Commit 616454c7 authored by Thomas Schmitt's avatar Thomas Schmitt

Made support for DVD+R DL official, enabled untested support for BD-RE

parent ea6957ef
......@@ -16,8 +16,8 @@
.\" .sp <n> insert n+1 empty lines
.\" for manpage-specific macros, see man(7)
.SH NAME
cdrskin \- burns preformatted data to CD-R[W], DVD-R[W], DVD+R[W], DVD-RAM
via libburn.
cdrskin \- burns preformatted data to CD-R[W], DVD-R[W], DVD+R[W], DVD+R/DL,
DVD-RAM via libburn.
.SH SYNOPSIS
.B cdrskin
.RI [ options | track_source_addresses ]
......@@ -44,7 +44,7 @@ or in Session at Once mode for seamless tracks.
.br
Multi session on CD (follow-up sessions in TAO only)
.br
or on DVD-R[W] (in Incremental mode) or on DVD+R.
or on DVD-R[W] (in Incremental mode) or on DVD+R[/DL].
.br
Single session on DVD-RW or DVD-R (Disk-at-once).
.br
......@@ -163,7 +163,7 @@ Multiple cycles of blanking and overwriting with random numbers might be.
.SS
.B Sequentially Recordable DVD Media:
.br
Currently DVD-RW, DVD-R and DVD+R can be used for the Sequential recording
Currently DVD-RW, DVD-R and DVD+R[/DL] can be used for the Sequential recording
model.
.br
DVD-RW must be in state "Sequential Recording".
......@@ -198,9 +198,9 @@ unpredicted length and to keep media appendable by option
The only restriction towards CD-R[W] is the lack of support for -audio tracks.
Multiple tracks per session are permissible.
.br
The write modes for DVD+R resemble those with DVD-R except that with DVD+R
The write modes for DVD+R[/DL] resemble those with DVD-R except that with +R
each track gets wrapped in an own session. There is no -dummy writing with
DVD+R.
DVD+R[/DL].
.br
Quite deliberately write mode -sao insists in the tradition of a predicted
track size and blank media, whereas -tao writes the tracks open ended and
......@@ -598,7 +598,7 @@ One should use it only if inavoidable.
.TP
.BI \-sao
Write CD in Session At Once mode, a sequential DVD-R[W] in Disc-at-once
(DAO) mode, or a DVD+R.
(DAO) mode, or a DVD+R[/DL].
.br
With CD this mode is able to put several audio tracks on media without
producing audible gaps between them.
......@@ -606,8 +606,8 @@ producing audible gaps between them.
With DVD-R[W] this mode can only write a single track.
No -multi is allowed with DVD-R[W] -sao.
.br
-sao is permissible with overwriteable DVD and with DVD+R but actually only
imposes restrictions without providing known advantages.
-sao is permissible with overwriteable DVD and with DVD+R[/DL] but actually
only imposes restrictions without providing known advantages.
.br
-sao can only be used for tracks of fixely predicted size. This implies that
track arguments which depict stdin or named pipes need to be preceeded by
......@@ -647,7 +647,7 @@ suffix ".wav".
.TP
.BI \-tao
Write CD in Track At Once (TAO) mode, sequential DVD-R[W] in Incremental
Streaming mode, or DVD+R without traditional -sao restrictions.
Streaming mode, or DVD+R[/DL] without traditional -sao restrictions.
This mode also applies pro-forma to overwriteable DVD media.
.br
Mode -tao can be used with track sources of unpredictable size, like standard
......@@ -951,7 +951,7 @@ tested. Currently this applies to :
.br
Profile 0015h , DVD-R/DL Sequential (will not allow -multi).
.br
Profile 002Bh , DVD+R/DL.
Profile 0043h , BD-RE.
