libburn/libburn/mmc.c

1470 lines
41 KiB
C
Raw Normal View History

2006-08-15 20:37:04 +00:00
/* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */
/* ts A61009 */
/* #include <a ssert.h> */
2006-08-15 20:37:04 +00:00
#include <stdio.h>
#include <string.h>
#include <unistd.h>
#include <stdlib.h>
#include <pthread.h>
#include "error.h"
#include "sector.h"
#include "libburn.h"
#include "transport.h"
#include "mmc.h"
#include "spc.h"
#include "drive.h"
#include "debug.h"
#include "toc.h"
#include "structure.h"
#include "options.h"
#ifdef Libburn_log_in_and_out_streaM
/* <<< ts A61031 */
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#endif /* Libburn_log_in_and_out_streaM */
/* ts A61005 */
#include "libdax_msgs.h"
extern struct libdax_msgs *libdax_messenger;
/* ts A61219 : Based on knowlege from dvd+rw-tools-7.0 and mmc5r03c.pdf */
#define Libburn_support_dvd_plus_rW 1
/* ts A61229 */
/*
*/
#define Libburn_support_dvd_minusrw_overW 1
/* Progress report (with Libburn_support_dvd_plus_rW defined):
ts A61219 : It seems to work with a used (i.e. thoroughly formatted) DVD+RW.
Error messages of class DEBUG appear because of inability to
read TOC or track info. Nevertheless, the written images verify.
ts A61220 : Burned to a virgin DVD+RW by help of new mmc_format_unit()
(did not test wether it would work without). Burned to a
not completely formatted DVD+RW. (Had worked before without
mmc_format_unit() but i did not exceed the formatted range
as reported by dvd+rw-mediainfo.)
ts A61221 : Speed setting now works for both of my drives. The according
functions in dvd+rw-tools are a bit intimidating to the reader.
I hope it is possible to leave much of this to the drive.
And if it fails ... well, it's only speed setting. :))
2007-01-01 17:10:54 +00:00
ts A61229 : Burned to several DVD-RW formatted to mode Restricted Overwrite
by dvd+rw-format. Needs Libburn_support_dvd_minusrw_overW.
ts A61230 : Other than growisofs, libburn does not send a mode page 5 for
such DVD-RW (which the MMC-5 standard does deprecate) and it
really seems to work without such a page.
ts A70101 : Formatted DVD-RW media. Success is varying with media, but
dvd+rw-format does not do better with the same media.
Todo:
Determine first free lba for appending data.
Determine start lba of most recent mkisofs session.
*/
2006-08-15 20:37:04 +00:00
static unsigned char MMC_GET_TOC[] = { 0x43, 2, 2, 0, 0, 0, 0, 16, 0, 0 };
static unsigned char MMC_GET_ATIP[] = { 0x43, 2, 4, 0, 0, 0, 0, 16, 0, 0 };
static unsigned char MMC_GET_DISC_INFO[] =
{ 0x51, 0, 0, 0, 0, 0, 0, 16, 0, 0 };
static unsigned char MMC_READ_CD[] = { 0xBE, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
static unsigned char MMC_ERASE[] = { 0xA1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
static unsigned char MMC_SEND_OPC[] = { 0x54, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
static unsigned char MMC_SET_SPEED[] =
{ 0xBB, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
static unsigned char MMC_WRITE_12[] =
{ 0xAA, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
static unsigned char MMC_WRITE_10[] = { 0x2A, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
/* ts A61201 : inserted 0, before 16, */
2006-08-15 20:37:04 +00:00
static unsigned char MMC_GET_CONFIGURATION[] =
{ 0x46, 0, 0, 0, 0, 0, 0, 16, 0, 0 };
2006-08-15 20:37:04 +00:00
