libisoburn/frontend/grub-mkrescue-sed.sh

261 lines
7.5 KiB
Bash
Executable File

#!/bin/sh
# Copyright (C) 2015
# Thomas Schmitt <scdbackup@gmx.net>, libburnia-project.org
# Provided under BSD license: Use, modify, and distribute as you like.
echo >&2
echo "frontend/grub-mkrescue-sed.sh manipulating xorriso arguments" >&2
echo >&2
# This script may be handed by its absolute path to grub-mkrescue
# via option --xorriso= . E.g.
#
# mkdir minimal
# touch minimal/empty-file.txt
# grub-mkrescue -o output.iso minimal \
# --xorriso=/home/thomas/xorriso-1.4.3./frontend/grub-mkrescue-sed.sh
#
# It will manipulate the xorriso arguments before they get executed by a
# xorriso program. Default is the neighboring ../../xorriso/xorriso program or,
# if that neighbor cannot be found, the system-wide installed xorriso.
#
# The mode "mjg" implements an experiment which should be accompanied by a
# GNU xorriso built by
# export CPPFLAGS="-DLibisofs_mjg_boot_for_grub2"
# ./configure && make clean && make
#
# The mode "mbr_only" implements an alternative layout according to UEFI 2.4,
# section 2.5.1 and table 16. No GTP, HFS+, or APM.
#
# The mode "mbr_hfs" is like "mbr_only" but with HFS+ mentioned in APM.
# It is still compliant to UEFI with no potentially deceiving GPT.
#
# These modes avoid duplicate storing of the EFI system partition "efi.img"
# by xorrisofs option -e "--interval:appended_partition_${partno}:all::"
# which is new to xorriso-1.4.3 with timestamp after 2015.12.30.175951.
# If "_copy" is appended to the mode name, then the file /efi.img will
# appear in the ISO 9660 filesystem and traditional -e "/efi.img" is used.
#
# "mbr_only_copy" is supposed to work with unmodified xorriso >= 1.3.2
#
# Variation settings
#
# The environment variables MKRESCUE_SED_* override the following
# default settings:
# Manipulation mode:
# "mjg" = ESP in MBR+GPT+APM, with HFS+
# "mbr_only" = ESP in MBR, without HFS+
# "mbr_hfs" = ESP in MBR, HFS+ in APM
# $mode"_copy" = one of above modes, ESP in ISO and as appended partition
# "original" = pass arguments unchanged
mode="mjg"
if test -n "$MKRESCUE_SED_MODE"
then
mode="$MKRESCUE_SED_MODE"
fi
# First argument of -append_partition with mode "mjg". Values: 1 or 2.
partno=1
if test -n "$MKRESCUE_SED_PARTNO"
then
partno="$MKRESCUE_SED_PARTNO"
fi
# Replacement for option --protective-msdos-label. Either itself or empty text.
# If the environment variable contains the word "no", this means empty.
protective="--protective-msdos-label"
if test -n "$MKRESCUE_SED_PROTECTIVE"
then
if test x"$MKRESCUE_SED_PROTECTIVE" = xno
then
protective=""
elif test x"$MKRESCUE_SED_PROTECTIVE" = xyes
then
protective="--protective-msdos-label"
else
protective="$MKRESCUE_SED_PROTECTIVE"
fi
fi
# "yes" shows xorriso arguments, "extra" additionally shows all input files.
debug=no
if test -n "$MKRESCUE_SED_DEBUG"
then
debug="$MKRESCUE_SED_DEBUG"
fi
# The path to the program that will be executed with the converted arguments.
if test -n "$MKRESCUE_SED_XORRISO"
then
xorriso="$MKRESCUE_SED_XORRISO"
else
# Prefer neighboring xorriso binary over system-wide installed one.
self_dir="$(dirname $(dirname "$0") )"
if test -x "$self_dir"/xorriso/xorriso
then
xorriso="$self_dir"/xorriso/xorriso
else
xorriso="xorriso"
fi
fi
# MKRESCUE_SED_XORRISO_ARGS will be used as first arguments of the xorriso run.
# (Trailing xorriso arguments may be simply added to the grub-mkrescue
# command line.)
# Each argument must be a single word. No whitespace. No quotation marks.
#
# Do the work
#
# grub-mkrescue inquires features by running these arguments
if test "$*" = "-as mkisofs -help"
then
"$xorriso" "$@"
exit $?
fi
echo "frontend/grub-mkrescue-sed.sh mode: $mode" >&2
echo >&2
if test x"$debug" = xyes -o x"$debug" = xextra
then
# Show arguments
echo "##### Begin of received arguments" >&2
echo "$0" >&2
for i in "$@"
do
echo "$i" >&2
done
echo "##### End of recived arguments" >&2
echo >&2
fi
# Look for the name of the /tmp directory with the GRUB2 files.
# It is the next argument after -r. But as default accept any /tmp/grub.*
next_is_dir=0
dir="."
