Backported manpage to libburn-0.2.6.1 -> libburn-0.2.6.2

libburn/tags/ZeroTwoSixTwo/Makefile.am

@@ -165,6 +165,9 @@ indent: $(indent_files)
 nodist_pkgconfig_DATA = \
 	libburn-1.pc
 
+# http://www.nada.kth.se/cgi-bin/info?(automake.info)Man%20pages
+man_MANS = cdrskin/cdrskin.1 
+
 EXTRA_DIST = \
 	libburn-1.pc.in \
 	version.h.in \
@@ -186,5 +189,6 @@ EXTRA_DIST = \
 	libburn/os-linux.h \
 	libburn/sg-freebsd.c \
 	libburn/sg-linux.c \
-	COPYING
+	COPYING \
+	$(man_MANS)
 

libburn/tags/ZeroTwoSixTwo/cdrskin/README

@@ -59,9 +59,9 @@ systems, including 64 bit systems. (Further reports are welcome.)
 
                    Compilation, First Glimpse, Installation
 
-Obtain cdrskin-0.2.6.pl01.tar.gz, take it to a directory of your choice and do:
+Obtain cdrskin-0.2.6.pl02.tar.gz, take it to a directory of your choice and do:
 
-    tar xzf cdrskin-0.2.6.pl01.tar.gz
+    tar xzf cdrskin-0.2.6.pl02.tar.gz
     cd cdrskin-0.2.6
 
 Or obtain a libburn.pykix.org SVN snapshot,
@@ -90,6 +90,7 @@ Version identification and help texts available afterwards:
     cdrskin/cdrskin -version
     cdrskin/cdrskin --help
     cdrskin/cdrskin -help
+    man cdrskin/cdrskin.1
 
 Install (eventually as superuser) cdrskin to a directory where it can be found:
 If cdrskin was already installed by a previous version, or by "make install"
@@ -108,6 +109,10 @@ It will not collide with an installed version of libburn either.
 But libpthread must be installed on the system and glibc has to match. (See
 below for a way to create a statically linked binary.)
 
+To install the man page, you may do: echo $MANPATH and choose one of the
+listed directories to copy the man-page under its ./man1 directory. Like:
+    cp cdrskin/cdrskin.1 /usr/share/man/man1/cdrskin.1
+
 
