diff --git a/README b/README index 58fa734..f23bbf4 100644 --- a/README +++ b/README @@ -1,10 +1,10 @@ ------------------------------------------------------------------------------ - libburn.pykix.org + libburnia.pykix.org ------------------------------------------------------------------------------ This all is under GPL. (See GPL reference, our clarification and commitment at the end of this text) ------------------------------------------------------------------------------ -libburn.pykix.org +libburnia.pykix.org By Mario Danic and Thomas Schmitt Copyright (C) 2006 Mario Danic, Thomas Schmitt @@ -12,14 +12,14 @@ Still containing parts of Libburn. By Derek Foreman and Ben Jansens Copyright (C) 2002-2006 Derek Foreman and Ben Jansens -These parts are to be replaced by own code of above libburn.pykix.org-copyright -holders and then libburn.pykix.org is to be their sole copyright. +These parts are to be replaced by own code of above libburnia.pykix.org +copyright holders and then libburnia.pykix.org is to be their sole copyright. This is done to achieve the right to issue the clarification and the commitment as written at the end of this text. The rights and merits of the Libburn-copyright holders Derek Foreman and Ben Jansens will be duely respected. -This libburn.pykix.org toplevel README (C) 2006 Thomas Schmitt +This libburnia.pykix.org toplevel README (C) 2006 Thomas Schmitt ------------------------------------------------------------------------------ Build and Installation @@ -27,14 +27,14 @@ This libburn.pykix.org toplevel README (C) 2006 Thomas Schmitt Our build system is based on autotools. For preparing the build of a SVN snapshot you will need autotools of at least version 1.7. Check out from SVN by - svn co http://libburn-svn.pykix.org/libburn/trunk libburn_pykix + svn co http://libburnia-svn.pykix.org/libburn/trunk libburn_pykix go into directory libburn_pykix and apply autotools by ./bootstrap Alternatively you may unpack a release tarball for which you do not need autotools installed. -To build libburn.pykix.org and its subprojects it should be sufficient to go +To build a libburnia.pykix.org subproject it should be sufficient to go into its toplevel directory (here: "libburn_pykix") and execute ./configure make @@ -43,18 +43,18 @@ To make the libraries accessible for running resp. developing applications make install -The other half of the project, libisofs, is hosted in the libburn SVN, too: - svn co http://libburn-svn.pykix.org/libisofs/trunk libisofs_pykix +The other half of the project, libisofs, is hosted in the libburnia SVN, too: + svn co http://libburnia-svn.pykix.org/libisofs/trunk libisofs_pykix See README file there. ------------------------------------------------------------------------------ - Overview of libburn.pykix.org + Overview of libburnia.pykix.org -libburn.pykix.org is an open-source software project for reading, mastering and -writing optical discs. For now this means only CD-R and CD-RW. +libburnia.pykix.org is an open-source software project for reading, mastering +and writing optical discs. For now this means only CD-R and CD-RW. The project comprises of several more or less interdependent parts which together strive to be a usable foundation for application development. @@ -70,7 +70,7 @@ We do have a workable code base for burning data CDs, though. The burn API is quite comprehensively documented and can be used to build a presentable application. We do have a functional binary which emulates parts of cdrecord in order to -prove that usability, and in order to allow you to explore libburn's scope +prove that usability, and in order to allow you to explore libburnia's scope by help of existing cdrecord frontends. The project components (list subject to growth, hopefully): @@ -197,9 +197,9 @@ Project history as far as known to me: ------------------------------------------------------------------------------ Clarification in my name and in the name of Mario Danic, upcoming copyright -holders on toplevel of libburn. To be fully in effect after the remaining other -copyrighted code has been replaced by ours and by copyright-free contributions -of our friends: +holders on toplevel of libburnia. To be fully in effect after the remaining +other copyrighted code has been replaced by ours and by copyright-free +contributions of our friends: ------------------------------------------------------------------------------ We, the copyright holders, agree on the interpretation that diff --git a/cdrskin/README b/cdrskin/README index bc531ac..3325461 100644 --- a/cdrskin/README +++ b/cdrskin/README @@ -1,5 +1,5 @@ ------------------------------------------------------------------------------ - libburn.pykix.org scdbackup.sourceforge.net/cdrskin_eng.html + libburnia.pykix.org scdbackup.sourceforge.net/cdrskin_eng.html ------------------------------------------------------------------------------ Installation instructions at about line 60. First the legal stuff: ------------------------------------------------------------------------------ @@ -7,24 +7,24 @@ This all is under GPL. (See GPL reference, our clarification and commitment at the end of this text) ------------------------------------------------------------------------------ Based on and sub project of: -libburn.pykix.org +libburnia.pykix.org By Mario Danic and Thomas Schmitt Copyright (C) 2006 Mario Danic, Thomas Schmitt -libburn.pykix.org is inspired by and in other components still containing +libburnia.pykix.org is inspired by and in other components still containing parts of Libburn. By Derek Foreman and Ben Jansens Copyright (C) 2002-2006 Derek Foreman and Ben Jansens See toplevel README for an overview of the current copyright situation in -libburn.pykix.org. +libburnia.pykix.org. ------------------------------------------------------------------------------ My thanks to the above authors (except myself, of course) for making the following possible. cdrskin. By Thomas Schmitt -Integrated sub project of libburn.pykix.org but also published via: +Integrated sub project of libburnia.pykix.org but also published via: http://scdbackup.sourceforge.net/cdrskin_eng.html http://scdbackup.sourceforge.net/cdrskin-0.2.7.tar.gz Copyright (C) 2006 Thomas Schmitt @@ -64,7 +64,7 @@ Obtain cdrskin-0.2.7.tar.gz, take it to a directory of your choice and do: tar xzf cdrskin-0.2.7.tar.gz cd cdrskin-0.2.7 -Or obtain a libburn.pykix.org SVN snapshot, +Or obtain a libburnia.pykix.org SVN snapshot, go into the toplevel directory of the snapshot (e.g. cd libburn_pykix ), and execute the autotools script ./bootstrap . Use autools version >= 1.7 . diff --git a/cdrskin/cdrskin.c b/cdrskin/cdrskin.c index 5ba826f..b59e22b 100644 --- a/cdrskin/cdrskin.c +++ b/cdrskin/cdrskin.c @@ -77,8 +77,9 @@ restart of libburn. ------------------------------------------------------------------------------ This program is currently copyright Thomas Schmitt only. -The copyrights of several components of libburn.pykix.org are willfully tangled -at toplevel to form an irrevocable commitment to true open source spirit. +The copyrights of several components of libburnia.pykix.org are willfully +tangled at toplevel to form an irrevocable commitment to true open source +spirit. We have chosen the GPL for legal compatibility and clearly express that it shall not hamper the use of our software by non-GPL applications which show otherwise the due respect to the open source community. @@ -91,7 +92,7 @@ usage in due open source spirit will be made possible somehow and in the particular special case. I will not raise public protest if you spawn yourself a BSD license from an (outdated) cdrskin.c which still bears that old promise. Note that this extended commitment is valid only for cdrskin.[ch], -cdrfifo.[ch] and cleanup.[ch], but not for libburn.pykix.org as a whole. +cdrfifo.[ch] and cleanup.[ch], but not for libburnia.pykix.org as a whole. cdrskin is originally inspired by libburn-0.2/test/burniso.c : (c) Derek Foreman and Ben Jansens @@ -243,7 +244,7 @@ or #define Cdrskin_is_erasable_on_load_is_brokeN 1 #endif -/** http://libburn.pykix.org/ticket/41 reports of big trouble without +/** http://libburnia.pykix.org/ticket/41 reports of big trouble without padding any track to a full sector */ #define Cdrskin_all_tracks_with_sector_paD 1 @@ -2028,7 +2029,7 @@ set_dev:; "used as track source. If it is \"-\" then stdin is used.\n"); printf("cdrskin : http://scdbackup.sourceforge.net/cdrskin_eng.html\n"); printf(" mailto:scdbackup@gmx.net (Thomas Schmitt)\n"); - printf("libburn : http://libburn.pykix.org\n"); + printf("libburn : http://libburnia.pykix.org\n"); printf("cdrecord : ftp://ftp.berlios.de/pub/cdrecord/\n"); printf("My respect to the authors of cdrecord and libburn.\n"); printf("scdbackup: http://scdbackup.sourceforge.net/main_eng.html\n"); @@ -2165,7 +2166,7 @@ set_severities:; } else if(strcmp(argv[i],"-version")==0) { printf( - "Cdrecord 2.01-Emulation Copyright (C) 2006, see libburn.pykix.org\n"); + "Cdrecord 2.01-Emulation Copyright (C) 2006, see libburnia.pykix.org\n"); printf("libburn version : %s\n",Cdrskin_libburn_versioN); #ifndef Cdrskin_extra_leaN diff --git a/cdrskin/cdrskin_eng.html b/cdrskin/cdrskin_eng.html index 1d96fdf..947002c 100644 --- a/cdrskin/cdrskin_eng.html +++ b/cdrskin/cdrskin_eng.html @@ -2,7 +2,7 @@ - + cdrskin homepage english @@ -12,7 +12,7 @@
- +Döner mit Scharf

