New operating system adapter "dummy" for stdio on POSIX-like systems

libburn/trunk/cdrskin/cdrskin_timestamp.h

@@ -1 +1 @@
-#define Cdrskin_timestamP "2009.02.27.211707"
+#define Cdrskin_timestamP "2009.03.02.170126"

libburn/trunk/libburn/libdax_msgs.h

@@ -542,8 +542,13 @@ Range "scdbackup"          :  0x00020000 to 0x0002ffff
  0x00020167 (SORRY,HIGH)   = Drive does not support non-default formatting
  0x00020168 (FAILURE,HIGH) = Media not properly formatted. Cannot write.
  0x00020169 (WARNING,HIGH) = Last session on media is still open
+ 0x0002016a (FAILURE,HIGH) = No MMC transport adapter is present
+ 0x0002016b (WARNING,HIGH) = No MMC transport adapter is present
+ 0x0002016c (DEBUG,HIGH)   = No MMC transport adapter is present
+
  0x00020170 (NOTE,HIGH)    = Closing open session before writing new one
  0x00020171 (NOTE,HIGH)    = Closing BD-R with accidently open session
+ 
 
  libdax_audioxtr:
  0x00020200 (SORRY,HIGH)   = Cannot open audio source file

libburn/trunk/libburn/os-dummy.h

@@ -0,0 +1,63 @@
+
+/* os-dummy.h
+   Operating system specific libburn definitions and declarations. Included
+   by os.h in case of compilation for
+           Unknown POSIX like systems
+           with the dummy MMC transport adapter sg-dummy.c
+
+   Copyright (C) 2009 Thomas Schmitt <scdbackup@gmx.net>, provided under GPL
+*/
+
+
+/** List of all signals which shall be caught by signal handlers and trigger
+    a graceful abort of libburn. (See man 7 signal.)
+*/
+/* Once as system defined macros */
+#define BURN_OS_SIGNAL_MACRO_LIST \
+ SIGHUP, SIGINT, SIGQUIT, SIGILL, SIGABRT, \
+ SIGFPE, SIGSEGV, SIGPIPE, SIGALRM, SIGTERM, \
+ SIGUSR1, SIGUSR2, SIGXCPU, SIGTSTP, SIGTTIN, \
+ SIGTTOU
+
+/* Once as text 1:1 list of strings for messages and interpreters */
+#define BURN_OS_SIGNAL_NAME_LIST \
+ "SIGHUP", "SIGINT", "SIGQUIT", "SIGILL", "SIGABRT", \
+ "SIGFPE", "SIGSEGV", "SIGPIPE", "SIGALRM", "SIGTERM", \
+ "SIGUSR1", "SIGUSR2", "SIGXCPU", "SIGTSTP", "SIGTTIN", \
+ "SIGTTOU"
+
+/* The number of above list items */
+#define BURN_OS_SIGNAL_COUNT 16
+
+/** To list all signals which shall surely not be caught */
+#define BURN_OS_NON_SIGNAL_MACRO_LIST \
+SIGKILL, SIGCHLD, SIGSTOP
+
+/* The number of above list items */
+#define BURN_OS_NON_SIGNAL_COUNT 3
+
+
+/* The maximum size for a (SCSI) i/o transaction */
+/* Important : MUST be at least 32768 ! */
+#define BURN_OS_TRANSPORT_BUFFER_SIZE 65536
+
+
+/* To hold the position of the most recently delivered address from
+   device enumeration.
+*/
+struct burn_drive_enumerator_struct {
+	int pos;
+	int info_count;
+	char **info_list;
+};
+
+#define BURN_OS_DEFINE_DRIVE_ENUMERATOR_T \
+typedef struct burn_drive_enumerator_struct burn_drive_enumerator_t;
+
+
+/* The list of operating system dependent elements in struct burn_drive.
+   Usually they are initialized in  sg-*.c:enumerate_common().
+*/
+#define BURN_OS_TRANSPORT_DRIVE_ELEMENTS \
+	int just_a_dummy;
+

libburn/trunk/libburn/os.h

@@ -3,7 +3,7 @@
    Operating system specific libburn definitions and declarations.
    The macros defined here are used by libburn modules in order to
    avoid own system dependent case distinctions.
-   Copyright (C) 2006 Thomas Schmitt <scdbackup@gmx.net>, provided under GPL
+   Copyright (C) 2009 Thomas Schmitt <scdbackup@gmx.net>, provided under GPL
 */
 
