libisofs-legacy/libburn/read.c
2006-08-15 20:37:04 +00:00

265 lines
6.3 KiB
C

/* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */
#include <malloc.h>
#include <unistd.h>
#include <signal.h>
#include <assert.h>
#include <stdio.h>
#include <string.h>
#include <ctype.h>
#include "sector.h"
#include "libburn.h"
#include "drive.h"
#include "transport.h"
#include "message.h"
#include "crc.h"
#include "debug.h"
#include "init.h"
#include "lec.h"
#include "toc.h"
#include "util.h"
#include "sg.h"
#include "read.h"
#include "options.h"
void burn_disc_read(struct burn_drive *d, const struct burn_read_opts *o)
{
#if 0
int i, end, maxsects, finish;
int seclen;
int drive_lba;
unsigned short crc;
unsigned char fakesub[96];
struct buffer page;
int speed;
assert((o->version & 0xfffff000) == (OPTIONS_VERSION & 0xfffff000));
assert(!d->busy);
assert(d->toc->valid);
assert(o->datafd != -1);
/* XXX not sure this is a good idea. copy it? */
/* XXX also, we have duplicated data now, do we remove the fds from struct
drive, or only store a subset of the _opts structs in drives */
/* set the speed on the drive */
speed = o->speed > 0 ? o->speed : d->mdata->max_read_speed;
d->set_speed(d, speed, 0);
d->params.retries = o->hardware_error_retries;
d->send_parameters(d, o);
d->cancel = 0;
d->busy = BURN_DRIVE_READING;
d->currsession = 0;
/* drive_lba = 232000;
d->currtrack = 18;
*/
d->currtrack = 0;
drive_lba = 0;
/* XXX removal of this line obviously breaks *
d->track_end = burn_track_end(d, d->currsession, d->currtrack);*/
printf("track ends at %d\n", d->track_end);
page.sectors = 0;
page.bytes = 0;
if (o->subfd != -1) {
memset(fakesub, 0xFF, 12);
memset(fakesub + 12, 0, 84);
fakesub[13] = 1;
fakesub[14] = 1;
fakesub[20] = 2;
fakesub[12] = (d->toc->toc_entry[0].control << 4) +
d->toc->toc_entry[0].adr;
crc = crc_ccitt(fakesub + 12, 10);
fakesub[22] = crc >> 8;
fakesub[23] = crc & 0xFF;
write(o->subfd, fakesub, 96);
}
while (1) {
seclen = burn_sector_length_read(d, o);
burn_print(12, "received %d blocks\n", page.sectors);
for (i = 0; i < page.sectors; i++) {
burn_packet_process(d, page.data + seclen * i, o);
d->track_end--;
drive_lba++;
}
if ((d->cancel) || (drive_lba == LAST_SESSION_END(d))) {
burn_print(1, "finished or cancelled\n");
d->busy = BURN_DRIVE_IDLE;
if (!d->cancel)
d->toc->complete = 1;
return;
}
/* XXX: removal of this line obviously breaks *
end = burn_track_end(d, d->currsession, d->currtrack); */
if (drive_lba == end) {
d->currtrack++;
if (d->currtrack >
d->toc->session[d->currsession].lasttrack) {
d->currsession++;
burn_print(12, "session switch to %d\n",
d->currsession);
burn_print(12, "skipping a lead out\n");
drive_lba = CURRENT_SESSION_START(d);
burn_print(12, "new lba %d\n", drive_lba);
/* XXX more of the same
end = burn_track_end(d, d->currsession,
d->currtrack);
*/ }
burn_print(12, "track switch to %d\n", d->currtrack);
}
page.sectors = 0;
page.bytes = 0;
maxsects = BUFFER_SIZE / seclen;
finish = end - drive_lba;
d->track_end = finish;
page.sectors = (finish < maxsects) ? finish : maxsects;
printf("reading %d sectors from %d\n", page.sectors,
drive_lba);
d->read_sectors(d, drive_lba, page.sectors, o, &page);
printf("Read %d\n", page.sectors);
}
#endif
}
int burn_sector_length_read(struct burn_drive *d,
const struct burn_read_opts *o)
{
int dlen = 2352;
int data;
/*XXX how do we handle this crap now?*/
/* data = d->toc->track[d->currtrack].toc_entry->control & 4;*/
data = 1;
if (o->report_recovered_errors)
dlen += 294;
if ((o->subcodes_data) && data)
dlen += 96;
if ((o->subcodes_audio) && !data)
dlen += 96;
return dlen;
}
static int bitcount(unsigned char *data, int n)
{
int i, j, count = 0;
unsigned char tem;
for (i = 0; i < n; i++) {
tem = data[i];
for (j = 0; j < 8; j++) {
count += tem & 1;
tem >>= 1;
}
}
return count;
}
void burn_packet_process(struct burn_drive *d, unsigned char *data,
const struct burn_read_opts *o)
{
unsigned char sub[96];
unsigned short crc;
int ptr = 2352, i, j, code, fb;
int audio = 1;
if (o->c2errors) {
fb = bitcount(data + ptr, 294);
if (fb) {
burn_print(1, "%d damaged bits\n",
bitcount(data + ptr, 294));
burn_print(1, "sending error on %s %s\n",
d->idata->vendor, d->idata->product);
/* XXX send a burn_message! burn_message_error(d,
something); */
}
ptr += 294;
}
/*
if (d->toc->track[d->currtrack].mode == BURN_MODE_UNINITIALIZED) {
if ((d->toc->track[d->currtrack].toc_entry->control & 4) == 0)
d->toc->track[d->currtrack].mode = BURN_MODE_AUDIO;
else
switch (data[15]) {
case 0:
d->toc->track[d->currtrack].mode = BURN_MODE0;
break;
case 1:
d->toc->track[d->currtrack].mode = BURN_MODE1;
break;
case 2:
d->toc->track[d->currtrack].mode =
BURN_MODE2_FORMLESS;
break;
}
}
*/
if ((audio && o->subcodes_audio)
|| (!audio && o->subcodes_data)) {
memset(sub, 0, sizeof(sub));
for (i = 0; i < 12; i++) {
for (j = 0; j < 8; j++) {
for (code = 0; code < 8; code++) {
sub[code * 12 + i] <<= 1;
if (data[ptr + j + i * 8] &
(1 << (7 - code)))
sub[code * 12 + i]++;
}
}
}
crc = (*(sub + 22) << 8) + *(sub + 23);
if (crc != crc_ccitt(sub + 12, 10)) {
burn_print(1, "sending error on %s %s\n",
d->idata->vendor, d->idata->product);
/* e = burn_error();
e->drive = d;
*/
burn_print(1, "crc mismatch in Q\n");
}
/* else process_q(d, sub + 12); */
/*
if (o->subfd != -1) write(o->subfd, sub, 96); */
}
/*
if ((d->track_end <= 150)
&& (drive_lba + 150 < CURRENT_SESSION_END(d))
&& (TOC_ENTRY(d->toc, d->currtrack).control == 4)
&& (TOC_ENTRY(d->toc, d->currtrack + 1).control == 0)) {
burn_print(12, "pregap : %d\n", d->track_end);
write(o->binfd, zeros, 2352);
#warning XXX WHERE ARE MY SUBCODES
} else
*//* write(o->datafd, data, 2352); */
}
/* so yeah, when you uncomment these, make them write zeros insted of crap
static void write_empty_sector(int fd)
{
char sec[2352];
burn_print(1, "writing an 'empty' sector\n");
write(fd, sec, 2352);
}
static void write_empty_subcode(int fd)
{
char sub[96];
write(fd, sub, 96);
}
static void flipq(unsigned char *sub)
{
*(sub + 12 + 10) = ~*(sub + 12 + 10);
*(sub + 12 + 11) = ~*(sub + 12 + 11);
}
*/