/* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */ /* Copyright (c) 2010 Thomas Schmitt Provided under GPL version 2 or later. */ /* This is the main operating system dependent SCSI part of libburn. It implements the transport level aspects of SCSI control and command i/o. Present implementation: GNU libcdio , for X/Open compliant operating systems PORTING: Porting libburn typically will consist of adding a new operating system case to the following switcher files: os.h Operating system specific libburn definitions and declarations. sg.c Operating system dependent transport level modules. and of deriving the following system specific files from existing examples: os-*.h Included by os.h. You will need some general system knowledge about signals and knowledge about the storage object needs of your transport level module sg-*.c. sg-*.c This source module. You will need special system knowledge about how to detect all potentially available drives, how to open them, eventually how to exclusively reserve them, how to perform SCSI transactions, how to inquire the (pseudo-)SCSI driver. You will not need to care about CD burning, MMC or other high-level SCSI aspects. Said sg-*.c operations are defined by a public function interface, which has to be implemented in a way that provides libburn with the desired services: sg_id_string() returns an id string of the SCSI transport adapter. It may be called before initialization but then may return only a preliminary id. sg_initialize() performs global initialization of the SCSI transport adapter and eventually needed operating system facilities. Checks for compatibility of supporting software components. sg_shutdown() performs global finalizations and releases golbally aquired resources. sg_give_next_adr() iterates over the set of potentially useful drive address strings. scsi_enumerate_drives() brings all available, not-whitelist-banned, and accessible drives into libburn's list of drives. sg_dispose_drive() finalizes adapter specifics of struct burn_drive on destruction. Releases resources which were aquired underneath scsi_enumerate_drives(). sg_drive_is_open() tells wether libburn has the given drive in use. sg_grab() opens the drive for SCSI commands and ensures undisturbed access. sg_release() closes a drive opened by sg_grab() sg_issue_command() sends a SCSI command to the drive, receives reply, and evaluates wether the command succeeded or shall be retried or finally failed. sg_obtain_scsi_adr() tries to obtain SCSI address parameters. burn_os_is_2k_seekrw() tells whether the given path leads to a file object that can be used in 2 kB granularity by lseek(2), read(2), and possibly write(2) if not read-only.. E.g. a USB stick or a hard disk. burn_os_stdio_capacity() estimates the emulated media space of stdio-drives. burn_os_open_track_src() opens a disk file in a way that allows best throughput with file reading and/or SCSI write command transmission. burn_os_alloc_buffer() allocates a memory area that is suitable for file descriptors issued by burn_os_open_track_src(). The buffer size may be rounded up for alignment reasons. burn_os_free_buffer() delete a buffer obtained by burn_os_alloc_buffer(). Porting hints are marked by the text "PORTING:". Send feedback to libburn-hackers@pykix.org . */ #ifdef HAVE_CONFIG_H #include "../config.h" #endif /** PORTING : ------- OS dependent headers and definitions ------ */ #include #include #include #include #include #include #include #include #ifdef Libburn_os_has_statvfS #include #endif /* Libburn_os_has_stavtfS */ #ifdef __linux /* for ioctl(BLKGETSIZE) */ #include #include #endif #ifdef __FreeBSD__ #define