libisoburn/frontend/grub-mkrescue-sed.sh

440 lines
14 KiB
Bash
Raw Normal View History

#!/bin/sh
# Copyright (C) 2015 - 2022
# Thomas Schmitt <scdbackup@gmx.net>, libburnia-project.org
# Provided under BSD license: Use, modify, and distribute as you like.
echo >&2
echo "frontend/grub-mkrescue-sed.sh manipulating xorriso arguments" >&2
echo >&2
# This script may be handed by its absolute path to grub-mkrescue
# via option --xorriso= . E.g.
#
# mkdir minimal
# touch minimal/empty-file.txt
# grub-mkrescue -o output.iso minimal \
# --xorriso=/home/thomas/xorriso-1.4.3./frontend/grub-mkrescue-sed.sh
#
# It will manipulate the xorriso arguments before they get executed by a
# xorriso program. Default is the neighboring ../../xorriso/xorriso program or,
# if that neighbor cannot be found, the system-wide installed xorriso.
#
# The mode "mjg" implements a layout which resembles Fedora LiveCD and Debian
# ISOs which are bootable by ISOLINUX for BIOS and GRUB2 for EFI.
# Its GPT is considered to be surplus, according to UEFI specs.
#
# The mode "mbr_only" implements an alternative layout according to UEFI 2.4,
# section 2.5.1 and table 16. No GTP, HFS+, or APM.
# This mode produces a mountable ISO 9660 partition 1 only if variable
# MKRESCUE_SED_PROTECTIVE is empty or set to "no".
#
# The mode "mbr_hfs" is like "mbr_only" but with HFS+ mentioned in APM.
# It is still compliant to UEFI with no potentially deceiving GPT.
# If you add xorrisofs option -part_like_isohybrid then no gap fillig APM
# partition will emerge.
#
# Mode "gpt_appended" represents the same layout as "mbr_only" by GPT rather
# than by MBR partition table. It differs from "original" by the fact that
# option -partition_offset 16 is implied and that the first partition may
# be used to mount the ISO 9660 filesystem. MKRESCUE_SED_PROTECTIVE is ignored,
# because neat GPT is indicated by the existence of a Protective MBR.
#
# These modes avoid duplicate storing of the EFI system partition "efi.img"
# by xorrisofs option -e "--interval:appended_partition_${partno}:all::"
# which is new to xorriso-1.4.4.
# If "_copy" is appended to the mode name, then the file /efi.img will
# appear in the ISO 9660 filesystem and traditional -e "/efi.img" is used.
#
# "mbr_only_copy" is supposed to work with unmodified xorriso >= 1.3.2
#
# Variation settings
#
# The environment variables MKRESCUE_SED_* override the following
# default settings:
# Manipulation mode:
# "mjg" = ESP in MBR+GPT+APM, with HFS+
# "mbr_only" = ESP in MBR, without HFS+
# "mbr_hfs" = ESP in MBR, HFS+ in APM
# "gpt_appended" = ESP in GPT, without HFS+
# $mode"_copy" = one of above modes, ESP in ISO and as appended partition
# "original" = pass arguments unchanged
mode="mbr_only"
if test -n "$MKRESCUE_SED_MODE"
then
mode="$MKRESCUE_SED_MODE"
fi
# First argument of -append_partition with mode "mjg". Values: 1 or 2.
partno=1
if test -n "$MKRESCUE_SED_PARTNO"
then
partno="$MKRESCUE_SED_PARTNO"
fi
# Replacement for option --protective-msdos-label. Either itself or empty text.
# If the environment variable contains the word "no", this means empty.
protective=""
if test -n "$MKRESCUE_SED_PROTECTIVE"
then
if test x"$MKRESCUE_SED_PROTECTIVE" = xno
then
protective=""
elif test x"$MKRESCUE_SED_PROTECTIVE" = xyes
then
protective="--protective-msdos-label"
else
protective="$MKRESCUE_SED_PROTECTIVE"
fi
fi
# "yes" shows xorriso arguments, "extra" additionally shows all input files.
debug=no
if test -n "$MKRESCUE_SED_DEBUG"
then
debug="$MKRESCUE_SED_DEBUG"
fi
# The path to the program that will be executed with the converted arguments.
if test -n "$MKRESCUE_SED_XORRISO"
then
xorriso="$MKRESCUE_SED_XORRISO"
else
# Prefer neighboring xorriso binary over system-wide installed one.
self_dir="$(dirname $(dirname "$0") )"
if test -x "$self_dir"/xorriso/xorriso
then
xorriso="$self_dir"/xorriso/xorriso
else
xorriso="xorriso"
