Enabled DVD-R/DL Sequential via burn_allow_untested_profiles()

ZeroThreeEight
Thomas Schmitt 16 years ago
parent 0ddeb01502
commit 2e361e50ed
  1. 2
      cdrskin/cdrskin_timestamp.h
  2. 21
      doc/cookbook.txt
  3. 5
      libburn/drive.c
  4. 13
      libburn/libburn.h
  5. 24
      libburn/mmc.c
  6. 41
      libburn/write.c

@ -1 +1 @@
#define Cdrskin_timestamP "2007.02.22.113016"
#define Cdrskin_timestamP "2007.02.23.190937"

@ -689,6 +689,7 @@ Media type can be recognized by Current Profile from 46h GET CONFIGURATION.
DVD-R 0011h
DVD-RW Restricted Overwrite 0013h
DVD-RW Sequential Recording 0014h
(DVD-R/DL Sequential Recording 0015h untested, might be single-session only)
There are two approaches for writing to sequential DVD-R[W]: DAO and
Incremental. Not all media and drives offer Incremental which allows
@ -701,6 +702,7 @@ track and it demands an exactly predicted track size.
- DAO writing
- Obtaining DVD-R[W] multi-session info for extending ISO-9660 filesystems
- Obtaining a Table Of Content from DVD-R[W]
- Hearsay about DVD-R/DL (Dual Layer)
-------------------------------------------------------------------------------
About overwriteable, blank, appendable and finalized DVD-R[W] media :
@ -962,5 +964,24 @@ model. Their start address is computed from the start and size of the last
track of the session.
-------------------------------------------------------------------------------
Hearsay about DVD-R/DL (Dual Layer) :
DVD-R/DL can assume profile 0015h DVD-R Dual Layer Sequential which is supposed
to behave like DVD-R or 0016h DVD-R Dual Layer Jump which has no counterpart
with DVD-R.
A half-sentence in mmc5r03c.pdf 6.3.3.3.3 might indicate that closing a session
by 5Bh CLOSE TRACK SESSION Close Function 010b overrides the multi-session bits
in mode page 5.
growisofs applies this function in case of not DAO, though. A comment in
growisofs_mmc.cpp states: "// DVD-R DL Seq has no notion of multi-session".
I am not reading this from the specs - but not explicitely the contrary either.
For now libburn will close the session but there is a macro prepared in
libburn/write.c Libburn_dvd_r_dl_multi_no_close_sessioN which will suppress
close session if multi-session is demanded.
-------------------------------------------------------------------------------

@ -1641,8 +1641,9 @@ int burn_disc_get_multi_caps(struct burn_drive *d, enum burn_write_types wt,
}
if (wt == BURN_WRITE_RAW)
o->multi_session = o->multi_track = 0;
} else if (d->current_profile == 0x11 || d->current_profile == 0x14) {
/* DVD-R , sequential DVD-RW */
} else if (d->current_profile == 0x11 || d->current_profile == 0x14 ||
d->current_profile == 0x15) {
/* DVD-R , sequential DVD-RW , DVD-R/DL Sequential */
if (s == BURN_DISC_BLANK) {
o->might_do_sao = 1;
o->advised_write_mode = BURN_WRITE_SAO;

@ -589,6 +589,19 @@ void burn_set_verbosity(int level);
void burn_preset_device_open(int exclusive, int blocking, int abort_on_busy);
/* ts A70223 */
/** Allows the use of media types which are implemented in libburn but not yet
tested. The list of those untested profiles is subject to change.
Currently it contains: 0x15 "DVD-R/DL Sequential".
If you really test such media, then please report the outcome on
libburn-hackers@pykix.org
If ever then this call should be done soon after burn_initialize() before
any drive scanning.
@param yes 1=allow all implemented profiles, 0=only tested media (default)
*/
void burn_allow_untested_profiles(int yes);
/* ts A60823 */
/** Aquire a drive with known persistent address.This is the sysadmin friendly
way to open one drive and to leave all others untouched. It bundles

