legacy/libburn/trunk/libburn/write.c

2731 lines
72 KiB
C

/* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */
/* Copyright (c) 2004 - 2006 Derek Foreman, Ben Jansens
Copyright (c) 2006 - 2010 Thomas Schmitt <scdbackup@gmx.net>
Provided under GPL version 2 or later.
*/
#ifdef HAVE_CONFIG_H
#include "../config.h"
#endif
#include <unistd.h>
#include <signal.h>
/* ts A61009 */
/* #include <a ssert.h> */
/* ts A61106 : Deliberate defect provocation macros
DO NOT DEFINE THESE IF YOU WANT SUCCESSFUL TAO !
#define Libburn_experimental_no_close_tracK 1
#define Libburn_experimental_no_close_sessioN 1
*/
/* ts A61114 : Highly experimental : try to achieve SAO on appendables
THIS DOES NOT WORK YET !
#define Libburn_sao_can_appenD 1
*/
#include <sys/types.h>
#include <stdio.h>
#include <string.h>
#include <ctype.h>
#include <stdlib.h>
#include <fcntl.h>
#include <errno.h>
#include <sys/stat.h>
#include <sys/time.h>
#include "error.h"
#include "sector.h"
#include "libburn.h"
#include "drive.h"
#include "transport.h"
#include "debug.h"
#include "init.h"
#include "toc.h"
#include "util.h"
#include "sg.h"
#include "write.h"
#include "options.h"
#include "structure.h"
#include "source.h"
#include "mmc.h"
#include "spc.h"
#include "libdax_msgs.h"
extern struct libdax_msgs *libdax_messenger;
/* ts A91120 : <<< experimental */
#ifdef Libburn_mmap_write_buffeR
#include <sys/mman.h>
#endif
/* The maximum output size to be used with CD media. This is also curbed
by BURN_OS_TRANSPORT_BUFFER_SIZE. The smaller number gets into effect.
*/
#define Libburn_cd_obS (32 * 1024)
/* The size to be used with DVD media.
*/
#define Libburn_dvd_obS (32 * 1024)
/* The size to be used with BD-RE media in normal, not streamed mode.
*/
#define Libburn_bd_re_obS (32 * 1024)
/* The size to be used with BD-RE media in streamed mode.
*/
#define Libburn_bd_re_streamed_obS (64 * 1024)
static int type_to_ctrl(int mode)
{
int ctrl = 0;
int data = BURN_MODE2 | BURN_MODE1 | BURN_MODE0;
if (mode & data) {
ctrl |= 4;
} else if (mode & BURN_AUDIO) {
if (mode & BURN_4CH)
ctrl |= 8;
if (mode & BURN_PREEMPHASIS)
ctrl |= 1;
} else
/* ts A61008 */
/* a ssert(0); */
return -1;
if (mode & BURN_COPY)
ctrl |= 2;
return ctrl;
}
/* only the ctrl nibble is set here (not adr) */
/* ts A61009 : removed "static" , reacted on type_to_ctrl() == -1
preserved ignorance towards unknown modes (for now) */
void type_to_form(int mode, unsigned char *ctladr, int *form)
{
int ret;
ret = type_to_ctrl(mode) << 4;
if (ret == -1) {
*ctladr = 0xff;
*form = -1;
return;
}
*ctladr = ret;
if (mode & BURN_AUDIO)
*form = 0;
if (mode & BURN_MODE0) {
/* ts A61009 */
/* a ssert(0); */
*form = -1;
return;
}
if (mode & BURN_MODE1)
*form = 0x10;
if (mode & BURN_MODE2) {
/* ts A61009 */
/* a ssert(0); */ /* XXX someone's gonna want this sometime */
*form = -1;
return;
}
if (mode & BURN_MODE_RAW)
*form = 0;
if (mode & BURN_SUBCODE_P16) /* must be expanded to R96 */
*form |= 0x40;
if (mode & BURN_SUBCODE_P96)
*form |= 0xC0;
if (mode & BURN_SUBCODE_R96)
*form |= 0x40;
}
/* ts A71002 : outsourced from burn_write_flush() : no sync cache here */
int burn_write_flush_buffer(struct burn_write_opts *o,struct burn_track *track)
{
struct burn_drive *d = o->drive;
if (d->buffer->bytes && !d->cancel) {
int err;
err = d->write(d, d->nwa, d->buffer);
if (err == BE_CANCELLED)
return 0;
/* A61101 */
if(track != NULL) {
track->writecount += d->buffer->bytes;
track->written_sectors += d->buffer->sectors;
}
/* ts A61119 */
d->progress.buffered_bytes += d->buffer->bytes;
d->nwa += d->buffer->sectors;
d->buffer->bytes = 0;
d->buffer->sectors = 0;
}
return 1;
}
int burn_write_flush(struct burn_write_opts *o, struct burn_track *track)
{
int ret;
struct burn_drive *d = o->drive;
ret = burn_write_flush_buffer(o, track);
if (ret <= 0)
return ret;
d->sync_cache(d);
return 1;
}
/* ts A71002 : outsourced from burn_write_close_track() */
int burn_write_track_minsize(struct burn_write_opts *o, struct burn_session *s,
int tnum)
{
char msg[81];
struct burn_drive *d;
struct burn_track *t;
int todo, step, cancelled, seclen;
d = o->drive;
t = s->track[tnum];
/* ts A61103 : pad up track to minimum size of 600 sectors */
if (t->written_sectors < 300) {
todo = 300 - t->written_sectors;
sprintf(msg,"Padding up track to minimum size (+ %d sectors)",
todo);
libdax_msgs_submit(libdax_messenger, o->drive->global_index,
0x0002011a,
LIBDAX_MSGS_SEV_NOTE, LIBDAX_MSGS_PRIO_HIGH, msg,0,0);
step = BUFFER_SIZE / 4096; /* shall fit any sector size */
if (step <= 0)
step = 1;
seclen = burn_sector_length(t->mode);
if (seclen <= 0)
seclen = 2048;
memset(d->buffer, 0, sizeof(struct buffer));
cancelled = d->cancel;
for (; todo > 0; todo -= step) {
if (step > todo)
step = todo;
d->buffer->bytes = step*seclen;
d->buffer->sectors = step;
d->cancel = 0;
d->write(d, d->nwa, d->buffer);
d->nwa += d->buffer->sectors;
t->writecount += d->buffer->bytes;
t->written_sectors += d->buffer->sectors;
d->progress.buffered_bytes += d->buffer->bytes;
}
d->cancel = cancelled;
}
return 1;
}
/* ts A61030 */
int burn_write_close_track(struct burn_write_opts *o, struct burn_session *s,
int tnum)
{
char msg[81];
struct burn_drive *d;
struct burn_track *t;
/* ts A61106 */
#ifdef Libburn_experimental_no_close_tracK
return 1;
#endif
d = o->drive;
t = s->track[tnum];
d->busy = BURN_DRIVE_CLOSING_TRACK;
sprintf(msg, "Closing track %2.2d", tnum+1);
libdax_msgs_submit(libdax_messenger, o->drive->global_index,0x00020119,
LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_HIGH, msg,0,0);
/* MMC-1 mentions track number 0xFF for "the incomplete track",
MMC-3 does not. I tried both. 0xFF was in effect when other
bugs finally gave up and made way for readable tracks. */
/* ts A70129
Probably the right value for appendables is d->last_track_no
*/
d->close_track_session(o->drive, 0, 0xff);
d->busy = BURN_DRIVE_WRITING;
return 1;
}
/* ts A61030 */
int burn_write_close_session(struct burn_write_opts *o, struct burn_session *s)
{
/* ts A61106 */
#ifdef Libburn_experimental_no_close_sessioN
return 1;
#endif
libdax_msgs_submit(libdax_messenger, o->drive->global_index,0x00020119,
LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_HIGH,
"Closing session", 0, 0);
/* ts A61102 */
o->drive->busy = BURN_DRIVE_CLOSING_SESSION;
o->drive->close_track_session(o->drive, 1, 0);
/* ts A61102 */
o->drive->busy = BURN_DRIVE_WRITING;
return 1;
}
/* ts A60819:
This is unused since about Feb 2006, icculus.org/burn CVS.
The compiler complains. We shall please our compiler.
