diff --git a/cdrskin/README b/cdrskin/README index 4d10fbe..a53ae5e 100644 --- a/cdrskin/README +++ b/cdrskin/README @@ -143,6 +143,16 @@ It is not checked for the necessary degree of hacker safety. Get an overview of cdrecord style addresses of available devices cdrskin -scanbus + cdrskin dev=ATA -scanbus + +Note: Adresses reported with dev=ATA are to be used with prefix "ATA:". + Like "ATA:2,2,0" . Their numbers are not cdrecord compatible. See + "Pseudo-SCSI Adresses". It is well possible to use IDE device file + paths like "/dev/hdc" rather than "ATA:2,2,0". + With SCSI devices it is possible to use "/dev/sg1" or "/dev/scd0". +Note: Address numbers have changed since cdrskin-0.2.2. To get the old number + scheme, use option --old_pseudo_scsi_adr . Sorry for any inconvenience. + Obtain some info about the drive cdrskin dev=1,1,0 -checkdrive @@ -233,18 +243,21 @@ the meaning of the components. A cdrecord-style address for cdrskin [prefix:]scsibus,target,lun can be interpreted in two different modes. -Mode --no_pseudo_scsi_adr uses scsibus,target,lun as given by the operating -system. On (old) real SCSI burners and on emulated SCSI it is compatible to -cdrecord even in quite old versions. -On plain ATAPI this mode offers no scsibus,target,lun addressing at all -but refers directly to the device file names /dev/hdX. Modern versions of -cdrecord on kernel 2.6 do accept these addresses too, but the advised method -is rather ATA:scsibus,target,lun which is not supported by cdrskin, yet. +Standard mode uses scsibus,target,lun as given by the operating system. On +(old) real SCSI burners and on emulated SCSI it is compatible to cdrecord. -In standard mode there is a scsibus,target,lun representation for any visible -device. The price for this is that the numbering has nothing to do with SCSI -and thus is not compatible to cdrecord. Each number triple corresponds either -to a device file address or to a libburn drive number. +On plain IDE this mode offers no compatible scsibus,target,lun addressing, +but the cdrecord-ly advised methods ATA:scsibus,target,lun and ATAPI:... +are supported by cdrskin via an own incompatible address enumeration. +In this mode, option -scanbus will list only SCSI devices unless option +dev=ATA or dev=ATAPI are given, which will suppress SCSI devices and only +show IDE drives (i.e. /dev/hdX without ide-scsi emulation). + + +In mode --old_pseudo_scsi_adr there is a scsibus,target,lun representation +which has nothing to do with SCSI and thus is not compatible to cdrecord. +Each number triple corresponds either to a device file address or to a +libburn drive number. Component "scsibus" indicates the translation method. Defined busses are: 0 target is the libburn drivenumber as listed with --devices 1 associated to device file /dev/sgN , target chooses N @@ -263,10 +276,13 @@ a meaning. To stay upward compatible, use addresses as printed by -scanbus. Some programs or users have their own ideas about the address of their burner. K3b 0.10 for example derives cdrecord addresses by own examination of the devices and not by calling cdrecord -scanbus. -On systems where the burners are attached via (emulated) SCSI it is worth -a try to use cdrskin with optio --no_pseudo_scsi_adr . If ATAPI devices are -used directly then this will work well only if the frontend uses /dev/hdX as -address and does not insist in ATA:scsibus,target,lun . +On systems where the burners are attached via (emulated) SCSI, standard mode +will hopefully be fully compatible. If IDE devices are used, then hope that +the frontend uses directly /dev/hdX or asks its "cdrecord:" via +dev=ATA -scanbus for drive addresses and drive descriptions. + +Old frontends which do not know dev=ATA or dev=ATAPI and which do ask their +"cdrecord" via -scanbus may be well served with option --old_pseudo_scsi_adr . To direct any stubborn callers to the appropriate drives, cdrskin allows to define device address aliases. Like diff --git a/cdrskin/cdrskin.c b/cdrskin/cdrskin.c index 3ffc7a1..94ac38d 100644 --- a/cdrskin/cdrskin.c +++ b/cdrskin/cdrskin.c @@ -1159,10 +1159,11 @@ struct CdrpreskiN { clones and SCSI addresses */ int no_convert_fs_adr; - /** Wether Bus,Target,Lun addresses shall not be converted literally as - Pseudo SCSI-Adresses but as (possibly system emulated) real SCSI addresses - via burn_drive_convert_scsi_adr() */ - int no_pseudo_scsi_adr; + /** Wether Bus,Target,Lun addresses shall be converted literally as old + Pseudo SCSI-Adresses. New default is to use (possibly system emulated) + real SCSI addresses via burn_drive_convert_scsi_adr() and literally + emulated and cdrecord-incompatible ATA: addresses. */ + int old_pseudo_scsi_adr; /** Wether bus scans shall exit!=0 if no drive was found */ int scan_demands_drive; @@ -1218,7 +1219,11 @@ int Cdrpreskin_new(struct CdrpreskiN **preskin, int flag) o->allow_fd_source= 0; o->no_whitelist= 0; o->no_convert_fs_adr= 0; - o->no_pseudo_scsi_adr= 0; +#ifdef Cdrskin_libburn_has_convert_scsi_adR + o->old_pseudo_scsi_adr= 0; +#else + o->old_pseudo_scsi_adr= 1; +#endif o->scan_demands_drive= 0; o->abort_on_busy_drive= 0; o->drive_exclusive= 1; @@ -1269,7 +1274,7 @@ int Cdrpreskin_destroy(struct CdrpreskiN **preskin, int flag) bus=0 : drive number , bus=1 : /dev/sgN , bus=2 : /dev/hdX (This call intentionally has no CdrpreskiN argument) @param flag Bitfield for control purposes: - bit0= no_pseudo_scsi_adr + bit0= old_pseudo_scsi_adr @return <=0 error, 1 success */ int Cdrpreskin__cdrecord_to_dev(char *adr, char device_adr[Cdrskin_adrleN], @@ -1316,20 +1321,6 @@ int Cdrpreskin__cdrecord_to_dev(char *adr, char device_adr[Cdrskin_adrleN], if(digit_seen) { sscanf(adr+k+1,"%d",&busno); if(flag&1) { - if(busno<0 || busno>255) { - fprintf(stderr, - "cdrskin: FATAL : dev=[Prefix:]Bus,Target,Lun expects Bus out of {0..255}\n"); - return(0); - } - - /* >>> eventually check for non SCSI prefixes */ - -#ifdef Cdrskin_libburn_has_convert_scsi_adR - ret= burn_drive_convert_scsi_adr(busno,-1,*driveno,lun_no,device_adr); - return(ret); -#endif - - } else { if(busno==1) { sprintf(device_adr,"/dev/sg%d",*driveno); } else if(busno==2) { @@ -1339,6 +1330,24 @@ int Cdrpreskin__cdrecord_to_dev(char *adr, char device_adr[Cdrskin_adrleN], "cdrskin: FATAL : dev=[Prefix:]Bus,Target,Lun expects Bus out of {0,1,2}\n"); return(0); } + } else { + if(busno<0 || busno>255) { + fprintf(stderr, + "cdrskin: FATAL : dev=[Prefix:]Bus,Target,Lun expects Bus out of {0..255}\n"); + return(0); + } + if((strncmp(adr,"ATA",3)==0 && (adr[3]==0 || adr[3]==':')) || + (strncmp(adr,"ATAPI",5)==0 && (adr[5]==0 || adr[5]==':'))) { + + /* >>> in future expect busno to have a meaning */ + sprintf(device_adr,"/dev/hd%c",'a'+(*driveno)); + +#ifdef Cdrskin_libburn_has_convert_scsi_adR + } else { + ret= burn_drive_convert_scsi_adr(busno,-1,*driveno,lun_no,device_adr); + return(ret); +#endif + } } } } @@ -1597,12 +1606,8 @@ set_dev:; " --ignore_signals try to ignore any signals rather than to abort\n"); printf(" --no_abort_handler exit even if the drive is in busy state\n"); printf(" --no_blank_appendable refuse to blank appendable CD-RW\n"); - -#ifdef Cdrskin_libburn_has_convert_scsi_adR - printf(" --no_pseudo_scsi_adr use and report real Bus,Target,Lun\n"); - printf(" (not yet with \"ATA:\", \"ATAPI:\" ...)