/* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */ /* ts A61009 */ /* #include */ #include #include #include #include #include #include "error.h" #include "sector.h" #include "libburn.h" #include "transport.h" #include "mmc.h" #include "spc.h" #include "drive.h" #include "debug.h" #include "toc.h" #include "structure.h" #include "options.h" #ifdef Libburn_log_in_and_out_streaM /* <<< ts A61031 */ #include #include #include #endif /* Libburn_log_in_and_out_streaM */ /* ts A61005 */ #include "libdax_msgs.h" extern struct libdax_msgs *libdax_messenger; /* ts A61219 : ! HIGHLY EXPERIMENTAL ! Based on knowlege from dvd+rw-tools-7.0 and mmc5r03c.pdf */ /* #define Libburn_support_dvd_plus_rW 1 */ /* Progress report (with Libburn_support_dvd_plus_rW defined): ts A61219 : It seems to work with a used (i.e. thoroughly formatted) DVD+RW. Error messages of class DEBUG appear because of inability to read TOC or track info. Nevertheless, the written images verify. ts A61220 : Burned to a virgin DVD+RW by help of new mmc_format_unit() (did not test wether it would work without). Burned to a not completely formatted DVD+RW. (Had worked before without mmc_format_unit(). I did not exceed the formatted range as reported by dvd+rw-mediainfo. */ static unsigned char MMC_GET_TOC[] = { 0x43, 2, 2, 0, 0, 0, 0, 16, 0, 0 }; static unsigned char MMC_GET_ATIP[] = { 0x43, 2, 4, 0, 0, 0, 0, 16, 0, 0 }; static unsigned char MMC_GET_DISC_INFO[] = { 0x51, 0, 0, 0, 0, 0, 0, 16, 0, 0 }; static unsigned char MMC_READ_CD[] = { 0xBE, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; static unsigned char MMC_ERASE[] = { 0xA1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; static unsigned char MMC_SEND_OPC[] = { 0x54, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; static unsigned char MMC_SET_SPEED[] = { 0xBB, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; static unsigned char MMC_WRITE_12[] = { 0xAA, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; static unsigned char MMC_WRITE_10[] = { 0x2A, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; /* ts A61201 : inserted 0, before 16, */ static unsigned char MMC_GET_CONFIGURATION[] = { 0x46, 0, 0, 0, 0, 0, 0, 16, 0, 0 }; static unsigned char MMC_SYNC_CACHE[] = { 0x35, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; static unsigned char MMC_GET_EVENT[] = { 0x4A, 1, 0, 0, 16, 0, 0, 0, 8, 0 }; static unsigned char MMC_CLOSE[] = { 0x5B, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; static unsigned char MMC_TRACK_INFO[] = { 0x52, 0, 0, 0, 0, 0, 0, 16, 0, 0 }; static unsigned char MMC_SEND_CUE_SHEET[] = { 0x5D, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; /* ts A61023 : get size and free space of drive buffer */ static unsigned char MMC_READ_BUFFER_CAPACITY[] = { 0x5C, 0, 0, 0, 0, 0, 0, 16, 0, 0 }; /* ts A61219 : format DVD+RW (and various others) */ static unsigned char MMC_FORMAT_UNIT[] = { 0x04, 0x11, 0, 0, 0, 0 }; static int mmc_function_spy_do_tell = 0; int mmc_function_spy(char * text) { if (mmc_function_spy_do_tell) fprintf(stderr,"libburn: experimental: mmc_function_spy: %s\n", text); return 1; } int mmc_function_spy_ctrl(int do_tell) { mmc_function_spy_do_tell= !!do_tell; return 1; } void mmc_send_cue_sheet(struct burn_drive *d, struct cue_sheet *s) { struct buffer buf; struct command c; mmc_function_spy("mmc_send_cue_sheet"); c.retry = 1; c.oplen = sizeof(MMC_SEND_CUE_SHEET); memcpy(c.opcode, MMC_SEND_CUE_SHEET, sizeof(MMC_SEND_CUE_SHEET)); c.page = &buf; c.page->bytes = s->count * 