Changed URLs and umbrella names to libburnia

This commit is contained in:
Thomas Schmitt 2006-12-03 15:56:27 +00:00
parent 1645d97d73
commit d966278777
7 changed files with 49 additions and 48 deletions

View File

@ -1,10 +1,10 @@
------------------------------------------------------------------------------
libburn.pykix.org
libburnia.pykix.org
------------------------------------------------------------------------------
This all is under GPL.
(See GPL reference, our clarification and commitment at the end of this text)
------------------------------------------------------------------------------
libburn.pykix.org
libburnia.pykix.org
By Mario Danic <mario.danic@gmail.com> and Thomas Schmitt <scdbackup@gmx.net>
Copyright (C) 2006 Mario Danic, Thomas Schmitt
@ -12,14 +12,14 @@ Still containing parts of
Libburn. By Derek Foreman <derek@signalmarketing.com> and
Ben Jansens <xor@orodu.net>
Copyright (C) 2002-2006 Derek Foreman and Ben Jansens
These parts are to be replaced by own code of above libburn.pykix.org-copyright
holders and then libburn.pykix.org is to be their sole copyright.
These parts are to be replaced by own code of above libburnia.pykix.org
copyright holders and then libburnia.pykix.org is to be their sole copyright.
This is done to achieve the right to issue the clarification and the
commitment as written at the end of this text.
The rights and merits of the Libburn-copyright holders Derek Foreman and
Ben Jansens will be duely respected.
This libburn.pykix.org toplevel README (C) 2006 Thomas Schmitt
This libburnia.pykix.org toplevel README (C) 2006 Thomas Schmitt
------------------------------------------------------------------------------
Build and Installation
@ -27,14 +27,14 @@ This libburn.pykix.org toplevel README (C) 2006 Thomas Schmitt
Our build system is based on autotools. For preparing the build of a SVN
snapshot you will need autotools of at least version 1.7.
Check out from SVN by
svn co http://libburn-svn.pykix.org/libburn/trunk libburn_pykix
svn co http://libburnia-svn.pykix.org/libburn/trunk libburn_pykix
go into directory libburn_pykix and apply autotools by
./bootstrap
Alternatively you may unpack a release tarball for which you do not need
autotools installed.
To build libburn.pykix.org and its subprojects it should be sufficient to go
To build a libburnia.pykix.org subproject it should be sufficient to go
into its toplevel directory (here: "libburn_pykix") and execute
./configure
make
@ -43,18 +43,18 @@ To make the libraries accessible for running resp. developing applications
make install
The other half of the project, libisofs, is hosted in the libburn SVN, too:
svn co http://libburn-svn.pykix.org/libisofs/trunk libisofs_pykix
The other half of the project, libisofs, is hosted in the libburnia SVN, too:
svn co http://libburnia-svn.pykix.org/libisofs/trunk libisofs_pykix
See README file there.
------------------------------------------------------------------------------
Overview of libburn.pykix.org
Overview of libburnia.pykix.org
libburn.pykix.org is an open-source software project for reading, mastering and
writing optical discs. For now this means only CD-R and CD-RW.
libburnia.pykix.org is an open-source software project for reading, mastering
and writing optical discs. For now this means only CD-R and CD-RW.
The project comprises of several more or less interdependent parts which
together strive to be a usable foundation for application development.
@ -70,7 +70,7 @@ We do have a workable code base for burning data CDs, though. The burn API is
quite comprehensively documented and can be used to build a presentable
application.
We do have a functional binary which emulates parts of cdrecord in order to
prove that usability, and in order to allow you to explore libburn's scope
prove that usability, and in order to allow you to explore libburnia's scope
by help of existing cdrecord frontends.
The project components (list subject to growth, hopefully):
@ -197,9 +197,9 @@ Project history as far as known to me:
------------------------------------------------------------------------------
Clarification in my name and in the name of Mario Danic, upcoming copyright
holders on toplevel of libburn. To be fully in effect after the remaining other
copyrighted code has been replaced by ours and by copyright-free contributions
of our friends:
holders on toplevel of libburnia. To be fully in effect after the remaining
other copyrighted code has been replaced by ours and by copyright-free
contributions of our friends:
------------------------------------------------------------------------------
We, the copyright holders, agree on the interpretation that

