Documentation of stdio-drives

This commit is contained in:
Thomas Schmitt 2007-09-08 16:09:52 +00:00
parent 00d109aefa
commit 3a84e030be

View File

@ -363,12 +363,12 @@ struct burn_drive_info
char product[17];
/** Revision of the drive */
char revision[5];
/** Location of the drive in the filesystem. */
/** Invalid: Was: "Location of the drive in the filesystem." */
/** This string has no meaning any more. Once it stored the persistent
drive address. Now always use function burn_drive_d_get_adr() to
inquire a persistent address. ^^^^^^ ALWAYS ^^^^^^^^ */
char location[17];
/** This is currently the string which is used as persistent
drive address. But be warned: there is NO GUARANTEE that this
will stay so. Always use function burn_drive_get_adr() to
inquire a persistent address. ^^^^^^ ALWAYS ^^^^^^ */
/** Can the drive read DVD-RAM discs */
unsigned int read_dvdram:1;
@ -622,24 +622,47 @@ void burn_allow_untested_profiles(int yes);
/* ts A60823 */
/** Aquire a drive with known persistent address.This is the sysadmin friendly
/** Aquire a drive with known persistent address. This is the sysadmin friendly
way to open one drive and to leave all others untouched. It bundles
the following API calls to form a non-obtrusive way to use libburn:
burn_drive_add_whitelist() , burn_drive_scan() , burn_drive_grab()
You are *strongly urged* to use this call whenever you know the drive
address in advance.
If not, then you have to use directly above calls. In that case, you are
*strongly urged* to drop any unintended drive which will be exclusively
occupied and not closed by burn_drive_scan().
This can be done by shutting down the library including a call to
burn_finish(). You may later start a new libburn session and should then
use the function described here with an address obtained after
burn_drive_scan() via burn_drive_get_adr(&(drive_infos[driveno]), adr) .
burn_drive_scan() via burn_drive_d_get_adr(drive_infos[driveno].drive,adr).
Another way is to drop the unwanted drives by burn_drive_info_forget().
Other than with burn_drive_scan() it is allowed to call
burn_drive_scan_and_grab() without giving up any other scanned drives.
So this call can be used to hold aquired more than one drive at a time.
Operating on multiple drives:
Different than with burn_drive_scan() it is allowed to call
burn_drive_scan_and_grab() without giving up any other scanned drives. So
this call can be used to get a collection of more than one aquired drives.
The attempt to aquire the same drive twice will fail, though.
Pseudo-drives:
burn_drive_scan_and_grab() is able to aquire virtual drives which will
accept options much like a MMC burner drive. Many of those options will not
cause any effect, though. The address of a pseudo-drive begins with
prefix "stdio:" optionally followed by the path to an existing regular
file, or to a not yet existing file, or to an existing block device.
Example: "stdio:/tmp/pseudo_drive"
If the path is empty then the resulting pseudo-drive is a null-drive.
A null-drive will pretend to have loaded no media and support no writing.
A pseudo-drive with a non-empty path is called a stdio-drive.
It will perform all its eventual data transfer activities on a file
via standard i/o functions open(2), lseek(2), read(2), write(2), close(2).
Its capabilities resemble DVD-RAM but the media profile reported is 0xffff,
it can simulate writing and it issues no realistic write space information.
If the path does not exist in the filesystem yet, it is attempted to create
it as a regular file as soon as write operations are started.
One may distinguish pseudo-drives from MMC drives by call
burn_drive_get_drive_role().
@param drive_infos On success returns a one element array with the drive
(cdrom/burner). Thus use with driveno 0 only. On failure
@ -649,9 +672,10 @@ void burn_allow_untested_profiles(int yes);
function again.
This is a result from call burn_drive_scan(). See there.
Use with driveno 0 only.
@param adr The persistent address of the desired drive. Either obtained
by burn_drive_get_adr() or guessed skillfully by application
resp. its user.
@param adr The persistent address of the desired drive. Either once
obtained by burn_drive_d_get_adr() or composed skillfully by
application resp. its user. E.g. "/dev/sr0".
Consider to preprocess it by burn_drive_convert_fs_adr().
@param load Nonzero to make the drive attempt to load a disc (close its