static unsigned char MMC_SYNC_CACHE[] = { 0x35, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
static unsigned char MMC_GET_EVENT[] = { 0x4A, 1, 0, 0, 16, 0, 0, 0, 8, 0 };
static unsigned char MMC_CLOSE[] = { 0x5B, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
static unsigned char MMC_TRACK_INFO[] = { 0x52, 0, 0, 0, 0, 0, 0, 16, 0, 0 };
static unsigned char MMC_SEND_CUE_SHEET[] =
{ 0x5D, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
/* ts A61023 : get size and free space of drive buffer */
static unsigned char MMC_READ_BUFFER_CAPACITY[] =
{ 0x5C, 0, 0, 0, 0, 0, 0, 16, 0, 0 };
/* ts A61219 : format DVD+RW (and various others) */
static unsigned char MMC_FORMAT_UNIT[] = { 0x04, 0x11, 0, 0, 0, 0 };
/* ts A61221 :
To set speed for DVD media (0xBB is for CD but works on my LG GSA drive) */
static unsigned char MMC_SET_STREAMING[] =
{ 0xB6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
/* ts A61225 :
To obtain write speed descriptors (command can do other things too) */
static unsigned char MMC_GET_PERFORMANCE[] =
{ 0xAC, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
static int mmc_function_spy_do_tell = 0;
int mmc_function_spy(char * text)
{
if (mmc_function_spy_do_tell)
fprintf(stderr,"libburn: experimental: mmc_function_spy: %s\n",
text);
return 1;
}
int mmc_function_spy_ctrl(int do_tell)
{
mmc_function_spy_do_tell= !!do_tell;
return 1;
}
2006-08-15 20:37:04 +00:00
void mmc_send_cue_sheet(struct burn_drive *d, struct cue_sheet *s)
{
struct buffer buf;
struct command c;
mmc_function_spy("mmc_send_cue_sheet");
2006-08-15 20:37:04 +00:00
c.retry = 1;
c.oplen = sizeof(MMC_SEND_CUE_SHEET);
memcpy(c.opcode, MMC_SEND_CUE_SHEET, sizeof(MMC_SEND_CUE_SHEET));
c.page = &buf;
c.page->bytes = s->count * 8;
c.page->sectors = 0;
c.opcode[6] = (c.page->bytes >> 16) & 0xFF;
c.opcode[7] = (c.page->bytes >> 8) & 0xFF;
c.opcode[8] = c.page->bytes & 0xFF;
c.dir = TO_DRIVE;
memcpy(c.page->data, s->data, c.page->bytes);
d->issue_command(d, &c);
}
/* ts A61110 : added parameters trackno, lba, nwa. Redefined return value.
@return 1=nwa is valid , 0=nwa is not valid , -1=error */
int mmc_get_nwa(struct burn_drive *d, int trackno, int *lba, int *nwa)
2006-08-15 20:37:04 +00:00
{
struct buffer buf;
struct command c;
unsigned char *data;
mmc_function_spy("mmc_get_nwa");
2006-08-15 20:37:04 +00:00
c.retry = 1;
c.oplen = sizeof(MMC_TRACK_INFO);
memcpy(c.opcode, MMC_TRACK_INFO, sizeof(MMC_TRACK_INFO));
c.opcode[1] = 1;
if(trackno<=0) {
if (d->current_profile == 0x1a || d->current_profile == 0x13)
/* DVD+RW or DVD-RW restricted overwrite*/
c.opcode[5] = 1;
else /* mmc5r03c.pdf: valid only for CD, DVD+R, DVD+R DL */
c.opcode[5] = 0xFF;
} else
c.opcode[5] = trackno;
2006-08-15 20:37:04 +00:00
c.page = &buf;
c.dir = FROM_DRIVE;
d->issue_command(d, &c);
data = c.page->data;
*lba = (data[8] << 24) + (data[9] << 16)
+ (data[10] << 8) + data[11];
*nwa = (data[12] << 24) + (data[13] << 16)
+ (data[14] << 8) + data[15];
2007-01-01 17:10:54 +00:00
if (d->current_profile == 0x1a || d->current_profile == 0x13) {
/* DVD+RW or DVD-RW restricted overwrite */
*lba = *nwa = 0;
} else if (!(data[7]&1)) {
/* ts A61106 : MMC-1 Table 142 : NWA_V = NWA Valid Flag */
libdax_msgs_submit(libdax_messenger, -1, 0x00000002,
LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_ZERO,
"mmc_get_nwa: Track Info Block: NWA_V == 0", 0, 0);
return 0;
}
return 1;
2006-08-15 20:37:04 +00:00
}
/* ts A61009 : function is obviously unused. */
/* void mmc_close_disc(struct burn_drive *d, struct burn_write_opts *o) */
void mmc_close_disc(struct burn_write_opts *o)
2006-08-15 20:37:04 +00:00
{
struct burn_drive *d;
mmc_function_spy("mmc_close_disc");
libdax_msgs_submit(libdax_messenger, -1, 0x00000002,
LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_ZERO,
"HOW THAT ? mmc_close_disc() was called", 0, 0);
/* ts A61009 : made impossible by removing redundant parameter d */
/* a ssert(o->drive == d); */
d = o->drive;
2006-08-15 20:37:04 +00:00
o->multi = 0;
spc_select_write_params(d, o);
mmc_close(d, 1, 0);
}
/* ts A61009 : function is obviously unused. */
/* void mmc_close_session(struct burn_drive *d, struct burn_write_opts *o) */
void mmc_close_session(struct burn_write_opts *o)
2006-08-15 20:37:04 +00:00
{
struct burn_drive *d;
mmc_function_spy("mmc_close_session");
libdax_msgs_submit(libdax_messenger, -1, 0x00000002,
LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_ZERO,
"HOW THAT ? mmc_close_session() was called", 0, 0);
/* ts A61009 : made impossible by removing redundant parameter d */
/* a ssert(o->drive == d); */
d = o->drive;
2006-08-15 20:37:04 +00:00
o->multi = 3;
spc_select_write_params(d, o);
mmc_close(d, 1, 0);
}
void mmc_close(struct burn_drive *d, int session, int track)
{
struct command c;
mmc_function_spy("mmc_close");
2006-08-15 20:37:04 +00:00
c.retry = 1;
c.oplen = sizeof(MMC_CLOSE);
memcpy(c.opcode, MMC_CLOSE, sizeof(MMC_CLOSE));
/* ts A61030 : shifted !!session rather than or-ing plain session */
c.opcode[2] = ((!!session)<<1) | !!track;
2006-08-15 20:37:04 +00:00
c.opcode[4] = track >> 8;
c.opcode[5] = track & 0xFF;
c.page = NULL;
c.dir = NO_TRANSFER;
d->issue_command(d, &c);
}
void mmc_get_event(struct burn_drive *d)
{
struct buffer buf;
struct command c;
mmc_function_spy("mmc_get_event");
2006-08-15 20:37:04 +00:00
c.retry = 1;
c.oplen = sizeof(MMC_GET_EVENT);
memcpy(c.opcode, MMC_GET_EVENT, sizeof(MMC_GET_EVENT));
c.page = &buf;
c.page->bytes = 0;
c.page->sectors = 0;
c.dir = FROM_DRIVE;
d->issue_command(d, &c);
burn_print(12, "0x%x:0x%x:0x%x:0x%x\n",
c.page->data[0], c.page->data[1], c.page->data[2],
c.page->data[3]);
burn_print(12, "event: %d:%d:%d:%d\n", c.page->data[4],
c.page->data[5], c.page->data[6], c.page->data[7]);
}
2006-08-15 20:37:04 +00:00
void mmc_write_12(struct burn_drive *d, int start, struct buffer *buf)
{
struct command c;
int len;
mmc_function_spy("mmc_write_12");
2006-08-15 20:37:04 +00:00
len = buf->sectors;
/* ts A61009 */
/* a ssert(buf->bytes >= buf->sectors);*/ /* can be == at 0... */
2006-08-15 20:37:04 +00:00
burn_print(100, "trying to write %d at %d\n", len, start);
memcpy(c.opcode, MMC_WRITE_12, sizeof(MMC_WRITE_12));
c.retry = 1;
c.oplen = sizeof(MMC_WRITE_12);
c.opcode[2] = start >> 24;
c.opcode[3] = (start >> 16) & 0xFF;
c.opcode[4] = (start >> 8) & 0xFF;
c.opcode[5] = start & 0xFF;
c.opcode[6] = len >> 24;
c.opcode[7] = (len >> 16) & 0xFF;
c.opcode[8] = (len >> 8) & 0xFF;
c.opcode[9] = len & 0xFF;
c.page = buf;
c.dir = TO_DRIVE;
d->issue_command(d, &c);
}
int mmc_write(struct burn_drive *d, int start, struct buffer *buf)
{
int cancelled;
struct command c;
int len;
#ifdef Libburn_log_in_and_out_streaM
/* <<< ts A61031 */