8; c.page->sectors = 0; c.opcode[6] = (c.page->bytes >> 16) & 0xFF; c.opcode[7] = (c.page->bytes >> 8) & 0xFF; c.opcode[8] = c.page->bytes & 0xFF; c.dir = TO_DRIVE; memcpy(c.page->data, s->data, c.page->bytes); d->issue_command(d, &c); } /* ts A61110 : added parameters trackno, lba, nwa. Redefined return value. @return 1=nwa is valid , 0=nwa is not valid , -1=error */ int mmc_get_nwa(struct burn_drive *d, int trackno, int *lba, int *nwa) { struct buffer buf; struct command c; unsigned char *data; mmc_function_spy("mmc_get_nwa"); c.retry = 1; c.oplen = sizeof(MMC_TRACK_INFO); memcpy(c.opcode, MMC_TRACK_INFO, sizeof(MMC_TRACK_INFO)); c.opcode[1] = 1; if(trackno<=0) { if (d->current_profile == 0x1a) /* DVD+RW */ c.opcode[5] = 1; else /* mmc5r03c.pdf: valid only for CD, DVD+R, DVD+R DL */ c.opcode[5] = 0xFF; } else c.opcode[5] = trackno; c.page = &buf; c.dir = FROM_DRIVE; d->issue_command(d, &c); data = c.page->data; *lba = (data[8] << 24) + (data[9] << 16) + (data[10] << 8) + data[11]; *nwa = (data[12] << 24) + (data[13] << 16) + (data[14] << 8) + data[15]; if (d->current_profile == 0x1a) { /* DVD+RW */ *nwa = *nwa = 0; } else if (!(data[7]&1)) { /* ts A61106 : MMC-1 Table 142 : NWA_V = NWA Valid Flag */ libdax_msgs_submit(libdax_messenger, -1, 0x00000002, LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_ZERO, "mmc_get_nwa: Track Info Block: NWA_V == 0", 0, 0); return 0; } return 1; } /* ts A61009 : function is obviously unused. */ /* void mmc_close_disc(struct burn_drive *d, struct burn_write_opts *o) */ void mmc_close_disc(struct burn_write_opts *o) { struct burn_drive *d; mmc_function_spy("mmc_close_disc"); libdax_msgs_submit(libdax_messenger, -1, 0x00000002, LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_ZERO, "HOW THAT ? mmc_close_disc() was called", 0, 0); /* ts A61009 : made impossible by removing redundant parameter d */ /* a ssert(o->drive == d); */ d = o->drive; o->multi = 0; spc_select_write_params(d, o); mmc_close(d, 1, 0); } /* ts A61009 : function is obviously unused. */ /* void mmc_close_session(struct burn_drive *d, struct burn_write_opts *o) */ void mmc_close_session(struct burn_write_opts *o) { struct burn_drive *d; mmc_function_spy("mmc_close_session"); libdax_msgs_submit(libdax_messenger, -1, 0x00000002, LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_ZERO, "HOW THAT ? mmc_close_session() was called", 0, 0); /* ts A61009 : made impossible by removing redundant parameter d */ /* a ssert(o->drive == d); */ d = o->drive; o->multi = 3; spc_select_write_params(d, o); mmc_close(d, 1, 0); } void mmc_close(struct burn_drive *d, int session, int track) { struct command c; mmc_function_spy("mmc_close"); c.retry = 1; c.oplen = sizeof(MMC_CLOSE); memcpy(c.opcode, MMC_CLOSE, sizeof(MMC_CLOSE)); /* ts A61030 : shifted !!session rather than or-ing plain session */ c.opcode[2] = ((!!session)<<1) | !!track; c.opcode[4] = track >> 8; c.opcode[5] = track & 0xFF; c.page = NULL; c.dir = NO_TRANSFER; d->issue_command(d, &c); } void mmc_get_event(struct burn_drive *d) { struct buffer buf; struct command c; mmc_function_spy("mmc_get_event"); c.retry = 1; c.oplen = sizeof(MMC_GET_EVENT); memcpy(c.opcode, MMC_GET_EVENT, sizeof(MMC_GET_EVENT)); c.page = &buf; c.page->bytes = 0; c.page->sectors = 0; c.dir = FROM_DRIVE; d->issue_command(d, &c); burn_print(12, "0x%x:0x%x:0x%x:0x%x\n", c.page->data[0], c.page->data[1], c.page->data[2], c.page->data[3]); burn_print(12, "event: %d:%d:%d:%d\n", c.page->data[4], c.page->data[5], c.page->data[6], c.page->data[7]); } void