Inmplemented a system adapter for NetBSD

This commit is contained in:
Thomas Schmitt 2014-02-10 21:36:34 +00:00
parent eb600d4c0e
commit af51a13bce
5 changed files with 1065 additions and 5 deletions

View File

@ -1 +1 @@
#define Cdrskin_timestamP "2014.02.10.213159" #define Cdrskin_timestamP "2014.02.10.213500"

View File

@ -0,0 +1,71 @@
/* os-netbsd.h
Operating system specific libburn definitions and declarations. Included
by os.h in case of compilation for
NetBSD 6
with MMC transport adapter sg-netbsd.c
>>> for OpenBSD too ?
Copyright (C) 2010 - 2014 Thomas Schmitt <scdbackup@gmx.net>
provided under GPLv2+
Derived 2014 from libburn/os-solaris.c
*/
/** List of all signals which shall be caught by signal handlers and trigger
a graceful abort of libburn. (See man signal.h)
*/
/* Once as system defined macros */
#define BURN_OS_SIGNAL_MACRO_LIST \
SIGHUP, SIGINT, SIGQUIT, SIGILL, SIGTRAP, \
SIGABRT, SIGEMT, SIGFPE, SIGBUS, SIGSEGV, \
SIGSYS, SIGPIPE, SIGALRM, SIGTERM, SIGXCPU, \
SIGXFSZ, SIGVTALRM, SIGPROF, SIGUSR1, SIGUSR2
/* Once as text 1:1 list of strings for messages and interpreters */
#define BURN_OS_SIGNAL_NAME_LIST \
"SIGHUP", "SIGINT", "SIGQUIT", "SIGILL", "SIGTRAP", \
"SIGABRT", "SIGEMT", "SIGFPE", "SIGBUS", "SIGSEGV", \
"SIGSYS", "SIGPIPE", "SIGALRM", "SIGTERM", "SIGXCPU", \
"SIGXFSZ", "SIGVTALRM", "SIGPROF", "SIGUSR1", "SIGUSR2"
/* The number of above list items */
#define BURN_OS_SIGNAL_COUNT 20
/** To list all signals which shall surely not be caught */
#define BURN_OS_NON_SIGNAL_MACRO_LIST \
SIGKILL, SIGURG, SIGSTOP, SIGTSTP, SIGCONT, \
SIGCHLD, SIGTTIN, SIGTTOU, SIGIO, SIGWINCH, \
SIGINFO, SIGPWR
/* The number of above list items */
#define BURN_OS_NON_SIGNAL_COUNT 12
/* The maximum size for a (SCSI) i/o transaction */
/* Important : MUST be at least 32768 ! */
/* My Blu-ray burner LG GGW-H20 writes junk if stream recording is combined
with buffer size 32 kB. So stream recording is allowed only with size 64k.
*/
/* >>> ??? Does it do 64 kB ? */
#define BURN_OS_TRANSPORT_BUFFER_SIZE 65536
/* To hold the position of the most recently delivered address from
device enumeration.
*/
struct burn_drive_enumerator_struct {
int cdno;
};
#define BURN_OS_DEFINE_DRIVE_ENUMERATOR_T \
typedef struct burn_drive_enumerator_struct burn_drive_enumerator_t;
/* The list of operating system dependent elements in struct burn_drive.
Usually they are initialized in sg-*.c:enumerate_common().
*/
#define BURN_OS_TRANSPORT_DRIVE_ELEMENTS \
int fd;

View File

@ -3,7 +3,8 @@
Operating system specific libburn definitions and declarations. Operating system specific libburn definitions and declarations.
The macros defined here are used by libburn modules in order to The macros defined here are used by libburn modules in order to
avoid own system dependent case distinctions. avoid own system dependent case distinctions.
Copyright (C) 2009 Thomas Schmitt <scdbackup@gmx.net>, provided under GPLv2+ Copyright (C) 2009 - 2014 Thomas Schmitt <scdbackup@gmx.net>,
provided under GPLv2+
*/ */
#ifndef BURN_OS_H_INCLUDED #ifndef BURN_OS_H_INCLUDED
@ -14,6 +15,12 @@
*/ */
/* <<< Only for the time of Linux compilability tests */
#ifdef __NetBSD__
#define Libburn_use_sg_netbsD
#endif
#ifdef Libburn_use_sg_dummY #ifdef Libburn_use_sg_dummY
@ -29,6 +36,15 @@
#include "os-libcdio.h" #include "os-libcdio.h"
#else
#ifdef Libburn_use_sg_netbsD
/* To become: # ifdef __NetBSD__ */
/* -------------------------- NetBSD with SCIOCCOMMAND --------------------- */
#include "os-netbsd.h"
#else #else
#ifdef __FreeBSD__ #ifdef __FreeBSD__
@ -72,6 +88,7 @@
#endif /* ! __linux */ #endif /* ! __linux */
#endif /* ! __FreeBSD__kernel__ */ #endif /* ! __FreeBSD__kernel__ */
#endif /* ! __FreeBSD__ */ #endif /* ! __FreeBSD__ */
#endif /* ! Libburn_use_sg_netbsD */
#endif /* ! Libburn_use_libcdiO */ #endif /* ! Libburn_use_libcdiO */
#endif /* ! Libburn_use_sg_dummY */ #endif /* ! Libburn_use_sg_dummY */

View File

@ -0,0 +1,959 @@
/* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */
/*
Copyright (c) 2010 - 2014 Thomas Schmitt <scdbackup@gmx.net>
Provided under GPL version 2 or later.
Derived 2014 from libburn/sg-solaris.c with information learned from
dvd+rw-tools, http://fxr.watson.org/fxr/source/sys/scsiio.h?v=NETBSD,
http://netbsd.gw.com/cgi-bin/man-cgi?scsi+4+NetBSD-current,
and experiments made by Freddy Fisker.
*/
/*
This is the main operating system dependent SCSI part of libburn. It implements
the transport level aspects of SCSI control and command i/o.
Present implementation: NetBSD 6, ioctl SCIOCCOMMAND
>>> ??? for OpenBSD too ?
PORTING:
Porting libburn typically will consist of adding a new operating system case
to the following switcher files:
os.h Operating system specific libburn definitions and declarations.
sg.c Operating system dependent transport level modules.
and of deriving the following system specific files from existing examples:
os-*.h Included by os.h. You will need some general system knowledge
about signals and knowledge about the storage object needs of your
transport level module sg-*.c.
sg-*.c This source module. You will need special system knowledge about
how to detect all potentially available drives, how to open them,
eventually how to exclusively reserve them, how to perform
SCSI transactions, how to inquire the (pseudo-)SCSI driver.
You will not need to care about CD burning, MMC or other high-level
SCSI aspects.
Said sg-*.c operations are defined by a public function interface, which has
to be implemented in a way that provides libburn with the desired services:
sg_id_string() returns an id string of the SCSI transport adapter.
It may be called before initialization but then may
return only a preliminary id.
sg_initialize() performs global initialization of the SCSI transport
adapter and eventually needed operating system
facilities. Checks for compatibility of supporting
software components.
sg_shutdown() performs global finalizations and releases golbally
aquired resources.
sg_give_next_adr() iterates over the set of potentially useful drive
address strings.
scsi_enumerate_drives() brings all available, not-whitelist-banned, and
accessible drives into libburn's list of drives.
sg_dispose_drive() finalizes adapter specifics of struct burn_drive
on destruction. Releases resources which were aquired
underneath scsi_enumerate_drives().
sg_drive_is_open() tells wether libburn has the given drive in use.
sg_grab() opens the drive for SCSI commands and ensures
undisturbed access.
sg_release() closes a drive opened by sg_grab()
sg_issue_command() sends a SCSI command to the drive, receives reply,
and evaluates wether the command succeeded or shall
be retried or finally failed.
sg_obtain_scsi_adr() tries to obtain SCSI address parameters.
burn_os_is_2k_seekrw() tells whether the given path leads to a file object
that can be used in 2 kB granularity by lseek(2),
read(2), and possibly write(2) if not read-only..
E.g. a USB stick or a hard disk.
burn_os_stdio_capacity() estimates the emulated media space of stdio-drives.
burn_os_open_track_src() opens a disk file in a way that allows best
throughput with file reading and/or SCSI write command
transmission.
burn_os_alloc_buffer() allocates a memory area that is suitable for file
descriptors issued by burn_os_open_track_src().
The buffer size may be rounded up for alignment
reasons.
burn_os_free_buffer() delete a buffer obtained by burn_os_alloc_buffer().
Porting hints are marked by the text "PORTING:".
Send feedback to libburn-hackers@pykix.org .
*/
#ifdef HAVE_CONFIG_H
#include "../config.h"
#endif
/** PORTING : ------- OS dependent headers and definitions ------ */
#include <unistd.h>
#include <stdio.h>
#include <sys/types.h>
#include <errno.h>
#include <fcntl.h>
#include <sys/stat.h>
#include <string.h>
#include <stdlib.h>
#ifdef Libburn_os_has_statvfS
#include <sys/statvfs.h>
#endif /* Libburn_os_has_stavtfS */
#include <sys/ioctl.h>
/* <<< Porting mock-up to check general compilability by a Linux system
before bothering Freddy Fisker and his NetBSD .
