Version leap to 0.2.6

Cette révision appartient à :
Thomas Schmitt 2006-11-23 10:26:18 +00:00
Parent 35a1a1f7d7
révision de02cc26f9
9 fichiers modifiés avec 92 ajouts et 122 suppressions

Voir le fichier

@ -103,7 +103,7 @@ test_structest_SOURCES = test/structest.c
## cdrskin construction site - ts A60816
cdrskin_cdrskin_CPPFLAGS = -Ilibburn
cdrskin_cdrskin_CFLAGS = -DCdrskin_libburn_0_2_3
cdrskin_cdrskin_CFLAGS = -DCdrskin_libburn_0_2_6
cdrskin_cdrskin_LDADD = $(libburn_libburn_la_OBJECTS) $(THREAD_LIBS)
cdrskin_cdrskin_SOURCES = cdrskin/cdrskin.c cdrskin/cdrfifo.c cdrskin/cdrfifo.h cdrskin/cdrskin_timestamp.h
##

Voir le fichier

@ -26,12 +26,12 @@ following possible.
cdrskin. By Thomas Schmitt <scdbackup@gmx.net>
Integrated sub project of libburn.pykix.org but also published via:
http://scdbackup.sourceforge.net/cdrskin_eng.html
http://scdbackup.sourceforge.net/cdrskin-0.2.5.tar.gz
http://scdbackup.sourceforge.net/cdrskin-0.2.6.pl01.tar.gz
Copyright (C) 2006 Thomas Schmitt
------------------------------------------------------------------------------
On top of libburn there is implemented cdrskin 0.2.5, a limited cdrecord
On top of libburn there is implemented cdrskin 0.2.6, a limited cdrecord
compatibility wrapper which allows to use some libburn features from
the command line.
Interested users of cdrecord are invited to participate in the development
@ -59,16 +59,16 @@ systems, including 64 bit systems. (Further reports are welcome.)
Compilation, First Glimpse, Installation
Obtain cdrskin-0.2.5.tar.gz , take it to a directory of your choice and do:
Obtain cdrskin-0.2.6.pl01.tar.gz, take it to a directory of your choice and do:
tar xzf cdrskin-0.2.5.tar.gz
cd cdrskin-0.2.5
tar xzf cdrskin-0.2.6.pl01.tar.gz
cd cdrskin-0.2.6
Or obtain a libburn.pykix.org SVN snapshot,
go into the toplevel directory of the snapshot (e.g. cd libburn_pykix ),
and execute the autotools script ./bootstrap . Use autools version >= 1.7 .
Within that toplevel directory of either cdrskin-0.2.5 or libburn then execute:
Within that toplevel directory of either cdrskin-0.2.6 or libburn then execute:
./configure
make

Voir le fichier

@ -36,10 +36,13 @@ intermediate="./libburn_pykix"
# My changes are in libburn-0.2.3.ts.develop , mainly in ./cdrskin
changes="./libburn-0.2.3.ts.develop"
skin_rev="0.2.4"
skin_release="0.2.6"
patch_level=".pl01"
skin_rev="$skin_release""$patch_level"
# The result directory and the name of the result tarballs
target="./cdrskin-${skin_rev}"
target="./cdrskin-${skin_release}"
cdrskin_tarball="./cdrskin-${skin_rev}.tar.gz"
cdrskin_tarball_svn="./cdrskin-${skin_rev}.svn.tar.gz"

Voir le fichier

@ -36,7 +36,7 @@ intermediate="./libburn_pykix"
# My changes are in libburn-0.2.3.ts.develop , mainly in ./cdrskin
changes="./libburn-0.2.3.ts.develop"
skin_rev="0.2.5"
skin_rev="0.2.7"
# The result directory and the name of the result tarballs
target="./cdrskin-${skin_rev}"