View File

@ -1,5 +1,5 @@
------------------------------------------------------------------------------
libburn.pykix.org scdbackup.sourceforge.net/cdrskin_eng.html
libburnia.pykix.org scdbackup.sourceforge.net/cdrskin_eng.html
------------------------------------------------------------------------------
Installation instructions at about line 60. First the legal stuff:
------------------------------------------------------------------------------
@ -7,24 +7,24 @@ This all is under GPL.
(See GPL reference, our clarification and commitment at the end of this text)
------------------------------------------------------------------------------
Based on and sub project of:
libburn.pykix.org
libburnia.pykix.org
By Mario Danic <mario.danic@gmail.com> and Thomas Schmitt <scdbackup@gmx.net>
Copyright (C) 2006 Mario Danic, Thomas Schmitt
libburn.pykix.org is inspired by and in other components still containing
libburnia.pykix.org is inspired by and in other components still containing
parts of
Libburn. By Derek Foreman <derek@signalmarketing.com> and
Ben Jansens <xor@orodu.net>
Copyright (C) 2002-2006 Derek Foreman and Ben Jansens
See toplevel README for an overview of the current copyright situation in
libburn.pykix.org.
libburnia.pykix.org.
------------------------------------------------------------------------------
My thanks to the above authors (except myself, of course) for making the
following possible.
cdrskin. By Thomas Schmitt <scdbackup@gmx.net>
Integrated sub project of libburn.pykix.org but also published via:
Integrated sub project of libburnia.pykix.org but also published via:
http://scdbackup.sourceforge.net/cdrskin_eng.html
http://scdbackup.sourceforge.net/cdrskin-0.2.7.tar.gz
Copyright (C) 2006 Thomas Schmitt
@ -64,7 +64,7 @@ Obtain cdrskin-0.2.7.tar.gz, take it to a directory of your choice and do:
tar xzf cdrskin-0.2.7.tar.gz
cd cdrskin-0.2.7
Or obtain a libburn.pykix.org SVN snapshot,
Or obtain a libburnia.pykix.org SVN snapshot,
go into the toplevel directory of the snapshot (e.g. cd libburn_pykix ),
and execute the autotools script ./bootstrap . Use autools version >= 1.7 .