mmc_write_12(struct burn_drive *d, int start, struct buffer *buf) { struct command c; int len; mmc_function_spy("mmc_write_12"); len = buf->sectors; /* ts A61009 */ /* a ssert(buf->bytes >= buf->sectors);*/ /* can be == at 0... */ burn_print(100, "trying to write %d at %d\n", len, start); memcpy(c.opcode, MMC_WRITE_12, sizeof(MMC_WRITE_12)); c.retry = 1; c.oplen = sizeof(MMC_WRITE_12); c.opcode[2] = start >> 24; c.opcode[3] = (start >> 16) & 0xFF; c.opcode[4] = (start >> 8) & 0xFF; c.opcode[5] = start & 0xFF; c.opcode[6] = len >> 24; c.opcode[7] = (len >> 16) & 0xFF; c.opcode[8] = (len >> 8) & 0xFF; c.opcode[9] = len & 0xFF; c.page = buf; c.dir = TO_DRIVE; d->issue_command(d, &c); } int mmc_write(struct burn_drive *d, int start, struct buffer *buf) { int cancelled; struct command c; int len; #ifdef Libburn_log_in_and_out_streaM /* <<< ts A61031 */ static int tee_fd= -1; if(tee_fd==-1) tee_fd= open("/tmp/libburn_sg_written", O_WRONLY|O_CREAT|O_TRUNC,S_IRUSR|S_IWUSR); #endif /* Libburn_log_in_and_out_streaM */ mmc_function_spy("mmc_write"); pthread_mutex_lock(&d->access_lock); cancelled = d->cancel; pthread_mutex_unlock(&d->access_lock); if (cancelled) return BE_CANCELLED; len = buf->sectors; /* ts A61009 : buffer fill problems are to be handled by caller */ /* a ssert(buf->bytes >= buf->sectors);*/ /* can be == at 0... */ burn_print(100, "trying to write %d at %d\n", len, start); memcpy(c.opcode, MMC_WRITE_10, sizeof(MMC_WRITE_10)); c.retry = 1; c.oplen = sizeof(MMC_WRITE_10); c.opcode[2] = start >> 24; c.opcode[3] = (start >> 16) & 0xFF; c.opcode[4] = (start >> 8) & 0xFF; c.opcode[5] = start & 0xFF; c.opcode[6] = 0; c.opcode[7] = (len >> 8) & 0xFF; c.opcode[8] = len & 0xFF; c.page = buf; c.dir = TO_DRIVE; /* burn_print(12, "%d, %d, %d, %d - ", c->opcode[2], c->opcode[3], c->opcode[4], c->opcode[5]); burn_print(12, "%d, %d, %d, %d\n", c->opcode[6], c->opcode[7], c->opcode[8], c->opcode[9]); */ #ifdef Libburn_log_in_and_out_streaM /* <<< ts A61031 */ if(tee_fd!=-1) { write(tee_fd,c.page->data,len*2048); } #endif /* Libburn_log_in_and_out_streaM */ d->issue_command(d, &c); /* ts A61112 : react on eventual error condition */ if (c.error && c.sense[2]!=0) { /* >>> make this scsi_notify_error() when liberated */ if (c.sense[2]!=0) { char msg[160]; sprintf(msg, "SCSI error on write(%d,%d): key=%X asc=%2.2Xh ascq=%2.2Xh", start, len, c.sense[2],c.sense[12],c.sense[13]); libdax_msgs_submit(libdax_messenger, d->global_index, 0x0002011d, LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH, msg, 0, 0); } pthread_mutex_lock(&d->access_lock); d->cancel = 1; pthread_mutex_unlock(&d->access_lock); return BE_CANCELLED; } return 0; } void mmc_read_toc(struct burn_drive *d) { /* read full toc, all sessions, in m/s/f form, 4k buffer */ struct burn_track *track; struct burn_session *session; struct buffer buf; struct command c; int dlen; int i, bpl= 12; unsigned char *tdata; mmc_function_spy("mmc_read_toc"); memcpy(c.opcode, MMC_GET_TOC, sizeof(MMC_GET_TOC)); c.retry = 1; c.oplen = sizeof(MMC_GET_TOC); c.page = &buf; c.page->bytes = 0; c.page->sectors = 0; c.dir = FROM_DRIVE; d->issue_command(d, &c); if (c.error) { /* ts A61020 : this snaps on non-blank DVD media */ /* ts A61106 : also snaps on CD with unclosed track/session */ /* Very unsure wether this old measure is ok. Obviously higher levels do not care about this. outdated info: DVD+RW burns go on after passing through here. d->busy = BURN_DRIVE_IDLE; */ libdax_msgs_submit(libdax_messenger, d->global_index, 