Voir le fichier

@ -123,7 +123,7 @@ or
/** The official program version */
#ifndef Cdrskin_prog_versioN
#define Cdrskin_prog_versioN "0.2.5"
#define Cdrskin_prog_versioN "0.2.6"
#endif
/** The source code release timestamp */
@ -156,14 +156,25 @@ or
#endif /* Cdrskin_libburn_cvs_A60220_tS */
#ifdef Cdrskin_libburn_0_2_2
#define Cdrskin_libburn_versioN "0.2.2"
#ifdef Cdrskin_libburn_0_2_6
#define Cdrskin_libburn_versioN "0.2.6"
#define Cdrskin_libburn_from_pykix_svN 1
#endif /* Cdrskin_libburn_0_2_6 */
#ifndef Cdrskin_libburn_versioN
#define Cdrskin_libburn_versioN "0.2.6"
#define Cdrskin_libburn_from_pykix_svN 1
#endif
#ifdef Cdrskin_libburn_0_2_3
#define Cdrskin_libburn_versioN "0.2.3"
#define Cdrskin_libburn_from_pykix_svN 1
#ifdef Cdrskin_libburn_from_pykix_svN
#ifndef Cdrskin_oldfashioned_api_usE
#define Cdrskin_libburn_does_ejecT 1
#define Cdrskin_libburn_has_drive_get_adR 1
#define Cdrskin_progress_track_does_worK 1
#define Cdrskin_is_erasable_on_load_does_worK 1
#define Cdrskin_grab_abort_does_worK 1
#define Cdrskin_allow_libburn_taO 1
#define Cdrskin_libburn_has_is_enumerablE 1
#define Cdrskin_libburn_has_convert_fs_adR 1
#define Cdrskin_libburn_has_convert_scsi_adR 1
@ -178,21 +189,6 @@ or
#define Cdrskin_libburn_has_pretend_fulL 1
#define Cdrskin_libburn_has_multI 1
#define Cdrskin_libburn_has_buffer_min_filL 1
#endif
#ifndef Cdrskin_libburn_versioN
#define Cdrskin_libburn_versioN "0.2.2"
#define Cdrskin_libburn_from_pykix_svN 1
#endif
#ifdef Cdrskin_libburn_from_pykix_svN
#define Cdrskin_libburn_does_ejecT 1
#define Cdrskin_libburn_has_drive_get_adR 1
#define Cdrskin_progress_track_does_worK 1
#define Cdrskin_is_erasable_on_load_does_worK 1
#define Cdrskin_grab_abort_does_worK 1
#define Cdrskin_allow_libburn_taO 1
#ifdef Cdrskin_new_api_tesT
@ -204,14 +200,10 @@ or
#define Cdrskin_atip_speed_is_oK 1
#endif
#endif
#endif /* Cdrskin_new_api_tesT */
#ifdef Cdrskin_oldfashioned_api_usE
/* switch back to pre-0.2.2 libburn usage */;
#endif
#endif /* ! Cdrskin_oldfashioned_api_usE */
#endif /* Cdrskin_libburn_from_pykix_svN */