@ -21,6 +21,10 @@
#include "options.h"
/* ts A70223 : in init.c */
extern int burn_support_untested_profiles;
#ifdef Libburn_log_in_and_out_streaM
/* <<< ts A61031 */
#include <sys/types.h>
@ -252,7 +256,8 @@ int mmc_read_track_info(struct burn_drive *d, int trackno, struct buffer *buf)
trackno = 1;
else if (d->current_profile == 0x10 ||
d->current_profile == 0x11 ||
d->current_profile == 0x14)
d->current_profile == 0x14 ||
d->current_profile == 0x15)
/* DVD-ROM , DVD-R[W] Sequential */
trackno = d->last_track_no;
else /* mmc5r03c.pdf: valid only for CD, DVD+R, DVD+R DL */
@ -287,7 +292,8 @@ int mmc_get_nwa(struct burn_drive *d, int trackno, int *lba, int *nwa)
trackno = 1;
else if (d->current_profile == 0x10 ||
d->current_profile == 0x11 ||
d->current_profile == 0x14)
d->current_profile == 0x14 ||
d->current_profile == 0x15)
/* DVD-ROM, DVD-R[W] Sequential */
trackno = d->last_track_no;
else /* mmc5r03c.pdf: valid only for CD, DVD+R, DVD+R DL */
@ -1552,6 +1558,8 @@ void mmc_get_configuration(struct burn_drive *d)
#ifdef Libburn_support_dvd_r_seQ
if (cp == 0x10 || cp == 0x11 || cp == 0x14) /* DVD-ROM,DVD-R,DVD-RW */
d->current_is_supported_profile = 1;
if (cp == 0x15 && burn_support_untested_profiles) /* DVD-R/DL */
d->current_is_supported_profile = 1;
#endif
/* Enable this to get loud and repeated reports about the feature set :
@ -2251,7 +2259,7 @@ int mmc_setup_drive(struct burn_drive *d)
d->start_lba = -2000000000;
d->end_lba = -2000000000;
/* ts A61201 - A70128 */
/* ts A61201 - A70223*/
d->erasable = 0;
d->current_profile = -1;
d->current_profile_text[0] = 0;
@ -2298,9 +2306,10 @@ int mmc_compose_mode_page_5(struct burn_drive *d,
/* Link size dummy */
pd[5] = 0;
} else if ((d->current_profile == 0x14 || d->current_profile == 0x11)
} else if ((d->current_profile == 0x14 || d->current_profile == 0x11 ||
d->current_profile == 0x15)
&& o->write_type == BURN_WRITE_SAO) {
/* ts A70205 : DVD-R[W} : Disc-at-once, DAO */
/* ts A70205 : DVD-R[W][/DL] : Disc-at-once, DAO */
/* Learned from dvd+rw-tools and mmc5r03c.pdf .
See doc/cookbook.txt for more detailed references. */
@ -2313,8 +2322,9 @@ int mmc_compose_mode_page_5(struct burn_drive *d,
/* Data Block Type = 8 */
pd[4] = 8;
} else if (d->current_profile == 0x14 || d->current_profile == 0x11) {
/* ts A70128 : DVD-R[W] Incremental Streaming */
} else if (d->current_profile == 0x14 || d->current_profile == 0x11 ||
d->current_profile == 0x15) {
/* ts A70128 : DVD-R[W][/DL] Incremental Streaming */
/* Learned from transport.hxx : page05_setup()
and mmc5r03c.pdf 7.5, 4.2.3.4 Table 17
and spc3r23.pdf 6.8, 7.4.3 */