*/
#ifdef Libburn_write_with_function_print_cuE
static void print_cue(struct cue_sheet *sheet)
{
int i;
unsigned char *unit;
printf("\n");
printf("ctladr|trno|indx|form|scms| msf\n");
printf("------+----+----+----+----+--------\n");
for (i = 0; i < sheet->count; i++) {
unit = sheet->data + 8 * i;
printf(" %1X %1X | %02X | %02X | %02X | %02X |",
(unit[0] & 0xf0) >> 4, unit[0] & 0xf, unit[1], unit[2],
unit[3], unit[4]);
printf("%02X:%02X:%02X\n", unit[5], unit[6], unit[7]);
}
}
#endif /* Libburn_write_with_print_cuE */
/* ts A61009 : changed type from void to int */
/** @return 1 = success , <=0 failure */
static int add_cue(struct cue_sheet *sheet, unsigned char ctladr,
unsigned char tno, unsigned char indx,
unsigned char form, unsigned char scms, int lba)
{
unsigned char *unit;
unsigned char *ptr;
int m, s, f;
burn_lba_to_msf(lba, &m, &s, &f);
sheet->count++;
ptr = realloc(sheet->data, sheet->count * 8);
/* ts A61009 */
/* a ssert(ptr); */
if (ptr == NULL) {
libdax_msgs_submit(libdax_messenger, -1, 0x00020111,
LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
"Could not allocate new auxiliary object (cue_sheet->data)",
0, 0);
return -1;
}
sheet->data = ptr;
unit = sheet->data + (sheet->count - 1) * 8;
unit[0] = ctladr;
unit[1] = tno;
unit[2] = indx;
unit[3] = form;
unit[4] = scms;
unit[5] = m;
unit[6] = s;
unit[7] = f;
return 1;
}
/* ts A61114: added parameter nwa */
struct cue_sheet *burn_create_toc_entries(struct burn_write_opts *o,
struct burn_session *session,
int nwa)
{
int i, m, s, f, form, pform, runtime = -150, ret, track_length;
unsigned char ctladr;
struct burn_drive *d;
struct burn_toc_entry *e;
struct cue_sheet *sheet;
struct burn_track **tar = session->track;
int ntr = session->tracks;
int rem = 0;
d = o->drive;
#ifdef Libburn_sao_can_appenD
if (d->status == BURN_DISC_APPENDABLE)
runtime = nwa-150;
#endif
sheet = calloc(1, sizeof(struct cue_sheet));
/* ts A61009 : react on failures of calloc(), add_cue_sheet()
type_to_form() */
if (sheet == NULL) {
libdax_msgs_submit(libdax_messenger, -1, 0x00020111,
LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
"Could not allocate new auxiliary object (cue_sheet)",
0, 0);
return NULL;
}
sheet->data = NULL;
sheet->count = 0;
type_to_form(tar[0]->mode, &ctladr, &form);
if (form == -1) {
libdax_msgs_submit(libdax_messenger, -1, 0x00020116,
LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
"Track mode has unusable value", 0, 0);
goto failed;
}
ret = add_cue(sheet, ctladr | 1, 0, 0, 1, 0, runtime);
if (ret <= 0)
goto failed;
ret = add_cue(sheet, ctladr | 1, 1, 0, form, 0, runtime);
if (ret <= 0)
goto failed;
runtime += 150;
burn_print(1, "toc for %d tracks:\n", ntr);
d->toc_entries = ntr + 3;
/* ts A61009 */
/* a ssert(d->toc_entry == NULL); */
if (d->toc_entry != NULL) {
/* ts A61109 : this happens with appendable CDs
>>> Open question: is the existing TOC needed ? */
/* ts A61109 : for non-SAO, this sheet is thrown away later */
free((char *) d->toc_entry);
/*
libdax_msgs_submit(libdax_messenger,
d->global_index, 0x00020117,
LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
"toc_entry of drive is already in use", 0, 0);
goto failed;
*/
}
d->toc_entry = calloc(d->toc_entries, sizeof(struct burn_toc_entry));
e = d->toc_entry;
e[0].point = 0xA0;
if (tar[0]->mode & BURN_AUDIO)
e[0].control = TOC_CONTROL_AUDIO;
else
e[0].control = TOC_CONTROL_DATA;
e[0].pmin = 1;
e[0].psec = o->format;
e[0].adr = 1;
e[1].point = 0xA1;
e[1].pmin = ntr;
e[1].adr = 1;
if (tar[ntr - 1]->mode & BURN_AUDIO)
e[1].control = TOC_CONTROL_AUDIO;
else
e[1].control = TOC_CONTROL_DATA;
e[2].point = 0xA2;
e[2].control = e[1].control;
e[2].adr = 1;
/* ts A70121 : The pause before the first track is not a Pre-gap.
To count it as part 2 of a Pre-gap is a dirty hack. It also seems
to have caused confusion in dealing with part 1 of an eventual
real Pre-gap. mmc5r03c.pdf 6.33.3.2, 6.33.3.18 .
*/
tar[0]->pregap2 = 1;
pform = form;
for (i = 0; i < ntr; i++) {
type_to_form(tar[i]->mode, &ctladr, &form);
/* ts A70121 : This seems to be thw wrong test. Correct would
be to compare tar[]->mode or bit2 of ctladr.
*/
if (pform != form) {
ret = add_cue(sheet, ctladr | 1, i + 1, 0, form, 0,
runtime);
if (ret <= 0)
goto failed;
runtime += 150;
/* XXX fix pregap interval 1 for data tracks */
/* ts A60813 silence righteous compiler warning about C++ style comments
This is possibly not a comment but rather a trace of Derek Foreman
experiments. Thus not to be beautified - but to be preserved rectified.
/ / if (!(form & BURN_AUDIO))
/ / tar[i]->pregap1 = 1;
*/
/* ts A70121 : it is unclear why (form & BURN_AUDIO) should prevent pregap1.
I believe, correct would be:
runtime += 75;
tar[i]->pregap1 = 1;
The test for pform != form is wrong anyway.
Next one has to care for Post-gap: table 555 in mmc5r03c.pdf does not
show any although 6.33.3.19 would prescribe some.
Nobody seems to have ever tested this situation, up to now.
It is banned for now in burn_disc_write().
Warning have been placed in libburn.h .
*/
tar[i]->pregap2 = 1;
}
/* XXX HERE IS WHERE WE DO INDICES IN THE CUE SHEET */
/* XXX and we should make sure the gaps conform to ecma-130... */
tar[i]->entry = &e[3 + i];
e[3 + i].point = i + 1;
burn_lba_to_msf(runtime, &m, &s, &f);
e[3 + i].pmin = m;
e[3 + i].psec = s;
e[3 + i].pframe = f;
e[3 + i].adr = 1;
e[3 + i].control = type_to_ctrl(tar[i]->mode);
burn_print(1, "track %d control %d\n", tar[i]->mode,
e[3 + i].control);
ret = add_cue(sheet, ctladr | 1, i + 1, 1, form, 0, runtime);
if (ret <= 0)
goto failed;
/* ts A70125 :
Still not understanding the sense behind linking tracks,
i decided to at least enforce the MMC specs' minimum
track length.
*/
track_length = burn_track_get_sectors(tar[i]);
if (track_length < 300 && !burn_track_is_open_ended(tar[i])) {
track_length = 300;
if (!tar[i]->pad)
tar[i]->pad = 1;
burn_track_set_sectors(tar[i], track_length);
}
runtime += track_length;
/* if we're padding, we'll clear any current shortage.
if we're not, we'll slip toc entries by a sector every time our
shortage is more than a sector
XXX this is untested :)
*/
if (!tar[i]->pad) {
rem += burn_track_get_shortage(tar[i]);
/* ts A61101 : I doubt that linking would yield a
desireable effect. With TAO it is
counterproductive in any way.
*/
if (o->write_type == BURN_WRITE_TAO)
tar[i]->source->next = NULL;
else
if (i +1 != ntr)
tar[i]->source->next = tar[i+1]->source;
} else if (rem) {
rem = 0;
runtime++;
}
if (rem > burn_sector_length(tar[i]->mode)) {
rem -= burn_sector_length(tar[i]->mode);
runtime--;
}
pform = form;
}
burn_lba_to_msf(runtime, &m, &s, &f);
e[2].pmin = m;
e[2].psec = s;
e[2].pframe = f;
burn_print(1, "run time is %d (%d:%d:%d)\n", runtime, m, s, f);
for (i = 0; i < d->toc_entries; i++)
burn_print(1, "point %d (%02d:%02d:%02d)\n",
d->toc_entry[i].point, d->toc_entry[i].pmin,
d->toc_entry[i].psec, d->toc_entry[i].pframe);
ret = add_cue(sheet, ctladr | 1, 0xAA, 1, 1, 0, runtime);
if (ret <= 0)
goto failed;
return sheet;
failed:;
if (sheet != NULL)
free((char *) sheet);
return NULL;
}
int burn_sector_length(int tracktype)
{
if (tracktype & BURN_AUDIO)
return 2352;
if (tracktype & BURN_MODE_RAW)
return 2352;
if (tracktype & BURN_MODE1)
return 2048;
/* ts A61009 */
/* a ssert(0); */
return -1;
}
int burn_subcode_length(int tracktype)
{
if (tracktype & BURN_SUBCODE_P16)
return 16;
if ((tracktype & BURN_SUBCODE_P96) || (tracktype & BURN_SUBCODE_R96))
return 96;
return 0;
}
int burn_write_leadin(struct burn_write_opts *o,
struct burn_session *s, int first)
{
struct burn_drive *d = o->drive;
int count;
d->busy = BURN_DRIVE_WRITING_LEADIN;
burn_print(5, first ? " first leadin\n" : " leadin\n");
if (first)
count = 0 - d->alba - 150;
else
count = 4500;
d->progress.start_sector = d->alba;
d->progress.sectors = count;
d->progress.sector = 0;
while (count != 0) {
if (!sector_toc(o, s->track[0]->mode))
return 0;
count--;
d->progress.sector++;
}
d->busy = BURN_DRIVE_WRITING;
return 1;
}
int burn_write_leadout(struct burn_write_opts *o,
int first, unsigned char control, int mode)
{
struct burn_drive *d = o->drive;
int count;
d->busy = BURN_DRIVE_WRITING_LEADOUT;
d->rlba = -150;
burn_print(5, first ? " first leadout\n" : " leadout\n");
if (first)
count = 6750;
else
count = 2250;
d->progress.start_sector = d->alba;
d->progress.sectors = count;
d->progress.sector = 0;
while (count != 0) {
if (!sector_lout(o, control, mode))
return 0;
count--;
d->progress.sector++;
}
d->busy = BURN_DRIVE_WRITING;
return 1;
}
int burn_write_session(struct burn_write_opts *o, struct burn_session *s)
{
struct burn_drive *d = o->drive;
struct burn_track *prev = NULL, *next = NULL;
int i, ret;
d->rlba = 0;
burn_print(1, " writing a session\n");
for (i = 0; i < s->tracks; i++) {
if (i > 0)
prev = s->track[i - 1];
if (i + 1 < s->tracks)
next = s->track[i + 1];
else
next = NULL;
if (!burn_write_track(o, s, i))
{ ret = 0; goto ex; }
}
/* ts A61103 */
ret = 1;
ex:;
if (o->write_type == BURN_WRITE_TAO)
burn_write_close_session(o, s);
return ret;
}
/* ts A61218 : outsourced from burn_write_track() */
int burn_disc_init_track_status(struct burn_write_opts *o,
struct burn_session *s, int tnum, int sectors)
{
struct burn_drive *d = o->drive;
/* Update progress */
d->progress.start_sector = d->nwa;
d->progress.sectors = sectors;
d->progress.sector = 0;
/* ts A60831: added tnum-line, extended print message on proposal
by bonfire-app@wanadoo.fr in http://libburn.pykix.org/ticket/58 */
d->progress.track = tnum;
/* ts A61102 */
d->busy = BURN_DRIVE_WRITING;
return 1;
}
int burn_write_track(struct burn_write_opts *o, struct burn_session *s,
int tnum)
{
struct burn_track *t = s->track[tnum];
struct burn_drive *d = o->drive;
int i, tmp = 0, open_ended = 0, ret= 0, nwa, lba;
int sectors;
char msg[80];
d->rlba = -150;
/* XXX for tao, we don't want the pregaps but still want post? */
if (o->write_type != BURN_WRITE_TAO) {
/* ts A61102 */
d->busy = BURN_DRIVE_WRITING_PREGAP;
if (t->pregap1)
d->rlba += 75;
if (t->pregap2)
d->rlba += 150;
if (t->pregap1) {
struct burn_track *pt;
/* ts A70121 : Removed pseudo suicidal initializer
= s->track[tnum - 1];
*/
if (tnum == 0) {
/* ts A70121 : This is not possible because
track 1 cannot have a pregap at all.