Libburn_is_on_freebsD 1 #endif #ifdef __FreeBSD_kernel__ #define Libburn_is_on_freebsD 1 #endif #ifdef Libburn_is_on_freebsD /* To avoid ATAPI devices */ #define Libburn_guess_freebsd_atapi_devicE 1 /* To obtain size of disk-like devices */ #include /* DIOCGMEDIASIZE */ #endif /* Libburn_is_on_freebsD */ #define Libburn_guess_freebsd_atapi_devicE 1 #ifdef sun #define Libburn_is_on_solariS 1 #endif #ifdef __sun #define Libburn_is_on_solariS 1 #endif #include #include #include /* The waiting time before eventually retrying a failed SCSI command. Before each retry wait Libburn_sg_linux_retry_incR longer than with the previous one. */ #define Libburn_sg_libcdio_retry_usleeP 100000 #define Libburn_sg_libcdio_retry_incR 100000 /** PORTING : ------ libburn portable headers and definitions ----- */ #include "transport.h" #include "drive.h" #include "sg.h" #include "spc.h" /* collides with symbols of #include "mmc.h" */ #include "sbc.h" #include "debug.h" #include "toc.h" #include "util.h" #include "libdax_msgs.h" extern struct libdax_msgs *libdax_messenger; /* is in portable part of libburn */ int burn_drive_is_banned(char *device_address); int burn_drive_resolve_link(char *path, char adr[], int *recursion_count, int flag); /* drive.c */ /* Whether to log SCSI commands: bit0= log in /tmp/libburn_sg_command_log bit1= log to stderr bit2= flush every line */ extern int burn_sg_log_scsi; /* ------------------------------------------------------------------------ */ /* PORTING: Private definitions. Port only if needed by public functions. */ /* (Public functions are listed below) */ /* ------------------------------------------------------------------------ */ /* Storage object is in libburn/init.c whether to strive for exclusive access to the drive */ extern int burn_sg_open_o_excl; /* ------------------------------------------------------------------------ */ /* PORTING: Private functions. Port only if needed by public functions */ /* (Public functions are listed below) */ /* ------------------------------------------------------------------------ */ static int sg_close_drive(struct burn_drive * d) { CdIo_t *p_cdio; if (d->p_cdio != NULL) { p_cdio = (CdIo_t *) d->p_cdio; cdio_destroy(p_cdio); d->p_cdio = NULL; } return 0; } static int sg_give_next_adr_raw(burn_drive_enumerator_t *idx, char adr[], int adr_size, int initialize) { char **pos; int count = 0; if (initialize == 1) { idx->pos = idx->ppsz_cd_drives = cdio_get_devices(DRIVER_DEVICE); if (idx->ppsz_cd_drives == NULL) return 0; for (pos = idx->ppsz_cd_drives ; pos != NULL; pos++) { if (*pos == NULL) break; count++; } } else if (initialize == -1) { if (idx->ppsz_cd_drives != NULL) if (*(idx->ppsz_cd_drives) != NULL) cdio_free_device_list(idx->ppsz_cd_drives); idx->ppsz_cd_drives = NULL; } #ifdef Libburn_guess_freebsd_atapi_devicE try_next:; #endif if (idx->pos == NULL) return 0; if (*(idx->pos) == NULL) return 0; #ifdef Libburn_guess_freebsd_atapi_devicE if (strncmp(*(idx->pos), "/dev/acd", 8) == 0) { (idx->pos)++; goto try_next; } #endif if (strlen(*(idx->pos)) >= adr_size) return -1; strcpy(adr, *(idx->pos)); (idx->pos)++; return 1; } /* ----------------------------------------------------------------------- */ /* PORTING: Private functions which contain publicly needed functionality. */ /* Their portable part must be performed. So it is probably best */ /* to replace the non-portable part and to call these functions */ /* in your port, too. */ /* ----------------------------------------------------------------------- */ /** Wraps a detected drive into libburn structures and hands it over to libburn drive list. */ static void enumerate_common(char *fname, char *cdio_name, int bus_no, int host_no, int channel_no, int target_no, int lun_no) { int ret; struct burn_drive out; /* General libburn drive setup */ burn_setup_drive(&out, fname); /* This transport adapter uses SCSI-family commands and models (seems the adapter would know better than its boss, if ever) */ ret = burn_scsi_setup_drive(&out, bus_no, host_no, channel_no, target_no, lun_no, 0); if (ret <= 0) return; /* PORTING: ------------------- non portable part --------------- */ /* Transport adapter is libcdio */ /* Adapter specific handles and data */ out.p_cdio = NULL; strcpy(out.libcdio_name, fname); if (strlen(cdio_name) < sizeof(out.libcdio_name)) strcpy(out.libcdio_name, cdio_name); /* PORTING: ---------------- end of non portable part ------------ */ /* Adapter specific functions with standardized names */ out.grab = sg_grab; out.release = sg_release; out.drive_is_open = sg_drive_is_open; out.issue_command = sg_issue_command; /* Finally register drive and inquire drive information */ burn_drive_finish_enum(&out); } /* ------------------------------------------------------------------------ */ /* PORTING: Public functions. These MUST be ported. */ /* ------------------------------------------------------------------------ */ /** Returns the id string of the SCSI transport adapter and eventually needed operating system facilities. This call is usable even if sg_initialize() was not called yet. In that case a preliminary constant message might be issued if detailed info is not available yet. @param msg returns id string @param flag unused yet, submit 0 @return 1 = success, <=0 = failure */ int sg_id_string(char msg[1024], int flag) { char *version_text; sprintf(msg, "sg-libcdio h%d with libcdio ", LIBCDIO_VERSION_NUM); #if LIBCDIO_VERSION_NUM < 83 LIBBURN_MISCONFIGURATION = 0; INTENTIONAL_ABORT_OF_COMPILATION__HEADERFILE_cdio_version_dot_h_TOO_OLD__NEED_libcdio_VERSION_NUM_83 = 0; LIBBURN_MISCONFIGURATION_ = 0; #endif /* LIBCDIO_VERSION_NUM < 83 */ version_text = (char *) cdio_version_string; strncat(msg, version_text, 800); return 1; } /** Performs global initialization of the SCSI transport adapter and eventually needed operating system facilities. Checks for compatibility of supporting software components. @param msg returns ids and/or error messages of eventual helpers @param flag unused yet, submit 0 @return 1 = success, <=0 = failure */ int sg_initialize(char msg[1024], int flag) { int cdio_ver; char *msg_pt; cdio_loglevel_default = CDIO_LOG_ASSERT; msg[0] = 0; sg_id_string(msg, 0); cdio_ver = libcdio_version_num; libdax_msgs_submit(libdax_messenger, -1, 0x00000002, LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_HIGH, msg , 0, 0); if (cdio_ver < LIBCDIO_VERSION_NUM) { strcat(msg, " ---> "); msg_pt = msg + strlen(msg); sprintf(msg_pt, "libcdio TOO OLD: numeric version %d , need at least %d", cdio_ver, LIBCDIO_VERSION_NUM); libdax_msgs_submit(libdax_messenger, -1, 0x00000002, LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_HIGH, msg_pt, 0, 0); return 0; } return 1; } /** Performs global finalization of the SCSI transport adapter and eventually needed operating system facilities. Releases globally aquired resources. @param flag unused yet, submit 0 @return 1 = success, <=0 = failure */ int sg_shutdown(int flag) { return 1; } /** Finalizes BURN_OS_TRANSPORT_DRIVE_ELEMENTS, the components of struct burn_drive which are defined in os-*.h. The eventual initialization of those components was made underneath scsi_enumerate_drives(). This will be called when a burn_drive gets disposed. @param d the drive to be finalized @param flag unused yet, submit 0 @return 1 = success, <=0 = failure */ int sg_dispose_drive(struct burn_drive *d, int flag) { return 1; } /** Returns the next index number and the next enumerated drive address. The enumeration has to cover all available and accessible drives. It is allowed to return addresses of drives which are not available but under some (even exotic) circumstances could be available. It is on the other hand allowed, only to hand out addresses which can really be used right in the moment of this call. (This implementation chooses the latter.) @param idx An opaque handle. Make no own theories about it. @param adr Takes the reply @param adr_size Gives maximum size of reply including final 0 @param initialize 1 = start new, 0 = continue, use no other values for now -1 = finish @return 1 = reply is a valid address , 0 = no further address available -1 = severe error (e.g. adr_size too small) */ int sg_give_next_adr(burn_drive_enumerator_t *idx, char adr[], int adr_size, int initialize) { int ret, recursion_count = 0; char path[4096]; #ifdef Libburn_is_on_solariS int l; #endif ret = sg_give_next_adr_raw(idx, adr, adr_size, initialize); if (ret <= 0) return ret; if (strlen(adr) >= sizeof(path)) return ret; #ifdef Libburn_is_on_solariS /* >>> provisory : preserve Solaris /dev/rdsk/cXtYdZs2 addresses */ l = strlen(adr); if (l >= 18) if (strncmp(adr, "/dev/rdsk/c", 11) == 0 && adr[11] >= '0' && adr[11] <= '9' && strcmp(adr + (l - 2), "s2") == 0) return 1; #endif /* Libburn_is_on_solariS */ ret = burn_drive_resolve_link(adr, path, &recursion_count, 2); if(ret > 0 && strlen(path) < adr_size) strcpy(path, adr); return (ret >= 0); } /** Brings all available, not-whitelist-banned, and accessible drives into libburn's list of drives. */ int scsi_enumerate_drives(void) { burn_drive_enumerator_t idx; int initialize = 1, ret, i_bus_no = -1, recursion_count = 0; int i_host_no = -1, i_channel_no = -1, i_target_no = -1, i_lun_no = -1; char buf[4096], target[4096]; #ifdef Libburn_is_on_solariS int l; #endif while(1) { ret = sg_give_next_adr_raw(&idx, buf, sizeof(buf), initialize); initialize = 0; if (ret <= 0) break; ret = 1; #ifdef Libburn_is_on_solariS /* >>> provisory : preserve Solaris /dev/rdsk/cXtYdZs2 */ l = strlen(buf); if (l >= 18) if (strncmp(buf, "/dev/rdsk/c", 11) == 0 && buf[11] >= '0' && buf[11] <= '9' && strcmp(buf + (l - 2), "s2") == 0) ret = 0; #endif /* Libburn_is_on_solariS */ if (ret == 1) { ret = burn_drive_resolve_link(buf, target, &recursion_count,2); } if (ret <= 0) strcpy(target, buf); if (burn_drive_is_banned(target)) continue; sg_obtain_scsi_adr(buf, &i_bus_no, &i_host_no, &i_channel_no, &i_target_no, &i_lun_no); enumerate_common(target, buf, i_bus_no, i_host_no, i_channel_no, i_target_no, i_lun_no); } sg_give_next_adr(&idx, buf, sizeof(buf), -1); return 1; } /** Tells whether libburn has the given drive in use or exclusively reserved. If it is "open" then libburn will eventually call sg_release() on it when it is time to give up usage resp. reservation. */ /** Published as burn_drive.drive_is_open() */ int sg_drive_is_open(struct burn_drive * d) { return (d->p_cdio != NULL); } /** Opens the drive for SCSI commands and - if burn activities are prone to external interference on your system - obtains an exclusive access lock on the drive. (Note: this is not physical tray locking.) A drive that has been opened with sg_grab() will eventually be handed over to sg_release() for closing and unreserving. */ int sg_grab(struct burn_drive *d) { CdIo_t *p_cdio; char *am_eff, msg[4096], *am_wanted; int os_errno, second_try = 0; if (d->p_cdio != NULL) { d->released = 0; return 1; } if (d->libcdio_name[0] == 0) /* just to be sure it is initialized */ strcpy(d->libcdio_name, d->devname); am_wanted = (burn_sg_open_o_excl & 63) ? "MMC_RDWR_EXCL" : "MMC_RDWR"; try_to_open:; p_cdio = cdio_open_am(d->libcdio_name, DRIVER_DEVICE, am_wanted); if (p_cdio == NULL) { os_errno = errno; sprintf(msg, "Could not grab drive '%s'", d->devname); libdax_msgs_submit(libdax_messenger, d->global_index, 0x00020003, LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH, msg, os_errno, 0); return 0; } am_eff = (char *) cdio_get_arg(p_cdio, "access-mode"); if (strncmp(am_eff, "MMC_RDWR", 8) != 0) { cdio_destroy(p_cdio); if (!second_try) { am_wanted = (burn_sg_open_o_excl & 63) ? "MMC_RDWR" : "MMC_RDWR_EXCL"; second_try = 1; goto try_to_open; } libdax_msgs_submit(libdax_messenger, d->global_index, 0x00020003, LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH, "libcdio provides no MMC_RDWR access mode", 0, 0); return 0; } d->p_cdio = p_cdio; d->released = 0; return 1; } /** PORTING: Is mainly about the call to sg_close_drive() and whether it implements the demanded functionality. */ /** Gives up the drive for SCSI commands and releases eventual access locks. (Note: this is not physical tray locking.) */ int sg_release(struct burn_drive *d) { if (d->p_cdio == NULL) { burn_print(1, "release an ungrabbed drive. die\n"); return 0; } sg_close_drive(d); return 0; } #define Libburn_use_scsi_eval_cmd_outcomE yes /** Sends a SCSI command to the drive, receives reply and evaluates wether the command succeeded or shall be retried or finally failed. Returned SCSI errors shall not lead to a return value indicating failure. The callers get notified by c->error. An SCSI failure which leads not to a retry shall be notified via scsi_notify_error(). The Libburn_log_sg_commandS facility might be of help when problems with a drive have to be examined. It shall stay disabled for normal use. @return: 1 success , <=0 failure */ int sg_issue_command(struct burn_drive *d, struct command *c) { int sense_valid = 0, i, timeout_ms, no_retry = 0; int key = 0, asc = 0, ascq = 0, done = 0; time_t start_time; driver_return_code_t i_status; unsigned int dxfer_len; static FILE *fp = NULL; mmc_cdb_t cdb = {{0, }}; cdio_mmc_direction_t e_direction; CdIo_t *p_cdio; unsigned char *sense_pt = NULL; #ifndef Libburn_use_scsi_eval_cmd_outcomE int usleep_time; #endif c->error = 0; if (d->p_cdio == NULL) { return 0; } p_cdio = (CdIo_t *) d->p_cdio; if (burn_sg_log_scsi & 1) { if (fp == NULL) { fp= fopen("/tmp/libburn_sg_command_log", "a"); fprintf(fp, "\n-----------------------------------------\n"); } } if (burn_sg_log_scsi & 3) scsi_log_cmd(c,fp,0); memcpy(cdb.field, c->opcode, c->oplen); if (c->dir == TO_DRIVE) { dxfer_len = c->page->bytes; e_direction = SCSI_MMC_DATA_WRITE; } else if (c->dir == FROM_DRIVE) { if (c->dxfer_len >= 0) dxfer_len = c->dxfer_len; else dxfer_len = BUFFER_SIZE; e_direction = SCSI_MMC_DATA_READ; /* touch page so we can use valgrind */ memset(c->page->data, 0, BUFFER_SIZE); } else { dxfer_len = 0; e_direction = SCSI_MMC_DATA_NONE; } /* retry-loop */ start_time = time(NULL); timeout_ms = 200000; for(i = 0; !done; i++) { i_status = mmc_run_cmd(p_cdio, timeout_ms, &cdb, e_direction, dxfer_len, c->page->data); sense_valid = mmc_last_cmd_sense(p_cdio, &sense_pt); if (sense_valid >= 18) { memcpy(c->sense, sense_pt, sense_valid >= sizeof(c->sense) ? sizeof(c->sense) : sense_valid ); spc_decode_sense(c->sense, 0, &key, &asc, &ascq); } else key = asc = ascq = 0; if (sense_pt != NULL) free(sense_pt); /* Regrettably mmc_run_cmd() does not clearly distinguish between transport failure and SCSI error reply. This reaction here would be for transport failure: if (i_status != 0 && i_status != DRIVER_OP_ERROR) { libdax_msgs_submit(libdax_messenger, d->global_index, 0x0002010c, LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH, "Failed to transfer command to drive", errno, 0); sg_close_drive(d); d->released = 1; d->busy = BURN_DRIVE_IDLE; c->error = 1; return -1; } */ if ((!sense_valid) || (key == 0 && asc == 0 && ascq == 0)) { memset(c->sense, 0, sizeof(c->sense)); if (i_status != 0) { /* set dummy sense */ /*LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE*/ c->sense[0] = 0x70; /*Fixed format sense data*/ c->sense[2] = 0x02; c->sense[12] = 0x04; no_retry = 1; } } if (i_status != 0 || (key || asc || ascq)) { #ifdef Libburn_use_scsi_eval_cmd_outcomE done = scsi_eval_cmd_outcome(d, c, fp, c->sense, 18, 0, start_time, timeout_ms, i, 2); #else /* Libburn_use_scsi_eval_cmd_outcomE */ if (no_retry || !c->retry) { c->error = 1; goto ex; } switch (scsi_error(d, c->sense, 18)) { case RETRY: if (burn_sg_log_scsi & 3) { /* >>> Need own duration time measurement. Then remove bit1 */ scsi_log_err(c, fp, c->sense, 18, 0, 1 | 2); scsi_log_cmd(c,fp,0); } break; case FAIL: c->error = 1; goto ex; case GO_ON: if (burn_sg_log_scsi & 3) /* >>> Need own duration time measurement. Then remove bit1 */ scsi_log_err(c, fp, c->sense, 18, 0, 1 | 2); goto ex; } /* Calming down retries and breaking up endless cycle */ usleep_time = Libburn_sg_libcdio_retry_usleeP + i * Libburn_sg_libcdio_retry_incR; if (time(NULL) + usleep_time / 1000000 - start_time > timeout_ms / 1000 + 1) { c->error = 1; goto ex; } usleep(usleep_time); #endif /* ! Libburn_use_scsi_eval_cmd_outcomE */ } else done = 1; } /* end of retry-loop */ #ifndef Libburn_use_scsi_eval_cmd_outcomE ex:; if (c->error) scsi_notify_error(d, c, c->sense, 18, 0); if (burn_sg_log_scsi & 3) /* >>> Need own duration time measurement. Then remove bit1 */ scsi_log_err(c, fp, c->sense, 18, 0, (c->error != 0) | 2); #endif /* ! Libburn_use_scsi_eval_cmd_outcomE */ return 1; } /** Tries to obtain SCSI address parameters. @return 1 is success , 0 is failure */ int sg_obtain_scsi_adr(char *path, int *bus_no, int *host_no, int *channel_no, int *target_no, int *lun_no) { CdIo_t *p_cdio; char *tuple; *bus_no = *host_no = *channel_no = *target_no = *lun_no = -1; p_cdio = cdio_open(path, DRIVER_DEVICE); if (p_cdio == NULL) return 0; /* Try whether a bus,host,channel,target,lun address tuple is available */ tuple = (char *) cdio_get_arg(p_cdio, "scsi-tuple"); if (tuple != NULL) if (tuple[0]) { sscanf(tuple, "%d,%d,%d,%d,%d", bus_no, host_no, channel_no, target_no, lun_no); } cdio_destroy(p_cdio); return (*bus_no >= 0); } /** Tells wether a text is a persistent address as listed by the enumeration functions. */ int sg_is_enumerable_adr(char* adr) { burn_drive_enumerator_t idx; int initialize = 1, ret; char buf[64]; while(1) { ret = sg_give_next_adr(&idx, buf, sizeof(buf), initialize); initialize = 0; if (ret <= 0) break; if (strcmp(adr, buf) == 0) { sg_give_next_adr(&idx, buf, sizeof(buf), -1); return 1; } } sg_give_next_adr(&idx, buf, sizeof(buf), -1); return (0); } #ifdef __FreeBSD__ #define Libburn_guess_block_devicE 1 #endif #ifdef __FreeBSD_kernel__ #define Libburn_guess_block_devicE 1 #endif #ifdef Libburn_guess_block_devicE /* ts B00115 */ /* The FreeBSD implementation of burn_os_is_2k_seekrw(). On FreeBSD there are no block devices. */ static int freebsd_is_2k_seekrw(char *path, int flag) { struct stat stbuf; char *spt; int i, e; if (stat(path, &stbuf) == -1) return 0; if (S_ISREG(stbuf.st_mode)) return 1; if (!S_ISCHR(stbuf.st_mode)) return 0; spt = strrchr(path, '/'); if (spt == NULL) spt = path; else spt++; e = strlen(spt); for (i = strlen(spt) - 1; i > 0; i--) if (spt[i] >= '0' && spt[i] <= '9') e = i; if (strncmp(spt, "da", e) == 0) /* SCSI disk. E.g. USB stick. */ return 1; if (strncmp(spt, "cd", e) == 0) /* SCSI CD drive might be writeable. */ return 1; if (strncmp(spt, "ad", e) == 0) /* IDE hard drive */ return 1; if (strncmp(spt, "acd", e) == 0) /* IDE CD drive might be writeable */ return 1; if (strncmp(spt, "fd", e) == 0) /* Floppy disk */ return 1; if (strncmp(spt, "fla", e) == 0) /* Flash drive */ return 1; return 0; } #endif /* Libburn_guess_block_devicE */ /* Return 1 if the given path leads to a regular file or a device that can be seeked, read, and possibly written with 2 kB granularity. */ int burn_os_is_2k_seekrw(char *path, int flag) { #ifdef Libburn_guess_block_devicE return freebsd_is_2k_seekrw(path, flag); #else struct stat stbuf; if (stat(path, &stbuf) == -1) return 0; if (S_ISREG(stbuf.st_mode)) return 1; if (S_ISBLK(stbuf.st_mode)) return 1; return 0; #endif /* ! Libburn_guess_block_devicE */ } /** Estimate the potential payload capacity of a file address. @param path The address of the file to be examined. If it does not exist yet, then the directory will be inquired. @param bytes The pointed value gets modified, but only if an estimation is possible. @return -2 = cannot perform necessary operations on file object -1 = neither path nor dirname of path exist 0 = could not estimate size capacity of file object 1 = estimation has been made, bytes was set */ int burn_os_stdio_capacity(char *path, off_t *bytes) { struct stat stbuf; #ifdef Libburn_os_has_statvfS struct statvfs vfsbuf; #endif char testpath[4096], *cpt; long blocks; off_t add_size = 0; testpath[0] = 0; blocks = *bytes / 512; if (stat(path, &stbuf) == -1) { strcpy(testpath, path); cpt = strrchr(testpath, '/'); if(cpt == NULL) strcpy(testpath, "."); else if(cpt == testpath) testpath[1] = 0; else *cpt = 0; if (stat(testpath, &stbuf) == -1) return -1; #ifdef __linux /* GNU/Linux specific determination of block device size */ } else if(S_ISBLK(stbuf.st_mode)) { int open_mode = O_RDONLY, fd, ret; fd = open(path, open_mode); if (fd == -1) return -2; ret = ioctl(fd, BLKGETSIZE, &blocks); close(fd); if (ret == -1) return -2; *bytes = ((off_t) blocks) * (off_t) 512; #endif /* __linux */ #ifdef Libburn_is_on_freebsD } else if(S_ISCHR(stbuf.st_mode)) { int fd, ret; fd = open(path, O_RDONLY); if (fd == -1) return -2; ret = ioctl(fd, DIOCGMEDIASIZE, &add_size); close(fd); if (ret == -1) return -2; *bytes = add_size; #endif /* Libburn_is_on_freebsD */ #ifdef Libburn_is_on_solariS } else if(S_ISBLK(stbuf.st_mode)) { int open_mode = O_RDONLY, fd; fd = open(path, open_mode); if (fd == -1) return -2; *bytes = lseek(fd, 0, SEEK_END); close(fd); if (*bytes == -1) { *bytes = 0; return 0; } #endif /* Libburn_is_on_solariS */ } else if(S_ISREG(stbuf.st_mode)) { add_size = stbuf.st_blocks * (off_t) 512; strcpy(testpath, path); } else return 0; if (testpath[0]) { #ifdef Libburn_os_has_statvfS if (statvfs(testpath, &vfsbuf) == -1) return -2; *bytes = add_size + ((off_t) vfsbuf.f_frsize) * (off_t) vfsbuf.f_bavail; #else /* Libburn_os_has_statvfS */ return 0; #endif /* ! Libburn_os_has_stavtfS */ } return 1; } /* ts A91122 : an interface to open(O_DIRECT) or similar OS tricks. */ #ifdef Libburn_read_o_direcT /* No special O_DIRECT-like precautions are implemented here */ #endif /* Libburn_read_o_direcT */ int burn_os_open_track_src(char *path, int open_flags, int flag) { int fd; fd = open(path, open_flags); return fd; } void *burn_os_alloc_buffer(size_t amount, int flag) { void *buf = NULL; buf = calloc(1, amount); return buf; } int burn_os_free_buffer(void *buffer, size_t amount, int flag) { if (buffer == NULL) return 0; free(buffer); return 1; }