Homepage of


cdrskin


Limited cdrecord compatibility wrapper for libburn

Purpose:


Hardware requirements:

A CD recorder suitable for libburn.pykix.org (SCSI or IDE/ATAPI writers compliant to mmc standard).

Software requirements :

Linux kernel 2.4 or higher
With kernel 2.4 the drive has to be under ide-scsi emulation.
With kernel 2.6 the drive should not be under ide-scsi.
libpthread
is supposed to be a standard system component.

GPL software included:

libburn-0.2.6
(by Derek Foreman, Ben Jansens, and team of libburn.pykix.org)
transfers data to CD

This program system has been tested on Intel/AMD Linux systems only.
Ports to other usable systems are appreciated. Reports are welcome.


Special features:

Commands:

The goal is to provide some of cdrecord's options in a compatible way. This has been achieved quite sufficiently for the needs of backup tool scdbackup and for data CD projects of K3b (see examples). Suitability for audio CD frontends has been improved much and is now being evaluated.
Further enhancements depend on people who can describe and discuss their wishes as well as on the development of libburn.


Get an overview of drives:
$ cdrskin -scanbus
$ cdrskin dev=ATA -scanbus
$ cdrskin --devices
Get info about a particular drive or loaded media:
$ cdrskin dev=0,1,0 -checkdrive
$ cdrskin dev=ATA:1,0,0 -atip
$ cdrskin dev=/dev/hdc -toc
Make used CD-RW writable again:
$ cdrskin -v dev=/dev/sg1 blank=all -eject
$ cdrskin -v dev=/dev/dvd blank=fast -eject
Write ISO-9660 filesystem image:
$ cdrskin -v dev=/dev/hdc speed=12 fs=8m driveropts=burnfree -sao -eject padsize=300k my_image.iso
Write compressed afio archive on-the-fly :
$ find . | afio -oZ - | cdrskin -v dev=0,1,0 fs=32m speed=8 driveropts=burnfree padsize=300k -tao -
Write audio tracks:
$ cdrskin -v dev=ATA:1,0,0 speed=48 driveropts=burnfree -sao track1.wav track2.au -audio -swab track3.raw

cdrskin -help
reports the cdrecord compatible options
cdrskin --help
reports the non-cdrecord options
man cdrecord
documents the standard for which cdrskin is striving. Do not bother Joerg Schilling with any cdrskin problems. (Be cursed if you install cdrskin as "cdrecord" without clearly forwarding this "don't bother Joerg" demand.)

Known deficiencies:


Download as source code (see README):
cdrskin-0.2.6.pl02.tar.gz (510 KB).
(Most recent patch: backported man page from cdrskin-0.2.7)
The "stable" cdrskin tarballs are source code identical with "stable" libburn releases or with "stabilized" libburn SVN snapshots. They get produced via a different procedure, though.
cdrskin is part of libburn - full libburn is provided with cdrskin releases.
 
Download as single x86 binaries (untar and move to /usr/bin/cdrskin):
cdrskin_0.2.6.pl01-x86-suse9_0.tar.gz, (60 KB),
runs on SuSE 9.0 (2.4.21) , RIP-14.4 (2.6.14) , Gentoo (2.6.15 x86_64 Athlon).
cdrskin_0.2.6.pl01-x86-suse9_0-static.tar.gz, (260 KB), -static compiled,
runs on SuSE 7.2 (2.4.4), and on the systems above.
Documentation:
README a short introduction
cdrskin --help non-cdrecord options
cdrskin -help cdrecord compatible options
 
Contact:
Thomas Schmitt, scdbackup@gmx.net
License:
GPL, an Open Source approved license
 


Enhancements towards previous stable version cdrskin-0.2.4:


Development snapshot, version 0.2.7 :

Enhancements towards stable version 0.2.6: (none yet)
 
README 0.2.7
cdrskin_0.2.7 --help
cdrskin_0.2.7 -help
 
Maintainers of cdrskin unstable packages please use SVN of libburn.pykix.org
Download: svn co http://libburn-svn.pykix.org/libburn/trunk libburn_pykix
Build: cd libburn_pykix ; ./bootstrap ; ./configure ; make
Build of SVN versions needs autotools of at least version 1.7 installed. But after the run of ./bootstrap, only vanilla tools like make and gcc are needed.
 
The following downloads are intended for adventurous end users or admins with full system souvereignty.
Source (./bootstrap is already applied, build tested, for more see above upcoming README ):
cdrskin-0.2.7.tar.gz (500 KB).
Binary (untar and move to /usr/bin/cdrskin):
cdrskin_0.2.7-x86-suse9_0.tar.gz, (60 KB).
cdrskin_0.2.7-x86-suse9_0-static.tar.gz, (260 KB)


Many thanks to Joerg Schilling for cdrecord,
and to Derek Foreman and Ben Jansens for creating libburn.
Historic versions based on Derek's and Ben's icculus.org/burn :
cdrskin-0.1.2.0.2.ts.tar.gz
cdrskin-0.1.3.0.2.ts.tar.gz


Example for a setup of device permissions. To be done by the superuser:
(CD devices which offer no r-permission are invisible to normal users.)
(CD devices which offer no w-permission are not useable.)
# cdrskin --devices
...
0  dev='/dev/sg0'  rwrwr- :  'TEAC' 'CD-ROM CD-532S'
1  dev='/dev/hdc'  rwrw-- :  'LITE-ON' 'LTR-48125S'
# chmod a+rw /dev/sg0 /dev/hdc


Example how to setup K3b to use cdrskin for burning data CD projects.
(
K3b is a GUI frontend which uses cdrecord for CD burning.)


Example for a test session with a cdrecord based scdbackup installation:
$ cdrskin -scanbus
...
    2,0,0    0)  'TEAC' 'CD-ROM CD-532S' '?' Removable CD-ROM
$ cdrskin -scanbus dev=ATA
...
    1,0,0    1)  'LITE-ON' 'LTR-48125S' '?' Removable CD-ROM
$ export SCDBACKUP_SCSI_ADR="ATA:1,0,0"
$ export SCDBACKUP_CDRECORD="cdrskin -v -v tao_to_sao_tsize=650m"
$ scdbackup_home
Example for a permanent configuration of cdrskin based scdbackup
$ cd scdbackup-0.8.6/inst
$ export SCDBACKUP_USE_CDRSKIN=1
$ ./CONFIGURE_CD
...
cdrskin 0.2.6 : limited cdrecord compatibility wrapper for libburn
If your system is stricken with some ill CD device then this can stall and you will have to press Ctrl+C to abort. In this case, you may execute export SCDBACKUP_NO_SCANBUS=1 and try again.
------------------- SCSI devices. To be used like    0,0,0
    2,0,0    0)  'TEAC' 'CD-ROM CD-532S' '?' Removable CD-ROM
------------------- end of SCSI device list
------------------- ATA devices. To be used like ATA:0,0,0
    1,0,0    1)  'LITE-ON' 'LTR-48125S' '?' Removable CD-ROM
...
    * Your cdrecord offers -driveropts=burnfree with your recorder.
...
scdbackup for CD 0.8.6 : First stage of installation done.
...
Now give it a try. Run : scdbackup_home
$ unset SCDBACKUP_USE_CDRSKIN
To get back to using cdrecord :
$ cd scdbackup-0.8.6/inst
$ export SCDBACKUP_USE_CDRSKIN=0
$ ./CONFIGURE_CD
...
$ unset SCDBACKUP_USE_CDRSKIN


About the relationship of cdrecord and cdrskin

First of all: this relationship is single sided, as cdrskin has to be aware of cdrecord but not vice versa.

I am a long time user of cdrecord and it works fine for me. Especially i do appreciate its write mode -tao which allows to pipe arbitrary data on CD and CD-RW via stdin. cdrecord is reliable, versatile and well maintained. So for me - there would be not problem with it.
But the author of cdrecord and the Linux kernel people foster a very hostile relationship. Ok, that's their business, not mine (or ours if you are with me). One has to be aware, though, that this relationship might lead to a situation where cdrecord is no longer available for certain Linux kernels.
To have my own project prepared for such a time, i began to implement its cdrecord gestures on top of libburn. From now on i invite other interested users of cdrecord to teach cdrskin the gestures necessary for their cdrecord applications. Contact me. Let's see what we can achieve.

I am aware that libburn and cdrskin still have way to go until you can simply install cdrskin as cdrecord and may expect any application to run with it. Currently i do not encourage this approach, but of course such a replacement opportunity is the long term goal of a cdrecord compatibility wrapper.

It is very important to me that this project is not perceived as hostile towards Joerg Schilling and his ongoing work. I owe him much. For cdrecord, for mkisofs, for star. Chapeau.


Enjoying free Open Source hosting by www.webframe.org
100 % Microsoft free
and by sourceforge.net
SourceForge Logo

Links to my other published software projects :
scdbackup, multi volume CD backup
(a second source of above)
Some Tools for Image Collectors
(a second source of above)
pppoem, a DSL throughput monitor (mainly for Linux kernel 2.4)


Legal statement: This website does not serve any commercial purpose.