0x0002010d, LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_HIGH, "Could not inquire TOC (non-blank DVD media ?)", 0,0); d->status = BURN_DISC_UNSUITABLE; d->toc_entries = 0; /* Prefering memory leaks over fandangos */ d->toc_entry = malloc(sizeof(struct burn_toc_entry)); return; } dlen = c.page->data[0] * 256 + c.page->data[1]; d->toc_entries = (dlen - 2) / 11; /* some drives fail this check. ts A61007 : if re-enabled then not via Assert. a ssert(((dlen - 2) % 11) == 0); */ d->toc_entry = malloc(d->toc_entries * sizeof(struct burn_toc_entry)); tdata = c.page->data + 4; burn_print(12, "TOC:\n"); d->disc = burn_disc_create(); for (i = 0; i < c.page->data[3]; i++) { session = burn_session_create(); burn_disc_add_session(d->disc, session, BURN_POS_END); burn_session_free(session); } /* ts A61022 */ burn_print(bpl, "-----------------------------------\n"); for (i = 0; i < d->toc_entries; i++, tdata += 11) { /* ts A61022: was burn_print level 12 */ burn_print(bpl, "S %d, PT %2.2Xh, TNO %d :", tdata[0],tdata[3], tdata[2]); burn_print(bpl, " MSF(%d:%d:%d)", tdata[4],tdata[5],tdata[6]); burn_print(bpl, " PMSF(%d:%d:%d %d)", tdata[8], tdata[9], tdata[10], burn_msf_to_lba(tdata[8], tdata[9], tdata[10]) ); burn_print(bpl, " - control %d, adr %d\n", tdata[1] & 0xF, tdata[1] >> 4); /* fprintf(stderr, "libburn_experimental: toc entry #%d : %d %d %d\n",i,tdata[8], tdata[9], tdata[10]); */ if (tdata[3] == 1) { if (burn_msf_to_lba(tdata[8], tdata[9], tdata[10])) { d->disc->session[0]->hidefirst = 1; track = burn_track_create(); burn_session_add_track(d->disc-> session[tdata[0] - 1], track, BURN_POS_END); burn_track_free(track); } } if (tdata[0] <= 0 || tdata[0] > d->disc->sessions) tdata[0] = d->disc->sessions; if (tdata[3] < 100 && tdata[0] > 0) { track = burn_track_create(); burn_session_add_track(d->disc->session[tdata[0] - 1], track, BURN_POS_END); track->entry = &d->toc_entry[i]; burn_track_free(track); } d->toc_entry[i].session = tdata[0]; d->toc_entry[i].adr = tdata[1] >> 4; d->toc_entry[i].control = tdata[1] & 0xF; d->toc_entry[i].tno = tdata[2]; d->toc_entry[i].point = tdata[3]; d->toc_entry[i].min = tdata[4]; d->toc_entry[i].sec = tdata[5]; d->toc_entry[i].frame = tdata[6]; d->toc_entry[i].zero = tdata[7]; d->toc_entry[i].pmin = tdata[8]; d->toc_entry[i].psec = tdata[9]; d->toc_entry[i].pframe = tdata[10]; if (tdata[3] == 0xA0) d->disc->session[tdata[0] - 1]->firsttrack = tdata[8]; if (tdata[3] == 0xA1) d->disc->session[tdata[0] - 1]->lasttrack = tdata[8]; if (tdata[3] == 0xA2) d->disc->session[tdata[0] - 1]->leadout_entry = &d->toc_entry[i]; } /* ts A61022 */ burn_print(bpl, "-----------------------------------\n"); if (d->status != BURN_DISC_APPENDABLE) d->status = BURN_DISC_FULL; toc_find_modes(d); } void mmc_read_disc_info(struct burn_drive *d) { struct buffer buf; unsigned char *data; struct command c; char msg[160]; /* ts A61020 */ d->start_lba = d->end_lba = -2000000000; d->erasable = 0; /* ts A61202 */ d->toc_entries = 0; if (d->status == BURN_DISC_EMPTY) return; mmc_get_configuration(d); if ((d->current_profile != 0 || d->status != BURN_DISC_UNREADY) && ! d->current_is_supported_profile) { if (!d->silent_on_scsi_error) { sprintf(msg, "Unsuitable media detected. Profile %4.4Xh %s", d->current_profile, d->current_profile_text); libdax_msgs_submit(libdax_messenger, d->global_index, 0x0002011e, LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH, msg, 0,0); } d->status = BURN_DISC_UNSUITABLE; return; } mmc_function_spy("mmc_read_disc_info"); memcpy(c.opcode, MMC_GET_DISC_INFO, sizeof(MMC_GET_DISC_INFO)); c.retry = 1; c.oplen = sizeof(MMC_GET_DISC_INFO); c.page = &buf; c.page->sectors = 0; c.page->bytes = 0; c.dir = FROM_DRIVE; d->issue_command(d, &c); if (c.error) { d->busy = BURN_DRIVE_IDLE; return; } data = c.page->data; d->erasable = !!