View File

@ -77,8 +77,9 @@ restart of libburn.
------------------------------------------------------------------------------
This program is currently copyright Thomas Schmitt only.
The copyrights of several components of libburn.pykix.org are willfully tangled
at toplevel to form an irrevocable commitment to true open source spirit.
The copyrights of several components of libburnia.pykix.org are willfully
tangled at toplevel to form an irrevocable commitment to true open source
spirit.
We have chosen the GPL for legal compatibility and clearly express that it
shall not hamper the use of our software by non-GPL applications which show
otherwise the due respect to the open source community.
@ -91,7 +92,7 @@ usage in due open source spirit will be made possible somehow and in the
particular special case. I will not raise public protest if you spawn yourself
a BSD license from an (outdated) cdrskin.c which still bears that old promise.
Note that this extended commitment is valid only for cdrskin.[ch],
cdrfifo.[ch] and cleanup.[ch], but not for libburn.pykix.org as a whole.
cdrfifo.[ch] and cleanup.[ch], but not for libburnia.pykix.org as a whole.
cdrskin is originally inspired by libburn-0.2/test/burniso.c :
(c) Derek Foreman <derek@signalmarketing.com> and Ben Jansens <xor@orodu.net>
@ -243,7 +244,7 @@ or
#define Cdrskin_is_erasable_on_load_is_brokeN 1
#endif
/** http://libburn.pykix.org/ticket/41 reports of big trouble without
/** http://libburnia.pykix.org/ticket/41 reports of big trouble without
padding any track to a full sector
*/
#define Cdrskin_all_tracks_with_sector_paD 1
@ -2028,7 +2029,7 @@ set_dev:;
"used as track source. If it is \"-\" then stdin is used.\n");
printf("cdrskin : http://scdbackup.sourceforge.net/cdrskin_eng.html\n");
printf(" mailto:scdbackup@gmx.net (Thomas Schmitt)\n");
printf("libburn : http://libburn.pykix.org\n");
printf("libburn : http://libburnia.pykix.org\n");
printf("cdrecord : ftp://ftp.berlios.de/pub/cdrecord/\n");
printf("My respect to the authors of cdrecord and libburn.\n");
printf("scdbackup: http://scdbackup.sourceforge.net/main_eng.html\n");
@ -2165,7 +2166,7 @@ set_severities:;
} else if(strcmp(argv[i],"-version")==0) {
printf(
"Cdrecord 2.01-Emulation Copyright (C) 2006, see libburn.pykix.org\n");
"Cdrecord 2.01-Emulation Copyright (C) 2006, see libburnia.pykix.org\n");
printf("libburn version : %s\n",Cdrskin_libburn_versioN);
#ifndef Cdrskin_extra_leaN

View File

@ -2,7 +2,7 @@
<HEAD>
<META NAME="description" CONTENT="cdrskin, a limited cdrecord compatibility wrapper for libburn">
<META NAME="keywords" CONTENT="cdrskin, libburn, burn, CD, linux, CDR, CD-R, CDRW, CD-RW, cdrecord, compatible, scdbackup, burning">
<META NAME="keywords" CONTENT="cdrskin, libburn, libburnia, burn, CD, linux, CDR, CD-R, CDRW, CD-RW, cdrecord, compatible, scdbackup, burning">
<META NAME="robots" CONTENT="follow">
<TITLE>cdrskin homepage english</TITLE>
</HEAD>
@ -12,7 +12,7 @@
<CENTER>
<A HREF="http://en.wikipedia.org/wiki/D%C3%B6ner_kebab">
<IMG SRC="doener_150x200_tr_octx.gif" BORDER=0>
<IMG SRC="doener_150x200_tr_octx.gif" BORDER=0 ALT="D&ouml;ner mit Scharf">
</A>
<P><H2> Homepage of </H2>
<H1> cdrskin </H1>
@ -34,7 +34,7 @@
<P>
<H2>Hardware requirements:</H2>
A CD recorder suitable for
<A HREF="http://libburn.pykix.org">libburn.pykix.org</A>
<A HREF="http://libburnia.pykix.org">libburnia.pykix.org</A>
(SCSI or IDE/ATAPI writers compliant to mmc-3 standard).
<BR>
</P>
@ -56,7 +56,7 @@ GPL software included:<BR>
</H2>
<DL>
<DT>libburn-0.2.6</DT>
<DD>(by Derek Foreman, Ben Jansens, and team of libburn.pykix.org)</DD>
<DD>(by Derek Foreman, Ben Jansens, and team of libburnia.pykix.org)</DD>
<DD>transfers data to CD</DD>
</DL>
</P>
@ -227,8 +227,8 @@ Enhancements towards previous stable version cdrskin-0.2.4:
<DD><A HREF="cdrskin_help_devel">cdrskin_0.2.7 -help</A></DD>
<DD>&nbsp;</DD>
<DT>Maintainers of cdrskin unstable packages please use SVN of
<A HREF="http://libburn.pykix.org"> libburn.pykix.org</A></DT>
<DD>Download: <KBD><B>svn co http://libburn-svn.pykix.org/libburn/trunk libburn_pykix</B>
<A HREF="http://libburnia.pykix.org"> libburnia.pykix.org</A></DT>
<DD>Download: <KBD><B>svn co http://libburnia-svn.pykix.org/libburn/trunk libburn_pykix</B>
</KBD></DD>
<DD>Build: <KBD><B>cd libburn_pykix ; ./bootstrap ; ./configure ; make</B>
</KBD></DD>
@ -377,10 +377,11 @@ the gestures necessary for their cdrecord applications.
Contact me. Let's see what we can achieve.
<BR>
<BR>
I am aware that libburn and cdrskin still have way to go until you can simply
install cdrskin as cdrecord and may expect any application to run with it.
Currently i do not encourage this approach, but of course such a replacement
opportunity is the long term goal of a cdrecord compatibility wrapper.
libburn and cdrskin are now mature enough to substitute cdrecord in its
major use cases of CD burning. It is possible to foist cdrskin on various
software packages if it gets falsely named "cdrecord".
I do not encourage this approach, but of course such a replacement
opportunity is the goal of a cdrecord compatibility wrapper.
<BR>
<BR>
It is very important to me that this project is not perceived as hostile
@ -395,9 +396,8 @@ I owe him much. For cdrecord, for mkisofs, for star. Chapeau.
<BR><BR>
-->
<A HREF="http://en.wikipedia.org/wiki/D%C3%B6ner_kebab">
<IMG SRC="doener_150x200_tr.gif" BORDER=0>
<IMG SRC="doener_150x200_tr.gif" BORDER=0 ALT="cdrskin - D&ouml;ner mit Scharf">
</A>
<P><H2> Homepage of </H2>
<BR><BR>
<FONT SIZE=+0>Enjoying free Open Source hosting by <A HREF="http://www.webframe.org">www.webframe.org</A><BR>
<A HREF="http://www.webframe.org">

