Version leap to 0.2.6

libburn/trunk/Makefile.am

@@ -103,7 +103,7 @@ test_structest_SOURCES = test/structest.c
 
 ##  cdrskin construction site - ts A60816
 cdrskin_cdrskin_CPPFLAGS = -Ilibburn
-cdrskin_cdrskin_CFLAGS = -DCdrskin_libburn_0_2_3
+cdrskin_cdrskin_CFLAGS = -DCdrskin_libburn_0_2_6
 cdrskin_cdrskin_LDADD = $(libburn_libburn_la_OBJECTS) $(THREAD_LIBS)
 cdrskin_cdrskin_SOURCES = cdrskin/cdrskin.c cdrskin/cdrfifo.c cdrskin/cdrfifo.h cdrskin/cdrskin_timestamp.h
 ##

libburn/trunk/cdrskin/README

@@ -26,12 +26,12 @@ following possible.
 cdrskin. By Thomas Schmitt <scdbackup@gmx.net>
 Integrated sub project of libburn.pykix.org but also published via:
 http://scdbackup.sourceforge.net/cdrskin_eng.html
-http://scdbackup.sourceforge.net/cdrskin-0.2.5.tar.gz
+http://scdbackup.sourceforge.net/cdrskin-0.2.6.pl01.tar.gz
 Copyright (C) 2006 Thomas Schmitt
 
 ------------------------------------------------------------------------------
 
-On top of libburn there is implemented cdrskin 0.2.5, a limited cdrecord
+On top of libburn there is implemented cdrskin 0.2.6, a limited cdrecord
 compatibility wrapper which allows to use some libburn features from
 the command line.
 Interested users of cdrecord are invited to participate in the development
@@ -59,16 +59,16 @@ systems, including 64 bit systems. (Further reports are welcome.)
 
                    Compilation, First Glimpse, Installation
 
-Obtain cdrskin-0.2.5.tar.gz , take it to a directory of your choice and do:
+Obtain cdrskin-0.2.6.pl01.tar.gz, take it to a directory of your choice and do:
 
-    tar xzf cdrskin-0.2.5.tar.gz
+    tar xzf cdrskin-0.2.6.pl01.tar.gz
-    cd cdrskin-0.2.5
+    cd cdrskin-0.2.6
 
 Or obtain a libburn.pykix.org SVN snapshot,
 go into the toplevel directory of the snapshot (e.g.  cd libburn_pykix ),
 and execute the autotools script ./bootstrap . Use autools version >= 1.7 .
 
-Within that toplevel directory of either cdrskin-0.2.5 or libburn then execute:
+Within that toplevel directory of either cdrskin-0.2.6 or libburn then execute:
 
     ./configure
     make

libburn/trunk/cdrskin/add_ts_changes_to_libburn_0_2_6

@@ -36,10 +36,13 @@ intermediate="./libburn_pykix"
 # My changes are in libburn-0.2.3.ts.develop , mainly in ./cdrskin
 
 changes="./libburn-0.2.3.ts.develop"
-skin_rev="0.2.4"
+skin_release="0.2.6"
+patch_level=".pl01"
+skin_rev="$skin_release""$patch_level"
+
 
 # The result directory and the name of the result tarballs
-target="./cdrskin-${skin_rev}"
+target="./cdrskin-${skin_release}"
 cdrskin_tarball="./cdrskin-${skin_rev}.tar.gz"
 cdrskin_tarball_svn="./cdrskin-${skin_rev}.svn.tar.gz"
 

libburn/trunk/cdrskin/add_ts_changes_to_libburn_0_2_7

@@ -36,7 +36,7 @@ intermediate="./libburn_pykix"
 # My changes are in libburn-0.2.3.ts.develop , mainly in ./cdrskin
 
 changes="./libburn-0.2.3.ts.develop"
-skin_rev="0.2.5"
+skin_rev="0.2.7"
 
 # The result directory and the name of the result tarballs
 target="./cdrskin-${skin_rev}"

libburn/trunk/cdrskin/cdrskin.c

@@ -123,7 +123,7 @@ or
 
 /** The official program version */
 #ifndef Cdrskin_prog_versioN
-#define Cdrskin_prog_versioN "0.2.5"
+#define Cdrskin_prog_versioN "0.2.6"
 #endif
 