\n"); -#endif - + printf(" --old_pseudo_scsi_adr use and report literal Bus,Target,Lun\n"); + printf(" rather than real SCSI and pseudo ATA.\n"); printf(" --no_convert_fs_adr only literal translations of dev=\n"); printf( " --no_rc as first argument: do not read startup files\n"); @@ -1713,10 +1718,8 @@ see_cdrskin_eng_html:; } else if(strcmp(argv[i],"--no_convert_fs_adr")==0) { o->no_convert_fs_adr= 1; -#ifdef Cdrskin_libburn_has_convert_scsi_adR - } else if(strcmp(argv[i],"--no_pseudo_scsi_adr")==0) { - o->no_pseudo_scsi_adr= 1; -#endif + } else if(strcmp(argv[i],"--old_pseudo_scsi_adr")==0) { + o->old_pseudo_scsi_adr= 1; } else if(strcmp(argv[i],"--no_rc")==0) { if(i!=1) @@ -1790,7 +1793,7 @@ dev_too_long:; strcpy(o->device_adr,adr); } else { ret= Cdrpreskin__cdrecord_to_dev(adr,o->device_adr,&driveno, - !!o->no_pseudo_scsi_adr); + !!o->old_pseudo_scsi_adr); if(ret<=0) { fprintf(stderr, "cdrskin: FATAL : dev= expects /dev/xyz, Bus,Target,0 or a number\n"); @@ -2664,7 +2667,7 @@ location_not_found:; return(1); } ret= Cdrpreskin__cdrecord_to_dev(adr,synthetic_adr,driveno, - !!skin->preskin->no_pseudo_scsi_adr); + !!skin->preskin->old_pseudo_scsi_adr); if(ret<=0) { wrong_devno:; if(skin->n_drives<=0) { @@ -2703,8 +2706,12 @@ wrong_devno:; represents a device address if possible and the drive number else. @param flag Bitfield for control purposes: bit0= do not apply user defined address translation - @return <0 error, 0 drive number, 1 /dev/sgN, 2 /dev/hdX, - 1000+busno = non-pseudo SCSI bus + @return <0 error, + pseudo transport groups: + 0 volatile drive number, + 1 /dev/sgN, 2 /dev/hdX, + 1000+busno = non-pseudo SCSI bus + 2000+busno = pseudo-ATA|ATAPI SCSI bus (currently busno==2) */ int Cdrskin_driveno_to_btldev(struct CdrskiN *skin, int driveno, char btldev[Cdrskin_adrleN], int flag) @@ -2728,16 +2735,24 @@ int Cdrskin_driveno_to_btldev(struct CdrskiN *skin, int driveno, #endif #ifdef Cdrskin_libburn_has_convert_scsi_adR - if(skin->preskin->no_pseudo_scsi_adr) { + if(!skin->preskin->old_pseudo_scsi_adr) { int host_no= -1,channel_no= -1,target_no= -1,lun_no= -1; ret= burn_drive_obtain_scsi_adr(loc,&host_no,&channel_no,&target_no, &lun_no); - if(ret<=0) + if(ret<=0) { + if(strncmp(loc,"/dev/hd",7)==0) + if(loc[7]>='a' && loc[7]<='z') + if(loc[8]==0) { + sprintf(btldev,"2,%d,0",loc[7]-'a'); + {ret= 2002; goto adr_translation;} + } goto fallback; - sprintf(btldev,"%d,%d,%d",host_no,target_no,lun_no); - ret= 1000+host_no; - goto adr_translation; + } else { + sprintf(btldev,"%d,%d,%d",host_no,target_no,lun_no); + ret= 1000+host_no; + goto adr_translation; + } } #endif @@ -2757,13 +2772,14 @@ int Cdrskin_driveno_to_btldev(struct CdrskiN *skin, int driveno, {ret= 2; goto adr_translation;} } fallback:; - if(skin->preskin->no_pseudo_scsi_adr) { + if(skin->preskin->old_pseudo_scsi_adr) { + sprintf(btldev,"0,%d,0",driveno); + } else { if(loc!