 #ifndef BURN_OS_H_INCLUDED
@@ -20,14 +20,23 @@
 #include "os-freebsd.h"
 
 
-#else  /* operating system case distinction */
+#else
+#ifdef __linux
 
 
 /* --------- Linux kernels 2.4 and 2.6 with Linux SCSI Generic (sg) -------- */
 #include "os-linux.h"
 
 
-#endif /* End of operating system case distinction */
+#else
+
+
+/* --------- Any other system. With dummy MMC transport sg-dummy.c --------- */
+#include "os-dummy.h"
+
+
+#endif /* ! __linux */
+#endif /* ! __FreeBSD__ */
 
 
 #endif /* ! BURN_OS_H_INCLUDED */

libburn/trunk/libburn/sg-dummy.c

@@ -0,0 +1,227 @@
+/* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */
+
+/*
+
+This is the main operating system dependent SCSI part of libburn. It implements
+the transport level aspects of SCSI control and command i/o.
+
+Present implementation: default dummy which enables libburn only to work
+                        with stdio: pseudo drive addresses.
+                        For real implementations see sg-linux.c or sg-freebsd.c
+
+*/
+
+
+#include <unistd.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+#include <string.h>
+
+#include "transport.h"
+#include "drive.h"
+#include "sg.h"
+#include "spc.h"
+#include "mmc.h"
+#include "sbc.h"
+#include "debug.h"
+#include "toc.h"
+#include "util.h"
+
+#include "libdax_msgs.h"
+extern struct libdax_msgs *libdax_messenger;
+
+
+
+/** Returns the next index number and the next enumerated drive address.
+    The enumeration has to cover all available and accessible drives. It is
+    allowed to return addresses of drives which are not available but under
+    some (even exotic) circumstances could be available. It is on the other
+    hand allowed, only to hand out addresses which can really be used right
+    in the moment of this call. (This implementation chooses the former.)
+    @param idx An opaque handle. Make no own theories about it.
+    @param adr Takes the reply
+    @param adr_size Gives maximum size of reply including final 0
+    @param initialize  1 = start new,
+                       0 = continue, use no other values for now
+                      -1 = finish
+    @return 1 = reply is a valid address , 0 = no further address available
+           -1 = severe error (e.g. adr_size too small)
+*/
+int sg_give_next_adr(burn_drive_enumerator_t *idx,
+		     char adr[], int adr_size, int initialize)
+{
+	return 0;
+}
+
+
+/** Brings all available, not-whitelist-banned, and accessible drives into
+    libburn's list of drives.
+*/
+/* ts A61115: replacing call to sg-implementation internals from drive.c */
+int scsi_enumerate_drives(void)
+{
+	libdax_msgs_submit(libdax_messenger, -1, 0x0002016b,
+		LIBDAX_MSGS_SEV_WARNING, LIBDAX_MSGS_PRIO_HIGH,
+		"No MMC transport adapter is present. Running on sg-dummy.c.",
+		0, 0);
+	return 1;
+}
+
+
+/** Tells wether libburn has the given drive in use or exclusively reserved.
+    If it is "open" then libburn will eventually call sg_release() on it when
+    it is time to give up usage resp. reservation.
+*/
+/** Published as burn_drive.drive_is_open() */
+int sg_drive_is_open(struct burn_drive * d)
+{
+	return 0;
+}
+
+
+/** Opens the drive for SCSI commands and - if burn activities are prone
+    to external interference on your system - obtains an exclusive access lock
+    on the drive. (Note: this is not physical tray locking.)
+    A drive that has been opened with sg_grab() will eventually be handed
+    over to sg_release() for closing and unreserving.
+*/
+int sg_grab(struct burn_drive *d)
+{
+	libdax_msgs_submit(libdax_messenger, d->global_index, 0x0002016a,
+		LIBDAX_MSGS_SEV_FAILURE, LIBDAX_MSGS_PRIO_HIGH,
+		"No MMC transport adapter is present. Running on sg-dummy.c.",
+		0, 0);
+	return 0;
+}
+
+
+/** Gives up the drive for SCSI commands and releases eventual access locks.
+    (Note: this is not physical tray locking.)
+*/
+int sg_release(struct burn_drive *d)