MMC-5 6.33.3.2 precribes a mandatory pause
prior to any track 1. Pre-gap is prescribed
for mode changes like audio-to-data.
To set burn_track.pregap1 for track 1 is
kindof a dirty hack.
*/
printf("first track should not have a pregap1\n");
pt = t;
} else
pt = s->track[tnum - 1]; /* ts A70121 */
for (i = 0; i < 75; i++)
if (!sector_pregap(o, t->entry->point,
pt->entry->control, pt->mode))
{ ret = 0; goto ex; }
}
if (t->pregap2)
for (i = 0; i < 150; i++)
if (!sector_pregap(o, t->entry->point,
t->entry->control, t->mode))
{ ret = 0; goto ex; }
} else {
o->control = t->entry->control;
d->send_write_parameters(d, o);
/* ts A61103 */
ret = d->get_nwa(d, -1, &lba, &nwa);
/* ts A70213: CD-TAO: eventually expand size of track to max */
burn_track_apply_fillup(t, d->media_capacity_remaining, 0);
/* <<< */
sprintf(msg,
"TAO pre-track %2.2d : get_nwa(%d)=%d, d=%d , demand=%.f , cap=%.f\n",
tnum+1, nwa, ret, d->nwa, (double) burn_track_get_sectors(t) * 2048.0,
(double) d->media_capacity_remaining);
libdax_msgs_submit(libdax_messenger, d->global_index, 0x000002,
LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_ZERO,
msg, 0, 0);
/* ts A91003 */
if (nwa < d->nwa) {
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020173,
LIBDAX_MSGS_SEV_FAILURE, LIBDAX_MSGS_PRIO_HIGH,
"Drive tells NWA smaller than last written address",
0, 0);
d->sync_cache(d);
return 0;
}
d->nwa = nwa;
}
/* user data */
sectors = burn_track_get_sectors(t);
open_ended = burn_track_is_open_ended(t);
burn_disc_init_track_status(o, s, tnum, sectors);
burn_print(12, "track %d is %d sectors long\n", tnum, sectors);
/* ts A61030 : this cannot happen. tnum is always < s->tracks */
if (tnum == s->tracks)
tmp = sectors > 150 ? 150 : sectors;
for (i = 0; open_ended || i < sectors - tmp; i++) {
/* ts A61023 : http://libburn.pykix.org/ticket/14
From time to time inquire drive buffer */
if ((i%64)==0)
d->read_buffer_capacity(d);
if (!sector_data(o, t, 0))
{ ret = 0; goto ex; }
/* ts A61031 */
if (open_ended) {
d->progress.sectors = sectors = i;
if (burn_track_is_data_done(t))
break;
}
/* update current progress */
d->progress.sector++;
}
for (; i < sectors; i++) {
/* ts A61030: program execution never gets to this point */
fprintf(stderr,"LIBBURN_DEBUG: TNUM=%d TRACKS=%d TMP=%d\n",
tnum, s->tracks, tmp);
burn_print(1, "last track, leadout prep\n");
/* ts A61023 */
if ((i%64)==0)
d->read_buffer_capacity(d);
if (!sector_data(o, t, 1))
{ ret = 0; goto ex; }
/* update progress */
d->progress.sector++;
}
if (t->postgap)
for (i = 0; i < 150; i++)
if (!sector_postgap(o, t->entry->point, t->entry->control,
t->mode))
{ ret = 0; goto ex; }
i = t->offset;
if (o->write_type == BURN_WRITE_SAO) {
if (d->buffer->bytes) {
int err;
err = d->write(d, d->nwa, d->buffer);
if (err == BE_CANCELLED)
{ ret = 0; goto ex; }
/* A61101 : probably this is not all payload data */
/* A61108 : but audio count is short without this */
t->writecount += d->buffer->bytes;
t->written_sectors += d->buffer->sectors;
d->progress.buffered_bytes += d->buffer->bytes;
d->nwa += d->buffer->sectors;
d->buffer->bytes = 0;
d->buffer->sectors = 0;
}
}
/* ts A61103 */
ret = 1;
ex:;
if (d->cancel)
burn_source_cancel(t->source);
if (o->write_type == BURN_WRITE_TAO) {
/* ts A71002 */
if (!burn_write_flush_buffer(o, t))
ret = 0;
/* Ensure that at least 600 kB get written */
burn_write_track_minsize(o, s, tnum);
d->sync_cache(d);
/* ts A61030 */
/* ts A91003 :
At least in simulation mode this causes NWA=0 for the
next track. cdrecord does not use CLOSE TRACK at all but
ends the tracks by SYNCHRONIZE CACHE alone.
*/
/* ts A91202 :
Peng Shao reports that his LG GH22LS30 issues an SCSI error
on CLOSE TRACK even in non-dummy mode. So i better give up
this gesture which seems not be needed by any drive.
if (!o->simulate)
if (burn_write_close_track(o, s, tnum) <= 0)
ret = 0;
*/
}
return ret;
}
/* ts A61009 */
/* @param flag bit1 = do not libdax_msgs_submit() */
int burn_disc_write_is_ok(struct burn_write_opts *o, struct burn_disc *disc,
int flag)
{
int i, t;
char msg[80];
for (i = 0; i < disc->sessions; i++)
for (t = 0; t < disc->session[i]->tracks; t++)
if (sector_headers_is_ok(
o, disc->session[i]->track[t]->mode) != 1)
goto bad_track_mode_found;
return 1;
bad_track_mode_found:;
sprintf(msg, "Unsuitable track mode 0x%x in track %d of session %d",
disc->session[i]->track[t]->mode, i+1, t+1);
if (!(flag & 2))
libdax_msgs_submit(libdax_messenger, -1, 0x0002010a,
LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
msg, 0, 0);
return 0;
}
/* ts A61218 : outsourced from burn_disc_write_sync() */
int burn_disc_init_write_status(struct burn_write_opts *o,
struct burn_disc *disc)
{
struct burn_drive *d = o->drive;
struct burn_track *t = NULL;
int sx, tx;
d->cancel = 0;
#ifdef Libburn_reset_progress_asynC
/* <<< This is now done in async.c */
/* init progress before showing the state */
d->progress.session = 0;
d->progress.sessions = disc->sessions;
d->progress.track = 0;
d->progress.tracks = disc->session[0]->tracks;
/* TODO: handle indices */
d->progress.index = 0;
d->progress.indices = disc->session[0]->track[0]->indices;
/* TODO: handle multissession discs */
/* XXX: sectors are only set during write track */
d->progress.start_sector = 0;
d->progress.sectors = 0;
d->progress.sector = 0;
d->progress.track = 0;
#endif /* Libburn_reset_progress_asynC */
/* ts A61023 */
d->progress.buffer_capacity = 0;
d->progress.buffer_available = 0;
d->progress.buffered_bytes = 0;
d->progress.buffer_min_fill = 0xffffffff;
/* ts A70711 */
d->pessimistic_buffer_free = 0;
d->pbf_altered = 0;
d->pessimistic_writes = 0;
d->waited_writes = 0;
d->waited_tries = 0;
d->waited_usec = 0;
/* Set eventual media fill up for last track only */
for (sx = 0; sx < disc->sessions; sx++)
for (tx = 0 ; tx < disc->session[sx]->tracks; tx++) {
t = disc->session[sx]->track[tx];
burn_track_set_fillup(t, 0);
}
if (o->fill_up_media && t != NULL)
burn_track_set_fillup(t, 1);
d->busy = BURN_DRIVE_WRITING;
return 1;
}
/* ts A70219 : API */
int burn_precheck_write(struct burn_write_opts *o, struct burn_disc *disc,
char reasons[BURN_REASONS_LEN], int silent)
{
enum burn_write_types wt;
struct burn_drive *d = o->drive;
char msg[160], *reason_pt;
int no_media = 0;
reason_pt= reasons;
reasons[0] = 0;
if (d->drive_role == 0) {
sprintf(reasons,
"DRIVE: is a virtual placeholder (null-drive)");
no_media = 1;
goto ex;
}
/* check write mode against write job */
wt = burn_write_opts_auto_write_type(o, disc, reasons, 1);
if (wt == BURN_WRITE_NONE) {
if (strncmp(reasons, "MEDIA: ", 7)==0)
no_media = 1;
goto ex;
}
sprintf(reasons, "%s: ", d->current_profile_text);
reason_pt= reasons + strlen(reasons);
if (d->status == BURN_DISC_UNSUITABLE)
goto unsuitable_profile;
if (d->drive_role == 2 ||
d->current_profile == 0x1a || d->current_profile == 0x12 ||
d->current_profile == 0x43) {
/* DVD+RW , DVD-RAM , BD-RE, emulated drive on stdio file */
if (o->start_byte >= 0 && (o->start_byte % 2048))
strcat(reasons,
"write start address not properly aligned to 2048, ");
} else if (d->current_profile == 0x09 || d->current_profile == 0x0a) {
/* CD-R , CD-RW */
if (!burn_disc_write_is_ok(o, disc, (!!silent) << 1))
strcat(reasons, "unsuitable track mode found, ");
if (o->start_byte >= 0)
strcat(reasons, "write start address not supported, ");
} else if (d->current_profile == 0x13) {
/* DVD-RW Restricted Overwrite */
if (o->start_byte >= 0 && (o->start_byte % 32768))
strcat(reasons,
"write start address not properly aligned to 32k, ");
} else if (d->drive_role == 3 ||
d->current_profile == 0x11 || d->current_profile == 0x14 ||
d->current_profile == 0x15 ||
d->current_profile == 0x1b || d->current_profile == 0x2b ||
d->current_profile == 0x41) {
/* DVD-R* Sequential , DVD+R[/DL] , BD-R,
sequential stdio "drive" */
if (o->start_byte >= 0)
strcat(reasons, "write start address not supported, ");
} else {
unsuitable_profile:;
sprintf(msg, "Unsuitable media detected. Profile %4.4Xh %s",
d->current_profile, d->current_profile_text);
if (!silent)
libdax_msgs_submit(libdax_messenger, d->global_index,
0x0002011e,
LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
msg, 0, 0);
strcat(reasons, "no suitable media profile detected, ");
return 0;
}
ex:;
if (reason_pt[0]) {
if (no_media) {
if (!silent)
libdax_msgs_submit(libdax_messenger,
d->global_index, 0x0002013a,
LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
"No suitable media detected", 0, 0);
return -1;
}
if (!silent)
libdax_msgs_submit(libdax_messenger,
d->global_index, 0x00020139,
LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
"Write job parameters are unsuitable", 0, 0);
return 0;
}
return 1;
}
/* ts A70129 : learned much from dvd+rw-tools-7.0/growisofs_mmc.cpp */
int burn_disc_open_track_dvd_minus_r(struct burn_write_opts *o,
struct burn_session *s, int tnum)
{
struct burn_drive *d = o->drive;
char msg[160];
int ret, lba, nwa;
off_t size;
d->send_write_parameters(d, o);
ret = d->get_nwa(d, -1, &lba, &nwa);
sprintf(msg,
"DVD pre-track %2.2d : get_nwa(%d), ret= %d , d->nwa= %d",
tnum+1, nwa, ret, d->nwa);