Homepage of

cdrskin

@@ -34,7 +34,7 @@

Hardware requirements:

A CD recorder suitable for -libburn.pykix.org +libburnia.pykix.org (SCSI or IDE/ATAPI writers compliant to mmc-3 standard).

@@ -56,7 +56,7 @@ GPL software included:
libburn-0.2.6
-
(by Derek Foreman, Ben Jansens, and team of libburn.pykix.org)
+
(by Derek Foreman, Ben Jansens, and team of libburnia.pykix.org)
transfers data to CD

@@ -227,8 +227,8 @@ Enhancements towards previous stable version cdrskin-0.2.4:
cdrskin_0.2.7 -help
 
Maintainers of cdrskin unstable packages please use SVN of - libburn.pykix.org
-
Download: svn co http://libburn-svn.pykix.org/libburn/trunk libburn_pykix + libburnia.pykix.org +
Download: svn co http://libburnia-svn.pykix.org/libburn/trunk libburn_pykix
Build: cd libburn_pykix ; ./bootstrap ; ./configure ; make
@@ -377,10 +377,11 @@ the gestures necessary for their cdrecord applications. Contact me. Let's see what we can achieve.

-I am aware that libburn and cdrskin still have way to go until you can simply -install cdrskin as cdrecord and may expect any application to run with it. -Currently i do not encourage this approach, but of course such a replacement -opportunity is the long term goal of a cdrecord compatibility wrapper. +libburn and cdrskin are now mature enough to substitute cdrecord in its +major use cases of CD burning. It is possible to foist cdrskin on various +software packages if it gets falsely named "cdrecord". +I do not encourage this approach, but of course such a replacement +opportunity is the goal of a cdrecord compatibility wrapper.

It is very important to me that this project is not perceived as hostile @@ -395,9 +396,8 @@ I owe him much. For cdrecord, for mkisofs, for star. Chapeau.

--> - +cdrskin - Döner mit Scharf -

Homepage of



Enjoying free Open Source hosting by www.webframe.org
diff --git a/cdrskin/cdrskin_timestamp.h b/cdrskin/cdrskin_timestamp.h index 0e622e2..73bca60 100644 --- a/cdrskin/cdrskin_timestamp.h +++ b/cdrskin/cdrskin_timestamp.h @@ -1 +1 @@ -#define Cdrskin_timestamP "2006.12.02.201529" +#define Cdrskin_timestamP "2006.12.03.155703" diff --git a/doc/comments b/doc/comments index 5f7b2dd..ff06baf 100644 --- a/doc/comments +++ b/doc/comments @@ -1,11 +1,11 @@ /** @author Mario Danic, Thomas Schmitt - @mainpage Libburn Documentation Index + @mainpage Libburnia Documentation Index @section intro Introduction -Libburn is an open-source library for reading, mastering and writing +Libburnia is an open-source project for reading, mastering and writing optical discs. For now this means only CD-R and CD-RW. The project comprises of several more or less interdependent parts which @@ -84,7 +84,7 @@ It can list the available devices, can blank a CD-RW and can burn to CD-R or CD-RW. It's main purpose, nevertheless, is to show you how to use libburn and also -to serve the libburn team as reference application. libburner does indeed +to serve the libburnia team as reference application. libburner does indeed define the standard way how above three gestures can be implemented and stay upward compatible for a good while. diff --git a/test/libburner.c b/test/libburner.c index fe64767..57a477e 100644 --- a/test/libburner.c +++ b/test/libburner.c @@ -7,10 +7,10 @@ /** Overview libburner is a minimal demo application for the library libburn as provided - on http://libburn.pykix.org . It can list the available devices, can + on http://libburnia.pykix.org . It can list the available devices, can blank a CD-RW and can burn to CD-R or CD-RW. It's main purpose, nevertheless, is to show you how to use libburn and also - to serve the libburn team as reference application. libburner.c does indeed + to serve the libburnia team as reference application. libburner.c does indeed define the standard way how above three gestures can be implemented and stay upward compatible for a good while. @@ -563,7 +563,7 @@ int main(int argc, char **argv) if (ret) exit(ret); - printf("Initializing libburn.pykix.org ...\n"); + printf("Initializing libburnia.pykix.org ...\n"); if (burn_initialize()) printf("Done\n"); else { @@ -624,7 +624,7 @@ Be also invited to study the code of cdrskin/cdrskin.c et al. Clarification in my name and in the name of Mario Danic, copyright holder -on toplevel of libburn. To be fully in effect after the remaining other +on toplevel of libburnia. To be fully in effect after the remaining other copyrighted code has been replaced by ours and by copyright-free contributions of our friends: