Documented changes and release timestamp

Makefile.am

@@ -101,9 +101,9 @@ test_structest_CPPFLAGS = -Ilibburn
 test_structest_LDADD = $(libburn_libburn_la_OBJECTS) $(THREAD_LIBS)
 test_structest_SOURCES = test/structest.c
 
-##  cdrskin construction site - ts A60816 - A80510
+##  cdrskin construction site - ts A60816 - A80716
 cdrskin_cdrskin_CPPFLAGS = -Ilibburn
-cdrskin_cdrskin_CFLAGS = -DCdrskin_libburn_0_4_7
+cdrskin_cdrskin_CFLAGS = -DCdrskin_libburn_0_5_0
 
 # cdrskin_cdrskin_LDADD = $(libburn_libburn_la_OBJECTS) $(THREAD_LIBS)
 # ts A80123, change proposed by Simon Huggins to cause dynamic libburn linking

README

@@ -284,6 +284,22 @@ Project history as far as known to me:
   full nominal speed for DVD-RAM and BD-RE. cdrskin has a unified blank
   type with automatic media state recognition.
 
+- 17th May 2008 an old bug with DVD-RAM and now with BD-RE is fixed by
+  libburn-0.4.8 to allow libisoburn emulation of multisession on those media.
+
+- 19th May 2008 libisoburn-0.1.6 brings better table-of-content emulation
+  on overwriteble media and disk files.
+
+- 1st Jun 2008 libisofs-0.6.6 fixes some problems around device files.
+
+- 3rd Jun 2008 libisoburn-0.1.8 fixes a bug with overwriteable media.
+
+- 23rd Jun 2008 libisoburn-0.2.0 introduces extraction of files from
+  ISO images.
+
+- 16th Jul 2008 libburn-0.5.0 handles systems with no /dev/sr* but only
+  /dev/scd*.
+
 
 ------------------------------------------------------------------------------
 

cdrskin/README

@@ -4,7 +4,7 @@
 cdrskin. By Thomas Schmitt <scdbackup@gmx.net>
 Integrated sub project of libburnia-project.org but also published via:
 http://scdbackup.sourceforge.net/cdrskin_eng.html
-http://scdbackup.sourceforge.net/cdrskin-0.4.7.tar.gz
+http://scdbackup.sourceforge.net/cdrskin-0.5.0.pl00.tar.gz
 Copyright (C) 2006-2008 Thomas Schmitt, provided under GPL version 2.
 ------------------------------------------------------------------------------
 
@@ -20,10 +20,10 @@ By using this software you agree to the disclaimer at the end of this text
 
                    Compilation, First Glimpse, Installation
 
-Obtain cdrskin-0.4.7.tar.gz, take it to a directory of your choice and do:
+Obtain cdrskin-0.5.0.pl00.tar.gz, take it to a directory of your choice and do:
 
-    tar xzf cdrskin-0.4.7.tar.gz
+    tar xzf cdrskin-0.5.0.pl00.tar.gz
-    cd cdrskin-0.4.7
+    cd cdrskin-0.5.0
 
 Within that directory execute:
 
@@ -139,8 +139,8 @@ Obtain some info about the drive
 Obtain some info about the drive and the inserted media
     cdrskin dev=0,1,0 -atip -v
 
-Make used CD-RW or used unformatted DVD-RW writeable again
+Prepare CD-RW or DVD-RW for re-use, DVD-RAM or BD-RE for first use
-    cdrskin -v dev=0,1,0 blank=fast -eject 
+    cdrskin -v dev=/dev/sg1 blank=as_needed -eject
 
 Format DVD-RW to avoid need for blanking before re-use
     cdrskin -v dev=0,1,0 blank=format_overwrite
@@ -154,16 +154,16 @@ Burn image file  my_image.iso  to media
 
 Write multi-session to the same CD , DVD-R[W] or DVD+R[/DL]
     cdrskin dev=/dev/hdc padsize=300k -multi 1.iso
-    cdrskin dev=/dev/hdc padsize=300k -multi -tao 2.iso
+    cdrskin dev=/dev/hdc padsize=300k -multi 2.iso
-    cdrskin dev=/dev/hdc padsize=300k -multi -tao 3.iso
+    cdrskin dev=/dev/hdc padsize=300k -multi 3.iso
-    cdrskin dev=/dev/hdc padsize=300k -tao 4.iso
+    cdrskin dev=/dev/hdc padsize=300k 4.iso
 
 Get multi-session info for option -C of program mkisofs:
     c_values=$(cdrskin dev=/dev/hdc -msinfo 2>/dev/null)
     mkisofs ... -C "$c_values" ...
 
 Burn a compressed afio archive to media on-the-fly
-    find . | afio -oZ - | cdrskin -v dev=0,1,0 fs=32m speed=8 -tao \
+    find . | afio -oZ - | cdrskin -v dev=0,1,0 fs=32m speed=8 \
                                   driveropts=burnfree padsize=300k - 
 
 Burn 6 audio tracks from files with different formats to CD (not to any DVD).
@@ -186,8 +186,6 @@ See output of command
     cdrskin --list_ignored_options
 If you have use cases for them, please report your wishes and expectations.
 
-DVD support is restricted to single layer DVD for now. Double layer media
-are implemented but untested.
 On the other hand, the capability of multi-session and of writing streams
 of unpredicted lenght surpass the current DVD capabilities of cdrecord.
 
@@ -356,7 +354,7 @@ blank=deformat_sequential_quickest   is faster but might yield DAO-only media.
 From the view of cdrskin they behave much like DVD-R. Each track gets wrapped
 into an own session, though.
 DVD+R DL appear as extra large DVD+R. cdrskin does not allow to set the address
-of the layer break where ia reading drive might show some delay while switching
+of the layer break where a reading drive might show some delay while switching
 between both media layers.
 
 
@@ -407,9 +405,9 @@ Don't blame me or other authors of libburn if anything goes wrong.
 Actually, in case of severe trouble, nearly always the drive and the media
 are the cause. Any mistake of the burn program is supposed to be caught
 by the drive's firmware and to lead to mere misburns.
-The worst mishaps which hit the author implied the need to reboot the
+The worst mishaps which hit the author imposed the need to reboot the
 system because of drives gnawing endlessly on ill media. Permanent hardware
-damage did not occur in 2.5 years of development.
+damage did not occur in 2.5 years of development. But one never knows ...
 
 ------------------------------------------------------------------------------
 

cdrskin/add_ts_changes_to_libburn_0_5_0

@@ -38,7 +38,7 @@ original="./libburn_svn_release.tgz"
 # My changes are in $changes , mainly in $changes/cdrskin
 changes="./libburn-release"
 
-skin_release="0.4.6"
+skin_release="0.5.0"
 patch_level=".pl00"
 skin_rev="$skin_release""$patch_level"
 

cdrskin/add_ts_changes_to_libburn_0_5_1

@@ -38,7 +38,7 @@ original="./libburn_svn.tgz"
 # My changes are in $changes , mainly in $changes/cdrskin
 changes="./libburn-develop"
 
-skin_release="0.4.7"
+skin_release="0.5.1"
 patch_level=""
 skin_rev="$skin_release""$patch_level"
 
@@ -239,7 +239,7 @@ rm -rf "$target"
 ./"$bintarget_dynamic" -version
 ./"$bintarget_static" -version
 ls -l "$cdrskin_tarball"
-ls -l "$bintarget_dynamic"*
+ls -l "$bintarget_dynamic"
 ls -l "$bintarget_static"
 ls -l $(basename "$man_page_html")
 

cdrskin/cdrskin.1

@@ -2,7 +2,7 @@
 .\" First parameter, NAME, should be all caps
 .\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
 .\" other parameters are allowed: see man(7), man(1)
-.TH CDRSKIN 1 "May 10, 2008"
+.TH CDRSKIN 1 "May 17, 2008"
 .\" Please adjust this date whenever revising the manpage.
 .\"
 .\" Some roff macros, for reference:
@@ -1229,13 +1229,13 @@ blank=as_needed padsize=300k -
 .SS
 .B Write multi-session to the same CD, DVD-R[W] or DVD+R[/DL]:
 .br
-cdrskin dev=/dev/hdc -v padsize=300k -multi -tao 1.iso
+cdrskin dev=/dev/hdc -v padsize=300k -multi 1.iso
 .br
-cdrskin dev=/dev/hdc -v padsize=300k -multi -tao 2.iso
+cdrskin dev=/dev/hdc -v padsize=300k -multi 2.iso
 .br
-cdrskin dev=/dev/hdc -v padsize=300k -multi -tao 3.iso
+cdrskin dev=/dev/hdc -v padsize=300k -multi 3.iso
 .br
-cdrskin dev=/dev/hdc -v padsize=300k -tao 4.iso
+cdrskin dev=/dev/hdc -v padsize=300k 4.iso
 .SS
 .B Get multi-session info for option -C of program mkisofs:
 .br
@@ -1243,9 +1243,9 @@ c_values=$(cdrskin dev=/dev/hdc -msinfo 2>/dev/null)
 .br
 mkisofs ... -C "$c_values" ...
 .SS
-.B Inquire free space on media for a -tao -multi run:
+.B Inquire free space on media for a -multi run:
 .br
-x=$(cdrskin dev=/dev/sr0 -tao -multi \\
+x=$(cdrskin dev=/dev/sr0 -multi \\
 .br
 --tell_media_space 2>/dev/null)
 .br

cdrskin/cdrskin.c

@@ -88,7 +88,7 @@ or
 
 /** The official program version */
 #ifndef Cdrskin_prog_versioN
-#define Cdrskin_prog_versioN "0.4.7"
+#define Cdrskin_prog_versioN "0.5.0"
 #endif
 
 /** The official libburn interface revision to use.
@@ -98,10 +98,10 @@ or
 #define Cdrskin_libburn_majoR 0
 #endif
 #ifndef Cdrskin_libburn_minoR
-#define Cdrskin_libburn_minoR 4
+#define Cdrskin_libburn_minoR 5
 #endif
 #ifndef Cdrskin_libburn_micrO
-#define Cdrskin_libburn_micrO 7
+#define Cdrskin_libburn_micrO 0
 #endif
 
 
@@ -135,44 +135,44 @@ or
 #endif /* Cdrskin_libburn_cvs_A60220_tS */
 
 
-#ifdef Cdrskin_libburn_0_4_6
+#ifdef Cdrskin_libburn_0_5_0
-#define Cdrskin_libburn_versioN "0.4.6"
+#define Cdrskin_libburn_versioN "0.5.0"
 #define Cdrskin_libburn_from_pykix_svN 1
-#endif /* Cdrskin_libburn_0_4_6 */
+#endif /* Cdrskin_libburn_0_5_0 */
 
-#ifdef Cdrskin_libburn_0_4_7
+#ifdef Cdrskin_libburn_0_5_1
-#define Cdrskin_libburn_versioN "0.4.7"
+#define Cdrskin_libburn_versioN "0.5.1"
 #define Cdrskin_libburn_from_pykix_svN 1
 
 /* Place novelty switch macros here. 
    Move them down to Cdrskin_libburn_from_pykix_svN on version leap
 */
 
-/* there are no libburn novelties in 0.4.7 yet */
+/* there are no libburn novelties in 0.5.1 yet */
 
-#endif /* Cdrskin_libburn_0_4_7 */
+#endif /* Cdrskin_libburn_0_5_1 */
 
 #ifndef Cdrskin_libburn_versioN
-#define Cdrskin_libburn_0_4_6
+#define Cdrskin_libburn_0_5_0
-#define Cdrskin_libburn_versioN "0.4.6"
+#define Cdrskin_libburn_versioN "0.5.0"
 #define Cdrskin_libburn_from_pykix_svN 1
 #endif
 
-#ifdef Cdrskin_libburn_0_4_6
+#ifdef Cdrskin_libburn_0_5_0
 #undef Cdrskin_libburn_majoR
 #undef Cdrskin_libburn_minoR
 #undef Cdrskin_libburn_micrO
 #define Cdrskin_libburn_majoR 0
-#define Cdrskin_libburn_minoR 4
+#define Cdrskin_libburn_minoR 5
-#define Cdrskin_libburn_micrO 6
+#define Cdrskin_libburn_micrO 0
 #endif
-#ifdef Cdrskin_libburn_0_4_7
+#ifdef Cdrskin_libburn_0_5_1
 #undef Cdrskin_libburn_majoR
 #undef Cdrskin_libburn_minoR
 #undef Cdrskin_libburn_micrO
 #define Cdrskin_libburn_majoR 0
-#define Cdrskin_libburn_minoR 4
+#define Cdrskin_libburn_minoR 5
-#define Cdrskin_libburn_micrO 7
+#define Cdrskin_libburn_micrO 1
 #endif
 
 
@@ -248,6 +248,12 @@ or
 /* 0.4.6 */
 #define Cdrskin_libburn_has_stream_recordinG 1
 
+/* 0.4.8 */
+/* Bug fix release for  write_start_address=... on DVD-RAM and BD-RE */
+
+/* 0.5.0 */
+/* novel libburn features are transparent to cdrskin */
+
 
 #ifdef Cdrskin_new_api_tesT
 
@@ -8026,11 +8032,15 @@ int Cdrskin_create(struct CdrskiN **o, struct CdrpreskiN **preskin,
  printf("cdrskin: scanning for devices ...\n");
  fflush(stdout);
 
+#ifdef Cdrskin_libburn_has_burn_msgS
+ if(skin->preskin->verbosity<Cdrskin_verbose_debuG)
+   burn_msgs_set_severities("NEVER", "NOTE", "cdrskin: ");
+#endif
+
  /* In cdrskin there is not much sense in queueing library messages.
     It is done here only for testing it from time to time */
  Cdrpreskin_queue_msgs(skin->preskin,1);
 
-
 #ifndef Cdrskin_oldfashioned_api_usE
  if(stdio_drive) {
    ret= burn_drive_scan_and_grab(&(skin->drives),skin->preskin->device_adr,0);
@@ -8051,6 +8061,11 @@ int Cdrskin_create(struct CdrskiN **o, struct CdrpreskiN **preskin,
    }
  }
 
+#ifdef Cdrskin_libburn_has_burn_msgS
+ burn_msgs_set_severities(skin->preskin->queue_severity,
+                          skin->preskin->print_severity, "cdrskin: ");
+#endif
+
  /* This prints the eventual queued messages */
  Cdrpreskin_queue_msgs(skin->preskin,0);
 

cdrskin/cdrskin_eng.html

@@ -57,10 +57,10 @@ and to MMC-5 for DVD or BD).
 GPL software included:<BR>
 </H2>
 <DL>
-<DT>libburn-0.4.6</DT>
+<DT>libburn-0.5.0</DT>
 <DD>(founded by Derek Foreman and Ben Jansens,
-furthered by team of libburnia-project.org)</DD>
+furthered since August 2006 by Thomas Schmitt from team of libburnia-project.org)</DD>
-<DD>transfers data to CD and DVD</DD>
+<DD>transfers data to CD, DVD, BD-RE</DD>
 </DL>
 </P>
 
@@ -87,8 +87,8 @@ Ports to other usable systems are appreciated. Reports are welcome.
 are provided in a compatible way.<BR>
 On all DVD media except DVD-R DL, cdrskin is able to perform any recording job
 which is possible with cdrecord.
-Other than with cdrecord, options -multi and -tao are supported with
+Other than with cdrecord, option -multi is supported with many DVD types and
-most DVD types and with BD-RE.
+write mode -tao works with anything but quickly blanked DVD-RW.
 </DT>
 <BR><BR>
 <DT>Get an overview of drives and their addresses</DT>
@@ -126,20 +126,20 @@ as listed by option --devices.</DT>
 <DD><KBD>&nbsp;&nbsp;blank=as_needed padsize=300k -</KBD></DD>
 
 <DT>Write several sessions to the same CD, DVD-R[W] or DVD+R[/DL]:</DT>
-<DD>$<KBD>&nbsp;cdrskin dev=/dev/hdc -v padsize=300k -multi -tao 1.iso</KBD>
+<DD>$<KBD>&nbsp;cdrskin dev=/dev/hdc -v padsize=300k -multi 1.iso</KBD>
 </DD>
-<DD>$<KBD>&nbsp;cdrskin dev=/dev/hdc -v padsize=300k -multi -tao 2.iso</KBD>
+<DD>$<KBD>&nbsp;cdrskin dev=/dev/hdc -v padsize=300k -multi 2.iso</KBD>
 </DD>
-<DD>$<KBD>&nbsp;cdrskin dev=/dev/hdc -v padsize=300k -multi -tao 3.iso</KBD>
+<DD>$<KBD>&nbsp;cdrskin dev=/dev/hdc -v padsize=300k -multi 3.iso</KBD>
 </DD>
-<DD>$<KBD>&nbsp;cdrskin dev=/dev/hdc -v padsize=300k -tao 4.iso</KBD></DD>
+<DD>$<KBD>&nbsp;cdrskin dev=/dev/hdc -v padsize=300k 4.iso</KBD></DD>
 
 <DT>Get multi-session info for option -C of program mkisofs:</DT>
 <DD>$<KBD>&nbsp;c_values=$(cdrskin dev=/dev/sr0 -msinfo 2>/dev/null)</KBD></DD>
 <DD>$<KBD>&nbsp;mkisofs ... -C "$c_values" ...</KBD></DD>
 
-<DT>Inquire free space on media for a -tao -multi run:</DT>
+<DT>Inquire free space on media for a -multi run:</DT>
-<DD>$<KBD>&nbsp;x=$(cdrskin dev=/dev/sr0 -tao -multi \</KBD></DD>
+<DD>$<KBD>&nbsp;x=$(cdrskin dev=/dev/sr0 -multi \</KBD></DD>
 <DD><KBD>&nbsp;&nbsp;--tell_media_space 2>/dev/null)</KBD></DD>
 <DD>$<KBD>&nbsp;echo "Available: $x blocks of 2048 data bytes"</KBD></DD>
 
@@ -186,7 +186,7 @@ or to do experiments on BD-R media.
 <P>
 <DL>
 <DT>Download as source code (see README):</DT>
-<DD><A HREF="cdrskin-0.4.6.pl00.tar.gz">cdrskin-0.4.6.pl00.tar.gz</A>
+<DD><A HREF="cdrskin-0.5.0.pl00.tar.gz">cdrskin-0.5.0.pl00.tar.gz</A>
 (730 KB).
 </DD>
 <DD>
@@ -236,22 +236,18 @@ cdrskin_0.4.2.pl00-x86-suse9_0-static.tar.gz</A>, (310 KB), -static compiled,
 <HR>
 
 <P>
-Enhancements towards previous stable version cdrskin-0.4.4.pl00:
+Enhancements towards previous stable version cdrskin-0.4.8.pl00:
 <UL>
-<LI>Support for BD-RE media is now official</LI>
+<LI>Ability to use /dev/scdN as fallback if /dev/srN does not exist</LI>
-<LI>New option stream_recording=on can speed up DVD-RAM and BD-RE</LI>
+<!--
-<LI>New option --list_formats</LI>
+<LI>none</LI>
-<LI>New blank types for expert formatting of DVD-RAM and BD-RE</LI>
+-->
-<LI>New blank type blank=as_needed for automatic handling
-of media type and state</LI>
 </UL>
 
-<!--
+Bug fixes towards cdrskin-0.4.8.pl00:
- Bug fixes towards cdrskin-0.4.4.pl00:
 <UL>
-<LI>none yet</LI>
+<LI>Option drive_scsi_dev_family=scd lead to buffer overflow</LI>
 </UL>
--->
 
 </P>
 
@@ -259,8 +255,8 @@ of media type and state</LI>
 
 <P>
 <DL>
-<DT><H3>Development snapshot, version 0.4.7 :</H3></DT>
+<DT><H3>Development snapshot, version 0.5.1 :</H3></DT>
-<DD>Enhancements towards current stable version 0.4.6.pl00:
+<DD>Enhancements towards current stable version 0.5.0.pl00:
 <UL>
 <!--
 -->
@@ -269,10 +265,10 @@ of media type and state</LI>
 </UL>
 </DD>
 <DD>&nbsp;</DD>
-<DD><A HREF="README_cdrskin_devel">README 0.4.7</A>
+<DD><A HREF="README_cdrskin_devel">README 0.5.1</A>
-<DD><A HREF="cdrskin__help_devel">cdrskin_0.4.7 --help</A></DD>
+<DD><A HREF="cdrskin__help_devel">cdrskin_0.5.1 --help</A></DD>
-<DD><A HREF="cdrskin_help_devel">cdrskin_0.4.7 -help</A></DD>
+<DD><A HREF="cdrskin_help_devel">cdrskin_0.5.1 -help</A></DD>
-<DD><A HREF="man_1_cdrskin_devel.html">man cdrskin (as of 0.4.7)</A></DD>
+<DD><A HREF="man_1_cdrskin_devel.html">man cdrskin (as of 0.5.1)</A></DD>
 <DD>&nbsp;</DD>
 <DT>Maintainers of cdrskin unstable packages please use SVN of
 <A HREF="http://libburnia-project.org"> libburnia-project.org</A></DT>
@@ -292,7 +288,7 @@ admins with full system souvereignty.</DT>
 <A HREF="README_cdrskin_devel">upcoming README</A> ):
 </DD>
 <DD>
-<A HREF="cdrskin-0.4.7.tar.gz">cdrskin-0.4.7.tar.gz</A>
+<A HREF="cdrskin-0.5.1.tar.gz">cdrskin-0.5.1.tar.gz</A>
 (730 KB).
 </DD>
 
@@ -334,14 +330,33 @@ provide libburn with invaluable examples on how to deal with DVD media.
 <A NAME="examples">
 <P>
 <DL>
-<DT>Example for a setup of device permissions. To be done by the superuser:</DT>
+<DT>Example for a setup of device permissions.</DT>
-<DT>(CD devices which offer no rw-permission are invisible to normal users.)
+<DT>
+Newer Linux distros enable rw-access for the desktop user automatically.
+So try as normal user whether all your drives are found.
+CD devices which offer no rw-permission will stay invisible.
+</DT>
+<DD>$ <KBD><B>cdrskin --devices</B></KBD></DD>
+<DT>If not all desired drives show up, become superuser and do again:</DT>
 </DT>
 <DD># <KBD><B>cdrskin --devices</B></KBD></DD>
 <DD><KBD>...</KBD></DD>
-<DD><KBD>0&nbsp; dev='/dev/sr0'&nbsp; rwrwr- :&nbsp; 'TEAC'  'CD-ROM CD-532S'</KBD></DD>
+<DD><KBD>0&nbsp; dev='/dev/sr0'&nbsp; rwr-r- :&nbsp; 'TEAC'  'CD-ROM CD-532S'</KBD></DD>
 <DD><KBD>1&nbsp; dev='/dev/hdc'&nbsp; rwrw-- :&nbsp; 'LITE-ON'  'LTR-48125S'</KBD></DD>
+<DT>Most simple and most insecure is this equivalent
+of the usual cdrecord permissions u+s,a+x:</DT>
 <DD># <KBD><B>chmod a+rw /dev/sr0 /dev/hdc</B></KBD></DD>
+<DT>
+More secure is to put the permitted users into a group like
+"floppy", to assign /dev/sr0 /dev/hdc to this group,
+and to allow rw-access only to group members.
+</DT>
+<DD># <KBD><B>vi /etc/group</B></KBD></DD>
+<DD><KBD>...</KBD></DD>
+<DD><KBD>floppy:x:19:thomas,scdbackup</KBD></DD>
+<DD><KBD>...</KBD></DD>
+<DD># <KBD><B>chgrp floppy /dev/sr0 /dev/hdc</B></KBD></DD>
+<DD># <KBD><B>chmod g+rw /dev/sr0 /dev/hdc</B></KBD></DD>
 </DL>
 </P>
 
@@ -426,7 +441,7 @@ cdrecord but not vice versa.
 I am a long time user of cdrecord and it works fine for me. 
 Especially i do appreciate its write mode -tao which allows to pipe arbitrary
 data on CD and CD-RW via stdin. cdrecord is reliable, versatile and well
-maintained. So for me - there would be not problem with it.
+maintained. So for me - there would be no problem with it.
 <BR>
 But the author of cdrecord and the Linux kernel people foster a very hostile 
 relationship. Ok, that's their business, not mine (or ours if you are with me).

cdrskin/cdrskin_timestamp.h

@@ -1 +1 @@
-#define Cdrskin_timestamP "2008.05.14.165258"
+#define Cdrskin_timestamP "2008.07.16.070001"

cdrskin/changelog.txt

@@ -5447,7 +5447,7 @@ Changed blank examples to blank=as_needed
 Makefile.am
 configure.ac
 README
-libburn/libburn.h (burn_header_version_*)
+libburn/libburn.h
 cdrskin/cdrskin.c 
 cdrskin/README
 cdrskin/compile_cdrskin.sh
@@ -5504,15 +5504,157 @@ Made number transition to 0.4.7
 + cdrskin/add_ts_changes_to_libburn_0_4_7
 Updated cdrskin tarball generator
 
-10 May 2008  []
+10 May 2008  [1760]
 cdrskin/changelog.txt
 Documented changes and release timestamp
 
 ------------------------------------ cycle  - cdrskin-0.4.7 - 2008.05.10.132543
 
+2008.05.14.165025  [1776]
+libburn/write.c
+Bug fix: random access addressing for DVD-RAM and BD-RE did not work
 
------------------------------------- cycle  - cdrskin-0.4.7 - 
+2008.05.14.165157  [1777]
------------------------------------- cycle  - cdrskin-0.4.7 - 
+libburn/libburn.h
+Added format types 0x30 and 0x32 to list in API comments
+
+2008.05.14.165258  [1778]
+cdrskin/cdrskin.c
+Made inability to get format list a reason to abort the program
+
+------------------------------------ cycle  - cdrskin-0.4.7 - 2008.05.14.165258
+* Bug fix: random access addressing for DVD-RAM and BD-RE did not work
+
+
+2008.05.17.080001  [1788] 
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c 
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+cdrskin/cdrskin.1
+Made number transition to 0.4.8 and activated development documentation
+
+17 May 2008  [1789]
+- cdrskin/add_ts_changes_to_libburn_0_4_6
+- cdrskin/add_ts_changes_to_libburn_0_4_7
++ cdrskin/add_ts_changes_to_libburn_0_4_8
++ cdrskin/add_ts_changes_to_libburn_0_4_9
+Updated cdrskin tarball generator
+
+17 May 2008  [1792]
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+----------------------------- release  - cdrskin-0.4.8.pl00 - 2008.05.17.080001
+* Bug fix: random access addressing for DVD-RAM and BD-RE did not work
+
+
+2008.05.17.115434  [1790]
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c 
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+cdrskin/cdrskin.1
+Made number transition to 0.4.9
+
+17 May 2008  [1791]
+- cdrskin/add_ts_changes_to_libburn_0_4_6
+- cdrskin/add_ts_changes_to_libburn_0_4_7
++ cdrskin/add_ts_changes_to_libburn_0_4_8
++ cdrskin/add_ts_changes_to_libburn_0_4_9
+Updated cdrskin tarball generator
+
+17 May 2008  [1793]
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+------------------------------------ cycle  - cdrskin-0.4.9 - 2008.05.17.121250
+
+14 Jun 2008  [1852]
+README
+Updated release history
+
+2008.06.14.140711  [1853]
+libburn/libburn.h
+Inserted @since tags for all functions older than 0.2.0
+
+2008.07.02.093933  [1882]
+libburn/sg-linux.c
+With auto device family: scd is now fallback if sr does not exist
+
+------------------------------------ cycle  - cdrskin-0.4.9 - 2008.07.12.164045
+* Ability to use /dev/scd as fallback if /dev/sr does not exist
+* Bug fix: option drive_scsi_dev_family=scd lead to buffer overflow
+
+
+2008.07.14.112935  [1914]
+libburn/sg-linux.c
+libburn/libdax_msgs.h
+Trying to avoid SORRY messages when hitting busy hard disk /dev/hdX
+
+2008.07.14.113050  [1915]
+cdrskin/cdrskin.c
+Making visible the new NOTE and HINT about busy alleged hard disks
+
+2008.07.14.113152  [1916]
+configure.ac
+Did LT_CURRENT++, LT_AGE++ because of new API call
+
+2008.07.14.113903  [1917]
+libburn/libburn.h
+libburn/file.c
+libburn/async.c
+New API call burn_fifo_peek_data()
+
+2008.07.14.164528  [1922]
+libburn/sg-linux.c
+Followed hint of Giulio Orsero to recognize disk by /proc/ide/hdX/media
+
+------------------------------------ cycle  - cdrskin-0.4.9 - 2008.07.14.164906
+* New API call burn_fifo_peek_data()
+
+2008.07.16.070001  [1927]
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+Made number transition to 0.5.0 and activated development documentation
+
+16 Jul 2008  [1928]
+- cdrskin/add_ts_changes_to_libburn_0_4_8
+- cdrskin/add_ts_changes_to_libburn_0_4_9
++ cdrskin/add_ts_changes_to_libburn_0_5_0
++ cdrskin/add_ts_changes_to_libburn_0_5_1
+Updated cdrskin tarball generator
+
+16 Jul 2008  []
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+------------------------------------ cycle  - cdrskin-0.5.0 - 2008.07.16.070001
+* Ability to use /dev/scd as fallback if /dev/sr does not exist
+* Bug fix: option drive_scsi_dev_family=scd lead to buffer overflow
+* New API call burn_fifo_peek_data()
+
+
+
+------------------------------------ cycle  - cdrskin-0.5.1 - 
+------------------------------------ cycle  - cdrskin-0.5.1 - 
 
 ===============================================================================
                                     TODO
@@ -5534,7 +5676,9 @@ READ TRACK INFORMATION[#5]:
 
 ------------------------------ end of bugs ---------------------------------
 
-@since tags
+Overhaul libburn drive scan and single drive opening
+
+Provide DVD+R DL layer break setter
 
 Check all SORRY and FATAL errors whether they should become FAILUREs
 

cdrskin/compile_cdrskin.sh

@@ -7,7 +7,7 @@
 debug_opts="-O2"
 def_opts=
 largefile_opts="-D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE=1"
-libvers="-DCdrskin_libburn_0_4_7"
+libvers="-DCdrskin_libburn_0_5_0"
 cleanup_src_or_obj="libburn/cleanup.o"
 libdax_msgs_o="libburn/libdax_msgs.o"
 libdax_audioxtr_o="libburn/libdax_audioxtr.o"
@@ -33,15 +33,15 @@ do
     libdax_audioxtr_o=
     libdax_msgs_o="libburn/message.o"
     cleanup_src_or_obj="-DCleanup_has_no_libburn_os_H cdrskin/cleanup.c"
-  elif test "$i" = "-libburn_0_4_6"
+  elif test "$i" = "-libburn_0_5_0"
   then
-    libvers="-DCdrskin_libburn_0_4_6"
+    libvers="-DCdrskin_libburn_0_5_0"
     libdax_audioxtr_o="libburn/libdax_audioxtr.o"
     libdax_msgs_o="libburn/libdax_msgs.o"
     cleanup_src_or_obj="libburn/cleanup.o"
   elif test "$i" = "-libburn_svn"
   then
-    libvers="-DCdrskin_libburn_0_4_7"
+    libvers="-DCdrskin_libburn_0_5_1"
     libdax_audioxtr_o="libburn/libdax_audioxtr.o"
     libdax_msgs_o="libburn/libdax_msgs.o"
     cleanup_src_or_obj="libburn/cleanup.o"
@@ -76,7 +76,7 @@ do
     echo "  -compile_cdrfifo  compile program cdrskin/cdrfifo."
     echo "  -compile_dewav    compile program test/dewav without libburn."
     echo "  -cvs_A60220       set macro to match libburn-CVS of 20 Feb 2006."
-    echo "  -libburn_0_4_6    set macro to match libburn-0.4.6."
+    echo "  -libburn_0_5_0    set macro to match libburn-0.5.0"
     echo "  -libburn_svn      set macro to match current libburn-SVN."
     echo "  -no_largefile     do not use 64 bit off_t (must match libburn)."
     echo "  -do_not_compile_cdrskin  omit compilation of cdrskin/cdrskin."

configure.ac

@@ -1,4 +1,4 @@
-AC_INIT([libburn], [0.4.7], [http://libburnia-project.org])
+AC_INIT([libburn], [0.5.0], [http://libburnia-project.org])
 AC_PREREQ([2.50])
 dnl AC_CONFIG_HEADER([config.h])	
 
@@ -61,6 +61,8 @@ dnl Neatly versioned stable releases meanwhile:
 dnl    0.4.2 = libburn.so.4.7.0
 dnl    0.4.4 = libburn.so.4.9.0
 dnl    0.4.6 = libburn.so.4.11.0
+dnl    0.4.8 = libburn.so.4.13.0
+dnl    0.5.0 = libburn.so.4.15.0
 dnl
 dnl So LT_CURRENT, LT_REVISION and LT_AGE get set directly here.
 dnl SONAME of the emerging library is  LT_CURRENT - LT_AGE.
@@ -85,8 +87,8 @@ dnl If BURN_*_VERSION changes, be sure to change AC_INIT above to match.
 dnl
 dnl As said: Only copies. Original in libburn/libburn.h : burn_header_version_*
 BURN_MAJOR_VERSION=0
-BURN_MINOR_VERSION=4
+BURN_MINOR_VERSION=5
-BURN_MICRO_VERSION=7
+BURN_MICRO_VERSION=0
 BURN_VERSION=$BURN_MAJOR_VERSION.$BURN_MINOR_VERSION.$BURN_MICRO_VERSION
 
 AC_SUBST(BURN_MAJOR_VERSION)
@@ -97,15 +99,16 @@ AC_SUBST(BURN_VERSION)
 dnl Libtool versioning
 LT_RELEASE=$BURN_MAJOR_VERSION.$BURN_MINOR_VERSION.$BURN_MICRO_VERSION
 dnl
-dnl ts A80510
+dnl ts A80717
-dnl ### This was the release version libburn-0.4.6 = libburn.so.4.11.0
+dnl This is the release version libburn-0.5.0 = libburn.so.4.15.0
-dnl This is the development version after above release version
+dnl ### This is the development version after above release version
 dnl LT_CURRENT++, LT_AGE++ has not yet happened.
+dnl ### LT_CURRENT++, LT_AGE++ has happened meanwhile.
 dnl
-dnl SONAME = 15 - 11 = 4 . Library name = libburn.so.4.11.0
+dnl SONAME = 19 - 15 = 4 . Library name = libburn.so.4.15.0
-LT_CURRENT=15
+LT_CURRENT=19
+LT_AGE=15
 LT_REVISION=0
-LT_AGE=11
 LT_CURRENT_MINUS_AGE=`expr $LT_CURRENT - $LT_AGE`
 
 AC_SUBST(LT_RELEASE)

libburn/async.c

@@ -43,7 +43,15 @@
 #include "libdax_msgs.h"
 extern struct libdax_msgs *libdax_messenger;
 
-#define SCAN_GOING() (workers && !workers->drive)
+/* ts A80714 : introduced type codes for the worker list */
+#define Burnworker_type_scaN    0
+#define Burnworker_type_erasE   1
+#define Burnworker_type_formaT  2
+#define Burnworker_type_writE   3
+#define Burnworker_type_fifO    4
+
+#define SCAN_GOING() (workers != NULL && \
+			workers->w_type == Burnworker_type_scaN)
 
 typedef void *(*WorkerFunc) (void *);
 
@@ -85,6 +93,9 @@ struct fifo_opts
 
 struct w_list
 {
+	/* ts A80714 */
+	int w_type; /* see above define Burnworker_type_* */
+
 	struct burn_drive *drive;
 	pthread_t thread;
 
@@ -113,7 +124,8 @@ static struct w_list *find_worker(struct burn_drive *d)
 	return NULL;
 }
 
-static void add_worker(struct burn_drive *d, WorkerFunc f, void *data)
+static void add_worker(int w_type, struct burn_drive *d,
+			WorkerFunc f, void *data)
 {
 	struct w_list *a;
 	struct w_list *tmp;
@@ -124,6 +136,7 @@ static void add_worker(struct burn_drive *d, WorkerFunc f, void *data)
 #endif
 
 	a = malloc(sizeof(struct w_list));
+	a->w_type = w_type;
 	a->drive = d;
 	a->u = *(union w_list_data *)data;
 
@@ -259,7 +272,8 @@ drive_is_active:;
 		o.drives = drives;
 		o.n_drives = n_drives;
 		o.done = 0;
-		add_worker(NULL, (WorkerFunc) scan_worker_func, &o);
+		add_worker(Burnworker_type_scaN, NULL,
+				 (WorkerFunc) scan_worker_func, &o);
 	} else if (workers->u.scan.done) {
 		/* its done */
 		ret = workers->u.scan.done;
@@ -303,7 +317,7 @@ void burn_disc_erase(struct burn_drive *drive, int fast)
 			"NULL pointer caught in burn_disc_erase", 0, 0);
 		return;
 	}
-	if ((SCAN_GOING()) || find_worker(drive)) {
+	if ((SCAN_GOING()) || find_worker(drive) != NULL) {
 		libdax_msgs_submit(libdax_messenger, drive->global_index,
 			0x00020102,
 			LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
@@ -343,7 +357,8 @@ void burn_disc_erase(struct burn_drive *drive, int fast)
 
 	o.drive = drive;
 	o.fast = fast;
-	add_worker(drive, (WorkerFunc) erase_worker_func, &o);
+	add_worker(Burnworker_type_erasE, drive,
+			(WorkerFunc) erase_worker_func, &o);
 }
 
 
@@ -364,7 +379,7 @@ void burn_disc_format(struct burn_drive *drive, off_t size, int flag)
 	int ok = 0;
 	char msg[160];
 
-	if ((SCAN_GOING()) || find_worker(drive)) {
+	if ((SCAN_GOING()) || find_worker(drive) != NULL) {
 		libdax_msgs_submit(libdax_messenger, drive->global_index,
 			0x00020102,
 			LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
@@ -411,7 +426,8 @@ void burn_disc_format(struct burn_drive *drive, off_t size, int flag)
 	o.drive = drive;
 	o.size = size;
 	o.flag = flag;
-	add_worker(drive, (WorkerFunc) format_worker_func, &o);
+	add_worker(Burnworker_type_formaT, drive,
+			(WorkerFunc) format_worker_func, &o);
 }
 
 
@@ -441,7 +457,7 @@ void burn_disc_write(struct burn_write_opts *opts, struct burn_disc *disc)
 	/* ts A61006 */
 	/* a ssert(!SCAN_GOING()); */
 	/* a ssert(!find_worker(opts->drive)); */
-	if ((SCAN_GOING()) || find_worker(opts->drive)) {
+	if ((SCAN_GOING()) || find_worker(opts->drive) != NULL) {
 		libdax_msgs_submit(libdax_messenger, opts->drive->global_index,
 			0x00020102,
 			LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
@@ -495,7 +511,8 @@ void burn_disc_write(struct burn_write_opts *opts, struct burn_disc *disc)
 
 	opts->refcount++;
 
-	add_worker(opts->drive, (WorkerFunc) write_disc_worker_func, &o);
+	add_worker(Burnworker_type_writE, opts->drive,
+			(WorkerFunc) write_disc_worker_func, &o);
 }
 
 
@@ -523,7 +540,8 @@ int burn_fifo_start(struct burn_source *source, int flag)
 
 	o.source = source;
 	o.flag = flag;
-	add_worker(NULL, (WorkerFunc) fifo_worker_func, &o);
+	add_worker(Burnworker_type_fifO, NULL,
+			(WorkerFunc) fifo_worker_func, &o);
 	fs->is_started = 1;
 	return 1;
 }

libburn/file.c

@@ -540,3 +540,64 @@ int burn_fifo_inquire_status(struct burn_source *source,
 	return ret;
 }
 
+
+int burn_fifo_peek_data(struct burn_source *source, char *buf, int bufsize,
+                        int flag)
+{
+	int size, free_bytes, ret, wait_count= 0;
+	char *status_text;
+	struct burn_source_fifo *fs = source->data;
+
+	/* Eventually start fifo thread by reading 0 bytes */
+	ret = fifo_read(source, (unsigned char *) NULL, 0);
+	if (ret<0)
+		return 0;
+
+	/* wait for at least bufsize bytes being ready */
+	while (1) {
+		ret= burn_fifo_inquire_status(source,
+					 &size, &free_bytes, &status_text);
+		if (size < bufsize) {
+			libdax_msgs_submit(libdax_messenger, -1, 0x0002015c,
+			LIBDAX_MSGS_SEV_FAILURE, LIBDAX_MSGS_PRIO_HIGH,
+		 	"Fifo size is smaller than desired peek buffer", 0, 0);
+			return -1;
+		}
+		if (fs->out_counter > 0 || (ret & 4) || fs->buf == NULL) {
+			libdax_msgs_submit(libdax_messenger, -1, 0x0002015e,
+			LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
+	 	"Fifo is already under consumption when peeking is desired",
+			0, 0);
+			return -1;
+		}
+		if(size - free_bytes >= bufsize) {
+
+			/* <<<
+			fprintf(stderr,
+		"libburn_DEBUG: after waiting cycle %d : fifo %s , %d bytes\n",
+			 wait_count, status_text, size - free_bytes);
+			*/
+
+			memcpy(buf, fs->buf, bufsize);
+			return 1;
+		}
+		if (ret&2) { /* input has ended, not enough data arrived */
+			libdax_msgs_submit(libdax_messenger, -1, 0x0002015d,
+			LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
+		 	"Fifo input ended short of desired peek buffer size",
+			0, 0);
+			return 0;
+		}
+		usleep(100000);
+		wait_count++;
+
+		/* <<<
+		if(wait_count%10==0)
+			fprintf(stderr,
+		 "libburn_DEBUG: waiting cycle %d : fifo %s , %d bytes\n",
+			 wait_count, status_text, size - free_bytes);
+		*/
+
+	}
+	return(0);
+}

libburn/libburn.h

@@ -198,10 +198,12 @@ enum burn_disc_status
 	BURN_DISC_FULL,
 
 	/* ts A61007 */
+        /* @since 0.2.4 */
 	/** The drive was not grabbed when the status was inquired */
 	BURN_DISC_UNGRABBED,
 
 	/* ts A61020 */
+        /* @since 0.2.6 */
 	/** The media seems not to be suitable for burning */
 	BURN_DISC_UNSUITABLE
 };
@@ -242,6 +244,7 @@ enum burn_drive_status
 	BURN_DRIVE_GRABBING,
 
 	/* ts A61102 */
+        /* @since 0.2.6 */
 	/** The drive gets written zeroes before the track payload data */
 	BURN_DRIVE_WRITING_PREGAP,
 	/** The drive is told to close a track (TAO only) */
@@ -250,10 +253,12 @@ enum burn_drive_status
 	BURN_DRIVE_CLOSING_SESSION,
 
 	/* ts A61223 */
+        /* @since 0.3.0 */
 	/** The drive is formatting media */
 	BURN_DRIVE_FORMATTING,
 
 	/* ts A70822 */
+        /* @since 0.4.0 */
 	/** The drive is busy in synchronous read (if you see this then it
 	    has been interrupted) */
 	BURN_DRIVE_READING_SYNC,
@@ -307,6 +312,7 @@ struct burn_toc_entry
 
 	/* ts A70201 : DVD extension.
 	   If invalid the members are guaranteed to be 0. */
+        /* @since 0.3.2 */
 	/* Tracks and session numbers are 16 bit. Here are the high bytes. */
 	unsigned char session_msb;
 	unsigned char point_msb;
@@ -402,6 +408,7 @@ struct burn_source {
 
 
 	/* ts A70125 : BROKE BINARY BACKWARD COMPATIBILITY AT libburn-0.3.1. */
+        /* @since 0.3.2 */
 	/** Program the reply of (*get_size) to a fixed value. It is advised
 	    to implement this by a attribute  off_t fixed_size;  in *data .
 	    The read() function does not have to take into respect this fake
@@ -449,7 +456,7 @@ struct burn_source {
 
 
 	/* ts A71222 : Supposed to be binary backwards compatible extension. */
-
+        /* @since 0.4.2 */
 	/** Valid only if above member .(*read)() is NULL. This indicates a
 	    version of struct burn_source younger than 0.
 	    From then on, member .version tells which further members exist
@@ -574,12 +581,14 @@ struct burn_progress {
 	int sector;
 
 	/* ts A61023 */
+        /* @since 0.2.6 */
 	/** The capacity of the drive buffer */
 	unsigned buffer_capacity;
 	/** The free space in the drive buffer (might be slightly outdated) */
 	unsigned buffer_available;
 
 	/* ts A61119 */
+        /* @since 0.2.6 */
 	/** The number of bytes sent to the drive buffer */
 	off_t buffered_bytes;
 	/** The minimum number of bytes stored in buffer during write.
@@ -591,6 +600,7 @@ struct burn_progress {
 
 
 /* ts A61226 */
+/* @since 0.3.0 */
 /** Description of a speed capability as reported by the drive in conjunction
     with eventually loaded media. There can be more than one such object per
     drive. So they are chained via .next and .prev , where NULL marks the end
@@ -673,6 +683,7 @@ void burn_finish(void);
     @return 1  ok, all went well
             0  had to leave a drive in unclean state
             <0 severe error, do no use libburn again
+    @since 0.2.6
 */
 int burn_abort(int patience, 
                int (*pacifier_func)(void *handle, int patience, int elapsed),
@@ -722,6 +733,7 @@ void burn_set_verbosity(int level);
     @param abort_on_busy  Unconditionally abort process when a non blocking
                           exclusive opening attempt indicates a busy drive.
                           Use this only after thorough tests with your app.
+    @since 0.2.2
 */
 void burn_preset_device_open(int exclusive, int blocking, int abort_on_busy);
 
@@ -735,6 +747,7 @@ void burn_preset_device_open(int exclusive, int blocking, int abort_on_busy);
     If ever then this call should be done soon after burn_initialize() before
     any drive scanning.
     @param yes 1=allow all implemented profiles, 0=only tested media (default)
+    @since 0.3.4
 */
 void burn_allow_untested_profiles(int yes);
 
@@ -818,17 +831,21 @@ void burn_allow_untested_profiles(int yes);
     @param load   Nonzero to make the drive attempt to load a disc (close its
                   tray door, etc).
     @return       1 = success , 0 = drive not found , -1 = other error
+    @since 0.2.2
 */    
 int burn_drive_scan_and_grab(struct burn_drive_info *drive_infos[],
                              char* adr, int load);
 
 
 /* ts A51221 */
+/* @since 0.2.2 */
 /** Maximum number of particularly permissible drive addresses */
 #define BURN_DRIVE_WHITELIST_LEN 255
+
 /** Add a device to the list of permissible drives. As soon as some entry is in
     the whitelist all non-listed drives are banned from scanning.
     @return 1 success, <=0 failure
+    @since 0.2.2
 */
 int burn_drive_add_whitelist(char *device_address);
 
@@ -875,6 +892,7 @@ int burn_drive_scan(struct burn_drive_info *drive_infos[],
                  Use these two only. Further values are to be defined.
     @return 1 on success, 2 if drive was already forgotten,
             0 if not permissible, <0 on other failures, 
+    @since 0.2.2
 */
 int burn_drive_info_forget(struct burn_drive_info *drive_info, int force);
 
@@ -887,23 +905,28 @@ void burn_drive_info_free(struct burn_drive_info drive_infos[]);
 
 
 /* ts A60823 */
+/* @since 0.2.2 */
 /** Maximum length+1 to expect with a persistent drive address string */
 #define BURN_DRIVE_ADR_LEN 1024
 
+/* ts A70906 */
 /** Inquire the persistent address of the given drive.
     @param drive The drive to inquire.
     @param adr   An application provided array of at least BURN_DRIVE_ADR_LEN
                  characters size. The persistent address gets copied to it.
     @return >0 success , <=0 error (due to libburn internal problem)
+    @since 0.4.0
 */
 int burn_drive_d_get_adr(struct burn_drive *drive, char adr[]);
 
+/* A60823 */
 /** Inquire the persistent address of a drive via a given drive_info object.
     (Note: This is a legacy call.)
     @param drive_info The drive to inquire.Usually some &(drive_infos[driveno])
     @param adr   An application provided array of at least BURN_DRIVE_ADR_LEN
                  characters size. The persistent address gets copied to it.
     @return >0 success , <=0 error (due to libburn internal problem)
+    @since 0.2.6
 */
 int burn_drive_get_adr(struct burn_drive_info *drive_info, char adr[]);
 
@@ -912,6 +935,7 @@ int burn_drive_get_adr(struct burn_drive_info *drive_info, char adr[]);
 /** Evaluate whether the given address would be a possible persistent drive
     address of libburn.
     @return 1 means yes, 0 means no
+    @since 0.2.6
 */
 int burn_drive_is_enumerable_adr(char *adr);
 
@@ -924,6 +948,7 @@ int burn_drive_is_enumerable_adr(char *adr);
     @param adr  An application provided array of at least BURN_DRIVE_ADR_LEN
                 characters size. The persistent address gets copied to it.
     @return     1 = success , 0 = failure , -1 = severe error
+    @since 0.2.6
 */
 int burn_drive_convert_fs_adr(char *path, char adr[]);
 
@@ -941,6 +966,7 @@ int burn_drive_convert_fs_adr(char *path, char adr[]);
     @param adr  An application provided array of at least BURN_DRIVE_ADR_LEN
                 characters size. The persistent address gets copied to it.
     @return     1 = success , 0 = failure , -1 = severe error
+    @since 0.2.6
 */
 int burn_drive_convert_scsi_adr(int bus_no, int host_no, int channel_no,
 				 int target_no, int lun_no, char adr[]);
@@ -951,6 +977,7 @@ int burn_drive_convert_scsi_adr(int bus_no, int host_no, int channel_no,
     drive address obtained via burn_drive_d_get_adr(). It is also supposed to
     succeed with any device file of a (possibly emulated) SCSI device.
     @return     1 = success , 0 = failure , -1 = severe error
+    @since 0.2.6
 */
 int burn_drive_obtain_scsi_adr(char *path, int *bus_no, int *host_no,
 				int *channel_no, int *target_no, int *lun_no);
@@ -983,6 +1010,7 @@ void burn_drive_release(struct burn_drive *drive, int eject);
     @param drive The drive to release and leave locked.
     @param flag Bitfield for control purposes (unused yet, submit 0)
     @return 1 means success, <=0 means failure
+    @since 0.4.0
 */
 int burn_drive_leave_locked(struct burn_drive *d, int flag);
 
@@ -1003,6 +1031,7 @@ enum burn_disc_status burn_disc_get_status(struct burn_drive *drive);
     or BURN_DISC_UNSUITABLE. Thus marking media as writable which actually
     failed to declare themselves either blank or (partially) filled.
     @return 1 drive status has been set , 0 = unsuitable drive status
+    @since 0.2.6
 */
 int burn_disc_pretend_blank(struct burn_drive *drive);
 
@@ -1012,6 +1041,7 @@ int burn_disc_pretend_blank(struct burn_drive *drive);
     Sets the drive status to BURN_DISC_FULL if it is BURN_DISC_UNREADY
     or BURN_DISC_UNSUITABLE. Thus marking media as blankable which actually
     failed to declare themselves either blank or (partially) filled.
+    @since 0.2.6
 */
 int burn_disc_pretend_full(struct burn_drive *drive);
 
@@ -1022,6 +1052,7 @@ int burn_disc_pretend_full(struct burn_drive *drive);
     burn_drive_get_start_end_lba(). The drive must be grabbed for this call.
     @param drive The drive to query.
     @return 1=sucess, 0=no valid ATIP info read, -1 severe error
+    @since 0.2.6
 */
 int burn_disc_read_atip(struct burn_drive *drive);
 
@@ -1036,6 +1067,7 @@ int burn_disc_read_atip(struct burn_drive *drive);
     @param end_lba Returns the end lba value
     @param flag Bitfield for control purposes (unused yet, submit 0)
     @return 1 if lba values are valid , 0 if invalid
+    @since 0.2.6
 */
 int burn_drive_get_start_end_lba(struct burn_drive *drive,
                                  int *start_lba, int *end_lba, int flag);
@@ -1053,6 +1085,7 @@ int burn_drive_get_start_end_lba(struct burn_drive *drive,
     @param lba return value: start lba
     @param nwa return value: Next Writeable Address
     @return 1=nwa is valid , 0=nwa is not valid , -1=error
+    @since 0.2.6
 */
 int burn_disc_track_lba_nwa(struct burn_drive *d, struct burn_write_opts *o,
 				int trackno, int *lba, int *nwa);
@@ -1064,6 +1097,7 @@ int burn_disc_track_lba_nwa(struct burn_drive *d, struct burn_write_opts *o,
     @param d The drive to query.
     @param start_lba returns the start address of that track
     @return <= 0 : failure, 1 = ok 
+    @since 0.3.2
 */
 int burn_disc_get_msc1(struct burn_drive *d, int *start_lba);
 
@@ -1080,6 +1114,7 @@ int burn_disc_get_msc1(struct burn_drive *d, int *start_lba);
     @param d The drive to query.
     @param o If not NULL: write parameters to be set on drive before query
     @return number of most probably available free bytes
+    @since 0.3.4
 */
 off_t burn_disc_available_space(struct burn_drive *d,
                                 struct burn_write_opts *o);
@@ -1107,6 +1142,7 @@ off_t burn_disc_available_space(struct burn_drive *d,
     @param pno Profile Number. See also mmc5r03c.pdf, table 89
     @param name Profile Name (see above list, unknown profiles have empty name)
     @return 1 profile is valid, 0 no profile info available 
+    @since 0.3.0
 */
 int burn_disc_get_profile(struct burn_drive *d, int *pno, char name[80]);
 
@@ -1136,6 +1172,7 @@ struct burn_write_opts *burn_write_opts_new(struct burn_drive *drive);
 /** Inquires the drive associated with a burn_write_opts object.
     @param opts object to inquire
     @return pointer to drive
+    @since 0.4.0
 */
 struct burn_drive *burn_write_opts_get_drive(struct burn_write_opts *opts);
 
@@ -1205,16 +1242,19 @@ void burn_disc_erase(struct burn_drive *drive, int fast);
                       Acceptable types are: 0x00, 0x01, 0x10, 0x11, 0x13,
                       0x15, 0x26, 0x30, 0x31.
                       If bit7 is set, bit4 is set automatically.
+    @since 0.3.0
 */
 void burn_disc_format(struct burn_drive *drive, off_t size, int flag);
 
 
 /* ts A70112 */
+/* @since 0.3.0 */
 /** Possible formatting status values */
 #define BURN_FORMAT_IS_UNFORMATTED 1
 #define BURN_FORMAT_IS_FORMATTED   2
 #define BURN_FORMAT_IS_UNKNOWN     3
 
+/* ts A70112 */
 /** Inquire the formatting status, the associated sizes and the number of
     available formats.  The info is media specific and stems from MMC command
     23h READ FORMAT CAPACITY. See mmc5r03c.pdf 6.24 for background details.
@@ -1233,10 +1273,12 @@ void burn_disc_format(struct burn_drive *drive, off_t size, int flag);
                        burn_disc_get_format_descr() to obtain such a format
                        and eventually with burn_disc_format() to select one.
     @return 1 reply is valid , <=0 failure
+    @since 0.3.0
 */
 int burn_disc_get_formats(struct burn_drive *drive, int *status, off_t *size,
 				unsigned *bl_sas, int *num_formats);
 
+/* ts A70112 */
 /** Inquire parameters of an available media format.
     @param drive The drive with the disc to format.
     @param index The index of the format item. Beginning with 0 up to reply
@@ -1249,6 +1291,7 @@ int burn_disc_get_formats(struct burn_drive *drive, int *status, off_t *size,
     @param size  The maximum size in bytes achievable with this format.
     @param tdp   Type Dependent Parameter. See mmc5r03c.pdf.
     @return 1 reply is valid , <=0 failure
+    @since 0.3.0
 */
 int burn_disc_get_format_descr(struct burn_drive *drive, int index,
 				int *type, off_t *size, unsigned *tdp);
@@ -1267,6 +1310,7 @@ void burn_disc_read(struct burn_drive *drive, const struct burn_read_opts *o);
 
 
 /* ts A70222 */
+/* @since 0.3.4 */
 /** The length of a rejection reasons string for burn_precheck_write() and
     burn_write_opts_auto_write_type() .
 */
@@ -1282,6 +1326,7 @@ void burn_disc_read(struct burn_drive *drive, const struct burn_read_opts *o);
     @param reasons Eventually returns a list of rejection reason statements
     @param silent 1= do not issue error messages , 0= report problems
     @return 1 ok, -1= no recordable media detected, 0= other failure
+    @since 0.3.4
 */
 int burn_precheck_write(struct burn_write_opts *o, struct burn_disc *disc,
                         char reasons[BURN_REASONS_LEN], int silent);
@@ -1315,6 +1360,7 @@ void burn_drive_cancel(struct burn_drive *drive);
     during write, a call to burn_drive_cancel() by the application thread.
     @param d The drive to inquire.
     @return 1=burn seems to have went well, 0=burn failed 
+    @since 0.2.6
 */
 int burn_drive_wrote_well(struct burn_drive *d);
 
@@ -1431,6 +1477,7 @@ void burn_track_define_data(struct burn_track *t, int offset, int tail,
     @param t The track to change
     @param swap_source_bytes 0=do not swap, 1=swap byte pairs
     @return 1=success , 0=unacceptable value
+    @since 0.2.6
 */
 int burn_track_set_byte_swap(struct burn_track *t, int swap_source_bytes);
 
@@ -1484,6 +1531,7 @@ enum burn_source_status burn_track_set_source(struct burn_track *t,
     @param t The track to change
     @param size The size to set
     @return 0=failure 1=sucess
+    @since 0.3.4
 */
 int burn_track_set_default_size(struct burn_track *t, off_t size);
 
@@ -1543,6 +1591,7 @@ struct burn_source *burn_fd_source_new(int datafd, int subfd, off_t size);
                       to be disposed by calling burn_source_free() for each.
                       inp can be freed immediately, the returned fifo may be
                       kept as handle for burn_fifo_inquire_status().
+    @since 0.4.0
 */
 struct burn_source *burn_fifo_source_new(struct burn_source *inp,
                                          int chunksize, int chunks, int flag);
@@ -1564,17 +1613,43 @@ struct burn_source *burn_fifo_source_new(struct burn_source *inp,
              5="abandoned" : consumption has ended prematurely
              6="ended"     : consumption has ended without input error
              7="aborted"   : consumption has ended after input error
+    @since 0.4.0
 */
 int burn_fifo_inquire_status(struct burn_source *fifo, int *size, 
                             int *free_bytes, char **status_text);
 
 
+/* ts A80713 */
+/** Obtain a preview of the first input data of a fifo which was created
+    by burn_fifo_source_new(). The data will later be delivered normally to
+    the consumer track of the fifo.
+    bufsize may not be larger than the fifo size (chunk_size * chunks).
+    This call will succeed only if data consumption by the track has not
+    started yet, i.e. best before the call to burn_disc_write().
+    It will start the worker thread of the fifo with the expectable side
+    effects on the external data source. Then it waits either until enough
+    data have arrived or until it becomes clear that this will not happen.
+    The call may be repeated with increased bufsize. It will always yield
+    the bytes beginning from the first one in the fifo.
+    @param fifo     The fifo object to inquire
+    @param buf      Pointer to memory of at least bufsize bytes where to
+                    deliver the peeked data
+    @param bufsize  Number of bytes to peek from the start of the fifo data
+    @param flag     Bitfield for control purposes (unused yet, submit 0).
+    @return <0 on severe error, 0 if not enough data, 1 if bufsize bytes read
+    @since 0.5.0
+*/
+int burn_fifo_peek_data(struct burn_source *source, char *buf, int bufsize,
+                        int flag);
+
+
 /* ts A70328 */
 /** Sets a fixed track size after the data source object has already been
     created.
     @param t The track to operate on
     @param size the number of bytes to use as track size
     @return <=0 indicates failure , >0 success
+    @since 0.3.6
 */
 int burn_track_set_size(struct burn_track *t, off_t size);
 
@@ -1587,7 +1662,12 @@ int burn_track_get_sectors(struct burn_track *);
 
 /* ts A61101 */
 /** Tells how many source bytes have been read and how many data bytes have
-    been written by the track during burn */
+    been written by the track during burn.
+    @param t The track to inquire
+    @param read_bytes Number of bytes read from the track source
+    @param written_bytes Number of bytes written to track
+    @since 0.2.6
+*/
 int burn_track_get_counters(struct burn_track *t, 
                             off_t *read_bytes, off_t *written_bytes);
 
@@ -1632,6 +1712,7 @@ void burn_drive_set_speed(struct burn_drive *d, int read, int write);
     @param min_percent Minimum of desired buffer oscillation: 25 to 100
     @param max_percent Maximum of desired buffer oscillation: 25 to 100
     @return 1=success , 0=failure
+    @since 0.3.8
 */
 int burn_drive_set_buffer_waiting(struct burn_drive *d, int enable,
                                 int min_usec, int max_usec, int timeout_sec,
@@ -1669,6 +1750,7 @@ int burn_write_opts_set_write_type(struct burn_write_opts *opts,
                 bit1= do not issue error messages via burn_msgs queue
                       (is automatically set with bit0)
     @return Chosen write type. BURN_WRITE_NONE on failure.
+    @since 0.3.2
 */
 enum burn_write_types burn_write_opts_auto_write_type(
           struct burn_write_opts *opts, struct burn_disc *disc,
@@ -1733,6 +1815,7 @@ void burn_write_opts_set_mediacatalog(struct burn_write_opts *opts, unsigned cha
     being the last one and thus creating a BURN_DISC_APPENDABLE media.
     @param opts The option object to be manipulated
     @param multi 1=media will be appendable, 0=media will be closed (default) 
+    @since 0.2.6
 */
 void burn_write_opts_set_multi(struct burn_write_opts *opts, int multi);
 
@@ -1749,6 +1832,7 @@ void burn_write_opts_set_multi(struct burn_write_opts *opts, int multi);
     .start_range_low , .start_range_high .
     @param opts The write opts to change
     @param value The address in bytes (-1 = start at default address)
+    @since 0.3.0
 */
 void burn_write_opts_set_start_byte(struct burn_write_opts *opts, off_t value);
 
@@ -1761,6 +1845,7 @@ void burn_write_opts_set_start_byte(struct burn_write_opts *opts, off_t value);
     by the last track of the last session.
     @param opts The write opts to change
     @param fill_up_media If 1 : fill up by last track, if 0 = do not fill up
+    @since 0.3.4
 */
 void burn_write_opts_set_fillup(struct burn_write_opts *opts,
                                 int fill_up_media);
@@ -1772,6 +1857,7 @@ void burn_write_opts_set_fillup(struct burn_write_opts *opts,
     - the check whether the media profile supports simulated burning 
     @param opts The write opts to change
     @param use_force 1=ignore above checks, 0=refuse work on failed check
+    @since 0.3.4
 */
 void burn_write_opts_set_force(struct burn_write_opts *opts, int use_force);
 
@@ -1782,9 +1868,9 @@ void burn_write_opts_set_force(struct burn_write_opts *opts, int use_force);
     slowdown to half nominal speed. But if it speeds up writing then it also
     disables error management and correction. Weigh your priorities.
     This only affects the write operations of burn_disc_write().
-    @since 0.4.6
     @param opts The write opts to change
     @param value  0=use 2Ah WRITE10, 1=use AAh WRITE12 with Streaming bit
+    @since 0.4.6
 */
 void burn_write_opts_set_stream_recording(struct burn_write_opts *opts, 
                                          int value);
@@ -1860,6 +1946,7 @@ int burn_drive_get_write_speed(struct burn_drive *d);
     again by call burn_drive_grab() and again by call burn_disc_read_atip().
     @param d Drive to query
     @return Minimum write speed in K/s
+    @since 0.2.6
 */
 int burn_drive_get_min_write_speed(struct burn_drive *d);
 
@@ -1882,6 +1969,7 @@ int burn_drive_get_read_speed(struct burn_drive *d);
     @param d Drive to query
     @param speed_list The copy. If empty, *speed_list gets returned as NULL.
     @return 1=success , 0=list empty , <0 severe error
+    @since 0.3.0
 */
 int burn_drive_get_speedlist(struct burn_drive *d,
                              struct burn_speed_descriptor **speed_list);
@@ -1901,6 +1989,7 @@ int burn_drive_get_speedlist(struct burn_drive *d,
                 bit1= look for any source type (else look for source==2 first
 	              and for any other source type only with CD media)
     @return >0 indicates a valid best_descr, 0 = no valid best_descr
+    @since 0.3.8
 */
 int burn_drive_get_best_speed(struct burn_drive *d, int speed_goal,
                         struct burn_speed_descriptor **best_descr, int flag);
@@ -1911,11 +2000,13 @@ int burn_drive_get_best_speed(struct burn_drive *d, int speed_goal,
     burn_drive_get_speedlist().
     @param speed_list The list copy. *speed_list gets set to NULL.
     @return 1=list disposed , 0= *speedlist was already NULL
+    @since 0.3.0
 */
 int burn_drive_free_speedlist(struct burn_speed_descriptor **speed_list);
 
 
 /* ts A70203 */
+/* @since 0.3.2 */
 /** The reply structure for burn_disc_get_multi_caps()
 */
 struct burn_multi_caps {
@@ -1993,7 +2084,8 @@ struct burn_multi_caps {
 	/** Wether the current profile indicates CD media. 1=yes, 0=no */
 	int current_is_cd_profile;
 
-        /* ts A70528, added to version 0.3.7 */
+        /* ts A70528 */
+        /* @since 0.3.8 */
 	/** Wether the current profile is able to perform simulated write */
 	int might_simulate;
 };
@@ -2010,6 +2102,7 @@ struct burn_multi_caps {
     @param caps returns the info structure
     @param flag Bitfield for control purposes (unused yet, submit 0)
     @return < 0 : error , 0 : writing seems impossible , 1 : writing possible 
+    @since 0.3.2
 */
 int burn_disc_get_multi_caps(struct burn_drive *d, enum burn_write_types wt,
 			 struct burn_multi_caps **caps, int flag);
@@ -2018,6 +2111,7 @@ int burn_disc_get_multi_caps(struct burn_drive *d, enum burn_write_types wt,
     burn_disc_get_multi_caps(). The pointer *caps gets set to NULL.
     @param caps the info structure to dispose (note: pointer to pointer)
     @return 0 : *caps was already NULL, 1 : memory object was disposed
+    @since 0.3.2
 */
 int burn_disc_free_multi_caps(struct burn_multi_caps **caps);
 
@@ -2080,6 +2174,7 @@ void burn_version(int *major, int *minor, int *micro);
 
 
 /* ts A80129 */
+/* @since 0.4.4 */
 /** These three release version numbers tell the revision of this header file
     and of the API it describes. They are memorized by applications at build
     time.
@@ -2097,8 +2192,8 @@ void burn_version(int *major, int *minor, int *micro);
 
 */
 #define burn_header_version_major  0
-#define burn_header_version_minor  4
+#define burn_header_version_minor  5
-#define burn_header_version_micro  7
+#define burn_header_version_micro  0
 /** Note:
     Above version numbers are also recorded in configure.ac because libtool
     wants them as parameters at build time.
@@ -2160,12 +2255,13 @@ These two advises are mutually exclusive.
                           to stderr. Default: "FATAL".
     @param print_id       A text prefix to be printed before the message.
     @return               >0 for success, <=0 for error
-
+    @since 0.2.6
 */
 int burn_msgs_set_severities(char *queue_severity,
                              char *print_severity, char *print_id);
 
 /* ts A60924 : ticket 74 */
+/*  @since 0.2.6 */
 #define BURN_MSGS_MESSAGE_LEN 4096
 
 /** Obtain the oldest pending libburn message from the queue which has at
@@ -2183,6 +2279,7 @@ int burn_msgs_set_severities(char *queue_severity,
     @param severity   Will become the severity related to the message and
                       should provide at least 80 bytes.
     @return 1 if a matching item was found, 0 if not, <0 for severe errors
+    @since 0.2.6
 */
 int burn_msgs_obtain(char *minimum_severity,
                      int *error_code, char msg_text[], int *os_errno,
@@ -2205,6 +2302,7 @@ int burn_msgs_obtain(char *minimum_severity,
                       Submit NULL if the message is not specific to a
                       particular drive object.
     @return           1 if message was delivered, <=0 if failure
+    @since 0.4.0
 */
 int burn_msgs_submit(int error_code, char msg_text[], int os_errno,
                      char severity[], struct burn_drive *d);
@@ -2217,6 +2315,7 @@ int burn_msgs_submit(int error_code, char msg_text[], int os_errno,
     @param severity_number The rank number: the higher, the more severe.
     @param flag Bitfield for control purposes (unused yet, submit 0)
     @return >0 success, <=0 failure
+    @since 0.4.0
 */
 int burn_text_to_sev(char *severity_name, int *severity_number, int flag);
 
@@ -2227,6 +2326,7 @@ int burn_text_to_sev(char *severity_name, int *severity_number, int flag);
     @param severity_number The rank number: the higher, the more severe.
     @param severity_name A name as with burn_msgs_submit(), e.g. "SORRY".
     @param flag Bitfield for control purposes (unused yet, submit 0)
+    @since 0.4.4
 */
 int burn_sev_to_text(int severity_number, char **severity_name, int flag);
 
@@ -2238,11 +2338,13 @@ int burn_sev_to_text(int severity_number, char **severity_name, int flag);
     See also: libisofs, API function iso_get_messenger().
     @param messenger The foreign but compatible message handle.
     @return 1 : success, <=0 : failure
+    @since 0.4.0
 */
 int burn_set_messenger(void *messenger);
 
 
 /* ts A61002 */
+/* @since 0.2.6 */
 /** The prototype of a handler function suitable for burn_set_abort_handling().
     Such a function has to return -2 if it does not want the process to
     exit with value 1.
@@ -2261,6 +2363,7 @@ typedef int (*burn_abort_handler_t)(void *handle, int signum, int flag);
     Arguments (text, NULL, 0) activate the builtin abort handler. It will
     eventually call burn_abort() and then perform exit(1). If text is not NULL
     then it is used as prefix for pacifier messages of burn_abort_pacifier().
+    @since 0.2.6
 */
 void burn_set_signal_handling(void *handle, burn_abort_handler_t handler, 
 			     int mode);
@@ -2293,6 +2396,7 @@ void burn_set_signal_handling(void *handle, burn_abort_handler_t handler,
     @param flag         Bitfield for control purposes:
                         bit0 = flush the drive buffer after eventual writing
     @return 1=sucessful , <=0 : number of transfered bytes * -1
+    @since 0.4.0
 */
 int burn_random_access_write(struct burn_drive *d, off_t byte_address,
                              char *data, off_t data_count, int flag);
@@ -2317,6 +2421,7 @@ int burn_random_access_write(struct burn_drive *d, off_t byte_address,
                         bit0= - reserved -
                         bit1= do not submit error message if read error
     @return 1=sucessful , <=0 an error occured
+    @since 0.4.0
 */
 int burn_read_data(struct burn_drive *d, off_t byte_address,
                    char data[], off_t data_size, off_t *data_count, int flag);
@@ -2330,6 +2435,7 @@ int burn_read_data(struct burn_drive *d, off_t byte_address,
                   1= real MMC drive
                   2= stdio-drive, random access, read-write
                   3= stdio-drive, sequential, write-only
+    @since 0.4.0
 */
 int burn_drive_get_drive_role(struct burn_drive *d);
 
@@ -2356,6 +2462,7 @@ int burn_drive_get_drive_role(struct burn_drive *d);
                    prefix "stdio:".
     @return        1= adr2 leads to d1 , 0= adr2 seems not to lead to d1,
                    -1 = adr2 is bad
+    @since 0.4.0
 */
 int burn_drive_equals_adr(struct burn_drive *d1, char *adr2, int drive_role2);
 

libburn/libdax_msgs.h

@@ -524,6 +524,11 @@ Range "scdbackup"          :  0x00020000 to 0x0002ffff
  0x00020157 (FATAL,HIGH)   = burn_source is not a fifo object
  0x00020158 (DEBUG,LOW)    = Reporting thread disposal precautions
  0x00020159 (DEBUG,HIGH)   = TOC Format 0 returns inconsistent data
+ 0x0002015a (NOTE,HIGH)    = Could not examine busy device
+ 0x0002015b (HINT,HIGH)    = Busy '...' seems to be a hard disk, as '...1' exists
+ 0x0002015c (FAILURE,HIGH) = Fifo size is smaller than desired peek buffer
+ 0x0002015d (FAILURE,HIGH) = Fifo input ended short of desired peek buffer size
+ 0x0002015e (FATAL,HIGH)   = Fifo is already under consumption when peeking
 
  libdax_audioxtr:
  0x00020200 (SORRY,HIGH)   = Cannot open audio source file

libburn/sg-linux.c

@@ -260,6 +260,37 @@ static void sg_select_device_family(void)
 }
 
 
+/* ts A80701 */
+/* This cares for the case that no /dev/srNN but only /dev/scdNN exists.
+   A theoretical case which has its complement in SuSE 10.2 having
+   /dev/sr but not /dev/scd.
+*/
+static int sg_exchange_scd_for_sr(char *fname, int flag)
+{
+	struct stat stbuf;
+	char scd[17], msg[160];
+
+	if (burn_sg_use_family != 0 || strncmp(fname, "/dev/sr", 7)!=0 ||
+	    strlen(fname)>9 || strlen(fname)<8)
+		return 2;
+	if (fname[7] < '0' || fname[7] > '9')
+		return 2;
+	if (fname [8] != 0 && (fname[7] < '0' || fname[7] > '9'))
+		return 2;
+	if (stat(fname, &stbuf) != -1)
+		return 2;
+	strcpy(scd, "/dev/scd");
+	strcpy(scd + 8, fname + 7);
+	if (stat(scd, &stbuf) == -1)
+		return 2;
+	sprintf(msg, "%s substitutes for non-existent %s", scd, fname);
+	libdax_msgs_submit(libdax_messenger, -1, 0x00000002,
+		LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_HIGH, msg, 0, 0);
+	strcpy(fname, scd);
+	return 1;
+}
+
+
 static int sgio_test(int fd)
 {
 	unsigned char test_ops[] = { 0, 0, 0, 0, 0, 0 };
@@ -279,6 +310,33 @@ static int sgio_test(int fd)
 static int sg_handle_busy_device(char *fname, int os_errno)
 {
 	char msg[4096];
+	struct stat stbuf;
+	int looks_like_hd= 0, fd, ret;
+
+	/* ts A80713 :
+	   check existence of /dev/hdX1 as hint for hard disk rather than CD
+	   Hint by Giulio Orsero: check /proc/ide/hdX/media for "disk"
+	*/
+	if (strncmp(fname, "/dev/hd", 7)==0) {
+		sprintf(msg, "%s1", fname);
+		if (stat(msg, &stbuf) != -1)
+			looks_like_hd= 1;
+		sprintf(msg, "/proc/ide/hd%c/media", fname[7]);
+		fd = open(msg, O_RDONLY);
+		if (fd != -1) {
+			ret = read(fd, msg, 10);
+			if (ret < 0)
+				ret = 0;
+			msg[ret]= 0;
+			close(fd);
+			if (strncmp(msg, "disk\n", 5) == 0 ||
+			    strcmp(msg, "disk") == 0)
+				looks_like_hd= 2;
+			else if (strncmp(msg, "cdrom\n", 6) == 0 ||
+			         strcmp(msg, "cdrom") == 0)
+				looks_like_hd= 0;
+		}
+	}
 
 	/* ts A60814 : i saw no way to do this more nicely */ 
 	if (burn_sg_open_abort_busy) {
@@ -292,10 +350,26 @@ static int sg_handle_busy_device(char *fname, int os_errno)
 	}
 
 	/* ts A60924 : now reporting to libdax_msgs */
+	if (looks_like_hd == 2) { /* is surely hard disk */
+		;
+	} else if (looks_like_hd) {
+		sprintf(msg, "Could not examine busy device '%s'", fname);
+		libdax_msgs_submit(libdax_messenger, -1, 0x0002015a,
+				LIBDAX_MSGS_SEV_NOTE, LIBDAX_MSGS_PRIO_LOW,
+				msg, os_errno, 0);
+		sprintf(msg,
+	"Busy '%s' seems to be a hard disk, as '%s1' exists. But better check.",
+				fname, fname);
+		libdax_msgs_submit(libdax_messenger, -1, 0x0002015b,
+				LIBDAX_MSGS_SEV_HINT, LIBDAX_MSGS_PRIO_LOW,
+				msg, 0, 0);
+
+	} else {
 		sprintf(msg, "Cannot open busy device '%s'", fname);
 		libdax_msgs_submit(libdax_messenger, -1, 0x00020001,
 				LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_LOW,
 				msg, os_errno, 0);
+	}
 	return 1;
 }
 
@@ -646,7 +720,7 @@ static void sg_enumerate(void)
 	int i, fd, sibling_fds[BURN_OS_SG_MAX_SIBLINGS], sibling_count= 0, ret;
 	int sid_ret = 0;
 	int bus_no= -1, host_no= -1, channel_no= -1, target_no= -1, lun_no= -1;
-	char fname[10];
+	char fname[17];
 	char sibling_fnames[BURN_OS_SG_MAX_SIBLINGS][BURN_OS_SG_MAX_NAMELEN];
 
         sg_select_device_family();
@@ -661,6 +735,9 @@ static void sg_enumerate(void)
 	for (i = 0; i < 32; i++) {
 		sprintf(fname, linux_sg_device_family, i);
 
+		/* ts A80702 */
+		sg_exchange_scd_for_sr(fname, 0);
+
 		if (linux_sg_enumerate_debug)
 		  fprintf(stderr, "libburn_debug: %s : ", fname);
 
@@ -893,6 +970,10 @@ int sg_give_next_adr(burn_drive_enumerator_t *idx,
 	if (adr_size < 10)
 		return -1;
 	sprintf(adr, linux_sg_device_family, *idx);
+
+	/* ts A80702 */
+	sg_exchange_scd_for_sr(adr, 0);
+
 	return 1;
 next_ata:;
 	baseno += sg_limit;
@@ -1378,7 +1459,6 @@ int sg_is_enumerable_adr(char *adr)
 			sg_give_next_adr(&idx, fname, sizeof(fname), -1);
 			return 1;
 		}
-
 	}
 	sg_give_next_adr(&idx, fname, sizeof(fname), -1);
 	return(0);