(data[2] & 16); /* fprintf(stderr, "libburn_experimental: data[2]= %d 0x%x\n", (unsigned) data[2], (unsigned) data[2]); */ switch (data[2] & 3) { case 0: d->toc_entries = 0; d->start_lba = burn_msf_to_lba(data[17], data[18], data[19]); d->end_lba = burn_msf_to_lba(data[21], data[22], data[23]); /* fprintf(stderr, "libburn_experimental: start_lba = %d (%d %d %d) , end_lba = %d (%d %d %d)\n", d->start_lba, data[17], data[18], data[19], d->end_lba, data[21], data[22], data[23]); */ d->status = BURN_DISC_BLANK; break; case 1: d->status = BURN_DISC_APPENDABLE; case 2: if (d->current_profile == -1 || d->current_is_cd_profile) mmc_read_toc(d); break; } /* >>> ts A61217 : Note for future growisofs performs OPC if (data[0]<<8)|data[1]<=32 which indicates no OPC entries are attached to the reply from the drive. */ /* ts A61219 : mmc5r03c.pdf 6.22.3.1.13 BG Format Status 0=blank (not yet started) 1=started but neither running nor complete 2=in progress 3=completed */ d->bg_format_status = data[7] & 3; /* <<< ts A61219 : preliminarily declare all DVD+RW blank, (which is not the same as bg_format_status==0 "blank") */ if (d->current_profile == 0x1a) d->status = BURN_DISC_BLANK; } void mmc_read_atip(struct burn_drive *d) { struct buffer buf; struct command c; /* ts A61021 */ unsigned char *data; /* Speed values from A1: With 4 cdrecord tells "10" or "8" where MMC-1 says "8". cdrecord "8" appear on 4xCD-RW and thus seem to be quite invalid. My CD-R (>=24 speed) tell no A1. The higher non-MMC-1 values are hearsay. */ static int speed_value[16]= { 0, 2, 4, 6, 10, -5, 16, -7, 24, 32, 40, 48, -12, -13, -14, -15}; mmc_function_spy("mmc_read_atip"); memcpy(c.opcode, MMC_GET_ATIP, sizeof(MMC_GET_ATIP)); c.retry = 1; c.oplen = sizeof(MMC_GET_ATIP); c.page = &buf; c.page->bytes = 0; c.page->sectors = 0; c.dir = FROM_DRIVE; d->issue_command(d, &c); burn_print(1, "atip shit for you\n"); /* ts A61021 */ data = c.page->data; d->erasable= !!(data[6]&64); d->start_lba= burn_msf_to_lba(data[8],data[9],data[10]); d->end_lba= burn_msf_to_lba(data[12],data[13],data[14]); if (data[6]&4) { if (speed_value[(data[16]>>4)&7] > 0) d->mdata->min_write_speed = speed_value[(data[16]>>4)&7]*176; if (speed_value[(data[16])&15] > 0) d->mdata->max_write_speed = speed_value[(data[16])&15]*176; } #ifdef Burn_mmc_be_verbous_about_atiP { int i; fprintf(stderr,"libburn_experimental: Returned ATIP Data\n"); for(i= 0; i<28; i++) fprintf(stderr,"%3.3d (0x%2.2x)%s", data[i],data[i],((i+1)%5 ? " ":"\n")); fprintf(stderr,"\n"); fprintf(stderr, "libburn_experimental: Indicative Target Writing Power= %d\n", (data[4]>>4)&7); fprintf(stderr, "libburn_experimental: Reference speed= %d ->%d\n", data[4]&7, speed_value[data[4]&7]); fprintf(stderr, "libburn_experimental: Is %sunrestricted\n", (data[5]&64?"":"not ")); fprintf(stderr, "libburn_experimental: Is %serasable, sub-type %d\n", (data[6]&64?"":"not "),(data[6]>>3)&3); fprintf(stderr, "libburn_experimental: lead in: %d (%-2.2d:%-2.2d/%-2.2d)\n", burn_msf_to_lba(data[8],data[9],data[10]), data[8],data[9],data[10]); fprintf(stderr, "libburn_experimental: lead out: %d (%-2.2d:%-2.2d/%-2.2d)\n", burn_msf_to_lba(data[12],data[13],data[14]), data[12],data[13],data[14]); if(data[6]&4) fprintf(stderr, "libburn_experimental: A1 speed low %d speed high %d\n", speed_value[(data[16]>>4)&7], speed_value[(data[16])&7]); if(data[6]&2) fprintf(stderr, "libburn_experimental: A2 speed low %d speed high %d\n", speed_value[(data[20]>>4)&7], speed_value[(data[20])&7]); if(data[6]&1) fprintf(stderr, "libburn_experimental: A3 speed low %d speed high %d\n", speed_value[(data[24]>>4)&7], speed_value[(data[24])&7]); } #endif /* Burn_mmc_be_verbous_about_atiP */ /* ts A61020 http://www.t10.org/ftp/t10/drafts/mmc/mmc-r10a.pdf , table 77 : 0 ATIP Data Length MSB 1 ATIP Data Length LSB 2 Reserved 3 Reserved 4 bit7=1, bit4-6="Indicative Target Writing Power", bit3=reserved , bit0-2="Reference speed" 5 bit7=0, bit6="URU" , bit0-5=reserved 6 bit7=1, bit6="Disc Type", bit3-4="Disc Sub-Type", bit2="A1", bit1="A2", bit0="A3" 7 reserved 8 ATIP Start Time of lead-in (Min) 9 ATIP Start Time of lead-in (Sec) 10 ATIP Start Time of lead-in (Frame) 11 reserved 12 ATIP Last Possible Start Time of lead-out (Min) 13 ATIP Last Possible Start Time of lead-out (Sec) 14 ATIP Last Possible Start Time of lead-out (Frame) 15 reserved 16 bit7=0, bit4-6="Lowest Usable CLV Recording speed" bit0-3="Highest Usable CLV Recording speed" 17 bit7=0, bit4-6="Power Multiplication Factor p", bit1-3="Target y value of the Modulation/Power function", bit0=reserved 18 bit7=1, bit4-6="Recommended Erase/Write Power Ratio (P(inf)/W(inf))" bit0-3=reserved 19 reserved 20-22 A2 Values 23 reserved 24-26 A3 Values 27 reserved Disc Type - zero indicates CD-R media; one indicates CD-RW media. Disc Sub-Type - shall be set to zero. A1 - when set to one, indicates that bytes 16-18 are valid. Lowest Usable CLV Recording Speed 000b Reserved 001b 2X 010b - 111b Reserved Highest CLV Recording Speeds 000b Reserved 001b 2X 010b 4X 011b 6X 100b 8X 101b - 111b Reserved MMC-3 seems to recommend MODE SENSE (5Ah) page 2Ah rather than A1, A2, A3. This page is loaded in libburn function spc_sense_caps() . Speed is given in kbytes/sec there. But i suspect this to be independent of media. So one would habe to associate the speed descriptor blocks with the ATIP media characteristics ? How ? */ } void mmc_read_sectors(struct burn_drive *d, int start, int len, const struct burn_read_opts *o, struct buffer *buf) { int temp; int errorblock, req; struct command c; mmc_function_spy("mmc_read_sectors"); /* ts A61009 : to be ensured by callers */ /* a ssert(len >= 0); */ /* if the drive isn't busy, why the hell are we here? */ /* ts A61006 : i second that question */ /* a ssert(d->busy); */ burn_print(12, "reading %d from %d\n", len, start); memcpy(c.opcode, MMC_READ_CD, sizeof(MMC_READ_CD)); c.retry = 1; c.oplen = sizeof(MMC_READ_CD); temp = start; c.opcode[5] = temp & 0xFF; temp >>= 8; c.opcode[4] = temp & 0xFF; temp >>= 8; c.opcode[3] = temp & 0xFF; temp >>= 8; c.opcode[2] = temp & 0xFF; c.opcode[8] = len & 0xFF; len >>= 8; c.opcode[7] = len & 0xFF; len >>= 8; c.opcode[6] = len & 0xFF; req = 0xF8; /* ts A61106 : LG GSA-4082B dislikes this. key=5h asc=24h ascq=00h if (d->busy == BURN_DRIVE_GRABBING || o->report_recovered_errors) req |= 2; */ c.opcode[10] = 0; /* always read the subcode, throw it away later, since we don't know what we're really reading */ if (d->busy == BURN_DRIVE_GRABBING || (o->subcodes_audio) || (o->subcodes_data)) c.opcode[10] = 1; c.opcode[9] = req; c.page = buf; c.dir = FROM_DRIVE; d->issue_command(d, &c); if (c.error) { burn_print(12, "got an error over here\n"); burn_print(12, "%d, %d, %d, %d\n", c.sense[3], c.sense[4], c.sense[5], c.sense[6]); errorblock = (c.sense[3] << 24) + (c.sense[4] << 16) + (c.sense[5] << 8) + c.sense[6]; c.page->sectors = errorblock - start + 1; burn_print(1, "error on block %d\n", errorblock); burn_print(12, "error on block %d\n", errorblock); burn_print(12, "returning %d sectors\n", c.page->sectors); } } void mmc_erase(struct burn_drive *d, int fast) { struct command c; mmc_function_spy("mmc_erase"); memcpy(c.opcode, MMC_ERASE, sizeof(MMC_ERASE)); c.opcode[1] = 16; /* IMMED set to 1 */ c.opcode[1] |= !!fast; c.retry = 1; c.oplen = sizeof(MMC_ERASE); c.page = NULL; c.dir = NO_TRANSFER; d->issue_command(d, &c); } void mmc_read_lead_in(struct burn_drive *d, struct buffer *buf) { int len; struct command c; mmc_function_spy("mmc_read_lead_in"); len = buf->sectors; memcpy(c.opcode, MMC_READ_CD, sizeof(MMC_READ_CD)); c.retry = 1; c.oplen = sizeof(MMC_READ_CD); c.opcode[5] = 0; c.opcode[4] = 0; c.opcode[3] = 0; c.opcode[2] = 0xF0; c.opcode[8] = 1; c.opcode[7] = 0; c.opcode[6] = 0; c.opcode[9] = 0; c.opcode[10] = 2; c.page = buf; c.dir = FROM_DRIVE; d->issue_command(d, &c); } void mmc_perform_opc(struct burn_drive *d) { struct command c; mmc_function_spy("mmc_perform_opc"); memcpy(c.opcode, MMC_SEND_OPC, sizeof(MMC_SEND_OPC)); c.retry = 1; c.oplen = sizeof(MMC_SEND_OPC); c.opcode[1] = 1; c.page = NULL; c.dir = NO_TRANSFER; d->issue_command(d, &c); } void mmc_set_speed(struct burn_drive *d, int r, int w) { struct command c; /* ts A61112 : MMC standards prescribe FFFFh as max speed. But libburn.h prescribes 0. */ if (r<=0 || r>0xffff) r = 0xffff; if (w<=0 || w>0xffff) w = 0xffff; mmc_function_spy("mmc_set_speed"); memcpy(c.opcode, MMC_SET_SPEED, sizeof(MMC_SET_SPEED)); c.retry = 1; c.oplen = sizeof(MMC_SET_SPEED); c.opcode[2] = r >> 8; c.opcode[3] = r & 0xFF; c.opcode[4] = w >> 8; c.opcode[5] = w & 0xFF; c.page = NULL; c.dir = NO_TRANSFER; d->issue_command(d, &c); } /* ts A61201 */ static char *mmc_obtain_profile_name(int profile_number) { static char *texts[0x53] = {NULL}; int i, max_pno = 0x53; if (texts[0] == NULL) { for (i = 0; i=max_pno) return ""; return texts[profile_number]; } /* ts A61201 : found in unfunctional state */ void mmc_get_configuration(struct burn_drive *d) { struct buffer buf; int len, cp; struct command c; d->current_profile = 0; d->current_profile_text[0] = 0; d->current_is_cd_profile = 0; d->current_is_supported_profile = 0; mmc_function_spy("mmc_get_configuration"); memcpy(c.opcode, MMC_GET_CONFIGURATION, sizeof(MMC_GET_CONFIGURATION)); c.retry = 1; c.oplen = sizeof(MMC_GET_CONFIGURATION); c.page = &buf; c.page->sectors = 0; c.page->bytes = 0; c.dir = FROM_DRIVE; d->issue_command(d, &c); if (c.error) return; len = (c.page->data[0] << 24) + (c.page->data[1] << 16) + (c.page->data[2] << 8) + c.page->data[3]; if (len<8) return; cp = (c.page->data[6]<<8) | c.page->data[7]; d->current_profile = cp; strcpy(d->current_profile_text, mmc_obtain_profile_name(cp)); if (cp == 0x08 || cp == 0x09 || cp == 0x0a) d->current_is_supported_profile = d->current_is_cd_profile = 1; #ifdef Libburn_support_dvd_plus_rW if (cp == 0x1a) d->current_is_supported_profile = 1; #endif } void mmc_sync_cache(struct burn_drive *d) { struct command c; mmc_function_spy("mmc_sync_cache"); memcpy(c.opcode, MMC_SYNC_CACHE, sizeof(MMC_SYNC_CACHE)); c.retry = 1; c.oplen = sizeof(MMC_SYNC_CACHE); c.page = NULL; c.dir = NO_TRANSFER; d->issue_command(d, &c); } /* ts A61023 : http://libburn.pykix.org/ticket/14 get size and free space of drive buffer */ int mmc_read_buffer_capacity(struct