sg-libcdio.c 26.8 KB
Newer Older
1 2
/* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */

3 4 5 6 7 8
/*
   Copyright (c) 2010 Thomas Schmitt <scdbackup@gmx.net>
   Provided under GPL version 2 or later.
*/


9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
/*

This is the main operating system dependent SCSI part of libburn. It implements
the transport level aspects of SCSI control and command i/o.

Present implementation: GNU libcdio , for X/Open compliant operating systems


PORTING:

Porting libburn typically will consist of adding a new operating system case
to the following switcher files:
  os.h    Operating system specific libburn definitions and declarations.
  sg.c    Operating system dependent transport level modules.
and of deriving the following system specific files from existing examples:
  os-*.h  Included by os.h. You will need some general system knowledge
          about signals and knowledge about the storage object needs of your
          transport level module sg-*.c.

  sg-*.c  This source module. You will need special system knowledge about
          how to detect all potentially available drives, how to open them,
          eventually how to exclusively reserve them, how to perform
          SCSI transactions, how to inquire the (pseudo-)SCSI driver.
          You will not need to care about CD burning, MMC or other high-level
          SCSI aspects.

Said sg-*.c operations are defined by a public function interface, which has
to be implemented in a way that provides libburn with the desired services:
37

38 39 40 41
sg_id_string()          returns an id string of the SCSI transport adapter.
                        It may be called before initialization but then may
                        return only a preliminary id.

42 43 44 45
sg_initialize()         performs global initialization of the SCSI transport
                        adapter and eventually needed operating system
                        facilities. Checks for compatibility of supporting
                        software components.
46 47 48 49

sg_shutdown()           performs global finalizations and releases golbally
                        aquired resources.

50 51 52 53 54 55
sg_give_next_adr()      iterates over the set of potentially useful drive 
                        address strings.

scsi_enumerate_drives() brings all available, not-whitelist-banned, and
                        accessible drives into libburn's list of drives.

56 57 58 59
sg_dispose_drive()      finalizes adapter specifics of struct burn_drive
                        on destruction. Releases resources which were aquired
                        underneath scsi_enumerate_drives().
 
60 61 62 63 64 65 66 67 68 69 70 71 72
sg_drive_is_open()      tells wether libburn has the given drive in use.

sg_grab()               opens the drive for SCSI commands and ensures
                        undisturbed access.

sg_release()            closes a drive opened by sg_grab()

sg_issue_command()      sends a SCSI command to the drive, receives reply,
                        and evaluates wether the command succeeded or shall
                        be retried or finally failed.

sg_obtain_scsi_adr()    tries to obtain SCSI address parameters.

73 74 75 76 77 78

burn_os_is_2k_seekrw()  tells whether the given path leads to a file object
                        that can be used in 2 kB granularity by lseek(2),
                        read(2), and possibly write(2) if not read-only..
                        E.g. a USB stick or a hard disk.

79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96
burn_os_stdio_capacity()  estimates the emulated media space of stdio-drives.

burn_os_open_track_src()  opens a disk file in a way that allows best
                        throughput with file reading and/or SCSI write command
                        transmission.

burn_os_alloc_buffer()  allocates a memory area that is suitable for file
                        descriptors issued by burn_os_open_track_src().
                        The buffer size may be rounded up for alignment
                        reasons.

burn_os_free_buffer()   delete a buffer obtained by burn_os_alloc_buffer().

Porting hints are marked by the text "PORTING:".
Send feedback to libburn-hackers@pykix.org .

*/

97 98 99 100
#ifdef HAVE_CONFIG_H
#include "../config.h"
#endif

101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116

/** PORTING : ------- OS dependent headers and definitions ------ */

#include <unistd.h>
#include <stdio.h>
#include <sys/types.h>
#include <errno.h>
#include <fcntl.h>
#include <sys/stat.h>
#include <string.h>
#include <stdlib.h>

#ifdef Libburn_os_has_statvfS
#include <sys/statvfs.h>
#endif /* Libburn_os_has_stavtfS */

117 118 119 120 121
#ifdef __linux
/* for ioctl(BLKGETSIZE) */
#include <sys/ioctl.h>
#include <linux/fs.h>
#endif
122

