libisoburn/releng/manual_isojigdo

#!/bin/bash

# Copyright 2011 Thomas Schmitt <scdbackup@gmx.net>
# Copyright 2011 George Danchev <danchev@spnet.net>
# Licensed under GNU GPL version 2 or later

set -e

not_in_releng_exit() {
  printf "\nPlease execute the tests from releng directory.\n\n"
  exit 1
}

. inc/releng_getopts.inc || not_in_releng_exit

print_specific_help() {
cat << HLP
Specific options:
       none yet.
Overview:
       Match the resulting ISO image representation
       against the jigdo representation.
HLP
}

if test "$SPECIFIC_HELP" = 1; then
  print_specific_help
  exit 0
fi

if [ ! -x $RELENG_XORRISO ]; then
 print_help
 printf "\n${SELF}: -x  absolute or relative path to binary to be run.\n\n"
 exit 30
fi

# check data dir, if any and after checking -x xorriso
if [ -d "${GEN_DATA_DIR}" ]; then
 printf "\n${SELF}: directory %s exists!" ${GEN_DATA_DIR}
 printf "\n${SELF}: use './${SELF} -c' to remove.\n"
 exit 1
else
 mkdir "${GEN_DATA_DIR}"
fi

TMP_DATA_DIR=releng_generated_data
IMG_EXTRACT_DIR=${GEN_DATA_DIR}/${SELF}_extracted_tree
RELENG_DIR="${IMG_EXTRACT_DIR}"
RELENG_ISOLINUX_BIN="isolinux/isolinux.bin"
RELENG_BOOT_CAT="isolinux/boot.cat"
RELENG_IMG=t1
RES=""
REMOTE_URL="http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd"
REMOTE_IMG="debian-testing-i386-businesscard.iso"
#REMOTE_IMG="debian-testing-i386-netinst.iso"

# check for required items
if [ "${RELENG_XORRISO}" = "" -o "${RELENG_DIR}" = "" -o "${RELENG_IMG}" = "" ]; then
 echo -e "\n${SELF}: xorriso_cmd IN_dir and OUT_image are required\n"
 exit 2
fi

# All must be set at this point
printf "${SELF}: Config items:"
printf "\n\txorriso_cmd=${RELENG_XORRISO}\n\tIN_dir=${RELENG_DIR}\n\tOUT_image=${RELENG_IMG}.iso"
printf "\n\tIN_isolinux=${RELENG_ISOLINUX_BIN}\n\tOUT_bootcat=${RELENG_BOOT_CAT}\n"
RES="${RELENG_IMG}.iso ${RELENG_IMG}.new ${RELENG_IMG}.md5 ${RELENG_IMG}.jigdo ${RELENG_IMG}.template"

# xorriso version details, incl. underlying libraries
# "${RELENG_XORRISO}" -version

# check whether the binary support JTE
set +e
RETSTR_VER_JTE=`"${RELENG_XORRISO}" --version 2>/dev/null | grep "libjte * in use"`
RETCODE_VER_JTE="$?"
set -e
case ${RETCODE_VER_JTE} in
     0)
       printf "\n${SELF}: Found JTE support with ${RELENG_XORRISO} : ${RETSTR_VER_JTE}"
       ;;
     *)
       printf "\nFAIL : ${SELF} : Not found JTE support in ${RELENG_XORRISO}. Quit."
       printf "\n${SELF}: JTE not supported with this xorriso build. Install jigit >=1.18 and rebuild."
       printf "\n${SELF}: http://www.einval.com/~steve/software/JTE/\n"
       cleanup
       exit 4
       ;;
esac