.br
If you really test such media, then please report the outcome on
libburn-hackers@pykix.org
......@@ -1131,7 +1131,7 @@ cdrskin -v dev=0,1,0 fs=32m speed=8 \\
.br
-tao padsize=300k -
.SS
.B Write multi-session to the same CD, DVD-R[W] or DVD+R:
.B Write multi-session to the same CD, DVD-R[W] or DVD+R[/DL]:
.br
cdrskin dev=/dev/hdc -v padsize=300k -multi -tao 1.iso
.br
......
#define Cdrskin_timestamP "2008.02.22.213726"
#define Cdrskin_timestamP "2008.02.28.123152"
......@@ -730,7 +730,7 @@ void burn_preset_device_open(int exclusive, int blocking, int abort_on_busy);
/** Allows the use of media types which are implemented in libburn but not yet
tested. The list of those untested profiles is subject to change.
Currently it contains: 0x15 "DVD-R/DL sequential recording",
0x2b "DVD+R/DL"
0x43 "BD-RE"
If you really test such media, then please report the outcome on
libburn-hackers@pykix.org
If ever then this call should be done soon after burn_initialize() before
......@@ -1093,10 +1093,11 @@ off_t burn_disc_available_space(struct burn_drive *d,
0x09 "CD-R", 0x0a "CD-RW",
0x11 "DVD-R sequential recording", 0x12 "DVD-RAM",
0x13 "DVD-RW restricted overwrite", 0x14 "DVD-RW sequential recording",
0x1a "DVD+RW", 0x1b "DVD+R".
0x1a "DVD+RW", 0x1b "DVD+R"
0x2b "DVD+R/DL"
If enabled by burn_allow_untested_profiles() it also writes to profiles
0x15 "DVD-R/DL sequential recording", 0x2b "DVD+R/DL".
Writeable stdio-drives return this profile
0x15 "DVD-R/DL sequential recording", 0x43 "BD-RE".
Writeable stdio-drives return this profile:
0xffff "stdio file"
@param d The drive where the media is inserted.
@param pno Profile Number as of mmc5r03c.pdf, table 89
......
......@@ -306,8 +306,9 @@ int mmc_read_track_info(struct burn_drive *d, int trackno, struct buffer *buf,
c.opcode[1] = 1;
if(trackno<=0) {
if (d->current_profile == 0x1a || d->current_profile == 0x13 ||
d->current_profile == 0x12 )
/* DVD+RW , DVD-RW restricted overwrite , DVD-RAM */
d->current_profile == 0x12 || d->current_profile == 0x43)
/* DVD+RW , DVD-RW restricted overwrite , DVD-RAM
BD-RE */
trackno = 1;
else if (d->current_profile == 0x10 ||
d->current_profile == 0x11 ||
......@@ -349,7 +350,7 @@ int mmc_get_nwa(struct burn_drive *d, int trackno, int *lba, int *nwa)
*nwa = mmc_four_char_to_int(data + 12);
num = mmc_four_char_to_int(data + 16);
if (d->current_profile == 0x1a || d->current_profile == 0x13 ||
d->current_profile == 0x12) {
d->current_profile == 0x12 || d->current_profile == 0x43) {
/* overwriteable */
*lba = *nwa = num = 0;
} else if (!(data[7]&1)) {
......@@ -1490,7 +1491,7 @@ static int mmc_read_disc_info_al(struct burn_drive *d, int *alloc_len)
ts A70112 : same for DVD-RAM
*/
if (d->current_profile == 0x1a || d->current_profile == 0x13 ||
d->current_profile == 0x12)
d->current_profile == 0x12 || d->current_profile == 0x43)
d->status = BURN_DISC_BLANK;
if (d->status == BURN_DISC_BLANK) {
......@@ -2104,7 +2105,8 @@ static int mmc_get_configuration_al(struct burn_drive *d, int *alloc_len)
d->current_is_supported_profile = 1;
#endif
#ifdef Libburn_support_dvd_raM
if (cp == 0x12)
if (cp == 0x12 || (cp == 0x43 && burn_support_untested_profiles))
/* DVD-RAM , BD-RE */
d->current_is_supported_profile = 1;
#endif
#ifdef Libburn_support_dvd_r_seQ
......@@ -2114,8 +2116,7 @@ static int mmc_get_configuration_al(struct burn_drive *d, int *alloc_len)
d->current_is_supported_profile = 1;
#endif
#ifdef Libburn_support_dvd_plus_R
if (cp == 0x1b || (cp == 0x2b && burn_support_untested_profiles))
/* DVD+R , DVD+R/DL */
if (cp == 0x1b || cp == 0x2b) /* DVD+R , DVD+R/DL */
d->current_is_supported_profile = 1;
#endif
......@@ -3004,8 +3005,9 @@ int mmc_compose_mode_page_5(struct burn_drive *d,
pd[13] = 16;
} else if (d->current_profile == 0x1a || d->current_profile == 0x1b ||
d->current_profile == 0x2b || d->current_profile == 0x12) {
/* not with DVD+R[W][/DL] or DVD-RAM */;
d->current_profile == 0x2b || d->current_profile == 0x12 ||
d->current_profile == 0x43) {
/* not with DVD+R[W][/DL] or DVD-RAM or BD-RE */;
return 0;
} else {
/* Traditional setup for CD */
......