123
#ifdef __FreeBSD__
124
#define Libburn_is_on_freebsD 1
125 126
#endif
#ifdef __FreeBSD_kernel__
127
#define Libburn_is_on_freebsD 1
128
#endif
129 130 131 132 133 134 135 136
#ifdef Libburn_is_on_freebsD
/* To avoid ATAPI devices */
#define Libburn_guess_freebsd_atapi_devicE 1
/* To obtain size of disk-like devices */
#include <sys/disk.h> /* DIOCGMEDIASIZE */
#endif /* Libburn_is_on_freebsD */

#define Libburn_guess_freebsd_atapi_devicE 1
137

138 139 140 141 142 143 144
#ifdef sun
#define Libburn_is_on_solariS 1
#endif
#ifdef __sun
#define Libburn_is_on_solariS 1
#endif

145
#include <cdio/cdio.h>
146
#include <cdio/logging.h>
147 148 149
#include <cdio/mmc.h>


150 151 152 153 154 155 156 157
/* The waiting time before eventually retrying a failed SCSI command.
   Before each retry wait Libburn_sg_linux_retry_incR longer than with
   the previous one.
*/
#define Libburn_sg_libcdio_retry_usleeP 100000
#define Libburn_sg_libcdio_retry_incR   100000


158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177
/** PORTING : ------ libburn portable headers and definitions ----- */

#include "transport.h"
#include "drive.h"
#include "sg.h"
#include "spc.h"
/* collides with symbols of <cdio/mmc.h>
 #include "mmc.h"
*/
#include "sbc.h"
#include "debug.h"
#include "toc.h"
#include "util.h"

#include "libdax_msgs.h"
extern struct libdax_msgs *libdax_messenger;


/* is in portable part of libburn */
int burn_drive_is_banned(char *device_address);
178 179
int burn_drive_resolve_link(char *path, char adr[],
			 int *recursion_count, int flag); /* drive.c */
180 181 182 183 184 185 186 187 188

/* Whether to log SCSI commands:
   bit0= log in /tmp/libburn_sg_command_log
   bit1= log to stderr
   bit2= flush every line
*/
extern int burn_sg_log_scsi;


189 190 191 192 193 194 195 196 197 198 199 200
/* ------------------------------------------------------------------------ */
/* PORTING:   Private definitions. Port only if needed by public functions. */
/*            (Public functions are listed below)                           */
/* ------------------------------------------------------------------------ */


/* Storage object is in libburn/init.c
   whether to strive for exclusive access to the drive
*/
extern int burn_sg_open_o_excl;


201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219
/* ------------------------------------------------------------------------ */
/* PORTING: Private functions. Port only if needed by public functions      */
/*          (Public functions are listed below)                             */
/* ------------------------------------------------------------------------ */


static int sg_close_drive(struct burn_drive * d)
{
	CdIo_t *p_cdio;

	if (d->p_cdio != NULL) {
		p_cdio = (CdIo_t *) d->p_cdio;
		cdio_destroy(p_cdio);
		d->p_cdio = NULL;
	}
	return 0;
}


220 221 222
static int sg_give_next_adr_raw(burn_drive_enumerator_t *idx,
				     char adr[], int adr_size, int initialize)
{
223 224 225
	char **pos;
	int count = 0;

226 227 228 229 230
	if (initialize == 1) {
		idx->pos = idx->ppsz_cd_drives =
					cdio_get_devices(DRIVER_DEVICE);
		if (idx->ppsz_cd_drives == NULL)
			return 0;
231 232 233 234 235 236 237

		for (pos = idx->ppsz_cd_drives ; pos != NULL; pos++) {
			if (*pos == NULL)
		break;
			count++;
		}

238
	} else if (initialize == -1) {
239 240 241
		if (idx->ppsz_cd_drives != NULL)
			if (*(idx->ppsz_cd_drives) != NULL)
				cdio_free_device_list(idx->ppsz_cd_drives);
242 243
		idx->ppsz_cd_drives = NULL;
	}
244 245 246 247 248

#ifdef Libburn_guess_freebsd_atapi_devicE
try_next:;
#endif

249 250 251 252
	if (idx->pos == NULL)
		return 0;
	if (*(idx->pos) == NULL)
		return 0;
253 254 255 256 257 258 259 260

#ifdef Libburn_guess_freebsd_atapi_devicE
	if (strncmp(*(idx->pos), "/dev/acd", 8) == 0) {
		(idx->pos)++;
		goto try_next;
	}
#endif

261 262 263 264 265 266 267 268
	if (strlen(*(idx->pos)) >= adr_size)
		return -1;
	strcpy(adr, *(idx->pos));
	(idx->pos)++;
	return 1;
}


269 270 271 272 273 274 275 276 277 278 279
/* ----------------------------------------------------------------------- */
/* PORTING: Private functions which contain publicly needed functionality. */
/*          Their portable part must be performed. So it is probably best  */
/*          to replace the non-portable part and to call these functions   */
/*          in your port, too.                                             */
/* ----------------------------------------------------------------------- */


/** Wraps a detected drive into libburn structures and hands it over to
    libburn drive list.
*/
280 281 282
static void enumerate_common(char *fname, char *cdio_name,
				int bus_no, int host_no,
				int channel_no, int target_no, int lun_no)
283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301
{
	int ret;
	struct burn_drive out;

	/* General libburn drive setup */
	burn_setup_drive(&out, fname);

	/* This transport adapter uses SCSI-family commands and models
	   (seems the adapter would know better than its boss, if ever) */
	ret = burn_scsi_setup_drive(&out, bus_no, host_no, channel_no,
                                 target_no, lun_no, 0);
        if (ret <= 0)
                return;

	/* PORTING: ------------------- non portable part --------------- */

	/* Transport adapter is libcdio */
	/* Adapter specific handles and data */
	out.p_cdio = NULL;
302 303 304
	strcpy(out.libcdio_name, fname);
	if (strlen(cdio_name) < sizeof(out.libcdio_name))
		strcpy(out.libcdio_name, cdio_name);
305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322

	/* PORTING: ---------------- end of non portable part ------------ */

	/* Adapter specific functions with standardized names */
	out.grab = sg_grab;
	out.release = sg_release;
	out.drive_is_open = sg_drive_is_open;
	out.issue_command = sg_issue_command;
	/* Finally register drive and inquire drive information */
	burn_drive_finish_enum(&out);
}


/* ------------------------------------------------------------------------ */
/* PORTING:           Public functions. These MUST be ported.               */
/* ------------------------------------------------------------------------ */


323 324 325 326 327 328
/** Returns the id string  of the SCSI transport adapter and eventually
    needed operating system facilities.
    This call is usable even if sg_initialize() was not called yet. In that
    case a preliminary constant message might be issued if detailed info is
    not available yet.
    @param msg   returns id string
329 330
    @param flag  unused yet, submit 0
    @return      1 = success, <=0 = failure
331 332
*/
int sg_id_string(char msg[1024], int flag)
333
{
334
	char *version_text;
335

336
	sprintf(msg, "sg-libcdio h%d with libcdio ", LIBCDIO_VERSION_NUM);
337 338 339 340

 #if LIBCDIO_VERSION_NUM < 83 

LIBBURN_MISCONFIGURATION = 0;
341
INTENTIONAL_ABORT_OF_COMPILATION__HEADERFILE_cdio_version_dot_h_TOO_OLD__NEED_libcdio_VERSION_NUM_83 = 0;
342 343
LIBBURN_MISCONFIGURATION_ = 0;

344
 #endif /* LIBCDIO_VERSION_NUM < 83  */
345 346

	version_text = (char *) cdio_version_string;
347 348 349
	strncat(msg, version_text, 800);
	return 1;
}
350 351


352 353 354 355 356 357 358 359 360 361 362 363
/** Performs global initialization of the SCSI transport adapter and eventually
    needed operating system facilities. Checks for compatibility of supporting
    software components.
    @param msg   returns ids and/or error messages of eventual helpers
    @param flag  unused yet, submit 0
    @return      1 = success, <=0 = failure
*/ 
int sg_initialize(char msg[1024], int flag)
{
	int cdio_ver;
	char *msg_pt;

364 365
	cdio_loglevel_default = CDIO_LOG_ASSERT;

366 367 368
	msg[0] = 0;
	sg_id_string(msg, 0);
	cdio_ver = libcdio_version_num;
369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387
	libdax_msgs_submit(libdax_messenger, -1, 0x00000002,
		LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_HIGH,
		msg , 0, 0);
	if (cdio_ver < LIBCDIO_VERSION_NUM) {
		strcat(msg, " ---> ");
		msg_pt = msg + strlen(msg);
		sprintf(msg_pt,
		    "libcdio TOO OLD: numeric version %d , need at least %d",
		    cdio_ver, LIBCDIO_VERSION_NUM);
		libdax_msgs_submit(libdax_messenger, -1,
			0x00000002,
			LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_HIGH,
			msg_pt, 0, 0);
		return 0;
	}
	return 1;
}


388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413
/** Performs global finalization of the SCSI transport adapter and eventually
    needed operating system facilities. Releases globally aquired resources.
    @param flag  unused yet, submit 0
    @return      1 = success, <=0 = failure
*/ 
int sg_shutdown(int flag)
{
	return 1;
}


/** Finalizes BURN_OS_TRANSPORT_DRIVE_ELEMENTS, the components of
    struct burn_drive which are defined in os-*.h.
    The eventual initialization of those components was made underneath
    scsi_enumerate_drives().
    This will be called when a burn_drive gets disposed.
    @param d     the drive to be finalized
    @param flag  unused yet, submit 0
    @return      1 = success, <=0 = failure
*/
int sg_dispose_drive(struct burn_drive *d, int flag)
{
	return 1;
}


414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431
/** Returns the next index number and the next enumerated drive address.
    The enumeration has to cover all available and accessible drives. It is
    allowed to return addresses of drives which are not available but under
    some (even exotic) circumstances could be available. It is on the other
    hand allowed, only to hand out addresses which can really be used right
    in the moment of this call. (This implementation chooses the latter.)
    @param idx An opaque handle. Make no own theories about it.
    @param adr Takes the reply
    @param adr_size Gives maximum size of reply including final 0
    @param initialize  1 = start new,
                       0 = continue, use no other values for now
                      -1 = finish
    @return 1 = reply is a valid address , 0 = no further address available
           -1 = severe error (e.g. adr_size too small)
*/
int sg_give_next_adr(burn_drive_enumerator_t *idx,
		     char adr[], int adr_size, int initialize)
{
432
	int ret, recursion_count = 0, l;
433 434 435 436 437 438 439
	char path[4096];

	ret = sg_give_next_adr_raw(idx, adr, adr_size, initialize);
	if (ret <= 0)
		return ret;
	if (strlen(adr) >= sizeof(path))
		return ret;
440 441 442 443 444 445 446 447 448 449 450 451 452

#ifdef Libburn_is_on_solariS
	/* >>> provisory : preserve Solaris /dev/rdsk/cXtYdZs2 addresses */
	l = strlen(adr);
	if (l >= 18)
		if (strncmp(adr, "/dev/rdsk/c", 11) == 0 && adr[11] >= '0' &&
		    adr[11] <= '9' && strcmp(adr + (l - 2), "s2") == 0)
			return 1;
#endif /* Libburn_is_on_solariS */

	ret = burn_drive_resolve_link(adr, path, &recursion_count, 2);
        if(ret > 0 && strlen(path) < adr_size)
		strcpy(path, adr);
453
	return (ret >= 0);
454 455 456 457 458 459 460 461 462
}


/** Brings all available, not-whitelist-banned, and accessible drives into
    libburn's list of drives.
*/
int scsi_enumerate_drives(void)
{
	burn_drive_enumerator_t idx;
463
	int initialize = 1, ret, i_bus_no = -1, recursion_count = 0, l;
464
        int i_host_no = -1, i_channel_no = -1, i_target_no = -1, i_lun_no = -1;
465
	char buf[4096], target[4096];
466 467

	while(1) {
468
		ret = sg_give_next_adr_raw(&idx, buf, sizeof(buf), initialize);
469 470 471
		initialize = 0;
		if (ret <= 0)
	break;
472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487
		ret = 1;