 /** The source code release timestamp */
@@ -156,14 +156,25 @@ or
 #endif /* Cdrskin_libburn_cvs_A60220_tS */
 
 
-#ifdef Cdrskin_libburn_0_2_2
+#ifdef Cdrskin_libburn_0_2_6
-#define Cdrskin_libburn_versioN "0.2.2"
+#define Cdrskin_libburn_versioN "0.2.6"
+#define Cdrskin_libburn_from_pykix_svN 1
+#endif /* Cdrskin_libburn_0_2_6 */
+
+#ifndef Cdrskin_libburn_versioN
+#define Cdrskin_libburn_versioN "0.2.6"
 #define Cdrskin_libburn_from_pykix_svN 1
 #endif
 
-#ifdef Cdrskin_libburn_0_2_3
+#ifdef Cdrskin_libburn_from_pykix_svN
-#define Cdrskin_libburn_versioN "0.2.3"
+#ifndef Cdrskin_oldfashioned_api_usE
-#define Cdrskin_libburn_from_pykix_svN 1
+
+#define Cdrskin_libburn_does_ejecT 1
+#define Cdrskin_libburn_has_drive_get_adR 1
+#define Cdrskin_progress_track_does_worK 1
+#define Cdrskin_is_erasable_on_load_does_worK 1
+#define Cdrskin_grab_abort_does_worK 1
+#define Cdrskin_allow_libburn_taO 1
 #define Cdrskin_libburn_has_is_enumerablE 1
 #define Cdrskin_libburn_has_convert_fs_adR 1
 #define Cdrskin_libburn_has_convert_scsi_adR 1
@@ -178,21 +189,6 @@ or
 #define Cdrskin_libburn_has_pretend_fulL 1
 #define Cdrskin_libburn_has_multI 1
 #define Cdrskin_libburn_has_buffer_min_filL 1
-#endif
-
-#ifndef Cdrskin_libburn_versioN
-#define Cdrskin_libburn_versioN "0.2.2"
-#define Cdrskin_libburn_from_pykix_svN 1
-#endif
-
-#ifdef Cdrskin_libburn_from_pykix_svN
-
-#define Cdrskin_libburn_does_ejecT 1
-#define Cdrskin_libburn_has_drive_get_adR 1
-#define Cdrskin_progress_track_does_worK 1
-#define Cdrskin_is_erasable_on_load_does_worK 1
-#define Cdrskin_grab_abort_does_worK 1
-#define Cdrskin_allow_libburn_taO 1
 
 #ifdef Cdrskin_new_api_tesT
 
@@ -204,14 +200,10 @@ or
 #define Cdrskin_atip_speed_is_oK 1
 #endif
 
-#endif
+#endif /* Cdrskin_new_api_tesT */
 
-#ifdef Cdrskin_oldfashioned_api_usE
-
-/* switch back to pre-0.2.2 libburn usage */;
-
-#endif
 
+#endif /* ! Cdrskin_oldfashioned_api_usE */
 #endif /* Cdrskin_libburn_from_pykix_svN */
 
 

libburn/trunk/cdrskin/cdrskin_eng.html

@@ -51,7 +51,7 @@ A CD recorder suitable for
 GPL software included:<BR>
 </H2>
 <DL>
-<DT>libburn-0.2.3 stabilized SVN snapshot</DT>
+<DT>libburn-0.2.6</DT>
 <DD>(by Derek Foreman, Ben Jansens, and team of libburn.pykix.org)</DD>
 <DD>transfers data to CD</DD>
 </DL>
@@ -99,9 +99,7 @@ wishes as well as on the development of libburn.</DT>
 <DD>$ cdrskin -v dev=/dev/dvd blank=fast -eject</DD>
 <DT>Write ISO-9660 filesystem image:</DT>
 <DD>$ cdrskin -v dev=/dev/hdc speed=12 fs=8m driveropts=burnfree -sao -eject padsize=300k my_image.iso</DD>
-<DT>Write compressed afio archive on-the-fly via cdrskin-0.2.4 :</DT>
+<DT>Write compressed afio archive on-the-fly :</DT>
-<DD>$ find . | afio -oZ - | cdrskin -v dev=0,1,0 fs=32m speed=8 driveropts=burnfree padsize=300k -sao tsize=650m -</DD>
-<DT>Write compressed afio archive on-the-fly via cdrskin-0.2.5 :</DT>
 <DD>$ find . | afio -oZ - | cdrskin -v dev=0,1,0 fs=32m speed=8 driveropts=burnfree padsize=300k -tao -</DD>
 <DT>Write audio tracks:</DT>
 <DD>$ cdrskin -v dev=ATA:1,0,0 speed=48 driveropts=burnfree -sao track1.wav track2.au -audio -swab track3.raw
@@ -125,13 +123,7 @@ wishes as well as on the development of libburn.</DT>
 <UL>
 <DT></DT>
 <LI>
-Burns only a single closed session. No -multi option yet.
+Appending sessions to unclosed media is restricted to write mode TAO.
-Note: Development version 0.2.5 offers multi-session now. See below.
-</LI>
-<LI>
-No TAO mode in cdrskin-0.2.4 and therefore no writing on-the-fly without
-a predefined source size.<BR>
-Note: Development version 0.2.5 offers TAO now. See below.
 </LI>
 <LI>
 cdrskin -scanbus or --devices hangs for quite a while if there is 
@@ -153,7 +145,7 @@ rw-permissions and retry the bus scan as non-superuser.
 <P>
 <DL>
 <DT>Download as source code (see README):</DT>
-<DD><A HREF="cdrskin-0.2.4.pl01.tar.gz">cdrskin-0.2.4.pl01.tar.gz</A>
+<DD><A HREF="cdrskin-0.2.6.pl01.tar.gz">cdrskin-0.2.6.pl01.tar.gz</A>
 (510 KB).
 </DD>
 <DD>
@@ -164,14 +156,14 @@ cdrskin is part of libburn - full libburn is provided with cdrskin releases.
 </DD>
 <DD>&nbsp;</DD>
 <DT>Download as single x86 binaries (untar and move to /usr/bin/cdrskin):</DT>
-<DD><A HREF="cdrskin_0.2.4.pl01-x86-suse9_0.tar.gz">
+<DD><A HREF="cdrskin_0.2.6.pl01-x86-suse9_0.tar.gz">
-cdrskin_0.2.4.pl01-x86-suse9_0.tar.gz</A>, (60 KB),
+cdrskin_0.2.6.pl01-x86-suse9_0.tar.gz</A>, (60 KB),
 <DL>
 <DD>runs on SuSE 9.0 (2.4.21) , RIP-14.4 (2.6.14) ,
  Gentoo (2.6.15 x86_64 Athlon).</DD>
 </DL>
-<DD><A HREF="cdrskin_0.2.4.pl01-x86-suse9_0-static.tar.gz">
+<DD><A HREF="cdrskin_0.2.6.pl01-x86-suse9_0-static.tar.gz">
-cdrskin_0.2.4.pl01-x86-suse9_0-static.tar.gz</A>, (260 KB), -static compiled,
+cdrskin_0.2.6.pl01-x86-suse9_0-static.tar.gz</A>, (260 KB), -static compiled,
 <DL>
 <DD>runs on SuSE 7.2 (2.4.4), and on the systems above.</DD>
 </DL>
@@ -195,22 +187,23 @@ cdrskin_0.2.4.pl01-x86-suse9_0-static.tar.gz</A>, (260 KB), -static compiled,
 <HR>
 
