From 78984536f511f2333b479bf67a7d0f685422d7c7 Mon Sep 17 00:00:00 2001
From: Thomas Schmitt <scdbackup@gmx.net>
Date: Sat, 28 Oct 2006 12:47:43 +0000
Subject: [PATCH] Corrected misnaming of my development directory

---
 cdrskin/add_ts_changes_to_libburn_0_2_3 | 191 ------------------------
 cdrskin/add_ts_changes_to_libburn_0_2_4 |   4 +-
 2 files changed, 2 insertions(+), 193 deletions(-)
 delete mode 100755 cdrskin/add_ts_changes_to_libburn_0_2_3

diff --git a/cdrskin/add_ts_changes_to_libburn_0_2_3 b/cdrskin/add_ts_changes_to_libburn_0_2_3
deleted file mode 100755
index a4af63a..0000000
--- a/cdrskin/add_ts_changes_to_libburn_0_2_3
+++ /dev/null
@@ -1,191 +0,0 @@
-#!/bin/sh
-
-set -x
-
-# This script documents how this cdrskin version was derived from
-# a vanilla libburn version. It is not intended nor needed for any
-# use of cdrskin but included here only to show the technical 
-# relationship between both projects - which are close friends
-# and issue roughly the same software.
-#
-# Package maintainers are advised to cover rather libburn than
-# cdrskin unless they put only emphasis on the cdrecord emulation
-# provided by cdrskin. libburn contains cdrskin - cdrskin is an
-# oscillating, friendly and coordinated fork of libburn.
-# 
-# Script results are a source tarball and two binaries
-# one dynamic and one static in respect to system libs.
-# Both binaries are static in respect to libburn.
-#
-# The script is to be run in the directory above the toplevel
-# directory of libburn resp. cdrskin development.
-#
-# libburn version used:  http://libburn.pykix.org
-# Downloaded by:
-#  $ svn co http://libburn-svn.pykix.org/trunk libburn_pykix
-# packed up in a tarball just to save it from inadverted changes by
-#  $ tar czf libburn_svn.tgz libburn_pykix
-original="./libburn_svn.tgz"
-# Historic moments:
-# original="./libburn_svn_A60815.tgz"
-# original="./libburn_cdrskin_A60819.tgz"
-
-# The top level directory in that snapshot is named
-intermediate="./libburn_pykix"
-
-# My changes are in libburn-0.2.3.ts.develop , mainly in ./cdrskin
-
-changes="./libburn-0.2.3.ts.develop"
-skin_rev="0.2.3"
-
-# The result directory and the name of the result tarballs
-target="./cdrskin-${skin_rev}"
-cdrskin_tarball="./cdrskin-${skin_rev}.tar.gz"
-cdrskin_tarball_svn="./cdrskin-${skin_rev}.svn.tar.gz"
-
-# (This once earned me an embarrassingly blooping source tarball)
-# compile_dir="$changes"
-
-compile_dir="$target"
-compile_cmd="./cdrskin/compile_cdrskin.sh"
-compile_static_opts="-static"
-compile_result="cdrskin/cdrskin"
-
-bintarget_dynamic="cdrskin_${skin_rev}-x86-suse9_0"
-bintarget_static="$bintarget_dynamic"-static
-
-if test -d "$changes"
-then
-  dummy=dummy
-else
-  echo "$0 : FATAL : no directory $changes" >&2
-  exit 1
-fi
-
-for i in "$target" "$intermediate"
-do
-  if test -e "$i"
-  then
-    echo "$0 : FATAL : already existing $i" >&2
-    exit 2
-  fi
-done
-
-if test -f "$original"
-then
- dummy=dummy
-else
-  echo "$0 : FATAL : no file $original" >&2
-  exit 3
-fi
-
-
-# Unpack SVN snapshot.