Voir le fichier

@ -51,7 +51,7 @@ A CD recorder suitable for
GPL software included:<BR>
</H2>
<DL>
<DT>libburn-0.2.3 stabilized SVN snapshot</DT>
<DT>libburn-0.2.6</DT>
<DD>(by Derek Foreman, Ben Jansens, and team of libburn.pykix.org)</DD>
<DD>transfers data to CD</DD>
</DL>
@ -99,9 +99,7 @@ wishes as well as on the development of libburn.</DT>
<DD>$ cdrskin -v dev=/dev/dvd blank=fast -eject</DD>
<DT>Write ISO-9660 filesystem image:</DT>
<DD>$ cdrskin -v dev=/dev/hdc speed=12 fs=8m driveropts=burnfree -sao -eject padsize=300k my_image.iso</DD>
<DT>Write compressed afio archive on-the-fly via cdrskin-0.2.4 :</DT>
<DD>$ find . | afio -oZ - | cdrskin -v dev=0,1,0 fs=32m speed=8 driveropts=burnfree padsize=300k -sao tsize=650m -</DD>
<DT>Write compressed afio archive on-the-fly via cdrskin-0.2.5 :</DT>
<DT>Write compressed afio archive on-the-fly :</DT>
<DD>$ find . | afio -oZ - | cdrskin -v dev=0,1,0 fs=32m speed=8 driveropts=burnfree padsize=300k -tao -</DD>
<DT>Write audio tracks:</DT>
<DD>$ cdrskin -v dev=ATA:1,0,0 speed=48 driveropts=burnfree -sao track1.wav track2.au -audio -swab track3.raw
@ -125,13 +123,7 @@ wishes as well as on the development of libburn.</DT>
<UL>
<DT></DT>
<LI>
Burns only a single closed session. No -multi option yet.
Note: Development version 0.2.5 offers multi-session now. See below.
</LI>
<LI>
No TAO mode in cdrskin-0.2.4 and therefore no writing on-the-fly without
a predefined source size.<BR>
Note: Development version 0.2.5 offers TAO now. See below.
Appending sessions to unclosed media is restricted to write mode TAO.
</LI>
<LI>
cdrskin -scanbus or --devices hangs for quite a while if there is
@ -153,7 +145,7 @@ rw-permissions and retry the bus scan as non-superuser.
<P>
<DL>
<DT>Download as source code (see README):</DT>
<DD><A HREF="cdrskin-0.2.4.pl01.tar.gz">cdrskin-0.2.4.pl01.tar.gz</A>
<DD><A HREF="cdrskin-0.2.6.pl01.tar.gz">cdrskin-0.2.6.pl01.tar.gz</A>
(510 KB).
</DD>
<DD>
@ -164,14 +156,14 @@ cdrskin is part of libburn - full libburn is provided with cdrskin releases.
</DD>
<DD>&nbsp;</DD>
<DT>Download as single x86 binaries (untar and move to /usr/bin/cdrskin):</DT>
<DD><A HREF="cdrskin_0.2.4.pl01-x86-suse9_0.tar.gz">
cdrskin_0.2.4.pl01-x86-suse9_0.tar.gz</A>, (60 KB),
<DD><A HREF="cdrskin_0.2.6.pl01-x86-suse9_0.tar.gz">
cdrskin_0.2.6.pl01-x86-suse9_0.tar.gz</A>, (60 KB),
<DL>
<DD>runs on SuSE 9.0 (2.4.21) , RIP-14.4 (2.6.14) ,
Gentoo (2.6.15 x86_64 Athlon).</DD>
</DL>
<DD><A HREF="cdrskin_0.2.4.pl01-x86-suse9_0-static.tar.gz">
cdrskin_0.2.4.pl01-x86-suse9_0-static.tar.gz</A>, (260 KB), -static compiled,
<DD><A HREF="cdrskin_0.2.6.pl01-x86-suse9_0-static.tar.gz">
cdrskin_0.2.6.pl01-x86-suse9_0-static.tar.gz</A>, (260 KB), -static compiled,
<DL>
<DD>runs on SuSE 7.2 (2.4.4), and on the systems above.</DD>
</DL>
@ -195,22 +187,23 @@ cdrskin_0.2.4.pl01-x86-suse9_0-static.tar.gz</A>, (260 KB), -static compiled,