static int tee_fd= -1;
if(tee_fd==-1)
tee_fd= open("/tmp/libburn_sg_written",
O_WRONLY|O_CREAT|O_TRUNC,S_IRUSR|S_IWUSR);
#endif /* Libburn_log_in_and_out_streaM */
mmc_function_spy("mmc_write");
2006-08-15 20:37:04 +00:00
pthread_mutex_lock(&d->access_lock);
cancelled = d->cancel;
pthread_mutex_unlock(&d->access_lock);
if (cancelled)
return BE_CANCELLED;
len = buf->sectors;
/* ts A61009 : buffer fill problems are to be handled by caller */
/* a ssert(buf->bytes >= buf->sectors);*/ /* can be == at 0... */
2006-08-15 20:37:04 +00:00
burn_print(100, "trying to write %d at %d\n", len, start);
memcpy(c.opcode, MMC_WRITE_10, sizeof(MMC_WRITE_10));
c.retry = 1;
c.oplen = sizeof(MMC_WRITE_10);
c.opcode[2] = start >> 24;
c.opcode[3] = (start >> 16) & 0xFF;
c.opcode[4] = (start >> 8) & 0xFF;
c.opcode[5] = start & 0xFF;
c.opcode[6] = 0;
c.opcode[7] = (len >> 8) & 0xFF;
c.opcode[8] = len & 0xFF;
c.page = buf;
c.dir = TO_DRIVE;
/*
burn_print(12, "%d, %d, %d, %d - ", c->opcode[2], c->opcode[3], c->opcode[4], c->opcode[5]);
burn_print(12, "%d, %d, %d, %d\n", c->opcode[6], c->opcode[7], c->opcode[8], c->opcode[9]);
*/
#ifdef Libburn_log_in_and_out_streaM
/* <<< ts A61031 */
if(tee_fd!=-1) {
write(tee_fd,c.page->data,len*2048);
}
#endif /* Libburn_log_in_and_out_streaM */
2006-08-15 20:37:04 +00:00
d->issue_command(d, &c);
/* ts A61112 : react on eventual error condition */
if (c.error && c.sense[2]!=0) {
/* >>> make this scsi_notify_error() when liberated */
if (c.sense[2]!=0) {
char msg[160];
sprintf(msg,
"SCSI error on write(%d,%d): key=%X asc=%2.2Xh ascq=%2.2Xh",
start, len,
c.sense[2],c.sense[12],c.sense[13]);
libdax_msgs_submit(libdax_messenger, d->global_index,
0x0002011d,
LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
msg, 0, 0);
}
pthread_mutex_lock(&d->access_lock);
d->cancel = 1;
pthread_mutex_unlock(&d->access_lock);
return BE_CANCELLED;
}
2006-08-15 20:37:04 +00:00
return 0;
}
void mmc_read_toc(struct burn_drive *d)
{
/* read full toc, all sessions, in m/s/f form, 4k buffer */
struct burn_track *track;
struct burn_session *session;
struct buffer buf;
struct command c;
int dlen;
2006-10-22 13:03:28 +00:00
int i, bpl= 12;
2006-08-15 20:37:04 +00:00
unsigned char *tdata;
mmc_function_spy("mmc_read_toc");
2006-08-15 20:37:04 +00:00
memcpy(c.opcode, MMC_GET_TOC, sizeof(MMC_GET_TOC));
c.retry = 1;
c.oplen = sizeof(MMC_GET_TOC);
c.page = &buf;
c.page->bytes = 0;
c.page->sectors = 0;
c.dir = FROM_DRIVE;
d->issue_command(d, &c);
if (c.error) {
/* ts A61020 : this snaps on non-blank DVD media */
/* ts A61106 : also snaps on CD with unclosed track/session */
/* Very unsure wether this old measure is ok.
Obviously higher levels do not care about this.
outdated info: DVD+RW burns go on after passing through here.
2006-08-15 20:37:04 +00:00
d->busy = BURN_DRIVE_IDLE;
*/
libdax_msgs_submit(libdax_messenger, d->global_index,
0x0002010d,
LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_HIGH,
"Could not inquire TOC (non-blank DVD media ?)", 0,0);
d->status = BURN_DISC_UNSUITABLE;
d->toc_entries = 0;
/* Prefering memory leaks over fandangos */
d->toc_entry = malloc(sizeof(struct burn_toc_entry));
2006-08-15 20:37:04 +00:00
return;
}
dlen = c.page->data[0] * 256 + c.page->data[1];
d->toc_entries = (dlen - 2) / 11;
/*
some drives fail this check.
ts A61007 : if re-enabled then not via Assert.
a ssert(((dlen - 2) % 11) == 0);
2006-08-15 20:37:04 +00:00
*/
d->toc_entry = malloc(d->toc_entries * sizeof(struct burn_toc_entry));
tdata = c.page->data + 4;
burn_print(12, "TOC:\n");
d->disc = burn_disc_create();
for (i = 0; i < c.page->data[3]; i++) {
session = burn_session_create();
burn_disc_add_session(d->disc, session, BURN_POS_END);
burn_session_free(session);
}
2006-10-22 13:03:28 +00:00
/* ts A61022 */
burn_print(bpl, "-----------------------------------\n");
2006-08-15 20:37:04 +00:00
for (i = 0; i < d->toc_entries; i++, tdata += 11) {
2006-10-22 13:03:28 +00:00
/* ts A61022: was burn_print level 12 */
burn_print(bpl, "S %d, PT %2.2Xh, TNO %d :", tdata[0],tdata[3],
2006-08-15 20:37:04 +00:00
tdata[2]);
2006-10-22 13:03:28 +00:00
burn_print(bpl, " MSF(%d:%d:%d)", tdata[4],tdata[5],tdata[6]);
burn_print(bpl, " PMSF(%d:%d:%d %d)",
tdata[8], tdata[9], tdata[10],
burn_msf_to_lba(tdata[8], tdata[9], tdata[10])
);
burn_print(bpl, " - control %d, adr %d\n", tdata[1] & 0xF,
2006-08-15 20:37:04 +00:00
tdata[1] >> 4);
/*
fprintf(stderr, "libburn_experimental: toc entry #%d : %d %d %d\n",i,tdata[8], tdata[9], tdata[10]);
*/
2006-08-15 20:37:04 +00:00
if (tdata[3] == 1) {
if (burn_msf_to_lba(tdata[8], tdata[9], tdata[10])) {
d->disc->session[0]->hidefirst = 1;
track = burn_track_create();
burn_session_add_track(d->disc->
session[tdata[0] - 1],
track, BURN_POS_END);
burn_track_free(track);
}
}
if (tdata[0] <= 0 || tdata[0] > d->disc->sessions)
tdata[0] = d->disc->sessions;
if (tdata[3] < 100 && tdata[0] > 0) {
2006-08-15 20:37:04 +00:00
track = burn_track_create();
burn_session_add_track(d->disc->session[tdata[0] - 1],
track, BURN_POS_END);
track->entry = &d->toc_entry[i];
burn_track_free(track);
}
d->toc_entry[i].session = tdata[0];
d->toc_entry[i].adr = tdata[1] >> 4;
d->toc_entry[i].control = tdata[1] & 0xF;
d->toc_entry[i].tno = tdata[2];
d->toc_entry[i].point = tdata[3];
d->toc_entry[i].min = tdata[4];
d->toc_entry[i].sec = tdata[5];
d->toc_entry[i].frame = tdata[6];
d->toc_entry[i].zero = tdata[7];
d->toc_entry[i].pmin = tdata[8];
d->toc_entry[i].psec = tdata[9];
d->toc_entry[i].pframe = tdata[10];
if (tdata[3] == 0xA0)
d->disc->session[tdata[0] - 1]->firsttrack = tdata[8];
if (tdata[3] == 0xA1)
d->disc->session[tdata[0] - 1]->lasttrack = tdata[8];
if (tdata[3] == 0xA2)
d->disc->session[tdata[0] - 1]->leadout_entry =
&d->toc_entry[i];
}
2006-10-22 13:03:28 +00:00
/* ts A61022 */
burn_print(bpl, "-----------------------------------\n");
2006-08-15 20:37:04 +00:00
if (d->status != BURN_DISC_APPENDABLE)
d->status = BURN_DISC_FULL;
toc_find_modes(d);
}
void mmc_read_disc_info(struct burn_drive *d)
{
struct buffer buf;
unsigned char *data;
struct command c;
char msg[160];
/* ts A61020 */
