diff --git a/libisofs/ecma119.h b/libisofs/ecma119.h index ffb1611..a4022ad 100644 --- a/libisofs/ecma119.h +++ b/libisofs/ecma119.h @@ -1,8 +1,8 @@ /* * Copyright (c) 2007 Vreixo Formoso - * - * This file is part of the libisofs project; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version 2 as + * + * This file is part of the libisofs project; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. See COPYING file for details. */ @@ -18,6 +18,18 @@ #define BLOCK_SIZE 2048 +/* + * Maximum file section size. Set to 4GB - 1 = 0xffffffff + */ +#define MAX_ISO_FILE_SECTION_SIZE 0xffffffff + +/* + * When a file need to be splitted in several sections, the maximum size + * of such sections, but the last one. Set to a multiple of BLOCK_SIZE. + * Default to 4GB - 2048 = 0xFFFFF800 + */ +#define ISO_EXTENT_SIZE 0xFFFFF800 + /** * Holds the options for the image generation. */ @@ -33,11 +45,11 @@ struct iso_write_opts { /* allways write timestamps in GMT */ unsigned int always_gmt :1; - /* + /* * Relaxed constraints. Setting any of these to 1 break the specifications, - * but it is supposed to work on most moderns systems. Use with caution. + * but it is supposed to work on most moderns systems. Use with caution. */ - + /** * Omit the version number (";1") at the end of the ISO-9660 identifiers. * Version numbers are usually not used. @@ -45,7 +57,7 @@ struct iso_write_opts { unsigned int omit_version_numbers :1; /** - * Allow ISO-9660 directory hierarchy to be deeper than 8 levels. + * Allow ISO-9660 directory hierarchy to be deeper than 8 levels. */ unsigned int allow_deep_paths :1; @@ -64,30 +76,30 @@ struct iso_write_opts { /** * ISO-9660 forces filenames to have a ".", that separates file name from - * extension. libisofs adds it if original filename doesn't has one. Set + * extension. libisofs adds it if original filename doesn't has one. Set * this to 1 to prevent this behavior */ unsigned int no_force_dots :1; - + /** - * Allow lowercase characters in ISO-9660 filenames. By default, only - * uppercase characters, numbers and a few other characters are allowed. + * Allow lowercase characters in ISO-9660 filenames. By default, only + * uppercase characters, numbers and a few other characters are allowed. */ unsigned int allow_lowercase :1; - + /** * Allow all ASCII characters to be appear on an ISO-9660 filename. Note * that "/" and "\0" characters are never allowed, even in RR names. */ unsigned int allow_full_ascii :1; - + /** * Allow all characters to be part of Volume and Volset identifiers on * the Primary Volume Descriptor. This breaks ISO-9660 contraints, but * should work on modern systems. */ unsigned int relaxed_vol_atts :1; - + /** * Allow paths in the Joliet tree to have more than 240 characters. */ @@ -102,7 +114,7 @@ struct iso_write_opts { * If 0, the corresponding attribute will be kept as setted in the IsoNode. * Unless you have changed it, it corresponds to the value on disc, so it * is suitable for backup purposes. If set to 1, the corresponding attrib. - * will be changed by a default suitable value. Finally, if you set it to + * will be changed by a default suitable value. Finally, if you set it to * 2, the attrib. will be changed with the value specified in the options * below. Note that for mode attributes, only the permissions are set, the * file type remains unchanged. @@ -133,62 +145,62 @@ struct iso_write_opts { /** * This flags control the type of the image to create. Libisofs support - * two kind of images: stand-alone and appendable. - * + * two kind of images: stand-alone and appendable. + * * A stand-alone image is an image that is valid alone, and that can be * mounted by its own. This is the kind of image you will want to create * in most cases. A stand-alone image can be burned in an empty CD or DVD, * or write to an .iso file for future burning or distribution. - * + * * On the other side, an appendable image is not self contained, it refers * to serveral files that are stored outside the image. Its usage is for - * multisession discs, where you add data in a new session, while the - * previous session data can still be accessed. In those cases, the old + * multisession discs, where you add data in a new session, while the + * previous session data can still be accessed. In those cases, the old * data is