@ -6,6 +6,16 @@
/* ts A61009 */
/* #include <a ssert.h> */
/* mmc5r03c.pdf 6.3.3.3.3: DVD-R DL: Close Function 010b: Close Session
"When the recording mode is Incremental Recording,
the disc is single session."
Enable this macro to get away from growisofs which uses Close Session
but also states "// DVD-R DL Seq has no notion of multi-session".
#define Libburn_dvd_r_dl_multi_no_close_sessioN 1
*/
/* ts A61106 : Deliberate defect provocation macros
DO NOT DEFINE THESE IF YOU WANT SUCCESSFUL TAO !
@ -969,8 +979,9 @@ int burn_dvd_write_track(struct burn_write_opts *o,
/* ts A70213 : eventually expand size of track to max */
burn_track_apply_fillup(t, d->media_capacity_remaining, 0);
if (d->current_profile == 0x11 || d->current_profile == 0x14) {
/* DVD-R, DVD-RW Sequential */
if (d->current_profile == 0x11 || d->current_profile == 0x14 ||
d->current_profile == 0x15) {
/* DVD-R, DVD-RW Sequential, DVD-R/DL Sequential */
ret = burn_disc_open_track_dvd_minus_r(o, s, tnum);
if (ret <= 0)
goto ex;
@ -1030,8 +1041,9 @@ int burn_dvd_write_track(struct burn_write_opts *o,
is_flushed = 1;
/* Eventually finalize track */
if (d->current_profile == 0x11 || d->current_profile == 0x14) {
/* DVD-R, DVD-RW Sequential */
if (d->current_profile == 0x11 || d->current_profile == 0x14 ||
d->current_profile == 0x15) {
/* DVD-R, DVD-RW Sequential, DVD-R/DL Sequential */
ret = burn_disc_close_track_dvd_minus_r(o, s, tnum);
if (ret != 2)
goto ex;
@ -1083,7 +1095,7 @@ int burn_disc_close_session_dvd_minus_rw(struct burn_write_opts *o,
}
/* ts A70129 : for profile 0x11 DVD-R and 0x14 DVD-RW Sequential */
/* ts A70129 : for profile 0x11 DVD-R, 0x14 DVD-RW Seq, 0x15 DVD-R/DL Seq */
int burn_disc_close_session_dvd_minus_r(struct burn_write_opts *o,
struct burn_session *s)
{
@ -1093,6 +1105,11 @@ int burn_disc_close_session_dvd_minus_r(struct burn_write_opts *o,
if (o->write_type != BURN_WRITE_TAO)
return 2;
#ifdef Libburn_dvd_r_dl_multi_no_close_sessioN
if (d->current_profile == 0x15 && o->multi)
return 2;
#endif
libdax_msgs_submit(libdax_messenger, o->drive->global_index,0x00020119,
LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_HIGH,
"Closing session", 0, 0);
@ -1118,8 +1135,9 @@ int burn_dvd_write_session(struct burn_write_opts *o,
if (ret <= 0)
break;
}
if ((d->current_profile == 0x11 || d->current_profile == 0x14)) {
/* DVD-R , DVD-RW Sequential */
if (d->current_profile == 0x11 || d->current_profile == 0x14 ||
d->current_profile == 0x15) {
/* DVD-R , DVD-RW Sequential, DVD-R/DL Sequential */
ret = burn_disc_close_session_dvd_minus_r(o, s);
if (ret <= 0)
return 0;
@ -1287,7 +1305,9 @@ int burn_precheck_write(struct burn_write_opts *o, struct burn_disc *disc,
if (o->start_byte >= 0 && (o->start_byte % 32768))
strcat(reasons,
"write start address not properly aligned to 32k, ");
} else if (d->current_profile == 0x11 || d->current_profile == 0x14) {
} else if (d->current_profile == 0x11 || d->current_profile == 0x14 ||
d->current_profile == 0x15) {
/* DVD-R* Sequential */
if (o->start_byte >= 0)
strcat(reasons, "write start address not supported, ");
} else {
@ -1433,8 +1453,9 @@ int burn_dvd_write_sync(struct burn_write_opts *o,
/* _Rigid_ Restricted Overwrite demands this */
o->obs_pad = 1; /* fill-up track's last 32k buffer */
} else if (d->current_profile == 0x11 || d->current_profile == 0x14) {
/* DVD-R , DVD-RW Sequential */
} else if (d->current_profile == 0x11 || d->current_profile == 0x14 ||
d->current_profile == 0x15) {
/* DVD-R , DVD-RW Sequential , DVD-R/DL Sequential */
t = disc->session[0]->track[0];
o_end = ( burn_track_is_open_ended(t) && !o->fill_up_media );
default_size = burn_track_get_default_size(t);

Loading…
Cancel
Save