi_enumerate_drives() brings all available, not-whitelist-banned, and
accessible drives into libburn's list of drives.
sg_dispose_drive() finalizes adapter specifics of struct burn_drive
on destruction. Releases resources which were aquired
on destruction. Releases resources which were acquired
underneath scsi_enumerate_drives().
sg_drive_is_open() tells wether libburn has the given drive in use.
@ -395,7 +395,7 @@ int sg_initialize(char msg[1024], int flag)
/** Performs global finalization of the SCSI transport adapter and eventually
needed operating system facilities. Releases globally aquired resources.
needed operating system facilities. Releases globally acquired resources.
@param flag unused yet, submit 0
@return 1 = success, <=0 = failure
*/
@ -840,7 +840,7 @@ static int freebsd_is_2k_seekrw(char *path, int flag)
/* Return 1 if the given path leads to a regular file or a device that can be
seeked, read, and possibly written with 2 kB granularity.
fseeked, read, and possibly written with 2 kB granularity.
*/
int burn_os_is_2k_seekrw(char *path, int flag)
{

10
libburn/trunk/libburn/sg-linux.c
View File

@ -51,7 +51,7 @@ sg_initialize() performs global initialization of the SCSI transport
software components.
sg_shutdown() performs global finalizations and releases golbally
aquired resources.
acquired resources.
sg_give_next_adr() iterates over the set of potentially useful drive
address strings.
@ -60,7 +60,7 @@ scsi_enumerate_drives() brings all available, not-whitelist-banned, and
accessible drives into libburn's list of drives.
sg_dispose_drive() finalizes adapter specifics of struct burn_drive
on destruction. Releases resources which were aquired
on destruction. Releases resources which were acquired
underneath scsi_enumerate_drives().
sg_drive_is_open() tells wether libburn has the given drive in use.
@ -201,7 +201,7 @@ static int linux_sg_auto_family = 1;
/* Set this to 1 in order to accept any TYPE_* (see scsi/scsi.h) */
/* But try with 0 first. There is hope via CDROM_DRIVE_STATUS. */
/* !!! DO NOT SET TO 1 UNLESS YOU PROTECTED ALL INDISPENSIBLE DEVICES
/* !!! DO NOT SET TO 1 UNLESS YOU PROTECTED ALL INDISPENSABLE DEVICES
chmod -rw !!! */
static int linux_sg_accept_any_type = 0;
@ -1526,7 +1526,7 @@ int sg_initialize(char msg[1024], int flag)
/** Performs global finalization of the SCSI transport adapter and eventually
needed operating system facilities. Releases globally aquired resources.
needed operating system facilities. Releases globally acquired resources.
@param flag unused yet, submit 0
@return 1 = success, <=0 = failure
*/
@ -2355,7 +2355,7 @@ ex:;
/* ts B00115 */
/* Return 1 if the given path leads to a regular file or a device that can be
seeked, read, and possibly written with 2 kB granularity.
fseeked, read, and possibly written with 2 kB granularity.
*/
int burn_os_is_2k_seekrw(char *path, int flag)
{

8
libburn/trunk/libburn/sg-netbsd.c
View File

@ -52,7 +52,7 @@ sg_initialize() performs global initialization of the SCSI transport
software components.
sg_shutdown() performs global finalizations and releases golbally
aquired resources.
acquired resources.
sg_give_next_adr() iterates over the set of potentially useful drive
address strings.
@ -61,7 +61,7 @@ scsi_enumerate_drives() brings all available, not-whitelist-banned, and
accessible drives into libburn's list of drives.
sg_dispose_drive() finalizes adapter specifics of struct burn_drive
on destruction. Releases resources which were aquired
on destruction. Releases resources which were acquired
underneath scsi_enumerate_drives().
sg_drive_is_open() tells wether libburn has the given drive in use.
@ -337,7 +337,7 @@ int sg_initialize(char msg[1024], int flag)
/** Performs global finalization of the SCSI transport adapter and eventually
needed operating system facilities. Releases globally aquired resources.
needed operating system facilities. Releases globally acquired resources.
@param flag unused yet, submit 0
@return 1 = success, <=0 = failure
*/
@ -741,7 +741,7 @@ int sg_is_enumerable_adr(char* adr)
/* Return 1 if the given path leads to a regular file or a device that can be
seeked, read, and possibly written with 2 kB granularity.
fseeked, read, and possibly written with 2 kB granularity.
*/
int burn_os_is_2k_seekrw(char *path, int flag)
{