Mostly from NetBSD 6 : /sys/scsiio.h
*** Do not run the resulting binary ***
*/
#ifdef __linux
#define SENSEBUFLEN 48
struct scsireq {
unsigned int flags; /* info about the request status and type */
unsigned int timeout;
unsigned char cmd[16]; /* 12 is actually the max */
unsigned char cmdlen;
void * databuf; /* address in user space of buffer */
unsigned int datalen; /* size of user buffer (request) */
unsigned int datalen_used; /* size of user buffer (used)*/
unsigned char sense[SENSEBUFLEN]; /* returned sense will be in here */
unsigned char senselen; /* sensedata request size (MAX of SENSEBUFLEN)*/
unsigned char senselen_used; /* return value only */
unsigned char status; /* what the scsi status was from the adapter */
unsigned char retsts; /* the return status for the command */
int error; /* error bits */
};
typedef struct scsireq scsireq_t;
#define SCCMD_READ 0x00000001
#define SCCMD_WRITE 0x00000002
#define SCCMD_ESCAPE 0x00000010
#define SCCMD_OK 0x00
#define SCCMD_SENSE 0x03
/* extra dummy values */
#define SCIOCCOMMAND 12345
#define SCIOCIDENTIFY 67890
struct oscsi_addr {
int scbus; /* -1 if wildcard */
int target; /* -1 if wildcard */
int lun; /* -1 if wildcard */
};
struct scsi_addr {
int type; /* bus type */
#define TYPE_SCSI 0
#define TYPE_ATAPI 1
union {
struct oscsi_addr scsi;
struct _atapi {
int atbus; /* -1 if wildcard */
int drive; /* -1 if wildcard */
} atapi;
} addr;
};
#else /* Linux compilability mock-up */
#include <sys/scsiio.h>
#endif /* ! Linux compilability mock-up */
/** PORTING : ------ libburn portable headers and definitions ----- */
#include "transport.h"
#include "drive.h"
#include "sg.h"
#include "spc.h"
#include "sbc.h"
#include "debug.h"
#include "toc.h"
#include "util.h"
#include "init.h"
#include "libdax_msgs.h"
extern struct libdax_msgs *libdax_messenger;
/* is in portable part of libburn */
int burn_drive_is_banned(char *device_address);
int burn_drive_resolve_link(char *path, char adr[],
int *recursion_count, int flag); /* drive.c */
/* Whether to log SCSI commands:
bit0= log in /tmp/libburn_sg_command_log
bit1= log to stderr
bit2= flush every line
*/
extern int burn_sg_log_scsi;
/* ------------------------------------------------------------------------ */
/* PORTING: Private definitions. Port only if needed by public functions. */
/* (Public functions are listed below) */
/* ------------------------------------------------------------------------ */
/* Storage object is in libburn/init.c
whether to strive for exclusive access to the drive
*/
extern int burn_sg_open_o_excl;
/* ------------------------------------------------------------------------ */
/* PORTING: Private functions. Port only if needed by public functions */
/* (Public functions are listed below) */
/* ------------------------------------------------------------------------ */
static int sg_close_drive(struct burn_drive * d)
{
if (d->fd != -1) {
close(d->fd);
d->fd = -1;
return 1;
}
return 0;
}
/* ----------------------------------------------------------------------- */
/* PORTING: Private functions which contain publicly needed functionality. */
/* Their portable part must be performed. So it is probably best */
/* to replace the non-portable part and to call these functions */
/* in your port, too. */
/* ----------------------------------------------------------------------- */
/** Wraps a detected drive into libburn structures and hands it over to
libburn drive list.