<HR>
<P>
Enhancements towards previous stable version cdrskin-0.2.2:
Enhancements towards previous stable version cdrskin-0.2.4:
<UL>
<LI>cdrecord compatibility with drive addresses of form [ATA:]Bus,Target,Lun.
<BR>(use option --old_pseudo_scsi_adr to get back the incompatible
Bus,Traget,Lun addressing of version 0.2.2)
<LI>Option <KBD><B>-tao</B></KBD> is fully enabled.<BR>
SAO is still the preferred default but TAO is default if a track of
unpredicted size is present (stdin, named pipe, ...) or if a follow-up
session is written to an appendable CD.
(This is an intentional deviation from cdrecord defaults which themselves
have changed with the newest cdrecord versions.)
</LI>
<LI>Drives adressable via links and device siblings (/dev/cdrom , /dev/scd0).
</LI>
<LI>Automatic -audio extraction with .wav files and .au files.
</LI>
<LI>Bug fix about failure to eject.</LI>
<LI>Comments and empty lines allowed in startup files.</LI>
<LI>Options -scanbus and --devices print SORRY messages about busy drives.
</LI>
<LI>Drive buffer fill indicator reports realistic percentage numbers.</LI>
<LI>Option -toc is supported, drive firmware revision gets displayed.</LI>
<LI>Status report during blank, preparation and finalization improved.</LI>
<LI>Bug fixed: Trailing trash appended to .wav files caused error message
and, if exceeding fifo size, could even stall a burn.
(Workaround: disable fifo by <KBD><B>fs=0</B></KBD>)</LI>
<LI>Bug fixed: False speed with first pacifier cycle. Potential program
abort by floating point exception (NaN).</LI>
<LI>multi-session CDs: <KBD><B>-multi</B></KBD>, <KBD><B>-msinfo</B></KBD>,
writing to appendable CDs (for now restricted to write mode TAO).</LI>
</UL>
</P>
@ -218,30 +211,14 @@ Enhancements towards previous stable version cdrskin-0.2.2:
<P>
<DL>
<DT><H3>Development snapshot, version 0.2.5 :</H3></DT>
<DD>Enhancements towards stable version 0.2.4:
<UL>
<LI>Option <KBD><B>-tao</B></KBD> is fully enabled.<BR>
SAO is still the preferred default but TAO is default if a track of
unpredicted size is present (stdin, named pipe, ...) or if a follow-up
session is written to an appendable CD.
(This is an intentional deviation from cdrecord defaults which themselves
have changed with the newest cdrecord versions.)
</LI>
<LI>Status report during blank, preparation and finalization improved.</LI>
<LI>Bug fixed: Trailing trash appended to .wav files caused error message
and, if exceeding fifo size, could even stall a burn.
(Workaround: disable fifo by <KBD><B>fs=0</B></KBD>)</LI>
<LI>Bug fixed: False speed with first pacifier cycle. Potential program
abort by floating point exception (NaN).</LI>
<LI>multi-session CDs: <KBD><B>-multi</B></KBD>, <KBD><B>-msinfo</B></KBD>,
writing to appendable CDs (for now restricted to write mode TAO).</LI>
</UL>
<DT><H3>Development snapshot, version 0.2.7 :</H3></DT>
<DD>Enhancements towards stable version 0.2.6:
(none yet)
</DD>
<DD>&nbsp;</DD>
<DD><A HREF="README_cdrskin_devel">README 0.2.5</A>
<DD><A HREF="cdrskin__help_devel">cdrskin_0.2.5 --help</A></DD>
<DD><A HREF="cdrskin_help_devel">cdrskin_0.2.5 -help</A></DD>
<DD><A HREF="README_cdrskin_devel">README 0.2.7</A>
<DD><A HREF="cdrskin__help_devel">cdrskin_0.2.7 --help</A></DD>
<DD><A HREF="cdrskin_help_devel">cdrskin_0.2.7 -help</A></DD>
<DD>&nbsp;</DD>
<DT>Maintainers of cdrskin unstable packages please use SVN of
<A HREF="http://libburn.pykix.org"> libburn.pykix.org</A></DT>
@ -261,15 +238,15 @@ admins with full system souvereignty.</DT>
<A HREF="README_cdrskin_devel">upcoming README</A> ):
</DD>
<DD>
<A HREF="cdrskin-0.2.5.tar.gz">cdrskin-0.2.5.tar.gz</A>
<A HREF="cdrskin-0.2.7.tar.gz">cdrskin-0.2.7.tar.gz</A>
(500 KB).
</DD>
<DD>Binary (untar and move to /usr/bin/cdrskin):</DD>
<DD><A HREF="cdrskin_0.2.5-x86-suse9_0.tar.gz">
cdrskin_0.2.5-x86-suse9_0.tar.gz</A>, (60 KB).
<DD><A HREF="cdrskin_0.2.7-x86-suse9_0.tar.gz">
cdrskin_0.2.7-x86-suse9_0.tar.gz</A>, (60 KB).
</DD>
<DD><A HREF="cdrskin_0.2.5-x86-suse9_0-static.tar.gz">
cdrskin_0.2.5-x86-suse9_0-static.tar.gz</A>, (260 KB)
<DD><A HREF="cdrskin_0.2.7-x86-suse9_0-static.tar.gz">
cdrskin_0.2.7-x86-suse9_0-static.tar.gz</A>, (260 KB)
</DD>
</DL>
</P>
@ -322,14 +299,6 @@ is a GUI frontend which uses cdrecord for CD burning.)
<DT>Example for a test session with a cdrecord based scdbackup installation:</DT>
<DD>$ <KBD><B>cdrskin -scanbus</B></KBD></DD>
<DD><KBD>...</KBD></DD>
</DL>
If your system is stricken with some ill CD device then this can stall
and you will have to press <KBD>Ctrl+C</KBD> to abort.
In this case, you may execute
<KBD>export SCDBACKUP_NO_SCANBUS=1</KBD>
and try again.
<DL>
<DT></DT>
<DD><KBD>&nbsp;&nbsp;&nbsp; 2,0,0 &nbsp;&nbsp; 0)&nbsp; 'TEAC' 'CD-ROM CD-532S' '?' Removable CD-ROM</KBD></DD>
<DD>$ <KBD><B>cdrskin -scanbus dev=ATA</B></KBD></DD>
<DD><KBD>...</KBD></DD>
@ -344,8 +313,15 @@ and try again.
<DD>$ <KBD><B>export SCDBACKUP_USE_CDRSKIN=1</B></KBD></DD>
<DD>$ <KBD><B>./CONFIGURE_CD</B></KBD></DD>
<DD><KBD>...</KBD></DD>
<DD><KBD>cdrskin 0.2.4 : limited cdrecord compatibility wrapper for libburn</KBD></DD>
<DD><KBD>...</KBD></DD>
<DD><KBD>cdrskin 0.2.6 : limited cdrecord compatibility wrapper for libburn</KBD></DD>
</DL>
If your system is stricken with some ill CD device then this can stall
and you will have to press <KBD>Ctrl+C</KBD> to abort.
In this case, you may execute
<KBD>export SCDBACKUP_NO_SCANBUS=1</KBD>
and try again.
<DL>
<DT></DT>
<DD><KBD> ------------------- SCSI devices. To be used like &nbsp;&nbsp; 0,0,0</KBD></DD>
<DD><KBD>&nbsp;&nbsp;&nbsp; 2,0,0 &nbsp;&nbsp; 0)&nbsp; 'TEAC' 'CD-ROM CD-532S' '?' Removable CD-ROM</KBD></DD>
<DD><KBD> ------------------- end of SCSI device list</KBD></DD>