#ifdef Libburn_is_on_solariS 
		/* >>> provisory : preserve Solaris /dev/rdsk/cXtYdZs2 */
		l = strlen(buf);
		if (l >= 18)
			if (strncmp(buf, "/dev/rdsk/c", 11) == 0 &&
			    buf[11] >= '0' && buf[11] <= '9' &&
			    strcmp(buf + (l - 2), "s2") == 0)
				ret = 0;
#endif /* Libburn_is_on_solariS */

		if (ret == 1) {
			ret = burn_drive_resolve_link(buf, target,
							 &recursion_count,2);
		}
488 489 490
		if (ret <= 0)
			strcpy(target, buf);
		if (burn_drive_is_banned(target))
491
	continue; 
492 493
		sg_obtain_scsi_adr(buf, &i_bus_no, &i_host_no,
				&i_channel_no, &i_target_no, &i_lun_no);
494 495
		enumerate_common(target, buf,
				i_bus_no, i_host_no, i_channel_no,
496
				i_target_no, i_lun_no);
497 498 499 500 501 502
	}
	sg_give_next_adr(&idx, buf, sizeof(buf), -1);
	return 1;
}


503
/** Tells whether libburn has the given drive in use or exclusively reserved.
504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522
    If it is "open" then libburn will eventually call sg_release() on it when
    it is time to give up usage resp. reservation.
*/
/** Published as burn_drive.drive_is_open() */
int sg_drive_is_open(struct burn_drive * d)
{
	return (d->p_cdio != NULL);
}


/** Opens the drive for SCSI commands and - if burn activities are prone
    to external interference on your system - obtains an exclusive access lock
    on the drive. (Note: this is not physical tray locking.)
    A drive that has been opened with sg_grab() will eventually be handed
    over to sg_release() for closing and unreserving. 
*/  
int sg_grab(struct burn_drive *d)
{
	CdIo_t *p_cdio;
523 524
	char *am_eff, msg[4096], *am_wanted;
	int os_errno, second_try = 0;
525

526
	if (d->p_cdio != NULL) {
527 528 529
		d->released = 0;
		return 1;
	}
530 531
	if (d->libcdio_name[0] == 0) /* just to be sure it is initialized */
		strcpy(d->libcdio_name, d->devname);
532
	am_wanted = (burn_sg_open_o_excl & 63) ?  "MMC_RDWR_EXCL" : "MMC_RDWR";
533 534
try_to_open:;
	p_cdio = cdio_open_am(d->libcdio_name, DRIVER_DEVICE, am_wanted);
535
	if (p_cdio == NULL) {
536 537
		os_errno = errno;
		sprintf(msg, "Could not grab drive '%s'", d->devname);
538 539 540
		libdax_msgs_submit(libdax_messenger, d->global_index,
			0x00020003,
			LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
541
			msg, os_errno, 0);
542 543
		return 0;
	}
544 545 546 547
	am_eff = (char *) cdio_get_arg(p_cdio, "access-mode");
        if (strncmp(am_eff, "MMC_RDWR", 8) != 0) {
		cdio_destroy(p_cdio);
		if (!second_try) {
548
			am_wanted = (burn_sg_open_o_excl & 63) ?
549 550 551 552
						"MMC_RDWR" : "MMC_RDWR_EXCL";
			second_try = 1;
			goto try_to_open;
		}
553 554 555 556 557 558 559
		libdax_msgs_submit(libdax_messenger, d->global_index,
			0x00020003,
			LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
			"libcdio provides no MMC_RDWR access mode", 0, 0);
		return 0;
        }

560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593
	d->p_cdio = p_cdio;
	d->released = 0;
	return 1;
}


/** PORTING: Is mainly about the call to sg_close_drive() and whether it
             implements the demanded functionality.
*/
/** Gives up the drive for SCSI commands and releases eventual access locks.
    (Note: this is not physical tray locking.) 
*/
int sg_release(struct burn_drive *d)
{
	if (d->p_cdio == NULL) {
		burn_print(1, "release an ungrabbed drive.  die\n");
		return 0;
	}
	sg_close_drive(d);
	return 0;
}


/** Sends a SCSI command to the drive, receives reply and evaluates wether
    the command succeeded or shall be retried or finally failed.
    Returned SCSI errors shall not lead to a return value indicating failure.
    The callers get notified by c->error. An SCSI failure which leads not to
    a retry shall be notified via scsi_notify_error().
    The Libburn_log_sg_commandS facility might be of help when problems with
    a drive have to be examined. It shall stay disabled for normal use.
    @return: 1 success , <=0 failure
*/
int sg_issue_command(struct burn_drive *d, struct command *c)
{
594
	int sense_valid = 0, i, usleep_time, timeout_ms, no_retry = 0;
595 596
	time_t start_time;
        driver_return_code_t i_status;
597 598 599 600 601
	unsigned int dxfer_len;
        static FILE *fp = NULL;
	mmc_cdb_t cdb = {{0, }};
	cdio_mmc_direction_t e_direction;
	CdIo_t *p_cdio;
602
	unsigned char *sense_pt = NULL;
603 604 605 606 607 608

	c->error = 0;
	if (d->p_cdio == NULL) {
		return 0;
	}
	p_cdio = (CdIo_t *) d->p_cdio;
609 610 611 612 613 614 615 616 617
	if (burn_sg_log_scsi & 1) {
		if (fp == NULL) {
			fp= fopen("/tmp/libburn_sg_command_log", "a");
			fprintf(fp,
			    "\n-----------------------------------------\n");
		}
	}
	if (burn_sg_log_scsi & 3)
		scsi_log_cmd(c,fp,0);
618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635

	memcpy(cdb.field, c->opcode, c->oplen);
	if (c->dir == TO_DRIVE) {
		dxfer_len = c->page->bytes;
		e_direction = SCSI_MMC_DATA_WRITE;
	} else if (c->dir == FROM_DRIVE) {
		if (c->dxfer_len >= 0)
			dxfer_len = c->dxfer_len;
		else
			dxfer_len = BUFFER_SIZE;
		e_direction = SCSI_MMC_DATA_READ;
		/* touch page so we can use valgrind */
		memset(c->page->data, 0, BUFFER_SIZE);
	} else {
		dxfer_len = 0;
		e_direction = SCSI_MMC_DATA_NONE;
	}
		
636 637 638 639
	/* retry-loop */
	start_time = time(NULL);
	timeout_ms = 200000;
	for(i = 0; ; i++) {
640

641
		i_status = mmc_run_cmd(p_cdio, timeout_ms, &cdb, e_direction,
642
				 	dxfer_len, c->page->data);
643 644
		sense_valid = mmc_last_cmd_sense(p_cdio, &sense_pt);
		if (sense_valid >= 18)
645 646 647
			memcpy(c->sense, sense_pt,
				sense_valid >= sizeof(c->sense) ?
				sizeof(c->sense) : sense_valid );
648 649
		if (sense_pt != NULL)
			free(sense_pt);
650

651 652 653
/* Regrettably mmc_run_cmd() does not clearly distinguish between transport
   failure and SCSI error reply.
   This reaction here would be for transport failure:
654

655
		if (i_status != 0 && i_status != DRIVER_OP_ERROR) {
656 657 658 659 660 661 662 663
			libdax_msgs_submit(libdax_messenger,
				d->global_index, 0x0002010c,
				LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
				"Failed to transfer command to drive",
				errno, 0);
			sg_close_drive(d);
			d->released = 1;
			d->busy = BURN_DRIVE_IDLE;
664 665 666
			c->error = 1;
			return -1;
		}
667 668
*/

669 670 671
		if ((!sense_valid) ||
			 ((c->sense[2] & 0x0f) == 0 && c->sense[12] == 0 &&
							 c->sense[13] == 0)) {
672
			memset(c->sense, 0, sizeof(c->sense));
673
			if (i_status != 0) { /* set dummy sense */
674 675
				/*LOGICAL UNIT NOT READY,
					CAUSE NOT REPORTABLE*/
676 677
				c->sense[2] = 0x02;
				c->sense[12] = 0x04;
678
				no_retry = 1;
679 680
			}
		} else
681
			c->sense[2] &= 15;
682
	
683 684
		if (i_status != 0 ||
		    (c->sense[2] || c->sense[12] || c->sense[13])) {
685
			if (no_retry || !c->retry) {
686 687 688
				c->error = 1;
				goto ex;
			}
689
			switch (scsi_error(d, c->sense, 18)) {
690
			case RETRY:
691 692 693 694 695 696 697
				if (burn_sg_log_scsi & 3) {
					/* >>> Need own duration time
					       measurement. Then remove bit1 */
					scsi_log_err(c, fp, c->sense, 0,
							(c->error != 0) | 2);
					scsi_log_cmd(c,fp,0);
				}
698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719
				break;
			case FAIL:
				c->error = 1;
				goto ex;
			}
			/* 
			   Calming down retries and breaking up endless cycle
			*/
			usleep_time = Libburn_sg_libcdio_retry_usleeP +
					i * Libburn_sg_libcdio_retry_incR;
			if (time(NULL) + usleep_time / 1000000 - start_time >
			    timeout_ms / 1000 + 1) {
				c->error = 1;
				goto ex;
			}
			usleep(usleep_time);
		} else
			break; /* retry-loop */
	} /* end of retry-loop */

ex:;
	if (c->error)
720
		scsi_notify_error(d, c, c->sense, 18, 0);
721 722 723

	if (burn_sg_log_scsi & 3) 
		/* >>> Need own duration time measurement. Then remove bit1 */
724
		scsi_log_err(c, fp, c->sense, 0, (c->error != 0) | 2);
725
	return 1;
726 727 728 729 730 731 732 733 734
}


/** Tries to obtain SCSI address parameters.
    @return  1 is success , 0 is failure
*/
int sg_obtain_scsi_adr(char *path, int *bus_no, int *host_no, int *channel_no,
                       int *target_no, int *lun_no)
{
735 736
	CdIo_t *p_cdio;
	char *tuple;
737 738

	*bus_no = *host_no = *channel_no = *target_no = *lun_no = -1;
739 740 741 742 743

	p_cdio = cdio_open(path, DRIVER_DEVICE);
	if (p_cdio == NULL)
		return 0;

744 745 746
	/* Try whether a bus,host,channel,target,lun address tuple is
	   available */
	tuple = (char *) cdio_get_arg(p_cdio, "scsi-tuple");
747 748 749 750 751 752 753
        if (tuple != NULL) if (tuple[0]) {
		sscanf(tuple, "%d,%d,%d,%d,%d",
			bus_no, host_no, channel_no, target_no, lun_no);
	}

	cdio_destroy(p_cdio);
	return (*bus_no >= 0);
754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780
}


/** Tells wether a text is a persistent address as listed by the enumeration
    functions.
*/
int sg_is_enumerable_adr(char* adr)
{
	burn_drive_enumerator_t idx;
	int initialize = 1, ret;
	char buf[64];

	while(1) {
		ret = sg_give_next_adr(&idx, buf, sizeof(buf), initialize);
		initialize = 0;
		if (ret <= 0)
	break;
		if (strcmp(adr, buf) == 0) {
			sg_give_next_adr(&idx, buf, sizeof(buf), -1);
			return 1;
		}
	}
	sg_give_next_adr(&idx, buf, sizeof(buf), -1);
	return (0);
}


781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853
#ifdef __FreeBSD__
#define Libburn_guess_block_devicE 1
#endif
#ifdef __FreeBSD_kernel__
#define Libburn_guess_block_devicE 1
#endif

#ifdef Libburn_guess_block_devicE

/* ts B00115 */
/* The FreeBSD implementation of burn_os_is_2k_seekrw().
   On FreeBSD there are no block devices.
*/
static int freebsd_is_2k_seekrw(char *path, int flag)
{
        struct stat stbuf;
	char *spt;
	int i, e;

        if (stat(path, &stbuf) == -1)
                return 0;
        if (S_ISREG(stbuf.st_mode))
                return 1;
	if (!S_ISCHR(stbuf.st_mode))
		return 0;
	spt = strrchr(path, '/');
	if (spt == NULL)
	        spt = path;
	else
	        spt++;
	e = strlen(spt);
	for (i = strlen(spt) - 1; i > 0; i--)
		if (spt[i] >= '0' && spt[i] <= '9')
			e = i;
	if (strncmp(spt, "da", e) == 0) /* SCSI disk. E.g. USB stick. */
		return 1;
	if (strncmp(spt, "cd", e) == 0) /* SCSI CD drive might be writeable. */
		return 1;
	if (strncmp(spt, "ad", e) == 0) /* IDE hard drive */
		return 1;
	if (strncmp(spt, "acd", e) == 0) /* IDE CD drive might be writeable */
		return 1;
	if (strncmp(spt, "fd", e) == 0) /* Floppy disk */
		return 1;
	if (strncmp(spt, "fla", e) == 0) /* Flash drive */
		return 1;
	return 0;
}

#endif /* Libburn_guess_block_devicE */


/* Return 1 if the given path leads to a regular file or a device that can be
   seeked, read, and possibly written with 2 kB granularity. 
*/
int burn_os_is_2k_seekrw(char *path, int flag)
{
#ifdef Libburn_guess_block_devicE
	return freebsd_is_2k_seekrw(path, flag);
#else 
	struct stat stbuf;

	if (stat(path, &stbuf) == -1)
		return 0;
	if (S_ISREG(stbuf.st_mode))
		return 1;
	if (S_ISBLK(stbuf.st_mode))
		return 1;
	return 0;
#endif /* ! Libburn_guess_block_devicE */
}


854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889
/** Estimate the potential payload capacity of a file address.
    @param path  The address of the file to be examined. If it does not
                 exist yet, then the directory will be inquired.
    @param bytes The pointed value gets modified, but only if an estimation is
                 possible.
    @return      -2 = cannot perform necessary operations on file object
                 -1 = neither path nor dirname of path exist
                  0 = could not estimate size capacity of file object
                  1 = estimation has been made, bytes was set
*/
int burn_os_stdio_capacity(char *path, off_t *bytes)
{
	struct stat stbuf;

#ifdef Libburn_os_has_statvfS
	struct statvfs vfsbuf;
#endif

	char testpath[4096], *cpt;
	long blocks;
	off_t add_size = 0;

	testpath[0] = 0;
	blocks = *bytes / 512;
	if (stat(path, &stbuf) == -1) {
		strcpy(testpath, path);
		cpt = strrchr(testpath, '/');
		if(cpt == NULL)
			strcpy(testpath, ".");
		else if(cpt == testpath)
			testpath[1] = 0;
		else
			*cpt = 0;
		if (stat(testpath, &stbuf) == -1)
			return -1;

890
#ifdef __linux
891

892
	/* GNU/Linux specific determination of block device size */
893
	} else if(S_ISBLK(stbuf.st_mode)) {
894 895
		int open_mode = O_RDONLY, fd, ret;

896 897 898 899 900 901 902 903 904
		fd = open(path, open_mode);
		if (fd == -1)
			return -2;
		ret = ioctl(fd, BLKGETSIZE, &blocks);
		close(fd);
		if (ret == -1)
			return -2;
		*bytes = ((off_t) blocks) * (off_t) 512;

905
#endif /* __linux */
906

907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922
#ifdef Libburn_is_on_freebsD

	} else if(S_ISCHR(stbuf.st_mode)) {
		int fd, ret;

		fd = open(path, O_RDONLY);
		if (fd == -1)
			return -2;
		ret = ioctl(fd, DIOCGMEDIASIZE, &add_size);
		close(fd);
		if (ret == -1)
			return -2;
		*bytes = add_size;

#endif/* Libburn_is_on_freebsD */

923 924 925 926 927 928 929 930 931 932 933 934
	} else if(S_ISREG(stbuf.st_mode)) {
		add_size = stbuf.st_blocks * (off_t) 512;
		strcpy(testpath, path);
	} else
		return 0;

	if (testpath[0]) {	

#ifdef Libburn_os_has_statvfS

		if (statvfs(testpath, &vfsbuf) == -1)
			return -2;
935
		*bytes = add_size + ((off_t) vfsbuf.f_frsize) *
936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983
						(off_t) vfsbuf.f_bavail;

#else /* Libburn_os_has_statvfS */

		return 0;

#endif /* ! Libburn_os_has_stavtfS */

	}
	return 1;
}


/* ts A91122 : an interface to open(O_DIRECT) or similar OS tricks. */

#ifdef Libburn_read_o_direcT

	/* No special O_DIRECT-like precautions are implemented here */

#endif /* Libburn_read_o_direcT */


int burn_os_open_track_src(char *path, int open_flags, int flag)
{
	int fd;

	fd = open(path, open_flags);
	return fd;
}


void *burn_os_alloc_buffer(size_t amount, int flag)
{
	void *buf = NULL;

	buf = calloc(1, amount);
	return buf;
}


int burn_os_free_buffer(void *buffer, size_t amount, int flag)
{
	if (buffer == NULL)
		return 0;
	free(buffer);
	return 1;
}