not written again. Instead, the new image refers to it, and thus * it's only valid when appended to the original. Note that in those cases * the image will be written after the original, and thus you will want - * to use a ms_block greater than 0. - * - * Note that if you haven't import a previous image (by means of + * to use a ms_block greater than 0. + * + * Note that if you haven't import a previous image (by means of * iso_image_import()), the image will always be a stand-alone image, as * there is no previous data to refer to. */ unsigned int appendable : 1; - + /** * Start block of the image. It is supposed to be the lba where the first * block of the image will be written on disc. All references inside the * ISO image will take this into account, thus providing a mountable image. - * - * For appendable images, that are written to a new session, you should + * + * For appendable images, that are written to a new session, you should * pass here the lba of the next writable address on disc. - * - * In stand alone images this is usually 0. However, you may want to + * + * In stand alone images this is usually 0. However, you may want to * provide a different ms_block if you don't plan to burn the image in the * first session on disc, such as in some CD-Extra disc whether the data - * image is written in a new session after some audio tracks. + * image is written in a new session after some audio tracks. */ uint32_t ms_block; /** - * When not NULL, it should point to a buffer of at least 64KiB, where + * When not NULL, it should point to a buffer of at least 64KiB, where * libisofs will write the contents that should be written at the beginning * of a overwriteable media, to grow the image. The growing of an image is * a way, used by first time in growisofs by Andy Polyakov, to allow the * appending of new data to non-multisession media, such as DVD+RW, in the * same way you append a new session to a multisession disc, i.e., without - * need to write again the contents of the previous image. - * + * need to write again the contents of the previous image. + * * Note that if you want this kind of image growing, you will also need to * set appendable to "1" and provide a valid ms_block after the previous * image. - * - * You should initialize the buffer either with 0s, or with the contents of - * the first blocks of the image you're growing. In most cases, 0 is good + * + * You should initialize the buffer either with 0s, or with the contents of + * the first blocks of the image you're growing. In most cases, 0 is good * enought. */ uint8_t *overwrite; - + /** * Size, in number of blocks, of the FIFO buffer used between the writer * thread and the burn_source. You have to provide at least a 32 blocks @@ -228,13 +240,13 @@ struct ecma119_image unsigned int no_force_dots :1; unsigned int allow_lowercase :1; unsigned int allow_full_ascii :1; - + unsigned int relaxed_vol_atts : 1; - + /** Allow paths on Joliet tree to be larger than 240 bytes */ unsigned int joliet_longer_paths :1; - /* + /* * Mode replace. If one of these flags is set, the correspodent values are * replaced with values below. */ @@ -251,7 +263,7 @@ struct ecma119_image time_t timestamp; /** - * if sort files or not. Sorting is based of the weight of each file + * if sort files or not. Sorting is based of the weight of each file */ int sort_files; @@ -282,7 +294,7 @@ struct ecma119_image */ uint32_t curblock; - /* + /* * number of dirs in ECMA-119 tree, computed together with dir position, * and needed for path table computation in a efficient way */ @@ -290,7 +302,7 @@ struct ecma119_image uint32_t path_table_size; uint32_t l_path_table_pos; uint32_t m_path_table_pos; - + /* * Joliet related information */ @@ -299,7 +311,7 @@ struct ecma119_image uint32_t joliet_path_table_size; uint32_t joliet_l_path_table_pos; uint32_t joliet_m_path_table_pos; - + /* * ISO 9660:1999 related information */ @@ -308,7 +320,7 @@ struct ecma119_image uint32_t iso1999_path_table_size; uint32_t iso1999_l_path_table_pos; uint32_t iso1999_m_path_table_pos; - + /* * El-Torito related information */ @@ -322,10 +334,10 @@ struct ecma119_image * data. These padding blocks are added by libisofs to improve the handling * of image growing. The idea is that the first blocks in the image are * overwritten with the volume descriptors of the new image. These first - * blocks usually correspond to the volume descriptors and directory - * structure of the old image, and can be safety overwritten. However, - * with very small images they might correspond to valid data. To ensure - * this never happens, what we do is to add padding bytes, to ensure no + * blocks usually correspond to the volume descriptors and directory + * structure of the old image, and can be safety overwritten. However, + * with very small images they might correspond to valid data. To ensure + * this never happens, what we do is to add padding bytes, to ensure no * file data is written in the first 64 KiB, that are the bytes we usually * overwrite. */ diff --git a/libisofs/ecma119_tree.c b/libisofs/ecma119_tree.c index a787d7c..34829a5 100644 --- a/libisofs/ecma119_tree.c +++ b/libisofs/ecma119_tree.c @@ -161,7 +161,7 @@ int create_file(Ecma119Image *img, IsoFile *iso, Ecma119Node **node) off_t size; size = iso_stream_get_size(iso->stream); - if (size > (off_t)0xffffffff && img->iso_level != 3) { + if (size > (off_t)MAX_ISO_FILE_SECTION_SIZE && img->iso_level != 3) { return iso_msg_submit(img->image->id, ISO_FILE_TOO_BIG, 0, "File \"%s\" can't be added to image because " "is greater than 4GB", iso->node.name); diff --git a/libisofs/filesrc.c b/libisofs/filesrc.c index c1f7af8..102cb57 100644 --- a/libisofs/filesrc.c +++ b/libisofs/filesrc.c @@ -187,26 +187,28 @@ int filesrc_writer_compute_data_blocks(IsoImageWriter *writer) IsoFileSrc *file = filelist[i]; off_t section_size = iso_stream_get_size(file->stream); - if (section_size > (off_t) 0xffffffff) { + if (section_size > (off_t) MAX_ISO_FILE_SECTION_SIZE) { file->nsections = DIV_UP(iso_stream_get_size(file->stream) - - (off_t) 0xffffffff, (off_t)0xFFFFF800) + 1; + - (off_t) MAX_ISO_FILE_SECTION_SIZE, + (off_t)ISO_EXTENT_SIZE) + 1; } else { file->nsections = 1; } file->sections = realloc(file->sections, file->nsections * sizeof(struct iso_file_section)); for (extent = 0; extent < file->nsections - 1; ++extent) { - file->sections[extent].block = t->curblock + extent * 2097151; - file->sections[extent].size = 0xFFFFF800; - section_size -= (off_t) 0xFFFFF800; + file->sections[extent].block = t->curblock + extent * + (ISO_EXTENT_SIZE / BLOCK_SIZE); + file->sections[extent].size = ISO_EXTENT_SIZE; + section_size -= (off_t) ISO_EXTENT_SIZE; } /* * final section */ - file->sections[extent].block = t->curblock + extent * 2097151; + file->sections[extent].block = t->curblock + extent * (ISO_EXTENT_SIZE / BLOCK_SIZE); file->sections[extent].size = section_size; - section_size -= (off_t) 0xFFFFF800; + section_size -= (off_t) ISO_EXTENT_SIZE; t->curblock += DIV_UP(iso_file_src_get_size(file), BLOCK_SIZE); } diff --git a/libisofs/iso1999.c b/libisofs/iso1999.c index afcc37f..0a58a99 100644 --- a/libisofs/iso1999.c +++ b/libisofs/iso1999.c @@ -117,7 +117,7 @@ int create_node(Ecma119Image *t, IsoNode *iso, Iso1999Node **node) IsoFile *file = (IsoFile*) iso; size = iso_stream_get_size(file->stream); - if (size > (off_t)0xffffffff && t->iso_level != 3) { + if (size > (off_t)MAX_ISO_FILE_SECTION_SIZE && t->iso_level != 3) { free(n); return iso_msg_submit(t->image->id, ISO_FILE_TOO_BIG, 0, "File \"%s\" can't be added to image because is " diff --git a/libisofs/joliet.c b/libisofs/joliet.c index 4c00ab9..e695a1d 100644 --- a/libisofs/joliet.c +++ b/libisofs/joliet.c @@ -111,7 +111,7 @@ int create_node(Ecma119Image *t, IsoNode *iso, JolietNode **node) IsoFile *file = (IsoFile*) iso; size = iso_stream_get_size(file->stream); - if (size > (off_t)0xffffffff && t->iso_level != 3) { + if (size > (off_t)MAX_ISO_FILE_SECTION_SIZE && t->iso_level != 3) { free(joliet); return iso_msg_submit(t->image->id, ISO_FILE_TOO_BIG, 0, "File \"%s\" can't be added to image because is " diff --git a/libisofs/libisofs.h b/libisofs/libisofs.h index f18aa50..9fbb1f1 100644 --- a/libisofs/libisofs.h +++ b/libisofs/libisofs.h @@ -2546,7 +2546,7 @@ int iso_file_get_old_image_lba(IsoFile *file, uint32_t *lba, int flag); * @param file * The file * @param section_count - * Returns the number of extent entries in sections arrays + * Returns the number of extent entries in sections array. * @param sections * Returns the array of file sections. Apply free() to dispose it. * @param flag