libdax_msgs_submit(libdax_messenger, d->global_index, 0x000002,
LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_ZERO, msg,0,0);
if (nwa > d->nwa)
d->nwa = nwa;
/* ts A70214 : eventually adjust already expanded size of track */
burn_track_apply_fillup(s->track[tnum], d->media_capacity_remaining,1);
#ifdef Libburn_pioneer_dvr_216d_with_opC
fprintf(stderr, "libburn_DEBUG: Libburn_pioneer_dvr_216d_with_opC : num_opc_tables = %d\n", d->num_opc_tables);
if (d->num_opc_tables <= 0 && !o->simulate) {
fprintf(stderr, "libburn_DEBUG: Libburn_pioneer_dvr_216d_with_opC : performing OPC\n");
d->perform_opc(d);
fprintf(stderr, "libburn_DEBUG: Libburn_pioneer_dvr_216d_with_opC : done\n");
}
#endif
#ifdef Libburn_pioneer_dvr_216d_get_evenT
mmc_get_event(d);
#endif
if (o->write_type == BURN_WRITE_SAO) { /* DAO */
/* Round track size up to write chunk size and reserve track */
size = ((off_t) burn_track_get_sectors(s->track[tnum]))
* (off_t) 2048;
if (size % o->obs)
size += (off_t) (o->obs - (size % o->obs));
ret = d->reserve_track(d, size);
if (ret <= 0) {
sprintf(msg, "Cannot reserve track of %.f bytes",
(double) size);
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020138,
LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
msg, 0, 0);
return 0;
}
}
return 1;
}
/* ts A70226 */
int burn_disc_open_track_dvd_plus_r(struct burn_write_opts *o,
struct burn_session *s, int tnum)
{
struct burn_drive *d = o->drive;
char msg[160];
int ret, lba, nwa;
off_t size;
ret = d->get_nwa(d, -1, &lba, &nwa);
sprintf(msg,
"DVD+R pre-track %2.2d : get_nwa(%d), ret= %d , d->nwa= %d",
tnum+1, nwa, ret, d->nwa);
libdax_msgs_submit(libdax_messenger, d->global_index, 0x000002,
LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_ZERO, msg,0,0);
if (nwa > d->nwa)
d->nwa = nwa;
/* ts A70214 : eventually adjust already expanded size of track */
burn_track_apply_fillup(s->track[tnum], d->media_capacity_remaining,1);
if (o->write_type == BURN_WRITE_SAO &&
! burn_track_is_open_ended(s->track[tnum])) {
/* Round track size up to write chunk size and reserve track */
size = ((off_t) burn_track_get_sectors(s->track[tnum]))
* (off_t) 2048;
if (size % o->obs)
size += (off_t) (o->obs - (size % o->obs));
ret = d->reserve_track(d, size);
if (ret <= 0) {
sprintf(msg, "Cannot reserve track of %.f bytes",
(double) size);
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020138,
LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
msg, 0, 0);
return 0;
}
}
return 1;
}
/* ts A70129 */
int burn_disc_close_track_dvd_minus_r(struct burn_write_opts *o,
struct burn_session *s, int tnum)
{
struct burn_drive *d = o->drive;
char msg[80];
/* only with Incremental writing */
if (o->write_type != BURN_WRITE_TAO)
return 2;
sprintf(msg, "Closing track %2.2d (absolute track number %d)",
tnum + 1, d->last_track_no);
libdax_msgs_submit(libdax_messenger, o->drive->global_index,0x00020119,
LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_HIGH, msg,0,0);
d->busy = BURN_DRIVE_CLOSING_SESSION;
/* Ignoring tnum here and hoping that d->last_track_no is correct */
d->close_track_session(d, 0, d->last_track_no); /* CLOSE TRACK, 001b */
d->busy = BURN_DRIVE_WRITING;
d->last_track_no++;
return 1;
}
/* ts A70229 */
int burn_disc_finalize_dvd_plus_r(struct burn_write_opts *o)
{
struct burn_drive *d = o->drive;
char msg[80];
sprintf(msg, "Finalizing %s ...",
d->current_profile_text);
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00000002,
LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_ZERO,
msg, 0, 0);
if(d->current_profile == 0x41) { /* BD-R */
/* CLOSE SESSION, 110b, Finalize Disc */
d->close_track_session(d, 3, 0); /* (3<<1)|0 = 6 */
} else {
/* CLOSE SESSION, 101b, Finalize with minimal radius */
d->close_track_session(d, 2, 1); /* (2<<1)|1 = 5 */
}
sprintf(msg, "... finalizing %s done ",
d->current_profile_text);
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00000002,
LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_ZERO,
msg, 0, 0);
return 1;
}
/* ts A70226 */
int burn_disc_close_track_dvd_plus_r(struct burn_write_opts *o,
struct burn_session *s, int tnum, int is_last_track)
{
struct burn_drive *d = o->drive;
char msg[80];
sprintf(msg,
"Closing track %2.2d (absolute track and session number %d)",
tnum + 1, d->last_track_no);
libdax_msgs_submit(libdax_messenger, o->drive->global_index,0x00020119,
LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_HIGH, msg,0,0);
d->busy = BURN_DRIVE_CLOSING_SESSION;
d->close_track_session(d, 0, d->last_track_no); /* CLOSE TRACK, 001b */
/* Each session becomes a single logical track. So to distinguish them,
it is mandatory to close the session together with each track. */
if (is_last_track && !o->multi)
burn_disc_finalize_dvd_plus_r(o);
else
d->close_track_session(d, 1, 0); /* CLOSE SESSION, 010b */
d->busy = BURN_DRIVE_WRITING;
d->last_track_no++;
return 1;
}
/* <<<
#define Libburn_simplified_dvd_chunk_transactioN 1
*/
#ifdef Libburn_simplified_dvd_chunk_transactioN
/* ts A91114 : EXPERIMENTAL, NOT COMPLETELY IMPLEMENTED
Simplified data transmission for DVD. libburn via GNU/Linux USB is 30 %
slower than growisofs or cdrecord when transmitting 32 KB chunks.
With 64 KB chunks it is 20% faster than the competitors.
No heavy CPU load is visible but there might be subtle race conditions in
the USB driver which work better with shorter time gaps between WRITE
commands.
Insight: It is actually about the interference of track source reading
with SCSI writing via USB. growisofs reads with O_DIRECT into a
mmap()ed buffer. When doing the same, libburn with 32 KB chunks
reaches similar write speed.
On the other hand, 64 KB chunks are 20% faster than that and
are not improved by reading O_DIRECT.
O_DIRECT is a property of the input fd of struct burn_source.
It can only be done with properly aligned memory and with aligned
read size. Alignment size is file system system specific.
System call
mmap(NULL, (size_t) buffer_size, PROT_READ | PROT_WRITE,
MAP_SHARED | MAP_ANONYMOUS, -1, (off_t) 0);
is supposed to allocate a properly aligned buffer.
64 KB is supposed to be a safe size.
Actually mmap() seems to be the main cause for a positive effect
of O_DIRECT.
This simplified transmission function did not bring visible benefit.
So for now it is not worth to teach it all applicable details of old
CD sector oriented transmission.
@return 1= ok, go on , 2= no input with track->open_ended = nothing written
<= 0 = error
*/
static int transact_dvd_chunk(struct burn_write_opts *opts,
struct burn_track *track)
{
int curr = 0, valid, err;
struct burn_drive *d = opts->drive;
struct buffer *out = d->buffer;
unsigned char *data = out->data;
#ifdef Libburn_log_in_and_out_streaM
/* ts A61031 */
static int tee_fd= -1;
if(tee_fd==-1)
tee_fd= open("/tmp/libburn_sg_readin",
O_WRONLY|O_CREAT|O_TRUNC,S_IRUSR|S_IWUSR);
#endif /* Libburn_log_in_and_out_streaM */
/* Read a chunk full of data */
/* ??? Do we have offset padding ? >>> First produce offset padding */;
/* <<<< */
if (0 && !track->eos) {
for (curr = 0; curr < opts->obs; curr += 2048) {
if (track->source->read != NULL)
valid = track->source->read(track->source,
data + curr, 2048);
else
valid = track->source->read_xt(track->source,
data + curr, 2048);
if (valid <= 0) {
track->eos = 1;
break;
}
track->sourcecount += valid;
#ifdef Libburn_log_in_and_out_streaM
if(tee_fd!=-1 && valid>0) {
write(tee_fd, data + curr, valid);
}
#endif /* Libburn_log_in_and_out_streaM */
}
} else if (!track->eos){
valid = track->source->read(track->source, data, opts->obs);
if (valid <= 0) {
track->eos = 1;
} else {
track->sourcecount += valid;
curr = valid;
#ifdef Libburn_log_in_and_out_streaM
if(tee_fd!=-1 && valid>0) {
write(tee_fd, data, valid);
}
#endif /* Libburn_log_in_and_out_streaM */
}
}
if (curr == 0 && track->open_ended) {
/* >>> allow tail padding */;
return 2;
}
if (curr < opts->obs)
memset(data + curr , 0, opts->obs - curr);
/* Write chunk */
out->bytes = opts->obs;
out->sectors = out->bytes / 2048;
err = d->write(d, d->nwa, out);
if (err == BE_CANCELLED)
return 0;
track->writecount += out->bytes;
track->written_sectors += out->sectors;
d->progress.buffered_bytes += out->bytes;
d->nwa += out->sectors;
out->bytes = 0;
out->sectors = 0;
return 1;
}
#endif /* Libburn_simplified_dvd_chunk_transactioN */
/* ts A61218 - A81208 */
int burn_dvd_write_track(struct burn_write_opts *o,
struct burn_session *s, int tnum, int is_last_track)
{
struct burn_track *t = s->track[tnum];
struct burn_drive *d = o->drive;
struct buffer *out = d->buffer;
int sectors;
int i, open_ended = 0, ret= 0, is_flushed = 0;
int first_buf_cap = 0, further_cap = 0, buf_cap_step = 1024;
/* ts A70213 : eventually expand size of track to max */
burn_track_apply_fillup(t, d->media_capacity_remaining, 0);
if (d->current_profile == 0x11 || d->current_profile == 0x14 ||
d->current_profile == 0x15) {
/* DVD-R, DVD-RW Sequential, DVD-R/DL Sequential */
ret = burn_disc_open_track_dvd_minus_r(o, s, tnum);
if (ret <= 0)
goto ex;
/* Pioneer DVR-216D rev 1.09 hates multiple buffer inquiries
before the drive buffer is full.
