Documented changes and release timestamp

COPYRIGHT

@@ -1,7 +1,7 @@
 Derek Foreman <derek@signalmarketing.com> and Ben Jansens <xor@orodu.net>
 Copyright (C) 2002-2006  Derek Foreman and Ben Jansens
 Mario Danic <mario.danic@gmail.com>, Thomas Schmitt <scdbackup@gmx.net>
-Copyright (C) 2006-2008 Mario Danic, Thomas Schmitt
+Copyright (C) 2006-2009 Mario Danic, Thomas Schmitt
 
 
     This program is free software; you can redistribute it and/or modify

Makefile.am

@@ -1,4 +1,8 @@
-pkgconfigdir=$(libdir)/pkgconfig
+
+# ts A90315 : LIBBURNIA_PKGCONFDIR is defined OS specific in acinclude.m4
+# was: pkgconfigdir=$(libdir)/pkgconfig
+pkgconfigdir=$(LIBBURNIA_PKGCONFDIR)
+
 libincludedir=$(includedir)/libburn
 
 lib_LTLIBRARIES = libburn/libburn.la 
@@ -82,32 +86,34 @@ noinst_PROGRAMS = \
 bin_PROGRAMS = \
 	cdrskin/cdrskin
 
+LIBBURN_EXTRALIBS = $(LIBBURN_ARCH_LIBS) $(THREAD_LIBS)
+
 test_libburner_CPPFLAGS = -Ilibburn
-test_libburner_LDADD = $(libburn_libburn_la_OBJECTS) $(THREAD_LIBS)
+test_libburner_LDADD = $(libburn_libburn_la_OBJECTS) $(LIBBURN_EXTRALIBS)
 test_libburner_SOURCES = test/libburner.c
 test_telltoc_CPPFLAGS = -Ilibburn
-test_telltoc_LDADD = $(libburn_libburn_la_OBJECTS) $(THREAD_LIBS)
+test_telltoc_LDADD = $(libburn_libburn_la_OBJECTS) $(LIBBURN_EXTRALIBS)
 test_telltoc_SOURCES = test/telltoc.c
 test_dewav_CPPFLAGS = -Ilibburn
-test_dewav_LDADD = $(libburn_libburn_la_OBJECTS) $(THREAD_LIBS)
+test_dewav_LDADD = $(libburn_libburn_la_OBJECTS) $(LIBBURN_EXTRALIBS)
 test_dewav_SOURCES = test/dewav.c
 test_fake_au_CPPFLAGS = 
 test_fake_au_LDADD =
 test_fake_au_SOURCES = test/fake_au.c
 test_poll_CPPFLAGS = -Ilibburn
-test_poll_LDADD = $(libburn_libburn_la_OBJECTS) $(THREAD_LIBS)
+test_poll_LDADD = $(libburn_libburn_la_OBJECTS) $(LIBBURN_EXTRALIBS)
 test_poll_SOURCES = test/poll.c
 test_structest_CPPFLAGS = -Ilibburn
-test_structest_LDADD = $(libburn_libburn_la_OBJECTS) $(THREAD_LIBS)
+test_structest_LDADD = $(libburn_libburn_la_OBJECTS) $(LIBBURN_EXTRALIBS)
 test_structest_SOURCES = test/structest.c
 
-##  cdrskin construction site - ts A60816 - A81207
+##  cdrskin construction site - ts A60816 - A90507
 cdrskin_cdrskin_CPPFLAGS = -Ilibburn
-cdrskin_cdrskin_CFLAGS = -DCdrskin_libburn_0_5_9
+cdrskin_cdrskin_CFLAGS = -DCdrskin_libburn_0_6_8
 
-# cdrskin_cdrskin_LDADD = $(libburn_libburn_la_OBJECTS) $(THREAD_LIBS)
+# cdrskin_cdrskin_LDADD = $(libburn_libburn_la_OBJECTS) $(LIBBURN_EXTRALIBS)
 # ts A80123, change proposed by Simon Huggins to cause dynamic libburn linking
-cdrskin_cdrskin_LDADD = libburn/libburn.la $(THREAD_LIBS)
+cdrskin_cdrskin_LDADD = libburn/libburn.la $(LIBBURN_EXTRALIBS)
 
 cdrskin_cdrskin_SOURCES = cdrskin/cdrskin.c cdrskin/cdrfifo.c cdrskin/cdrfifo.h cdrskin/cdrskin_timestamp.h
 ##

README

@@ -6,12 +6,12 @@ This all is under GPL.
 ------------------------------------------------------------------------------
 libburn-project.org
 By Mario Danic <mario.danic@gmail.com> and Thomas Schmitt <scdbackup@gmx.net>
-Copyright (C) 2006-2008 Mario Danic, Thomas Schmitt
+Copyright (C) 2006-2009 Mario Danic, Thomas Schmitt
 Still containing parts of Libburn. By Derek Foreman <derek@signalmarketing.com>
 and Ben Jansens <xor@orodu.net>
 Copyright (C) 2002-2006  Derek Foreman and Ben Jansens
 
-     http://files.libburnia-project.org/releases/libburn-0.5.8.pl00.tar.gz
+     http://files.libburnia-project.org/releases/libburn-0.6.8.pl00.tar.gz
 
 ------------------------------------------------------------------------------
 
@@ -19,10 +19,10 @@ Copyright (C) 2002-2006  Derek Foreman and Ben Jansens
 
                                 From tarball
 
-Obtain libburn-0.5.8.pl00.tar.gz, take it to a directory of your choice and do:
+Obtain libburn-0.6.8.pl00.tar.gz, take it to a directory of your choice and do:
 
-   tar xzf libburn-0.5.8.pl00.tar.gz
-   cd libburn-0.5.8
+   tar xzf libburn-0.6.8.pl00.tar.gz
+   cd libburn-0.6.8
    ./configure --prefix=/usr
    make
 
@@ -35,6 +35,11 @@ and to install the cdrecord compatibility binary cdrskin, do
 This procedure installs libburn.so.4 and cdrskin depending on it.
 For a standalone cdrskin binary, see cdrskin/README.
 
+A behavioral conflict is known between any burn software and demons like hald
+which probe CD drives. This can spoil burn runs for CD-R or CD-RW.
+You may have to keep your hald away from the drive. See for example
+   http://www.freebsd.org/gnome/docs/halfaq.html
+
 
                                   From SVN
 
@@ -42,8 +47,8 @@ Our build system is based on autotools. For preparing the build of a SVN
 snapshot you will need autotools of at least version 1.7. 
 Do in a directory of your choice:
 
-   svn co http://svn.libburnia-project.org/libburn/trunk libburn-0.5.9
-   cd libburn-0.5.9
+   svn co http://svn.libburnia-project.org/libburn/trunk libburn-0.6.3
+   cd libburn-0.6.3
    ./bootstrap
    ./configure --prefix=/usr
    make
@@ -78,8 +83,10 @@ These are libraries, language bindings, and middleware binaries which emulate
 classical (and valuable) Linux tools.
 Currently it is supported on Linux with kernels >= 2.4 and on FreeBSD versions 
 with ATAPI/CAM support enabled in the kernel, see atapicam(4).
+On other X/Open compliant systems there will only be pseudo drives, but no
+direct MMC operation on real CD/DVD/BD drives.
 
-For ports to other systems we would need : login on a development machine
+For full ports to other systems we would need : login on a development machine
 resp. a live OS on CD or DVD, advise from a system person about the equivalent
 of Linux sg or FreeBSD CAM, volunteers for testing of realistic use cases.
 
@@ -153,6 +160,13 @@ libburn.so.4    (since 0.3.4, March    2007),
 libisofs.so.6   (since 0.6.2, February 2008),
 libisoburn.so.1 (since 0.1.0, February 2008).
 
+Applications must use 64 bit off_t. E.g. by defining
+#define _LARGEFILE_SOURCE
+#define _FILE_OFFSET_BITS 64
+or take special precautions to interface with the libraries by 64 bit integers
+where the .h files prescribe off_t. Not to use 64 bit file i/o will keep the
+application from producing and processing ISO images of more than 2 GB size.
+
 
 ------------------------------------------------------------------------------
 Project history as far as known to me:
@@ -348,6 +362,57 @@ Project history as far as known to me:
 
 - 9th Dec 2008 Our project received a donation from Thomas Weber.
 
+- 2nd Jan 2009 libburn-0.6.0 allows to format BD-R and to write to either
+  formatted or unformatted BD-R.
+
+- 6th Jan 2009 libisoburn-0.3.2. xorriso can produce and execute commands for
+  mounting older sessions from all kinds of media. Pseudo-drives outside the
+  /dev/ tree can be addressed without prefix "stdio:". 
+
+- 20th Feb 2009 libburn-0.6.2 source release now compiles out of the box
+  on FreeBSD.
+
+- 28 Feb 2009 libisofs-0.6.14 can record ACLs and Extended Attributes xattr
+  in its ISO images. 
+
+- 01 Mar 2009 libisoburn-0.3.4. xorriso makes use of the ACL and xattr
+  capabilities provided by libisofs for xorriso backup features.
+
+- 11 Mar 2009 libisofs-0.6.16 of libisofs fixes two bugs which on Solaris
+  prevented to navigate the ISO images by ".." and to recognize the Rock Ridge
+  extensions of ISO images. The ban to build libisofs on operating systems
+  other than Linux and FreeBSD has been lifted.
+
+- 13 Mar 2009 libburn-0.6.4 got a dummy adapter for SCSI/MMC command transport.
+  It will show no drives and thus libburn will only be able to perform
+  operations on "stdio:" pseudo drives. Nevertheless this allowed to lift the
+  ban to build libburn on operating systems other than Linux and FreeBSD.
+
+- 16 Mar 2009 libisoburn-0.3.6: xorriso uses RRIP version 1.10 as default 
+  in order to be mountable where mkisofs images are mountable.
+
+- 17 Apr 2009 libisofs-0.6.18 introduces content filtering of data files.
+  Built-in filters allow compression to formats gzip and zisofs. External
+  filter processes allow arbitrary data conversions like encryption.
+
+- 19 Apr 2009 libisoburn-0.3.8 makes use of the new libisofs capability to
+  perform content filtering of data files.
+
+- 08 May 2009 libburn-0.6.6 fixes a bug with aborting on broken output pipe
+  and a bug with device scan on FreeBSD.
+
+- 31 May 2009 libisofs-0.6.20 can record hard link relations in ISO images
+  and offers support with restoring them to disk. Current Linux kernels will
+  mount images with such hard links but will attribute a unique inode number
+  to each file.
+
+- 28 Jun 2009 libisoburn-0.4.0: xorriso can record and restore hard link
+  relations of files. Performance of data reading has been improved. Option
+  -find now supports logical operators with its tests.
+
+- 14 Jul 2009 libburn-0.6.8 fixes bugs and shortcommings with old MMC-1 drives
+  and with large SCSI bus numbers as handed out by Linux for USB drives.
+
 
 ------------------------------------------------------------------------------
 

acinclude.m4

@@ -1,9 +1,11 @@
 AC_DEFUN([TARGET_SHIZZLE],
 [
   ARCH=""
+  LIBBURNIA_PKGCONFDIR="$libdir"/pkgconfig
 
   AC_MSG_CHECKING([target operating system])
 
+  
   case $target in
     *-*-linux*)
       ARCH=linux
@@ -12,11 +14,66 @@ AC_DEFUN([TARGET_SHIZZLE],
     *-*-freebsd*)
       ARCH=freebsd
       LIBBURN_ARCH_LIBS=-lcam
+      LIBBURNIA_PKGCONFDIR=$(echo "$libdir" | sed 's/\/lib$/\/libdata/')/pkgconfig
       ;;
     *)
-      AC_ERROR([You are attempting to compile for an unsupported platform])
+      ARCH=
+      LIBBURN_ARCH_LIBS=
+#      AC_ERROR([You are attempting to compile for an unsupported platform])
       ;;
   esac
 
   AC_MSG_RESULT([$ARCH])
 ])
+
+
+dnl LIBBURNIA_SET_PKGCONFIG determines the install directory for the *.pc file.
+dnl Important: Must be performed _after_ TARGET_SHIZZLE
+dnl 
+AC_DEFUN([LIBBURNIA_SET_PKGCONFIG],
+[
+### for testing --enable-libdir-pkgconfig on Linux
+### LIBBURNIA_PKGCONFDIR="$libdir"data/pkgconfig
+
+if test "x$LIBBURNIA_PKGCONFDIR" = "x$libdir"/pkgconfig
+then
+  dummy=dummy
+else
+  AC_ARG_ENABLE(libdir-pkgconfig,
+  [  --enable-libdir-pkgconfig  Install to $libdir/pkgconfig on any OS, default=no],
+   , enable_libdir_pkgconfig="no")
+  AC_MSG_CHECKING([for --enable-libdir-pkgconfig])
+  if test "x$enable_libdir_pkgconfig" = xyes
+  then
+    LIBBURNIA_PKGCONFDIR="$libdir"/pkgconfig
+  fi
+  AC_MSG_RESULT([$enable_libdir_pkgconfig])
+fi
+
+libburnia_pkgconfig_override="no"
+AC_ARG_ENABLE(pkgconfig-path,
+[  --enable-pkgconfig-path=DIR  Absolute path of directory for libisofs-*.pc],
+libburnia_pkgconfig_override="yes" , enable_pkgconfig_path="none")
+AC_MSG_CHECKING([for overridden pkgconfig directory path])
+if test "x$enable_pkgconfig_path" = xno
+then
+  libburnia_pkgconfig_override="no"
+fi
+if test "x$enable_pkgconfig_path" = x -o "x$enable_pkgconfig_path" = xyes
+then
+  libburnia_pkgconfig_override="invalid argument"
+fi
+if test "x$libburnia_pkgconfig_override" = xyes
+then
+  LIBBURNIA_PKGCONFDIR="$enable_pkgconfig_path"
+  AC_MSG_RESULT([$LIBBURNIA_PKGCONFDIR])
+else
+  AC_MSG_RESULT([$libburnia_pkgconfig_override])
+fi
+AC_SUBST(LIBBURNIA_PKGCONFDIR)
+
+dnl For debugging only
+### AC_MSG_RESULT([LIBBURNIA_PKGCONFDIR = $LIBBURNIA_PKGCONFDIR])
+
+])
+

cdrskin/README

@@ -4,8 +4,9 @@
 cdrskin. By Thomas Schmitt <scdbackup@gmx.net>
 Integrated sub project of libburnia-project.org but also published via:
 http://scdbackup.sourceforge.net/cdrskin_eng.html
-http://scdbackup.sourceforge.net/cdrskin-0.5.9.tar.gz
-Copyright (C) 2006-2008 Thomas Schmitt, provided under GPL version 2.
+http://scdbackup.sourceforge.net/cdrskin-0.6.8.pl00.tar.gz
+
+Copyright (C) 2006-2009 Thomas Schmitt, provided under GPL version 2.
 ------------------------------------------------------------------------------
 
 
@@ -14,6 +15,8 @@ most of the libburn features from the command line.
 
 Currently it is supported on Linux with kernels >= 2.4 and on FreeBSD versions 
 with ATAPI/CAM support enabled in the kernel, see atapicam(4).
+On other X/Open compliant systems there will only be emulated drives, but no
+direct MMC operation on real CD/DVD/BD drives.
 
 By using this software you agree to the disclaimer at the end of this text
 "This software is provided as is. There is no warranty implied and ..."
@@ -21,10 +24,10 @@ By using this software you agree to the disclaimer at the end of this text
 
                    Compilation, First Glimpse, Installation
 
-Obtain cdrskin-0.5.9.tar.gz, take it to a directory of your choice and do:
+Obtain cdrskin-0.6.8.pl00.tar.gz, take it to a directory of your choice and do:
 
-    tar xzf cdrskin-0.5.9.tar.gz
-    cd cdrskin-0.5.9
+    tar xzf cdrskin-0.6.8.pl00.tar.gz
+    cd cdrskin-0.6.8
 
 Within that directory execute:
 
@@ -119,6 +122,11 @@ as listed device files. This addressing via e.g. /dev/sr0 or /dev/scd1 is
 compatible with generic read programs like dd and with write program growisofs.
 For finding /dev/sg1 from /dev/sr0, the program needs rw-access to both files.
 
+A behavioral conflict is known between any burn software and demons like hald
+which probe CD drives. This can spoil burn runs for CD-R or CD-RW.
+You may have to keep your hald away from the drive. See for example
+   http://www.freebsd.org/gnome/docs/halfaq.html
+
 
                                 Usage examples 
 
@@ -281,6 +289,9 @@ nominal speed by option "stream_recording=on".
 In this case bad blocks are not detected during write and not even previously
 known bad blocks are avoided. So you have to make your own readability tests
 and go back to half speed as soon as the first read errors show up.
+Instead of "on" one may also set a start address for stream recording.
+Like "stream_recording=100m". This will write slowly to the first 100 MB of
+the media and accelerate when writing to higher addresses.
 
 Option --grow_overwriteable_iso allows -multi (although unneeded), enables
 -msinfo and -toc, and makes blank=fast an invalidator for ISO filesystems
@@ -418,7 +429,7 @@ are the cause. Any mistake of the burn program is supposed to be caught
 by the drive's firmware and to lead to mere misburns.
 The worst mishaps which hit the author imposed the need to reboot the
 system because of drives gnawing endlessly on ill media. Permanent hardware
-damage did not occur in 2.5 years of development. But one never knows ...
+damage did not occur in 3.5 years of development. But one never knows ...
 
 ------------------------------------------------------------------------------
 
@@ -446,7 +457,7 @@ contributions in a due way.
 Based on and sub project of:
 libburnia-project.org
 By Mario Danic <mario.danic@gmail.com> and Thomas Schmitt <scdbackup@gmx.net>
-Copyright (C) 2006-2008 Mario Danic, Thomas Schmitt
+Copyright (C) 2006-2009 Mario Danic, Thomas Schmitt
 
 libburnia-project.org is inspired by and in other components still containing
 parts of

cdrskin/add_ts_changes_to_libburn_0_6_8

@@ -38,7 +38,7 @@ original="./libburn_svn_release.tgz"
 # My changes are in $changes , mainly in $changes/cdrskin
 changes="./libburn-release"
 
-skin_release="0.5.8"
+skin_release="0.6.8"
 patch_level=".pl00"
 skin_rev="$skin_release""$patch_level"
 

cdrskin/add_ts_changes_to_libburn_0_6_9

@@ -38,7 +38,7 @@ original="./libburn_svn.tgz"
 # My changes are in $changes , mainly in $changes/cdrskin
 changes="./libburn-develop"
 
-skin_release="0.5.9"
+skin_release="0.6.9"
 patch_level=""
 skin_rev="$skin_release""$patch_level"
 

cdrskin/cdrskin.1

@@ -2,7 +2,7 @@
 .\" First parameter, NAME, should be all caps
 .\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
 .\" other parameters are allowed: see man(7), man(1)
-.TH CDRSKIN 1 "Dec 10, 2008"
+.TH CDRSKIN 1 "May 07, 2009"
 .\" Please adjust this date whenever revising the manpage.
 .\"
 .\" Some roff macros, for reference:
@@ -67,7 +67,7 @@ Write mode selection
 .br
 Recordable CD Media
 .br
-Sequentially Recordable DVD Media
+Sequentially Recordable DVD or BD Media
 .br
 Overwriteable DVD or BD Media
 .br
@@ -167,9 +167,10 @@ needed.
 .B Sequentially Recordable DVD or BD Media:
 .br
 Currently DVD-RW, DVD-R , DVD+R[/DL], and BD-R can be used for the Sequential
-recording model.
+recording model. It resembles the model of CD media. Only DVD-RW can be
+blanked and re-used from scratch.
 .br
-This applies to DVD-RW only if they are in state "Sequential Recording".
+DVD-RW are sequential media if they are in state "Sequential Recording".
 The media must be either blank or appendable.
 Newly purchased DVD-RW and DVD-R media are in this state.
 Used DVD-RW get into blank sequential state by option
@@ -253,7 +254,7 @@ that it has to be formatted again. If in doubt, just give it a try.
 .SS
 .B Drive preparation and addressing:
 .br
-The drives, either CD burners or DVD burners, are accessed via addresses which
+The drives, CD, DVD, or BD burners, are accessed via addresses which
 are specific to libburn and the operating system. Those addresses get listed
 by a run of \fBcdrskin --devices\fP.
 .br
@@ -637,8 +638,8 @@ To have a chance for working on overwriteable media, this option has to be
 accompanied by option --grow_overwriteable_iso.
 .TP
 .BI \-multi
-This option keeps the CD or unformatted DVD-R[W] appendable after the current
-session has been written.
+This option keeps CD, unformatted DVD-R[W], DVD+R, or BD-R appendable
+after the current session has been written.
 Without it the disc gets closed and may not be written any more  - unless it
 is a -RW and gets blanked which causes loss of its content.
 .br
@@ -686,8 +687,8 @@ then behave strange or even go bad for the next few attempts to burn a CD.
 One should use it only if inavoidable.
 .TP
 .BI \-sao
-Write CD in Session At Once mode, a sequential DVD-R[W] in Disc-at-once
-(DAO) mode, or a DVD+R[/DL].
+Write CD in Session At Once mode or sequential DVD-R[W] in Disc-at-once
+(DAO) mode.
 .br
 With CD this mode is able to put several audio tracks on media without
 producing audible gaps between them.
@@ -695,7 +696,7 @@ producing audible gaps between them.
 With DVD-R[W] this mode can only write a single track.
 No -multi is allowed with DVD-R[W] -sao.
 .br
--sao is permissible with overwriteable DVD, BD or DVD+R[/DL] but actually
+-sao is permissible with overwriteable DVD, or DVD+R[/DL], or BD but actually
 only imposes restrictions without providing known advantages. 
 .br
 -sao can only be used for tracks of fixely predicted size. This implies that
@@ -1185,13 +1186,15 @@ Use and report literal Bus,Target,Lun addresses rather than real SCSI and
 pseudo ATA addresses. This method is outdated and was never compatible with
 original cdrecord.
 .TP
-.BI stream_recording="on"|"off"
+.BI stream_recording="on"|"off"|number
 By setting "on" request that compliance to the desired speed setting is
 preferred over management of write errors. With DVD-RAM and BD this can
 bring effective write speed near to the nominal write speed of the media.
 But it will also disable the automatic use of replacement blocks
 if write errors occur. It might as well be disliked or ignored by the drive.
 .br
+If a number is given, then error management stays enabled for all byte
+addresses below that number. Any number below 16s is the same as "off".
 .SH EXAMPLES
 .SS
 .B Get an overview of drives and their addresses:
@@ -1236,15 +1239,15 @@ cdrskin -v dev=0,1,0 fs=32m speed=8 \\
 .br
 blank=as_needed padsize=300k -
 .SS
-.B Write multi-session to the same CD, DVD-R[W] or DVD+R[/DL]:
+.B Write multi-session to the same CD, DVD-R[W], DVD+R[/DL], or BD-R:
 .br
-cdrskin dev=/dev/hdc -v padsize=300k -multi 1.iso
+cdrskin dev=/dev/sr0 -v padsize=300k -multi 1.iso
 .br
-cdrskin dev=/dev/hdc -v padsize=300k -multi 2.iso
+cdrskin dev=/dev/sr0 -v padsize=300k -multi 2.iso
 .br
-cdrskin dev=/dev/hdc -v padsize=300k -multi 3.iso
+cdrskin dev=/dev/sr0 -v padsize=300k -multi 3.iso
 .br
-cdrskin dev=/dev/hdc -v padsize=300k 4.iso
+cdrskin dev=/dev/sr0 -v padsize=300k 4.iso
 .SS
 .B Get multi-session info for option -C of program mkisofs:
 .br

cdrskin/cdrskin.c

@@ -1,6 +1,6 @@
 
 /*
- cdrskin.c , Copyright 2006-2008 Thomas Schmitt <scdbackup@gmx.net>
+ cdrskin.c , Copyright 2006-2009 Thomas Schmitt <scdbackup@gmx.net>
 Provided under GPL version 2. See future commitment below.
 
