libburnia/legacy
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
0553687bff
legacy/trunk/libburn/sg-freebsd.c

490 lines
12 KiB
C
Raw Blame History

/* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */
#include <assert.h>
#include <errno.h>
#include <unistd.h>
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <stdlib.h>
#include <string.h>
#include <sys/poll.h>
#include <camlib.h>
#include <cam/scsi/scsi_message.h>
#include <cam/scsi/scsi_pass.h>
#include <err.h> /* XXX */
#include "transport.h"
#include "drive.h"
#include "sg.h"
#include "spc.h"
#include "mmc.h"
#include "sbc.h"
#include "debug.h"
#include "toc.h"
#include "util.h"
#include "libdax_msgs.h"
extern struct libdax_msgs *libdax_messenger;
static void enumerate_common(char *fname, int bus_no, int host_no,
int channel_no, int target_no, int lun_no);
/* ts A51221 */
int burn_drive_is_banned(char *device_address);
/* ts A60813 : storage objects are in libburn/init.c
wether to use O_EXCL
wether to use O_NOBLOCK with open(2) on devices
wether to take O_EXCL rejection as fatal error */
extern int burn_sg_open_o_excl;
extern int burn_sg_open_o_nonblock;
extern int burn_sg_open_abort_busy;
/* ts A60821
<<< debug: for tracing calls which might use open drive fds */
int mmc_function_spy(char * text);
/** Returns the next index number and the next enumerated drive address.
@param idx An opaque handle. Make no own theories about it.
@param adr Takes the reply
@param adr_size Gives maximum size of reply including final 0
@param initialize 1 = start new,
0 = continue, use no other values for now
-1 = finish
@return 1 = reply is a valid address , 0 = no further address available
-1 = severe error (e.g. adr_size too small)
*/
int sg_give_next_adr(burn_drive_enumerator_t *idx,
char adr[], int adr_size, int initialize)
{
return (0);
}
int sg_is_enumerable_adr(char* adr)
{
return (0);
}
int sg_obtain_scsi_adr(char *path, int *bus_no, int *host_no, int *channel_no,
int *target_no, int *lun_no)
{
return (0);
}
int sg_close_drive(struct burn_drive * d)
{
if (d->cam != NULL) {
cam_close_device(d->cam);
d->cam = NULL;
}
return 0;
}
void ata_enumerate(void)
{
/* Do not supported */
}
void sg_enumerate(void)
{
union ccb ccb;
int bufsize, fd;
unsigned int i;
int skip_device = 0;
if ((fd = open(XPT_DEVICE, O_RDWR)) == -1) {
warn("couldn't open %s", XPT_DEVICE);
return;
}
bzero(&ccb, sizeof(union ccb));
ccb.ccb_h.path_id = CAM_XPT_PATH_ID;
ccb.ccb_h.target_id = CAM_TARGET_WILDCARD;
ccb.ccb_h.target_lun = CAM_LUN_WILDCARD;
ccb.ccb_h.func_code = XPT_DEV_MATCH;
bufsize = sizeof(struct dev_match_result) * 100;
ccb.cdm.match_buf_len = bufsize;
ccb.cdm.matches = (struct dev_match_result *)malloc(bufsize);
if (ccb.cdm.matches == NULL) {
warnx("can't malloc memory for matches");
close(fd);
return;
}
ccb.cdm.num_matches = 0;
/*
* We fetch all nodes, since we display most of them in the default
* case, and all in the verbose case.
*/
ccb.cdm.num_patterns = 0;
ccb.cdm.pattern_buf_len = 0;
/*
* We do the ioctl multiple times if necessary, in case there are
* more than 100 nodes in the EDT.
