New API function burn_text_to_sev()

This commit is contained in:
Thomas Schmitt 2007-10-16 21:22:29 +00:00
parent 191db530c5
commit e6885f7fac
3 changed files with 54 additions and 21 deletions

View File

@ -1 +1 @@
#define Cdrskin_timestamP "2007.10.15.144050"
#define Cdrskin_timestamP "2007.10.16.212205"

View File

@ -267,16 +267,32 @@ int burn_msgs_submit(int error_code, char msg_text[], int os_errno,
}
/* ts A71016 API */
int burn_text_to_sev(char *severity_name, int *sevno, int flag)
{
int ret;
ret = libdax_msgs__text_to_sev(severity_name, sevno, 0);
if (ret <= 0)
*sevno = LIBDAX_MSGS_SEV_FATAL;
return ret;
}
int burn_builtin_abort_handler(void *handle, int signum, int flag)
{
#define Libburn_new_thread_signal_handleR 1
/*
#define Libburn_signal_handler_verbouS 1
*/
int ret;
struct burn_drive *d;
/*
#ifdef Libburn_signal_handler_verbouS
fprintf(stderr, "libburn_ABORT: pid = %d , abort_control_pid = %d\n",
getpid(), abort_control_pid);
*/
#endif
/* ts A70928:
Must be quick. Allowed to coincide with other thread and to share
@ -293,9 +309,10 @@ int burn_builtin_abort_handler(void *handle, int signum, int flag)
ret = burn_drive_find_by_thread_pid(&d, getpid());
if (ret > 0 && d->busy == BURN_DRIVE_WRITING) {
/* This is an active writer thread */
/*
#ifdef Libburn_signal_handler_verbouS
fprintf(stderr, "libburn_ABORT: pid %d found drive busy with writing, (level= %d)\n", (int) getpid(), burn_global_abort_level);
*/
#endif
d->sync_cache(d);
@ -305,11 +322,16 @@ int burn_builtin_abort_handler(void *handle, int signum, int flag)
if (burn_global_abort_level > 0) {
/* control process did not show up yet */
/*
#ifdef Libburn_signal_handler_verbouS
fprintf(stderr, "libburn_ABORT: pid %d sending signum %d to pid %d\n", (int) getpid(), (int) signum, (int) abort_control_pid);
*/
#endif
kill(abort_control_pid, signum);
}
#ifdef Libburn_signal_handler_verbouS
fprintf(stderr, "libburn_ABORT: pid %d signum %d returning -2\n", (int) getpid(), (int) signum);
#endif
return -2;
} else {
usleep(1000000); /* calm down */

