Re-instated range "vreixo" with old and new codes, adjusted severity definitions

This commit is contained in:
Thomas Schmitt 2008-02-06 17:41:00 +00:00
parent 3abb7a6a9e
commit b6fceabc6f
2 changed files with 97 additions and 15 deletions

View File

@ -1 +1 @@
#define Cdrskin_timestamP "2008.02.04.175209"
#define Cdrskin_timestamP "2008.02.06.174009"

View File

@ -141,12 +141,17 @@ struct libdax_msgs_item;
#define LIBDAX_MSGS_SEV_WARNING 0x50000000
/** Non-fatal error messages indicating that important parts of an action
failed but processing may go on if one accepts deviations from the
desired result.
/** Non-fatal error messages indicating that parts of an action failed but
processing may go on if one accepts deviations from the desired result.
E.g.: One of several libisofs input files cannot be found.
SORRY shall also be the severity for incidents which are severe enough
for FAILURE but happen within already started irrevocable actions,
like ISO image generation. A precondition for such a severity ease is
that the action can be continued after the incident.
E.g.: A pattern yields no result.
A speed setting cannot be made.
A libisofs input file is inaccessible during image generation.
After SORRY a function should try to go on if that makes any sense
and if no threshold prescribes abort on SORRY. The function should
@ -156,15 +161,17 @@ struct libdax_msgs_item;
#define LIBDAX_MSGS_SEV_SORRY 0x60000000
/** Non-fatal error indicating that a complete action failed and that
only a thorough new setup of preconditions will give hope for success.
/** Non-fatal error indicating that an important part of an action failed and
that only a new setup of preconditions will give hope for sufficient
success.
E.g.: No media is inserted in the output drive.
No write mode can be found for inserted media.
All libisofs input files are inaccessible.
A libisofs input file is inaccessible during grafting.
After FAILURE a function should end very soon with a return value
indicating failure.
After FAILURE a function should end with a return value indicating failure.
It is at the discretion of the function whether it ends immediately in any
case or whether it tries to go on if the eventual threshold allows.
*/
#define LIBDAX_MSGS_SEV_FAILURE 0x68000000
@ -499,8 +506,80 @@ Range "scdbackup" : 0x00020000 to 0x0002ffff
------------------------------------------------------------------------------
Range "vreixo" : 0x00030000 to 0x0003ffff
This has been abandoned and may not be re-used for other purposes than
re-instating the old numbers and further extending them.
0x0003ffff (FAILURE,HIGH) = Operation canceled
0x0003fffe (FATAL,HIGH) = Unknown or unexpected fatal error
0x0003fffd (FAILURE,HIGH) = Unknown or unexpected error
0x0003fffc (FATAL,HIGH) = Internal programming error
0x0003fffb (FAILURE,HIGH) = NULL pointer where NULL not allowed
0x0003fffa (FATAL,HIGH) = Memory allocation error
0x0003fff9 (FATAL,HIGH) = Interrupted by a signal
0x0003fff8 (FAILURE,HIGH) = Invalid parameter value
0x0003fff7 (FATAL,HIGH) = Cannot create a needed thread
0x0003fff6 (FAILURE,HIGH) = Write error
0x0003fff5 (FAILURE,HIGH) = Buffer read error
0x0003ffc0 (FAILURE,HIGH) = Trying to add a node already added to another dir
0x0003ffbf (FAILURE,HIGH) = Node with same name already exist
0x0003ffbe (FAILURE,HIGH) = Trying to remove a node that was not added to dir
0x0003ffbd (FAILURE,HIGH) = A requested node does not exist
0x0003ffbc (FAILURE,HIGH) = Image already bootable
0x0003ffbb (FAILURE,HIGH) = Trying to use an invalid file as boot image
0x0003ff80 (FAILURE,HIGH) = Error on file operation
0x0003ff7f (FAILURE,HIGH) = Trying to open an already openned file
0x0003ff7e (FAILURE,HIGH) = Access to file is not allowed
0x0003ff7d (FAILURE,HIGH) = Incorrect path to file
0x0003ff7c (FAILURE,HIGH) = The file does not exist in the filesystem
0x0003ff7b (FAILURE,HIGH) = Trying to read or close a file not openned