10
libburn/trunk/libburn/sg-solaris.c
View File

@ -1,7 +1,7 @@
/* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */
/*
Copyright (c) 2010 - 2014 Thomas Schmitt <scdbackup@gmx.net>
Copyright (c) 2010 - 2016 Thomas Schmitt <scdbackup@gmx.net>
Provided under GPL version 2 or later.
*/
@ -45,7 +45,7 @@ sg_initialize() performs global initialization of the SCSI transport
software components.
sg_shutdown() performs global finalizations and releases golbally
aquired resources.
acquired resources.
sg_give_next_adr() iterates over the set of potentially useful drive
address strings.
@ -54,7 +54,7 @@ scsi_enumerate_drives() brings all available, not-whitelist-banned, and
accessible drives into libburn's list of drives.
sg_dispose_drive() finalizes adapter specifics of struct burn_drive
on destruction. Releases resources which were aquired
on destruction. Releases resources which were acquired
underneath scsi_enumerate_drives().
sg_drive_is_open() tells wether libburn has the given drive in use.
@ -497,7 +497,7 @@ int sg_initialize(char msg[1024], int flag)
/** Performs global finalization of the SCSI transport adapter and eventually
needed operating system facilities. Releases globally aquired resources.
needed operating system facilities. Releases globally acquired resources.
@param flag unused yet, submit 0
@return 1 = success, <=0 = failure
*/
@ -881,7 +881,7 @@ int sg_is_enumerable_adr(char* adr)
/* Return 1 if the given path leads to a regular file or a device that can be
seeked, read, and possibly written with 2 kB granularity.
fseeked, read, and possibly written with 2 kB granularity.
*/
int burn_os_is_2k_seekrw(char *path, int flag)
{

2
libburn/trunk/libburn/sg.h
View File

@ -62,7 +62,7 @@ int sg_initialize(char msg[1024], int flag);
/* ts A91227 */
/** Performs global finalization of the SCSI transport adapter and eventually
needed operating system facilities. Releases globally aquired resources.
needed operating system facilities. Releases globally acquired resources.
@param flag unused yet, submit 0
@return 1 = success, <=0 = failure
*/

10
libburn/trunk/libburn/spc.c
View File

@ -1,7 +1,7 @@
/* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */
/* Copyright (c) 2004 - 2006 Derek Foreman, Ben Jansens
Copyright (c) 2006 - 2014 Thomas Schmitt <scdbackup@gmx.net>
Copyright (c) 2006 - 2016 Thomas Schmitt <scdbackup@gmx.net>
Provided under GPL version 2 or later.
*/
@ -1417,13 +1417,13 @@ enum response scsi_error_msg(struct burn_drive *d, unsigned char *sense,
case 0x29:
if (*ascq == 0)
sprintf(msg,
"Power on, reset, or bus device reset occured");
"Power on, reset, or bus device reset occurred");
else if (*ascq == 1)
sprintf(msg, "Power on occured");
sprintf(msg, "Power on occurred");
else if (*ascq == 2)
sprintf(msg, "Bus reset occured");
sprintf(msg, "Bus reset occurred");
else if (*ascq == 3)
sprintf(msg, "Bus device reset function occured");
sprintf(msg, "Bus device reset function occurred");
else if (*ascq == 4)
sprintf(msg, "Device internal reset");
else

4
libburn/trunk/libburn/transport.h
View File

@ -324,7 +324,7 @@ struct burn_drive
int silent_on_scsi_error;
/* ts B21023 */
/* bit0= 5 64 00 occured with READ10 in mmc_read_10()
/* bit0= 5 64 00 occurred with READ10 in mmc_read_10()
*/
int had_particular_error;
@ -375,7 +375,7 @@ struct burn_drive
*/
int mr_capacity_trusted;
/* ts B10314 : Next Writeable Adress for drive_role == 5 */
/* ts B10314 : Next Writeable Address for drive_role == 5 */
int role_5_nwa;
int toc_temp;

4
libburn/trunk/libburn/write.c
View File

@ -789,7 +789,7 @@ XXX this is untested :)
rem += burn_track_get_shortage(tar[i]);
/* ts A61101 : I doubt that linking would yield a
desireable effect. With TAO it is
desirable effect. With TAO it is
counterproductive in any way.
*/
if (o->write_type == BURN_WRITE_TAO)
@ -2106,7 +2106,7 @@ int burn_dvd_write_session(struct burn_write_opts *o,
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020171,
LIBDAX_MSGS_SEV_NOTE, LIBDAX_MSGS_PRIO_HIGH,
"Closing BD-R with accidently open session",
"Closing BD-R with accidentally open session",
0, 0);
d->close_track_session(d, 3, 0); /* CLOSE SESSION, 110b */
d->state_of_last_session = 3; /* mark as complete session */