View File

@ -299,7 +299,7 @@ struct burn_toc_entry
/** Track start time frames for normal tracks */
unsigned char pframe;
/* Indicates wether extension data are valid and eventually override
/* Indicates whether extension data are valid and eventually override
older elements in this structure:
bit0= DVD extension is valid
*/
@ -882,7 +882,7 @@ int burn_drive_get_adr(struct burn_drive_info *drive_info, char adr[]);
/* ts A60922 ticket 33 */
/** Evaluate wether the given address would be a possible persistent drive
/** Evaluate whether the given address would be a possible persistent drive
address of libburn.
@return 1 means yes, 0 means no
*/
@ -1226,7 +1226,7 @@ void burn_disc_read(struct burn_drive *drive, const struct burn_read_opts *o);
/* ts A70219 */
/** Examines a completed setup for burn_disc_write() wether it is permissible
/** Examines a completed setup for burn_disc_write() whether it is permissible
with drive and media. This function is called by burn_disc_write() but
an application might be interested in this check in advance.
@param o The options for the writing operation.
@ -1262,7 +1262,7 @@ void burn_drive_cancel(struct burn_drive *drive);
/* ts A61223 */
/** Inquire wether the most recent write run was successful. Reasons for
/** Inquire whether the most recent write run was successful. Reasons for
non-success may be: rejection of burn parameters, abort during fatal errors
during write, a call to burn_drive_cancel() by the application thread.
@param d The drive to inquire.
@ -1379,7 +1379,7 @@ void burn_track_define_data(struct burn_track *t, int offset, int tail,
/* ts A61024 */
/** Define wether a track shall swap bytes of its input stream.
/** Define whether a track shall swap bytes of its input stream.
@param t The track to change
@param swap_source_bytes 0=do not swap, 1=swap byte pairs
@return 1=success , 0=unacceptable value
@ -1559,7 +1559,7 @@ void burn_drive_set_speed(struct burn_drive *d, int read, int write);
be full. To check and wait for enough free buffer space before writing
will move the task of waiting from the operating system's device driver
to libburn. While writing is going on and waiting is enabled, any write
operation will be checked wether it will fill the drive buffer up to
operation will be checked whether it will fill the drive buffer up to
more than max_percent. If so, then waiting will happen until the buffer
fill is predicted with at most min_percent.
Thus: if min_percent < max_percent then transfer rate will oscillate.
@ -1709,7 +1709,7 @@ void burn_write_opts_set_start_byte(struct burn_write_opts *opts, off_t value);
/** Caution: still immature and likely to change. Problems arose with
sequential DVD-RW on one drive.
Controls wether the whole available space of the media shall be filled up
Controls whether the whole available space of the media shall be filled up
by the last track of the last session.
@param opts The write opts to change
@param fill_up_media If 1 : fill up by last track, if 0 = do not fill up
@ -1720,8 +1720,8 @@ void burn_write_opts_set_fillup(struct burn_write_opts *opts,
/* ts A70303 */
/** Eventually makes libburn ignore the failure of some conformance checks:
- the check wether CD write+block type is supported by the drive
- the check wether the media profile supports simulated burning
- the check whether CD write+block type is supported by the drive
- the check whether the media profile supports simulated burning
@param opts The write opts to change
@param use_force 1=ignore above checks, 0=refuse work on failed check
*/
@ -1828,7 +1828,7 @@ int burn_drive_get_speedlist(struct burn_drive *d,
/** Look up the fastest speed descriptor which is not faster than the given
speed_goal. If it is 0, then the fastest one is chosen among the
descriptors with the highest end_lba. If it is -1 then the slowest speed
descriptor is chosen regardless of end_lba. Parameter flag decides wether
descriptor is chosen regardless of end_lba. Parameter flag decides whether
the speed goal means write speed or read speed.
@param d Drive to query
@param speed_goal Upper limit for speed,
@ -2017,8 +2017,8 @@ void burn_version(int *major, int *minor, int *micro);
/* ts A60924 : ticket 74 */
/** Control queueing and stderr printing of messages from libburn.
Severity may be one of "NEVER", "ABORT", "FATAL", "SORRY", "WARNING", "HINT",
"NOTE", "UPDATE", "DEBUG", "ALL".
Severity may be one of "NEVER", "ABORT", "FATAL", "SORRY", "WARNING",
"HINT", "NOTE", "UPDATE", "DEBUG", "ALL".
@param queue_severity Gives the minimum limit for messages to be queued.
Default: "NEVER". If you queue messages then you
must consume them by burn_msgs_obtain().
@ -2075,6 +2075,17 @@ int burn_msgs_submit(int error_code, char msg_text[], int os_errno,
char severity[], struct burn_drive *d);
/* ts A71016 */
/** Convert a severity name into a severity number, which gives the severity
rank of the name.
@param severity_name A name as with burn_msgs_submit(), e.g. "SORRY".
@param severity_number The rank number: the higher, the more severe.
@param flag Bitfield for control purposes (unused yet, submit 0)
@return >0 success, <=0 failure
*/
int burn_text_to_sev(char *severity_name, int *severity_number, int flag);
/* ts A70915 */
/** Replace the messenger object handle of libburn by a compatible handle
obtained from a related library.
@ -2166,7 +2177,7 @@ int burn_read_data(struct burn_drive *d, off_t byte_address,
/* A70904 */
/** Inquire wether the drive object is a real MMC drive or a pseudo-drive
/** Inquire whether the drive object is a real MMC drive or a pseudo-drive
created by burn_drive_dummy().
@param d The drive to inquire
@return 0= null-drive
@ -2178,7 +2189,7 @@ int burn_drive_get_drive_role(struct burn_drive *d);
/* ts A70923 */
/** Find out wether a given address string would lead to the given drive
/** Find out whether a given address string would lead to the given drive
object. This should be done in advance for track source addresses
with parameter drive_role set to 2.
Although a real MMC drive should hardly exist as two drive objects at