# grab remote ISO image, to decompose
if [ ! -f "${TMP_DATA_DIR}"/"${REMOTE_IMG}" ]; then
 printf "\n${SELF}: Downloading ${REMOTE_URL}/${REMOTE_IMG}\n"
 if wget -V >/dev/null 2>&1
 then
   set +e
   wget --no-check-certificate -T20 -t3 \
        -O "${TMP_DATA_DIR}"/"${REMOTE_IMG}" "${REMOTE_URL}"/"${REMOTE_IMG}"
   WGET_RET="$?"
   set -e
 elif fetch -T 20 -o "${TMP_DATA_DIR}"/"${REMOTE_IMG}" \
            "${REMOTE_URL}"/"${REMOTE_IMG}"
 then
   WGET_RET=0
 else
   echo
   echo "FAIL: ${SELF} : Neither wget nor fetch are present and willing to work"
   cleanup
   exit 10
 fi
 case ${WGET_RET} in
     0)
      echo -e "\n${SELF}: Downloading successfully completed.\n"
     ;;
     *)
      echo -e "\nFAIL : ${SELF} : wget returned code: $WGET_RET\n"
      rm "${TMP_DATA_DIR}"/"${REMOTE_IMG}"
      cleanup
      exit 5
     ;;
 esac
else
 printf "\n${SELF}: Found ISO image: ${TMP_DATA_DIR}/${REMOTE_IMG}\n"
fi

# check for extraction directory existence
if [ -d "${IMG_EXTRACT_DIR}" ]; then
 printf "\n${SELF}: Found ${IMG_EXTRACT_DIR}. Please cleanup.\n"
 cleanup
 exit 6
else
 mkdir "${IMG_EXTRACT_DIR}"
fi

# extract image content
CMD_EXTRACT="${RELENG_XORRISO} -indev ${TMP_DATA_DIR}/${REMOTE_IMG} \
        -osirrox on:auto_chmod_on \
	-extract / ${IMG_EXTRACT_DIR} \
"

# TODO: drop set +e|-e block, catch exit code instead when 
#       the boot catalog warnings get completely resolved.
echo -e "${SELF}: Extracting ISO image:\n${CMD_EXTRACT}\n"
set +e
${CMD_EXTRACT}
set -e

# grab an MBR
ISOHYBRID_MBR="${GEN_DATA_DIR}/isohybrid.mbr"
dd if="${TMP_DATA_DIR}/${REMOTE_IMG}" bs=1K count=32 of="${ISOHYBRID_MBR}"

# create FAT partition
APPEND_PART="${GEN_DATA_DIR}/fatpart.fat"
MKFS_MSDOS="/sbin/mkfs.msdos"
if [ -x "${MKFS_MSDOS}" ]; then
 "${MKFS_MSDOS}" -n Bla -C "${APPEND_PART}" 8192
 APPEND_PART_CMD="-append_partition 2 0x01 ${APPEND_PART}"
else
 APPEND_PART_CMD=

#  printf "\nFAIL : ${SELF} : Not found: ${MKFS_MSDOS}"
#  printf "\n${SELF}: Not found: "${MKFS_MSDOS}". Install dosfstools."
#  printf "\n${SELF}: http://www.daniel-baumann.ch/software/dosfstools/\n"
#  cleanup
#  exit 7
fi

# GENERAL section
CMD="${RELENG_XORRISO} \
 -as mkisofs \
 -quiet \
 -o ${GEN_DATA_DIR}/${RELENG_IMG}.iso \
 -R \
 -V ISOJIGDO \
 -partition_offset 16 \
 -J -joliet-long \
"

# BOOT section
if [ -f "${IMG_EXTRACT_DIR}"/"${RELENG_ISOLINUX_BIN}" -a -f "${ISOHYBRID_MBR}" ]
then
CMD="$CMD \
 -b ${RELENG_ISOLINUX_BIN} \
 -c ${RELENG_BOOT_CAT} \
 -no-emul-boot -boot-load-size 4 -boot-info-table \
 -isohybrid-mbr ${ISOHYBRID_MBR} \
 -partition_offset 16 \
"
else
 printf "\n${SELF}: FAIL to compose the boot section.\n"
 cleanup
 exit 8
fi
if [ -n "${APPEND_PART_CMD}" -a -f "${APPEND_PART}" ]; then
CMD="$CMD \
 ${APPEND_PART_CMD} 
"
fi