0x0003ff7a (FAILURE,HIGH) = Directory used where no dir is expected
0x0003ff79 (FAILURE,HIGH) = File read error
0x0003ff78 (FAILURE,HIGH) = Not dir used where a dir is expected
0x0003ff77 (FAILURE,HIGH) = Not symlink used where a symlink is expected
0x0003ff76 (FAILURE,HIGH) = Cannot seek to specified location
0x0003ff75 (HINT,MEDIUM) = File not supported in ECMA-119 tree and ignored
0x0003ff74 (HINT,MEDIUM) = File bigger than supported by used standard
0x0003ff73 (SORRY,HIGH) = File read error during image creation
0x0003ff72 (HINT,MEDIUM) = Cannot convert filename to requested charset
0x0003ff71 (SORRY,HIGH) = File cannot be added to the tree
0x0003ff70 (HINT,MEDIUM) = File path breaks specification constraints
0x0003ff00 (FAILURE,HIGH) = Charset conversion error
0x0003feff (FAILURE,HIGH) = Too much files to mangle
0x0003fec0 (FAILURE,HIGH) = Wrong or damaged Primary Volume Descriptor
0x0003febf (SORRY,HIGH) = Wrong or damaged RR entry
0x0003febe (SORRY,HIGH) = Unsupported RR feature
0x0003febd (FAILURE,HIGH) = Wrong or damaged ECMA-119
0x0003febc (FAILURE,HIGH) = Unsupported ECMA-119 feature
0x0003febb (SORRY,HIGH) = Wrong or damaged El-Torito catalog
0x0003feba (SORRY,HIGH) = Unsupported El-Torito feature
0x0003feb9 (SORRY,HIGH) = Cannot patch isolinux boot image
0x0003feb8 (SORRY,HIGH) = Unsupported SUSP feature
0x0003feb7 (WARNING,HIGH) = Error on a RR entry that can be ignored
0x0003feb6 (HINT,MEDIUM) = Error on a RR entry that can be ignored
0x0003feb5 (WARNING,HIGH) = Multiple ER SUSP entries found
0x0003feb4 (HINT,MEDIUM) = Unsupported volume descriptor found
0x0003feb3 (WARNING,HIGH) = El-Torito related warning
0x0003feb2 (SORRY,HIGH) = Image write cancelled
Outdated codes which may not be re-used for other purposes than
re-instating them, if ever:
X 0x00031001 (SORRY,HIGH) = Cannot read file (ignored)
X 0x00031002 (FATAL,HIGH) = Cannot read file (operation canceled)
X 0x00031000 (FATAL,HIGH) = Unsupported ISO-9660 image
X 0x00031001 (HINT,MEDIUM) = Unsupported Vol Desc that will be ignored
X 0x00031002 (FATAL,HIGH) = Damaged ISO-9660 image
X 0x00031003 (SORRY,HIGH) = Cannot read previous image file
X 0x00030101 (HINT,MEDIUM) = Unsupported SUSP entry that will be ignored
X 0x00030102 (SORRY,HIGH) = Wrong/damaged SUSP entry
X 0x00030103 (WARNING,MEDIUM)= Multiple SUSP ER entries where found
X 0x00030111 (SORRY,HIGH) = Unsupported RR feature
X 0x00030112 (SORRY,HIGH) = Error in a Rock Ridge entry
X 0x00030201 (HINT,MEDIUM) = Unsupported Boot Vol Desc that will be ignored
X 0x00030202 (SORRY,HIGH) = Wrong El-Torito catalog
X 0x00030203 (HINT,MEDIUM) = Unsupported El-Torito feature
X 0x00030204 (SORRY,HIGH) = Invalid file to be an El-Torito image
X 0x00030205 (WARNING,MEDIUM)= Cannot properly patch isolinux image
X 0x00030206 (WARNING,MEDIUM)= Copying El-Torito from a previous image without
X enought info about it
X 0x00030301 (NOTE,MEDIUM) = Unsupported file type for Joliet tree
------------------------------------------------------------------------------
@ -519,15 +598,18 @@ Range "application" : 0x00040000 to 0x0004ffff
------------------------------------------------------------------------------
Range "libisofs-xorriso" : 0x00050000 to 0x0005ffff
This is the representation of libisofs.so.6 error codes in xorriso.
Other applications are invited to map the output of ISO_ERR_CODE(e)
into the same range of numbers.
This is an alternative representation of libisofs.so.6 error codes in xorriso.
If values returned by iso_error_get_code() do not fit into 0x30000 to 0x3ffff
then they get truncated to 16 bit and mapped into this range.
(This should never need to happen, of course.)
------------------------------------------------------------------------------
Range "libisoburn" : 0x00060000 to 0x00006ffff
0x00060000 (*,*) : Message which shall be attributed to libisoburn
>>> the messages of libisoburn need to be registered individually
------------------------------------------------------------------------------