Documented changes and release timestamp

Makefile.am

@@ -1,4 +1,8 @@
-pkgconfigdir=$(libdir)/pkgconfig
+
+# ts A90315 : LIBBURNIA_PKGCONFDIR is defined OS specific in acinclude.m4
+# was: pkgconfigdir=$(libdir)/pkgconfig
+pkgconfigdir=$(LIBBURNIA_PKGCONFDIR)
+
 libincludedir=$(includedir)/libburn
 
 lib_LTLIBRARIES = libburn/libburn.la 
@@ -103,9 +107,9 @@ test_structest_CPPFLAGS = -Ilibburn
 test_structest_LDADD = $(libburn_libburn_la_OBJECTS) $(LIBBURN_EXTRALIBS)
 test_structest_SOURCES = test/structest.c
 
-##  cdrskin construction site - ts A60816 - A90313
+##  cdrskin construction site - ts A60816 - A90507
 cdrskin_cdrskin_CPPFLAGS = -Ilibburn
-cdrskin_cdrskin_CFLAGS = -DCdrskin_libburn_0_6_4
+cdrskin_cdrskin_CFLAGS = -DCdrskin_libburn_0_7_0
 
 # cdrskin_cdrskin_LDADD = $(libburn_libburn_la_OBJECTS) $(LIBBURN_EXTRALIBS)
 # ts A80123, change proposed by Simon Huggins to cause dynamic libburn linking

README

@@ -11,7 +11,7 @@ Still containing parts of Libburn. By Derek Foreman <derek@signalmarketing.com>
 and Ben Jansens <xor@orodu.net>
 Copyright (C) 2002-2006  Derek Foreman and Ben Jansens
 
-     http://files.libburnia-project.org/releases/libburn-0.6.4.pl00.tar.gz
+     http://files.libburnia-project.org/releases/libburn-0.7.0.pl00.tar.gz
 
 ------------------------------------------------------------------------------
 
@@ -19,10 +19,10 @@ Copyright (C) 2002-2006  Derek Foreman and Ben Jansens
 
                                 From tarball
 
-Obtain libburn-0.6.4.pl00.tar.gz, take it to a directory of your choice and do:
+Obtain libburn-0.7.0.pl00.tar.gz, take it to a directory of your choice and do:
 
-   tar xzf libburn-0.6.4.pl00.tar.gz
-   cd libburn-0.6.4
+   tar xzf libburn-0.7.0.pl00.tar.gz
+   cd libburn-0.7.0
    ./configure --prefix=/usr
    make
 
@@ -47,8 +47,8 @@ Our build system is based on autotools. For preparing the build of a SVN
 snapshot you will need autotools of at least version 1.7. 
 Do in a directory of your choice:
 
-   svn co http://svn.libburnia-project.org/libburn/trunk libburn-0.6.3
-   cd libburn-0.6.3
+   svn co http://svn.libburnia-project.org/libburn/trunk libburn-svn
+   cd libburn-svn
    ./bootstrap
    ./configure --prefix=/usr
    make
@@ -388,6 +388,43 @@ Project history as far as known to me:
   operations on "stdio:" pseudo drives. Nevertheless this allowed to lift the
   ban to build libburn on operating systems other than Linux and FreeBSD.
 
+- 16 Mar 2009 libisoburn-0.3.6: xorriso uses RRIP version 1.10 as default 
+  in order to be mountable where mkisofs images are mountable.
+
+- 17 Apr 2009 libisofs-0.6.18 introduces content filtering of data files.
+  Built-in filters allow compression to formats gzip and zisofs. External
+  filter processes allow arbitrary data conversions like encryption.
+
+- 19 Apr 2009 libisoburn-0.3.8 makes use of the new libisofs capability to
+  perform content filtering of data files.
+
+- 08 May 2009 libburn-0.6.6 fixes a bug with aborting on broken output pipe
+  and a bug with device scan on FreeBSD.
+
+- 31 May 2009 libisofs-0.6.20 can record hard link relations in ISO images
+  and offers support with restoring them to disk. Current Linux kernels will
+  mount images with such hard links but will attribute a unique inode number
+  to each file.
+
+- 28 Jun 2009 libisoburn-0.4.0: xorriso can record and restore hard link
+  relations of files. Performance of data reading has been improved. Option
+  -find now supports logical operators with its tests.
+
+- 14 Jul 2009 libburn-0.6.8 fixes bugs and shortcommings with old MMC-1 drives
+  and with large SCSI bus numbers as handed out by Linux for USB drives.
+
+- 20 Jul 2009 libisoburn-0.4.0.pl01 fixes a regression in xorriso which caused
+  data loss in older sessions if xorriso was used underneath growisofs.
+  Affected are releases since libisoburn-0.3.2 in january 2009.
+
+- 25 Aug 2009 libisofs-0.6.22 can record MD5 checksums for the whole session
+  and for each single data file. Checksum tags allow to verify superblock and
+  directory tree before importing them.
+
+- 27 Aug 2009 libburn-0.7.0 allows to calm down a drive and to inquire its
+  supported profiles. It works around some pitfalls with U3 enhanced memory
+  sticks which emulate a CD-ROM.
+
 
 ------------------------------------------------------------------------------
 

acinclude.m4

@@ -1,9 +1,11 @@
 AC_DEFUN([TARGET_SHIZZLE],
 [
   ARCH=""
+  LIBBURNIA_PKGCONFDIR="$libdir"/pkgconfig
 
   AC_MSG_CHECKING([target operating system])
 
+  
   case $target in
     *-*-linux*)
       ARCH=linux
@@ -12,6 +14,7 @@ AC_DEFUN([TARGET_SHIZZLE],
     *-*-freebsd*)
       ARCH=freebsd
       LIBBURN_ARCH_LIBS=-lcam
+      LIBBURNIA_PKGCONFDIR=$(echo "$libdir" | sed 's/\/lib$/\/libdata/')/pkgconfig
       ;;
     *)
       ARCH=
@@ -22,3 +25,55 @@ AC_DEFUN([TARGET_SHIZZLE],
 
   AC_MSG_RESULT([$ARCH])
 ])
+
+
+dnl LIBBURNIA_SET_PKGCONFIG determines the install directory for the *.pc file.
+dnl Important: Must be performed _after_ TARGET_SHIZZLE
+dnl 
+AC_DEFUN([LIBBURNIA_SET_PKGCONFIG],
+[
+### for testing --enable-libdir-pkgconfig on Linux
+### LIBBURNIA_PKGCONFDIR="$libdir"data/pkgconfig
+
+if test "x$LIBBURNIA_PKGCONFDIR" = "x$libdir"/pkgconfig
+then
+  dummy=dummy
+else
+  AC_ARG_ENABLE(libdir-pkgconfig,
+  [  --enable-libdir-pkgconfig  Install to $libdir/pkgconfig on any OS, default=no],
+   , enable_libdir_pkgconfig="no")
+  AC_MSG_CHECKING([for --enable-libdir-pkgconfig])
+  if test "x$enable_libdir_pkgconfig" = xyes
+  then
+    LIBBURNIA_PKGCONFDIR="$libdir"/pkgconfig
+  fi
+  AC_MSG_RESULT([$enable_libdir_pkgconfig])
+fi
+
+libburnia_pkgconfig_override="no"
+AC_ARG_ENABLE(pkgconfig-path,
+[  --enable-pkgconfig-path=DIR  Absolute path of directory for libisofs-*.pc],
+libburnia_pkgconfig_override="yes" , enable_pkgconfig_path="none")
+AC_MSG_CHECKING([for overridden pkgconfig directory path])
+if test "x$enable_pkgconfig_path" = xno
+then
+  libburnia_pkgconfig_override="no"
+fi
+if test "x$enable_pkgconfig_path" = x -o "x$enable_pkgconfig_path" = xyes
+then
+  libburnia_pkgconfig_override="invalid argument"
+fi
+if test "x$libburnia_pkgconfig_override" = xyes
+then
+  LIBBURNIA_PKGCONFDIR="$enable_pkgconfig_path"
+  AC_MSG_RESULT([$LIBBURNIA_PKGCONFDIR])
+else
+  AC_MSG_RESULT([$libburnia_pkgconfig_override])
+fi
+AC_SUBST(LIBBURNIA_PKGCONFDIR)
+
+dnl For debugging only
+### AC_MSG_RESULT([LIBBURNIA_PKGCONFDIR = $LIBBURNIA_PKGCONFDIR])
+
+])
+

cdrskin/README

@@ -4,7 +4,8 @@
 cdrskin. By Thomas Schmitt <scdbackup@gmx.net>
 Integrated sub project of libburnia-project.org but also published via:
 http://scdbackup.sourceforge.net/cdrskin_eng.html
-http://scdbackup.sourceforge.net/cdrskin-0.6.4.pl00.tar.gz
+http://scdbackup.sourceforge.net/cdrskin-0.7.0.pl00.tar.gz
+
 Copyright (C) 2006-2009 Thomas Schmitt, provided under GPL version 2.
 ------------------------------------------------------------------------------
 
@@ -14,7 +15,7 @@ most of the libburn features from the command line.
 
 Currently it is supported on Linux with kernels >= 2.4 and on FreeBSD versions 
 with ATAPI/CAM support enabled in the kernel, see atapicam(4).
-On other X/Open compliant systems there will only be pseudo drives, but no
+On other X/Open compliant systems there will only be emulated drives, but no
 direct MMC operation on real CD/DVD/BD drives.
 
 By using this software you agree to the disclaimer at the end of this text
@@ -23,10 +24,10 @@ By using this software you agree to the disclaimer at the end of this text
 
                    Compilation, First Glimpse, Installation
 
-Obtain cdrskin-0.6.4.pl00.tar.gz, take it to a directory of your choice and do:
+Obtain cdrskin-0.7.0.pl00.tar.gz, take it to a directory of your choice and do:
 
-    tar xzf cdrskin-0.6.4.pl00.tar.gz
-    cd cdrskin-0.6.4
+    tar xzf cdrskin-0.7.0.pl00.tar.gz
+    cd cdrskin-0.7.0
 
 Within that directory execute:
 

cdrskin/add_ts_changes_to_libburn_0_7_0

@@ -38,7 +38,7 @@ original="./libburn_svn_release.tgz"
 # My changes are in $changes , mainly in $changes/cdrskin
 changes="./libburn-release"
 
-skin_release="0.6.4"
+skin_release="0.7.0"
 patch_level=".pl00"
 skin_rev="$skin_release""$patch_level"
 

cdrskin/add_ts_changes_to_libburn_0_7_1

@@ -38,7 +38,7 @@ original="./libburn_svn.tgz"
 # My changes are in $changes , mainly in $changes/cdrskin
 changes="./libburn-develop"
 
