------------------------------------------------------------------------------ libburnia-project.org scdbackup.sourceforge.net/cdrskin_eng.html ------------------------------------------------------------------------------ cdrskin. By Thomas Schmitt <scdbackup@gmx.net> Integrated sub project of libburnia-project.org but also published via: http://scdbackup.sourceforge.net/cdrskin_eng.html http://scdbackup.sourceforge.net/cdrskin-0.4.3.tar.gz Copyright (C) 2006-2008 Thomas Schmitt, provided under GPL version 2. ------------------------------------------------------------------------------ cdrskin is a limited cdrecord compatibility wrapper which allows to use most of the libburn features from the command line. Currently it is only supported on Linux with kernels >= 2.4. By using this software you agree to the disclaimer at the end of this text "This software is provided as is. There is no warranty implied and ..." Compilation, First Glimpse, Installation Obtain cdrskin-0.4.3.tar.gz, take it to a directory of your choice and do: tar xzf cdrskin-0.4.3.tar.gz cd cdrskin-0.4.3 Within that directory execute: ./configure --prefix=/usr make This will already produce a cdrskin binary. But it will be necessary to install libburn in order to use this binary. Installation of libburn is beyond the scope of cdrskin. For this, see included libburn docs. In order to surely get a standalone binary, execute cdrskin/compile_cdrskin.sh Version identification and help texts available afterwards: cdrskin/cdrskin -version cdrskin/cdrskin --help cdrskin/cdrskin -help man cdrskin/cdrskin.1 Install (eventually as superuser) cdrskin to a directory where it can be found: The command for global installation of both, libburn and cdrskin is make install If the library libburn.so.4 is not found with a test run of cdrskin, then try whether command ldconfig makes it accessible. With the statically linked binary this should not matter. You may as well do the few necessary actions manually. If cdrskin was already installed by a previous version, or by "make install" in the course of this installation, then find out where: which cdrskin Copy your standalone binary to exactly the address which you get as reply. E.g.: cp cdrskin/cdrskin /usr/bin/cdrskin Check the version timestamps of the globally installed binary cdrskin -version It is not necessary for the standalone cdrskin binary to have libburn installed, since it incorporates the necessary libburn parts at compile time. It will not collide with an installed version of libburn either. But libpthread must be installed on the system and glibc has to match. (See below for a way to create a statically linked binary.) To install the man page, you may do: echo $MANPATH and choose one of the listed directories to copy the man-page under its ./man1 directory. Like: cp cdrskin/cdrskin.1 /usr/share/man/man1/cdrskin.1 Note: The content of the cdrskin tarball is essentially the complete libburn of the same version number. You may thus perform above steps in a local SVN copy of libburn or in a unpacked libburn tarball as well. Usage The user of cdrskin needs rw-permission for the CD burner device. A list of rw-accessible drives can be obtained by cdrskin --devices CD devices which offer no rw-permission are invisible to normal users. The superuser should be able to see any usable drive and then set the permissions as needed. If this hangs then there is a drive with unexpected problems (locked, busy, broken, whatever). You might have to guess the address of your (non-broken) burner by other means, then. On Linux 2.4 this would be some /dev/sgN and on 2.6. some /dev/srM or /dev/hdX. The output of cdrskin --devices might look like 0 dev='/dev/sr0' rwrwr- : '_NEC' 'DVD_RW ND-4570A' 1 dev='/dev/sr1' rwrw-- : 'HL-DT-ST' 'DVDRAM GSA-4082B' So full and insecure enabling of both for everybody would look like chmod a+rw /dev/sr0 /dev/sr1 This is equivalent to the traditional setup chmod a+x,u+s cdrecord. I strongly discourage to run cdrskin with setuid root or via sudo ! It is not checked for the necessary degree of hacker safety. Consider to put all authorized users into group "floppy", to chgrp the device file to that group and to disallow w-access to others. Helpful with Linux kernel 2.4 is a special SCSI feature: It is possible to address a scsi(-emulated) drive via associated device files which are not listed by option --devices but point to the same SCSI addresses as listed device files. This addressing via e.g. /dev/sr0 or /dev/scd1 is compatible with generic read programs like dd and with write program growisofs. For finding /dev/sg1 from /dev/sr0, the program needs rw-access to