Voir le fichier

@ -1 +1 @@
#define Cdrskin_timestamP "2006.11.22.122228"
#define Cdrskin_timestamP "2006.11.23.102340"

Voir le fichier

@ -7,7 +7,7 @@
debug_opts=
def_opts=
largefile_opts="-D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE=1"
libvers="-DCdrskin_libburn_0_2_3"
libvers="-DCdrskin_libburn_0_2_6"
cleanup_src_or_obj="libburn/cleanup.o"
libdax_msgs_o="libburn/libdax_msgs.o"
libdax_audioxtr_o="libburn/libdax_audioxtr.o"
@ -33,15 +33,15 @@ do
libdax_audioxtr_o=
libdax_msgs_o="libburn/message.o"
cleanup_src_or_obj="-DCleanup_has_no_libburn_os_H cdrskin/cleanup.c"
elif test "$i" = "-libburn_0_2_2"
elif test "$i" = "-libburn_0_2_6"
then
libvers="-DCdrskin_libburn_0_2_2"
libdax_audioxtr_o=
libdax_msgs_o="libburn/message.o"
cleanup_src_or_obj="-DCleanup_has_no_libburn_os_H cdrskin/cleanup.c"
elif test "$i" = "-libburn_0_2_3"
libvers="-DCdrskin_libburn_0_2_6"
libdax_audioxtr_o="libburn/libdax_audioxtr.o"
libdax_msgs_o="libburn/libdax_msgs.o"
cleanup_src_or_obj="libburn/cleanup.o"
elif test "$i" = "-libburn_svn"
then
libvers="-DCdrskin_libburn_0_2_3"
libvers="-DCdrskin_libburn_0_2_6"
libdax_audioxtr_o="libburn/libdax_audioxtr.o"
libdax_msgs_o="libburn/libdax_msgs.o"
cleanup_src_or_obj="libburn/cleanup.o"
@ -79,8 +79,8 @@ do
echo " -compile_cdrfifo compile program cdrskin/cdrfifo."
echo " -compile_dewav compile program test/dewav without libburn."
echo " -cvs_A60220 set macro to match libburn-CVS of 20 Feb 2006."
echo " -libburn_0_2_2 set macro to match libburn-0.2.2."
echo " -libburn_0_2_3 set macro to match current libburn-SVN."
echo " -libburn_0_2_6 set macro to match libburn-0.2.6."
echo " -libburn_svn set macro to match current libburn-SVN."
echo " -no_largefile do not use 64 bit off_t (must match libburn)."
echo " -do_not_compile_cdrskin omit compilation of cdrskin/cdrskin."
echo " -experimental use newly introduced libburn features."

Voir le fichier

@ -2,7 +2,7 @@
cdrskin Wiki - plain text copy
--------------------------------------------------------------------------
cdrskin-0.2.5 is the cdrecord compatibility middleware of libburn.
cdrskin is the cdrecord compatibility middleware of libburn.
Its paragon, cdrecord, is a powerful GPL'ed burn program included in Joerg
Schilling's cdrtools. cdrskin strives to be a second source for the services
@ -19,10 +19,9 @@ About libburn API for burning CD: http://libburn-api.pykix.org
--------------------------------------------------------------------------
Convenient TAO burn mode is provided in development version 0.2.5 but not in
current "stable" release 0.2.4. The same is true for multi-session, where
follow-up sessions must be done in TAO mode. (Users who have a burner which
succeeds with a follow-up session via cdrecord -sao : please contact us.)
Appending sessions to an unclosed CD is restricted to write mode TAO.
(Users who have a burner which succeeds with a follow-up session via
cdrecord -sao : please contact us.)
cdrskin does not provide DVD burning yet. See advise to use dvd+rw-tools
at the end of this text.
@ -135,8 +134,8 @@ tao_to_sao_tsize=<num> allows the - actually unsupported - cdrecord option
-tao and defines a default track size to be used if - as custom with -tao -
no option tsize=# is given.
Since -tao is supported in cdrskin-0.2.5 the TAO-to-SAO workaround on its way
to obsolescence. Nevertheless, tao_to_sao_tsize= allows to preset a default
Since -tao is supported in cdrskin-0.2.6 the TAO-to-SAO workaround has become
quite obsolete. Nevertheless, tao_to_sao_tsize= allows to preset a default
size for SAO mode which is in effect only if no track size is available.
As in general with cdrskin tsize=# the data source does not have to provide