-skin_release="0.6.5"
+skin_release="0.7.1"
 patch_level=""
 skin_rev="$skin_release""$patch_level"
 

cdrskin/cdrskin.1

@@ -2,7 +2,7 @@
 .\" First parameter, NAME, should be all caps
 .\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
 .\" other parameters are allowed: see man(7), man(1)
-.TH CDRSKIN 1 "Jan 07, 2009"
+.TH CDRSKIN 1 "May 07, 2009"
 .\" Please adjust this date whenever revising the manpage.
 .\"
 .\" Some roff macros, for reference:
@@ -67,7 +67,7 @@ Write mode selection
 .br
 Recordable CD Media
 .br
-Sequentially Recordable DVD Media
+Sequentially Recordable DVD or BD Media
 .br
 Overwriteable DVD or BD Media
 .br
@@ -254,7 +254,7 @@ that it has to be formatted again. If in doubt, just give it a try.
 .SS
 .B Drive preparation and addressing:
 .br
-The drives, either CD burners or DVD burners, are accessed via addresses which
+The drives, CD, DVD, or BD burners, are accessed via addresses which
 are specific to libburn and the operating system. Those addresses get listed
 by a run of \fBcdrskin --devices\fP.
 .br
@@ -638,8 +638,8 @@ To have a chance for working on overwriteable media, this option has to be
 accompanied by option --grow_overwriteable_iso.
 .TP
 .BI \-multi
-This option keeps the CD or unformatted DVD-R[W] appendable after the current
-session has been written.
+This option keeps CD, unformatted DVD-R[W], DVD+R, or BD-R appendable
+after the current session has been written.
 Without it the disc gets closed and may not be written any more  - unless it
 is a -RW and gets blanked which causes loss of its content.
 .br
@@ -687,8 +687,8 @@ then behave strange or even go bad for the next few attempts to burn a CD.
 One should use it only if inavoidable.
 .TP
 .BI \-sao
-Write CD in Session At Once mode, a sequential DVD-R[W] in Disc-at-once
-(DAO) mode, or a DVD+R[/DL].
+Write CD in Session At Once mode or sequential DVD-R[W] in Disc-at-once
+(DAO) mode.
 .br
 With CD this mode is able to put several audio tracks on media without
 producing audible gaps between them.
@@ -696,7 +696,7 @@ producing audible gaps between them.
 With DVD-R[W] this mode can only write a single track.
 No -multi is allowed with DVD-R[W] -sao.
 .br
--sao is permissible with overwriteable DVD, BD or DVD+R[/DL] but actually
+-sao is permissible with overwriteable DVD, or DVD+R[/DL], or BD but actually
 only imposes restrictions without providing known advantages. 
 .br
 -sao can only be used for tracks of fixely predicted size. This implies that
@@ -1239,15 +1239,15 @@ cdrskin -v dev=0,1,0 fs=32m speed=8 \\
 .br
 blank=as_needed padsize=300k -
 .SS
-.B Write multi-session to the same CD, DVD-R[W] or DVD+R[/DL]:
+.B Write multi-session to the same CD, DVD-R[W], DVD+R[/DL], or BD-R:
 .br
-cdrskin dev=/dev/hdc -v padsize=300k -multi 1.iso
+cdrskin dev=/dev/sr0 -v padsize=300k -multi 1.iso
 .br
-cdrskin dev=/dev/hdc -v padsize=300k -multi 2.iso
+cdrskin dev=/dev/sr0 -v padsize=300k -multi 2.iso
 .br
-cdrskin dev=/dev/hdc -v padsize=300k -multi 3.iso
+cdrskin dev=/dev/sr0 -v padsize=300k -multi 3.iso
 .br
-cdrskin dev=/dev/hdc -v padsize=300k 4.iso
+cdrskin dev=/dev/sr0 -v padsize=300k 4.iso
 .SS
 .B Get multi-session info for option -C of program mkisofs:
 .br

cdrskin/cdrskin.c

@@ -88,7 +88,7 @@ or
 
 /** The official program version */
 #ifndef Cdrskin_prog_versioN
-#define Cdrskin_prog_versioN "0.6.4"
+#define Cdrskin_prog_versioN "0.7.0"
 #endif
 
 /** The official libburn interface revision to use.
@@ -98,10 +98,10 @@ or
 #define Cdrskin_libburn_majoR 0
 #endif
 #ifndef Cdrskin_libburn_minoR
-#define Cdrskin_libburn_minoR 6
+#define Cdrskin_libburn_minoR 7
 #endif
 #ifndef Cdrskin_libburn_micrO
-#define Cdrskin_libburn_micrO 4
+#define Cdrskin_libburn_micrO 0
 #endif
 
 
@@ -135,44 +135,43 @@ or
 #endif /* Cdrskin_libburn_cvs_A60220_tS */
 
 
-#ifdef Cdrskin_libburn_0_6_4
-#define Cdrskin_libburn_versioN "0.6.4"
+#ifdef Cdrskin_libburn_0_7_0
+#define Cdrskin_libburn_versioN "0.7.0"
 #define Cdrskin_libburn_from_pykix_svN 1
-#endif /* Cdrskin_libburn_0_6_4 */
+#endif /* Cdrskin_libburn_0_7_0 */
 
-#ifdef Cdrskin_libburn_0_6_5
-#define Cdrskin_libburn_versioN "0.6.5"
+#ifdef Cdrskin_libburn_0_7_1
+#define Cdrskin_libburn_versioN "0.7.1"
 #define Cdrskin_libburn_from_pykix_svN 1
 
 /* Place novelty switch macros here. 
    Move them down to Cdrskin_libburn_from_pykix_svN on version leap
 */
 
-/* there are no libburn novelties in 0.6.5 yet */
 
-#endif /* Cdrskin_libburn_0_6_5 */
+#endif /* Cdrskin_libburn_0_7_1 */
 
 #ifndef Cdrskin_libburn_versioN
-#define Cdrskin_libburn_0_6_4
-#define Cdrskin_libburn_versioN "0.6.4"
+#define Cdrskin_libburn_0_7_0
+#define Cdrskin_libburn_versioN "0.7.0"
 #define Cdrskin_libburn_from_pykix_svN 1
 #endif
 
-#ifdef Cdrskin_libburn_0_6_4
+#ifdef Cdrskin_libburn_0_7_0
 #undef Cdrskin_libburn_majoR
 #undef Cdrskin_libburn_minoR
 #undef Cdrskin_libburn_micrO
 #define Cdrskin_libburn_majoR 0
-#define Cdrskin_libburn_minoR 6
-#define Cdrskin_libburn_micrO 4
+#define Cdrskin_libburn_minoR 7
+#define Cdrskin_libburn_micrO 0
 #endif
-#ifdef Cdrskin_libburn_0_6_5
+#ifdef Cdrskin_libburn_0_7_1
 #undef Cdrskin_libburn_majoR
 #undef Cdrskin_libburn_minoR
 #undef Cdrskin_libburn_micrO
 #define Cdrskin_libburn_majoR 0
-#define Cdrskin_libburn_minoR 6
-#define Cdrskin_libburn_micrO 5
+#define Cdrskin_libburn_minoR 7
+#define Cdrskin_libburn_micrO 1
 #endif
 
 
@@ -4408,13 +4407,15 @@ int Cdrskin_report_disc_status(struct CdrskiN *skin, enum burn_disc_status s,
 int Cdrskin_scanbus(struct CdrskiN *skin, int flag)
 {
  int ret,i,busno,first_on_bus,pseudo_transport_group= 0,skipped_devices= 0;
- int busmax= 16;
+ int busmax= 16, busidx;
  char shellsafe[5*Cdrskin_strleN+2],perms[40],btldev[Cdrskin_adrleN];
  char adr[Cdrskin_adrleN],*raw_dev,*drives_shown= NULL;
+ int *drives_busses= NULL;
  struct stat stbuf;
 
  drives_shown= malloc(skin->n_drives+1);
- if(drives_shown==NULL)
+ drives_busses= malloc((skin->n_drives+1) * sizeof(int));
+ if(drives_shown == NULL || drives_busses == NULL)
    {ret= -1; goto ex;}
  for(i=0;i<skin->n_drives;i++)
    drives_shown[i]= 0;
@@ -4472,7 +4473,28 @@ int Cdrskin_scanbus(struct CdrskiN *skin, int flag)
    if(skin->preskin->old_pseudo_scsi_adr)
      printf("cdrskin: NOTE : The printed addresses are not cdrecord compatible !\n");
 
-   for(busno= 0;busno<=busmax;busno++) {
+   for(i=0;i<skin->n_drives;i++) {
+     drives_busses[i]= -1;
+     ret= Cdrskin_driveno_to_btldev(skin,i,btldev,1);
+     if(ret >= pseudo_transport_group &&
+        ret < pseudo_transport_group + 1000000) {
+       drives_busses[i]= ret - pseudo_transport_group;
+       if(ret > pseudo_transport_group + busmax)
+         busmax= 1 + ret - pseudo_transport_group;
+     }
+   }
+   for(busidx= 0; busidx < skin->n_drives + 1; busidx++) {
+     if(busidx < skin->n_drives)
+       busno= drives_busses[busidx];
+     else
+       busno= busmax;
+     if(busno < 0)
+   continue;
+     for(i= 0; i < busidx; i++)
+       if(drives_busses[i] == busno)
+     break;
+     if(i < busidx)
+   continue;
      first_on_bus= 1;
      for(i=0;i<skin->n_drives;i++) {
        ret= Cdrskin_driveno_to_btldev(skin,i,btldev,1);
@@ -4510,6 +4532,8 @@ int Cdrskin_scanbus(struct CdrskiN *skin, int flag)
 ex:;
  if(drives_shown!=NULL)
    free((char *) drives_shown);
+ if(drives_busses!=NULL)
+   free((char *) drives_busses);
  return(ret);
 }
 
@@ -4736,6 +4760,23 @@ cannot_read:;
  return(0);
 }
 
+int Cdrskin_print_all_profiles(struct CdrskiN *skin, struct burn_drive *drive,
+                               int flag)
+{
+ int num_profiles, profiles[64], i, ret;
+ char is_current[64], profile_name[80];
+
+ burn_drive_get_all_profiles(drive, &num_profiles, profiles, is_current);
+ for(i= 0; i < num_profiles; i++) {
+   ret= burn_obtain_profile_name(profiles[i], profile_name); 
+   if(ret <= 0)
+     strcpy(profile_name, "unknown");
+   printf("Profile: 0x%4.4X (%s)%s\n", (unsigned int) profiles[i],
+          profile_name, is_current[i] ? " (current)" : "");
+ }
+ return(1);
+}
+
 
 /** Perform -atip .
     @param flag Bitfield for control purposes:
@@ -4761,8 +4802,10 @@ int Cdrskin_atip(struct CdrskiN *skin, int flag)
  if(s==BURN_DISC_APPENDABLE && skin->no_blank_appendable) {
    is_not_really_erasable= 1;
  } else if(s==BURN_DISC_EMPTY) {
-   if(skin->verbosity>=Cdrskin_verbose_progresS)
+   if(skin->verbosity>=Cdrskin_verbose_progresS) {
      printf("Current: none\n");
+     Cdrskin_print_all_profiles(skin, drive, 0);
+   }
    ret= 0; goto ex;
  }
 
@@ -4872,7 +4915,9 @@ int Cdrskin_atip(struct CdrskiN *skin, int flag)
      printf("Current: CD-RW\n");
    else
      printf("Current: CD-R\n");
+   Cdrskin_print_all_profiles(skin, drive, 0);
  }
+
  if(strstr(profile_name,"DVD")==profile_name) {
    /* These are dummy messages for project scdbackup, so its media recognition
       gets a hint that the media is suitable and not in need of blanking.

cdrskin/cdrskin_eng.html

@@ -34,10 +34,12 @@ CD-R, DVD-R, DVD+R, DVD+R/DL, BD-R, CD-RW, DVD-RW, DVD-RAM, DVD+RW, BD-RE
 
 <P>
 <H2>Hardware requirements:</H2>
-A CD/DVD/BD recorder suitable for 
-<A HREF="http://libburnia-project.org">http://libburnia-project.org</A> <BR>
-(SCSI , ATA , USB , or SATA writers compliant to standard MMC-3 for CD
-and to MMC-5 for DVD or BD).
+About any CD, DVD, or BD recorder produced in the recent ten years.
+<BR>
+<A HREF="http://libburnia-project.org">libburn</A>
+supports recorders which are compliant to standards MMC-1 for CD and
+MMC-5 for DVD or BD. Linux and FreeBSD allow to access drives connected
+via SCSI, PATA (aka IDE, ATA), USB, or SATA.
 <BR>
 </P>
 
@@ -59,7 +61,7 @@ and to MMC-5 for DVD or BD).
 GPL software included:<BR>
 </H2>
 <DL>
-<DT>libburn-0.6.4</DT>
+<DT>libburn-0.7.0</DT>
 <DD>(founded by Derek Foreman and Ben Jansens,
 developed and maintained since August 2006 by
 Thomas Schmitt from team of libburnia-project.org)
@@ -177,14 +179,11 @@ man cdrecord</A></KBD></DD>
 <DL>
 <DT>Learn to know a more versatile way to burn ISO 9660 formatted data</DT>
 <DD>
-Standalone ISO 9660 multi-session CD/DVD tool
+Standalone ISO 9660 multi-session CD/DVD/BD tool
 <A HREF="http://scdbackup.sourceforge.net/xorriso_eng.html">xorriso</A>.
 </DD>
 </DL>
 
-Testers wanted who are willing to risk some DVD-R DL media
-or to do experiments on BD-R media.
-
 </P>
 
 <HR>
@@ -194,8 +193,8 @@ or to do experiments on BD-R media.
 <P>
 <DL>
 <DT>Download as source code (see README):</DT>
-<DD><A HREF="cdrskin-0.6.4.pl00.tar.gz">cdrskin-0.6.4.pl00.tar.gz</A>
-(750 KB).
+<DD><A HREF="cdrskin-0.7.0.pl00.tar.gz">cdrskin-0.7.0.pl00.tar.gz</A>
+(820 KB).
 </DD>
 <DD>
 The cdrskin tarballs are source code identical with libburn releases
@@ -244,22 +243,19 @@ cdrskin_0.4.2.pl00-x86-suse9_0-static.tar.gz</A>, (310 KB), -static compiled,
 <HR>
 
 <P>
-Enhancements towards previous stable version cdrskin-0.6.2.pl00:
+Enhancements towards previous stable version cdrskin-0.6.8.pl00:
 <UL>
-<LI>New operating system adapter "dummy" for stdio on general X/Open systems
-</LI>
-<LI>New stream recording mode with start address</LI>
-<LI></LI>
+<LI>Adapted to pitfalls of U3 memory sticks which appear as CD-ROM drives</LI>
+<LI>Listing all supported profiles with option -atip -v</LI>
 <!--
 <LI>none</LI>
 -->
 </UL>
 
-Bug fixes towards cdrskin-0.6.2.pl00:
+Bug fixes towards cdrskin-0.6.8.pl00:
 <UL>
 <LI>none</LI>
 <!--
-<LI>none</LI>
 -->
 </UL>
 
@@ -267,8 +263,8 @@ Bug fixes towards cdrskin-0.6.2.pl00:
 
 <P>
 <DL>
-<DT><H3>Development snapshot, version 0.6.5 :</H3></DT>
-<DD>Enhancements towards current stable version 0.6.4.pl00:
+<DT><H3>Development snapshot, version 0.7.1 :</H3></DT>
+<DD>Enhancements towards current stable version 0.7.0.pl00:
 <UL>
 <LI>none yet</LI>
 <!--
@@ -276,11 +272,20 @@ Bug fixes towards cdrskin-0.6.2.pl00:
 
 </UL>
 </DD>
+
+<DD>Bug fixes towards cdrskin-0.7.0.pl00:
+<UL>
+<LI>none yet</LI>
+<!--
+-->
+</UL>
+</DD>
+
 <DD>&nbsp;</DD>
-<DD><A HREF="README_cdrskin_devel">README 0.6.5</A>
-<DD><A HREF="cdrskin__help_devel">cdrskin_0.6.5 --help</A></DD>
-<DD><A HREF="cdrskin_help_devel">cdrskin_0.6.5 -help</A></DD>
-<DD><A HREF="man_1_cdrskin_devel.html">man cdrskin (as of 0.6.5)</A></DD>
+<DD><A HREF="README_cdrskin_devel">README 0.7.1</A>
+<DD><A HREF="cdrskin__help_devel">cdrskin_0.7.1 --help</A></DD>
+<DD><A HREF="cdrskin_help_devel">cdrskin_0.7.1 -help</A></DD>
+<DD><A HREF="man_1_cdrskin_devel.html">man cdrskin (as of 0.7.1)</A></DD>
 <DD>&nbsp;</DD>
 <DT>Maintainers of cdrskin unstable packages please use SVN of
 <A HREF="http://libburnia-project.org"> libburnia-project.org</A></DT>
@@ -300,8 +305,8 @@ admins with full system souvereignty.</DT>
 <A HREF="README_cdrskin_devel">upcoming README</A> ):
 </DD>
 <DD>
-<A HREF="cdrskin-0.6.5.tar.gz">cdrskin-0.6.5.tar.gz</A>
-(750 KB).
+<A HREF="cdrskin-0.7.1.tar.gz">cdrskin-0.7.1.tar.gz</A>
+(820 KB).
 </DD>
 
 <!-- This is not offered any more since spring 2008
@@ -334,7 +339,7 @@ Historic versions based on Derek's and Ben's
 <BR>
 Very special thanks to Andy Polyakov whose 
 <A HREF="http://fy.chalmers.se/~appro/linux/DVD+RW/tools">dvd+rw-tools</A>
-provide libburn with invaluable examples on how to deal with DVD media.
+provide libburn with invaluable examples on how to deal with DVD and BD media.
 </P>
 
 <HR>
@@ -496,12 +501,17 @@ and by <A HREF="http://sourceforge.net">sourceforge.net</A><BR>
 <A href="http://sourceforge.net">
 <IMG src="sflogo-88-1.png" BORDER="0" ALT="SourceForge Logo"></A>
 <!-- on sourceforge use : <IMG src="http://sourceforge.net/sflogo.php?group_id=16010" width="88" height="31" border="0" alt="SourceForge Logo"></A> -->
+<P>
+Enjoying a FreeBSD shell account with the opportunity to
+build and install cdrskin at<BR>
+<A HREF="http://www.en.free-shells.com.ar">free-shells.com.ar</A>
+</P>
 </FONT></CENTER>
 <HR>
 <DL>
 <DT>Links to my other published software projects :
 <DD><A HREF="http://scdbackup.webframe.org/xorriso_eng.html">
-xorriso, a standalone ISO 9660 multi-session CD/DVD burn tool.
+xorriso, a standalone ISO 9660 multi-session CD/DVD/BD burn tool.
 No mkisofs needed.
 <DL>
 <DD>

cdrskin/cdrskin_timestamp.h

@@ -1 +1 @@
-#define Cdrskin_timestamP "2009.03.13.080001"
+#define Cdrskin_timestamP "2009.08.27.123001"

cdrskin/changelog.txt

@@ -1761,6 +1761,17 @@ Version leap to 0.2.6
 Published cdrskin-0.2.6.pl01 on cdrskin home pages
 
 ------------------------------- cycle  - cdrskin-0.2.6.pl01 - 2006.11.23.114611
+* Enabled TAO
+* Bug fixed: Trailing trash appended to .wav files caused error message
+  and, if exceeding fifo size, could even stall a burn.
+* Multi-session CDs (for now restricted to write mode TAO), -multi, -msinfo
+* Bug fixed: False speed with first pacifier cycle. Potential SIGFPE by NaN.
+* Enabled named pipes and other non-plain file types as track sources
+  (actually already in previous cycle)
+* Bug fixed: Default speed was not highest possible but announced as "MAX"
+* SAO is preferred default write mode, TAO is default when needed
+* libisofs unbundled from libburn+cdrskin
+* Hints for porting to other operating systems are now in sg-*.c
 
 
 2006.11.24.121745  [437]
@@ -6506,7 +6517,7 @@ Made libburn number transition to 0.6.4
 + cdrskin/add_ts_changes_to_libburn_0_6_5
 Updated cdrskin tarball generator
 
-13 Mar 2009  []
+13 Mar 2009  [2534]
 cdrskin/changelog.txt
 Documented changes and release timestamp
 
@@ -6535,8 +6546,333 @@ Made libburn number transition to 0.6.5
 + cdrskin/add_ts_changes_to_libburn_0_6_5
 Updated cdrskin tarball generator
 
------------------------------------- cycle  - cdrskin-0.6.5 - 
------------------------------------- cycle  - cdrskin-0.6.5 - 
+13 Mar 2009  [2535]
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+------------------------------------ cycle  - cdrskin-0.6.5 - 2009.03.13.162355
+
+13 Mar 2009  [2538]
+svn move -m "libburn release 0.6.4 is ready" \
+    http://svn.libburnia-project.org/libburn/branches/ZeroSixFour \
+    http://svn.libburnia-project.org/libburn/tags/ZeroSixFour
+
+2009.03.16.190745  [2547]
+configure.ac
+acinclude.m4
+Makefile.am
+Get on FreeBSD pkgconfigdir=.../libdata , on Linux and others: .../lib
+
+2009.03.18.124558  [2553]
+libburn/spc.c
+Human readable error messages for asc=08 "Logical unit communication failure"
+
+2009.03.18.172512  [2554]
+libburn/drive.c
+Bug fix: burn_abort() did not work with broken output pipe (since rev 2514)
+
+2009.04.30.065653  [2623]
+libburn/write.c
+Marked alleged use of uninitialized memory reported by valgrind
+
+2009.04.30.065918  [2624]
+libburn/write.c
+Replaced 8 blanks by a tab
+
+2009.04.30.070813 [2625]
+libburn/sg-freebsd.c
+Bug fix: Device scan stalled on FreeBSD. Ticket 148 jwehle
+
+------------------------------------ cycle  - cdrskin-0.6.5 - 2009.04.30.070813
+Bug fix: burn_abort() did not work with broken output pipe (since rev 2514)
+Bug fix: Device scan stalled on FreeBSD. Ticket 148 jwehle
+
+7 May 2009 [2628]
+svn copy -m "Branching for libburn release 0.6.6"
+      http://svn.libburnia-project.org/libburn/trunk
+      http://svn.libburnia-project.org/libburn/branches/ZeroSixSix
+
+7 May 2009  [2629]
+cdrskin/cdrskin.1
+Mentioned BD were it was missing
+
+2009.05.07.100001  [2630]
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+Made number transition and activated development documentation
+
+7 May 2009  [2631]
+- cdrskin/add_ts_changes_to_libburn_0_6_4
+- cdrskin/add_ts_changes_to_libburn_0_6_5
++ cdrskin/add_ts_changes_to_libburn_0_6_6
++ cdrskin/add_ts_changes_to_libburn_0_6_7
+Updated cdrskin tarball generator
+
+7 May 2009  [2632]
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+------------------------------ release - cdrskin-0.6.6.pl00 - 2009.05.07.100001
+Bug fix: burn_abort() did not work with broken output pipe (since rev 2514)
+Bug fix: Device scan stalled on FreeBSD. Ticket 148 jwehle
+
+
+7 May 2009  [2633]
+cdrskin/cdrskin.1
+Mentioned BD were it was missing
+
+2009.05.07.181034  [2634]
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+Made number transition and activated development documentation
+
+7 May 2009  [2635]
+- cdrskin/add_ts_changes_to_libburn_0_6_4
+- cdrskin/add_ts_changes_to_libburn_0_6_5
++ cdrskin/add_ts_changes_to_libburn_0_6_6
++ cdrskin/add_ts_changes_to_libburn_0_6_7
+Updated cdrskin tarball generator
+
+7 May 2009  [2636]
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+------------------------------------ cycle  - cdrskin-0.6.7 - 2009.05.07.181034
+
+8 May 2009  [2637]
+svn move -m libburn release 0.6.6 is ready
+http://svn.libburnia-project.org/libburn/branches/ZeroSixSix
+http://svn.libburnia-project.org/libburn/tags/ZeroSixSix
+
+2009.05.17.144304  [2645]
+cdrskin/cdrskin.c
+Made -scanbus work with SCSI bus numbers like 85 (USB, kernel 2.6.18.2)
+
+2009.06.02.162841  [2655]
+libburn/drive.c
+libburn/async.c
+libburn/options.c
+libburn/spc.c
+libburn/libdax_msgs.h
+Rectified use of burn_drive.mdata->valid
+
+2 Jun 2009  [2656]
+test/libburner.c
+Avoided SIGSEGV if no drives were found by scan
+
+2009.06.02.172201  [2657]
+libburn/drive.c
+Avoided to enumerate faulty drive objects
+
+2009.06.03.085637 [2658]
+libburn/spc.c
+Bug fix: Old MMC-1 drives were rejected because of mode page 2Ah length
+
+2009.06.03.185118  [2659]
+libburn/transport.h
+libburn/drive.c
+libburn/spc.c
+libburn/mmc.c
+Bug fix: No usable media was detected with old MMC-1 drives
+
+2009.06.14.095004  [2669]
+libburn/sg-linux.c
+Retrying 3 times on EBUSY drives with generous usleep intervals
+
+------------------------------------ cycle  - cdrskin-0.6.7 - 2009.06.14.095833
+Made -scanbus work with high SCSI bus numbers
+Bug fix: Old MMC-1 drives were rejected because of mode page 2Ah length
+Bug fix: No usable media was detected with old MMC-1 drives
+
+
+7 Jul 2009  [2691]
+acinclude.m4
+configure.ac
+configure options --enable-libdir-pkgconfig and --enable-pkgconfig-path=DIR
+
+2009.07.07.191134  [2692]
+Timestamp for revision 2691
+
+14 Jul 2009 [2894]
+svn copy -m "Branching for libburn release 0.6.8"
+      http://svn.libburnia-project.org/libburn/trunk
+      http://svn.libburnia-project.org/libburn/branches/ZeroSixEight
+
+2009.07.14.100001  [2695]
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+Made number transition and activated development documentation
+
+14 Jul 2009  [2696]
+- cdrskin/add_ts_changes_to_libburn_0_6_6
+- cdrskin/add_ts_changes_to_libburn_0_6_7
++ cdrskin/add_ts_changes_to_libburn_0_6_8
++ cdrskin/add_ts_changes_to_libburn_0_6_9
+Updated cdrskin tarball generator
+
+14 Jul 2009  [2697]
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+------------------------------ release - cdrskin-0.6.8.pl00 - 2009.07.14.100001
+Made -scanbus work with high SCSI bus numbers
+Bug fix: Old MMC-1 drives were rejected because of mode page 2Ah length
+Bug fix: No usable media was detected with old MMC-1 drives
+
+
+2009.07.14.133159  [2698]
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+Made number transition and activated development documentation
+
+14 Jul 2009  [2699]
+- cdrskin/add_ts_changes_to_libburn_0_6_6
+- cdrskin/add_ts_changes_to_libburn_0_6_7
++ cdrskin/add_ts_changes_to_libburn_0_6_8
++ cdrskin/add_ts_changes_to_libburn_0_6_9
+Updated cdrskin tarball generator
+
+14 Jul 2009  [2700]
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+------------------------------------ cycle  - cdrskin-0.6.9 - 2009.07.14.133159
+
+14 Jul 2009  [2702]
+svn move -m libburn release 0.6.8 is ready
+http://svn.libburnia-project.org/libburn/branches/ZeroSixEight
+http://svn.libburnia-project.org/libburn/tags/ZeroSixEight
+
+
+2009.08.15.133055  [2721]
+libburn/write.c
+Added test code about output blocks size as comment.
+
+2009.08.15.133332  [2722]
+libburn/libburn.h
+libburn/transport.h
+libburn/drive.c
+libburn/mmc.h
+libburn/mmc.c
+New API calls burn_drive_get_all_profiles(), burn_obtain_profile_name()
+
+2009.08.15.133744  [2723]
+cdrskin/cdrskin.c
+Listing all profiles with cdrskin -v -atip
+
+2009.08.23.130326  [2735]
+libburn/drive.c
+libburn/spc.c
+libburn/mmc.c
+Adapted to pitfalls of U3 memory sticks which appear as CD-ROM drives
+
+------------------------------------ cycle  - cdrskin-0.6.9 - 2009.08.23.132942
+New API calls burn_drive_get_all_profiles(), burn_obtain_profile_name()
+Adapted to pitfalls of U3 memory sticks which appear as CD-ROM drives
+
+
+2009.08.24.131146  [2736]
+libburn/libburn.h
+libburn/transport.h
+libburn/drive.c
+libburn/sbc.c
+New API call burn_drive_snooze()
+
+2009.08.24.161646  [2737]
+libburn/libburn.h
+libburn/drive.c
+Made burn_drive_snooze() safe for emulated drives
+
+2009.08.24.202517  [2740]
+libburn/transport.h
+libburn/sbc.c
+libburn/mmc.c
+Implemented automatic START UNIT after STOP UNIT before any other SCSI command
+
+2009.08.27.123001  [2746]
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+Made number transition and activated development documentation
+
+27 Aug 2009  [2747]
+- cdrskin/add_ts_changes_to_libburn_0_6_8
+- cdrskin/add_ts_changes_to_libburn_0_6_9
++ cdrskin/add_ts_changes_to_libburn_0_7_0
++ cdrskin/add_ts_changes_to_libburn_0_7_1
+Updated cdrskin tarball generator
+
+27 Aug 2009  []
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+------------------------------ release - cdrskin-0.7.0.pl00 - 2009.08.27.123001
+New API calls burn_drive_get_all_profiles(), burn_obtain_profile_name()
+New API call burn_drive_snooze()
+Adapted to pitfalls of U3 memory sticks which appear as CD-ROM drives
+Listing all supported profiles with option -atip
+
+
+  []
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+Made number transition and activated development documentation
+
+27 Aug 2009  []
+- cdrskin/add_ts_changes_to_libburn_0_6_8
+- cdrskin/add_ts_changes_to_libburn_0_6_9
++ cdrskin/add_ts_changes_to_libburn_0_7_0
++ cdrskin/add_ts_changes_to_libburn_0_7_1
+Updated cdrskin tarball generator
+
+  []
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+
+------------------------------------ cycle  - cdrskin-0.7.1 - 
+------------------------------------ cycle  - cdrskin-0.7.1 - 
 
 ===============================================================================
                                     TODO

cdrskin/compile_cdrskin.sh

@@ -1,13 +1,13 @@
 #!/bin/sh
 
 # compile_cdrskin.sh  
-# Copyright 2005 - 2008 Thomas Schmitt, scdbackup@gmx.net, GPL version 2
+# Copyright 2005 - 2009 Thomas Schmitt, scdbackup@gmx.net, GPL version 2
 # to be executed within  ./libburn-*  resp ./cdrskin-*
 
 debug_opts="-O2"
 def_opts=
 largefile_opts="-D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE=1"
-libvers="-DCdrskin_libburn_0_6_4"
+libvers="-DCdrskin_libburn_0_7_0"
 cleanup_src_or_obj="libburn/cleanup.o"
 libdax_msgs_o="libburn/libdax_msgs.o"
 libdax_audioxtr_o="libburn/libdax_audioxtr.o"
@@ -33,15 +33,15 @@ do
     libdax_audioxtr_o=
     libdax_msgs_o="libburn/message.o"
     cleanup_src_or_obj="-DCleanup_has_no_libburn_os_H cdrskin/cleanup.c"
-  elif test "$i" = "-libburn_0_6_4"
+  elif test "$i" = "-libburn_0_7_0"
   then
-    libvers="-DCdrskin_libburn_0_6_4"
+    libvers="-DCdrskin_libburn_0_7_0"
     libdax_audioxtr_o="libburn/libdax_audioxtr.o"
     libdax_msgs_o="libburn/libdax_msgs.o"
     cleanup_src_or_obj="libburn/cleanup.o"
   elif test "$i" = "-libburn_svn"
   then
-    libvers="-DCdrskin_libburn_0_6_5"
+    libvers="-DCdrskin_libburn_0_7_1"
     libdax_audioxtr_o="libburn/libdax_audioxtr.o"
     libdax_msgs_o="libburn/libdax_msgs.o"
     cleanup_src_or_obj="libburn/cleanup.o"
@@ -75,7 +75,7 @@ do
     echo "Options:"
     echo "  -compile_cdrfifo  compile program cdrskin/cdrfifo."
     echo "  -compile_dewav    compile program test/dewav without libburn."
-    echo "  -libburn_0_6_4    set macro to match libburn-0.6.4"
+    echo "  -libburn_0_7_0    set macro to match libburn-0.7.0"
     echo "  -libburn_svn      set macro to match current libburn-SVN."
     echo "  -do_not_compile_cdrskin  omit compilation of cdrskin/cdrskin."
     echo "  -experimental     use newly introduced libburn features."

configure.ac

@@ -1,4 +1,4 @@
-AC_INIT([libburn], [0.6.4], [http://libburnia-project.org])
+AC_INIT([libburn], [0.7.0], [http://libburnia-project.org])
 AC_PREREQ([2.50])
 dnl AC_CONFIG_HEADER([config.h])	
 
@@ -7,7 +7,7 @@ AC_CANONICAL_TARGET
 
 AM_INIT_AUTOMAKE([subdir-objects])
 
-dnl Notes by ts A71207 - A81111 :
+dnl Notes by ts A71207 - A90827 :
 dnl
 dnl Regrettably the meaning of the various version types was misunderstood
 dnl before version 0.4.1.
@@ -71,6 +71,9 @@ dnl    0.5.8 = libburn.so.4.23.0
 dnl    0.6.0 = libburn.so.4.25.0
 dnl    0.6.2 = libburn.so.4.27.0
 dnl    0.6.4 = libburn.so.4.29.0
+dnl    0.6.6 = libburn.so.4.31.0
+dnl    0.6.8 = libburn.so.4.33.0
+dnl    0.7.0 = libburn.so.4.35.0
 dnl
 dnl So LT_CURRENT, LT_REVISION and LT_AGE get set directly here.
 dnl SONAME of the emerging library is  LT_CURRENT - LT_AGE.
@@ -95,8 +98,8 @@ dnl If BURN_*_VERSION changes, be sure to change AC_INIT above to match.
 dnl
 dnl As said: Only copies. Original in libburn/libburn.h : burn_header_version_*
 BURN_MAJOR_VERSION=0
-BURN_MINOR_VERSION=6
-BURN_MICRO_VERSION=4
+BURN_MINOR_VERSION=7
+BURN_MICRO_VERSION=0
 BURN_VERSION=$BURN_MAJOR_VERSION.$BURN_MINOR_VERSION.$BURN_MICRO_VERSION
 
 AC_SUBST(BURN_MAJOR_VERSION)
@@ -107,15 +110,15 @@ AC_SUBST(BURN_VERSION)
 dnl Libtool versioning
 LT_RELEASE=$BURN_MAJOR_VERSION.$BURN_MINOR_VERSION.$BURN_MICRO_VERSION
 dnl
-dnl ts A90313
-dnl This is the release version libburn-0.6.4 = libburn.so.4.29.0
+dnl ts A90827
+dnl This is the release version libburn-0.7.0 = libburn.so.4.35.0
 dnl ### This is the development version after above release version
 dnl LT_CURRENT++, LT_AGE++ has not yet happened.
 dnl ### LT_CURRENT++, LT_AGE++ has happened meanwhile.
 dnl
-dnl SONAME = 33 - 29 = 4 . Linux library name = libburn.so.4.29.0
-LT_CURRENT=33
-LT_AGE=29
+dnl SONAME = 39 - 35 = 4 . Linux library name = libburn.so.4.35.0
+LT_CURRENT=39
+LT_AGE=35
 LT_REVISION=0
 LT_CURRENT_MINUS_AGE=`expr $LT_CURRENT - $LT_AGE`
 
@@ -162,6 +165,7 @@ AC_SUBST(THREAD_LIBS)
 
 TARGET_SHIZZLE
 AC_SUBST(ARCH)
+AC_SUBST(LIBBURNIA_PKGCONFDIR)
 AC_SUBST(LIBBURN_ARCH_LIBS)
 
 dnl ts A90303
@@ -193,6 +197,13 @@ else
     CFLAGS="$CFLAGS -DDEBUG"
 fi
 
+
+dnl Determine target directory for libburn-*.pc
+dnl Important: Must be performed _after_ TARGET_SHIZZLE
+dnl
+LIBBURNIA_SET_PKGCONFIG
+
+
 AC_CONFIG_FILES([
 	Makefile
 	doc/doxygen.conf

libburn/async.c

@@ -559,7 +559,7 @@ void burn_disc_write(struct burn_write_opts *opts, struct burn_disc *disc)
 	}
 
 	/* ts A61007 : obsolete Assert in spc_select_write_params() */
-	if (d->drive_role == 1 && !d->mdata->valid) {
+	if (d->drive_role == 1 && d->mdata->valid <= 0) {
 		libdax_msgs_submit(libdax_messenger,
 				d->global_index, 0x00020113,
 				LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,

libburn/drive.c

@@ -40,6 +40,9 @@
 /* A70903 : for burn_scsi_setup_drive() */
 #include "spc.h"
 
+/* A90815 : for mmc_obtain_profile_name() */
+#include "mmc.h"
+
 #include "libdax_msgs.h"
 extern struct libdax_msgs *libdax_messenger;
 
@@ -232,7 +235,7 @@ int burn_drive_inquire_media(struct burn_drive *d)
 	/* ts A61020 : d->status was set to BURN_DISC_BLANK as pure guess */
 
         /* ts A71128 : run read_disc_info() for any recognizeable profile */
-	if (d->current_profile > 0 || 
+	if (d->current_profile > 0 || d->current_is_guessed_profile ||
 	    d->mdata->cdr_write || d->mdata->cdrw_write ||
 	    d->mdata->dvdr_write || d->mdata->dvdram_write) {
 
@@ -418,6 +421,9 @@ int burn_drive_unregister(struct burn_drive *d)
 struct burn_drive *burn_drive_finish_enum(struct burn_drive *d)
 {
 	struct burn_drive *t;
+	char msg[BURN_DRIVE_ADR_LEN + 160];
+	int ret;
+
 	/* ts A60821
    	<<< debug: for tracing calls which might use open drive fds */
 	int mmc_function_spy(struct burn_drive *d, char * text);
@@ -430,13 +436,19 @@ struct burn_drive *burn_drive_finish_enum(struct burn_drive *d)
 	mmc_function_spy(NULL, "enumerate_common : -------- doing grab");
 
 	/* try to get the drive info */
-	if (t->grab(t)) {
+	ret = t->grab(t);
+	if (ret) {
 	        burn_print(2, "getting drive info\n");
 	        t->getcaps(t);
 	        t->unlock(t);
 	        t->released = 1;
 	} else {
-	        burn_print(2, "unable to grab new located drive\n");
+		/* ts A90602 */
+		d->mdata->valid = -1;
+                sprintf(msg, "Unable to grab scanned drive %s", d->devname);
+                libdax_msgs_submit(libdax_messenger, d->global_index,
+                                0x0002016f, LIBDAX_MSGS_SEV_DEBUG,
+                                LIBDAX_MSGS_PRIO_LOW, msg, 0, 0);
 	        burn_drive_unregister(t);
 		t = NULL;
 	}
@@ -521,6 +533,22 @@ int burn_drive_release_fl(struct burn_drive *d, int flag)
 }
 
 
+/* API */
+/* ts A90824
+   @param flag bit0= wake up (else start snoozing)
+*/
+int burn_drive_snooze(struct burn_drive *d, int flag)
+{
+	if (d->drive_role != 1)
+		return 0;
+	if (flag & 1)
+		d->start_unit(d);
+	else
+		d->stop_unit(d);
+	return 1;
+}
+
+
 /* API */
 void burn_drive_release(struct burn_drive *d, int le)
 {
@@ -855,7 +883,7 @@ static int drive_getcaps(struct burn_drive *d, struct burn_drive_info *out)
 	a ssert(d->mdata);
 #endif
 
-	if (!d->idata->valid || !d->mdata->valid)
+	if(d->idata->valid <= 0 || d->mdata->valid <= 0)
 		return 0;
 
 	id = (struct burn_scsi_inquiry_data *)d->idata;
@@ -921,7 +949,7 @@ int burn_drive_scan_sync(struct burn_drive_info *drives[],
 	*/
 	unsigned char scanned[32];
 	unsigned count = 0;
-	int i;
+	int i, ret;
 
 	/* ts A61007 : moved up to burn_drive_scan() */
 	/* a ssert(burn_running); */
@@ -978,13 +1006,22 @@ int burn_drive_scan_sync(struct burn_drive_info *drives[],
 		if (drive_array[i].global_index < 0)
 	continue;		/* invalid device */
 
-		while (!drive_getcaps(&drive_array[i],
-				      &(*drives)[*n_drives])) {
+		/* ts A90602 : This old loop is not plausible. See A70907.
+		  while (!drive_getcaps(&drive_array[i],
+		         &(*drives)[*n_drives])) {
 			sleep(1);
-		}
-		(*n_drives)++;
+		  }
+		*/
+		/* ts A90602 : A single call shall do (rather than a loop) */
+		ret = drive_getcaps(&drive_array[i], &(*drives)[*n_drives]);
+		if (ret > 0)
+			(*n_drives)++;
 		scanned[i / 8] |= 1 << (i % 8);
 	}
+	if (*drives != NULL && *n_drives == 0) {
+		free ((char *) *drives);
+		*drives = NULL;
+	}
 
 	return(1);
 }
@@ -1140,14 +1177,14 @@ void burn_sectors_to_msf(int sectors, int *m, int *s, int *f)
 
 int burn_drive_get_read_speed(struct burn_drive *d)
 {
-	if(!d->mdata->valid)
+	if(d->mdata->valid <= 0)
 		return 0;
 	return d->mdata->max_read_speed;
 }
 
 int burn_drive_get_write_speed(struct burn_drive *d)
 {
-	if(!d->mdata->valid)
+	if(d->mdata->valid <= 0)
 		return 0;
 	return d->mdata->max_write_speed;
 }
@@ -1155,7 +1192,7 @@ int burn_drive_get_write_speed(struct burn_drive *d)
 /* ts A61021 : New API function */
 int burn_drive_get_min_write_speed(struct burn_drive *d)
 {
-	if(!d->mdata->valid)
+	if(d->mdata->valid <= 0)
 		return 0;
 	return d->mdata->min_write_speed;
 }
@@ -1742,6 +1779,10 @@ int burn_abort(int patience,
 	unsigned long wait_grain= 100000;
 	time_t start_time, current_time, pacifier_time, end_time;
 
+#ifndef NIX
+	time_t stdio_patience = 3;
+#endif
+
 	current_time = start_time = pacifier_time = time(0);
 	end_time = start_time + patience;
 
@@ -1758,15 +1799,35 @@ int burn_abort(int patience,
 			if(occup == -2)
 		continue;
 
-#ifdef NIX
-			/* <<< this causes a race condition with drive usage
-				and drive disposal
-			*/
 			if(drive_array[i].drive_role != 1) {
+
+#ifdef NIX
+
+				/* ts A90302
+				   <<< this causes a race condition with drive
+				       usage and drive disposal.
+			  	*/
 				drive_array[i].busy = BURN_DRIVE_IDLE;
 				burn_drive_forget(&(drive_array[i]), 1);
-			} else
-#endif /* NIX */
+		continue;
+
+#else /* NIX */
+
+				/* ts A90318
+				   >>> but if a pipe breaks then the drive
+				       never gets idle.
+				   So for now with a short patience timespan
+				   and eventually a deliberate memory leak.
+			  	*/
+				if (current_time - start_time >
+				    stdio_patience) {
+					drive_array[i].global_index = -1;
+		continue;
+				}
+
+#endif /* ! NIX */
+
+			}
 
 			if(occup <= 10) {
 				burn_drive_forget(&(drive_array[i]), 1);
@@ -1847,11 +1908,16 @@ int burn_disc_read_atip(struct burn_drive *d)
 	}
 	if(d->drive_role != 1)
 		return 0;
-	if (d->current_profile == -1 || d->current_is_cd_profile) {
+	if ((d->current_profile == -1 || d->current_is_cd_profile)
+	    && (d->mdata->cdrw_write || d->current_profile != 0x08)) {
 		d->read_atip(d);
 		/* >>> some control of success would be nice :) */
 	} else {
-		/* mmc5r03c.pdf 6.26.3.6.3 : ATIP is undefined for non-CD */;
+		/* mmc5r03c.pdf 6.26.3.6.3 : ATIP is undefined for non-CD
+		   (and it seems meaningless for non-burners).
+		   ts A90823: Pseudo-CD U3 memory stick stalls with ATIP.
+		              It is !cdrw_write and profile is 0x08.
+		*/
 		return 0;
 	}
 	return 1;
@@ -1959,6 +2025,30 @@ int burn_disc_get_profile(struct burn_drive *d, int *pno, char name[80])
 }
 
 
+/* ts A90815 : New API function */
+int burn_drive_get_all_profiles(struct burn_drive *d, int *num_profiles,
+				int profiles[64], char is_current[64])
+{
+	int i;
+
+	*num_profiles = d->num_profiles;
+	for (i = 0; i < d->num_profiles; i++) {
+		profiles[i] = (d->all_profiles[i * 4] << 8) |
+				d->all_profiles[i * 4 + 1];
+		is_current[i] = d->all_profiles[i * 4 + 2] & 1;
+	}
+	return 1;
+}
+
+
+/* ts A90815 : New API function */
+int burn_obtain_profile_name(int profile_number, char name[80])
+{
+	strcpy(name, mmc_obtain_profile_name(profile_number));
+	return(name[0] != 0);
+}
+
+
 /* ts A61223 : New API function */
 int burn_drive_wrote_well(struct burn_drive *d)
 {
@@ -2058,7 +2148,7 @@ int burn_drive_get_speedlist(struct burn_drive *d,
 	struct burn_speed_descriptor *sd, *csd = NULL;
 
 	(*speed_list) = NULL;
-	if(!d->mdata->valid)
+	if(d->mdata->valid <= 0)
 		return 0;
 	for (sd = d->mdata->speed_descriptors; sd != NULL; sd = sd->next) {
 		ret = burn_speed_descriptor_new(&csd, NULL, csd, 0);
@@ -2083,7 +2173,7 @@ int burn_drive_get_best_speed(struct burn_drive *d, int speed_goal,
 	if (speed_goal < 0)
 		best_speed = 2000000000;
 	*best_descr = NULL;
-	if(!d->mdata->valid)
+	if(d->mdata->valid <= 0)
 		return 0;
 	for (sd = d->mdata->speed_descriptors; sd != NULL; sd = sd->next) {
 		if (flag & 1)

libburn/libburn.h

@@ -1029,6 +1029,23 @@ int burn_drive_obtain_scsi_adr(char *path, int *bus_no, int *host_no,
 int burn_drive_grab(struct burn_drive *drive, int load);
 
 
+/* ts A90824 */
+/** Calm down or alert a drive. Some drives stay alert after reading for
+    quite some time. This saves time with the startup for the next read
+    operation but also causes noise and consumes extra energy. It makes
+    sense to calm down the drive if no read operation is expected for the
+    next few seconds. The drive will get alert automatically if operations
+    are required.
+    @param drive  The drive to influence.
+    @param flag   Bitfield for control purposes
+                  bit0= become alert (else start snoozing)
+                        This is not mandatory to allow further drive operations
+    @return       1= success , 0= drive role not suitable for calming
+    @since 0.7.0
+*/
+int burn_drive_snooze(struct burn_drive *d, int flag);
+
+
 /** Release a drive. This should not be done until the drive is no longer
     busy (see burn_drive_get_status).
     Linux: The drive device file is not reserved afterwards. (O_EXCL, F_SETLK).
@@ -1998,6 +2015,34 @@ void burn_read_opts_transfer_damaged_blocks(struct burn_read_opts *opts,
 void burn_read_opts_set_hardware_error_retries(struct burn_read_opts *opts,
 					       unsigned char hardware_error_retries);
 
+
+/* ts A90815 */
+/** Gets the list of profile codes supported by the drive.
+    Profiles depict the feature sets which constitute media types. For
+    known profile codes and names see burn_disc_get_profile().
+    @param d            is the drive to query
+    @param num_profiles returns the number of supported profiles
+    @param profiles     returns the profile codes
+    @param is_current   returns the status of the corresponding profile code:
+                        1= current, i.e. the matching media is loaded
+                        0= not current, i.e. the matching media is not loaded
+    @return  always 1 for now
+    @since 0.7.0
+*/
+int burn_drive_get_all_profiles(struct burn_drive *d, int *num_profiles,
+                                int profiles[64], char is_current[64]);
+
+
+/* ts A90815 */
+/** Obtains the profile name associated with a profile code.
+    @param profile_code the profile code to be translated
+    @param name         returns the profile name (e.g. "DVD+RW")  
+    @return             1= known profile code , 0= unknown profile code
+    @since 0.7.0
+*/
+int burn_obtain_profile_name(int profile_code, char name[80]);
+
+
 /** Gets the maximum write speed for a drive and eventually loaded media.
     The return value might change by the media type of already loaded media,
     again by call burn_drive_grab() and again by call burn_disc_read_atip(). 
@@ -2259,8 +2304,8 @@ void burn_version(int *major, int *minor, int *micro);
 
 */
 #define burn_header_version_major  0
-#define burn_header_version_minor  6
-#define burn_header_version_micro  4
+#define burn_header_version_minor  7
+#define burn_header_version_micro  0
 /** Note:
     Above version numbers are also recorded in configure.ac because libtool
     wants them as parameters at build time.

libburn/libdax_msgs.h

@@ -545,7 +545,8 @@ Range "scdbackup"          :  0x00020000 to 0x0002ffff
  0x0002016a (FAILURE,HIGH) = No MMC transport adapter is present
  0x0002016b (WARNING,HIGH) = No MMC transport adapter is present
  0x0002016c (DEBUG,HIGH)   = No MMC transport adapter is present
-
+ 0x0002016e (DEBUG,HIGH)   = MODE SENSE page 2A too short
+ 0x0002016f (DEBUG,HIGH)   = Unable to grab scanned drive
  0x00020170 (NOTE,HIGH)    = Closing open session before writing new one
  0x00020171 (NOTE,HIGH)    = Closing BD-R with accidently open session
  

libburn/mmc.c

@@ -77,6 +77,12 @@ extern struct libdax_msgs *libdax_messenger;
  # define Libburn_do_not_format_dvd_ram_or_bd_rE 1
 */
 
+
+/* ts A90603 : Simulate the command restrictions of an old MMC-1 drive
+ # define Libisofs_simulate_old_mmc1_drivE 1
+*/
+
+
 /* DVD/BD progress report:
    ts A61219 : It seems to work with a used (i.e. thoroughly formatted) DVD+RW.
                Error messages of class DEBUG appear because of inability to
@@ -230,6 +236,11 @@ int mmc_function_spy(struct burn_drive *d, char * text)
 		d->cancel = 1;
 		return 0;
 	}
+	if (d->is_stopped && strcmp(text, "stop_unit") != 0 &&
+	    strcmp(text, "start_unit") != 0) {
+		d->start_unit(d);
+		d->is_stopped = 0;
+	}
 	return 1;
 }
 
@@ -1153,7 +1164,7 @@ static int mmc_read_toc_al(struct burn_drive *d, int *alloc_len)
 	struct buffer buf;
 	struct command c;
 	int dlen;
-	int i, bpl= 12, old_alloc_len, t_idx;
+	int i, bpl= 12, old_alloc_len, t_idx, ret;
 	unsigned char *tdata;
 	char msg[321];
 
@@ -1179,6 +1190,16 @@ static int mmc_read_toc_al(struct burn_drive *d, int *alloc_len)
 			d->status = BURN_DISC_FULL;
 		return 1;
 	}
+
+	/* ts A90823:
+	   SanDisk Cruzer U3 memory stick stalls on format 2.
+	   Format 0 seems to be more conservative with read-only drives.
+	*/
+	if (!(d->mdata->cdrw_write || d->current_profile != 0x08)) {
+		ret = mmc_read_toc_fmt0(d);
+		return ret;
+	}
+
 	scsi_init_command(&c, MMC_GET_TOC, sizeof(MMC_GET_TOC));
 /*
 	memcpy(c.opcode, MMC_GET_TOC, sizeof(MMC_GET_TOC));
@@ -1460,6 +1481,75 @@ inquire_drive:;
 }
 
 
+/* ts A61201 */
+char *mmc_obtain_profile_name(int profile_number)
+{
+	static char *texts[0x53] = {NULL};
+	int i, max_pno = 0x53;
+	
+	if (texts[0] == NULL) {
+		for (i = 0; i<max_pno; i++)
+			texts[i] = "";
+		/* mmc5r03c.pdf , Table 89, Spelling: guessed cdrecord style */
+		texts[0x01] = "Non-removable disk";
+		texts[0x02] = "Removable disk";
+		texts[0x03] = "MO erasable";
+		texts[0x04] = "Optical write once";
+		texts[0x05] = "AS-MO";
+		texts[0x08] = "CD-ROM";
+		texts[0x09] = "CD-R";
+		texts[0x0a] = "CD-RW";
+		texts[0x10] = "DVD-ROM";
+		texts[0x11] = "DVD-R sequential recording";
+		texts[0x12] = "DVD-RAM";
+		texts[0x13] = "DVD-RW restricted overwrite";
+		texts[0x14] = "DVD-RW sequential recording";
+		texts[0x15] = "DVD-R/DL sequential recording";
+		texts[0x16] = "DVD-R/DL layer jump recording";
+		texts[0x1a] = "DVD+RW";
+		texts[0x1b] = "DVD+R";
+		texts[0x2a] = "DVD+RW/DL";
+		texts[0x2b] = "DVD+R/DL";
+		texts[0x40] = "BD-ROM";
+		texts[0x41] = "BD-R sequential recording";
+		texts[0x42] = "BD-R random recording";
+		texts[0x43] = "BD-RE";
+		texts[0x50] = "HD-DVD-ROM";
+		texts[0x51] = "HD-DVD-R";
+		texts[0x52] = "HD-DVD-RAM";
+	}
+	if (profile_number<0 || profile_number>=max_pno)
+		return "";
+	return texts[profile_number];
+}
+
+
+/* ts A90603 : to be used if the drive knows no GET CONFIGURATION
+*/
+static int mmc_guess_profile(struct burn_drive *d, int flag)
+{
+	int cp;
+
+	cp = 0;
+	if (d->status == BURN_DISC_BLANK ||
+	    d->status == BURN_DISC_APPENDABLE) {
+		cp = 0x09;
+	} else if (d->status == BURN_DISC_FULL) {
+		cp = 0x08;
+	}
+	if (cp)
+		if (d->erasable)
+			cp = 0x0a;
+	d->current_profile = cp;
+	if (cp == 0)
+		return 0;
+	d->current_is_cd_profile = 1;
+	d->current_is_supported_profile = 1;
+	strcpy(d->current_profile_text, mmc_obtain_profile_name(cp));
+	return 1;
+}
+
+
 static int mmc_read_disc_info_al(struct burn_drive *d, int *alloc_len)
 {
 	struct buffer buf;
@@ -1610,6 +1700,10 @@ regard_as_blank:;
 		break;
 	}
 
+	/* ts A90603 : An MMC-1 drive might not know the media type yet */
+	if (d->current_is_guessed_profile && d->current_profile == 0)
+		mmc_guess_profile(d, 0);
+
 	if ((d->current_profile != 0 || d->status != BURN_DISC_UNREADY) 
 		&& ! d->current_is_supported_profile) {
 		if (!d->silent_on_scsi_error) {
@@ -1625,7 +1719,7 @@ regard_as_blank:;
 		return 0;
 	}
 
-	/* >>> ts A61217 : Note for future
+	/* ts A61217 : Note for future
 	   growisofs performs OPC if (data[0]<<8)|data[1]<=32
 	   which indicates no OPC entries are attached to the
 	   reply from the drive.
@@ -2165,56 +2259,13 @@ void mmc_set_speed(struct burn_drive *d, int r, int w)
 }
 
 
-/* ts A61201 */
-static char *mmc_obtain_profile_name(int profile_number)
-{
-	static char *texts[0x53] = {NULL};
-	int i, max_pno = 0x53;
-	
-	if (texts[0] == NULL) {
-		for (i = 0; i<max_pno; i++)
-			texts[i] = "";
-		/* mmc5r03c.pdf , Table 89, Spelling: guessed cdrecord style */
-		texts[0x01] = "Non-removable disk";
-		texts[0x02] = "Removable disk";
-		texts[0x03] = "MO erasable";
-		texts[0x04] = "Optical write once";
-		texts[0x05] = "AS-MO";
-		texts[0x08] = "CD-ROM";
-		texts[0x09] = "CD-R";
-		texts[0x0a] = "CD-RW";
-		texts[0x10] = "DVD-ROM";
-		texts[0x11] = "DVD-R sequential recording";
-		texts[0x12] = "DVD-RAM";
-		texts[0x13] = "DVD-RW restricted overwrite";
-		texts[0x14] = "DVD-RW sequential recording";
-		texts[0x15] = "DVD-R/DL sequential recording";
-		texts[0x16] = "DVD-R/DL layer jump recording";
-		texts[0x1a] = "DVD+RW";
-		texts[0x1b] = "DVD+R";
-		texts[0x2a] = "DVD+RW/DL";
-		texts[0x2b] = "DVD+R/DL";
-		texts[0x40] = "BD-ROM";
-		texts[0x41] = "BD-R sequential recording";
-		texts[0x42] = "BD-R random recording";
-		texts[0x43] = "BD-RE";
-		texts[0x50] = "HD-DVD-ROM";
-		texts[0x51] = "HD-DVD-R";
-		texts[0x52] = "HD-DVD-RAM";
-	}
-	if (profile_number<0 || profile_number>=max_pno)
-		return "";
-	return texts[profile_number];
-}
-
-
 /* ts A61201 : found in unfunctional state
  */
 static int mmc_get_configuration_al(struct burn_drive *d, int *alloc_len)
 {
 	struct buffer buf;
 	int len, cp, descr_len = 0, feature_code, prf_number, only_current = 1;
-	int old_alloc_len;
+	int old_alloc_len, only_current_profile = 0;
 	unsigned char *descr, *prf, *up_to, *prf_end;
 	struct command c;
 	int phys_if_std = 0;
@@ -2227,6 +2278,8 @@ static int mmc_get_configuration_al(struct burn_drive *d, int *alloc_len)
         d->current_profile_text[0] = 0;
 	d->current_is_cd_profile = 0;
 	d->current_is_supported_profile = 0;
+        d->current_is_guessed_profile = 0;
+	d->num_profiles = 0;
 	d->current_has_feat21h = 0;
 	d->current_feat21h_link_size = -1;
 	d->current_feat23h_byte4 = 0;
@@ -2235,10 +2288,6 @@ static int mmc_get_configuration_al(struct burn_drive *d, int *alloc_len)
 
 	scsi_init_command(&c, MMC_GET_CONFIGURATION,
 			 sizeof(MMC_GET_CONFIGURATION));
-/*
-	memcpy(c.opcode, MMC_GET_CONFIGURATION, sizeof(MMC_GET_CONFIGURATION));
-	c.oplen = sizeof(MMC_GET_CONFIGURATION);
-*/
 	c.dxfer_len= *alloc_len;
 	c.retry = 1;
 	c.opcode[7] = (c.dxfer_len >> 8) & 0xff;
@@ -2249,8 +2298,24 @@ static int mmc_get_configuration_al(struct burn_drive *d, int *alloc_len)
 	c.dir = FROM_DRIVE;
 	d->issue_command(d, &c);
 
-	if (c.error)
+#ifdef Libisofs_simulate_old_mmc1_drivE
+	c.error = 1;
+	c.sense[2] = 0x5;
+	c.sense[12] = 0x20;
+	c.sense[13] = 0x0;
+#endif /* Libisofs_simulate_old_mmc1_drivE */
+
+	if (c.error) {
+		/* ts A90603 : MMC-1 drive do not know 46h GET CONFIGURATION */
+		if (c.sense[2] == 0x5 && c.sense[12] == 0x20 &&
+		    c.sense[13] == 0x0) {
+			d->current_is_guessed_profile = 1;
+			/* Will yield a non-zero profile only after
+			   mmc_read_disc_info_al() was called */
+			mmc_guess_profile(d, 0);
+		}
 		return 0;
+	}
 	old_alloc_len = *alloc_len;
 	*alloc_len = len = mmc_four_char_to_int(c.page->data);
 	if (len > old_alloc_len)
@@ -2328,7 +2393,7 @@ static int mmc_get_configuration_al(struct burn_drive *d, int *alloc_len)
 #endif
 
 /* Enable this to get loud and repeated reports about the feature set :
-#define Libburn_print_feature_descriptorS 1
+ #define Libburn_print_feature_descriptorS 1
 */
 	/* ts A70127 : Interpret list of profile and feature descriptors.
  	see mmc5r03c.pdf 5.2
@@ -2342,7 +2407,7 @@ static int mmc_get_configuration_al(struct burn_drive *d, int *alloc_len)
 	"-----------------------------------------------------------------\n");
 	fprintf(stderr,
 	  "LIBBURN_EXPERIMENTAL : feature list length = %d , shown = %d\n",
-		len, up_to - c.page->data);
+		len, (int) (up_to - c.page->data));
 #endif /* Libburn_print_feature_descriptorS */
 
 	for (descr = c.page->data + 8; descr + 3 < up_to; descr += descr_len) {
@@ -2360,8 +2425,14 @@ static int mmc_get_configuration_al(struct burn_drive *d, int *alloc_len)
 
 		if (feature_code == 0x0) {
 			prf_end = descr + 4 + descr[3];
+			d->num_profiles = descr[3] / 4;
+			if (d->num_profiles > 64)
+				d->num_profiles = 64;
+			if (d->num_profiles > 0)
+				memcpy(d->all_profiles, descr + 4,
+							d->num_profiles * 4);
 			for (prf = descr + 4; prf + 2 < prf_end; prf += 4) {
-				if (only_current && !(prf[2] & 1))
+				if (only_current_profile && !(prf[2] & 1))
 			continue;
 				prf_number =  (prf[0] << 8) | prf[1];
 
@@ -3475,6 +3546,14 @@ static int mmc_get_write_performance_al(struct burn_drive *d,
 	c.page->bytes = 0;
 	c.dir = FROM_DRIVE;
 	d->issue_command(d, &c);
+
+#ifdef Libisofs_simulate_old_mmc1_drivE
+	c.error = 1;
+	c.sense[2] = 0x5;
+	c.sense[12] = 0x20;
+	c.sense[13] = 0x0;
+#endif /* Libisofs_simulate_old_mmc1_drivE */	
+
 	if (c.error)
 		return 0;
         len = mmc_four_char_to_int(c.page->data);
@@ -3804,12 +3883,15 @@ int mmc_setup_drive(struct burn_drive *d)
 	d->start_lba = -2000000000;
 	d->end_lba = -2000000000;
 
-	/* ts A61201 - A70223*/
+	/* ts A61201 - A90815*/
 	d->erasable = 0;
 	d->current_profile = -1;
 	d->current_profile_text[0] = 0;
 	d->current_is_cd_profile = 0;
 	d->current_is_supported_profile = 0;
+	d->current_is_guessed_profile = 0;
+	memset(d->all_profiles, 0, 256);
+	d->num_profiles = 0;
 	d->current_has_feat21h = 0;
 	d->current_feat21h_link_size = -1;
 	d->current_feat23h_byte4 = 0;

libburn/mmc.h

@@ -75,6 +75,9 @@ int mmc_read_10(struct burn_drive *d, int start, int amount,
 /* ts A81210 : Determine the upper limit of readable data size */
 int mmc_read_capacity(struct burn_drive *d);
 
+/* ts A61201 */
+char *mmc_obtain_profile_name(int profile_number);
+
 
 /* mmc5r03c.pdf 4.3.4.4.1 d) "The maximum number of RZones is 2 302." */
 #define BURN_MMC_FAKE_TOC_MAX_SIZE 2302

libburn/options.c

@@ -143,7 +143,7 @@ int burn_write_opts_set_simulate(struct burn_write_opts *opts, int sim)
 int burn_write_opts_set_underrun_proof(struct burn_write_opts *opts,
 				       int underrun_proof)
 {
-	if (!opts->drive->mdata->valid)
+	if (opts->drive->mdata->valid <= 0)
 		return 0;
 	if (opts->drive->mdata->underrun_proof) {
 		opts->underrun_proof = underrun_proof;

libburn/sbc.c

@@ -21,6 +21,7 @@ int mmc_function_spy(struct burn_drive *d, char * text);
 static unsigned char SBC_LOAD[] = { 0x1b, 0, 0, 0, 3, 0 };
 static unsigned char SBC_UNLOAD[] = { 0x1b, 0, 0, 0, 2, 0 };
 static unsigned char SBC_START_UNIT[] = { 0x1b, 0, 0, 0, 1, 0 };
+static unsigned char SBC_STOP_UNIT[] = { 0x1b, 0, 0, 0, 0, 0 };
 
 void sbc_load(struct burn_drive *d)
 {
@@ -79,28 +80,46 @@ void sbc_eject(struct burn_drive *d)
 int sbc_start_unit(struct burn_drive *d)
 {
 	struct command c;
+	int ret;
 
 	if (mmc_function_spy(d, "start_unit") <= 0)
 		return 0;
 
 	scsi_init_command(&c, SBC_START_UNIT, sizeof(SBC_START_UNIT));
-/*
-	memcpy(c.opcode, SBC_START_UNIT, sizeof(SBC_START_UNIT));
-	c.oplen = sizeof(SBC_START_UNIT);
-	c.page = NULL;
-*/
 	c.retry = 1;
-
 	c.opcode[1] |= 1; /* ts A70918 : Immed */
-
 	c.dir = NO_TRANSFER;
 	d->issue_command(d, &c);
 	if (c.error)
 		return 0;
 	/* ts A70918 : now asynchronous */
-	return spc_wait_unit_attention(d, 1800, "START UNIT", 0);
+	d->is_stopped = 0;
+	ret = spc_wait_unit_attention(d, 1800, "START UNIT", 0);
+	return ret;
 }
 
+/* ts A90824 : Trying to reduce drive noise */
+int sbc_stop_unit(struct burn_drive *d)
+{
+	struct command c;
+	int ret;
+
+	if (mmc_function_spy(d, "stop_unit") <= 0)
+		return 0;
+
+	scsi_init_command(&c, SBC_STOP_UNIT, sizeof(SBC_STOP_UNIT));
+	c.retry = 1;
+	c.opcode[1] |= 1; /* Immed */
+	c.dir = NO_TRANSFER;
+	d->issue_command(d, &c);
+	if (c.error)
+		return 0;
+	ret = spc_wait_unit_attention(d, 1800, "STOP UNIT", 0);
+	d->is_stopped = 1;
+	return ret;
+}
+
+
 
 /* ts A61021 : the sbc specific part of sg.c:enumerate_common()
 */
@@ -109,6 +128,8 @@ int sbc_setup_drive(struct burn_drive *d)
 	d->eject = sbc_eject;
 	d->load = sbc_load;
 	d->start_unit = sbc_start_unit;
+	d->stop_unit = sbc_stop_unit;
+	d->is_stopped = 0;
 	return 1;
 }
 

libburn/sg-freebsd.c

@@ -1,6 +1,5 @@
 /* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */
 
-#include <assert.h>
 #include <errno.h>
 #include <unistd.h>
 #include <stdio.h>
@@ -553,11 +552,26 @@ int sg_issue_command(struct burn_drive *d, struct command *c)
 	if (c->page) {
 		ccb->csio.data_ptr  = c->page->data;
 		if (c->dir == FROM_DRIVE) {
-			ccb->csio.dxfer_len = BUFFER_SIZE;
+
+			/* ts A90430 : Ticket 148 , by jwehle :
+			   "On ... FreeBSD 6.4 which has a usb memory reader in
+			    addition to a ATAPI DVD burner sg_issue_command
+			    will hang while the SCSI bus is being scanned"
+			*/
+			if (c->dxfer_len >= 0)
+				ccb->csio.dxfer_len = c->dxfer_len;
+			else
+				ccb->csio.dxfer_len = BUFFER_SIZE;
+
 /* touch page so we can use valgrind */
 			memset(c->page->data, 0, BUFFER_SIZE);
 		} else {
-			assert(c->page->bytes > 0);
+			/* ts A90430 */
+			/* a ssert(c->page->bytes > 0); */
+			if (c->page->bytes <= 0) {
+				c->error = 1;
+				return 0;
+			}
 			ccb->csio.dxfer_len = c->page->bytes;
 		}
 	} else {

libburn/sg-linux.c

@@ -470,7 +470,7 @@ static int sg_fcntl_lock(int *fd, char *fd_name, int l_type, int verbous)
 /* ts A60926 */
 static int sg_open_drive_fd(char *fname, int scan_mode)
 {
-	int open_mode = O_RDWR, fd;
+	int open_mode = O_RDWR, fd, tries= 0;
 	char msg[81];
 
 	/* ts A70409 : DDLP-B */
@@ -502,7 +502,8 @@ static int sg_open_drive_fd(char *fname, int scan_mode)
 		"libburn: experimental: O_EXCL= %d , O_NDELAY= %d\n",
 		!!(open_mode&O_EXCL),!!(open_mode&O_NDELAY));
 */
-          
+
+try_open:;
 	fd = open(fname, open_mode);
 	if (fd == -1) {
 /* <<< debugging
@@ -511,6 +512,17 @@ static int sg_open_drive_fd(char *fname, int scan_mode)
 			fname,errno);
 */
 		if (errno == EBUSY) {
+			tries++;
+
+/* <<< debugging
+			fprintf(stderr,
+				"\nlibburn_DEBUG: EBUSY , tries= %d\n", tries);
+*/
+
+			if (tries < 4) {
+				usleep(2000000);
+				goto try_open;
+			}
 			sg_handle_busy_device(fname, errno);
 			return -1;
 			
@@ -793,7 +805,7 @@ static int is_scsi_drive(char *fname, int *bus_no, int *host_no,
 		if (ret<=0) {
 			if (linux_sg_enumerate_debug)
 				fprintf(stderr, "cannot lock siblings\n"); 
-				sg_handle_busy_device(fname, 0);
+			sg_handle_busy_device(fname, 0);
 			return 0;
 		}
 		/* the final occupation will be done in sg_grab() */

libburn/spc.c

@@ -291,7 +291,7 @@ void spc_allow(struct burn_drive *d)
 }
 
 /*
-ts A70518 : Do not call with *alloc_len < 8
+ts A70518 - A90603 : Do not call with *alloc_len < 10
 */
 /** flag&1= do only inquire alloc_len */
 static int spc_sense_caps_al(struct burn_drive *d, int *alloc_len, int flag)
@@ -303,13 +303,19 @@ static int spc_sense_caps_al(struct burn_drive *d, int *alloc_len, int flag)
 	unsigned char *page;
 	struct command c;
 	struct burn_speed_descriptor *sd;
+	char msg[BURN_DRIVE_ADR_LEN + 160];
 
 	/* ts A61225 : 1 = report about post-MMC-1 speed descriptors */
 	static int speed_debug = 0;
 
-	if (*alloc_len < 8)
+	if (*alloc_len < 10)
 		return 0;
 
+	/* ts A90602 : Clearing mdata before command execution */
+	m = d->mdata;
+	m->valid = 0;
+	burn_mdata_free_subs(m);
+
 	memset(&buf, 0, sizeof(buf));
 	scsi_init_command(&c, SPC_MODE_SENSE, sizeof(SPC_MODE_SENSE));
 /*
@@ -328,12 +334,11 @@ static int spc_sense_caps_al(struct burn_drive *d, int *alloc_len, int flag)
 	d->issue_command(d, &c);
 	if (c.error) {
 		memset(&buf, 0, sizeof(buf));
-		d->mdata->valid = -1;
+		m->valid = -1;
 		was_error = 1;
 	}
 
 	size = c.page->data[0] * 256 + c.page->data[1];
-	m = d->mdata;
 	page = c.page->data + 8;
 
 	/* ts A61225 :
@@ -342,18 +347,28 @@ static int spc_sense_caps_al(struct burn_drive *d, int *alloc_len, int flag)
 	   in MMC-3 6.3.11 there are at least 28 bytes plus a variable length
 	   set of speed descriptors. In MMC-5 E.11 it is declared "legacy".
 	*/
+	/* ts A90603 :
+	   SPC-1 8.3.3 enumerates mode page format bytes from 0 to n and
+	   defines Page Length as (n-1).
+	*/
 	page_length = page[1];
 	old_alloc_len = *alloc_len;
-	*alloc_len = page_length + 8;
+	*alloc_len = page_length + 10;
 	if (flag & 1)
 		return !was_error;
-	if (page_length + 8 > old_alloc_len)
-		page_length = old_alloc_len - 8;
-	if (page_length < 22)
-		return 0;
+	if (page_length + 10 > old_alloc_len)
+		page_length = old_alloc_len - 10;
 
-	m->valid = 0;
-	burn_mdata_free_subs(m);
+	/* ts A90602 : 20 asserts page[21]. (see SPC-1 8.3.3) */
+	if (page_length < 20) {
+		m->valid = -1;
+		sprintf(msg, "MODE SENSE page 2A too short: %s : %d",
+			d->devname, page_length);
+		libdax_msgs_submit(libdax_messenger, d->global_index,
+				0x0002016e, LIBDAX_MSGS_SEV_DEBUG,
+				LIBDAX_MSGS_PRIO_LOW, msg, 0, 0);
+		return 0;
+	}
 
 	m->buffer_size = page[12] * 256 + page[13];
 	m->dvdram_read = page[2] & 32;
@@ -384,12 +399,13 @@ static int spc_sense_caps_al(struct burn_drive *d, int *alloc_len, int flag)
 	m->min_end_lba = 0x7fffffff;
 	m->max_end_lba = 0;
 
-	m->valid = 1;
+	if (!was_error)
+		m->valid = 1;
 
 	mmc_get_configuration(d);
 
 	/* ts A61225 : end of MMC-1 , begin of MMC-3 */
-	if (page_length < 32) /* no write speed descriptors ? */
+	if (page_length < 30) /* no write speed descriptors ? */
 		goto try_mmc_get_performance;
 
 	m->cur_write_speed = page[28] * 256 + page[29];
@@ -413,12 +429,12 @@ static int spc_sense_caps_al(struct burn_drive *d, int *alloc_len, int flag)
 	}
 
 	for (i = 0; i < num_write_speeds; i++) {
-		speed = page[32 + 4*i + 2] * 256 + page[32 + 4*i + 3];
+		speed = page[32 + 4 * i + 2] * 256 + page[32 + 4 * i + 3];
 
 		if (speed_debug) 
 		fprintf(stderr,
 			"LIBBURN_DEBUG: write speed #%d = %d kB/s  (rc %d)\n",
-			i, speed, page[32 + 4*i +1] & 7);
+			i, speed, page[32 + 4 * i + 1] & 7);
 
 		/* ts A61226 */
 		ret = burn_speed_descriptor_new(&(d->mdata->speed_descriptors),
@@ -431,7 +447,7 @@ static int spc_sense_caps_al(struct burn_drive *d, int *alloc_len, int flag)
 				strcpy(sd->profile_name,
 					d->current_profile_text);
 			}
-			sd->wrc = (( page[32 + 4*i +1] & 7 ) == 1 );
+			sd->wrc = (( page[32 + 4 * i + 1] & 7 ) == 1 );
 			sd->write_speed = speed;
 		}
 
@@ -447,19 +463,31 @@ static int spc_sense_caps_al(struct burn_drive *d, int *alloc_len, int flag)
 		m->min_write_speed, m->max_write_speed);
 
 try_mmc_get_performance:;
-	ret = mmc_get_write_performance(d);
-
-	if (ret > 0 && speed_debug)
-		fprintf(stderr,
+	if (m->cdrw_write || page_length >= 32) {
+		/* ts A90823:
+		   One has to avoid U3 enhanced memory sticks here. On my
+		   SuSE 10.2 a SanDisk Cruzer 4GB stalls at the second occasion
+		   of ACh GET PERFORMANCE. (The first one is obviously called
+		   by the OS at plug time.)
+		   This pseudo drive returns no write capabilities and a page
+		   length of 28. MMC-3 describes page length 32. Regrettably
+		   MMC-2 prescribes a page length of 26. Here i have to trust
+		   m->cdrw_write to reliably indicate any MMC-2 burner.
+		*/
+		ret = mmc_get_write_performance(d);
+		if (ret > 0 && speed_debug)
+			fprintf(stderr,
 	  "LIBBURN_DEBUG: ACh min_write_speed = %d , max_write_speed = %d\n",
-		m->min_write_speed, m->max_write_speed);
+			m->min_write_speed, m->max_write_speed);
+	}
+
 	return !was_error;
 }
 
 
 void spc_sense_caps(struct burn_drive *d)
 {
-	int alloc_len, start_len = 22, ret;
+	int alloc_len, start_len = 30, ret;
 
 	if (mmc_function_spy(d, "sense_caps") <= 0)
 		return;
@@ -920,6 +948,18 @@ enum response scsi_error_msg(struct burn_drive *d, unsigned char *sense,
 		sprintf(msg,
 			"Logical unit is in the process of becoming ready");
 		return RETRY;
+	case 0x08:
+		if (*key != 4)
+			break;
+		if (*ascq == 0)
+			sprintf(msg, "Logical unit communication failure");
+		else if (*ascq == 1)
+			sprintf(msg, "Logical unit communication timeout");
+		else if (*ascq == 2)
+			sprintf(msg, "Logical unit communication parity error");
+		else if (*ascq == 3)
+			sprintf(msg, "Logical unit communication crc error");
+		return RETRY;
 	case 0x09:
 		if (*key != 4)
 			break;

libburn/transport.h

@@ -161,6 +161,11 @@ struct burn_drive
 	char current_profile_text[80];
 	int current_is_cd_profile;
 	int current_is_supported_profile;
+	/* ts A90603 */
+	int current_is_guessed_profile;
+	/* ts A90815 */
+	unsigned char all_profiles[256];
+	int num_profiles;
 
 	/* ts A70128 : MMC-to-MMC feature info from 46h for DVD-RW.
            Quite internal. Regard as opaque :)
@@ -312,6 +317,11 @@ struct burn_drive
 	void (*eject) (struct burn_drive *);
 	void (*load) (struct burn_drive *);
 	int (*start_unit) (struct burn_drive *);
+
+	/* ts A90824 : Calming down noisy drives */
+	int (*stop_unit) (struct burn_drive *);
+	int is_stopped;
+
 	void (*read_disc_info) (struct burn_drive *);
 	void (*read_sectors) (struct burn_drive *,
 			      int start,

libburn/write.c

@@ -1736,6 +1736,14 @@ int burn_dvd_write_sync(struct burn_write_opts *o,
 		o->obs_pad = 1; /* fill-up track's last 32k buffer */
 	}
 
+
+	/* <<< test only : Does this increase effective speed with USB ?
+		ts A90801 : 64kB: speed with 16x DVD-R is 12 rather than 8
+		>>> next try is 128 kB
+	o->obs = 128 * 1024;
+	*/
+
+
 	sprintf(msg, "dvd/bd Profile= %2.2Xh , obs= %d , obs_pad= %d",
 		d->current_profile, o->obs, o->obs_pad);
 	libdax_msgs_submit(libdax_messenger, d->global_index, 0x00000002,
@@ -1845,6 +1853,13 @@ int burn_stdio_read_source(struct burn_source *source, char *buf, int bufsize,
 int burn_stdio_write(int fd, char *buf, int count, struct burn_drive *d, 
 			 int flag)
 {
+	if (d->cancel)
+		return 0;
+/*
+fprintf(stderr, "libburn_DEBUG: write(%d, %lX, %d)\n",
+                fd, (unsigned long) buf, count);
+*/
+
 	if (write(fd, buf, count) != count) {
 		libdax_msgs_submit(libdax_messenger, d->global_index,
 			0x00020148,
@@ -2093,7 +2108,7 @@ void burn_disc_write_sync(struct burn_write_opts *o, struct burn_disc *disc)
 {
 	struct cue_sheet *sheet;
 	struct burn_drive *d = o->drive;
-	struct buffer buf, *buffer_mem = o->drive->buffer;
+	struct buffer *buffer_mem = o->drive->buffer;
 	struct burn_track *lt, *t;
 	int first = 1, i, ret, lba, nwa = 0, multi_mem;
 	off_t default_size;
@@ -2113,8 +2128,33 @@ void burn_disc_write_sync(struct burn_write_opts *o, struct burn_disc *disc)
 	else
 		d->stream_recording_start = 0;
 
-	d->buffer = &buf;
+	d->buffer = calloc(sizeof(struct buffer), 1);
+	if (d->buffer == NULL)
+		goto fail_wo_sync;
+
+
+/* >>> ts A90321
+
 	memset(d->buffer, 0, sizeof(struct buffer));
+
+fprintf(stderr, "libburn_DEBUG: d->buffer = %lX , size = %d\n",
+                (unsigned long) d->buffer, (int) sizeof(struct buffer));
+
+calloc() seems not to have the desired effect. valgrind warns:
+==18251== Syscall param write(buf) points to uninitialised byte(s)
+==18251==    at 0x5071DEB: (within /lib64/libpthread-2.5.so)
+==18251==    by 0x4723FA: burn_stdio_write (write.c:1850)
+==18251==    by 0x4725DC: burn_stdio_mmc_write (write.c:1894)
+==18251==    by 0x483B7A: get_sector (sector.c:229)
+==18251==    by 0x484F11: sector_data (sector.c:639)
+==18251==    by 0x4729FE: burn_stdio_write_track (write.c:2012)
+==18251==    by 0x472CF4: burn_stdio_write_sync (write.c:2072)
+==18251==    by 0x472E8D: burn_disc_write_sync (write.c:2125) <<< we are here
+==18251==    by 0x460254: write_disc_worker_func (async.c:514)
+==18251==    by 0x506B09D: start_thread (in /lib64/libpthread-2.5.so)
+==18251==    by 0x55484CC: clone (in /lib64/libc-2.5.so)
+*/
+
 	d->rlba = -150;
 	d->toc_temp = 9;
 
@@ -2312,6 +2352,8 @@ fail_wo_sync:;
 	d->busy = BURN_DRIVE_IDLE;
 ex:;
 	d->do_stream_recording = 0;
+	if (d->buffer != NULL)
+		free((char *) d->buffer);
 	d->buffer = buffer_mem;
 	return;
 }

test/libburner.c

@@ -106,7 +106,7 @@ int libburner_aquire_drive(char *drive_adr, int *driveno)
 		ret = libburner_aquire_by_adr(drive_adr);
 	else
 		ret = libburner_aquire_by_driveno(driveno);
-	if (ret <= 0)
+	if (ret <= 0 || *driveno <= 0)
 		return ret;
 	burn_disc_get_profile(drive_list[0].drive, &current_profile,
 				 current_profile_name);