18
libburn/trunk/test/libburner.c
View File

@ -1,6 +1,6 @@
/* test/libburner.c , API illustration of burning data or audio tracks to CD */
/* Copyright (C) 2005 - 2015 Thomas Schmitt <scdbackup@gmx.net> */
/* Copyright (C) 2005 - 2016 Thomas Schmitt <scdbackup@gmx.net> */
/* Provided under GPL, see also "License and copyright aspects" at file end */
@ -24,17 +24,17 @@
and provide some signal and abort handling, e.g. by the builtin handler, by
burn_set_signal_handling("libburner : ", NULL, 0x0)
as it is done in main() at the end of this file.
Then you aquire a drive in an appropriate way conforming to the API. The twoi
Then you acquire a drive in an appropriate way conforming to the API. The two
main approaches are shown here in application functions:
libburner_aquire_by_adr() demonstrates usage as of cdrecord traditions
libburner_aquire_by_driveno() demonstrates a scan-and-choose approach
With that aquired drive you can blank a CD-RW or DVD-RW as shown in
With that acquired drive you can blank a CD-RW or DVD-RW as shown in
libburner_blank_disc()
or you can format a DVD-RW to profile "Restricted Overwrite" (needed once)
or an unused BD to default size with spare blocks
libburner_format()
With the aquired drive you can burn to CD, DVD, BD. See
With the acquired drive you can burn to CD, DVD, BD. See
libburner_payload()
These three functions switch temporarily to a non-fatal signal handler
@ -98,7 +98,7 @@ static unsigned int drive_count;
finally released */
static int drive_is_grabbed = 0;
/** A number and a text describing the type of media in aquired drive */
/** A number and a text describing the type of media in acquired drive */
static int current_profile= -1;
static char current_profile_name[80]= {""};
@ -111,7 +111,7 @@ int libburner_aquire_by_driveno(int *drive_no);
/* ------------------------------- API gestures ---------------------------- */
/** You need to aquire a drive before burning. The API offers this as one
/** You need to acquire a drive before burning. The API offers this as one
compact call and alternatively as application controllable gestures of
whitelisting, scanning for drives and finally grabbing one of them.
@ -239,14 +239,14 @@ int libburner_aquire_by_driveno(int *driveno)
and to restart when the choice has been made. The list of selectable
drives should also hold persistent drive addresses as obtained
above by burn_drive_get_adr(). By such an address one may use
burn_drive_scan_and_grab() to finally aquire exactly one drive.
burn_drive_scan_and_grab() to finally acquire exactly one drive.
A not yet tested shortcut should be to call burn_drive_info_free()
and to call either burn_drive_scan() or burn_drive_scan_and_grab()
before accessing any drives again.
In both cases you have to be aware that the desired drive might get
aquired in the meantime by another user or libburn process.
acquired in the meantime by another user or libburn process.
*/
/* We already made our choice via command line. (default is 0)
@ -784,7 +784,7 @@ int main(int argc, char **argv)
/** Note: driveno might change its value in this call */
ret = libburner_aquire_drive(drive_adr, &driveno);
if (ret<=0) {
fprintf(stderr,"\nFATAL: Failed to aquire drive.\n");
fprintf(stderr,"\nFATAL: Failed to acquire drive.\n");
{ ret = 34; goto finish_libburn; }
}
if (ret == 2)

10
libburn/trunk/test/telltoc.c
View File

@ -1,6 +1,6 @@
/* test/telltoc.c , API illustration of obtaining media status info */
/* Copyright (C) 2006 - 2015 Thomas Schmitt <scdbackup@gmx.net>
/* Copyright (C) 2006 - 2016 Thomas Schmitt <scdbackup@gmx.net>
Provided under GPL */
/** Overview
@ -18,12 +18,12 @@
Before you can do anything, you have to initialize libburn by
burn_initialize()
as it is done in main() at the end of this file. Then you aquire a
as it is done in main() at the end of this file. Then you acquire a
drive in an appropriate way conforming to the API. The two main
approaches are shown here in application functions:
telltoc_aquire_by_adr() demonstrates usage as of cdrecord traditions
telltoc_aquire_by_driveno() demonstrates a scan-and-choose approach
With that aquired drive you can call
With that acquired drive you can call
telltoc_media() prints some information about the media in a drive
telltoc_toc() prints a table of content (if there is content)
telltoc_msinfo() prints parameters for mkisofs option -C
@ -86,7 +86,7 @@ static int cd_is_audio = 0; /* 0 = undecided , -1 = no , 1 = yes */
/* ------------------------------- API gestures ---------------------------- */
/** You need to aquire a drive before burning. The API offers this as one
/** You need to acquire a drive before burning. The API offers this as one
compact call and alternatively as application controllable gestures of
whitelisting, scanning for drives and finally grabbing one of them.
@ -128,7 +128,7 @@ int telltoc_aquire_by_adr(char *drive_adr)
return 0;
}
fprintf(stderr,"Aquiring drive '%s' ...\n", libburn_drive_adr);
fprintf(stderr,"Acquiring drive '%s' ...\n", libburn_drive_adr);
ret = burn_drive_scan_and_grab(&drive_list, libburn_drive_adr, 1);
if (ret <= 0) {