                                     Usage
 

libburn/tags/ZeroTwoSixTwo/cdrskin/cdrskin.1

@@ -0,0 +1,600 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH CDRSKIN 1 "December 13, 2006"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+cdrskin \- burns preformatted data to CD-R or CD-RW via libburn.
+.SH SYNOPSIS
+.B cdrskin
+.RI [ options | track_source_addresses ]
+.br
+.SH DESCRIPTION
+.PP
+.\" TeX users may be more comfortable with the \fB<whatever>\fP and
+.\" \fI<whatever>\fP escape sequences to invode bold face and italics, 
+.\" respectively.
+.PP 
+\fBcdrskin\fP is a program that provides some of cdrecord's options in a compatible way. 
+You don't need to be root to use it.
+.PP
+.B Overview of features:
+.br
+Blanking of CD-RW.
+.br
+Burning of data or audio tracks to CD.
+.br
+Either in versatile Track at Once mode (TAO)
+.br
+or in Session at Once mode for seamless tracks.
+.br
+Multi session (follow-up sessions in TAO only).
+.br
+Bus scan, burnfree, speed options, retrieving media info, padding, fifo.
+.br
+See section EXAMPLES at the end of this text.
+.PP
+.B Known deficiencies:
+.br
+No DVD support yet.
+.PP
+.B Track recording model:
+.br
+The input-output entities which get processed are called tracks.
+A track stores a stream of bytes.
+.br
+Each track is initiated by one track source address argument, which may either
+be "-" for standard input or the address of a readable file. If no write mode
+is given explicitely then one will be chosen which matches the peculiarities
+of track source and the state of the output media.
+.PP
+There can be more than one track burned by a single run of cdrskin.
+CDs can be kept appendable so that further tracks can
+be written to them in subsequent runs of cdrskin (see option -multi).
+Info about the addresses of burned tracks is kept in a table of
+content (TOC) on media and can be retrieved via cdrskin option -toc.
+These informations are also used by the operating systems' CD-ROM read drivers.
+.PP
+In general there are two types of tracks: data and audio. They differ in
+sector size, throughput and readability via the systems' CD-ROM drivers
+resp. by music CD players.
+.br
+If not explicitely option -audio is given, then any track is burned as data
+unless the track source is a file with suffix ".wav" or ".au" and has a
+header part which identifies it as MS-WAVE resp. SUN Audio with suitable
+parameters. Such files are burned as audio tracks by default.
+.PP
+While audio tracks just contain a given time span of acoustic vibrations,
+data tracks may have an arbitray meaning. Nevertheless, ISO-9660 filesystems
+are established as a format which can represent a tree of directories and
+data files on all major operating systems. Such filesystem images can be
+produced by programs mkisofs or genisoimage. They can also be extended by
+follow-up tracks if prepared properly. See the man pages of said programs.
+cdrskin is able to fulfill the needs about their option -C.
+.br
+Another type of data track content are archive formats which originally
+have been developed for magnetic tapes. Only formats which mark a detectable
+end-of-archive in their data are suitable with CD, though. Well tested are
+the archivers afio and star. Not suitable seems GNU tar.
+.PP
+.B Recordable CD Media:
+.br
+CD-R can be initially written only once and eventually extended until they
+get closed (or are spoiled because they are overly full). After that they are
+read-only.
+.br
+CD-RW media can be blanked to make them re-usable for another
+round of overwriting. Blanking damages the previous content but does not
+make it completely unreadable. It is no effective privacy precaution.
+Multiple cycles of blanking and overwriting with random numbers might be.
+.br
+.SH OPTIONS
+.TP
+.BI \-\-help
+Show non-cdrecord compatible options.
+.TP
+.BI \-help
+Show cdrecord compatible options.
+.TP
+.BI \-version
+Print cdrskin id line, compatibility lure line, libburn version, cdrskin
+version, version timestamp, build timestamp (if available), and then exit.
+.PP
+Alphabetical list of options which are intended to be compatible with
+original cdrecord by Joerg Schilling:
+.TP
+.BI \-atip
+Retrieve some info about media state. With CD-RW print "Is erasable".
+.TP 
+.BI \-audio
+Announces that the subsequent tracks are to be burned as audio.
+The source is supposed to be uncompressed headerless PCM, 44100 Hz, 16 bit,
+stereo. For little-endian byte order (which is usual on PCs) use option
+-swab. Input files with suffix .wav are examined wether they have a header
+in MS-WAVE format confirming those parameters and eventually raw audio data
+get extracted automatically. Same is done for suffix .au and SUN Audio.
+.TP 
+.BI blank= type
+Blank a CD-RW disc. This is combinable with burning in the same run of cdrskin.
+The type given with blank= selects the particular behavior:
+.RS
+.TP
+help
+Print this list of blanking types.
+.TP
+all
+Blank the entire disk.
+.TP
+fast
+Minimally blank the entire disk.
+.RE
+.TP
+.BI \-checkdrive
+Retrieve some info about the addressed drive.
+Exits with non-zero value if the drive cannot be found and opened.
+.TP
+.BI \-dao
+Alias for option -sao. Write disk in Session at Once mode.
+.TP
+.BI \-data
+Subsequent tracks are data tracks. This option is default and only needed
+to mark the end of the range of an eventual option -audio.
+.TP
+.BI dev= target
+Sets the (pseudo-)SCSI address of the drive to use. Valid are at least the
+X,Y,Z addresses listed with option -scanbus, ATA:X,Y,Z addresses listed with
+options dev=ATA -scanbus, the device file addresses listed with
+option --devices , volatile libburn drive numbers (numbering starts at "0").
+Other device file addresses which lead to the same drive might work too.
+.br
+If no dev= is given, volatile address "dev=0" is assumed. That is the first
+drive found being available. Better avoid this on multi-drive systems.
+.br
+The special target "help" lists hints about available addressing formats.
+Be aware that option --old_pseudo_scsi_adr changes the meaning of 
+Bus,Target,Lun addresses.
+.TP
+.BI driveropts= opt
+Set "driveropts=burnfree" to enable the drive's eventual protection mechanism
+against temporary lack of source data (i.e. buffer underrun).
+It is not an error to do this with a drive that has no such capabilities.
+.TP
+.BI \-dummy
+Try to perform the drive operations without actually affecting the inserted
+media. There is no guarantee that this will work with a particular drive
+in a particular write mode. Blanking is prevented reliably, though.
+.TP
+.BI \-eject
+Eject the disk after work is done.
+.TP
+.BI \-force
+Assume that the user knows better in situations when cdrskin or libburn are
+insecure about drive or media state. This includes the attempt to blank
+media which are classified as unknown or unsuitable, and the attempt to use
+write modes which libburn believes they are not supported by the drive.
+.br
+Use this only when in urgent need.
+.TP
+.BI fs= size
+Set the fifo size to the given value. The value may have appended letters which
+multiply the preceding number:
+.br
+"k" or "K" = 1024 , "m" or "M" = 1024k , "g" or "G" = 1024m , "s" or "S" = 2048
+.br
+Set size to 0 in order to disable the fifo (default is "4m").
+.br
+The fifo buffers an eventual temporary surplus of track source data in order to
+provide the drive with a steady stream during times of temporary lack of track
+source supply.
+The larger the fifo, the longer periods of poor source supply can be
+compensated.
+But a large fifo needs substantial time to fill up if not curbed via
+option fifo_start_at=size.
+.TP
+.BI gracetime= seconds
+Set the grace time before starting to write. (Default is 0)
+.TP
+.BI \-msinfo
+Retrieve multi-session info for preparing a follow-up session by option -C
+of programs mkisofs or genisoimage. Print result to standard output.
+This option redirects to stderr all
+message output besides its own result string, which consists of two numbers.
+The result string shall be used as argument of option -C with said programs.
+It gives the start address of the most recent session and the predicted
+start address of the next session to be appended. The string is empty if
+the most recent session was not written with option -multi.
+.TP
+.BI \-multi
+This option keeps the CD appendable after the current session has been written.
+Without it the disk gets closed and may not be written any more  - unless it
+is a CD-RW and gets blanked which causes loss of its content.
+.br
+The following sessions can only be written in -tao mode.
+.br
+In order to have all filesystem content accessible, the eventual ISO-9660
+filesystem of a follow-up
+session needs to be prepared in a special way by the filesystem formatter
+program. mkisofs and genisoimage expect particular info about the situation
+which can be retrieved by cdrskin option -msinfo.
+.br
+To retrieve an archive file which was written as follow-up session,
+you may use option -toc to learn about the "lba" of the desired track number. 
+.TP
+.BI \-nopad
+Do not add trailing zeros to the data stream. Nevertheless, since there seems
+to be no use for audio tracks with incomplete last sector, this option applies
+only to data tracks. There it is default.
+.TP
+.BI \-pad
+Add 30 kB of trailing zeros to each data track. (This is not sufficient to
+avoid problems with various CD-ROM read drivers.)
+.TP
+.BI padsize= size
+Add the given amount of trailing zeros to the next data track. This option
+gets reset to padsize=0 after that next track is written. It may be set
+again before the next track argument. About size specifiers, see option fs=.
+.TP
+.BI \-raw96r
+Write disk in RAW/RAW96R mode. This mode allows to put more payload bytes
+into a CD sector but obviously at the cost of error correction. It can only
+be used for tracks of fixely predicted size. Some drives allow this mode but
+then behave strange or even go bad for the next few attempts to burn a CD.
+One should use it only if inavoidable.
+.TP
+.BI \-sao
+Write disk in Session At Once mode. This mode is able to put several audio
+tracks on CD without producing audible gaps between them. It can only 
+be used for tracks of fixely predicted size. This implies that track arguments
+which depict stdin or named pipes need to be preceeded by option tsize= or
+by option tao_to_sao_tsize=.
+.TP
+.BI \-scanbus
+Scan the system for drives. On Linux the drives at /dev/s* and at /dev/hd*
+are to be scanned by two separate runs. One without dev= for /dev/s* and
+one with dev=ATA for /dev/hd* devices. (Option --drives lists all available
+drives in a single run.)
+.br
+Drives which are busy or which offer no rw-permission to the user of cdrskin
+are not listed. Busy drives get reported in form of warning messages.
+.br
+The useful fields in a result line are:
+.br
+Bus,Target,Lun Number) 'Vendor' 'Mode' 'Revision'
+.TP
+.BI speed= number
+Set speed of drive. With data CD, 1x speed corresponds to a throughput of
+150 kB/s. It is not an error to set a speed higher than is suitable for drive
+and media. One should stay within a realistic speed range, though.
+.TP
+.BI \-swab
+Announce that the raw audio data source of subsequent tracks is byte swapped
+versus the expectations of cdrecord. This option is suitable for audio where
+the least significant byte of a 16 bit word is first (little-endian, Intel).
+Most raw audio data on PC systems are available in this byte order.
+Less guesswork is needed if track sources are in format MS-WAVE in a file with
+suffix ".wav".
+.TP
+.BI \-tao
+Write disk in Track At Once (TAO) mode. This mode can be used with track
+sources of unpredictable size, like standard input or named pipes. It is
+also the only mode that can be used for writing to appendable CD which
+already hold data.
+.TP
+.BI \-toc
+Print the table of content (TOC) which describes the tracks recorded on CD.
+The output contains all info from option -atip plus lines which begin with
+"track:  " followed by the track number, the word "lba:" and a number which
+gives the start address of the track. Addresses are counted in CD sectors which
+with data tracks hold 2048 bytes each.
+.RS
+.TP
+Example. Retrieve an afio archive from track number 2:
+.br
+tracknumber=2
+.br
+lba=$(cdrskin dev=/dev/cdrom -toc 2>&1 | \\
+.br
+grep '^track:  [ 0-9][0-9]' | \\
+.br
+tail +"$tracknumber" | head -1 | \\
+.br
+awk '{ print $4}' )
+.br
+dd if=/dev/cdrom bs=2048 skip="$lba" | \\
+.br
+afio -t - | less
+.RE
+.TP
+.BI tsize= size
+Announces the exact size of the next track source. This is necessary with any
+write mode other than -tao if the track source is not a regular disk file, but
+e.g. "-" (standard input) or a named pipe.
+About size specifiers, see option fs=.
+.br
+If the track source does not deliver the predicted amount of bytes, the
+remainder of the track is padded with zeros. This is not considered an error.
+If on the other hand the track source delivers more than the announced bytes
+then the track on CD gets truncated to the predicted size and cdrskin exits
+with non-zero value.
+.TP
+.BI \-v
+Increment verbose level by one. Startlevel is 0 with only few messages.
+Level 1 prints progress report with long running operations and also causes
+some extra lines to be put out with info retrieval options. 