d->start_lba = d->end_lba = -2000000000;
d->erasable = 0;
/* ts A61202 */
d->toc_entries = 0;
if (d->status == BURN_DISC_EMPTY)
return;
mmc_get_configuration(d);
if ((d->current_profile != 0 || d->status != BURN_DISC_UNREADY)
&& ! d->current_is_supported_profile) {
if (!d->silent_on_scsi_error) {
sprintf(msg,
"Unsuitable media detected. Profile %4.4Xh %s",
d->current_profile, d->current_profile_text);
libdax_msgs_submit(libdax_messenger, d->global_index,
0x0002011e,
LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
msg, 0,0);
}
d->status = BURN_DISC_UNSUITABLE;
return;
}
2006-08-15 20:37:04 +00:00
mmc_function_spy("mmc_read_disc_info");
2006-08-15 20:37:04 +00:00
memcpy(c.opcode, MMC_GET_DISC_INFO, sizeof(MMC_GET_DISC_INFO));
c.retry = 1;
c.oplen = sizeof(MMC_GET_DISC_INFO);
c.page = &buf;
c.page->sectors = 0;
c.page->bytes = 0;
c.dir = FROM_DRIVE;
d->issue_command(d, &c);
if (c.error) {
d->busy = BURN_DRIVE_IDLE;
return;
}
data = c.page->data;
d->erasable = !!(data[2] & 16);
/*
fprintf(stderr, "libburn_experimental: data[2]= %d 0x%x\n",
(unsigned) data[2], (unsigned) data[2]);
*/
2006-08-15 20:37:04 +00:00
switch (data[2] & 3) {
case 0:
d->toc_entries = 0;
d->start_lba = burn_msf_to_lba(data[17], data[18], data[19]);
d->end_lba = burn_msf_to_lba(data[21], data[22], data[23]);
/*
fprintf(stderr, "libburn_experimental: start_lba = %d (%d %d %d) , end_lba = %d (%d %d %d)\n",
d->start_lba, data[17], data[18], data[19],
d->end_lba, data[21], data[22], data[23]);
*/
2006-08-15 20:37:04 +00:00
d->status = BURN_DISC_BLANK;
break;
case 1:
d->status = BURN_DISC_APPENDABLE;
case 2:
if (d->current_profile == -1 || d->current_is_cd_profile)
mmc_read_toc(d);
2006-08-15 20:37:04 +00:00
break;
}
/* >>> ts A61217 : Note for future
growisofs performs OPC if (data[0]<<8)|data[1]<=32
which indicates no OPC entries are attached to the
reply from the drive.
*/
/* ts A61219 : mmc5r03c.pdf 6.22.3.1.13 BG Format Status
0=blank (not yet started)
1=started but neither running nor complete
2=in progress
3=completed
*/
d->bg_format_status = data[7] & 3;
/* ts A61219 : preliminarily declare all DVD+RW blank,
(which is not the same as bg_format_status==0 "blank") */
/* ts A61229 : same for DVD-RW Restricted overwrite */
if (d->current_profile == 0x1a || d->current_profile == 0x13)
d->status = BURN_DISC_BLANK;
2006-08-15 20:37:04 +00:00
}
void mmc_read_atip(struct burn_drive *d)
{
struct buffer buf;
struct command c;
/* ts A61021 */
2006-10-21 10:34:15 +00:00
unsigned char *data;
/* Speed values from A1:
With 4 cdrecord tells "10" or "8" where MMC-1 says "8".
cdrecord "8" appear on 4xCD-RW and thus seem to be quite invalid.
2006-10-21 10:34:15 +00:00
My CD-R (>=24 speed) tell no A1.
The higher non-MMC-1 values are hearsay.