=NULL) strcpy(btldev,loc); else sprintf(btldev,"%d",driveno); - } else - sprintf(btldev,"0,%d,0",driveno); + } ret= 0; adr_translation:; @@ -2816,9 +2832,9 @@ int Cdrskin_report_disc_status(struct CdrskiN *skin, enum burn_disc_status s, */ int Cdrskin_scanbus(struct CdrskiN *skin, int flag) { - int ret,i,busno,first_on_bus; + int ret,i,busno,first_on_bus,pseudo_transport_group= 0,skipped_devices= 0; char shellsafe[5*Cdrskin_strleN+2],perms[40],btldev[Cdrskin_adrleN]; - char adr[Cdrskin_adrleN]; + char adr[Cdrskin_adrleN],*raw_dev; struct stat stbuf; if(flag&1) { @@ -2857,23 +2873,57 @@ int Cdrskin_scanbus(struct CdrskiN *skin, int flag) } printf("-----------------------------------------------------------------------------\n"); } else { - printf("Using libburn version '%s'.\n",Cdrskin_libburn_versioN); + if(!skin->preskin->old_pseudo_scsi_adr) { + pseudo_transport_group= 1000; + raw_dev= skin->preskin->raw_device_adr; + if(strncmp(raw_dev,"ATA",3)==0 && (raw_dev[3]==0 || raw_dev[3]==':')) + pseudo_transport_group= 2000; + if(strncmp(raw_dev,"ATAPI",5)==0 && (raw_dev[5]==0 || raw_dev[5]==':')) + pseudo_transport_group= 2000; + if(pseudo_transport_group==2000) { + fprintf(stderr,"scsidev: 'ATA'\ndevname: 'ATA'\n"); + fprintf(stderr,"scsibus: -2 target: -2 lun: -2\n"); + } + } + /* >>> fprintf(stderr,"Linux sg driver version: 3.1.25\n"); */ + printf("Using libburn version '%s'.\n", Cdrskin_libburn_versioN); + if(pseudo_transport_group!=1000) + printf( + "cdrskin: NOTE : The printed addresses are not cdrecord compatible !\n"); + for(busno= 0;busno<16;busno++) { first_on_bus= 1; for(i=0;in_drives;i++) { ret= Cdrskin_driveno_to_btldev(skin,i,btldev,1); - if(ret==1000+busno) + if(ret==pseudo_transport_group + busno) ret= busno; - if(ret!=busno) + if(ret!=busno) { + if((ret%1000)==busno) { + skipped_devices++; + if(skin->verbosity>=Cdrskin_verbose_debuG) + ClN(fprintf(stderr,"cdrskin_debug: skipping drive '%s'\n", + btldev)); + } continue; + } if(first_on_bus) printf("scsibus%d:\n",busno); first_on_bus= 0; - printf("\t%s\t %d) '%s' '%s' '%s' Removable CD-ROM\n", - btldev,i,skin->drives[i].vendor,skin->drives[i].product,"?"); + printf("\t%s\t %d) '%-8s' '%-16s' '%-4s' Removable CD-ROM\n", + btldev,i,skin->drives[i].vendor,skin->drives[i].product,"?..?"); } } } + if(skipped_devices>0) { + if(skipped_devices>1) + printf("cdrskin: NOTE : There were %d drives not shown.\n", + skipped_devices); + else + printf("cdrskin: NOTE : There was 1 drives not shown.\n"); + printf("cdrskin: HINT : To surely see all drives try option: --devices\n"); + if(pseudo_transport_group!=2000) + printf("cdrskin: HINT : or try options: dev=ATA -scanbus\n"); + } return(1); } @@ -3708,8 +3758,12 @@ int Cdrskin_eject(struct CdrskiN *skin, int flag) if(!skin->do_eject) return(1); + + /* A60923 : + Still not in libburn-0.2.2 : prevent SIGSEV on non-existent drive */ if(skin->n_drives<=skin->driveno || skin->driveno < 0) return(2); + for(i= 0;i0 || i>=max_try-1) @@ -4129,10 +4183,8 @@ gracetime_equals:; } else if(strcmp(argv[i],"--no_convert_fs_adr")==0) { /* is handled in Cdrpreskin_setup() */; -#ifdef Cdrskin_libburn_has_convert_scsi_adR - } else if(strcmp(argv[i],"--no_pseudo_scsi_adr")==0) { + } else if(strcmp(argv[i],"--old_pseudo_scsi_adr")==0) { /* is handled in Cdrpreskin_setup() */; -#endif } else if(strcmp(argv[i],"--no_rc")==0) { /* is handled in Cdrpreskin_setup() */; diff --git a/cdrskin/cdrskin_timestamp.h b/cdrskin/cdrskin_timestamp.h index 9ffcaef..ece3d6d 100644 --- a/cdrskin/cdrskin_timestamp.h +++ b/cdrskin/cdrskin_timestamp.h @@ -1 +1 @@ -#define Cdrskin_timestamP "2006.09.23.132755" +#define Cdrskin_timestamP "2006.09.23.182444"