tray door, etc).
@return 1 = success , 0 = drive not found , -1 = other error
@ -737,7 +761,7 @@ int burn_drive_d_get_adr(struct burn_drive *drive, char adr[]);
/** Inquire the persistent address of a drive via a given drive_info object.
(Note: This is a legacy call.)
@param drive_info The drive to inquire. Usually some &(drive_infos[driveno])
@param drive_info The drive to inquire.Usually some &(drive_infos[driveno])
@param adr An application provided array of at least BURN_DRIVE_ADR_LEN
characters size. The persistent address gets copied to it.
@return >0 success , <=0 error (due to libburn internal problem)
@ -785,7 +809,7 @@ int burn_drive_convert_scsi_adr(int bus_no, int host_no, int channel_no,
/* ts A60923 - A61005 */
/** Try to obtain bus,host,channel,target,lun from path. If there is an SCSI
address at all, then this call should succeed with a persistent
drive address obtained via burn_drive_get_adr(). It is also supposed to
drive address obtained via burn_drive_d_get_adr(). It is also supposed to
succeed with any device file of a (possibly emulated) SCSI device.
@return 1 = success , 0 = failure , -1 = severe error
*/
@ -920,6 +944,8 @@ off_t burn_disc_available_space(struct burn_drive *d,
0x1a "DVD+RW", 0x1b "DVD+R".
If enabled by burn_allow_untested_profiles() it also writes to profiles
0x15 "DVD-R/DL sequential recording", 0x2b "DVD+R/DL".
Writeable stdio-drives return this profile
0xffff "stdio file"
@param d The drive where the media is inserted.
@param pno Profile Number as of mmc5r03c.pdf, table 89
@param name Profile Name (see above list, unknown profiles have empty name)
@ -1440,9 +1466,19 @@ void burn_write_opts_set_toc_entries(struct burn_write_opts *opts,
*/
void burn_write_opts_set_format(struct burn_write_opts *opts, int format);
/** Sets the simulate value for the write_opts struct
/** Sets the simulate value for the write_opts struct .
This corresponds to the Test Write bit in MMC mode page 05h. Several media
types do not support this. See struct burn_multi_caps.might_simulate for
actual availability of this feature.
If the media is suitable, the drive will perform burn_write_disc() as a
simulation instead of effective write operations. This means that the
media content and burn_disc_get_status() stay unchanged.
Note: With stdio-drives, the target file gets eventually created, opened,
lseeked, and closed, but not written. So there are effects on it.
Warning: Call burn_random_access_write() will never do simulation because
it does not get any burn_write_opts.
@param opts The write opts to change
@param sim If non-zero, the drive will perform a simulation instead of a burn
@param sim Non-zero enables simulation, 0 enables real writing
@return Returns 1 on success and 0 on failure.
*/
int burn_write_opts_set_simulate(struct burn_write_opts *opts, int sim);
@ -1921,34 +1957,6 @@ int burn_read_data(struct burn_drive *d, off_t byte_address,
char data[], off_t data_size, off_t *data_count, int flag);
#ifdef NIX
/* ts A70903 */ /* <<< ts A70905 : to vanish from API */
/** Create and aquire a pseudo-drive which will accept option settings much
like a MMC burner drive. Many of them will not cause any effect, though.
There are two kinds of pseudo-drives: stdio-drives and null-drives.
A stdio-drive performs all its eventual data transfer activities on a file
via standard i/o functions open(2), lseek(2), read(2), write(2), close(2).
Its capabilities resemble DVD-RAM but the media profile reported is 0x00
and it issues no realistic write space information.
A null-drive is created if the parameter "name" is an empty string. It will
pretend to have loaded no media.
@param drive_infos On success returns a one element array with the drive
(cdrom/burner). Thus use with driveno 0 only. On failure
the array has no valid elements at all.
The returned array should be freed via burn_drive_info_free()
when it is no longer needed.
@param name Sets the file address to be used for writing. Permissible
file types are regular file or block device. If the file
does not exist, it is attempted to create it as regular file.
An empty fname creates a null-drive.
@return 1 success , <=0 failure
*/
int burn_drive_grab_dummy(struct burn_drive_info *drive_infos[], char *fname);
#endif /* NIX */
/** Inquire wether the drive object is a real MMC drive or a pseudo-drive
created by burn_drive_dummy().
@param d The drive to inquire