 <P>
-Enhancements towards previous stable version cdrskin-0.2.2:
+Enhancements towards previous stable version cdrskin-0.2.4:
 <UL>
-<LI>cdrecord compatibility with drive addresses of form [ATA:]Bus,Target,Lun.
+<LI>Option <KBD><B>-tao</B></KBD> is fully enabled.<BR>
-<BR>(use option --old_pseudo_scsi_adr to get back the incompatible
+    SAO is still the preferred default but TAO is default if a track of
-     Bus,Traget,Lun addressing of version 0.2.2)
+    unpredicted size is present (stdin, named pipe, ...) or if a follow-up
+    session is written to an appendable CD.
+    (This is an intentional deviation from cdrecord defaults which themselves
+     have changed with the newest cdrecord versions.)
 </LI>
-<LI>Drives adressable via links and device siblings (/dev/cdrom , /dev/scd0).
+<LI>Status report during blank, preparation and finalization improved.</LI>
-</LI>
+<LI>Bug fixed: Trailing trash appended to .wav files caused error message
-<LI>Automatic -audio extraction with .wav files and .au files.
+    and, if exceeding fifo size, could even stall a burn. 
-</LI>
+    (Workaround: disable fifo by <KBD><B>fs=0</B></KBD>)</LI>
-<LI>Bug fix about failure to eject.</LI>
+<LI>Bug fixed: False speed with first pacifier cycle. Potential program
-<LI>Comments and empty lines allowed in startup files.</LI>
+    abort by floating point exception (NaN).</LI>
-<LI>Options -scanbus and --devices print SORRY messages about busy drives.
+<LI>multi-session CDs: <KBD><B>-multi</B></KBD>, <KBD><B>-msinfo</B></KBD>,
-</LI>
+    writing to appendable CDs (for now restricted to write mode TAO).</LI>
-<LI>Drive buffer fill indicator reports realistic percentage numbers.</LI>
-<LI>Option -toc is supported, drive firmware revision gets displayed.</LI>
 </UL>
 </P>
 
@@ -218,30 +211,14 @@ Enhancements towards previous stable version cdrskin-0.2.2:
 