+Level 2 additionally reports about option settings derived from arguments or
+startup files. Level 3 is for debugging and useful mainly in conjunction with
+somebody who had a look into the program sourcecode.
+.PP
+Alphabetical list of options which are genuine to cdrskin and intended for
+normal use:
+.TP
+.BI \--allow_setuid
+Disable the program abort triggered by an insecure discrepance between
+login user and
+effective user which indicates application of chmod u+s to the program binary.
+One should not do this chmod u+s , but it is an old cdrecord tradition.
+.TP
+.BI \--any_track
+Allow source_addresses to begin with "-" (plus further characters) or to
+contain a "=" character.
+By default such arguments are seen as misspelled options. It is nevertheless
+not possible to use one of the options of cdrecord-2.01.
+.TP
+.BI \--demand_a_drive
+Exit with a nonzero value if no drive can be found during a bus scan.
+.TP
+.BI \--devices
+List the device file addresses of all accessible drives. In order to get
+listed a drive has to offer rw-permission for the cdrskin user and it may
+not be busy.
+Busy drives are reported as "SORRY" messages on standard error.
+.br
+Each available drive gets listed by a line containing the following fields:
+.br
+Number dev='Devicefile' rw-Permissions : 'Vendor' 'Model'
+.br
+Number and Devicefile can both be used with option dev=, but number is
+volatile (numbering changes if drives become busy).
+Normal users might not see all drives unless the superuser enabled access
+by chmod o+rw
+after using cdrskin --devices to get an overview of the situation.
+That's why current rw-Permissions are listed.
+.TP
+.BI fifo_start_at= size
+Do not wait for full fifo but start burning as soon as the given number
+of bytes is read. This option may be helpful to bring the average throughput
+near to the maximum throughput of a drive. A large fs= and a small 
+fifo_start_at= combine a quick burn start and a large savings buffer to
+compensate for temporary lack of source data. At the beginning of burning,
+the software protection against buffer underun is as weak as the size of
+fifo_start_at= . So it is best if the drive offers hardware protection which
+has to be enabled by driveropts=burnfree.
+.TP
+.BI \--no_rc
+Only if used as first command line argument this option prevents reading and
+interpretation of eventual startup files. See section FILES below.
+.TP
+.BI \--single_track
+Accept only the last argument of the command line as track source address.
+.PP
+Alphabetical list of options which are only intended for very special
+situations and not for  normal use:
+.TP
+.BI \--abort_handler
+Establish default signal handling not to leave a drive in busy state
+but rather to shut it down and to wait until it has ended the final operations.
+This option is only needed for revoking eventual --ignore_signals or
+--no_abort_handler.
+.TP
+.BI dev_translation= <sep><from><sep><to>
+Set drive address alias. This was necessary before cdrskin-0.2.4 to manually
+translate cdrecord addresses into cdrskin addresses.
+.br
+<sep> is a single character which may not occur in the address string
+<from>. <from> is an address as expected to be given by the user via option
+dev=. <to> is the address to be used instead whenever <from> is given.
+More than one translation instruction can be given in one cdrskin run.
+.br
+E.g.: dev_translation=+ATA:1,0,0+/dev/sg1 dev_translation=+ATA:1,1,0+/dev/sg2
+.TP
+.BI \--drive_abort_on_busy
+Linux specific: Abort process if a busy drive is encountered.
+.TP
+.BI \--drive_blocking
+Linux specific: Try to wait for a busy drive to become free.
+This is not guaranteed to work with all drivers. Some need nonblocking i/o.
+.TP
+.BI \--drive_not_exclusive
+Linux specific: Do not ask the operating system to prevent opening busy drives.
+Wether this leads to senseful behavior depends on operating system and kernel.
+.TP
+.BI \--drive_scsi_exclusive
+Linux specific:
+Try to exclusively reserve device files /dev/srN, /dev/scdM, /dev/stK of drive.
+this would be helpful to protect against collisions with program growisofs.
+Regrettably on Linux kernel 2.4 with ide-scsi emulation this seems not to
+work. Wether it becomes helpful with new Linux systems has to be evaluated.
+.TP
+.BI \--fifo_disable
+Disable fifo despite any fs=.
+.TP
+.BI \--fifo_per_track
+Use a separate fifo for each track.
+.TP
+.BI grab_drive_and_wait= seconds