burn_drive *d) { struct buffer buf; struct command c; unsigned char *data; mmc_function_spy("mmc_read_buffer_capacity"); memcpy(c.opcode, MMC_READ_BUFFER_CAPACITY, sizeof(MMC_READ_BUFFER_CAPACITY)); c.retry = 1; c.oplen = sizeof(MMC_READ_BUFFER_CAPACITY); c.page = &buf; c.page->bytes = 0; c.page->sectors = 0; c.dir = FROM_DRIVE; d->issue_command(d, &c); /* >>> ??? error diagnostics */ data = c.page->data; d->progress.buffer_capacity = (data[4]<<24)|(data[5]<<16)|(data[6]<<8)|data[7]; d->progress.buffer_available = (data[8]<<24)|(data[9]<<16)|(data[10]<<8)|data[11]; if (d->progress.buffered_bytes >= d->progress.buffer_capacity){ double fill; fill = d->progress.buffer_capacity - d->progress.buffer_available; if (fill < d->progress.buffer_min_fill && fill>=0) d->progress.buffer_min_fill = fill; } return 1; } /* ts A61219 : learned much from dvd+rw-tools-7.0: plus_rw_format() */ int mmc_format_unit(struct burn_drive *d) { struct buffer buf; struct command c; int ret; char msg[160],descr[80]; mmc_function_spy("mmc_format_unit"); c.retry = 1; c.oplen = sizeof(MMC_FORMAT_UNIT); memcpy(c.opcode, MMC_FORMAT_UNIT, sizeof(MMC_FORMAT_UNIT)); c.page = &buf; c.page->bytes = 12; c.page->sectors = 0; c.dir = TO_DRIVE; memset(c.page->data, 0, c.page->bytes); descr[0] = 0; if (d->current_profile == 0x1a) { /* DVD+RW */ c.page->data[1] = 0x02; /* Immed */ c.page->data[3] = 8; /* Format descriptor length */ /* mmc5r03c.pdf , 6.5.4.2.14 */ c.page->data[8] = 0x26 << 2; /* Format type */ memset(c.page->data + 4, 0xff, 4); /* maximum blocksize */ if (d->bg_format_status == 1) /* is partly formatted */ c.page->data[11] = 1; /* Restart bit */ else if(d->bg_format_status == 2) { /* format in progress */ strcpy(msg,"FORMAT UNIT ignored. Already in progress"); libdax_msgs_submit(libdax_messenger, d->global_index, 0x00020120, LIBDAX_MSGS_SEV_NOTE, LIBDAX_MSGS_PRIO_HIGH, msg, 0,0); } sprintf(descr, "DVD+RW, BGFS %d", d->bg_format_status); } else { /* >>> other formattable types to come */ sprintf(msg, "Unsuitable media detected. Profile %4.4Xh %s", d->current_profile, d->current_profile_text); libdax_msgs_submit(libdax_messenger, d->global_index, 0x0002011e, LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH, msg, 0,0); return 0; } d->issue_command(d, &c); if (c.error) { if (c.sense[2]!=0) { sprintf(msg, "SCSI error on format_unit(%s): key=%X asc=%2.2Xh ascq=%2.2Xh", descr, c.sense[2],c.sense[12],c.sense[13]); libdax_msgs_submit(libdax_messenger, d->global_index, 0x00020122, LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH, msg, 0, 0); } return 0; } for (ret = 0; ret <= 0 ;) ret = spc_test_unit_ready(d); mmc_sync_cache(d); return 1; } /* ts A61021 : the mmc specific part of sg.c:enumerate_common() */ int mmc_setup_drive(struct burn_drive *d) { d->read_atip = mmc_read_atip; d->read_toc = mmc_read_toc; d->write = mmc_write; d->erase = mmc_erase; d->read_sectors = mmc_read_sectors; d->perform_opc = mmc_perform_opc; d->set_speed = mmc_set_speed; d->send_cue_sheet = mmc_send_cue_sheet; d->sync_cache = mmc_sync_cache; d->get_nwa = mmc_get_nwa; d->close_disc = mmc_close_disc; d->close_session = mmc_close_session; d->close_track_session = mmc_close; d->read_buffer_capacity = mmc_read_buffer_capacity; d->format_unit = mmc_format_unit; /* ts A61020 */ d->start_lba = -2000000000; d->end_lba = -2000000000; /* ts A61201 */ d->erasable = 0; d->current_profile = -1; d->current_profile_text[0] = 0; d->current_is_cd_profile = 0; d->current_is_supported_profile = 0; d->bg_format_status = -1; return 1; }