*/
first_buf_cap = 0;
further_cap = -1;
} else if (d->current_profile == 0x1b || d->current_profile == 0x2b) {
/* DVD+R , DVD+R/DL */
ret = burn_disc_open_track_dvd_plus_r(o, s, tnum);
if (ret <= 0)
goto ex;
} else if (d->current_profile == 0x41) {
/* BD-R SRM */
ret = burn_disc_open_track_dvd_plus_r(o, s, tnum);
if (ret <= 0)
goto ex;
}
sectors = burn_track_get_sectors(t);
open_ended = burn_track_is_open_ended(t);
/* <<< */
{
char msg[160];
sprintf(msg,
"DVD pre-track %2.2d : demand=%.f%s, cap=%.f\n",
tnum+1, (double) sectors * 2048.0,
(open_ended ? " (open ended)" : ""),
(double) d->media_capacity_remaining);
libdax_msgs_submit(libdax_messenger, d->global_index, 0x000002,
LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_ZERO,
msg, 0, 0);
}
/* (offset padding is done within sector_data()) */
burn_disc_init_track_status(o, s, tnum, sectors);
for (i = 0; open_ended || i < sectors; i++) {
/* From time to time inquire drive buffer */
/* ts A91110: Eventually avoid to do this more than once
before the drive buffer is full. See above DVD-
*/
if (i == first_buf_cap ||
((i % buf_cap_step) == 0 &&
(i >= further_cap || further_cap < 0))) {
d->read_buffer_capacity(d);
if (further_cap < 0)
further_cap =
d->progress.buffer_capacity / 2048 + 128;
}
#ifdef Libburn_simplified_dvd_chunk_transactioN
ret = transact_dvd_chunk(o, t);
if (ret <= 0)
{ret = 0; goto ex;}
i += o->obs / 2048 - 1;
d->progress.sector += o->obs / 2048 - 1;
#else
/* transact a (CD sized) sector */
if (!sector_data(o, t, 0))
{ ret = 0; goto ex; }
#endif
if (open_ended) {
d->progress.sectors = sectors = i;
if (burn_track_is_data_done(t))
break;
}
/* update current progress */
d->progress.sector++;
}
/* (tail padding is done in sector_data()) */
/* Pad up buffer to next full o->obs (usually 32 kB) */
if (o->obs_pad && out->bytes > 0 && out->bytes < o->obs) {
memset(out->data + out->bytes, 0, o->obs - out->bytes);
out->sectors += (o->obs - out->bytes) / 2048;
out->bytes = o->obs;
}
ret = burn_write_flush(o, t);
if (ret <= 0)
goto ex;
is_flushed = 1;
/* Eventually finalize track */
if (d->current_profile == 0x11 || d->current_profile == 0x14 ||
d->current_profile == 0x15) {
/* DVD-R, DVD-RW Sequential, DVD-R/DL Sequential */
ret = burn_disc_close_track_dvd_minus_r(o, s, tnum);
if (ret <= 0)
goto ex;
} else if (d->current_profile == 0x1b || d->current_profile == 0x2b) {
/* DVD+R , DVD+R/DL */
ret = burn_disc_close_track_dvd_plus_r(o, s, tnum,
is_last_track);
if (ret <= 0)
goto ex;
} else if (d->current_profile == 0x41) {
/* BD-R SRM */
ret = burn_disc_close_track_dvd_plus_r(o, s, tnum,
is_last_track);
if (ret <= 0)
goto ex;
}
ret = 1;
ex:;
if (d->cancel)
burn_source_cancel(t->source);
if (!is_flushed)
d->sync_cache(d); /* burn_write_flush() was not called */
return ret;
}
/* ts A61219 */
int burn_disc_close_session_dvd_plus_rw(struct burn_write_opts *o,
struct burn_session *s)
{
struct burn_drive *d = o->drive;
d->busy = BURN_DRIVE_CLOSING_SESSION;
/* This seems to be a quick end : "if (!dvd_compat)" */
/* >>> Stop de-icing (ongoing background format) quickly
by mmc_close() (but with opcode[2]=0).
Wait for unit to get ready.
return 1;
*/
/* Else: end eventual background format in a "DVD-RO" compatible way */
d->close_track_session(d, 1, 0); /* same as CLOSE SESSION for CD */
d->busy = BURN_DRIVE_WRITING;
return 1;
}
/* ts A61228 */
int burn_disc_close_session_dvd_minus_rw(struct burn_write_opts *o,
struct burn_session *s)
{
struct burn_drive *d = o->drive;
d->busy = BURN_DRIVE_CLOSING_SESSION;
if (d->current_profile == 0x13) {
d->close_track_session(d, 1, 0); /* CLOSE SESSION, 010b */
/* ??? under what circumstances to use close functiom 011b
"Finalize disc" ? */
}
d->busy = BURN_DRIVE_WRITING;
return 1;
}
/* ts A70129 : for profile 0x11 DVD-R, 0x14 DVD-RW Seq, 0x15 DVD-R/DL Seq */
int burn_disc_close_session_dvd_minus_r(struct burn_write_opts *o,
struct burn_session *s)
{
struct burn_drive *d = o->drive;
/* only for Incremental writing */
if (o->write_type != BURN_WRITE_TAO)
return 2;
#ifdef Libburn_dvd_r_dl_multi_no_close_sessioN
if (d->current_profile == 0x15 && o->multi)
return 2;
#endif
libdax_msgs_submit(libdax_messenger, o->drive->global_index,0x00020119,
LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_HIGH,
"Closing session", 0, 0);
d->busy = BURN_DRIVE_CLOSING_SESSION;
d->close_track_session(d, 1, 0); /* CLOSE SESSION, 010b */
d->busy = BURN_DRIVE_WRITING;
return 1;
}
/* ts A61218 */
int burn_dvd_write_session(struct burn_write_opts *o,
struct burn_session *s, int is_last_session)
{
int i, ret, multi_mem;
struct burn_drive *d = o->drive;
/* ts A90108 */
if (d->current_profile == 0x41 && d->status == BURN_DISC_APPENDABLE &&
d->state_of_last_session == 1) {
/* last session on BD-R is still open */;
/* BR-R were not closed by libburn-0.6.0.pl00 if o->multi==0.
This leads to an unreadable, but recoverable) media state.
Technically they are appendable although the last session
is not readable.
By default the open session gets closed here before the new
session is written. E.g. after writing a small dummy seesion
number 2 one can read session 1 and write session 3 which
points to data of session 1.
For the case that no media with 3 sessions is desired it is
possible to activate the following coarse single-session
closing code:
No new session will be written but calling programs will
report success. Quite misleading.
Activate only if really needed by
# define Libburn_bug_A90108_close_disC yes
*/
#ifdef Libburn_bug_A90108_close_disC
/* Close open session and media.
That was the goal of the failed run which led to the
unreadable (but recoverable) media state.
It is not easy to implement a general close function for
all media types. Therefore this pseudo write code is under
control of #ifdef.
*/
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020171,
LIBDAX_MSGS_SEV_NOTE, LIBDAX_MSGS_PRIO_HIGH,
"Closing BD-R with accidently open session",
0, 0);
d->close_track_session(d, 3, 0); /* CLOSE SESSION, 110b */
d->state_of_last_session = 3; /* mark as complete session */
d->status = BURN_DISC_FULL;
sleep(3); /* The caller might need time to arrange itself */
return 1;
#else /* Libburn_bug_A90108_close_disC */
/* This is the default mode.
*/
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020170,
LIBDAX_MSGS_SEV_NOTE, LIBDAX_MSGS_PRIO_HIGH,
"Closing open session before writing new one",
0, 0);
d->close_track_session(d, 1, 0); /* CLOSE SESSION, 010b */
d->state_of_last_session = 3; /* mark as complete session */
#endif /* ! Libburn_bug_A90108_close_disC */
}
for (i = 0; i < s->tracks; i++) {
ret = burn_dvd_write_track(o, s, i,
is_last_session && i == (s->tracks - 1));
if (ret <= 0)
break;
}
if (d->current_profile == 0x11 || d->current_profile == 0x14 ||
d->current_profile == 0x15) {
/* DVD-R , DVD-RW Sequential, DVD-R/DL Sequential */
multi_mem = o->multi;
if (!is_last_session)
o->multi = 1;
ret = burn_disc_close_session_dvd_minus_r(o, s);
o->multi = multi_mem;
if (ret <= 0)
return 0;
} else if (d->current_profile == 0x12 || d->current_profile == 0x43) {
/* DVD-RAM , BD-RE */
/* ??? any finalization needed ? */;
} else if (d->current_profile == 0x13) {
/* DVD-RW restricted overwrite */
if (d->needs_close_session) {
ret = burn_disc_close_session_dvd_minus_rw(o, s);
if (ret <= 0)
return 0;
}
} else if (d->current_profile == 0x1a) {
/* DVD+RW */
if (d->needs_close_session) {
ret = burn_disc_close_session_dvd_plus_rw(o, s);
if (ret <= 0)
return 0;
}
} else if (d->current_profile == 0x1b || d->current_profile == 0x2b) {
/* DVD+R , DVD+R/DL do each track as an own session */;
} else if (d->current_profile == 0x41) {
/* BD-R SRM do each track as an own session */;
}
return 1;
}
/* ts A61218 : learned much from dvd+rw-tools-7.0/growisofs_mmc.cpp */
int burn_disc_setup_dvd_plus_rw(struct burn_write_opts *o,
struct burn_disc *disc)
{
struct burn_drive *d = o->drive;
int ret;
if (d->bg_format_status==0 || d->bg_format_status==1) {
d->busy = BURN_DRIVE_FORMATTING;
/* start or re-start dvd_plus_rw formatting */
ret = d->format_unit(d, (off_t) 0, 0);
if (ret <= 0)
return 0;
d->busy = BURN_DRIVE_WRITING;
d->needs_close_session = 1;
}
/* >>> perform OPC if needed */;
/* >>> ? what else ? */;
return 1;
}
/* ts A61228 : learned much from dvd+rw-tools-7.0/growisofs_mmc.cpp */
int burn_disc_setup_dvd_minus_rw(struct burn_write_opts *o,
struct burn_disc *disc)
{
struct burn_drive *d = o->drive;
char msg[160];
int ret;
d->nwa = 0;
if (o->start_byte >= 0) {
d->nwa = o->start_byte / 32768; /* align to 32 kB */
sprintf(msg, "Write start address is %d * 32768", d->nwa);
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020127,
LIBDAX_MSGS_SEV_NOTE, LIBDAX_MSGS_PRIO_HIGH,
msg, 0, 0);
d->nwa *= 16; /* convert to 2048 block units */
}
/* ??? mmc5r03c.pdf 7.5.2 :
"For DVD-RW media ... If a medium is in Restricted overwrite
mode, this mode page shall not be used."
But growisofs composes a page 5 and sends it.
mmc5r03c.pdf 5.3.16 , table 127 specifies that mode page 5
shall be supported with feature 0026h Restricted Overwrite.
5.3.22 describes a feature 002Ch Rigid Restrictive Overwrite
which seems to apply to DVD-RW and does not mention page 5.
5.4.14 finally states that profile 0013h includes feature
002Ch rather than 0026h.
d->send_write_parameters(d, o);
*/
d->busy = BURN_DRIVE_FORMATTING;
/* "quick grow" to at least byte equivalent of d->nwa */
ret = d->format_unit(d, (off_t) d->nwa * (off_t) 2048,
(d->nwa > 0) << 3);
if (ret <= 0)
return 0;
d->busy = BURN_DRIVE_WRITING;
/* >>> perform OPC if needed */;
return 1;
}
/* ts A70129 : for DVD-R[W] Sequential Recoding */
int burn_disc_setup_dvd_minus_r(struct burn_write_opts *o,
struct burn_disc *disc)
{
struct burn_drive *d = o->drive;
/* most setup is in burn_disc_setup_track_dvd_minus_r() */;
d->nwa = 0;
return 1;
}
/* ts A70226 : for DVD+R , DVD+R/DL */
int burn_disc_setup_dvd_plus_r(struct burn_write_opts *o,
struct burn_disc *disc)
{
struct burn_drive *d = o->drive;
/* most setup is in burn_disc_setup_track_dvd_plus_r() */;
d->nwa = 0;
return 1;
}
/* ts A61218 - A70415 */
int burn_dvd_write_sync(struct burn_write_opts *o,
struct burn_disc *disc)
{
int i, ret, o_end;
off_t default_size = 0;
struct burn_drive *d = o->drive;
struct burn_track *t;
char msg[160];
d->needs_close_session = 0;
/* buffer flush trigger for sector.c:get_sector() */
o->obs = Libburn_dvd_obS;
if (d->current_profile == 0x1a || d->current_profile == 0x12 ||
d->current_profile == 0x43) {
/* DVD+RW , DVD-RAM , BD-RE */
ret = 1;
if (d->current_profile == 0x1a)
ret = burn_disc_setup_dvd_plus_rw(o, disc);
if (ret <= 0) {
sprintf(msg,
"Write preparation setup failed for DVD+RW");
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020121,
LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
msg, 0, 0);
goto early_failure;
}
d->nwa = 0;
if (o->start_byte >= 0) {
d->nwa = o->start_byte / 2048;
sprintf(msg, "Write start address is %d * 2048",
d->nwa);
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020127,
LIBDAX_MSGS_SEV_NOTE, LIBDAX_MSGS_PRIO_HIGH,
msg, 0, 0);
}
o->obs_pad = 0; /* no filling-up of track's last 32k buffer */
if (d->current_profile == 0x43) /* BD-RE */
o->obs = Libburn_bd_re_obS;
if (d->do_stream_recording) {
o->obs_pad = 1;
if (d->current_profile == 0x43) /* BD-RE */
o->obs = Libburn_bd_re_streamed_obS;
}
} else if (d->current_profile == 0x13) {
/* DVD-RW Restricted Overwrite */
ret = burn_disc_setup_dvd_minus_rw(o, disc);
if (ret <= 0) {
sprintf(msg,
"Write preparation setup failed for DVD-RW");
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020121,
LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
msg, 0, 0);
goto early_failure;
}
/* _Rigid_ Restricted Overwrite demands this */
o->obs_pad = 1; /* fill-up track's last 32k buffer */
} else if (d->current_profile == 0x11 || d->current_profile == 0x14 ||
d->current_profile == 0x15) {
/* DVD-R , DVD-RW Sequential , DVD-R/DL Sequential */
t = disc->session[0]->track[0];
o_end = ( burn_track_is_open_ended(t) && !o->fill_up_media );
default_size = burn_track_get_default_size(t);
if (o->write_type == BURN_WRITE_SAO && o_end) {
sprintf(msg, "Activated track default size %.f",
(double) default_size);
libdax_msgs_submit(libdax_messenger,
d->global_index, 0x0002012e,
LIBDAX_MSGS_SEV_NOTE, LIBDAX_MSGS_PRIO_HIGH,
msg, 0, 0);
burn_track_set_size(t, default_size);
}
ret = burn_disc_setup_dvd_minus_r(o, disc);
if (ret <= 0) {
sprintf(msg,
"Write preparation setup failed for DVD-R[W]");
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020121,
LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
msg, 0, 0);
goto early_failure;
}
/* ??? padding needed ??? cowardly doing it for now */
o->obs_pad = 1; /* fill-up track's last 32k buffer */
} else if (d->current_profile == 0x1b || d->current_profile == 0x2b ||
d->current_profile == 0x41) {
/* DVD+R , DVD+R/DL , BD-R SRM */
/* >>> ts A81208 : with BD-R set o->obs to 64 kB ? */
t = disc->session[0]->track[0];
o_end = ( burn_track_is_open_ended(t) && !o->fill_up_media );
default_size = burn_track_get_default_size(t);
if (o->write_type == BURN_WRITE_SAO && o_end) {
sprintf(msg, "Activated track default size %.f",
(double) default_size);
libdax_msgs_submit(libdax_messenger,
d->global_index, 0x0002012e,
LIBDAX_MSGS_SEV_NOTE, LIBDAX_MSGS_PRIO_HIGH,
msg, 0, 0);
burn_track_set_size(t, default_size);
}
ret = burn_disc_setup_dvd_plus_r(o, disc);
if (ret <= 0) {
sprintf(msg, "Write preparation setup failed for %s",
d->current_profile == 0x41 ? "BD-R" : "DVD+R");
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020121,
LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
msg, 0, 0);
goto early_failure;
}
/* ??? padding needed ??? cowardly doing it for now */
o->obs_pad = 1; /* fill-up track's last 32k buffer */
if (d->do_stream_recording) {
if (d->current_profile == 0x41) /* BD-R */
o->obs = Libburn_bd_re_streamed_obS;
}
}
#ifdef Libburn_dvd_obs_default_64K
o->obs = 64 * 1024;
#endif
/* <<< test only : Does this increase effective speed with USB ?
ts A90801 : 64kB: speed with 16x DVD-R is 12 rather than 8
128kB: glibc complains about double free
With BURN_OS_TRANSPORT_BUFFER_SIZE
enlarged to 128 MB, the first WRITE fails
with an i/o error.
o->obs = 64 * 1024;
*/
if (o->dvd_obs_override >= 32 * 1024)
o->obs = o->dvd_obs_override;
if (o->obs > BUFFER_SIZE) {
sprintf(msg, "Chosen write chunk size %d exceeds system dependent buffer size", o->obs);
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00000002, LIBDAX_MSGS_SEV_DEBUG,
LIBDAX_MSGS_PRIO_ZERO, msg, 0, 0);
o->obs = 32 * 1024; /* This size is required to work */
}
if (d->do_stream_recording &&
(d->current_profile == 0x43 || d->current_profile == 0x41) &&
o->obs < Libburn_bd_re_streamed_obS) {
/* LG GGW-H20 writes junk with stream recording and obs=32k */
sprintf(msg,
"Stream recording disabled because of small OS buffer");
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020176, LIBDAX_MSGS_SEV_NOTE,
LIBDAX_MSGS_PRIO_HIGH, msg, 0, 0);
d->do_stream_recording = 0;
}
sprintf(msg, "dvd/bd Profile= %2.2Xh , obs= %d , obs_pad= %d",
d->current_profile, o->obs, o->obs_pad);
libdax_msgs_submit(libdax_messenger, d->global_index, 0x00000002,
LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_ZERO, msg, 0, 0);
for (i = 0; i < disc->sessions; i++) {
/* update progress */
d->progress.session = i;
d->progress.tracks = disc->session[i]->tracks;
ret = burn_dvd_write_session(o, disc->session[i],
i == (disc->sessions - 1));
if (ret <= 0)
goto ex;
/* XXX: currently signs an end of session */
d->progress.sector = 0;
d->progress.start_sector = 0;
d->progress.sectors = 0;
}
ret = 1;
ex:;
/* >>> eventual emergency finalization measures */
/* update media state records */
burn_drive_mark_unready(d);
burn_drive_inquire_media(d);
if (d->current_profile == 0x41 && d->complete_sessions >= 300) {
sprintf(msg, "Sequential BD-R media now contains %d sessions. It is likely to soon fail writing.", d->complete_sessions);
libdax_msgs_submit(libdax_messenger, d->global_index,
0x0002017b, LIBDAX_MSGS_SEV_WARNING,
LIBDAX_MSGS_PRIO_ZERO, msg, 0, 0);
}
return ret;
early_failure:;
return 0;
}
/* ts A70904 */
int burn_stdio_open_write(struct burn_drive *d, off_t start_byte,
int sector_size, int flag)
{
/* <<< We need _LARGEFILE64_SOURCE defined by the build system.
*/
#ifndef O_LARGEFILE
#define O_LARGEFILE 0
#endif
int fd = -1;
int mode = O_RDWR | O_CREAT | O_LARGEFILE;
char msg[160];
if (d->devname[0] == 0) /* null drives should not come here */
return -1;
fd = burn_drive__fd_from_special_adr(d->devname);
if (fd >= 0)
fd = dup(fd); /* check validity and make closeable */
else
fd = open(d->devname, mode, S_IRUSR | S_IWUSR);
if (fd == -1) {
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020005,
LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
"Failed to open device (a pseudo-drive)", errno, 0);
d->cancel = 1;
return -1;
}
if (start_byte < 0)
start_byte = 0;
if (d->drive_role == 2)
if (lseek(fd, start_byte, SEEK_SET)==-1) {
sprintf(msg, "Cannot address start byte %.f",
(double) start_byte);
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020147,
LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
msg, errno, 0);
close(fd);
d->cancel = 1;
fd = -1;
}
d->nwa = start_byte / sector_size;
return fd;
}
/* ts A70904 */
int burn_stdio_read_source(struct burn_source *source, char *buf, int bufsize,
struct burn_write_opts *o, int flag)
{
int count= 0, todo;
for(todo = bufsize; todo > 0; todo -= count) {
if(source->read!=NULL)
count = source->read(source,
(unsigned char *) (buf + (bufsize - todo)), todo);
else
count = source->read_xt(source,
(unsigned char *) (buf + (bufsize - todo)), todo);
if (count <= 0)
break;
}
return (bufsize - todo);
}
/* ts A70904 */
int burn_stdio_write(int fd, char *buf, int count, struct burn_drive *d,
int flag)
{
if (d->cancel)
return 0;
/*
fprintf(stderr, "libburn_DEBUG: write(%d, %lX, %d)\n",
fd, (unsigned long) buf, count);
*/
if (write(fd, buf, count) != count) {
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020148,
LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
"Cannot write desired amount of data", errno, 0);
d->cancel = 1;
return 0;
}
return count;
}
/* ts A70910 : to be used as burn_drive.write(), emulating mmc_write() */
int burn_stdio_mmc_write(struct burn_drive *d, int start, struct buffer *buf)
{
int ret;
off_t start_byte;
if (d->cancel)
return BE_CANCELLED;
if (d->stdio_fd < 0) {
libdax_msgs_submit(libdax_messenger, d->global_index,
0x0002017d,
LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
"Invalid file descriptor with stdio pseudo-drive",
0, 0);
d->cancel = 1;
return BE_CANCELLED;
}
if (start != d->nwa) {
char msg[80];
start_byte = ((off_t) start) *
(off_t) (buf->bytes / buf->sectors);
if (lseek(d->stdio_fd, start_byte, SEEK_SET)==-1) {
sprintf(msg, "Cannot address start byte %.f",
(double) start_byte);
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020147,
LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
msg, errno, 0);
d->cancel = 1;
return BE_CANCELLED;
}
d->nwa = start;
}
ret = burn_stdio_write(d->stdio_fd,(char *)buf->data, buf->bytes, d,0);
if (ret <= 0)
return BE_CANCELLED;
d->nwa += buf->sectors;
return 0;
}
/* ts A70910 : to be used as burn_drive.write(),
emulating mmc_write() with simulated writing. */
int burn_stdio_mmc_dummy_write(struct burn_drive *d, int start,
struct buffer *buf)
{
if (d->cancel)
return BE_CANCELLED;
d->nwa = start + buf->sectors;
return 0;
}
/* ts A70911 */
/* Flush stdio system buffer to physical device.
@param flag bit0= do not report debug message (intermediate sync)
*/
int burn_stdio_sync_cache(int fd, struct burn_drive *d, int flag)
{
if (fd < 0) {
libdax_msgs_submit(libdax_messenger, d->global_index,
0x0002017d,
LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
"Invalid file descriptor with stdio pseudo-drive",
0, 0);
d->cancel = 1;
return 0;
}
d->needs_sync_cache = 0;
if (!(flag & 1))
libdax_msgs_submit(libdax_messenger, -1, 0x00000002,
LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_ZERO,
"syncing cache (stdio fsync)", 0, 0);
if (fsync(fd) != 0) {
if (errno == EINVAL) /* E.g. /dev/null cannot fsync */
return 1;
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020148,
LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
"Cannot write desired amount of data", errno, 0);
d->cancel = 1;
return 0;
}
return 1;
}
/* ts A70911 : to be used as burn_drive.sync_cache(),
emulating mmc_sync_cache() */
void burn_stdio_mmc_sync_cache(struct burn_drive *d)
{
burn_stdio_sync_cache(d->stdio_fd, d, 0);
}
/* ts A70912 */
/* Enforces eventual nominal write speed.
@param flag bit0= initialize *prev_time */
int burn_stdio_slowdown(struct burn_drive *d, struct timeval *prev_time,
int amount, int flag)
{
struct timeval tnow;
struct timezone dummy_tz;
double to_wait;
if (flag & 1) {
gettimeofday(prev_time, &dummy_tz);
return 1;
}
if(d->nominal_write_speed <= 0)
return 2;
gettimeofday(&tnow, &dummy_tz);
to_wait = ( ((double) amount) / (double) d->nominal_write_speed ) -
(double) ( tnow.tv_sec - prev_time->tv_sec ) -
(double) ( tnow.tv_usec - prev_time->tv_usec ) / 1.0e6
- 0.001; /* best would be 1 / kernel granularity HZ */
if (to_wait >= 0.0001) {
usleep((int) (to_wait * 1000000.0));
}
gettimeofday(prev_time, &dummy_tz);
return 1;
}
/* ts A70904 */
int burn_stdio_write_track(struct burn_write_opts *o, struct burn_session *s,
int tnum, int flag)
{
int open_ended, bufsize, ret, sectors, fd;
struct burn_track *t = s->track[tnum];
struct burn_drive *d = o->drive;
char buf[16*2048];
int i, prev_sync_sector = 0;
struct buffer *out = d->buffer;
struct timeval prev_time;
bufsize = sizeof(buf);
fd = d->stdio_fd;
sectors = burn_track_get_sectors(t);
burn_disc_init_track_status(o, s, tnum, sectors);
open_ended = burn_track_is_open_ended(t);
/* attach stdio emulators for mmc_*() functions */
if (o->simulate)
d->write = burn_stdio_mmc_dummy_write;
else
d->write = burn_stdio_mmc_write;
d->sync_cache = burn_stdio_mmc_sync_cache;
burn_stdio_slowdown(d, &prev_time, 0, 1); /* initialize */
for (i = 0; open_ended || i < sectors; i++) {
/* transact a (CD sized) sector */
if (!sector_data(o, t, 0))
{ret= 0; goto ex;}
if (open_ended) {
d->progress.sectors = sectors = d->progress.sector;
if (burn_track_is_data_done(t))
break;
}
d->progress.sector++;
/* Flush to disk from time to time */
if (d->progress.sector - prev_sync_sector >=
o->stdio_fsync_size && o->stdio_fsync_size > 0) {
prev_sync_sector = d->progress.sector;
if (!o->simulate)
burn_stdio_sync_cache(d->stdio_fd, d, 1);
}
if ((d->progress.sector % 512) == 0)
burn_stdio_slowdown(d, &prev_time, 512 * 2, 0);
}
/* Pad up buffer to next full o->obs (usually 32 kB) */
if (o->obs_pad && out->bytes > 0 && out->bytes < o->obs) {
memset(out->data + out->bytes, 0, o->obs - out->bytes);
out->sectors += (o->obs - out->bytes) / 2048;
out->bytes = o->obs;
}
ret = burn_write_flush(o, t);
ret= 1;
ex:;
if (d->cancel)
burn_source_cancel(t->source);
return ret;
}
/* ts A70904 */
int burn_stdio_write_sync(struct burn_write_opts *o,
struct burn_disc *disc)
{
int ret;
struct burn_drive *d = o->drive;
d->needs_close_session = 0;
o->obs_pad = 0; /* no filling-up of track's last 32k buffer */
o->obs = 32*1024; /* buffer size */
if (disc->sessions != 1)
{ret= 0 ; goto ex;}
if (disc->session[0]->tracks != 1)
{ret= 0 ; goto ex;}
/* update progress */
d->progress.session = 0;
d->progress.tracks = 1;
/* >>> adjust sector size (2048) to eventual audio or even raw */
/* open target file */
if (d->stdio_fd >= 0)
close(d->stdio_fd);
d->stdio_fd = burn_stdio_open_write(d, o->start_byte, 2048, 0);
if (d->stdio_fd == -1)
{ret = 0; goto ex;}
ret = burn_stdio_write_track(o, disc->session[0], 0, 0);
if (ret <= 0)
goto ex;
/* XXX: currently signs an end of session */
d->progress.sector = 0;
d->progress.start_sector = 0;
d->progress.sectors = 0;
ret = 1;
ex:;
if (d->stdio_fd >= 0)
close(d->stdio_fd);
d->stdio_fd = -1;
/* update media state records */
burn_drive_mark_unready(d);
/* <<< d->busy = BURN_DRIVE_IDLE; */
return ret;
}
void burn_disc_write_sync(struct burn_write_opts *o, struct burn_disc *disc)
{
struct cue_sheet *sheet;
struct burn_drive *d = o->drive;
struct buffer *buffer_mem = o->drive->buffer;
struct burn_track *lt, *t;
int first = 1, i, ret, lba, nwa = 0, multi_mem;
off_t default_size;
char msg[80];
/* ts A60924 : libburn/message.c gets obsoleted
burn_message_clear_queue();
*/
/* ts A61224 */
burn_disc_init_write_status(o, disc); /* must be done very early */
/* ts A80412 , A90227 */
d->do_stream_recording = !!o->do_stream_recording;
if (o->do_stream_recording >= 16)
d->stream_recording_start = o->do_stream_recording;
else
d->stream_recording_start = 0;
/* ts A91122 : Get buffer suitable for sources made by
burn_os_open_track_src() */
d->buffer = burn_os_alloc_buffer(sizeof(struct buffer), 0);
if (d->buffer == NULL)
goto fail_wo_sync;
/* >>> ts A90321
memset(d->buffer, 0, sizeof(struct buffer));
fprintf(stderr, "libburn_DEBUG: d->buffer = %lX , size = %d\n",
(unsigned long) d->buffer, (int) sizeof(struct buffer));
calloc() seems not to have the desired effect. valgrind warns:
==18251== Syscall param write(buf) points to uninitialised byte(s)
==18251== at 0x5071DEB: (within /lib64/libpthread-2.5.so)
==18251== by 0x4723FA: burn_stdio_write (write.c:1850)
==18251== by 0x4725DC: burn_stdio_mmc_write (write.c:1894)
==18251== by 0x483B7A: get_sector (sector.c:229)
==18251== by 0x484F11: sector_data (sector.c:639)
==18251== by 0x4729FE: burn_stdio_write_track (write.c:2012)
==18251== by 0x472CF4: burn_stdio_write_sync (write.c:2072)
==18251== by 0x472E8D: burn_disc_write_sync (write.c:2125) <<< we are here
==18251== by 0x460254: write_disc_worker_func (async.c:514)
==18251== by 0x506B09D: start_thread (in /lib64/libpthread-2.5.so)
==18251== by 0x55484CC: clone (in /lib64/libc-2.5.so)
*/
d->rlba = -150;
d->toc_temp = 9;
/* ts A70904 */
if (d->drive_role != 1) {
ret = burn_stdio_write_sync(o, disc);
if (ret <= 0)
goto fail_wo_sync;
goto ex;
}
/* ts A61218 */
if (! d->current_is_cd_profile) {
ret = burn_dvd_write_sync(o, disc);
if (ret <= 0)
goto fail_wo_sync;
goto ex;
}
/* ts A70521 : GNU/Linux 2.4 USB audio fails with 64 kiB */
/* ts A80414 : might need 64 kiB for BD-RE streaming */
/* buffer flush trigger for sector.c:get_sector() */
o->obs = Libburn_cd_obS;
sprintf(msg, "cd Profile= %2.2Xh , obs= %d , obs_pad= %d",
d->current_profile, o->obs, o->obs_pad);
libdax_msgs_submit(libdax_messenger, d->global_index, 0x00000002,
LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_ZERO, msg, 0, 0);
/* ts A70218 */
if (o->write_type == BURN_WRITE_SAO) {
for (i = 0 ; i < disc->session[0]->tracks; i++) {
t = disc->session[0]->track[i];
if (burn_track_is_open_ended(t)) {
default_size = burn_track_get_default_size(t);
sprintf(msg,
"Activated track default size %.f",
(double) default_size);
libdax_msgs_submit(libdax_messenger,
d->global_index, 0x0002012e,
LIBDAX_MSGS_SEV_NOTE,
LIBDAX_MSGS_PRIO_HIGH, msg, 0, 0);
burn_track_set_size(t, default_size);
}
}
}
burn_print(1, "sync write of %d CD sessions\n", disc->sessions);
/* Apparently some drives require this command to be sent, and a few drives
return crap. so we send the command, then ignore the result.
*/
/* ts A61107 : moved up send_write_parameters because LG GSA-4082B
seems to dislike get_nwa() in advance */
d->alba = d->start_lba; /* ts A61114: this looks senseless */
d->nwa = d->alba;
if (o->write_type == BURN_WRITE_TAO) {
nwa = 0; /* get_nwa() will be called in burn_track() */
} else {
d->send_write_parameters(d, o);
ret = d->get_nwa(d, -1, &lba, &nwa);
sprintf(msg,
"SAO|RAW: Inquired nwa: %d , ret= %d , cap=%.f\n",
nwa, ret, (double) d->media_capacity_remaining);
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00000002,
LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_ZERO,
msg,0, 0);
/* >>> ts A70212 : CD-DAO/SAO : eventually expand size of last track to maximum */;
}
for (i = 0; i < disc->sessions; i++) {
/* update progress */
d->progress.session = i;
d->progress.tracks = disc->session[i]->tracks;
/* ts A61114: added parameter nwa */
sheet = burn_create_toc_entries(o, disc->session[i], nwa);
/* ts A61009 */
if (sheet == NULL)
goto fail;
/* print_cue(sheet);*/
if (o->write_type == BURN_WRITE_SAO)
d->send_cue_sheet(d, sheet);
free(sheet);
if (o->write_type == BURN_WRITE_RAW) {
if (!burn_write_leadin(o, disc->session[i], first))
goto fail;
} else {
if (first) {
/* ts A61030 : 0 made the burner take data. */
/* ts A61103 : Meanwhile d->nwa is updated in
burn_write_track() */
if(o->write_type == BURN_WRITE_TAO) {
d->nwa= d->alba = 0;
} else {
#ifdef Libburn_sao_can_appenD
/* ts A61114: address for d->write() */
if (d->status == BURN_DISC_APPENDABLE
&& o->write_type == BURN_WRITE_SAO) {
d->nwa = d->alba = nwa-150;
sprintf(msg,
"SAO appendable d->nwa= %d\n", d->nwa);
libdax_msgs_submit(
libdax_messenger, d->global_index, 0x000002,
LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_ZERO,
msg, 0, 0);
} else {
d->nwa = -150;
d->alba = -150;
}
#else
d->nwa = -150;
d->alba = -150;
#endif /* ! Libburn_sao_can_appenD */
}
} else {
d->nwa += 4500;
d->alba += 4500;
}
}
multi_mem = o->multi;
if(i < disc->sessions - 1)
o->multi = 1;
ret = burn_write_session(o, disc->session[i]);
o->multi = multi_mem;
if (!ret)
goto fail;
lt = disc->session[i]->track[disc->session[i]->tracks - 1];
if (o->write_type == BURN_WRITE_RAW) {
if (!burn_write_leadout(o, first, lt->entry->control,
lt->mode))
goto fail;
} else {
/* ts A61030 */
if (o->write_type != BURN_WRITE_TAO)
if (!burn_write_flush(o, NULL))
goto fail;
d->nwa += first ? 6750 : 2250;
d->alba += first ? 6750 : 2250;
}
if (first)
first = 0;
/* XXX: currently signs an end of session */
d->progress.sector = 0;
d->progress.start_sector = 0;
d->progress.sectors = 0;
}
/* ts A61030: extended skipping of flush to TAO: session is closed */
if (o->write_type != BURN_WRITE_SAO && o->write_type != BURN_WRITE_TAO)
if (!burn_write_flush(o, NULL))
goto fail;
sleep(1);
/* ts A61125 : update media state records */
burn_drive_mark_unready(d);
burn_drive_inquire_media(d);
burn_print(1, "done\n");
/* <<< d->busy = BURN_DRIVE_IDLE; */
/* ts A61012 : This return was traditionally missing. I suspect this
to have caused Cdrskin_eject() failures */
goto ex;
fail:
d->sync_cache(d);
fail_wo_sync:;
usleep(500001); /* ts A61222: to avoid a warning from remove_worker()*/
burn_print(1, "done - failed\n");
libdax_msgs_submit(libdax_messenger, d->global_index, 0x0002010b,
LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
"Burn run failed", 0, 0);
d->cancel = 1;
/* <<< d->busy = BURN_DRIVE_IDLE; */
ex:;
d->do_stream_recording = 0;
if (d->buffer != NULL)
burn_os_free_buffer((char *) d->buffer,
sizeof(struct buffer), 0);
d->buffer = buffer_mem;
return;
}
/* ts A70811 : API function */
int burn_random_access_write(struct burn_drive *d, off_t byte_address,
char *data, off_t data_count, int flag)
{
int alignment = 0, start, upto, chunksize, err, fd = -1, ret;
char msg[81], *rpt;
struct buffer buf, *buffer_mem = d->buffer;
if (d->released) {
libdax_msgs_submit(libdax_messenger,
d->global_index, 0x00020142,
LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
"Drive is not grabbed on random access write", 0, 0);
return 0;
}
if(d->drive_role == 0) {
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020146,
LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
"Drive is a virtual placeholder (null-drive)", 0, 0);
return 0;
}
if(d->drive_role == 2)
alignment = 2 * 1024;
if (d->current_profile == 0x12) /* DVD-RAM */
alignment = 2 * 1024;
if (d->current_profile == 0x13) /* DVD-RW restricted overwrite */
alignment = 32 * 1024;
if (d->current_profile == 0x1a) /* DVD+RW */
alignment = 2 * 1024;
if (d->current_profile == 0x43) /* BD-RE */
alignment = 2 * 1024;
if (alignment == 0) {
sprintf(msg, "Write start address not supported");
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020125,
LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
"Write start address not supported", 0, 0);
return 0;
}
if ((byte_address % alignment) != 0) {
sprintf(msg,
"Write start address not properly aligned (%d bytes)",
alignment);
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020126,
LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
msg, 0, 0);
return 0;
}
if ((data_count % alignment) != 0) {
sprintf(msg,
"Write data count not properly aligned (%ld bytes)",
(long) alignment);
libdax_msgs_submit(libdax_messenger, d->global_index,
0x00020141,
LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
msg, 0, 0);
return 0;
}
if (d->busy != BURN_DRIVE_IDLE) {
libdax_msgs_submit(libdax_messenger,
d->global_index, 0x00020140,
LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
"Drive is busy on attempt to write random access",0,0);
return 0;
}
if(d->drive_role != 1) {
fd = burn_stdio_open_write(d, byte_address, 2048, 0);
if (fd == -1)
return 0;
}
d->busy = BURN_DRIVE_WRITING_SYNC;
d->buffer = &buf;
start = byte_address / 2048;
upto = start + data_count / 2048;
rpt = data;
for (; start < upto; start += 16) {
chunksize = upto - start;
if (chunksize > 16)
chunksize = 16;
d->buffer->bytes = chunksize * 2048;
memcpy(d->buffer->data, rpt, d->buffer->bytes);
rpt += d->buffer->bytes;
d->buffer->sectors = chunksize;
d->nwa = start;
if(d->drive_role == 1) {
err = d->write(d, d->nwa, d->buffer);
} else {
ret = burn_stdio_write(fd, (char *) d->buffer->data,
d->buffer->bytes, d, 0);
err = 0;
if (ret <= 0)
err = BE_CANCELLED;
}
if (err == BE_CANCELLED) {
d->busy = BURN_DRIVE_IDLE;
if(fd >= 0)
close(fd);
return (-(start * 2048 - byte_address));
}
}
if(d->drive_role == 1)
d->needs_sync_cache = 1;
if(flag & 1) {
if(d->drive_role == 1)
d->sync_cache(d);
else
burn_stdio_sync_cache(fd, d, 0);
d->needs_sync_cache = 0;
}
if(fd >= 0)
close(fd);
d->buffer = buffer_mem;
d->busy = BURN_DRIVE_IDLE;
return 1;
}