605 lines
25 KiB
Plaintext
605 lines
25 KiB
Plaintext
------------------------------------------------------------------------------
|
|
libburnia-project.org scdbackup.sourceforge.net/cdrskin_eng.html
|
|
------------------------------------------------------------------------------
|
|
cdrskin. By Thomas Schmitt <scdbackup@gmx.net>
|
|
Integrated sub project of libburnia-project.org but also published via:
|
|
http://scdbackup.sourceforge.net/cdrskin_eng.html
|
|
http://scdbackup.sourceforge.net/cdrskin-1.4.6.tar.gz
|
|
|
|
Copyright (C) 2006-2016 Thomas Schmitt, provided under GPL version 2 or later.
|
|
------------------------------------------------------------------------------
|
|
|
|
|
|
cdrskin is a limited cdrecord compatibility wrapper which allows to use
|
|
most of the libburn features from the command line.
|
|
|
|
Currently it is fully supported on GNU/Linux with kernels >= 2.4, on FreeBSD,
|
|
on OpenSolaris, and on NetBSD.
|
|
IDE drives under Linux 2.4. need kernel module ide-scsi.
|
|
ATA and SATA drives under FreeBSD need kernel module atapicam.
|
|
On other X/Open compliant systems there will only be emulated drives, but no
|
|
direct MMC operation on real CD/DVD/BD drives.
|
|
|
|
By using this software you agree to the disclaimer at the end of this text
|
|
"This software is provided as is. There is no warranty implied and ..."
|
|
|
|
|
|
Compilation, First Glimpse, Installation
|
|
|
|
Obtain cdrskin-1.4.6.tar.gz, take it to a directory of your choice and do:
|
|
|
|
tar xzf cdrskin-1.4.6.tar.gz
|
|
cd cdrskin-1.4.6
|
|
|
|
Within that directory execute:
|
|
|
|
./configure --prefix=/usr
|
|
make
|
|
|
|
This will already produce a cdrskin binary. But it will be necessary to
|
|
install libburn in order to use this binary.
|
|
|
|
In order to surely get a standalone binary, execute
|
|
|
|
cdrskin/compile_cdrskin.sh
|
|
|
|
Version identification and help texts available afterwards:
|
|
cdrskin/cdrskin -version
|
|
cdrskin/cdrskin --help
|
|
cdrskin/cdrskin -help
|
|
man cdrskin/cdrskin.1
|
|
|
|
|
|
Install (eventually as superuser) cdrskin to a directory where it can be found:
|
|
The command for global installation of both, libburn and cdrskin is
|
|
make install
|
|
If the library libburn.so.4 is not found with a test run of cdrskin, then
|
|
try whether command
|
|
ldconfig
|
|
makes it accessible. With the statically linked binary this should not matter.
|
|
|
|
With that static binary you may as well do the few necessary actions manually.
|
|
If cdrskin was already installed by a previous version, or by "make install"
|
|
in the course of this installation, then find out where:
|
|
which cdrskin
|
|
Copy your standalone binary to exactly the address which you get as reply.
|
|
E.g.:
|
|
|
|
cp cdrskin/cdrskin /usr/bin/cdrskin
|
|
|
|
Check the version timestamps of the globally installed binary
|
|
cdrskin -version
|
|
|
|
It is not necessary for the standalone cdrskin binary to have libburn
|
|
installed, since it incorporates the necessary libburn parts at compile time.
|
|
It will not collide with an installed version of libburn either.
|
|
But libpthread must be installed on the system and glibc has to match. (See
|
|
below for a way to create a totally static linked binary.)
|
|
|
|
To install the man page, you may do: echo $MANPATH and choose one of the
|
|
listed directories to copy the man-page under its ./man1 directory. Like:
|
|
cp cdrskin/cdrskin.1 /usr/share/man/man1/cdrskin.1
|
|
|
|
Note: The content of the cdrskin tarball is essentially the complete libburn
|
|
of the same version number. You may thus perform above steps in a local
|
|
SVN copy of libburn or in a unpacked libburn tarball as well.
|
|
|
|
|
|
Usage
|
|
|
|
The user of cdrskin needs rw-permission for the CD burner device.
|
|
A list of rw-accessible drives can be obtained by
|
|
|
|
cdrskin --devices
|
|
|
|
CD devices which offer no rw-permission are invisible to normal users.
|
|
The superuser should be able to see any usable drive and then set the
|
|
permissions as needed. If this hangs then there is a drive with
|
|
unexpected problems (locked, busy, broken, whatever). You might have to
|
|
guess the address of your (non-broken) burner by other means, then.
|
|
On Linux 2.4 this would be some /dev/sgN and on 2.6. some /dev/srM or /dev/hdX.
|
|
|
|
The output of cdrskin --devices might look like
|
|
|
|
0 dev='/dev/sr0' rwrwr- : '_NEC' 'DVD_RW ND-4570A'
|
|
1 dev='/dev/sr1' rwrw-- : 'HL-DT-ST' 'DVDRAM GSA-4082B'
|
|
|
|
On Linux, full and insecure enabling of both for everybody would look like
|
|
chmod a+rw /dev/sr0 /dev/hda
|
|
This is equivalent to the traditional setup chmod a+x,u+s cdrecord.
|
|
|
|
On FreeBSD, device rw-permissions are to be set in /etc/devfs.rules.
|
|
On Solaris, pfexec privileges may be restricted to "basic,sys_devices".
|
|
On NetBSD, rw-permission may be granted by chmod a+rw /dev/rcd?d.
|
|
See below "System Dependend Drive Permission Examples".
|
|
|
|
I strongly discourage to run cdrskin with setuid root or via sudo !
|
|
It is not checked for the necessary degree of hacker safety.
|
|
Better consider to grant the necessary permissions to group "floppy"
|
|
and to add users to it.
|
|
|
|
|
|
A behavioral conflict is known between any burn software and demons like hald
|
|
which probe CD drives. This can spoil burn runs for CD-R or CD-RW.
|
|
You may have to keep your hald away from the drive. See for example
|
|
http://www.freebsd.org/gnome/docs/halfaq.html
|
|
|
|
|
|
Helpful with Linux kernel 2.4 is a special SCSI feature:
|
|
It is possible to address a scsi(-emulated) drive via associated device files
|
|
which are not listed by option --devices but point to the same SCSI addresses
|
|
as listed device files. This addressing via e.g. /dev/sr0 or /dev/scd1 is
|
|
compatible with generic read programs like dd and with write program growisofs.
|
|
For finding /dev/sg1 from /dev/sr0, the program needs rw-access to both files.
|
|
|
|
|
|
Usage examples
|
|
|
|
For options and recordable media classes see
|
|
man 1 cdrskin
|
|
|
|
Get an overview of cdrecord style addresses of available devices
|
|
cdrskin -scanbus
|
|
cdrskin dev=ATA -scanbus
|
|
cdrskin --devices
|
|
|
|
Adresses reported with dev=ATA need prefix "ATA:". Address examples:
|
|
dev=0,1,0 dev=ATA:1,0,0 dev=/dev/sg1 dev=/dev/hdc dev=/dev/sr0
|
|
See also "Drive Addressing" below.
|
|
|
|
Obtain some info about the drive
|
|
cdrskin dev=0,1,0 -checkdrive
|
|
|
|
Obtain some info about the drive and the inserted media
|
|
cdrskin dev=0,1,0 -atip -v -minfo
|
|
|
|
Prepare CD-RW or DVD-RW for re-use, DVD-RAM or BD-RE for first use
|
|
cdrskin -v dev=/dev/sg1 blank=as_needed -eject
|
|
|
|
Format DVD-RW to avoid need for blanking before re-use
|
|
cdrskin -v dev=0,1,0 blank=format_overwrite
|
|
|
|
De-format DVD-RW to make it capable of multi-session again
|
|
cdrskin -v dev=/dev/sr0 blank=deformat_sequential
|
|
|
|
Burn image file my_image.iso to media
|
|
cdrskin -v dev=0,1,0 speed=12 fs=8m driveropts=burnfree padsize=300k \
|
|
-eject my_image.iso
|
|
|
|
Write multi-session to the same CD , DVD-R[W] or DVD+R[/DL]
|
|
cdrskin dev=/dev/hdc padsize=300k -multi 1.iso
|
|
cdrskin dev=/dev/hdc padsize=300k -multi 2.iso
|
|
cdrskin dev=/dev/hdc padsize=300k -multi 3.iso
|
|
cdrskin dev=/dev/hdc padsize=300k 4.iso
|
|
|
|
Get multi-session info for option -C of program mkisofs:
|
|
c_values=$(cdrskin dev=/dev/hdc -msinfo 2>/dev/null)
|
|
mkisofs ... -C "$c_values" ...
|
|
|
|
Burn a compressed afio archive to media on-the-fly
|
|
find . | afio -oZ - | cdrskin -v dev=0,1,0 fs=32m speed=8 \
|
|
driveropts=burnfree padsize=300k -
|
|
|
|
Burn 6 audio tracks from files with different formats to CD (not to any DVD).
|
|
Anything except .wav or .au files has to be converted into raw format first.
|
|
See below "Audio CD" for specifications.
|
|
ogg123 -d raw -f track01.cd /path/to/track1.ogg
|
|
oggdec -R -o track02.cd /path/to/track2.ogg
|
|
lame --decode -t /path/to/track3.mp3 track03.cd
|
|
madplay -o raw:track04.cd /path/to/track4.mp3
|
|
mppdec --raw-le /path/to/track5.mpc track05.cd
|
|
|
|
cdrskin -v dev=0,1,0 blank=fast -eject speed=48 -sao \
|
|
-audio -swab track0[1-5].cd /path/to/track6.wav
|
|
|
|
Extract audio tracks and CD-TEXT from CD into directory /home/me/my_cd:
|
|
mkdir /home/me/my_cd
|
|
cdrskin -v dev=/dev/sr0 extract_audio_to=/home/me/my_cd \
|
|
cdtext_to_v07t=/home/me/my_cd/cdtext.v07t
|
|
|
|
|
|
Restrictions
|
|
|
|
Several advanced CD related options of cdrecord are still unsupported.
|
|
See output of command
|
|
cdrskin --list_ignored_options
|
|
If you have use cases for them, please report your wishes and expectations.
|
|
|
|
On the other hand, the capability of multi-session and of writing streams
|
|
of unpredicted length surpass the current DVD capabilities of cdrecord.
|
|
|
|
|
|
Inspiration and Standard
|
|
|
|
cdrskin combines the command line interface standard set by cdrecord with
|
|
libburn, which is a control software for optical drives according to standard
|
|
MMC-5. For particular CD legacy commands, standards MMC-3 and MMC-1 apply.
|
|
|
|
For the original meaning of cdrecord options see :
|
|
man cdrecord
|
|
(http://cdrecord.berlios.de/old/private/man/cdrecord-2.0.html)
|
|
Do not bother Joerg Schilling with any cdrskin problems.
|
|
(Be cursed if you install cdrskin as "cdrecord" without clearly forwarding
|
|
this "don't bother Joerg" demand.)
|
|
|
|
cdrskin does not contain any bytes copied from cdrecord's sources. Many bytes
|
|
have been copied from the message output of cdrecord runs, though. I am
|
|
thankful to Joerg Schilling for every single one of them.
|
|
I have the hope that Joerg feels more flattered than annoyed by cdrskin.
|
|
|
|
Many thanks to Andy Polyakov for his dvd+rw-tools
|
|
http://fy.chalmers.se/~appro/linux/DVD+RW/tools
|
|
which provide me with examples and pointers into MMC specs for DVD writing.
|
|
|
|
|
|
Startup Files
|
|
|
|
If not --no_rc is the first argument then cdrskin attempts on startup to read
|
|
arguments from the following three files:
|
|
/etc/default/cdrskin
|
|
/etc/opt/cdrskin/rc
|
|
/etc/cdrskin/cdrskin.conf
|
|
$HOME/.cdrskinrc
|
|
The files are read in the sequence given above.
|
|
Each readable line is treated as one single argument. No extra blanks.
|
|
A first character '#' marks a comment, empty lines are ignored.
|
|
|
|
Example content of a startup file:
|
|
# This is the default device
|
|
dev=0,1,0
|
|
|
|
# Some more options
|
|
fifo_start_at=0
|
|
fs=16m
|
|
|
|
|
|
Audio CD
|
|
|
|
Lorenzo Taylor enabled option -audio in cdrskin (thanks !) and reports neat
|
|
results with audio data files which are :
|
|
headerless PCM (i.e. uncompressed)
|
|
44100 Hz sampling rate
|
|
16 bits per sample
|
|
stereo (2 channels)
|
|
little-endian byte order with option -swab, or big-endian without -swab
|
|
|
|
Files with name extension .wav get examined wether they are in Microsoft WAVE
|
|
format with above parameters and eventually get extracted by cdrskin itself.
|
|
In the same way files with name extension .au get examined wether they are
|
|
in SUN's audio format. For both formats, track format -audio and eventual
|
|
endianness option -swab are enabled automatically.
|
|
|
|
Any other formats are to be converted to format .wav with above parameters
|
|
or to be extracted as raw CD track data by commands like those given above
|
|
under "Usage examples". Those raw files need option -audio and in most cases
|
|
option -swab to mark them as little-endian/Intel/LSB-first 16-bit data.
|
|
Incorrect endianness setting results in random noise on CD.
|
|
|
|
I myself am not into audio. So libburn-hackers@pykix.org might be the
|
|
best address for suggestions, requests and bug reports.
|
|
|
|
|
|
DVD+RW , DVD-RAM , BD-RE
|
|
|
|
These random access media get treated as blank media regardless wether they
|
|
hold data or not. Options -audio and -multi are not allowed. Only one track
|
|
is allowed. -toc does not return information about the media content.
|
|
Speed is counted in DVD units (i.e. 1x = 1,385,000 bytes/second) or BD units
|
|
(1x = 4,495,625 bytes/second). Currently there is no difference between -sao
|
|
and -tao. If ever, then -tao will be the mode which preserves the current
|
|
behavior.
|
|
|
|
BD-RE media need formatting before first use. cdrskin option "blank=as_needed"
|
|
recognizes unformatted BD-RE and applies a lengthy formatting run.
|
|
|
|
During write operations DVD-RAM and BD-RE automatically apply Defect
|
|
Management. This usually slows them down to half nominal speed. If drive
|
|
and media produce flawless results anyway, then one can try to reach full
|
|
nominal speed by option "stream_recording=on".
|
|
In this case bad blocks are not detected during write and not even previously
|
|
known bad blocks are avoided. So you have to make your own readability tests
|
|
and go back to half speed as soon as the first read errors show up.
|
|
Instead of "on" one may also set a start address for stream recording.
|
|
Like "stream_recording=100m". This will write slowly to the first 100 MB of
|
|
the media and accelerate when writing to higher addresses.
|
|
|
|
Option --grow_overwriteable_iso allows -multi (although unneeded), enables
|
|
-msinfo and -toc, and makes blank=fast an invalidator for ISO filesystems
|
|
on overwriteable media.
|
|
|
|
Initial session (equivalent to growisofs -Z):
|
|
mkisofs ... | cdrskin --grow_overwriteable_iso blank=fast ...
|
|
|
|
Add-on session (equivalent to growisofs -M):
|
|
cparms=$(cdrskin dev=/dev/sr0 --grow_overwriteable_iso -msinfo)
|
|
mkisofs -C "$cparms" -M /dev/sr0 ... | \
|
|
cdrskin dev=/dev/sr0 --grow_overwriteable_iso ... -
|
|
|
|
|
|
DVD-RW , DVD-R , DVD-R DL
|
|
|
|
DVD-RW are usable if formatted to state "Restricted Overwrite" or if in state
|
|
"Sequential Recording". DVD-R are always in sequential state. DVD-R DL are
|
|
always sequential and incapable of multi-session.
|
|
|
|
"Sequential" is the state of unused media and of media previously blanked
|
|
or written by cdrecord. dvd+rw-format -blank can also achieve this state.
|
|
The according cdrskin option is blank=deformat_sequential .
|
|
If "Incremental Streaming" is available, then sequential media are capable
|
|
of multi-session like CD-R[W]. (But not capable of -audio recording.)
|
|
This means they need option -multi to stay appendable, need to be blanked
|
|
to be writeable from start, return useable info with -toc and -msinfo,
|
|
eventually perform appending automatically.
|
|
Without Incremental Streaming offered by the drive, only write mode DAO is
|
|
available with sequential DVD-R[W]. It only works with blank media, allows only
|
|
one single track, no -multi, and demands a fixely predicted track size.
|
|
(growisofs uses it with DVD-R[W] if option -dvd-compat is given.)
|
|
|
|
Overwriteable DVD-RW behave much like DVD+RW. "Restricted" refers only to the
|
|
granularity of random access and block size which have always to be aligned to
|
|
full 32 kB. Sequential DVD-RW are converted into overwriteable DVD-RW by
|
|
cdrskin dev=... -v blank=format_overwrite
|
|
(Command dvd+rw-format -force can achieve Restricted Overwrite, too.)
|
|
|
|
Formatting or first use of freshly formatted DVD-RW can produce unusual noises
|
|
from the drive and last several minutes. Depending on mutual compatibility of
|
|
drive and media, formatting can yield unusable media. It seems that those die
|
|
too on blanking by cdrecord, dvd+rw-format or cdrskin. Perils of DVD-RW.
|
|
|
|
There are three DVD-RW formatting variants with cdrskin currently:
|
|
|
|
blank=format_overwrite uses "DVD-RW Quick" formatting (MMC-type 15h)
|
|
and writes a first session of 128 MiB. This leads to media which are expandable
|
|
and random addressable by cdrskin.
|
|
|
|
blank=format_overwrite_quickest uses "DVD-RW Quick" formatting (type 15h) too,
|
|
but leaves the media in "intermediate" state. In the first session of writing
|
|
one may only write sequentially to such a DVD. After that, it gets random
|
|
addressable by cdrskin. DVD-ROM drives might show ill behavior with them.
|
|
|
|
blank=format_overwrite_full uses preferably "Full Format" (type 00h).
|
|
This formatting lasts as long as writing a full DVD. It includes writing of
|
|
lead-out which is said to be good for DVD ROM compatibility.
|
|
|
|
De-formatting options are available to make overwriteable DVD-RW sequential:
|
|
|
|
blank=deformat_sequential performs thorough blanking of all states of DVD-RW.
|
|
blank=all and blank=fast perform the same thorough blanking, but refuse to do
|
|
this with overwriteable DVD-RW, thus preserving their formatting. The specs
|
|
allow minimal blanking but the resulting media on my drives offer no
|
|
Incremental Streaming afterwards. So blank=fast will do full blanking.
|
|
|
|
blank=deformat_sequential_quickest is faster but might yield DAO-only media.
|
|
|
|
|
|
DVD+R , DVD+R DL , BD-R
|
|
|
|
From the view of cdrskin they behave much like DVD-R. Each track gets wrapped
|
|
into an own session, though.
|
|
|
|
DVD+R DL appear as extra large DVD+R. cdrskin does not allow to set the address
|
|
of the layer break where a reading drive might show some delay while switching
|
|
between both media layers.
|
|
|
|
BD-R are sold unformatted blank. If used without initial formatting then the
|
|
drive is supposed to format them to maximum payload size with no Defect
|
|
Management (see also above with BD-RE).
|
|
If Defect Management is desired then BD-R need to be formatted before the
|
|
first attempt to write a session to them.
|
|
blank=format_if_needed will detect the situation and eventually apply
|
|
default sized Defect Management formatting.
|
|
blank=format_defectmgt_* will apply non-default parameters to formatting.
|
|
|
|
|
|
Emulated Drives
|
|
|
|
cdrskin can use filesystem objects as emulated drives. Regular files or block
|
|
devices appear similar to DVD-RAM. Other file types resemble blank DVD-R.
|
|
Necessary precondition is option --allow_emulated_drives which is not accepted
|
|
if cdrskin took another user identity because of the setuid bit of its access
|
|
permissions.
|
|
Addresses of emulated drives begin with prefix "stdio:". E.g.
|
|
dev=stdio:/tmp/my_pseudo_drive
|
|
|
|
For safety reasons the superuser is only allowed to use /dev/null as emulated
|
|
drive. See man page section FILES for a way to lift that ban.
|
|
|
|
|
|
------------------------------------------------------------------------------
|
|
|
|
Special compilation variations
|
|
|
|
All following options of ./configure and cdrskin/compile_cdrskin.sh are
|
|
combinable. After runs of ./configure do as next:
|
|
make clean ; make
|
|
|
|
In some situations Linux may deliver a better write performance to drives if
|
|
the track input is read with O_DIRECT (see man 2 open). The API call
|
|
burn_os_open_track_src() and the input readers of cdrskin and libburn fifo
|
|
can be told to use this peculiar read mode by:
|
|
--enable-track-src-odirect
|
|
|
|
But often cdrskin option dvd_obs=64k will yield even better performance in
|
|
such a situation. 64k can be made default at compile time by
|
|
cdrskin/compile_cdrskin.sh -dvd_obs_64k
|
|
It can also be enabled at configure time by
|
|
./configure ... --enable-dvd-obs-64k ...
|
|
|
|
Alternatively the transport of SCSI commands can be done via libcdio-0.83.
|
|
You may install it and re-run libburn's ./configure with option
|
|
--enable-libcdio
|
|
Add option
|
|
-use_libcdio
|
|
to your run of cdrskin/compile_cdrskin.sh .
|
|
|
|
You may get a (super fat) statically linked binary by :
|
|
cdrskin/compile_cdrskin.sh -static
|
|
if your system supports static linking, at all. This will not help with kernels
|
|
which do not properly support the necessary low-level interfaces chosen by
|
|
your compile-time libraries.
|
|
|
|
A size reduced but fully functional binary may be produced by
|
|
cdrskin/compile_cdrskin.sh -do_strip
|
|
|
|
An extra lean binary with reduced capabilities is created by
|
|
cdrskin/compile_cdrskin.sh -do_diet -do_strip
|
|
It will not read startup files, will abort on option dev_translation= ,
|
|
will not have a fifo buffer, and will not be able to put out help texts or
|
|
debugging messages.
|
|
|
|
|
|
Linux only:
|
|
|
|
libburn tries to avoid a collision with udev's drive examination by waiting
|
|
0.1 seconds before opening the device file for a longer time, after udev
|
|
might have been alarmed by drive scanning activities.
|
|
The waiting time can be set at ./configure time with microsecond granularity.
|
|
E.g. 2 seconds:
|
|
CFLAGS="$CFLAGS -DLibburn_udev_wait_useC=2000000"
|
|
./configure ...options...
|
|
Waiting can be disabled by zero waiting time:
|
|
CFLAGS="$CFLAGS -DLibburn_udev_wait_useC=0"
|
|
Alternatively, libburn can try to be nice by opening the device file,
|
|
closing it immediately, waiting, and only then opening it for real:
|
|
CFLAGS="$CFLAGS -DLibburn_udev_extra_open_cyclE -DLibburn_udev_wait_useC=500000"
|
|
|
|
------------------------------------------------------------------------------
|
|
|
|
System Dependend Drive Permission Examples
|
|
|
|
Accessing the optical drives requires privileges which usually are granted
|
|
only to the superuser. Linux, FreeBSD, Solaris, NetBSD, offer quite different
|
|
approaches for avoiding the need for unrestricted privileges.
|
|
|
|
First check whether some friendly system setting already allows you to
|
|
access the drives as normal user:
|
|
cdrskin --devices
|
|
Those drives of which you see address and type strings are already usable.
|
|
|
|
If there remain drives invisible which the superuser can see by the same
|
|
command, then the following examples might help:
|
|
|
|
---------------
|
|
On all systems:
|
|
---------------
|
|
Add the authorized users of CD drives to group "floppy" in /etc/group.
|
|
If missing: create this group.
|
|
Changes to /etc/group often only affect new login sessions. So log out and in
|
|
before making the first tests.
|
|
|
|
---------
|
|
On Linux:
|
|
---------
|
|
Allow rw-access to the drives
|
|
chgrp floppy /dev/sr0 /dev/sr1
|
|
chmod g+rw /dev/sr0 /dev/sr1
|
|
It might be necessary to perform chgrp and chmod after each reboot or to
|
|
edit distro dependent device configuration files for permanent settings.
|
|
|
|
-----------
|
|
On FreeBSD:
|
|
-----------
|
|
Edit /etc/devfs.rules and make sure to have these lines
|
|
[localrules=10]
|
|
add path 'acd*' mode 0664 group floppy
|
|
add path 'cd*' mode 0664 group floppy
|
|
add path 'pass*' mode 0664 group floppy
|
|
add path 'xpt*' mode 0664 group floppy
|
|
[localrules=5]
|
|
add path 'pass*' mode 0664 group floppy
|
|
add path 'cd*' mode 0664 group floppy
|
|
add path 'xpt*' mode 0664 group floppy
|
|
add path 'acd*' mode 0664 group floppy
|
|
|
|
Edit /etc/rc.conf and add the following line if missing
|
|
devfs_system_ruleset="localrules"
|
|
|
|
This gets into effect by reboot or by command
|
|
/etc/rc.d/devfs start
|
|
|
|
-----------
|
|
On Solaris:
|
|
-----------
|
|
Run cdrskin by
|
|
pfexec cdrskin ...arguments...
|
|
|
|
The following settings will make pfexec keep original UID and EUID and prevent
|
|
most superuser powers. Be aware that you still can manipulate all device files
|
|
if you have the file permissions for that.
|
|
Full root privileges for cdrskin can then be acquired only by command su.
|
|
|
|
Edit /etc/security/exec_attr and add this line to the other "Media Backup"
|
|
lines:
|
|
Media Backup:solaris:cmd:::/usr/local/bin/cdrskin:privs=basic,sys_devices
|
|
Edit /etc/user_attr and add profile "Media Backup" to the user's line:
|
|
thomas::::profiles=Media Backup,Primary Administrator;roles=root
|
|
See also man privileges, man exec_attr, man user_attr.
|
|
|
|
Then allow the group r-access to the drives
|
|
pfexec chgrp floppy /dev/rdsk/c3t0d0s2 /dev/rdsk/c4t0d0s2
|
|
pfexec chmod g+r /dev/rdsk/c3t0d0s2 /dev/rdsk/c4t0d0s2
|
|
The last two commands have to be executed after each boot. I do not know
|
|
the relevant device configuration files yet.
|
|
|
|
----------
|
|
On NetBSD:
|
|
----------
|
|
Allow rw-access to the drives
|
|
chgrp floppy /dev/rcd[01]d
|
|
chmod g+rw /dev/rcd[01]d
|
|
|
|
------------------------------------------------------------------------------
|
|
Project aspects and legal stuff
|
|
------------------------------------------------------------------------------
|
|
|
|
Important Disclaimer :
|
|
|
|
This software is provided as is. There is no warranty implied and no
|
|
protection against possible damages. You use this on your own risk.
|
|
Don't blame me or other authors of libburn if anything goes wrong.
|
|
|
|
Actually, in case of severe trouble, nearly always the drive and the media
|
|
are the cause. Any mistake of the burn program is supposed to be caught
|
|
by the drive's firmware and to lead to mere misburns.
|
|
The worst mishaps which hit the author imposed the need to reboot the
|
|
system because of drives gnawing endlessly on ill media. Permanent hardware
|
|
damage did not occur in 3.5 years of development. But one never knows ...
|
|
|
|
------------------------------------------------------------------------------
|
|
|
|
Interested users are invited to participate in the development of cdrskin.
|
|
Contact: scdbackup@gmx.net or libburn-hackers@pykix.org .
|
|
We will keep copyright narrow but will of course acknowledge valuable
|
|
contributions in a due way.
|
|
|
|
------------------------------------------------------------------------------
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License version 2 or later
|
|
as published by the Free Software Foundation.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
|
|
------------------------------------------------------------------------------
|
|
Based on and sub project of:
|
|
libburnia-project.org
|
|
By Mario Danic <mario.danic@gmail.com> and Thomas Schmitt <scdbackup@gmx.net>
|
|
Copyright (C) 2006-2014 Mario Danic, Thomas Schmitt
|
|
|
|
libburnia-project.org is inspired by and in other components still containing
|
|
parts of
|
|
Libburn. By Derek Foreman <derek@signalmarketing.com> and
|
|
Ben Jansens <xor@orodu.net>
|
|
Copyright (C) 2002-2006 Derek Foreman and Ben Jansens
|
|
See toplevel README for an overview of the current copyright situation in
|
|
libburnia-project.org.
|
|
|
|
|