libburnia/libburn
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Changed wrong use of "resp." in docs

Browse Source
This commit is contained in:
Thomas Schmitt
2015-08-01 13:58:24 +00:00
parent 3dcee0dcc9
commit 6a927ae867
24 changed files with 84 additions and 84 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
libburn/ecma130ab.c
View File

@@ -30,7 +30,7 @@
-------------------------------------------------------------------------
RSPC resp. P- and Q-Parity
RSPC , P- and Q-Parity
ECMA-130 Annex A prescribes to compute the parity bytes for P-columns and
Q-diagonals by RSPC based on a Galois Field GF(2^8) with enumerating
@@ -245,7 +245,7 @@ static unsigned char gflog[256] = {
#ifdef Libburn_use_h_matriceS
/* On my AMD 2x64 bit 3000 MHz processor h[i] costs about 7 % more time
than using gfpow[25-i] resp. gfpow[44-1]. I blame this on the more
than using gfpow[25-i] and gfpow[44-1]. I blame this on the more
condensed data representation which slightly increases the rate of cache
hits.
Nevertheless this effect is very likely depending on the exact cache

36
libburn/libburn.h
View File

@@ -821,7 +821,7 @@ int burn_abort_pacifier(void *handle, int patience, int elapsed);
void burn_set_verbosity(int level);
/* ts A91111 */
/** Enable resp. disable logging of SCSI commands.
/** Enable or disable logging of SCSI commands.
This call can be made at any time - even before burn_initialize().
It is in effect for all active drives and currently not very thread
safe for multiple drives.
@@ -953,7 +953,7 @@ void burn_allow_untested_profiles(int yes);
Use with driveno 0 only.
@param adr The device file address of the desired drive. Either once
obtained by burn_drive_d_get_adr() or composed skillfully by
application resp. its user. E.g. "/dev/sr0".
application or its user. E.g. "/dev/sr0".
Consider to preprocess it by burn_drive_convert_fs_adr().
@param load Nonzero to make the drive attempt to load a disc (close its
tray door, etc).
@@ -1015,7 +1015,7 @@ int burn_drive_scan(struct burn_drive_info *drive_infos[],
function is called, and the amount of automatically provided
drive shutdown :
0= drive must be ungrabbed and BURN_DRIVE_IDLE
1= try to release drive resp. accept BURN_DRIVE_GRABBING
1= try to release drive even if in state BURN_DRIVE_GRABBING
Use these two only. Further values are to be defined.
@return 1 on success, 2 if drive was already forgotten,
0 if not permissible, <0 on other failures,
@@ -1291,8 +1291,8 @@ int burn_drive_get_start_end_lba(struct burn_drive *drive,
burn_drive_get_start_end_lba(d, &start_lba, &end_lba, 0),
burn_lba_to_msf(start_lba, &m_li, &s_li, &f_li) and
burn_lba_to_msf(end_lba, &m_lo, &s_lo, &f_lo).
@param m_li "minute" part of ATIP lead-in resp. start_lba
@param s_li "second" of lead-in resp. start_lba
@param m_li "minute" part of ATIP lead-in or start_lba
@param s_li "second" of lead-in or start_lba
@param f_li "frame" of lead-in
@param m_lo "minute" part of ATIP lead-out
@param s_lo "second" of lead-out
@@ -1423,7 +1423,7 @@ int burn_disc_track_lba_nwa(struct burn_drive *d, struct burn_write_opts *o,
/* ts B10525 */
/** Tells whether a previous attempt to determine the Next Writeable Address
of the upcomming track reveiled that the READ TRACK INFORMATION Damage Bit
is set for this track, resp. that no valid writable address is available.
is set for this track and that no valid writable address is available.
See MMC-5 6.27.3.7 Damage Bit, 6.27.3.11 NWA_V (NWA valid)
@param d The drive to query.
@param flag Bitfield for control purposes (unused yet, submit 0)
@@ -2116,8 +2116,7 @@ int burn_session_set_cdtext_par(struct burn_session *s,
""
/* ts B11206 */
/** Obtain the current settings as of burn_session_set_cdtext_par() resp.
by default.
/** Obtain the current settings as of burn_session_set_cdtext_par()
@param s Session which to inquire
@param char_codes Will return Character Codes for block 0 to 7
@param copyrights Will return Copyright bytes for block 0 to 7
@@ -2537,7 +2536,7 @@ int burn_track_clear_indice(struct burn_track *t, int flag);
/* ts B20110 */
/** Define whether a pre-gap shall be written before the track and how many
sectors this pre-gap shall have. A pre-gap is written in the range of track
index 0 and contains zeros resp. silence. No bytes from the track source
index 0 and contains zeros (audio silence). No bytes from the track source
will be read for writing the pre-gap.
This setting affects only CD SAO write runs.
The first track automatically gets a pre-gap of at least 150 sectors. Its
@@ -2854,7 +2853,7 @@ void burn_fifo_next_interval(struct burn_source *fifo, int *interval_min_fill);
data have arrived or until it becomes clear that this will not happen.
The call may be repeated with increased bufsize. It will always yield
the bytes beginning from the first one in the fifo.
@param fifo The fifo object to inquire resp. start
@param fifo The fifo object to start and to inquire
@param buf Pointer to memory of at least bufsize bytes where to
deliver the peeked data.
@param bufsize Number of bytes to peek from the start of the fifo data
@@ -2893,7 +2892,7 @@ int burn_fifo_fill(struct burn_source *fifo, int fill, int flag);
int burn_track_set_size(struct burn_track *t, off_t size);
/** Tells how many sectors a track will have on disc, resp. already has on
/** Tells how many sectors a track will have on disc, or already has on
disc. This includes offset, payload, tail, and post-gap, but not pre-gap.
The result is NOT RELIABLE with tracks of undefined length
*/
@@ -2989,7 +2988,7 @@ int burn_write_opts_set_write_type(struct burn_write_opts *opts,
made, i.e. immediately before burn_disc_write().
@param opts The nearly complete write opts to change
@param disc The already composed session and track model
@param reasons This text string collects reasons for decision resp. failure
@param reasons This text string collects reasons for decision or failure
@param flag Bitfield for control purposes:
bit0= do not choose type but check the one that is already set
bit1= do not issue error messages via burn_msgs queue
@@ -4063,16 +4062,17 @@ int burn_drive_get_drive_role(struct burn_drive *d);
will get role 5.
Candidates are drive addresses of the form stdio:/dev/fd/# , where # is
the integer number of an open file descriptor. If this descriptor was
opened read-only resp. write-only, then it gets role 4 resp. role 5.
opened read-only or write-only, then it gets role 4 or role 5,
respectively.
Other paths may get tested by an attempt to open them for read-write
(role 2) resp. read-only (role 4) resp. write-only (role 5). See bit1.
(role 2) or read-only (role 4) or write-only (role 5). See bit1.
@param allowed Bitfield for control purposes:
bit0= Enable roles 4 and 5 for drives which get
aquired after this call
bit1= with bit0:
Test whether the file can be opened for
read-write resp. read-only resp. write-only.
Classify as roles 2 resp. 4 resp. 5.
read-write, read-only, or write-only.
Classify as roles 2, 4, 5.
bit2= with bit0 and bit1:
Classify files which cannot be opened at all
as role 0 : useless dummy.
@@ -4104,7 +4104,7 @@ void burn_allow_drive_role_4(int allowed);
The string must be shorter than BURN_DRIVE_ADR_LEN.
@param drive_role2 Role as burn_drive_get_drive_role() would attribute
to adr2 if it was a drive. Use value 2 for checking track
sources resp. pseudo-drive addresses without "stdio:".
sources or pseudo-drive addresses without "stdio:".
Use 1 for checking drive addresses including those with
prefix "stdio:".
@return 1= adr2 leads to d1 , 0= adr2 seems not to lead to d1,
@@ -4243,7 +4243,7 @@ BURN_END_DECLS
/* ts A91112 */
/* Do not probe CD modes but declare only data and audio modes supported.
For other modes resp. real probing one has to call
For other modes or real probing one has to call
burn_drive_probe_cd_write_modes().
*/

2
libburn/sg-dummy.c
View File

@@ -146,7 +146,7 @@ int scsi_enumerate_drives(void)
/** Tells wether libburn has the given drive in use or exclusively reserved.
If it is "open" then libburn will eventually call sg_release() on it when
it is time to give up usage resp. reservation.
it is time to give up usage and reservation.
*/
/** Published as burn_drive.drive_is_open() */
int sg_drive_is_open(struct burn_drive * d)

2
libburn/sg-freebsd-port.c
View File

@@ -446,7 +446,7 @@ int scsi_enumerate_drives(void)
/** Tells wether libburn has the given drive in use or exclusively reserved.
If it is "open" then libburn will eventually call sg_release() on it when
it is time to give up usage resp. reservation.
it is time to give up usage and reservation.
*/
/** Published as burn_drive.drive_is_open() */
int sg_drive_is_open(struct burn_drive * d)

2
libburn/sg-libcdio.c
View File

@@ -529,7 +529,7 @@ ex:;
/** Tells whether libburn has the given drive in use or exclusively reserved.
If it is "open" then libburn will eventually call sg_release() on it when
it is time to give up usage resp. reservation.
it is time to give up usage and reservation.
*/
/** Published as burn_drive.drive_is_open() */
int sg_drive_is_open(struct burn_drive * d)

6
libburn/sg-linux.c
View File

@@ -1413,7 +1413,7 @@ static int add_proc_info_drives(int flag)
char **list= NULL;
if (burn_sg_use_family != 0)
return(1); /* Looking only for sr resp. scd resp. sg */
return(1); /* Looking only for sr , scd , sg */
ret = proc_sys_dev_cdrom_info(&list, &list_count, 0);
if (ret <= 0)
@@ -1651,7 +1651,7 @@ return_1_pre_proc:;
and accessability. If burn activities are prone to external interference
on your system it is also necessary to obtain exclusive access locks on
the drives.
Hand over each accepted drive to enumerate_common() resp. its replacement
Hand over each accepted drive to enumerate_common() or its replacement
within your port.
See FreeBSD port sketch sg-freebsd-port.c for such an implementation.
@@ -1677,7 +1677,7 @@ int scsi_enumerate_drives(void)
/** Tells wether libburn has the given drive in use or exclusively reserved.
If it is "open" then libburn will eventually call sg_release() on it when
it is time to give up usage resp. reservation.
it is time to give up usage and reservation.
*/
/** Published as burn_drive.drive_is_open() */
int sg_drive_is_open(struct burn_drive * d)

2
libburn/sg-netbsd.c
View File

@@ -423,7 +423,7 @@ ex:;
/** Tells whether libburn has the given drive in use or exclusively reserved.
If it is "open" then libburn will eventually call sg_release() on it when
it is time to give up usage resp. reservation.
it is time to give up usage and reservation.
*/
/** Published as burn_drive.drive_is_open() */
int sg_drive_is_open(struct burn_drive * d)

2
libburn/sg-solaris.c
View File

@@ -590,7 +590,7 @@ ex:;
/** Tells whether libburn has the given drive in use or exclusively reserved.
If it is "open" then libburn will eventually call sg_release() on it when
it is time to give up usage resp. reservation.
it is time to give up usage and reservation.
*/
/** Published as burn_drive.drive_is_open() */
int sg_drive_is_open(struct burn_drive * d)