View File

@ -1 +1 @@
#define Cdrskin_timestamP "2006.12.02.201529"
#define Cdrskin_timestamP "2006.12.03.155703"

View File

@ -1,11 +1,11 @@
/**
@author Mario Danic, Thomas Schmitt
@mainpage Libburn Documentation Index
@mainpage Libburnia Documentation Index
@section intro Introduction
Libburn is an open-source library for reading, mastering and writing
Libburnia is an open-source project for reading, mastering and writing
optical discs. For now this means only CD-R and CD-RW.
The project comprises of several more or less interdependent parts which
@ -84,7 +84,7 @@ It can list the available devices, can blank a CD-RW and
can burn to CD-R or CD-RW.
It's main purpose, nevertheless, is to show you how to use libburn and also
to serve the libburn team as reference application. libburner does indeed
to serve the libburnia team as reference application. libburner does indeed
define the standard way how above three gestures can be implemented and
stay upward compatible for a good while.

View File

@ -7,10 +7,10 @@
/** Overview
libburner is a minimal demo application for the library libburn as provided
on http://libburn.pykix.org . It can list the available devices, can
on http://libburnia.pykix.org . It can list the available devices, can
blank a CD-RW and can burn to CD-R or CD-RW.
It's main purpose, nevertheless, is to show you how to use libburn and also
to serve the libburn team as reference application. libburner.c does indeed
to serve the libburnia team as reference application. libburner.c does indeed
define the standard way how above three gestures can be implemented and
stay upward compatible for a good while.
@ -563,7 +563,7 @@ int main(int argc, char **argv)
if (ret)
exit(ret);
printf("Initializing libburn.pykix.org ...\n");
printf("Initializing libburnia.pykix.org ...\n");
if (burn_initialize())
printf("Done\n");
else {
@ -624,7 +624,7 @@ Be also invited to study the code of cdrskin/cdrskin.c et al.
Clarification in my name and in the name of Mario Danic, copyright holder
on toplevel of libburn. To be fully in effect after the remaining other
on toplevel of libburnia. To be fully in effect after the remaining other
copyrighted code has been replaced by ours and by copyright-free contributions
of our friends: