New paramaters for option modesty_on_drive= timeout_sec, min_usec, max_usec

This commit is contained in:
Thomas Schmitt 2015-08-30 18:57:44 +00:00
parent 8493a4b6c0
commit 537600e901
3 changed files with 75 additions and 15 deletions

View File

@ -2,7 +2,7 @@
.\" First parameter, NAME, should be all caps
.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
.\" other parameters are allowed: see man(7), man(1)
.TH CDRSKIN 1 "Version 1.4.1, Aug 01, 2015"
.TH CDRSKIN 1 "Version 1.4.1, Aug 30, 2015"
.\" Please adjust this date whenever revising the manpage.
.\"
.\" Some roff macros, for reference:
@ -1419,10 +1419,13 @@ With DVD-RW 32 kiB alignment is mandatory.
.br
Other media are not suitable for this option yet.
.TP
.BI modesty_on_drive= <mode>[:min_percent=<num>][:max_percent=<num>]
.BI modesty_on_drive= <mode>[:parameter=<value>[:parameter=<value>...]]
Mode 1 keeps the program from trying to write to the burner drive while its
buffer is in danger to be filled by more than max_percent. If this filling is
exceeded then the program will wait until the filling is at most min_percent.
buffer is in danger to be filled by more than parameter "max_percent".
If this filling is exceeded then the program will wait until the filling
is at most the value of parameter "min_percent".
.br
Percentages are permissible in the range of 25 to 100.
.br
This can ease the load on operating system and drive controller and thus help
with achieving better input bandwidth if disk and burner are not on independent
@ -1430,18 +1433,37 @@ controllers (like hda and hdb). Unsufficient input bandwidth is indicated by
output "(fifo xy%)" of option -v if xy is lower than 90 for some time.
modesty_on_drive= might hamper output bandwidth and cause buffer underruns.
.br
A new use case is to work around the poor simultaneous performance of multiple
burn runs on Linux kernel 3.16 and alike. Here it is not about giving the
hard disk enough time to fill the fifo, but about keeping ioctl(SG_IO) from
blocking for a longer time and thus blocking all other burn runs.
.br
To have max_percent larger than the burner's best actual
buffer fill has the same effect as min_percent==max_percent. Some burners
do not use their full buffer with all media types. Watch output "[buf xy%]"
of option -v to get an impression of the actual buffer usage. Some burners
are not suitable because they report buffer fill with granularity too large
in size or time.
in size or time, or because they go to full speed only when their buffer is
full.
.br
If a write attempt is delayed, the program will wait for a number of
microseconds which is given by parameter "min_usec" before inquiring the buffer
again. iIf more retries occur, this waiting time between inquiries increases
up to the value of parameter "max_usec".
.br
If the delay lasts longer than the number of seconds given by parameter
"timeout_sec", then mode 1 is set 0 and normal burning goes on.
.br
Mode 0 disables this feature. Mode -1 keeps it unchanged. Default is:
.br
modesty_on_drive=0:min_percent=65:max_percent=95
0:min_percent=65:max_percent=95:timeout_sec=120:
min_usec=10000:max_usec=100000
.br
Percentages are permissible in the range of 25 to 100.
The defaults of cdrskin are good for IDE problems. With concurrent Linux SG_IO
problems on modern hardware, higher min_percent and lower usec might yield
better buffer fills while still avoiding the problem:
.br
min_percent=90:max_percent=95:min_usec=5000:max_usec=25000
.PP
Alphabetical list of options which are only intended for very special
situations and not for normal use:

View File

@ -3466,6 +3466,9 @@ struct CdrskiN {
bit31 : ignore bits 0 to 30
*/
int modesty_on_drive;
int min_buffer_usec; /* The other parameters for this function */
int max_buffer_usec;
int buffer_timeout_sec;
int min_buffer_percent;
int max_buffer_percent;
@ -3677,6 +3680,9 @@ int Cdrskin_new(struct CdrskiN **skin, struct CdrpreskiN *preskin, int flag)
o->multi= 0;
o->cdxa_conversion= 0;
o->modesty_on_drive= 0;
o->buffer_timeout_sec= 120;
o->min_buffer_usec= 10000;
o->max_buffer_usec= 100000;
o->min_buffer_percent= 65;
o->max_buffer_percent= 95;
o->write_start_address= -1.0;
@ -3973,7 +3979,8 @@ int Cdrskin_adjust_speed(struct CdrskiN *skin, int flag)
burn_drive_set_speed(skin->drives[skin->driveno].drive,k_speed,k_speed);
modesty= skin->modesty_on_drive;
burn_drive_set_buffer_waiting(skin->drives[skin->driveno].drive,
modesty, -1, -1, -1,
modesty, skin->min_buffer_usec,
skin->max_buffer_usec, skin->buffer_timeout_sec,
skin->min_buffer_percent,
skin->max_buffer_percent);
return(1);
@ -8793,12 +8800,12 @@ minbuf_equals:;
} else if(strncmp(argv[i],"modesty_on_drive=",17)==0) {
value_pt= argv[i]+17;
if(*value_pt=='0') {
if(*value_pt == '0' || strncmp(value_pt, "off", 3) == 0) {
skin->modesty_on_drive= 0;
if(skin->verbosity>=Cdrskin_verbose_cmD)
ClN(printf(
"cdrskin: modesty_on_drive=0 : buffer waiting by os driver\n"));
} else if(*value_pt=='1') {
} else if(*value_pt=='1' || strncmp(value_pt, "on", 2) == 0) {
skin->modesty_on_drive= 1;
if(skin->verbosity>=Cdrskin_verbose_cmD)
ClN(printf(
@ -8826,8 +8833,10 @@ minbuf_equals:;
return(0);
}
skin->min_buffer_percent= value;
ClN(printf("cdrskin: modesty_on_drive : %d percent min buffer fill\n",
skin->min_buffer_percent));
if(skin->verbosity >= Cdrskin_verbose_cmD)
ClN(printf(
"cdrskin: modesty_on_drive : %d percent min buffer fill\n",
skin->min_buffer_percent));
} else if(strncmp(value_pt,"max_percent=",12)==0) {
sscanf(value_pt+12,"%lf",&value);
if (value<25 || value>100) {
@ -8836,8 +8845,37 @@ minbuf_equals:;
return(0);
}
skin->max_buffer_percent= value;
ClN(printf("cdrskin: modesty_on_drive : %d percent max buffer fill\n",
skin->max_buffer_percent));
if(skin->verbosity >= Cdrskin_verbose_cmD)
ClN(printf(
"cdrskin: modesty_on_drive : %d percent max buffer fill\n",
skin->max_buffer_percent));
} else if(strncmp(value_pt, "min_usec=", 9) == 0) {
sscanf(value_pt + 9, "%lf", &value);
if(value < 0)
value= 0;
skin->min_buffer_usec= value;
if(skin->verbosity >= Cdrskin_verbose_cmD)
ClN(printf(
"cdrskin: modesty_on_drive : %d microseconds minimum sleep time\n",
skin->min_buffer_usec));
} else if(strncmp(value_pt,"max_usec=", 9)==0) {
sscanf(value_pt + 9, "%lf", &value);
if(value < 0)
value= 0;
skin->max_buffer_usec= value;
if(skin->verbosity >= Cdrskin_verbose_cmD)
ClN(printf(
"cdrskin: modesty_on_drive : %d microseconds maximum sleep time\n",
skin->max_buffer_usec));
} else if(strncmp(value_pt,"timeout_sec=", 12)==0) {
sscanf(value_pt + 9, "%lf", &value);
if(value < 0)
value= 0;
skin->buffer_timeout_sec= value;
if(skin->verbosity >= Cdrskin_verbose_cmD)
ClN(printf(
"cdrskin: modesty_on_drive : %d seconds fallback timeout\n",
skin->max_buffer_usec));
} else {
fprintf(stderr,
"cdrskin: SORRY : modest_on_drive= unknown option code : %s\n",

View File

@ -1 +1 @@
#define Cdrskin_timestamP "2015.08.30.185208"
#define Cdrskin_timestamP "2015.08.30.185714"