+{
+	return 0;
+}
+
+
+/** Sends a SCSI command to the drive, receives reply and evaluates wether
+    the command succeeded or shall be retried or finally failed.
+    Returned SCSI errors shall not lead to a return value indicating failure.
+    The callers get notified by c->error. An SCSI failure which leads not to
+    a retry shall be notified via scsi_notify_error().
+    The Libburn_log_sg_commandS facility might be of help when problems with
+    a drive have to be examined. It shall stay disabled for normal use.
+    @return: 1 success , <=0 failure
+*/
+int sg_issue_command(struct burn_drive *d, struct command *c)
+{
+	libdax_msgs_submit(libdax_messenger, d->global_index, 0x0002016a,
+		LIBDAX_MSGS_SEV_FAILURE, LIBDAX_MSGS_PRIO_HIGH,
+		"No MMC transport adapter is present. Running on sg-dummy.c.",
+		0, 0);
+	return -1;
+}
+
+
+/** Tries to obtain SCSI address parameters.
+    @return  1 is success , 0 is failure
+*/
+int sg_obtain_scsi_adr(char *path, int *bus_no, int *host_no, int *channel_no,
+                       int *target_no, int *lun_no)
+{
+        libdax_msgs_submit(libdax_messenger, -1, 0x0002016c,
+                LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_HIGH,
+                "No MMC transport adapter is present. Running on sg-dummy.c.",
+                0, 0);
+	return 0;
+}
+
+
+/** Tells wether a text is a persistent address as listed by the enumeration
+    functions.
+*/
+int sg_is_enumerable_adr(char *adr)
+{
+	return(0);
+}
+
+
+/** Estimate the potential payload capacity of a file address.
+    @param path  The address of the file to be examined. If it does not
+                 exist yet, then the directory will be inquired.
+    @param bytes The pointed value gets modified, but only if an estimation is
+                 possible.
+    @return      -2 = cannot perform necessary operations on file object
+                 -1 = neither path nor dirname of path exist
+                  0 = could not estimate size capacity of file object
+                  1 = estimation has been made, bytes was set
+*/
+int burn_os_stdio_capacity(char *path, off_t *bytes)
+{
+	struct stat stbuf;
+
+#ifdef Libburn_os_has_statvfS
+	struct statvfs vfsbuf;
+	int open_mode = O_RDONLY, fd, ret;
+#endif
+
+	char testpath[4096], *cpt;
+	long blocks;
+	off_t add_size = 0;
+
+	testpath[0] = 0;
+	blocks = *bytes / 512;
+	if (stat(path, &stbuf) == -1) {
+		strcpy(testpath, path);
+		cpt = strrchr(testpath, '/');
+		if(cpt == NULL)
+			strcpy(testpath, ".");
+		else if(cpt == testpath)
+			testpath[1] = 0;
+		else
+			*cpt = 0;
+		if (stat(testpath, &stbuf) == -1)
+			return -1;
+
+#ifdef Libburn_if_this_was_linuX
+
+	} else if(S_ISBLK(stbuf.st_mode)) {
+		fd = open(path, open_mode);
+		if (fd == -1)
+			return -2;
+		ret = ioctl(fd, BLKGETSIZE, &blocks);
+		close(fd);
+		if (ret == -1)
+			return -2;
+		*bytes = ((off_t) blocks) * (off_t) 512;
+
+#endif /* Libburn_if_this_was_linuX */
+
+	} else if(S_ISREG(stbuf.st_mode)) {
+		add_size = stbuf.st_blocks * (off_t) 512;
+		strcpy(testpath, path);
+	} else
+		return 0;
+
+	if (testpath[0]) {	
+
+#ifdef Libburn_os_has_statvfS
+
+		if (statvfs(testpath, &vfsbuf) == -1)
+			return -2;
+		*bytes = add_size + ((off_t) vfsbuf.f_bsize) *
+						(off_t) vfsbuf.f_bavail;
+
+#else /* Libburn_os_has_statvfS */
+
+		return 0;
+
+#endif /* ! Libburn_os_has_stavtfS */
+
+	}
+	return 1;
+}
+

libburn/trunk/libburn/sg.c

@@ -1,7 +1,7 @@
 
 /* sg.c
    Switcher for operating system dependent transport level modules of libburn.
-   Copyright (C) 2006 Thomas Schmitt <scdbackup@gmx.net>, provided under GPL
+   Copyright (C) 2009 Thomas Schmitt <scdbackup@gmx.net>, provided under GPL
 */
 
 
@@ -10,8 +10,14 @@
 #include "sg-freebsd.c"
 
 #else
+#ifdef __linux
 
 #include "sg-linux.c"
 
-#endif
+#else
+
+#include "sg-dummy.c"
+
+#endif /* ! __linux */
+#endif /* ! __FreeBSD__ */