......@@ -580,7 +580,7 @@ void spc_sense_write_params(struct burn_drive *d)
/* ts A70212 : try to setup d->media_capacity_remaining */
if (d->current_profile == 0x1a || d->current_profile == 0x13 ||
d->current_profile == 0x12)
d->current_profile == 0x12 || d->current_profile == 0x43)
d->read_format_capacities(d, -1);
else if (d->status == BURN_DISC_BLANK ||
(d->current_is_cd_profile && d->status == BURN_DISC_APPENDABLE)) {
......
......@@ -967,8 +967,9 @@ int burn_precheck_write(struct burn_write_opts *o, struct burn_disc *disc,
if (d->status == BURN_DISC_UNSUITABLE)
goto unsuitable_profile;
if (d->drive_role == 2 ||
d->current_profile == 0x1a || d->current_profile == 0x12) {
/* DVD+RW , DVD-RAM , emulated drive on stdio file */
d->current_profile == 0x1a || d->current_profile == 0x12 ||
d->current_profile == 0x43) {
/* DVD+RW , DVD-RAM , BD-RE, emulated drive on stdio file */
if (o->start_byte >= 0 && (o->start_byte % 2048))
strcat(reasons,
"write start address not properly aligned to 2048, ");
......@@ -1370,8 +1371,8 @@ int burn_dvd_write_session(struct burn_write_opts *o,
ret = burn_disc_close_session_dvd_minus_r(o, s);
if (ret <= 0)
return 0;
} else if (d->current_profile == 0x12) {
/* DVD-RAM */
} else if (d->current_profile == 0x12 || d->current_profile == 0x43) {
/* DVD-RAM , BD-RE */
/* ??? any finalization needed ? */;
} else if (d->current_profile == 0x13) {
/* DVD-RW restricted overwrite */
......@@ -1522,8 +1523,9 @@ int burn_dvd_write_sync(struct burn_write_opts *o,
d->needs_close_session = 0;
if (d->current_profile == 0x1a || d->current_profile == 0x12) {
/* DVD+RW , DVD-RAM */
if (d->current_profile == 0x1a || d->current_profile == 0x12 ||
d->current_profile == 0x43) {
/* DVD+RW , DVD-RAM , BD-RE */
ret = 1;
if (d->current_profile == 0x1a)
ret = burn_disc_setup_dvd_plus_rw(o, disc);
......@@ -2191,6 +2193,8 @@ int burn_random_access_write(struct burn_drive *d, off_t byte_address,
alignment = 32 * 1024;
if (d->current_profile == 0x1a) /* DVD+RW */
alignment = 2 * 1024;
if (d->current_profile == 0x43) /* BD-RE */
alignment = 2 * 1024;
if (alignment == 0) {
sprintf(msg, "Write start address not supported");
libdax_msgs_submit(libdax_messenger, d->global_index,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment