Test macros for double START UNIT and SET CD SPEED

This commit is contained in:
Thomas Schmitt 2009-11-05 17:03:01 +00:00
parent 4384b0c006
commit d158e7f456
6 changed files with 54 additions and 3 deletions

View File

@ -1 +1 @@
#define Cdrskin_timestamP "2009.11.04.084506"
#define Cdrskin_timestamP "2009.11.05.170409"

View File

@ -2769,5 +2769,20 @@ BURN_END_DECLS
# define Libburn_pioneer_dvr_216d_with_opC 1
*/
/* Experiment for problems with Pioneer DVR-216D:
After starting unit asynchronously issue again a synchronous START UNIT.
Issue an extra START UNIT pair before reserving the track.
Move the next line outside this remark and remove all blanks up to "define".
# define Libburn_pioneer_dvr_216d_double_starT 1
*/
/* Experiment for problems with Pioneer DVR-216D:
Set speed not only via SET STREAMING but also via SET CD SPEED.
Move the next line outside this remark and remove all blanks up to "define".
# define Libburn_pioneer_dvr_216d_set_cd_speeD 1
*/
#endif /*LIBBURN_H*/

View File

@ -1766,11 +1766,16 @@ regard_as_blank:;
return 0;
}
/* ts A61217 : Note for future
/* ts A61217 :
growisofs performs OPC if (data[0]<<8)|data[1]<=32
which indicates no OPC entries are attached to the
reply from the drive.
ts A91104 :
Actually growisofs performs OPC only on DVD-R[W].
*/
d->num_opc_tables = 0;
if(((data[0] << 8) | data[1]) > 32) /* i.e. > 34 bytes are available */
d->num_opc_tables = data[33];
/* ts A61219 : mmc5r03c.pdf 6.22.3.1.13 BG Format Status
0=blank (not yet started)
@ -2274,8 +2279,15 @@ void mmc_set_speed(struct burn_drive *d, int r, int w)
/* ts A61221 : try to set DVD speed via command B6h */
if (strstr(d->current_profile_text, "DVD") == d->current_profile_text){
ret = mmc_set_streaming(d, r, w, end_lba);
#ifdef Libburn_pioneer_dvr_216d_set_cd_speeD
if (ret < 0)
return; /* fatal failure */
#else
if (ret != 0)
return; /* success or really fatal failure */
#endif /* ! Libburn_pioneer_dvr_216d_set_cd_speeD */
}
/* ts A61112 : MMC standards prescribe FFFFh as max speed.
@ -3753,6 +3765,7 @@ int mmc_compose_mode_page_5(struct burn_drive *d,
pd[4] = 8;
/* <<< did not help. A91104 */
#ifdef Libburn_pioneer_dvr_216d_lsv_onE
pd[2] |= (1 << 5); /* LS_V = 1 */
pd[5] = 16; /* Link Size = 16 */
@ -4270,6 +4283,7 @@ int mmc_setup_drive(struct burn_drive *d)
d->needs_close_session = 0;
d->needs_sync_cache = 0;
d->bg_format_status = -1;
d->num_opc_tables = -1;
d->last_lead_in = -2000000000;
d->last_lead_out = -2000000000;
d->disc_type = 0xff;

View File

@ -10,6 +10,10 @@
#include "spc.h"
#include "options.h"
#ifdef Libburn_pioneer_dvr_216d_double_starT
#include <stdio.h>
#endif
/* ts A70910
debug: for tracing calls which might use open drive fds
@ -95,6 +99,18 @@ int sbc_start_unit(struct burn_drive *d)
/* ts A70918 : now asynchronous */
d->is_stopped = 0;
ret = spc_wait_unit_attention(d, 1800, "START UNIT", 0);
#ifdef Libburn_pioneer_dvr_216d_double_starT
fprintf(stderr, "libburn_DEBUG: Libburn_pioneer_dvr_216d_double_starT\n");
scsi_init_command(&c, SBC_START_UNIT, sizeof(SBC_START_UNIT));
c.retry = 1;
c.opcode[1] = 0; /* Not Immed */
c.dir = NO_TRANSFER;
d->issue_command(d, &c);
if (c.error)
return 0;
#endif
return ret;
}

View File

@ -220,6 +220,7 @@ struct burn_drive
/* ts A61218 from 51h READ DISC INFORMATION */
int last_lead_in;
int last_lead_out;
int num_opc_tables; /* ts A91104: -1= not yet known */
int bg_format_status; /* 0=needs format start, 1=needs format restart*/
int disc_type; /* 0="CD-DA or CD-ROM", 0x10="CD-I", 0x20="CD-ROM XA" */
unsigned int disc_id; /* a "32 bit binary integer" */

View File

@ -1080,6 +1080,10 @@ int burn_disc_open_track_dvd_minus_r(struct burn_write_opts *o,
/* ts A70214 : eventually adjust already expanded size of track */
burn_track_apply_fillup(s->track[tnum], d->media_capacity_remaining,1);
#ifdef Libburn_pioneer_dvr_216d_double_starT
d->start_unit(d);
#endif
if (o->write_type == BURN_WRITE_SAO) { /* DAO */
/* Round track size up to 32 KiB and reserve track */
size = ((off_t) burn_track_get_sectors(s->track[tnum]))
@ -1098,7 +1102,8 @@ int burn_disc_open_track_dvd_minus_r(struct burn_write_opts *o,
}
#ifdef Libburn_pioneer_dvr_216d_with_opC
if (!o->simulate) {
fprintf(stderr, "libburn_DEBUG: Libburn_pioneer_dvr_216d_with_opC : num_opc_tables = %d\n", d->num_opc_tables);
if (d->num_opc_tables <= 0 && !o->simulate) {
fprintf(stderr, "libburn_DEBUG: Libburn_pioneer_dvr_216d_with_opC : performing OPC\n");
d->perform_opc(d);
fprintf(stderr, "libburn_DEBUG: Libburn_pioneer_dvr_216d_with_opC : done\n");