*/
do {
if (ioctl(fd, CAMIOCOMMAND, &ccb) == -1) {
warn("error sending CAMIOCOMMAND ioctl");
break;
}
if ((ccb.ccb_h.status != CAM_REQ_CMP)
|| ((ccb.cdm.status != CAM_DEV_MATCH_LAST)
&& (ccb.cdm.status != CAM_DEV_MATCH_MORE))) {
warnx("got CAM error %#x, CDM error %d\n",
ccb.ccb_h.status, ccb.cdm.status);
break;
}
for (i = 0; i < ccb.cdm.num_matches; i++) {
switch (ccb.cdm.matches[i].type) {
case DEV_MATCH_BUS:
break;
case DEV_MATCH_DEVICE: {
struct device_match_result* result;
result = &ccb.cdm.matches[i].result.device_result;
if (result->flags & DEV_RESULT_UNCONFIGURED)
skip_device = 1;
else
skip_device = 0;
break;
}
case DEV_MATCH_PERIPH: {
struct periph_match_result* result;
char buf[64];
result = &ccb.cdm.matches[i].result.periph_result;
if (skip_device || strcmp(result->periph_name, "pass") == 0)
break;
snprintf(buf, sizeof (buf), "/dev/%s%d", result->periph_name, result->unit_number);
/* ts A51221 */
if (burn_drive_is_banned(buf))
break;
enumerate_common(buf, result->path_id, result->path_id, 0,
result->target_id, result->target_lun);
break;
}
default:
fprintf(stdout, "unknown match type\n");
break;
}
}
} while ((ccb.ccb_h.status == CAM_REQ_CMP)
&& (ccb.cdm.status == CAM_DEV_MATCH_MORE));
close(fd);
}
static void enumerate_common(char *fname, int bus_no, int host_no,
int channel_no, int target_no, int lun_no)
{
struct burn_drive *t;
struct burn_drive out;
/* ts A60923 */
out.bus_no = bus_no;
out.host = host_no;
out.id = target_no;
out.channel = channel_no;
out.lun = lun_no;
out.devname = burn_strdup(fname);
out.cam = NULL;
out.start_lba= -2000000000;
out.end_lba= -2000000000;
out.read_atip = mmc_read_atip;
out.grab = sg_grab;
out.release = sg_release;
out.issue_command = sg_issue_command;
out.getcaps = spc_getcaps;
out.released = 1;
out.status = BURN_DISC_UNREADY;
out.eject = sbc_eject;
out.load = sbc_load;
out.lock = spc_prevent;
out.unlock = spc_allow;
out.read_disc_info = spc_sense_write_params;
out.get_erase_progress = spc_get_erase_progress;
out.test_unit_ready = spc_test_unit_ready;
out.probe_write_modes = spc_probe_write_modes;
out.read_toc = mmc_read_toc;
out.write = mmc_write;
out.erase = mmc_erase;
out.read_sectors = mmc_read_sectors;
out.perform_opc = mmc_perform_opc;
out.set_speed = mmc_set_speed;
out.send_parameters = spc_select_error_params;
out.send_write_parameters = spc_select_write_params;
out.send_cue_sheet = mmc_send_cue_sheet;
out.sync_cache = mmc_sync_cache;
out.get_nwa = mmc_get_nwa;
out.close_disc = mmc_close_disc;
out.close_session = mmc_close_session;
out.idata = malloc(sizeof(struct burn_scsi_inquiry_data));
out.idata->valid = 0;
out.mdata = malloc(sizeof(struct scsi_mode_data));
out.mdata->valid = 0;
if (out.idata == NULL || out.mdata == NULL) {
libdax_msgs_submit(libdax_messenger, -1, 0x00020108,
LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
"Could not allocate new drive object", 0, 0);
return;
}
memset(&out.params, 0, sizeof(struct params));
t = burn_drive_register(&out);
/* ts A60821
<<< debug: for tracing calls which might use open drive fds */
mmc_function_spy("enumerate_common : -------- doing grab");
/* try to get the drive info */
if (t->grab(t)) {
burn_print(2, "getting drive info\n");
t->getcaps(t);
t->unlock(t);
t->released = 1;
} else {
burn_print(2, "unable to grab new located drive\n");
}
/* ts A60821
<<< debug: for tracing calls which might use open drive fds */
mmc_function_spy("enumerate_common : ----- would release ");
}
/*
we use the sg reference count to decide whether we can use the
drive or not.
if refcount is not one, drive is open somewhere else.
*/
int sg_grab(struct burn_drive *d)
{
int count;
struct cam_device *cam;
mmc_function_spy("sg_grab");
assert(d->cam == NULL);
cam = cam_open_device(d->devname, O_RDWR);
if (cam == NULL) {
libdax_msgs_submit(libdax_messenger, d->global_index, 0x00020003,
LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
"Could not grab drive", 0/*os_errno*/, 0);
return 0;
}
/* er = ioctl(fd, SG_GET_ACCESS_COUNT, &count);*/
count = 1;
if (1 == count) {
d->cam = cam;
fcntl(cam->fd, F_SETOWN, getpid());
d->released = 0;
return 1;
}
burn_print(1, "could not acquire drive - already open\n");
sg_close_drive(d);
return 0;
}
/*
non zero return means you still have the drive and it's not
in a state to be released? (is that even possible?)