 <P>
 <DL>
-<DT><H3>Development snapshot, version 0.2.5 :</H3></DT>
+<DT><H3>Development snapshot, version 0.2.7 :</H3></DT>
-<DD>Enhancements towards stable version 0.2.4:
+<DD>Enhancements towards stable version 0.2.6:
- <UL>
+(none yet)
- <LI>Option <KBD><B>-tao</B></KBD> is fully enabled.<BR>
-     SAO is still the preferred default but TAO is default if a track of
-     unpredicted size is present (stdin, named pipe, ...) or if a follow-up
-     session is written to an appendable CD.
-     (This is an intentional deviation from cdrecord defaults which themselves
-      have changed with the newest cdrecord versions.)
- </LI>
- <LI>Status report during blank, preparation and finalization improved.</LI>
- <LI>Bug fixed: Trailing trash appended to .wav files caused error message
-     and, if exceeding fifo size, could even stall a burn. 
-     (Workaround: disable fifo by <KBD><B>fs=0</B></KBD>)</LI>
- <LI>Bug fixed: False speed with first pacifier cycle. Potential program
-     abort by floating point exception (NaN).</LI>
- <LI>multi-session CDs: <KBD><B>-multi</B></KBD>, <KBD><B>-msinfo</B></KBD>,
-     writing to appendable CDs (for now restricted to write mode TAO).</LI>
- </UL>
 </DD>
 <DD>&nbsp;</DD>
-<DD><A HREF="README_cdrskin_devel">README 0.2.5</A>
+<DD><A HREF="README_cdrskin_devel">README 0.2.7</A>
-<DD><A HREF="cdrskin__help_devel">cdrskin_0.2.5 --help</A></DD>
+<DD><A HREF="cdrskin__help_devel">cdrskin_0.2.7 --help</A></DD>
-<DD><A HREF="cdrskin_help_devel">cdrskin_0.2.5 -help</A></DD>
+<DD><A HREF="cdrskin_help_devel">cdrskin_0.2.7 -help</A></DD>
 <DD>&nbsp;</DD>
 <DT>Maintainers of cdrskin unstable packages please use SVN of
 <A HREF="http://libburn.pykix.org"> libburn.pykix.org</A></DT>
@@ -261,15 +238,15 @@ admins with full system souvereignty.</DT>
 <A HREF="README_cdrskin_devel">upcoming README</A> ):
 </DD>
 <DD>
-<A HREF="cdrskin-0.2.5.tar.gz">cdrskin-0.2.5.tar.gz</A>
+<A HREF="cdrskin-0.2.7.tar.gz">cdrskin-0.2.7.tar.gz</A>
 (500 KB).
 </DD>
 <DD>Binary (untar and move to /usr/bin/cdrskin):</DD>
-<DD><A HREF="cdrskin_0.2.5-x86-suse9_0.tar.gz">
+<DD><A HREF="cdrskin_0.2.7-x86-suse9_0.tar.gz">
-cdrskin_0.2.5-x86-suse9_0.tar.gz</A>, (60 KB).
+cdrskin_0.2.7-x86-suse9_0.tar.gz</A>, (60 KB).
 </DD>
-<DD><A HREF="cdrskin_0.2.5-x86-suse9_0-static.tar.gz">
+<DD><A HREF="cdrskin_0.2.7-x86-suse9_0-static.tar.gz">
-cdrskin_0.2.5-x86-suse9_0-static.tar.gz</A>, (260 KB)
+cdrskin_0.2.7-x86-suse9_0-static.tar.gz</A>, (260 KB)
 </DD>
 </DL>
 </P>
@@ -322,14 +299,6 @@ is a GUI frontend which uses cdrecord for CD burning.)
 <DT>Example for a test session with a cdrecord based scdbackup installation:</DT>
 <DD>$ <KBD><B>cdrskin -scanbus</B></KBD></DD>
 <DD><KBD>...</KBD></DD>
-</DL>
-If your system is stricken with some ill CD device then this can stall
-and you will have to press <KBD>Ctrl+C</KBD> to abort.
-In this case, you may execute
-<KBD>export SCDBACKUP_NO_SCANBUS=1</KBD>
-and try again.
-<DL>
-<DT></DT>
 <DD><KBD>&nbsp;&nbsp;&nbsp; 2,0,0 &nbsp;&nbsp; 0)&nbsp; 'TEAC' 'CD-ROM CD-532S' '?' Removable CD-ROM</KBD></DD>
 <DD>$ <KBD><B>cdrskin -scanbus dev=ATA</B></KBD></DD>
 <DD><KBD>...</KBD></DD>
@@ -344,8 +313,15 @@ and try again.
 <DD>$ <KBD><B>export SCDBACKUP_USE_CDRSKIN=1</B></KBD></DD>
 <DD>$ <KBD><B>./CONFIGURE_CD</B></KBD></DD>
 <DD><KBD>...</KBD></DD>
-<DD><KBD>cdrskin 0.2.4 : limited cdrecord compatibility wrapper for libburn</KBD></DD>
+<DD><KBD>cdrskin 0.2.6 : limited cdrecord compatibility wrapper for libburn</KBD></DD>
-<DD><KBD>...</KBD></DD>
+</DL>
+If your system is stricken with some ill CD device then this can stall
+and you will have to press <KBD>Ctrl+C</KBD> to abort.
+In this case, you may execute
+<KBD>export SCDBACKUP_NO_SCANBUS=1</KBD>
+and try again.
+<DL>
+<DT></DT>
 <DD><KBD> ------------------- SCSI devices. To be used like &nbsp;&nbsp; 0,0,0</KBD></DD>
 <DD><KBD>&nbsp;&nbsp;&nbsp; 2,0,0 &nbsp;&nbsp; 0)&nbsp; 'TEAC' 'CD-ROM CD-532S' '?' Removable CD-ROM</KBD></DD>
 <DD><KBD> ------------------- end of SCSI device list</KBD></DD>

libburn/trunk/cdrskin/cdrskin_timestamp.h

@@ -1 +1 @@
-#define Cdrskin_timestamP "2006.11.22.122228"
+#define Cdrskin_timestamP "2006.11.23.102340"