*/
static void enumerate_common(char *fname,
int bus_no, int host_no,
int channel_no, int target_no, int lun_no)
{
int ret;
struct burn_drive out;
/* General libburn drive setup */
burn_setup_drive(&out, fname);
/* This transport adapter uses SCSI-family commands and models
(seems the adapter would know better than its boss, if ever) */
ret = burn_scsi_setup_drive(&out, bus_no, host_no, channel_no,
target_no, lun_no, 0);
if (ret <= 0)
return;
/* PORTING: ------------------- non portable part --------------- */
/* Transport adapter is NetBSD SCIOCCOMMAND */
/* Adapter specific handles and data */
out.fd = -1;
/* PORTING: ---------------- end of non portable part ------------ */
/* Adapter specific functions with standardized names */
out.grab = sg_grab;
out.release = sg_release;
out.drive_is_open = sg_drive_is_open;
out.issue_command = sg_issue_command;
/* Finally register drive and inquire drive information */
burn_drive_finish_enum(&out);
}
static int start_enum_rcdNx(burn_drive_enumerator_t *idx, int flag)
{
idx->cdno = -1;
return 1;
}
/* Trying /dev/rcd[0..63][dc] */
#define Libburn_netbsd_max_cdnuM 63
static int next_enum_rcdNx(burn_drive_enumerator_t *idx,
char adr[], int adr_size, int flag)
{
static char suffix[2] = {'d', 'c'};
struct stat stbuf;
int i, stat_ret;
char path[16];
while (idx->cdno < Libburn_netbsd_max_cdnuM) {
idx->cdno++;
for (i = 0; i < 2; i++) {
sprintf(path, "/dev/rcd%d%c", idx->cdno, suffix[i]);
stat_ret = stat(path, &stbuf);
if (stat_ret == -1)
continue;
if (!S_ISCHR(stbuf.st_mode))
continue;
if ((int) strlen(path) >= adr_size)
continue;
strcpy(adr, path);
return 1;
}
}
return 0;
}
/* Searching the first byte address that cannot be lseeked and read
*/
static int guess_size_by_seek_set(int fd, off_t *bytes, int flag)
{
static off_t abs_limit = ((off_t) 1024) * 1024 * 1024 * 1024 * 1024;
off_t i, step = ((off_t) 1024) * 1024 * 1024 * 1024, ret;
char buf[1];
*bytes = 0;
for (i = step; i < abs_limit; i += step) {
ret = lseek(fd, i, SEEK_SET);
if (ret == -1) {
i -= step;
step = step >> 1;
if (step > 0)
continue;
return 1;
}
ret = read(fd, buf, 1);
if (ret == -1) {
i -= step;
step = step >> 1;
if (step > 0)
continue;
return 1;
}
*bytes = i;
}
return 0;
}
/* ------------------------------------------------------------------------ */
/* PORTING: Public functions. These MUST be ported. */
/* ------------------------------------------------------------------------ */
/** Returns the id string of the SCSI transport adapter and eventually
needed operating system facilities.
This call is usable even if sg_initialize() was not called yet. In that
case a preliminary constant message might be issued if detailed info is
not available yet.
@param msg returns id string
@param flag unused yet, submit 0
@return 1 = success, <=0 = failure
*/
int sg_id_string(char msg[1024], int flag)
{
sprintf(msg, "internal NetBSD SCIOCCOMMAND adapter sg-netbsd");
return 1;
}
/** Performs global initialization of the SCSI transport adapter and eventually
needed operating system facilities. Checks for compatibility of supporting
software components.
@param msg returns ids and/or error messages of eventual helpers
@param flag unused yet, submit 0
@return 1 = success, <=0 = failure
*/
int sg_initialize(char msg[1024], int flag)
{
return sg_id_string(msg, 0);
}
/** Performs global finalization of the SCSI transport adapter and eventually
needed operating system facilities. Releases globally aquired resources.
@param flag unused yet, submit 0
@return 1 = success, <=0 = failure
*/
int sg_shutdown(int flag)
{
return 1;
}
/** Finalizes BURN_OS_TRANSPORT_DRIVE_ELEMENTS, the components of
struct burn_drive which are defined in os-*.h.
The eventual initialization of those components was made underneath
scsi_enumerate_drives().
This will be called when a burn_drive gets disposed.
@param d the drive to be finalized
@param flag unused yet, submit 0
@return 1 = success, <=0 = failure
*/
int sg_dispose_drive(struct burn_drive *d, int flag)
{
return 1;
}
/** Returns the next index number and the next enumerated drive address.
The enumeration has to cover all available and accessible drives. It is
allowed to return addresses of drives which are not available but under
some (even exotic) circumstances could be available. It is on the other
hand allowed, only to hand out addresses which can really be used right
in the moment of this call. (This implementation chooses the former.)
@param idx An opaque handle. Make no own theories about it.
@param adr Takes the reply
@param adr_size Gives maximum size of reply including final 0
@param initialize 1 = start new,
0 = continue, use no other values for now
-1 = finish
@return 1 = reply is a valid address , 0 = no further address available
-1 = severe error (e.g. adr_size too small)
*/
int sg_give_next_adr(burn_drive_enumerator_t *idx,
char adr[], int adr_size, int initialize)
{
int ret;
if (initialize == 1) {
ret = start_enum_rcdNx(idx, 0);
if (ret <= 0)
return ret;
} else if (initialize == -1) {
return 0;
}
ret = next_enum_rcdNx(idx, adr, adr_size, 0);
return ret;
}
/** Brings all available, not-whitelist-banned, and accessible drives into
libburn's list of drives.
*/
int scsi_enumerate_drives(void)
{
burn_drive_enumerator_t idx;
int initialize = 1, ret, i_bus_no = -1, buf_size = 4096;
int i_host_no = -1, i_channel_no = -1, i_target_no = -1, i_lun_no = -1;
char *buf = NULL;
BURN_ALLOC_MEM(buf, char, buf_size);
while(1) {
ret = sg_give_next_adr(&idx, buf, buf_size, initialize);
initialize = 0;
if (ret <= 0)
break;
if (burn_drive_is_banned(buf))
continue;
sg_obtain_scsi_adr(buf, &i_bus_no, &i_host_no,
&i_channel_no, &i_target_no, &i_lun_no);
enumerate_common(buf,
i_bus_no, i_host_no, i_channel_no,
i_target_no, i_lun_no);
}
sg_give_next_adr(&idx, buf, buf_size, -1);
ret = 1;
ex:;
BURN_FREE_MEM(buf);
return ret;
}
/** Tells whether libburn has the given drive in use or exclusively reserved.
If it is "open" then libburn will eventually call sg_release() on it when
it is time to give up usage resp. reservation.
*/
/** Published as burn_drive.drive_is_open() */
int sg_drive_is_open(struct burn_drive * d)
{
return (d->fd != -1);
}
/** Opens the drive for SCSI commands and - if burn activities are prone
to external interference on your system - obtains an exclusive access lock
on the drive. (Note: this is not physical tray locking.)
A drive that has been opened with sg_grab() will eventually be handed
over to sg_release() for closing and unreserving.
*/
int sg_grab(struct burn_drive *d)
{
char *msg = NULL;
int os_errno, ret;
BURN_ALLOC_MEM(msg, char, 4096);
if (d->fd != -1) {
d->released = 0;
{ret = 1; goto ex;}
}
d->fd = open(d->devname, O_RDWR | O_NDELAY);
if (d->fd == -1) {
os_errno = errno;
sprintf(msg, "Could not grab drive '%s'", d->devname);
/* (errno == ENXIO is a device file with no drive attached) */
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020003,
errno == ENXIO ? LIBDAX_MSGS_SEV_DEBUG :
LIBDAX_MSGS_SEV_SORRY,
LIBDAX_MSGS_PRIO_HIGH,
msg, os_errno, 0);
{ret = 0; goto ex;}
}
d->released = 0;
/* Make sure by INQUIRY that this is really a MMC drive */
ret = spc_confirm_cd_drive(d, 0);
if (ret <= 0)
goto revoke;
/* # define Libburn_sg_netbsd_scsi_debuG */
#ifdef Libburn_sg_netbsd_scsi_debuG
{
static int sc_db = SC_DB_CMDS | SC_DB_FLOW;
ret = ioctl(d->fd, SCIOCDEBUG, &sc_db);
if (ret == -1)
fprintf(stderr,
"libburn_DEBUG: ioctl(%d, SCIOCDEBUG, &(0x%X)) returns %d, errno = %d\n",
d->fd, (unsigned int) sc_db, ret, errno);
}
#endif
{ret = 1; goto ex;}
revoke:;
sprintf(msg, "Could not grab drive '%s'.", d->devname);
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020003,
LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
msg, 0, 0);
if (d->fd >= 0) {
close(d->fd);
d->fd = -1;
d->released = 1;
}
ret = 0;
ex:;
BURN_FREE_MEM(msg);
return ret;
}
/** PORTING: Is mainly about the call to sg_close_drive() and whether it
implements the demanded functionality.
*/
/** Gives up the drive for SCSI commands and releases eventual access locks.
(Note: this is not physical tray locking.)
*/
int sg_release(struct burn_drive *d)
{
if (d->fd < 0)
return 0;
sg_close_drive(d);
return 0;
}
/** Sends a SCSI command to the drive, receives reply and evaluates wether
the command succeeded or shall be retried or finally failed.
Returned SCSI errors shall not lead to a return value indicating failure.
The callers get notified by c->error. An SCSI failure which leads not to
a retry shall be notified via scsi_notify_error().
The Libburn_log_sg_commandS facility might be of help when problems with
a drive have to be examined. It shall stay disabled for normal use.
@return: 1 success , <=0 failure
*/
int sg_issue_command(struct burn_drive *d, struct command *c)
{
int i, timeout_ms, ret, key, asc, ascq, done = 0, sense_len, max_sl;
time_t start_time;
scsireq_t req;
char msg[160];
static FILE *fp = NULL;
c->error = 0;
if (d->fd == -1)
return 0;
if (burn_sg_log_scsi & 1) {
if (fp == NULL) {
fp= fopen("/tmp/libburn_sg_command_log", "a");
fprintf(fp,
"\n-----------------------------------------\n");
}
}
if (burn_sg_log_scsi & 3)
scsi_log_cmd(c,fp,0);
if (c->timeout > 0)
timeout_ms = c->timeout;
else
timeout_ms = 200000;
memset (&req, 0, sizeof(req));
memcpy(req.cmd, c->opcode, c->oplen);
req.cmdlen = c->oplen;
req.databuf = (caddr_t) c->page->data;
req.flags = SCCMD_ESCAPE; /* probably to make req.cmdlen significant */
req.timeout = timeout_ms;
max_sl = sizeof(c->sense) > SENSEBUFLEN ?
SENSEBUFLEN : sizeof(c->sense);
req.senselen = max_sl;
if (c->dir == TO_DRIVE) {
req.datalen = c->page->bytes;
req.flags |= SCCMD_WRITE;
} else if (c->dir == FROM_DRIVE) {
req.flags |= SCCMD_READ;
if (c->dxfer_len >= 0)
req.datalen = c->dxfer_len;
else
req.datalen = BUFFER_SIZE;
/* touch page so we can use valgrind */
memset(c->page->data, 0, BUFFER_SIZE);
} else {
req.flags |= SCCMD_READ;
req.datalen = 0;
}
/* retry-loop */
start_time = time(NULL);
for(i = 0; !done; i++) {
memset(c->sense, 0, sizeof(c->sense));
c->start_time = burn_get_time(0);
ret = ioctl(d->fd, SCIOCCOMMAND, &req);
/* <<< Fault mock-up
if (c->opcode[0] == 0x28) {
ret = -1;
errno = 9;
}
*/
c->end_time = burn_get_time(0);
/* #define Libburn_debug_sg_netbsD */
#ifdef Libburn_debug_sg_netbsD
fprintf(stderr, "libburn_DEBUG: ret= %d, retsts = 0x%X, senselen_used = %d, status = 0x%X, error= 0x%X\n", ret, (unsigned int) req.retsts, (int) req.senselen_used, (unsigned int) req.status, req.error);
fprintf(stderr, "libburn_DEBUG: datalen_used = %u\n",
(unsigned int) req.datalen_used);
#endif
if (ret != 0 ||
(req.retsts != SCCMD_SENSE && req.retsts != SCCMD_OK)) {
sprintf(msg, "Failed to transfer command to drive. (ioctl(%d, SCIOCCOMMAND) = %d, scsireq_t.retsts = 0x%X, errno= %d)",
d->fd, ret, (unsigned int) req.retsts, errno);
if (burn_sg_log_scsi & 3)
scsi_log_message(d, fp, msg, 0);
libdax_msgs_submit(libdax_messenger,
d->global_index, 0x0002010c,
LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
msg, errno, 0);
sg_close_drive(d);
d->released = 1;
d->busy = BURN_DRIVE_IDLE;
c->error = 1;
return -1;
}
sense_len = 0;
if (req.retsts == SCCMD_SENSE) {
memcpy(c->sense, req.sense, max_sl);
sense_len = req.senselen > max_sl ?
max_sl : req.senselen;
}
spc_decode_sense(c->sense, sense_len, &key, &asc, &ascq);
if (key || asc || ascq)
sense_len = req.senselen;
else
sense_len = 0;
/* <<< Fault mock-up
if (c->opcode[0] == 0x5a) {
req.datalen_used = 0;
memset(c->page->data, 0, BUFFER_SIZE);
}
*/
if (c->dir == FROM_DRIVE && sense_len == 0 &&
req.datalen > 0 && req.datalen_used < req.datalen) {
sprintf(msg, "Short reply from SCSI command %2.2X: expected: %d, got: %d, req.retsts: 0x%X",
(unsigned int) c->opcode[0],
(int) req.datalen, (int) req.datalen_used,
(unsigned int) req.retsts);
if (burn_sg_log_scsi & 3)
scsi_log_message(d, fp, msg, 0);
libdax_msgs_submit(libdax_messenger,
d->global_index, 0x00000002,
LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_HIGH,
msg, 0, 0);
if (req.datalen_used == 0)
c->error = 1;
c->dxfer_len = req.datalen_used;
}
done = scsi_eval_cmd_outcome(d, c, fp, c->sense, sense_len,
start_time, timeout_ms, i, 0);
if (d->cancel)
done = 1;
} /* end of retry-loop */
return 1;
}
/** Tries to obtain SCSI address parameters.