*/
/* 0, 2, 4, 6, 10, -, 16, -, */
static int speed_value[16]= { 0, 353, 706, 1059, 1764, -5, 2824, -7,
4234, 5646, 7056, 8468, -12, -13, -14, -15};
/* 24, 32, 40, 48, -, -, -, - */
2006-10-21 10:34:15 +00:00
mmc_function_spy("mmc_read_atip");
2006-08-15 20:37:04 +00:00
memcpy(c.opcode, MMC_GET_ATIP, sizeof(MMC_GET_ATIP));
c.retry = 1;
c.oplen = sizeof(MMC_GET_ATIP);
c.page = &buf;
c.page->bytes = 0;
c.page->sectors = 0;
c.dir = FROM_DRIVE;
d->issue_command(d, &c);
burn_print(1, "atip shit for you\n");
2006-10-21 10:34:15 +00:00
/* ts A61021 */
data = c.page->data;
d->erasable= !!(data[6]&64);
d->start_lba= burn_msf_to_lba(data[8],data[9],data[10]);
d->end_lba= burn_msf_to_lba(data[12],data[13],data[14]);
if (data[6]&4) {
if (speed_value[(data[16]>>4)&7] > 0) {
2006-10-21 10:34:15 +00:00
d->mdata->min_write_speed =
speed_value[(data[16]>>4)&7];
if (speed_value[(data[16])&15] <= 0)
d->mdata->max_write_speed =
speed_value[(data[16]>>4)&7];
}
if (speed_value[(data[16])&15] > 0) {
2006-10-21 10:34:15 +00:00
d->mdata->max_write_speed =
speed_value[(data[16])&15];
if (speed_value[(data[16]>>4)&7] <= 0)
d->mdata->min_write_speed =
speed_value[(data[16])&15];
}
2006-10-21 10:34:15 +00:00
}
#ifdef Burn_mmc_be_verbous_about_atiP
{ int i;
fprintf(stderr,"libburn_experimental: Returned ATIP Data\n");
for(i= 0; i<28; i++)
fprintf(stderr,"%3.3d (0x%2.2x)%s",
data[i],data[i],((i+1)%5 ? " ":"\n"));
fprintf(stderr,"\n");
fprintf(stderr,
"libburn_experimental: Indicative Target Writing Power= %d\n",
(data[4]>>4)&7);
fprintf(stderr,
"libburn_experimental: Reference speed= %d ->%d\n",
data[4]&7, speed_value[data[4]&7]);
fprintf(stderr,
"libburn_experimental: Is %sunrestricted\n",
(data[5]&64?"":"not "));
fprintf(stderr,
"libburn_experimental: Is %serasable, sub-type %d\n",
(data[6]&64?"":"not "),(data[6]>>3)&3);
fprintf(stderr,
"libburn_experimental: lead in: %d (%-2.2d:%-2.2d/%-2.2d)\n",
burn_msf_to_lba(data[8],data[9],data[10]),
data[8],data[9],data[10]);
fprintf(stderr,
"libburn_experimental: lead out: %d (%-2.2d:%-2.2d/%-2.2d)\n",
burn_msf_to_lba(data[12],data[13],data[14]),
data[12],data[13],data[14]);
if(data[6]&4)
fprintf(stderr,
"libburn_experimental: A1 speed low %d speed high %d\n",
speed_value[(data[16]>>4)&7], speed_value[(data[16])&7]);
if(data[6]&2)
fprintf(stderr,
"libburn_experimental: A2 speed low %d speed high %d\n",
speed_value[(data[20]>>4)&7], speed_value[(data[20])&7]);
if(data[6]&1)
fprintf(stderr,
"libburn_experimental: A3 speed low %d speed high %d\n",
speed_value[(data[24]>>4)&7], speed_value[(data[24])&7]);
}
#endif /* Burn_mmc_be_verbous_about_atiP */
/* ts A61020
http://www.t10.org/ftp/t10/drafts/mmc/mmc-r10a.pdf , table 77 :
0 ATIP Data Length MSB
1 ATIP Data Length LSB
2 Reserved
3 Reserved
4 bit7=1, bit4-6="Indicative Target Writing Power", bit3=reserved ,
bit0-2="Reference speed"
5 bit7=0, bit6="URU" , bit0-5=reserved
6 bit7=1, bit6="Disc Type", bit3-4="Disc Sub-Type",
bit2="A1", bit1="A2", bit0="A3"
7 reserved
8 ATIP Start Time of lead-in (Min)
9 ATIP Start Time of lead-in (Sec)
10 ATIP Start Time of lead-in (Frame)
11 reserved
12 ATIP Last Possible Start Time of lead-out (Min)
13 ATIP Last Possible Start Time of lead-out (Sec)
14 ATIP Last Possible Start Time of lead-out (Frame)
15 reserved
16 bit7=0, bit4-6="Lowest Usable CLV Recording speed"
bit0-3="Highest Usable CLV Recording speed"
17 bit7=0, bit4-6="Power Multiplication Factor p",
bit1-3="Target y value of the Modulation/Power function", bit0=reserved
18 bit7=1, bit4-6="Recommended Erase/Write Power Ratio (P(inf)/W(inf))"
bit0-3=reserved
19 reserved
20-22 A2 Values
23 reserved
24-26 A3 Values
27 reserved
Disc Type - zero indicates CD-R media; one indicates CD-RW media.
Disc Sub-Type - shall be set to zero.
A1 - when set to one, indicates that bytes 16-18 are valid.
Lowest Usable CLV Recording Speed
000b Reserved
001b 2X
010b - 111b Reserved
Highest CLV Recording Speeds
000b Reserved
001b 2X
010b 4X
011b 6X
100b 8X
101b - 111b Reserved
MMC-3 seems to recommend MODE SENSE (5Ah) page 2Ah rather than A1, A2, A3.
This page is loaded in libburn function spc_sense_caps() .
Speed is given in kbytes/sec there. But i suspect this to be independent
of media. So one would habe to associate the speed descriptor blocks with
the ATIP media characteristics ? How ?
*/
2006-08-15 20:37:04 +00:00
}
void mmc_read_sectors(struct burn_drive *d,
int start,
int len,
const struct burn_read_opts *o, struct buffer *buf)
{
int temp;
int errorblock, req;
struct command c;
mmc_function_spy("mmc_read_sectors");
/* ts A61009 : to be ensured by callers */
/* a ssert(len >= 0); */
/* if the drive isn't busy, why the hell are we here? */
/* ts A61006 : i second that question */
/* a ssert(d->busy); */
2006-08-15 20:37:04 +00:00
burn_print(12, "reading %d from %d\n", len, start);
memcpy(c.opcode, MMC_READ_CD, sizeof(MMC_READ_CD));
c.retry = 1;
c.oplen = sizeof(MMC_READ_CD);
temp = start;
c.opcode[5] = temp & 0xFF;
temp >>= 8;
c.opcode[4] = temp & 0xFF;
temp >>= 8;
c.opcode[3] = temp & 0xFF;
temp >>= 8;
c.opcode[2] = temp & 0xFF;
c.opcode[8] = len & 0xFF;
len >>= 8;
c.opcode[7] = len & 0xFF;
len >>= 8;
c.opcode[6] = len & 0xFF;
req = 0xF8;
/* ts A61106 : LG GSA-4082B dislikes this. key=5h asc=24h ascq=00h
2006-08-15 20:37:04 +00:00
if (d->busy == BURN_DRIVE_GRABBING || o->report_recovered_errors)
req |= 2;
*/
2006-08-15 20:37:04 +00:00
c.opcode[10] = 0;
/* always read the subcode, throw it away later, since we don't know
what we're really reading
*/
if (d->busy == BURN_DRIVE_GRABBING || (o->subcodes_audio)
|| (o->subcodes_data))
c.opcode[10] = 1;
c.opcode[9] = req;
c.page = buf;
c.dir = FROM_DRIVE;
d->issue_command(d, &c);
if (c.error) {
burn_print(12, "got an error over here\n");
burn_print(12, "%d, %d, %d, %d\n", c.sense[3], c.sense[4],
c.sense[5], c.sense[6]);
errorblock =
(c.sense[3] << 24) + (c.sense[4] << 16) +
(c.sense[5] << 8) + c.sense[6];
c.page->sectors = errorblock - start + 1;
burn_print(1, "error on block %d\n", errorblock);
burn_print(12, "error on block %d\n", errorblock);
burn_print(12, "returning %d sectors\n", c.page->sectors);
}
}
void mmc_erase(struct burn_drive *d, int fast)
{
struct command c;
mmc_function_spy("mmc_erase");
2006-08-15 20:37:04 +00:00
memcpy(c.opcode, MMC_ERASE, sizeof(MMC_ERASE));
c.opcode[1] = 16; /* IMMED set to 1 */
c.opcode[1] |= !!fast;
c.retry = 1;
c.oplen = sizeof(MMC_ERASE);
c.page = NULL;
c.dir = NO_TRANSFER;
d->issue_command(d, &c);
}
void mmc_read_lead_in(struct burn_drive *d, struct buffer *buf)
{
int len;
struct command c;
mmc_function_spy("mmc_read_lead_in");
2006-08-15 20:37:04 +00:00
len = buf->sectors;
memcpy(c.opcode, MMC_READ_CD, sizeof(MMC_READ_CD));
c.retry = 1;
c.oplen = sizeof(MMC_READ_CD);
c.opcode[5] = 0;
c.opcode[4] = 0;
c.opcode[3] = 0;
c.opcode[2] = 0xF0;
c.opcode[8] = 1;
c.opcode[7] = 0;
c.opcode[6] = 0;
c.opcode[9] = 0;
c.opcode[10] = 2;
c.page = buf;