libburn/trunk/cdrskin/compile_cdrskin.sh

@@ -7,7 +7,7 @@
 debug_opts=
 def_opts=
 largefile_opts="-D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE=1"
-libvers="-DCdrskin_libburn_0_2_3"
+libvers="-DCdrskin_libburn_0_2_6"
 cleanup_src_or_obj="libburn/cleanup.o"
 libdax_msgs_o="libburn/libdax_msgs.o"
 libdax_audioxtr_o="libburn/libdax_audioxtr.o"
@@ -33,15 +33,15 @@ do
     libdax_audioxtr_o=
     libdax_msgs_o="libburn/message.o"
     cleanup_src_or_obj="-DCleanup_has_no_libburn_os_H cdrskin/cleanup.c"
-  elif test "$i" = "-libburn_0_2_2"
+  elif test "$i" = "-libburn_0_2_6"
   then
-    libvers="-DCdrskin_libburn_0_2_2"
+    libvers="-DCdrskin_libburn_0_2_6"
-    libdax_audioxtr_o=
+    libdax_audioxtr_o="libburn/libdax_audioxtr.o"
-    libdax_msgs_o="libburn/message.o"
+    libdax_msgs_o="libburn/libdax_msgs.o"
-    cleanup_src_or_obj="-DCleanup_has_no_libburn_os_H cdrskin/cleanup.c"
+    cleanup_src_or_obj="libburn/cleanup.o"
-  elif test "$i" = "-libburn_0_2_3"
+  elif test "$i" = "-libburn_svn"
   then
-    libvers="-DCdrskin_libburn_0_2_3"
+    libvers="-DCdrskin_libburn_0_2_6"
     libdax_audioxtr_o="libburn/libdax_audioxtr.o"
     libdax_msgs_o="libburn/libdax_msgs.o"
     cleanup_src_or_obj="libburn/cleanup.o"
@@ -79,8 +79,8 @@ do
     echo "  -compile_cdrfifo  compile program cdrskin/cdrfifo."
     echo "  -compile_dewav    compile program test/dewav without libburn."
     echo "  -cvs_A60220       set macro to match libburn-CVS of 20 Feb 2006."
-    echo "  -libburn_0_2_2    set macro to match libburn-0.2.2."
+    echo "  -libburn_0_2_6    set macro to match libburn-0.2.6."
-    echo "  -libburn_0_2_3    set macro to match current libburn-SVN."
+    echo "  -libburn_svn      set macro to match current libburn-SVN."
     echo "  -no_largefile     do not use 64 bit off_t (must match libburn)."
     echo "  -do_not_compile_cdrskin  omit compilation of cdrskin/cdrskin."
     echo "  -experimental     use newly introduced libburn features."

libburn/trunk/cdrskin/wiki_plain.txt

@@ -2,7 +2,7 @@
                        cdrskin Wiki - plain text copy
 --------------------------------------------------------------------------
 
-cdrskin-0.2.5 is the cdrecord compatibility middleware of libburn.
+cdrskin is the cdrecord compatibility middleware of libburn.
 
 Its paragon, cdrecord, is a powerful GPL'ed burn program included in Joerg
 Schilling's cdrtools. cdrskin strives to be a second source for the services
@@ -19,10 +19,9 @@ About libburn API for burning CD: http://libburn-api.pykix.org
 
 --------------------------------------------------------------------------
 
-Convenient TAO burn mode is provided in development version 0.2.5 but not in
+Appending sessions to an unclosed CD is restricted to write mode TAO.
-current "stable" release 0.2.4. The same is true for multi-session, where
+(Users who have a burner which succeeds with a follow-up session via
-follow-up sessions must be done in TAO mode. (Users who have a burner which
+ cdrecord -sao : please contact us.)
-succeeds with a follow-up session via cdrecord -sao : please contact us.)
 
 cdrskin does not provide DVD burning yet. See advise to use dvd+rw-tools
 at the end of this text.
@@ -135,8 +134,8 @@ tao_to_sao_tsize=<num> allows the - actually unsupported - cdrecord option
 -tao and defines a default track size to be used if - as custom with -tao -
 no option tsize=# is given.
 
-Since -tao is supported in cdrskin-0.2.5 the TAO-to-SAO workaround on its way
+Since -tao is supported in cdrskin-0.2.6 the TAO-to-SAO workaround has become
-to obsolescence. Nevertheless, tao_to_sao_tsize= allows to preset a default
+quite obsolete. Nevertheless, tao_to_sao_tsize= allows to preset a default
 size for SAO mode which is in effect only if no track size is available.
 
 As in general with cdrskin tsize=# the data source does not have to provide