@return 1 is success , 0 is failure
*/
int sg_obtain_scsi_adr(char *path, int *bus_no, int *host_no, int *channel_no,
int *target_no, int *lun_no)
{
int ret, fd = -1;
struct scsi_addr addr;
fd = open(path, O_RDWR | O_NDELAY);
if (fd == -1)
return 0;
*bus_no = *host_no = *channel_no = *target_no = *lun_no = 0;
memset(&addr, 0, sizeof(addr));
ret = ioctl(fd, SCIOCIDENTIFY, &addr);
if (ret != 0)
{ret = 0; goto ex;}
if (addr.type != TYPE_SCSI)
{ret = 0; goto ex;}
*bus_no = *host_no = addr.addr.scsi.scbus;
*channel_no = 0;
*target_no = addr.addr.scsi.target;
*lun_no = addr.addr.scsi.lun;
ret = 1;
ex:;
if (fd != -1)
close(fd);
return (0);
}
/** Tells wether a text is a persistent address as listed by the enumeration
functions.
*/
int sg_is_enumerable_adr(char* adr)
{
burn_drive_enumerator_t idx;
int initialize = 1, ret;
char buf[64];
while(1) {
ret = sg_give_next_adr(&idx, buf, sizeof(buf), initialize);
initialize = 0;
if (ret <= 0)
break;
if (strcmp(adr, buf) == 0) {
sg_give_next_adr(&idx, buf, sizeof(buf), -1);
return 1;
}
}
sg_give_next_adr(&idx, buf, sizeof(buf), -1);
return (0);
}
/* Return 1 if the given path leads to a regular file or a device that can be
seeked, read, and possibly written with 2 kB granularity.
*/
int burn_os_is_2k_seekrw(char *path, int flag)
{
struct stat stbuf;
int l, i, dev, tl;
char try[16], *cpt;
/* >>> ??? Is this a comprehensive list of lseek()-capable devices ? */
/* http://www.netbsd.org/docs/guide/en/chap-rmmedia.html */
static char dev_names[][4] = {
"fd", "rfd", "sd" , "cd", "rcd", "wd", ""};
if (path[0] == 0)
return 0;
if (stat(path, &stbuf) == -1)
return 0;
if (S_ISREG(stbuf.st_mode))
return 1;
if (S_ISBLK(stbuf.st_mode))
return 1;
/* Look for known device names which promise the desired capabilities */
if (strncmp(path, "/dev/", 5) != 0)
return 0;
l = strlen(path);
for (dev = 0; dev_names[dev][0] != 0; dev++) {
sprintf(try, "/dev/%s", dev_names[dev]);
tl = strlen(try);
if (strncmp(path, try, tl) != 0)
continue;
cpt = path + tl;
l -= tl;
for (i = 0; i < Libburn_netbsd_max_cdnuM; i++) {
sprintf(try + tl, "%d", i);
if (strncmp(path, try, strlen(try)) == 0)
break;
}
if (i >= Libburn_netbsd_max_cdnuM)
continue;
tl += strlen(try + tl);
if (l == tl)
return 1;
if (l > tl + 1)
continue;
if (path[l - 1] >= 'a' && path[l - 1] <= 'z')
return 1;
}
return 0;
}
/** Estimate the potential payload capacity of a file address.
@param path The address of the file to be examined. If it does not
exist yet, then the directory will be inquired.
@param bytes The pointed value gets modified, but only if an estimation is
possible.
@return -2 = cannot perform necessary operations on file object
-1 = neither path nor dirname of path exist
0 = could not estimate size capacity of file object
1 = estimation has been made, bytes was set
*/
int burn_os_stdio_capacity(char *path, off_t *bytes)
{
struct stat stbuf;
int ret;
#ifdef Libburn_os_has_statvfS
struct statvfs vfsbuf;
#endif
char *testpath = NULL, *cpt;
off_t add_size = 0;
BURN_ALLOC_MEM(testpath, char, 4096);
testpath[0] = 0;
if (stat(path, &stbuf) == -1) {
strcpy(testpath, path);
cpt = strrchr(testpath, '/');
if(cpt == NULL)
strcpy(testpath, ".");
else if(cpt == testpath)
testpath[1] = 0;
else
*cpt = 0;
if (stat(testpath, &stbuf) == -1)
{ret = -1; goto ex;}
} else if(S_ISBLK(stbuf.st_mode)) {
int open_mode = O_RDONLY, fd;
fd = open(path, open_mode);
if (fd == -1)
{ret = -2; goto ex;}
*bytes = lseek(fd, 0, SEEK_END);
if (*bytes <= 0)
guess_size_by_seek_set(fd, bytes, 0);
close(fd);
if (*bytes == -1) {
*bytes = 0;
{ret = 0; goto ex;}
}
} else if(S_ISREG(stbuf.st_mode)) {
add_size = stbuf.st_blocks * (off_t) 512;
strcpy(testpath, path);
} else
{ret = 0; goto ex;}
if (testpath[0]) {
#ifdef Libburn_os_has_statvfS
if (statvfs(testpath, &vfsbuf) == -1)
{ret = -2; goto ex;}
*bytes = add_size + ((off_t) vfsbuf.f_frsize) *
(off_t) vfsbuf.f_bavail;
#else /* Libburn_os_has_statvfS */
{ret = 0; goto ex;}
#endif /* ! Libburn_os_has_stavtfS */
}
ret = 1;
ex:;
BURN_FREE_MEM(testpath);
return ret;
}
/* ts A91122 : an interface to open(O_DIRECT) or similar OS tricks. */
#ifdef Libburn_read_o_direcT
/* No special O_DIRECT-like precautions are implemented here */
#endif /* Libburn_read_o_direcT */
int burn_os_open_track_src(char *path, int open_flags, int flag)
{
int fd;
fd = open(path, open_flags);
return fd;
}
void *burn_os_alloc_buffer(size_t amount, int flag)
{
void *buf = NULL;
buf = calloc(1, amount);
return buf;
}
int burn_os_free_buffer(void *buffer, size_t amount, int flag)
{
if (buffer == NULL)
return 0;
free(buffer);
return 1;
}

View File

@ -1,7 +1,7 @@
/* sg.c /* sg.c
Switcher for operating system dependent transport level modules of libburn. Switcher for operating system dependent transport level modules of libburn.
Copyright (C) 2009 - 2010 Thomas Schmitt <scdbackup@gmx.net>, Copyright (C) 2009 - 2014 Thomas Schmitt <scdbackup@gmx.net>,
provided under GPLv2+ provided under GPLv2+
*/ */
@ -11,6 +11,12 @@
#endif #endif
/* <<< Only for the time of Linux compilability tests */
#ifdef __NetBSD__
#define Libburn_use_sg_netbsD
#endif
#ifdef Libburn_use_sg_dummY #ifdef Libburn_use_sg_dummY
#include "sg-dummy.c" #include "sg-dummy.c"
@ -20,6 +26,12 @@
#include "sg-libcdio.c" #include "sg-libcdio.c"
#else
#ifdef Libburn_use_sg_netbsD
/* To become: # ifdef __NetBSD__ */
#include "sg-netbsd.c"
#else #else
#ifdef __FreeBSD__ #ifdef __FreeBSD__
@ -58,11 +70,11 @@
static int intentional_compiler_warning(void) static int intentional_compiler_warning(void)
{ {
int INTENTIONAL_COMPILER_WARNING_; int INTENTIONAL_COMPILER_WARNING_;
int Cannot_recognize_GNU_Linux_nor_FreeBSD_nor_Solaris_; int Cannot_recognize_GNU_Linux_nor_FreeBSD_nor_Solaris_nor_NetBSD_;
int Have_to_use_dummy_MMC_transport_adapter_; int Have_to_use_dummy_MMC_transport_adapter_;
int This_libburn_will_not_be_able_to_operate_on_real_CD_drives; int This_libburn_will_not_be_able_to_operate_on_real_CD_drives;
int Have_to_use_dummy_MMC_transport_adapter; int Have_to_use_dummy_MMC_transport_adapter;
int Cannot_recognize_GNU_Linux_nor_FreeBSD_nor_Solaris; int Cannot_recognize_GNU_Linux_nor_FreeBSD_nor_Solaris_nor_NetBSD_;
int INTENTIONAL_COMPILER_WARNING; int INTENTIONAL_COMPILER_WARNING;
return(0); return(0);
@ -74,6 +86,7 @@ static int intentional_compiler_warning(void)
#endif /* ! __linux */ #endif /* ! __linux */
#endif /* ! __FreeBSD_kernel__ */ #endif /* ! __FreeBSD_kernel__ */
#endif /* ! __FreeBSD__ */ #endif /* ! __FreeBSD__ */
#endif /* ! Libburn_use_sg_netbsD */
#endif /* ! Libburn_use_libcdiO */ #endif /* ! Libburn_use_libcdiO */
#endif /* ! Libburn_use_sg_dummY */ #endif /* ! Libburn_use_sg_dummY */