+Open the addressed drive, wait the given number of seconds, release the drive,
+and do normal work as indicated by the other options used. This option helps
+to explore the program behavior when faced with busy drives. Just start a
+second cdrskin with option --devices while grab_drive_and_wait= is still
+active.
+.TP
+.BI \--ignore_signals
+Try to ignore any signals rather than to abort the program. This is not a
+very good idea. You might end up waiting a very long time for cdrskin
+to finish.
+.TP
+.BI \--no_abort_handler
+On signals exit even if the drive is in busy state. This is not a very good
+idea. You might end up with a stuck drive that refuses to hand out the media.
+.TP
+.BI \--no_blank_appendable
+Refuse to blank appendable CD-RW. This is a feature that was once builtin with
+libburn. No information available for what use case it was needed.
+.TP
+.BI \--no_convert_fs_adr
+Do only literal translations of dev=. This prevents cdrskin from test-opening
+device files in order to find one that matches the given dev= specifier.
+.br
+Partly Linux specific:
+Such opening is needed for Bus,Target,Lun addresses unless option
+--old_pseudo_scsi_adr is given. It is also needed to resolve device file
+addresses which are not listed with cdrskin --devices but nevertheless point
+to a usable drive. (Like /dev/sr0 using the same SCSI address as /dev/sg0.)
+.TP
+.BI \--old_pseudo_scsi_adr
+Linux specific:
+Use and report literal Bus,Target,Lun addresses rather than real SCSI and
+pseudo ATA addresses. This method is outdated and was never compatible with
+original cdrecord.
+.TP
+.BI tao_to_sao_tsize= size
+Set an exact fixed size for the next track to be in effect only if the track
+source cannot deliver a size prediction and no tsize= was specified.
+This is the fallback from bad old times when cdrskin was unable to burn
+in mode -tao.
+.br
+.SH EXAMPLES
+.SS
+.B Get an overview of drives:
+.br
+cdrskin -scanbus
+.br
+cdrskin dev=ATA -scanbus
+.br
+cdrskin --devices
+.SS
+.B Get info about a particular drive or loaded media:
+.br
+cdrskin dev=0,1,0 -checkdrive
+.br
+cdrskin dev=ATA:1,0,0 -atip
+.br
+cdrskin dev=/dev/hdc -toc
+.SS
+.B Make used CD-RW writable again:
+.br
+cdrskin -v dev=/dev/sg1 blank=all -eject
+.br
+cdrskin -v dev=/dev/dvd blank=fast -eject
+.SS
+.B Write ISO-9660 filesystem image:
+.br
+cdrskin -v dev=/dev/hdc speed=12 fs=8m \\
+.br
+driveropts=burnfree -sao -eject \\
+.br
+padsize=300k my_image.iso
+.SS
+.B Write compressed afio archive on-the-fly:
+.br
+find . | afio -oZ - | \\
+.br
+cdrskin -v dev=0,1,0 fs=32m speed=8 driveropts=burnfree \\
+.br
+padsize=300k -tao -
+.SS
+.B Write several sessions to the same CD:
+.br
+cdrskin dev=/dev/hdc padsize=300k -multi 1.iso
+.br
+cdrskin dev=/dev/hdc padsize=300k -multi -tao 2.afio
+.br
+cdrskin dev=/dev/hdc padsize=300k -multi -tao 3.afio
+.br
+cdrskin dev=/dev/hdc padsize=300k -tao 4.afio
+.SS
+.B Get the multi-session info for option -C of program mkisofs:
+.br
+c_values=$(cdrskin dev=/dev/sr0 -msinfo 2>/dev/null)
+.br
+mkisofs ... -C "$c_values" ...
+.SS
+.B Write audio tracks:
+.br
+cdrskin -v dev=ATA:1,0,0 speed=48 \\
+.br
+driveropts=burnfree -sao \\
+.br
+track1.wav track2.au -audio -swab track3.raw
+.br
+.SH FILES
+If not --no_rc is given as the first argument then cdrskin attempts on
+startup to read the arguments from the following files:
+.PP
+.br
+.B /etc/default/cdrskin
+.br
+.B /etc/opt/cdrskin/rc
+.br
+.B $HOME/.cdrskinrc
+.br
+.PP
+The files are read in the sequence given above, but none of them is
+required for cdrskin to function properly. Each readable line is treated
+as one single argument. No extra blanks.
+A first character '#' marks a comment, empty lines are ignored.
+.SS
+.B Example content of a startup file:
+.br
+# This is the default device
+.br
+dev=0,1,0
+.br
+# To accomodate to remnant cdrskin-0.2.2 addresses
+.br
+dev_translation=+1,0,0+0,1,0
+.br
+# Some more options
+.br
+fifo_start_at=0
+.br
+fs=16m
+.br
+.SH SEE ALSO
+.TP
+Formatting track sources for cdrskin:
+.br
+.BR mkisofs (8),
+.BR genisoimage (8),
+.BR afio (1),
+.BR star (1)
+.br
+.TP
+Other CD burn programs:
+.br
+.BR cdrecord (1),
+.BR wodim (1)
+.br
+.TP
+For DVD burning:
+.br
+.BR growisofs (1)
+.br
+.SH AUTHOR
+cdrskin was written by Thomas Schmitt <scdbackup@gmx.net>.
+.PP
+This manual page was written by George Danchev <danchev@spnet.net> and
+Thomas Schmitt, for the Debian project and for all others.
+

libburn/tags/ZeroTwoSixTwo/cdrskin/cdrskin_eng.html

@@ -145,9 +145,10 @@ rw-permissions and retry the bus scan as non-superuser.
 <P>
 <DL>
 <DT>Download as source code (see README):</DT>
-<DD><A HREF="cdrskin-0.2.6.pl01.tar.gz">cdrskin-0.2.6.pl01.tar.gz</A>
+<DD><A HREF="cdrskin-0.2.6.pl02.tar.gz">cdrskin-0.2.6.pl02.tar.gz</A>
 (510 KB).
 </DD>
+<DD>(Most recent patch: backported man page from cdrskin-0.2.7)</DD>
 <DD>
 The "stable" cdrskin tarballs are source code identical with "stable" 
 libburn releases or with "stabilized" libburn SVN snapshots. They get

libburn/tags/ZeroTwoSixTwo/cdrskin/cdrskin_timestamp.h

@@ -1 +1 @@
-#define Cdrskin_timestamP "2006.11.23.102340"
+#define Cdrskin_timestamP "2006.12.16.090001"

libburn/tags/ZeroTwoSixTwo/cdrskin/changelog.txt

@@ -1710,35 +1710,48 @@ Coordinated scsi_notify_error() and scsi_error()
 
 ------------------------------------ cycle  - cdrskin-0.2.5 - 2006.11.22.142517
 
-23 Nov 2006  []
+23 Nov 2006  [433]
 cdrskin/changelog.txt
 Last cdrskin-0.2.5 cycle
 
 
+23 Nov 2006  [434] [tag ]
+- test/burn.c
+- test/master.c
+- test/tree.py
+- test/tree.pyc
+- test/rip.c
+Removed obsolete test programs
+
+
+2006.11.23.102340  [435] [tag ]
+Makefile.am
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin.c
+cdrskin/cdrskin_eng.html
+cdrskin/README
+cdrskin/wiki_plain.txt
++ cdrskin/add_ts_changes_to_libburn_0_2_6
++ cdrskin/add_ts_changes_to_libburn_0_2_7
+- cdrskin/add_ts_changes_to_libburn_0_2_4
+- cdrskin/add_ts_changes_to_libburn_0_2_5
+Version leap to 0.2.6
+
+
+2006.11.24.121745  [437]
+Version leap to 0.2.7
+
+
+2006.12.16.090001  []
+Makefile.am
++ cdrskin-0.2.6/cdrskin/cdrskin.1
+cdrskin-0.2.6/cdrskin/README
+cdrskin-0.2.6/cdrskin/cdrskin_eng.html
+cdrskin-0.2.6/cdrskin/changelog.txt
+cdrskin-0.2.6/cdrskin/cdrskin_timestamp.h
+Backported manpage to libburn-0.2.6 -> libburn-0.2.6.2
+
+
+
 ----------------------------------------- long term intentions:
 
-  []
-Truely recognize media type
-
-  []
--reset: ioctl(fd,CDROMRESET)  ioctl(fd,SG_SCSI_RESET,SG_SCSI_RESET_DEVICE)
-
-  []
-Open O_EXCL all devices in address resolution chain
-(Might help with non-standard hdX device siblings)
-
-  []
-Convert libburn_experimental: into LIBDAX_MSGS_SEV_DEBUG
-Convert burn_print() into libdax_msgs_submit()
-
-  []
-Test unlocking of all drives by burn_drive_info_free()
-Test unlocking of single drive by burn_drive_grab(), burn_drive_release()
-
-  []
-Clear outdated persistent read buffer after small CD image was read (ticket 57)
-
-  []
-Enable multi-session for write modes other than TAO
-
-