fi
fi
# MKRESCUE_SED_XORRISO_ARGS will be used as first arguments of the xorriso run.
# (Trailing xorriso arguments may be simply added to the grub-mkrescue
# command line.)
# Each argument must be a single word. No whitespace. No quotation marks.
# "yes" in MKRESCUE_SED_IN_EFI_NO_PT overwrites the MBR partition table area
# in the EFI boot image by zeros. Some EFI implementations get stuck when
# seeing in the EFI partition a partition table entry which begins at LBA 0.
# "extra" not only zeros the partition table but also the MBR signature.
efi_zero_inner_pt=no
if test -n "$MKRESCUE_SED_IN_EFI_NO_PT"
then
efi_zero_inner_pt="$MKRESCUE_SED_IN_EFI_NO_PT"
fi
# "yes" in MKRESCUE_SED_UNPACK_EFI_TO_ISO causes the file tree from the FAT
# image efi.img to be unpacked by mcopy to a directory in /tmp which then
# gets mapped into the root directory of the emerging ISO 9660 filesystem.
# This enables a way of installing the result image onto a USB stick with
# FAT filesystem by simply copying its full file tree from ISO to FAT.
# Whether the payload files of the ISO will be able to work from FAT depends
# on their expectation towards file names and attributes.
# WARNING: Make sure that the files in efi.img do not collide with your
# payload files or with files added to the ISO by GRUB. Before using
# MKRESCUE_SED_UNPACK_EFI_TO_ISO, make a vanilla grub-mkrescue ISO
# with your payload, mount it and then its /efi.img file, then use
# program "find" on the mount point of efi.img to see all its files.
# Compare this with the output of "find" on the ISO mount point.
efi_unpack_to_iso=no
if test -n "$MKRESCUE_SED_UNPACK_EFI_TO_ISO"
then
efi_unpack_to_iso="$MKRESCUE_SED_UNPACK_EFI_TO_ISO"
fi
#
# Do the work
#
# grub-mkrescue inquires features by running these arguments
if test "$*" = "-as mkisofs -help"
then
"$xorriso" "$@"
exit $?
fi
echo "frontend/grub-mkrescue-sed.sh mode: $mode" >&2
echo >&2
if test x"$debug" = xyes -o x"$debug" = xextra
then
# Show arguments
echo "##### Begin of received arguments" >&2
echo "$0" >&2
for i in "$@"
do
echo "$i" >&2
done
echo "##### End of received arguments" >&2
echo >&2
fi
# Check for option -iso_mbr_part_type which is new in 1.4.8
iso_mbr_part_type=
if "$xorriso" -as mkisofs -help 2>&1 | grep iso_mbr_part_type >/dev/null
then
iso_mbr_part_type="-iso_mbr_part_type 0x00"
fi
# Look for the name of the /tmp directory with the GRUB2 files.
# It is the next argument after -r. But as default accept any /tmp/grub.*
next_is_dir=0
dir="."
for i in "$@"
do
if test x"$i" = x"-r"
then
next_is_dir=1
elif test $next_is_dir = 1
then
next_is_dir=0
if echo "$i" | grep '^/tmp/grub.' >/dev/null 2>&1
then
test -d "$i" && dir="$i"
fi
elif test "$dir" = "."