*/
int sg_release(struct burn_drive *d)
{
mmc_function_spy("sg_release");
if (d->cam == NULL) {
burn_print(1, "release an ungrabbed drive. die\n");
return 0;
}
mmc_function_spy("sg_release ----------- closing.");
sg_close_drive(d);
return 0;
}
int sg_issue_command(struct burn_drive *d, struct command *c)
{
int done = 0;
int err;
union ccb *ccb;
char buf[161];
snprintf(buf, sizeof (buf), "sg_issue_command d->cam=%p d->released=%d",
(void*)d->cam, d->released);
mmc_function_spy(buf);
if (d->cam == NULL) {
c->error = 0;
return 0;
}
c->error = 0;
ccb = cam_getccb(d->cam);
cam_fill_csio(&ccb->csio,
1, /* retries */
NULL, /* cbfncp */
CAM_DEV_QFRZDIS, /* flags */
MSG_SIMPLE_Q_TAG, /* tag_action */
NULL, /* data_ptr */
0, /* dxfer_len */
sizeof (ccb->csio.sense_data), /* sense_len */
0, /* cdb_len */
30*1000); /* timeout */
switch (c->dir) {
case TO_DRIVE:
ccb->csio.ccb_h.flags |= CAM_DIR_OUT;
break;
case FROM_DRIVE:
ccb->csio.ccb_h.flags |= CAM_DIR_IN;
break;
case NO_TRANSFER:
ccb->csio.ccb_h.flags |= CAM_DIR_NONE;
break;
}
ccb->csio.cdb_len = c->oplen;
memcpy(&ccb->csio.cdb_io.cdb_bytes, &c->opcode, c->oplen);
memset(&ccb->csio.sense_data, 0, sizeof (ccb->csio.sense_data));
if (c->page) {
ccb->csio.data_ptr = c->page->data;
if (c->dir == FROM_DRIVE) {
ccb->csio.dxfer_len = BUFFER_SIZE;
/* touch page so we can use valgrind */
memset(c->page->data, 0, BUFFER_SIZE);
} else {
assert(c->page->bytes > 0);
ccb->csio.dxfer_len = c->page->bytes;
}
} else {
ccb->csio.data_ptr = NULL;
ccb->csio.dxfer_len = 0;
}
do {
err = cam_send_ccb(d->cam, ccb);
if (err == -1) {
libdax_msgs_submit(libdax_messenger,
d->global_index, 0x0002010c,
LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
"Failed to transfer command to drive",
errno, 0);
cam_freeccb(ccb);
sg_close_drive(d);
d->released = 1;
d->busy = BURN_DRIVE_IDLE;
c->error = 1;
return -1;
}
/* XXX */
memcpy(c->sense, &ccb->csio.sense_data, ccb->csio.sense_len);
if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
if (!c->retry) {
c->error = 1;
cam_freeccb(ccb);
return 1;
}
switch (scsi_error(d, c->sense, 0)) {
case RETRY:
done = 0;
break;
case FAIL:
done = 1;
c->error = 1;
break;
}
} else {
done = 1;
}
} while (!done);
cam_freeccb(ccb);
return 1;
}
enum response scsi_error(struct burn_drive *d, unsigned char *sense,
int senselen)
{
int key, asc, ascq;
senselen = senselen;
key = sense[2];
asc = sense[12];
ascq = sense[13];
burn_print(12, "CONDITION: 0x%x 0x%x 0x%x on %s %s\n",
key, asc, ascq, d->idata->vendor, d->idata->product);
switch (asc) {
case 0:
burn_print(12, "NO ERROR!\n");
return RETRY;
case 2:
burn_print(1, "not ready\n");
return RETRY;
case 4:
burn_print(1,
"logical unit is in the process of becoming ready\n");
return RETRY;
case 0x20:
if (key == 5)
burn_print(1, "bad opcode\n");
return FAIL;
case 0x21:
burn_print(1, "invalid address or something\n");
return FAIL;
case 0x24:
if (key == 5)
burn_print(1, "invalid field in cdb\n");
else
break;
return FAIL;
case 0x26:
if (key == 5)
burn_print( 1, "invalid field in parameter list\n" );
return FAIL;
case 0x28:
if (key == 6)
burn_print(1,
"Not ready to ready change, medium may have changed\n");
else
break;
return RETRY;
case 0x3A:
burn_print(12, "Medium not present in %s %s\n",
d->idata->vendor, d->idata->product);
d->status = BURN_DISC_EMPTY;
return FAIL;
}
burn_print(1, "unknown failure\n");
burn_print(1, "key:0x%x, asc:0x%x, ascq:0x%x\n", key, asc, ascq);
return FAIL;
}
Reference in New Issue View Git Blame Copy Permalink