both files. Usage examples For options and recordable media classes see man 1 cdrskin Get an overview of cdrecord style addresses of available devices cdrskin -scanbus cdrskin dev=ATA -scanbus cdrskin --devices Adresses reported with dev=ATA need prefix "ATA:". Address examples: dev=0,1,0 dev=ATA:1,0,0 dev=/dev/sg1 dev=/dev/hdc dev=/dev/sr0 See also "Drive Addressing" below. Obtain some info about the drive cdrskin dev=0,1,0 -checkdrive Obtain some info about the drive and the inserted media cdrskin dev=0,1,0 -atip -v Make used CD-RW or used unformatted DVD-RW writeable again cdrskin -v dev=0,1,0 blank=fast -eject Format DVD-RW to avoid need for blanking before re-use cdrskin -v dev=0,1,0 blank=format_overwrite De-format DVD-RW to make it capable of multi-session again cdrskin -v dev=/dev/sr0 blank=deformat_sequential Burn image file my_image.iso to media cdrskin -v dev=0,1,0 speed=12 fs=8m driveropts=burnfree padsize=300k \ -eject my_image.iso Write multi-session to the same CD , DVD-R[W] or DVD+R cdrskin dev=/dev/hdc padsize=300k -multi 1.iso cdrskin dev=/dev/hdc padsize=300k -multi -tao 2.iso cdrskin dev=/dev/hdc padsize=300k -multi -tao 3.iso cdrskin dev=/dev/hdc padsize=300k -tao 4.iso Get multi-session info for option -C of program mkisofs: c_values=$(cdrskin dev=/dev/hdc -msinfo 2>/dev/null) mkisofs ... -C "$c_values" ... Burn a compressed afio archive to media on-the-fly find . | afio -oZ - | cdrskin -v dev=0,1,0 fs=32m speed=8 -tao \ driveropts=burnfree padsize=300k - Burn 6 audio tracks from files with different formats to CD (not to any DVD). Anything except .wav or .au files has to be converted into raw format first. See below "Audio CD" for specifications. ogg123 -d raw -f track01.cd /path/to/track1.ogg oggdec -R -o track02.cd /path/to/track2.ogg lame --decode -t /path/to/track3.mp3 track03.cd madplay -o raw:track04.cd /path/to/track4.mp3 mppdec --raw-le /path/to/track5.mpc track05.cd cdrskin -v dev=0,1,0 blank=fast -eject speed=48 -sao \ -audio -swab track0[1-5].cd /path/to/track6.wav Restrictions Several advanced CD related options of cdrecord are still unsupported. See output of command cdrskin --list_ignored_options If you have use cases for them, please report your wishes and expectations. DVD support is restricted to single layer DVD for now. Double layer media are implemented but untested. On the other hand, the capability of multi-session and of writing streams of unpredicted lenght surpass the current DVD capabilities of cdrecord. Inspiration and Standard cdrskin combines the command line interface standard set by cdrecord with libburn, which is a control software for optical drives according to standard MMC-5. For particular CD legacy commands, standards MMC-3 and MMC-1 apply. For the original meaning of cdrecord options see : man cdrecord (http://cdrecord.berlios.de/old/private/man/cdrecord-2.0.html) Do not bother Joerg Schilling with any cdrskin problems. (Be cursed if you install cdrskin as "cdrecord" without clearly forwarding this "don't bother Joerg" demand.) cdrskin does not contain any bytes copied from cdrecord's sources. Many bytes have been copied from the message output of cdrecord runs, though. I am thankful to Joerg Schilling for every single one of them. I have the hope that Joerg feels more flattered than annoyed by cdrskin. Many thanks to Andy Polyakov for his dvd+rw-tools http://fy.chalmers.se/~appro/linux/DVD+RW/tools which provide me with examples and pointers into MMC specs for DVD writing. Startup Files If not --no_rc is the first argument then cdrskin attempts on startup to read arguments from the following three files: /etc/default/cdrskin /etc/opt/cdrskin/rc /etc/cdrskin/cdrskin.conf $HOME/.cdrskinrc The files are read in the sequence given above. Each readable line is treated as one single argument. No extra blanks. A first character '#' marks a comment, empty lines are ignored. Example content of a startup file: # This is the default device dev=0,1,0 # Some more options fifo_start_at=0 fs=16m Audio CD Lorenzo Taylor enabled option -audio in cdrskin (thanks !) and reports neat results with audio data files which are : headerless PCM (i.e. uncompressed) 44100 Hz sampling rate 16 bits per sample stereo (2 channels) little-endian byte order with option -swab, or big-endian without -swab Files with name extension .wav get examined wether they are in Microsoft WAVE format with above parameters and eventually get extracted by cdrskin itself. In the same way files with name extension .au get examined wether they are in SUN's audio format. For both formats, track format -audio and eventual endianness option -swab are enabled automatically. Any