then
if echo "$i" | grep '^/tmp/grub.' >/dev/null 2>&1
then
test -d "$i" && dir="$i"
fi
fi
done
if test x"$debug" = xextra
then
# Show files on disk
find "$dir" 2>&1
echo 2>&1
fi
if test x"$efi_zero_inner_pt" = xyes -o x"$efi_zero_inner_pt" = xextra
then
did_dd=0
if test -e "$dir"/efi.img
then
# Look for 0x55 0xAA in bytes 510 and 511
magic=$(dd bs=1 skip=510 count=2 if="$dir"/efi.img 2>/dev/null | \
od -c | head -1 | awk '{print $2 " " $3}')
if test "$magic" = "U 252"
then
echo "Performing actions for MKRESCUE_SED_IN_EFI_NO_PT=$efi_zero_inner_pt" >&2
dd if=/dev/zero bs=1 seek=446 count=64 conv=notrunc of="$dir"/efi.img
did_dd=1
if test "$efi_zero_inner_pt" = extra
then
dd if=/dev/zero bs=1 seek=510 count=2 conv=notrunc of="$dir"/efi.img
fi
echo >&2
fi
fi
if test "$did_dd" = 0
then
echo >&2
echo "$0 : NOTE : No EFI image found or no MBR signature in it." >&2
echo "$0 : NOTE : Will not obey MKRESCUE_SED_IN_EFI_NO_PT=$efi_zero_inner_pt" >&2
echo >&2
fi
fi
efi_temp_tree=
if test x"$efi_unpack_to_iso" = xyes
then
if test -e "$dir"/efi.img
then
temp_tree=/tmp/grub-mkrescue-sed-et."$$"
# The mcopy command is the inverse of what grub-mkrescue does to pack it up
if mcopy -s -i "$dir"/efi.img ::/ "$temp_tree"
then
efi_temp_tree="$temp_tree"
if test x"$debug" = xyes -o x"$debug" = xextra
then
echo "Temporarily extracted $dir/efi.img to $temp_tree" >&2
echo >&2
if test x"$debug" = xextra
then
# Show extracted files
find "$temp_tree" >&2
echo >&2
fi
fi
elif test -e "$temp_tree"
then
rm -r "$temp_tree"
fi
if test -z "$efi_temp_tree"
then
echo >&2
echo "$0 : NOTE : Could not extract efi.img to $temp_tree" >&2
echo "$0 : NOTE : Thus cannot obey MKRESCUE_SED_UNPACK_EFI_TO_ISO." >&2
echo >&2
fi
fi
fi
efi_tmp_name=
if test x"$mode" = xmjg \
-o x"$mode" = xmbr_only \
-o x"$mode" = xgpt_appended \
-o x"$mode" = xmbr_hfs
then
# Move EFI partition image file out of the "$dir" tree, i.e. out of the ISO
efi_tmp_name=grub-mkrescue-sed-ei.$$
if test -e "$dir"/efi.img
then
mv "$dir"/efi.img /tmp/$efi_tmp_name
if test x"$debug" = xyes -o x"$debug" = xextra
then
echo "Temporarily moved $dir/efi.img to /tmp/$efi_tmp_name" >&2
echo >&2
fi
elif test -e /tmp/$efi_tmp_name
then
rm /tmp/$efi_tmp_name
fi
fi
if test x"$mode" = xmjg
then
# Exchange arguments for the experimental GRUB2 mjg layout
x=$(echo " $*" | sed \
-e "s/-efi-boot-part --efi-boot-image/-no-pad -append_partition $partno 0xef \/tmp\/$efi_tmp_name/" \
-e "s/--efi-boot efi\.img/-eltorito-alt-boot -e --interval:appended_partition_${partno}:all:: -no-emul-boot -isohybrid-gpt-basdat/" \
-e "s/--protective-msdos-label/$protective -part_like_isohybrid/" \
)
elif test x"$mode" = xmjg_copy
then
# Exchange arguments for the experimental GRUB2 mjg layout
x=$(echo " $*" | sed \
-e "s/-efi-boot-part --efi-boot-image/-no-pad -append_partition $partno 0xef \/tmp\/$(basename "$dir")\/efi.img/" \
-e "s/--efi-boot efi\.img/-eltorito-alt-boot -e efi.img -no-emul-boot -isohybrid-gpt-basdat/" \
-e "s/--protective-msdos-label/$protective -part_like_isohybrid/" \
)
elif test x"$mode" = xmbr_only
then
# Exchange arguments for no-HFS MBR-only layout
x=$(echo " $*" | sed \
-e "s/-efi-boot-part --efi-boot-image/$iso_mbr_part_type -no-pad -append_partition 2 0xef \/tmp\/$efi_tmp_name/" \
-e "s/--efi-boot efi\.img/-eltorito-alt-boot -e --interval:appended_partition_2:all:: -no-emul-boot/" \
-e "s/-hfsplus .*CoreServices\/boot.efi//" \
-e "s/--protective-msdos-label/$protective/" \
)
elif test x"$mode" = xmbr_only_copy
then
# Exchange arguments for no-HFS MBR-only layout
x=$(echo " $*" | sed \
-e "s/-efi-boot-part --efi-boot-image/$iso_mbr_part_type -no-pad -append_partition 2 0xef \/tmp\/$(basename "$dir")\/efi.img/" \
-e "s/-hfsplus .*CoreServices\/boot.efi//" \
-e "s/--protective-msdos-label/$protective/" \
)
elif test x"$mode" = xmbr_hfs
then
# Exchange arguments for MBR and HFS+ layout
x=$(echo " $*" | sed \
-e "s/-efi-boot-part --efi-boot-image/$iso_mbr_part_type -no-pad -append_partition 2 0xef \/tmp\/$efi_tmp_name/" \
-e "s/--efi-boot efi\.img/-eltorito-alt-boot -e --interval:appended_partition_2:all:: -no-emul-boot/" \
-e "s/--protective-msdos-label/$protective/" \
)
elif test x"$mode" = xmbr_hfs_copy
then
# Exchange arguments for MBR and HFS+ layout
x=$(echo " $*" | sed \
-e "s/-efi-boot-part --efi-boot-image/$iso_mbr_part_type -no-pad -append_partition 2 0xef \/tmp\/$(basename "$dir")\/efi.img/" \
-e "s/--protective-msdos-label/$protective/" \
)
elif test x"$mode" = xgpt_appended
then
# Exchange arguments for no-HFS MBR-only layout
x=$(echo " $*" | sed \
-e "s/-efi-boot-part --efi-boot-image/-no-pad -append_partition 2 0xef \/tmp\/$efi_tmp_name -appended_part_as_gpt -partition_offset 16/" \
-e "s/--efi-boot efi\.img/-eltorito-alt-boot -e --interval:appended_partition_2:all:: -no-emul-boot/" \
-e "s/-hfsplus .*CoreServices\/boot.efi//" \
)
elif test x"$mode" = xgpt_appended_copy
then
# Exchange arguments for no-HFS MBR-only layout
x=$(echo " $*" | sed \
-e "s/-efi-boot-part --efi-boot-image/-no-pad -append_partition 2 0xef \/tmp\/$(basename "$dir")\/efi.img -appended_part_as_gpt -partition_offset 16/" \
-e "s/-hfsplus .*CoreServices\/boot.efi//" \
)
elif test x"$mode" = xoriginal
then
# Pass arguments unchanged
x=" $*"
else
echo >&2
echo "$0 : FATAL : Unknown manipulation mode '$mode'." >&2
echo >&2
exit 1
fi
if echo "$efi_temp_tree" | grep '^/tmp/' >/dev/null
then
# Does the xorriso run end in native command mode ?
separator_seen=0
for i in "$@"
do
if test x"$i" = x--
then
separator_seen=1
fi
done
if test "$separator_seen" = 1
then
# Native mode possible: Enable it for sure and then use -map
x=" $x -- -map $efi_temp_tree /"
else
# Hopefully nobody finds a way to leave mkisofs emulation without "--" arg
x=" $x -graft-points /=$efi_temp_tree"
fi
fi
if test x"$debug" = xyes -o x"$debug" = xextra
then
echo "+ converted xorriso arguments:" >&2
echo " $x" >&2
echo >&2
fi
# Run xorriso binary with the converted arguments
use_gdb=no
if test "$use_gdb" = yes
then
gdb_file=/tmp/grub-mkrescue-sed-gdb
echo b assess_appended_gpt >$gdb_file
echo run $MKRESCUE_SED_XORRISO_ARGS $x >>$gdb_file
gdb -x $gdb_file "$xorriso"
ret=0
else
"$xorriso" $MKRESCUE_SED_XORRISO_ARGS $x
ret=$?
fi
# Move back the ESP if it was separated
if test -n "$efi_tmp_name" -a -e /tmp/$efi_tmp_name
then
mv /tmp/$efi_tmp_name "$dir"/efi.img
fi
# Remove possible extracted EFI partition tree
if echo "$efi_temp_tree" | grep '^/tmp/' >/dev/null
then
rm -r "$efi_temp_tree"
fi
exit $ret