for i in "$@"
do
if test x"$i" = x"-r"
then
next_is_dir=1
elif test $next_is_dir = 1
then
next_is_dir=0
if echo "$i" | grep '^/tmp/grub.' >/dev/null 2>&1
then
test -d "$i" && dir="$i"
fi
elif test "$dir" = "."
then
if echo "$i" | grep '^/tmp/grub.' >/dev/null 2>&1
then
test -d "$i" && dir="$i"
fi
fi
done
if test x"$debug" = xextra
then
# Show files on disk
find "$dir"
fi
efi_tmp_name=
if test x"$mode" = xmjg
then
# Exchange arguments for the experimental GRUB2 mjg layout
efi_tmp_name=grub-mkrescue-sed-efi-img.$$
mv "$dir"/efi.img /tmp/$efi_tmp_name
x=$(echo " $*" | sed \
-e "s/-efi-boot-part --efi-boot-image/-no-pad -append_partition $partno 0xef \/tmp\/$efi_tmp_name/" \
-e "s/--efi-boot efi\.img/-eltorito-alt-boot -e --interval:appended_partition_${partno}:all:: -no-emul-boot -isohybrid-gpt-basdat/" \
-e "s/--protective-msdos-label/$protective/" \
)
elif test x"$mode" = xmjg_copy
then
# Exchange arguments for the experimental GRUB2 mjg layout
x=$(echo " $*" | sed \
-e "s/-efi-boot-part --efi-boot-image/-no-pad -append_partition $partno 0xef \/tmp\/$(basename "$dir")\/efi.img/" \
-e "s/--efi-boot efi\.img/-eltorito-alt-boot -e efi.img -no-emul-boot -isohybrid-gpt-basdat/" \
-e "s/--protective-msdos-label/$protective/" \
)
elif test x"$mode" = xmbr_only
then
# Exchange arguments for no-HFS MBR-only layout
efi_tmp_name=grub-mkrescue-sed-efi-img.$$
mv "$dir"/efi.img /tmp/$efi_tmp_name
x=$(echo " $*" | sed \
-e "s/-efi-boot-part --efi-boot-image/-no-pad -append_partition 2 0xef \/tmp\/$efi_tmp_name/" \
-e "s/--efi-boot efi\.img/-eltorito-alt-boot -e --interval:appended_partition_2:all:: -no-emul-boot/" \
-e "s/-hfsplus .*CoreServices\/boot.efi//" \
-e "s/--protective-msdos-label/$protective/" \
)
elif test x"$mode" = xmbr_only_copy
then
# Exchange arguments for no-HFS MBR-only layout
x=$(echo " $*" | sed \
-e "s/-efi-boot-part --efi-boot-image/-no-pad -append_partition 2 0xef \/tmp\/$(basename "$dir")\/efi.img/" \
-e "s/-hfsplus .*CoreServices\/boot.efi//" \
-e "s/--protective-msdos-label/$protective/" \
)
elif test x"$mode" = xmbr_hfs
then
# Exchange arguments for MBR and HFS+ layout
efi_tmp_name=grub-mkrescue-sed-efi-img.$$
mv "$dir"/efi.img /tmp/$efi_tmp_name
x=$(echo " $*" | sed \
-e "s/-efi-boot-part --efi-boot-image/-no-pad -append_partition 2 0xef \/tmp\/$efi_tmp_name/" \
-e "s/--efi-boot efi\.img/-eltorito-alt-boot -e --interval:appended_partition_2:all:: -no-emul-boot/" \
-e "s/--protective-msdos-label/$protective/" \
)
elif test x"$mode" = xmbr_only_copy
then
# Exchange arguments for MBR and HFS+ layout
x=$(echo " $*" | sed \
-e "s/-efi-boot-part --efi-boot-image/-no-pad -append_partition 2 0xef \/tmp\/$(basename "$dir")\/efi.img/" \
-e "s/--protective-msdos-label/$protective/" \
)
elif test x"$mode" = xoriginal
then
# Pass arguments unchanged
x=" $*"
else
echo >&2
echo "$0 : FATAL : Unknown manipulation mode '$mode'." >&2
echo >&2
exit 1
fi
if test x"$debug" = xyes -o x"$debug" = xextra
then
echo "+ converted xorriso arguments:" >&2
echo " $x" >&2
echo >&2
fi
# Run xorriso binary with the converted arguments
"$xorriso" $MKRESCUE_SED_XORRISO_ARGS $x
ret=$?
# Move back the ESP if it was separated
if test -n "$efi_tmp_name" -a -e /tmp/$efi_tmp_name
then
mv /tmp/$efi_tmp_name "$dir"/efi.img
fi
exit $ret