other formats are to be converted to format .wav with above parameters or to be extracted as raw CD track data by commands like those given above under "Usage examples". Those raw files need option -audio and in most cases option -swab to mark them as little-endian/Intel/LSB-first 16-bit data. Incorrect endianness setting results in random noise on CD. I myself am not into audio. So libburn-hackers@pykix.org might be the best address for suggestions, requests and bug reports. DVD+RW and DVD-RAM DVD+RW and DVD-RAM media get treated as blank media regardless wether they hold data or not. Options -audio and -multi are not allowed. Only one track is allowed. -toc does not return information about the media content. Speed is counted in DVD units (i.e. 1x = 1,385,000 bytes/second). Currently there is no difference between -sao and -tao. If ever, then -tao will be the mode which preserves the current behavior. Program growisofs can append to an ISO filesystem on DVD+RW by additionally manipulating the first session. Meanwhile cdrskin can do the same. Option --grow_overwriteable_iso allows -multi (although unneeded), enables -msinfo and -toc, and makes blank=fast an invalidator for ISO filesystems on overwriteable media. Initial session (equivalent to growisofs -Z): mkisofs ... | cdrskin --grow_overwriteable_iso blank=fast ... Add-on session (equivalent to growisofs -M): cparms=$(cdrskin dev=/dev/sr0 --grow_overwriteable_iso -msinfo) mkisofs -C "$cparms" -M /dev/sr0 ... | \ cdrskin dev=/dev/sr0 --grow_overwriteable_iso ... - DVD-RW and DVD-R DVD-RW are usable if formatted to state "Restricted Overwrite" or if in state "Sequential Recording". DVD-R are always in sequential state. "Sequential" is the state of unused media and of media previously blanked or written by cdrecord. dvd+rw-format -blank can also achieve this state. The according cdrskin option is blank=deformat_sequential . If "Incremental Streaming" is available, then sequential media are capable of multi-session like CD-R[W]. (But not capable of -audio recording.) This means they need option -multi to stay appendable, need to be blanked to be writeable from start, return useable info with -toc and -msinfo, eventually perform appending automatically. Without Incremental Streaming offered by the drive, only write mode DAO is available with sequential DVD-R[W]. It only works with blank media, allows only one single track, no -multi, and demands a fixely predicted track size. (growisofs uses it with DVD-R[W] if option -dvd-compat is given.) Overwriteable DVD-RW behave much like DVD+RW. "Restricted" refers only to the granularity of random access and block size which have always to be aligned to full 32 kB. Sequential DVD-RW are converted into overwriteable DVD-RW by cdrskin dev=... -v blank=format_overwrite (Command dvd+rw-format -force can achieve Restricted Overwrite, too.) Formatting or first use of freshly formatted DVD-RW can produce unusual noises from the drive and last several minutes. Depending on mutual compatibility of drive and media, formatting can yield unusable media. It seems that those die too on blanking by cdrecord, dvd+rw-format or cdrskin. Perils of DVD-RW. There are three DVD-RW formatting variants with cdrskin currently: blank=format_overwrite uses "DVD-RW Quick" formatting (MMC-type 15h) and writes a first session of 128 MiB. This leads to media which are expandable and random addressable by cdrskin. blank=format_overwrite_quickest uses "DVD-RW Quick" formatting (type 15h) too, but leaves the media in "intermediate" state. In the first session of writing one may only write sequentially to such a DVD. After that, it gets random addressable by cdrskin. DVD-ROM drives might show ill behavior with them. blank=format_overwrite_full uses preferrably "Full Format" (type 00h). This formatting lasts as long as writing a full DVD. It includes writing of lead-out which is said to be good for DVD ROM compatibility. De-formatting options are available to make overwriteable DVD-RW sequential: blank=deformat_sequential performs thorough blanking of all states of DVD-RW. blank=all and blank=fast perform the same thorough blanking, but refuse to do this with overwriteable DVD-RW, thus preserving their formatting. The specs allow minimal blanking but the resulting media on my drives offer no Incremental Streaming afterwards. So blank=fast will do full blanking. blank=deformat_sequential_quickest is faster but might yield DAO-only media. DVD+R From the view of cdrskin they behave much like DVD-R. Each track gets wrapped into an own session, though. Emulated Drives cdrskin can use filesystem objects as emulated drives. Regular files or block devices appear similar to DVD-RAM. Other file types resemble blank DVD-R. Necessary precondition is option --allow_emulated_drives which is not accepted if cdrskin took another user identity because of the setuid bit of its access permissions. Addresses of emulated drives begin with prefix "stdio:". E.g. dev=stdio:/tmp/my_pseudo_drive For safety reasons the superuser is only allowed to use /dev/null as emulated drive. See man page section FILES for a way to lift that ban. ------------------------------------------------------------------------------ Special compilation variations You may get a (super fat) statically linked binary by : cdrskin/compile_cdrskin.sh -static if your system supports static linking, at all. This will not help with kernels which do not properly support the necessary low-level interfaces chosen by your compile-time libraries. A size reduced but fully functional binary may be produced by cdrskin/compile_cdrskin.sh -do_strip An extra lean binary with reduced capabilities is created by cdrskin/compile_cdrskin.sh -do_diet -do_strip It will not read startup files, will abort on option dev_translation= , will not have a fifo buffer, and will not be able to put out help texts or debugging messages. ------------------------------------------------------------------------------ Project aspects and legal stuff ------------------------------------------------------------------------------ Important Disclaimer : This software is provided as is. There is no warranty implied and no protection against possible damages. You use this on your own risk. Don't blame me or other authors of libburn if anything goes wrong. Actually, in case of severe trouble, nearly always the drive and the media are the cause. Any mistake of the burn program is supposed to be caught by the drive's firmware and to lead to mere misburns. The worst mishaps which hit the author implied the need to reboot the system because of drives gnawing endlessly on ill media. Permanent hardware damage did not occur in 1.5 years of development. ------------------------------------------------------------------------------ Interested users are invited to participate in the development of cdrskin. Contact: scdbackup@gmx.net or libburn-hackers@pykix.org . We will keep copyright narrow but will of course acknowledge valuable contributions in a due way. ------------------------------------------------------------------------------ This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License version 2 as published by the Free Software Foundation. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ------------------------------------------------------------------------------ Based on and sub project of: libburnia-project.org By Mario Danic <mario.danic@gmail.com> and Thomas Schmitt <scdbackup@gmx.net> Copyright (C) 2006-2008 Mario Danic, Thomas Schmitt libburnia-project.org is inspired by and in other components still containing parts of Libburn. By Derek Foreman <derek@signalmarketing.com> and Ben Jansens <xor@orodu.net> Copyright (C) 2002-2006 Derek Foreman and Ben Jansens See toplevel README for an overview of the current copyright situation in libburnia-project.org. ------------------------------------------------------------------------------ cdrskin is currently copyright Thomas Schmitt only. It adopts the following commitment by the toplevel copyright holders: ------------------------------------------------------------------------------ We, the copyright holders, agree on the interpretation that dynamical linking of our libraries constitutes "use of" and not "derivation from" our work in the sense of GPL, provided those libraries are compiled from our unaltered code. Thus you may link our libraries dynamically with applications which are not under GPL. You may distribute our libraries and application tools in binary form, if you fulfill the usual condition of GPL to offer a copy of the source code -altered or unaltered- under GPL. We ask you politely to use our work in open source spirit and with the due reference to the entire open source community. If there should really arise the case where above clarification does not suffice to fulfill a clear and neat request in open source spirit that would otherwise be declined for mere formal reasons, only in that case we will duely consider to issue a special license covering only that special case. It is the open source idea of responsible freedom which will be decisive and you will have to prove that you exhausted all own means to qualify for GPL. For now we are firmly committed to maintain one single license: GPL. signed for cdrskin: Thomas Schmitt