# JIGDO section
JIGDO_JIGDO=${GEN_DATA_DIR}/${RELENG_IMG}.jigdo
JIGDO_TEMPLATE=${GEN_DATA_DIR}/${RELENG_IMG}.template

JIGDO_MAP_RHV=$(cd ${RELENG_DIR} 2>/dev/null && pwd)

JIGDO_MAP="Debian=${JIGDO_MAP_RHV}/"

# create jigdo MD5 list in base64 format
JIGDO_GEN_MD5=${GEN_DATA_DIR}/${RELENG_IMG}.md5

printf "${SELF}: Creating MD5 list in hex format in ${JIGDO_GEN_MD5}..."
set +e
./jigdo-gen-md5-list ${RELENG_DIR} > ${JIGDO_GEN_MD5}
ret=$?
set -e

if test "$ret" = 0
then
  printf "Done.\n"
else
  printf "\nFAIL : ${SELF}: ./jigdo-gen-md5-list returns $ret"
  cleanup
  exit 9
fi
 

CMD="$CMD \
 -jigdo-template-compress gzip \
 -checksum_algorithm_iso md5,sha1,sha256,sha512 \
 -checksum_algorithm_template md5,sha1,sha256,sha512 \
 -jigdo-jigdo ${JIGDO_JIGDO} \
 -jigdo-template ${JIGDO_TEMPLATE} \
 -jigdo-map ${JIGDO_MAP} \
 -md5-list ${JIGDO_GEN_MD5} \
 -jigdo-min-file-size 1024 \
"

CMD="$CMD ${RELENG_DIR}"

# Run the whole compound command
echo -e "${SELF}: Creating ISO and jigdo representations:\n$CMD\n"
${CMD}

# Create another imange this time from jigdo files
if which jigit-mkimage >/dev/null 2>&1; then
 printf "${SELF}: Creating new ISO from jigdo files..."
 jigit-mkimage \
  -t ${JIGDO_TEMPLATE} \
  -j ${JIGDO_JIGDO} \
  -m ${JIGDO_MAP} \
  -o ${GEN_DATA_DIR}/${RELENG_IMG}.new
 printf "Done.\n"
else
 printf "\n${SELF}: Not found: jigit-mkimage. Install jigit."
 printf "\n${SELF}: http://www.einval.com/~steve/software/JTE/\n"
 cleanup
 exit 10
fi

# trap the exit code of diff and let the Universe explode
diff ${GEN_DATA_DIR}/${RELENG_IMG}.iso ${GEN_DATA_DIR}/${RELENG_IMG}.new
DIFF_RET="$?"
case ${DIFF_RET} in
     0)
      echo -e "${SELF}: Match: diff ${GEN_DATA_DIR}/${RELENG_IMG}.iso ${GEN_DATA_DIR}/${RELENG_IMG}.new"
     ;;
     *)
      echo -e "FAIL : ${SELF} : diff returned code: $DIFF_RET\n"
     ;;
esac

# sort out the cruft
cleanup

# warn about downloaded image left behind
if [ -f "${TMP_DATA_DIR}"/"${REMOTE_IMG}" ]; then
 printf "${SELF}: Leaving "
 ls -sh "${TMP_DATA_DIR}"/"${REMOTE_IMG}"
fi

# last hints
if [ -d ${GEN_DATA_DIR} ]; then
 printf "\n${SELF}: HINT: manual checks remained to be done:\n"
 printf " * ${GEN_DATA_DIR}/${RELENG_IMG}.iso boots from USB stick and/or optical media.\n"
 printf " * appended FAT partition is mountable.\n"
 printf " * xorriso -indev ${GEN_DATA_DIR}/${RELENG_IMG}.iso -pvd_info\n"
 printf " * fdisk -lu ${GEN_DATA_DIR}/${RELENG_IMG}.iso\n"
fi

exit 0