-tar xzf "$original"
-
-
-# Rename the directory to the cdrskin name
-mv "$intermediate" "$target"
-
-
-# Copy the changes from the development tree
-# 
-cdrskin_dir="$changes"/cdrskin
-libburn_dir="$changes"/libburn
-cdrskin_target="$target"/cdrskin
-libburn_target="$target"/libburn
-
-# Create version timestamp
-timestamp="$(date -u '+%Y.%m.%d.%H%M%S')"
-echo "$timestamp"
-echo '#define Cdrskin_timestamP "'"$timestamp"'"' >"$cdrskin_dir"/cdrskin_timestamp.h
-
-# Add the cdrskin files
-if test -e "$cdrskin_target"
-then
-  rm -rf "$cdrskin_target"
-fi
-cp -a "$cdrskin_dir" "$cdrskin_target"
-
-# Remove copied binaries
-rm "$cdrskin_target"/cdrfifo
-rm "$cdrskin_target"/cdrskin
-rm "$cdrskin_target"/cleanup
-rm "$cdrskin_target"/cdrskin_std
-rm "$cdrskin_target"/cdrskin_new
-rm "$cdrskin_target"/*.o
-
-# Remove unwanted SVN stuff (TODO: avoid downloading it)
-for i in "$target"/.svn "$target"/*/.svn
-do
-  if test "$i" = "$target"'/*/.svn'
-  then
-    dummy=dummy
-  else
-    if test -e "$i"
-    then
-      rm -rf "$i"
-    fi
-  fi
-done
-
-## No more : Add own libburn-README in toplevel
-# cp -a "$changes"/README "$target"
-
-## No more : Add modified Makefile.am
-# cp -a "$changes"/Makefile.am "$target"
-
-
-# Make SVN state tarball for the libburn team
-tar czf "$cdrskin_tarball_svn" "$target"
-
-
-# Get over dependecy on autotools. Rely only on cc, make et. al.
-# This is not the same as "make dist" but i can do it without
-# having to evaluate the quality of said "make dist"
-#
-( cd "$target" ; ./bootstrap )
-
-# Remove unwanted stuff after bootstrap
-for i in "$target"/autom4te.cache
-do
-  if echo "$i" | grep '\*' >/dev/null
-  then
-    dummy=dummy
-  else
-    if test -e "$i"
-    then
-      rm -rf "$i"
-    fi
-  fi
-done
-
-
-# Pack it up to the new libburn+cdrskin-tarball
-tar czf "$cdrskin_tarball" "$target"
-
-# Produce a static and a dynamic binary
-(
- cd "$compile_dir" || exit 1
- ./configure
- make
- $compile_cmd -do_strip
- cp "$compile_result" "../$bintarget_dynamic"
- if test -n "$compile_static_opts"
- then
-   $compile_cmd $compile_static_opts -do_strip
-   cp "$compile_result" "../$bintarget_static"
- fi
-)
-
-# Remove the build area
-# Disable this for debugging the merge process
-rm -rf "$target"
-
-# Show the result
-./"$bintarget_dynamic" -version
-./"$bintarget_static" -version
-ls -l "$cdrskin_tarball"
-ls -l "$bintarget_dynamic"
-ls -l "$bintarget_static"
-
diff --git a/cdrskin/add_ts_changes_to_libburn_0_2_4 b/cdrskin/add_ts_changes_to_libburn_0_2_4
index cda78ad..975c565 100755
--- a/cdrskin/add_ts_changes_to_libburn_0_2_4
+++ b/cdrskin/add_ts_changes_to_libburn_0_2_4
@@ -33,9 +33,9 @@ original="./libburn_svn.tgz"
 # The top level directory in that snapshot is named
 intermediate="./libburn_pykix"
 
-# My changes are in libburn-0.2.4.ts.develop , mainly in ./cdrskin
+# My changes are in libburn-0.2.3.ts.develop , mainly in ./cdrskin
 
-changes="./libburn-0.2.4.ts.develop"
+changes="./libburn-0.2.3.ts.develop"
 skin_rev="0.2.4"
 
 # The result directory and the name of the result tarballs