 A cdrecord compatible command line interface for libburn.
@@ -88,7 +88,7 @@ or
 
 /** The official program version */
 #ifndef Cdrskin_prog_versioN
-#define Cdrskin_prog_versioN "0.5.9"
+#define Cdrskin_prog_versioN "0.6.8"
 #endif
 
 /** The official libburn interface revision to use.
@@ -98,7 +98,7 @@ or
 #define Cdrskin_libburn_majoR 0
 #endif
 #ifndef Cdrskin_libburn_minoR
-#define Cdrskin_libburn_minoR 5
+#define Cdrskin_libburn_minoR 6
 #endif
 #ifndef Cdrskin_libburn_micrO
 #define Cdrskin_libburn_micrO 8
@@ -135,43 +135,43 @@ or
 #endif /* Cdrskin_libburn_cvs_A60220_tS */
 
 
-#ifdef Cdrskin_libburn_0_5_8
-#define Cdrskin_libburn_versioN "0.5.8"
+#ifdef Cdrskin_libburn_0_6_8
+#define Cdrskin_libburn_versioN "0.6.8"
 #define Cdrskin_libburn_from_pykix_svN 1
-#endif /* Cdrskin_libburn_0_5_8 */
+#endif /* Cdrskin_libburn_0_6_8 */
 
-#ifdef Cdrskin_libburn_0_5_9
-#define Cdrskin_libburn_versioN "0.5.9"
+#ifdef Cdrskin_libburn_0_6_9
+#define Cdrskin_libburn_versioN "0.6.9"
 #define Cdrskin_libburn_from_pykix_svN 1
 
 /* Place novelty switch macros here. 
    Move them down to Cdrskin_libburn_from_pykix_svN on version leap
 */
 
-/* there are no libburn novelties in 0.5.9 yet */
+/* there are no libburn novelties yet */
 
-#endif /* Cdrskin_libburn_0_5_9 */
+#endif /* Cdrskin_libburn_0_6_9 */
 
 #ifndef Cdrskin_libburn_versioN
-#define Cdrskin_libburn_0_5_8
-#define Cdrskin_libburn_versioN "0.5.8"
+#define Cdrskin_libburn_0_6_8
+#define Cdrskin_libburn_versioN "0.6.8"
 #define Cdrskin_libburn_from_pykix_svN 1
 #endif
 
-#ifdef Cdrskin_libburn_0_5_8
+#ifdef Cdrskin_libburn_0_6_8
 #undef Cdrskin_libburn_majoR
 #undef Cdrskin_libburn_minoR
 #undef Cdrskin_libburn_micrO
 #define Cdrskin_libburn_majoR 0
-#define Cdrskin_libburn_minoR 5
+#define Cdrskin_libburn_minoR 6
 #define Cdrskin_libburn_micrO 8
 #endif
-#ifdef Cdrskin_libburn_0_5_9
+#ifdef Cdrskin_libburn_0_6_9
 #undef Cdrskin_libburn_majoR
 #undef Cdrskin_libburn_minoR
 #undef Cdrskin_libburn_micrO
 #define Cdrskin_libburn_majoR 0
-#define Cdrskin_libburn_minoR 5
+#define Cdrskin_libburn_minoR 6
 #define Cdrskin_libburn_micrO 9
 #endif
 
@@ -251,9 +251,15 @@ or
 /* 0.4.8 */
 /* Bug fix release for  write_start_address=... on DVD-RAM and BD-RE */
 
-/* 0.5.0 , 0.5.2 , 0.5.4 , 0.5.6 , 0.5.8 */
+/* 0.5.0 , 0.5.2 , 0.5.4 , 0.5.6 , 0.5.8 , 0.6.0 , 0.6.2 */
 /* novel libburn features are transparent to cdrskin */
 
+/* 0.6.4 */
+/* Ended to mark novelties by macros.
+   libburnia libburn and cdrskin are fixely in sync now.
+   icculus libburn did not move for 30 months.
+*/
+
 
 #ifdef Cdrskin_new_api_tesT
 
@@ -2692,10 +2698,13 @@ set_dev:;
           " --single_track     accept only last argument as source_address\n");
 
 #ifdef Cdrskin_libburn_has_stream_recordinG
+     printf(" stream_recording=\"on\"|\"off\"|number\n");
      printf(
-        " stream_recording=\"on\"|\"off\"  \"on\" requests to prefer speed\n");
+         "                    \"on\" requests to prefer speed over write\n");
      printf(
-        "                                  over write error management.\n");
+         "                    error management. A number prevents this with\n");
+     printf(
+         "                    byte addresses below that number.\n");
 #endif
 
 #ifdef Cdrskin_allow_libburn_taO
@@ -2892,7 +2901,7 @@ set_severities:;
      int major, minor, micro;
 
      printf(
-"Cdrecord 2.01-Emulation Copyright (C) 2006-2008, see libburnia-project.org\n");
+"Cdrecord 2.01-Emulation Copyright (C) 2006-2009, see libburnia-project.org\n");
      printf("libburn interface :  %d.%d.%d\n",
             burn_header_version_major, burn_header_version_minor,
             burn_header_version_micro);
@@ -3120,7 +3129,7 @@ struct CdrskiN {
  int gracetime;
  int dummy_mode;
  int force_is_set;
- int stream_recording_is_set;
+ int stream_recording_is_set; /* see burn_write_opts_set_stream_recording() */
  int single_track;
  int prodvd_cli_compatible;
 
@@ -4399,13 +4408,15 @@ int Cdrskin_report_disc_status(struct CdrskiN *skin, enum burn_disc_status s,
 int Cdrskin_scanbus(struct CdrskiN *skin, int flag)
 {
  int ret,i,busno,first_on_bus,pseudo_transport_group= 0,skipped_devices= 0;
- int busmax= 16;
+ int busmax= 16, busidx;
  char shellsafe[5*Cdrskin_strleN+2],perms[40],btldev[Cdrskin_adrleN];
  char adr[Cdrskin_adrleN],*raw_dev,*drives_shown= NULL;
+ int *drives_busses= NULL;
  struct stat stbuf;
 
  drives_shown= malloc(skin->n_drives+1);
- if(drives_shown==NULL)
+ drives_busses= malloc((skin->n_drives+1) * sizeof(int));
+ if(drives_shown == NULL || drives_busses == NULL)
    {ret= -1; goto ex;}
  for(i=0;i<skin->n_drives;i++)
    drives_shown[i]= 0;
@@ -4463,7 +4474,28 @@ int Cdrskin_scanbus(struct CdrskiN *skin, int flag)
    if(skin->preskin->old_pseudo_scsi_adr)
      printf("cdrskin: NOTE : The printed addresses are not cdrecord compatible !\n");
 
-   for(busno= 0;busno<=busmax;busno++) {
+   for(i=0;i<skin->n_drives;i++) {
+     drives_busses[i]= -1;
+     ret= Cdrskin_driveno_to_btldev(skin,i,btldev,1);
+     if(ret >= pseudo_transport_group &&
+        ret < pseudo_transport_group + 1000000) {
+       drives_busses[i]= ret - pseudo_transport_group;
+       if(ret > pseudo_transport_group + busmax)
+         busmax= 1 + ret - pseudo_transport_group;
+     }
+   }
+   for(busidx= 0; busidx < skin->n_drives + 1; busidx++) {
+     if(busidx < skin->n_drives)
+       busno= drives_busses[busidx];
+     else
+       busno= busmax;
+     if(busno < 0)
+   continue;
+     for(i= 0; i < busidx; i++)
+       if(drives_busses[i] == busno)
+     break;
+     if(i < busidx)
+   continue;
      first_on_bus= 1;
      for(i=0;i<skin->n_drives;i++) {
        ret= Cdrskin_driveno_to_btldev(skin,i,btldev,1);
@@ -4501,6 +4533,8 @@ int Cdrskin_scanbus(struct CdrskiN *skin, int flag)
 ex:;
  if(drives_shown!=NULL)
    free((char *) drives_shown);
+ if(drives_busses!=NULL)
+   free((char *) drives_busses);
  return(ret);
 }
 
@@ -6466,7 +6500,7 @@ burn_failed:;
  burn_write_opts_set_force(o, !!skin->force_is_set);
 #endif
 #ifdef Cdrskin_libburn_has_stream_recordinG
- burn_write_opts_set_stream_recording(o, !!skin->stream_recording_is_set);
+ burn_write_opts_set_stream_recording(o, skin->stream_recording_is_set);
 #endif
 
  if(skin->dummy_mode) {
@@ -6988,7 +7022,7 @@ sorry_failed_to_eject:;
 int Cdrskin_setup(struct CdrskiN *skin, int argc, char **argv, int flag)
 {
  int i,k,l,ret,source_has_size=0, idx= -1;
- double value,grab_and_wait_value= -1.0;
+ double value,grab_and_wait_value= -1.0, num;
  char *cpt,*value_pt,adr[Cdrskin_adrleN],*blank_mode= "";
  struct stat stbuf;
 
@@ -7725,9 +7759,15 @@ set_speed:;
 set_stream_recording:;
      if(strcmp(value_pt, "on")==0)
        skin->stream_recording_is_set= 1;
-     else
+     else if(value_pt[0] >= '0' && value_pt[0] <= '9') {
+       num= Scanf_io_size(value_pt, 0);
+       num/= 2048.0;
+       if(num >= 16 && num <= 0x7FFFFFFF)
+         skin->stream_recording_is_set= num;
+       else
+         skin->stream_recording_is_set= 0;
+     } else
        skin->stream_recording_is_set= 0;
-
    } else if(strcmp(argv[i],"-swab")==0) {
      skin->swap_audio_bytes= 0;
 

cdrskin/cdrskin_eng.html

@@ -2,7 +2,7 @@
 
 <HEAD>
 <META NAME="description" CONTENT="cdrskin, a limited cdrecord compatibility wrapper for libburn">
-<META NAME="keywords" CONTENT="cdrskin, libburn, libburnia, burn, CD, DVD, linux, recording, burning, CD-R, CD-RW, DVD-R, DVD-RW, DVD+RW, DVD+R, DVD+R/DL, DVD-RAM, BD-RE, cdrecord, compatible, scdbackup">
+<META NAME="keywords" CONTENT="cdrskin, libburn, libburnia, burn, CD, DVD, linux, recording, burning, CD-R, CD-RW, DVD-R, DVD-RW, DVD+RW, DVD+R, DVD+R/DL, DVD-RAM, BD-RE, BD-R, cdrecord, compatible, scdbackup">
 <META NAME="robots" CONTENT="follow">
 <TITLE>cdrskin homepage english</TITLE>
 </HEAD>
@@ -24,7 +24,7 @@
 <P>
 <H2>Purpose:</H2>
 Burns preformatted data to CD, DVD, and BD media:<BR>
-CD-R, DVD-R, DVD+R, DVD+R/DL, CD-RW, DVD-RW, DVD-RAM, DVD+RW, BD-RE
+CD-R, DVD-R, DVD+R, DVD+R/DL, BD-R, CD-RW, DVD-RW, DVD-RAM, DVD+RW, BD-RE
 </P>
 <P>
 
@@ -59,12 +59,12 @@ and to MMC-5 for DVD or BD).
 GPL software included:<BR>
 </H2>
 <DL>
-<DT>libburn-0.5.8</DT>
+<DT>libburn-0.6.8</DT>
 <DD>(founded by Derek Foreman and Ben Jansens,
 developed and maintained since August 2006 by
 Thomas Schmitt from team of libburnia-project.org)
 </DD>
-<DD>transfers data to CD, DVD, BD-RE</DD>
+<DD>transfers data to CD, DVD, BD</DD>
 </DL>
 </P>
 
@@ -93,7 +93,7 @@ are provided in a compatible way.<BR>
 On all DVD media except DVD-R DL, cdrskin is able to perform any recording job
 which is possible with cdrecord.
 Other than with cdrecord, option -multi is supported with many DVD types and
-write mode -tao works with anything but quickly blanked DVD-RW.
+BD-R. Write mode -tao works with anything but quickly blanked DVD-RW.
 </DT>
 <BR><BR>
 <DT>Get an overview of drives and their addresses</DT>
@@ -148,6 +148,9 @@ as listed by option --devices.</DT>
 <DD><KBD>&nbsp;&nbsp;--tell_media_space 2>/dev/null)</KBD></DD>
 <DD>$<KBD>&nbsp;echo "Available: $x blocks of 2048 data bytes"</KBD></DD>
 
+<DT>Accelerate BD-RE writing to full nominal speed after the first 250 MB</DT>
+<DD>$<KBD>&nbsp;cdrskin ... stream_recording=250m ...</KBD>
+
 <DT>Write audio tracks to CD:</DT>
 <DD>$<KBD>&nbsp;cdrskin -v dev=ATA:1,0,0 speed=48 -sao \</KBD></DD>
 <DD><KBD>&nbsp;&nbsp;track1.wav track2.au -audio -swab track3.raw</KBD></DD>
@@ -174,14 +177,11 @@ man cdrecord</A></KBD></DD>
 <DL>
 <DT>Learn to know a more versatile way to burn ISO 9660 formatted data</DT>
 <DD>
-Standalone ISO 9660 multi-session CD/DVD tool
+Standalone ISO 9660 multi-session CD/DVD/BD tool
 <A HREF="http://scdbackup.sourceforge.net/xorriso_eng.html">xorriso</A>.
 </DD>
 </DL>
 
-Testers wanted who are willing to risk some DVD-R DL media
-or to do experiments on BD-R media.
-
 </P>
 
 <HR>
@@ -191,8 +191,8 @@ or to do experiments on BD-R media.
 <P>
 <DL>
 <DT>Download as source code (see README):</DT>
-<DD><A HREF="cdrskin-0.5.8.pl00.tar.gz">cdrskin-0.5.8.pl00.tar.gz</A>
-(740 KB).
+<DD><A HREF="cdrskin-0.6.8.pl00.tar.gz">cdrskin-0.6.8.pl00.tar.gz</A>
+(750 KB).
 </DD>
 <DD>
 The cdrskin tarballs are source code identical with libburn releases
@@ -241,45 +241,49 @@ cdrskin_0.4.2.pl00-x86-suse9_0-static.tar.gz</A>, (310 KB), -static compiled,
 <HR>
 
 <P>
-Enhancements towards previous stable version cdrskin-0.5.6.pl00:
+Enhancements towards previous stable version cdrskin-0.6.6.pl00:
 <UL>
-<LI>Improvements about BD-RE formatting</LI>
+<LI>Made -scanbus work with high SCSI bus numbers</LI>
 <!--
 <LI>none</LI>
 -->
 </UL>
 
-Bug fixes towards cdrskin-0.5.6.pl00:
+Bug fixes towards cdrskin-0.6.6.pl00:
 <UL>
-<LI>
-A session without leadout entry on CD caused a SIGSEGV by NULL
-</LI>
+<LI>Old MMC-1 drives were rejected</LI>
 <!--
 <LI>none</LI>
 -->
 </UL>
 
-</P>
-
 <HR>
 
 <P>
 <DL>
-<DT><H3>Development snapshot, version 0.5.9 :</H3></DT>
-<DD>Enhancements towards current stable version 0.5.8.pl00:
+<DT><H3>Development snapshot, version 0.6.9 :</H3></DT>
+<DD>Enhancements towards current stable version 0.6.8.pl00:
 <UL>
-<!--
 <LI>none yet</LI>
+<!--
 -->
-<LI>Formatting and writing of BD-R media</LI>
 
 </UL>
 </DD>
+
+<DD>Bug fixes towards cdrskin-0.6.8.pl00:
+<UL>
+<LI>none yet</LI>
+<!--
+-->
+</UL>
+</DD>
+
 <DD>&nbsp;</DD>
-<DD><A HREF="README_cdrskin_devel">README 0.5.9</A>
-<DD><A HREF="cdrskin__help_devel">cdrskin_0.5.9 --help</A></DD>
-<DD><A HREF="cdrskin_help_devel">cdrskin_0.5.9 -help</A></DD>
-<DD><A HREF="man_1_cdrskin_devel.html">man cdrskin (as of 0.5.9)</A></DD>
+<DD><A HREF="README_cdrskin_devel">README 0.6.9</A>
+<DD><A HREF="cdrskin__help_devel">cdrskin_0.6.9 --help</A></DD>
+<DD><A HREF="cdrskin_help_devel">cdrskin_0.6.9 -help</A></DD>
+<DD><A HREF="man_1_cdrskin_devel.html">man cdrskin (as of 0.6.9)</A></DD>
 <DD>&nbsp;</DD>
 <DT>Maintainers of cdrskin unstable packages please use SVN of
 <A HREF="http://libburnia-project.org"> libburnia-project.org</A></DT>
@@ -299,8 +303,8 @@ admins with full system souvereignty.</DT>
 <A HREF="README_cdrskin_devel">upcoming README</A> ):
 </DD>
 <DD>
-<A HREF="cdrskin-0.5.9.tar.gz">cdrskin-0.5.9.tar.gz</A>
-(740 KB).
+<A HREF="cdrskin-0.6.9.tar.gz">cdrskin-0.6.9.tar.gz</A>
+(750 KB).
 </DD>
 
 <!-- This is not offered any more since spring 2008
@@ -333,7 +337,7 @@ Historic versions based on Derek's and Ben's
 <BR>
 Very special thanks to Andy Polyakov whose 
 <A HREF="http://fy.chalmers.se/~appro/linux/DVD+RW/tools">dvd+rw-tools</A>
-provide libburn with invaluable examples on how to deal with DVD media.
+provide libburn with invaluable examples on how to deal with DVD and BD media.
 </P>
 
 <HR>
@@ -495,12 +499,17 @@ and by <A HREF="http://sourceforge.net">sourceforge.net</A><BR>
 <A href="http://sourceforge.net">
 <IMG src="sflogo-88-1.png" BORDER="0" ALT="SourceForge Logo"></A>
 <!-- on sourceforge use : <IMG src="http://sourceforge.net/sflogo.php?group_id=16010" width="88" height="31" border="0" alt="SourceForge Logo"></A> -->
+<P>
+Enjoying a FreeBSD shell account with the opportunity to
+build and install cdrskin at<BR>
+<A HREF="http://www.en.free-shells.com.ar">free-shells.com.ar</A>
+</P>
 </FONT></CENTER>
 <HR>
 <DL>
 <DT>Links to my other published software projects :
 <DD><A HREF="http://scdbackup.webframe.org/xorriso_eng.html">
-xorriso, a standalone ISO 9660 multi-session CD/DVD burn tool.
+xorriso, a standalone ISO 9660 multi-session CD/DVD/BD burn tool.
 No mkisofs needed.
 <DL>
 <DD>

cdrskin/cdrskin_timestamp.h

@@ -1 +1 @@
-#define Cdrskin_timestamP "2008.12.29.105341"
+#define Cdrskin_timestamP "2009.07.14.100001"

cdrskin/changelog.txt

@@ -6091,17 +6091,647 @@ Dec 07 2008  [2253]
 + cdrskin/add_ts_changes_to_libburn_0_5_9
 Updated cdrskin tarball generator
 
-Dec 07 2008  []
+Dec 07 2008  [2254]
 cdrskin/changelog.txt
 Documented changes and release timestamp
 
+Dec 07 2008  [2255]
+svn move -m "libburn release 0.5.8 is ready" \
+     http://svn.libburnia-project.org/libburn/branches/ZeroFiveEigh \
+     http://svn.libburnia-project.org/libburn/tags/ZeroFiveEight
+
+svn delete -m 'Deleted obsolete branch' \
+    http://svn.libburnia-project.org/libburn/branches/"$svn_name"
+
+
 ------------------------------------ cycle  - cdrskin-0.5.9 - 2008.12.07.155219
 
+2008.12.09.123314  [2264]
+libburn/libburn.h
+libburn/drive.c
+libburn/async.c
+libburn/write.c
+libburn/mmc.c
+Beginning to implement write code for BD-R SRM without POW
+
+2008.12.09.123558  [2265]
+cdrskin/cdrskin.c
+Beginning to implement write code for BD-R SRM without POW
+
+2008.12.10.092535  [2271]
+libburn/transport.h
+libburn/async.c
+libburn/mmc.h
+libburn/mmc.c
+Formatting of BD-R SRM to default size and by index
+
+2008.12.10.114241  [2273]
+cdrskin/cdrskin.c
+Formatting of BD-R SRM to default size and by index
+
+10 Dec 2008  [2274]
+README
+cdrskin/README
+cdrskin/cdrskin.1
+cdrskin/wiki_plain.txt
+Mentioning BD-R in documentation
+
+2008.12.11.072308  [2276]
+libburn/libdax_msgs.h
+libburn/async.c
+Rejecting unformattable BD-R more early
+
+2008.12.11.092204  [2278]
+libburn/libdax_msgs.h
+libburn/async.c
+libburn/mmc.c
+cdrskin/cdrskin.1
+Catching BD-R zero spare formatting with NOTE rather than SORRY
+
+2008.12.12.112129  [2279]
+libburn/libburn.h
+libburn/async.c
+libburn/mmc.c
+Making format size of BD-RE and BD-R quite freely adjustable
+
+2008.12.12.214013  [2280]
+libburn/transport.h
+libburn/async.c
+libburn/mmc.c
+Interpreting feature 0023h for BD formatting capabilities
+
+2008.12.13.144909  [2284]
+configure.ac
+Now producing libburn.so.4.24.0
+
+------------------------------------ cycle  - cdrskin-0.5.9 - 2008.12.13.144909
+* Formatting and writing of BD-R media
 
 
------------------------------------- cycle  - cdrskin-0.5.9 - 
------------------------------------- cycle  - cdrskin-0.5.9 - 
+14 Dec 2008  [2289]
+test/libburner.c
+Updated libburner to BD-R
 
+14 Dec 2008 [2290]
+cdrskin/cdrskin_eng.html
+Updated cdrskin web page
+
+2008.12.17.091905  [2297]
+libburn/libburn.h
+libburn/drive.c
+New API function burn_get_read_capacity()
+
+17 Dec 2008 [2298] [2302]
+doc/comments
+Removed project overview and references to libisofs and libisoburn
+
+------------------------------------ cycle  - cdrskin-0.5.9 - 2008.12.19.070912
+* New API function burn_get_read_capacity()
+
+
+2008.12.19.203523  [2306]
+libburn/libburn.h
+Clarified blank, appendable, closed burn_disc_status 
+
+2008.12.22.130527  [2323]
+libburn/async.c
+Fixed denial of fast formatting with BD-RE introduced by revision 2280
+
+------------------------------------ cycle  - cdrskin-0.5.9 - 2008.12.23.144853
+
+
+2008.12.29.105341  [2342]
+libburn/libburn.h
+test/libburner.c
+Cosmetic changes
+
+Jan 02 2009  [2346]
+svn copy http://svn.libburnia-project.org/libburn/trunk
+         http://svn.libburnia-project.org/libburn/branches/ZeroSixZero
+Preparing for libburn-0.6.0
+
+02 Jan 2009  [2347]
+COPYRIGHT
+libburn/libdax_msgs.c
+libburn/libdax_msgs.h
+test/libburner.c
+Updated copyright claims to year 2009
+
+2009.01.02.160001  [2348]
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+Made number transition to 0.6.0
+
+02 Jan 2009  [2349]
+- cdrskin/add_ts_changes_to_libburn_0_5_8
+- cdrskin/add_ts_changes_to_libburn_0_5_9
++ cdrskin/add_ts_changes_to_libburn_0_6_0
++ cdrskin/add_ts_changes_to_libburn_0_6_1
+Updated cdrskin tarball generator
+
+02 Jan 2009  [2350]
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+------------------------------ release - cdrskin-0.6.0.pl00 - 2009.01.02.160001
+* Formatting and writing of BD-R media
+* New API function burn_get_read_capacity()
+
+2009.01.04.112716  [2351]
+COPYRIGHT
+libburn/libdax_msgs.c
+libburn/libdax_msgs.h
+test/libburner.c
+Updated copyright claims to year 2009
+
+2009.01.04.113401  [2352]
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+Made number transition to 0.6.1
+
+04 Jan 2009  [2353]
+- cdrskin/add_ts_changes_to_libburn_0_5_8
+- cdrskin/add_ts_changes_to_libburn_0_5_9
++ cdrskin/add_ts_changes_to_libburn_0_6_0
++ cdrskin/add_ts_changes_to_libburn_0_6_1
+Updated cdrskin tarball generator
+
+03 Jan 2009  [2354]
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+------------------------------------ cycle  - cdrskin-0.6.1 - 2009.01.04.113401
+
+04 Jan 2009  [2356]
+svn move
+http://svn.libburnia-project.org/libburn/branches/ZeroSixZero
+http://svn.libburnia-project.org/libburn/tags/ZeroSixZero
+libburn release 0.6.0 is ready 
+
+2009.01.06.122534  [2366]
+libburn/spc.c
+Error texts for ASC 73 : power calibration and program memory
+
+2009.01.06.122808  [2367] [2369]
+libburn/async.c
+libburn/libdax_msgs.h
+Complaining and refusing more early with unformatted BD-RE
+
+7 Jan 2009  [2370]
+cdrskin/cdrskin.1
+Clarification about one-time DVD and BD media
+
+2009.01.07.154414  [2371]
+libburn/write.c
+Bug fix: BD-R were not correctly finalized
+
+7 Jan 2009  [2372]
+cdrskin/cdrskin_eng.html
+Mentioned bug fix and pl01
+
+------------------------------------ cycle  - cdrskin-0.6.1 - 2009.01.07.154414
+
+7 Jan 2009  [2373]
+svn copy -m "Branching for libburn bugfix release 0.6.0.pl01" \
+    http://svn.libburnia-project.org/libburn/ \
+    http://svn.libburnia-project.org/libburn/
+
+7 Jan 2009  [2374]
+svn rm -m 'Removing falsly copied tag' \
+    http://svn.libburnia-project.org/libburn/libburn
+
+7 Jan 2009  [2375]
+svn copy -m "Branching for libburn bugfix release 0.6.0.pl01" \
+    http://svn.libburnia-project.org/libburn/tags/ZeroSixZero \
+    http://svn.libburnia-project.org/libburn/branches/ZeroSixZeroPl01
+
+2009.01.07.140001  [branch 2376]
+README 
+cdrskin/README 
+cdrskin/cdrskin_eng.html
+cdrskin/cdrskin_timestamp.h
+Mentioned bug fix and pl01
+
+2009.01.07.140001  [branch 2377]
+libburn/write.c
+Bug fix: BD-R were not correctly finalized
+
+7 Jan 2009  [2378]
+svn move -m 'libburn bugfix release 0.6.0.pl01 is ready' \
+    http://svn.libburnia-project.org/libburn/branches/ZeroSixZeroPl01 \
+    http://svn.libburnia-project.org/libburn/tags/ZeroSixZeroPl01
+
+------------------------------------ cycle  - cdrskin-0.6.1 - 2009.01.07.154414
+
+2009.01.09.095943  [2381]
+libburn/transport.h
+libburn/write.c
+libburn/mmc.c
+libburn/libdax_msgs.h
+Recognizing BD-R media spoiled by the close bug and handling them as appendable
+
+------------------------------------ cycle  - cdrskin-0.6.1 - 2009.01.09.100210
+
+2009.01.09.161704  [2383]
+libburn/write.c
+Preventing a possible bug with a burn run of more than one session at once
+
+2009.01.11.102711  [2390]
+libburn/write.c
+libburn/libdax_msgs.h
+Prepared eventual closing of spoiled BD-R media by a pseudo write run
+
+11 Jan 2009  [2391]
+doc/cookbook.txt
+Updated cookbook about BD-R media
+
+27 Jan 2009  [2431]
+README
+libburn/libburn.h
+Mentioned the need for 64 bit file i/o
+
+2009.02.04.102822  [2447]
+Makefile.am
+Linking with $LIBBURN_ARCH_LIBS to get -lcam on FreeBSD
+
+4 Feb 2009  [2448]
+README
+cdrskin/README
+Mentioned hald as possibly conflicting service
+
+2009.02.19.192801  [2479]
+libburn/spc.c
+Human readable error messages with asynchronous SCSI errors
+
+20 Feb 2009  [2482]
+svn copy http://svn.libburnia-project.org/libburn/trunk
+         http://svn.libburnia-project.org/libburn/branches/ZeroSixZero
+Preparing for libburn-0.6.0
+
+2009.02.20.090001  [2483]
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c 
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+Made number transition to 0.6.2
+
+20 Feb 2009  [2484]
+- cdrskin/add_ts_changes_to_libburn_0_6_0
+- cdrskin/add_ts_changes_to_libburn_0_6_1
++ cdrskin/add_ts_changes_to_libburn_0_6_2
++ cdrskin/add_ts_changes_to_libburn_0_6_3
+Updated cdrskin tarball generator
+
+------------------------------ release - cdrskin-0.6.2.pl00 - 2009.02.20.090001
+* Improvements with build system for FreeBSD
+
+2009.02.20.124909  [2485]
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c 
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+Made number transition to 0.6.3
+
+20 Feb 2009  [2486]
+- cdrskin/add_ts_changes_to_libburn_0_6_0
+- cdrskin/add_ts_changes_to_libburn_0_6_1
++ cdrskin/add_ts_changes_to_libburn_0_6_2
++ cdrskin/add_ts_changes_to_libburn_0_6_3
+Updated cdrskin tarball generator
+
+------------------------------------ cycle  - cdrskin-0.6.3 - 2009.02.20.132535
+
+20 Feb 2009  [2489]
+svn move -m libburn release 0.6.2 is ready
+   http://svn.libburnia-project.org/libburn/branches/ZeroSixTwo
+   http://svn.libburnia-project.org/libburn/tags/ZeroSixTwo
+
+2009.02.27.143100  [2500]
+libburn/libburn.h
+libburn/transport.h
+libburn/drive.c
+libburn/options.c
+libburn/write.c
+libburn/mmc.c
+New API function burn_drive_set_stream_recording()
+
+2009.02.27.211707  [2501]
+cdrskin/cdrskin.c
+cdrskin/cdrskin.1
+New stream_recording mode with start number
+
+2009.03.02.170126  [2513]
+libburn/os.h
+libburn/libdax_msgs.h
+libburn/sg.c
++ libburn/os-dummy.h
++ libburn/sg-dummy.c
+New operating system adapter "dummy" for stdio on POSIX-like systems
+
+2009.03.02.193353  [2514]
+libburn/drive.c
+Fixed a race condition on abort with stdio writing which could cause SIGSEGV
+
+2009.03.02.200132  [2515]
+libburn/sg.c
+Added a dummy function with loud compiler warning to sg.c dummy case
+
+2009.03.03.092057  [2516]
+configure.ac
+libburn/sg-dummy.c
+Making optional use of statvfs() in sg-dummy
+
+------------------------------------ cycle  - cdrskin-0.6.3 - 2009.03.03.092057
+* New API function burn_drive_set_stream_recording()
+* New stream recording mode with start number
+
+
+2009.03.05.145309  [2520]
+acinclude.m4
+Lifted the ban on operating systems other than Linux and FreeBSD
+
+------------------------------------ cycle  - cdrskin-0.6.3 - 2009.03.05.145309
+* New operating system adapter "dummy" for stdio on POSIX-like systems
+
+
+2009.03.08.140120  [2522]
+libburn/cleanup.c
+Reacted on compiler warnings of SchilliX-0.6.7 (based on Solaris 5.11)
+
+13 Mar 2009  [2529]
+svn copy -m "Branching for libburn release 0.6.4" \
+    http://svn.libburnia-project.org/libburn/trunk \
+    http://svn.libburnia-project.org/libburn/branches/ZeroSixFour
+
+2009.03.13.080001  [2530]
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c 
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+Made libburn number transition to 0.6.4
+
+13 Mar 2009  [2531]
+- cdrskin/add_ts_changes_to_libburn_0_6_2
+- cdrskin/add_ts_changes_to_libburn_0_6_3
++ cdrskin/add_ts_changes_to_libburn_0_6_4
++ cdrskin/add_ts_changes_to_libburn_0_6_5
+Updated cdrskin tarball generator
+
+13 Mar 2009  [2534]
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+------------------------------ release - cdrskin-0.6.4.pl00 - 2009.03.13.080001
+* New operating system adapter "dummy" for stdio on general X/Open systems
+* New API function burn_drive_set_stream_recording()
+* New stream recording mode with start address
+
+
+2009.03.13.135818  [2532]
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+Made libburn number transition to 0.6.5
+
+13 Mar 2009  [2533]
+- cdrskin/add_ts_changes_to_libburn_0_6_2
+- cdrskin/add_ts_changes_to_libburn_0_6_3
++ cdrskin/add_ts_changes_to_libburn_0_6_4
++ cdrskin/add_ts_changes_to_libburn_0_6_5
+Updated cdrskin tarball generator
+
+13 Mar 2009  [2535]
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+------------------------------------ cycle  - cdrskin-0.6.5 - 2009.03.13.162355
+
+13 Mar 2009  [2538]
+svn move -m "libburn release 0.6.4 is ready" \
+    http://svn.libburnia-project.org/libburn/branches/ZeroSixFour \
+    http://svn.libburnia-project.org/libburn/tags/ZeroSixFour
+
+2009.03.16.190745  [2547]
+configure.ac
+acinclude.m4
+Makefile.am
+Get on FreeBSD pkgconfigdir=.../libdata , on Linux and others: .../lib
+
+2009.03.18.124558  [2553]
+libburn/spc.c
+Human readable error messages for asc=08 "Logical unit communication failure"
+
+2009.03.18.172512  [2554]
+libburn/drive.c
+Bug fix: burn_abort() did not work with broken output pipe (since rev 2514)
+
+2009.04.30.065653  [2623]
+libburn/write.c
+Marked alleged use of uninitialized memory reported by valgrind
+
+2009.04.30.065918  [2624]
+libburn/write.c
+Replaced 8 blanks by a tab
+
+2009.04.30.070813 [2625]
+libburn/sg-freebsd.c
+Bug fix: Device scan stalled on FreeBSD. Ticket 148 jwehle
+
+------------------------------------ cycle  - cdrskin-0.6.5 - 2009.04.30.070813
+Bug fix: burn_abort() did not work with broken output pipe (since rev 2514)
+Bug fix: Device scan stalled on FreeBSD. Ticket 148 jwehle
+
+7 May 2009 [2628]
+svn copy -m "Branching for libburn release 0.6.6"
+      http://svn.libburnia-project.org/libburn/trunk
+      http://svn.libburnia-project.org/libburn/branches/ZeroSixSix
+
+7 May 2009  [2629]
+cdrskin/cdrskin.1
+Mentioned BD were it was missing
+
+2009.05.07.100001  [2630]
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+Made number transition and activated development documentation
+
+7 May 2009  [2631]
+- cdrskin/add_ts_changes_to_libburn_0_6_4
+- cdrskin/add_ts_changes_to_libburn_0_6_5
++ cdrskin/add_ts_changes_to_libburn_0_6_6
++ cdrskin/add_ts_changes_to_libburn_0_6_7
+Updated cdrskin tarball generator
+
+7 May 2009  [2632]
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+------------------------------ release - cdrskin-0.6.6.pl00 - 2009.05.07.100001
+Bug fix: burn_abort() did not work with broken output pipe (since rev 2514)
+Bug fix: Device scan stalled on FreeBSD. Ticket 148 jwehle
+
+
+7 May 2009  [2633]
+cdrskin/cdrskin.1
+Mentioned BD were it was missing
+
+2009.05.07.181034  [2634]
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+Made number transition and activated development documentation
+
+7 May 2009  [2635]
+- cdrskin/add_ts_changes_to_libburn_0_6_4
+- cdrskin/add_ts_changes_to_libburn_0_6_5
++ cdrskin/add_ts_changes_to_libburn_0_6_6
++ cdrskin/add_ts_changes_to_libburn_0_6_7
+Updated cdrskin tarball generator
+
+7 May 2009  [2636]
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+------------------------------------ cycle  - cdrskin-0.6.7 - 2009.05.07.181034
+
+8 May 2009  [2637]
+svn move -m libburn release 0.6.6 is ready
+http://svn.libburnia-project.org/libburn/branches/ZeroSixSix
+http://svn.libburnia-project.org/libburn/tags/ZeroSixSix
+
+2009.05.17.144304  [2645]
+cdrskin/cdrskin.c
+Made -scanbus work with SCSI bus numbers like 85 (USB, kernel 2.6.18.2)
+
+2009.06.02.162841  [2655]
+libburn/drive.c
+libburn/async.c
+libburn/options.c
+libburn/spc.c
+libburn/libdax_msgs.h
+Rectified use of burn_drive.mdata->valid
+
+2 Jun 2009  [2656]
+test/libburner.c
+Avoided SIGSEGV if no drives were found by scan
+
+2009.06.02.172201  [2657]
+libburn/drive.c
+Avoided to enumerate faulty drive objects
+
+2009.06.03.085637 [2658]
+libburn/spc.c
+Bug fix: Old MMC-1 drives were rejected because of mode page 2Ah length
+
+2009.06.03.185118  [2659]
+libburn/transport.h
+libburn/drive.c
+libburn/spc.c
+libburn/mmc.c
+Bug fix: No usable media was detected with old MMC-1 drives
+
+2009.06.14.095004  [2669]
+libburn/sg-linux.c
+Retrying 3 times on EBUSY drives with generous usleep intervals
+
+------------------------------------ cycle  - cdrskin-0.6.7 - 2009.06.14.095833
+Made -scanbus work with high SCSI bus numbers
+Bug fix: Old MMC-1 drives were rejected because of mode page 2Ah length
+Bug fix: No usable media was detected with old MMC-1 drives
+
+
+7 Jul 2009  [2691]
+acinclude.m4
+configure.ac
+configure options --enable-libdir-pkgconfig and --enable-pkgconfig-path=DIR
+
+2009.07.07.191134  [2692]
+Timestamp for revision 2691
+
+14 Jul 2009 [2894]
+svn copy -m "Branching for libburn release 0.6.8"
+      http://svn.libburnia-project.org/libburn/trunk
+      http://svn.libburnia-project.org/libburn/branches/ZeroSixEight
+
+2009.07.14.100001  [2695]
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+Made number transition and activated development documentation
+
+14 Jul 2009  [2696]
+- cdrskin/add_ts_changes_to_libburn_0_6_6
+- cdrskin/add_ts_changes_to_libburn_0_6_7
++ cdrskin/add_ts_changes_to_libburn_0_6_8
++ cdrskin/add_ts_changes_to_libburn_0_6_9
+Updated cdrskin tarball generator
+
+14 Jul 2009  []
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+------------------------------ release - cdrskin-0.6.8.pl00 - 2009.07.14.100001
+Made -scanbus work with high SCSI bus numbers
+Bug fix: Old MMC-1 drives were rejected because of mode page 2Ah length
+Bug fix: No usable media was detected with old MMC-1 drives
+
+
+------------------------------------ cycle  - cdrskin-0.6.9 - 
+------------------------------------ cycle  - cdrskin-0.6.9 - 
 
 ===============================================================================
                                     TODO
@@ -6110,7 +6740,6 @@ Documented changes and release timestamp
 
 --------------------------------- bugs -------------------------------------
 
-- Needed is a system dependend facility: dev_t <-> major, minor
 
 - Do something about drive->buffer asynchronous race conditions
   and dangerous use of local heap memory.
@@ -6132,13 +6761,11 @@ READ TRACK INFORMATION[#5]:
 
 ------------------------------ end of bugs ---------------------------------
 
+Support for BD-R SRM+POW
+
 ? Provide an option to open track source file O_DIRECT ?
   (needs read chunks much larger than 2 kB)
 
-interpret feature 0023h byte 4 for BD-RE formatting capabilities
-
-Enable profile 0x41 BD-R sequential recording (much like DVD+R)
-
 ? Enable profile 0x42 BD-R random recording
 
 Provide DVD+R DL layer break setter
@@ -6150,9 +6777,6 @@ problem with telltoc: double descriptor list from before load and after load
 
 What about cdrskin rc files ? Forward with fallback runs ?
 
-cdrskin/README
-Thin out
-
 
   []
 Emulate -dummy on overwriteables ?

cdrskin/compile_cdrskin.sh

@@ -1,13 +1,13 @@
 #!/bin/sh
 
 # compile_cdrskin.sh  
-# Copyright 2005 - 2008 Thomas Schmitt, scdbackup@gmx.net, GPL version 2
+# Copyright 2005 - 2009 Thomas Schmitt, scdbackup@gmx.net, GPL version 2
 # to be executed within  ./libburn-*  resp ./cdrskin-*
 
 debug_opts="-O2"
 def_opts=
 largefile_opts="-D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE=1"
-libvers="-DCdrskin_libburn_0_5_9"
+libvers="-DCdrskin_libburn_0_6_8"
 cleanup_src_or_obj="libburn/cleanup.o"
 libdax_msgs_o="libburn/libdax_msgs.o"
 libdax_audioxtr_o="libburn/libdax_audioxtr.o"
@@ -33,15 +33,15 @@ do
     libdax_audioxtr_o=
     libdax_msgs_o="libburn/message.o"
     cleanup_src_or_obj="-DCleanup_has_no_libburn_os_H cdrskin/cleanup.c"
-  elif test "$i" = "-libburn_0_5_8"
+  elif test "$i" = "-libburn_0_6_8"
   then
-    libvers="-DCdrskin_libburn_0_5_8"
+    libvers="-DCdrskin_libburn_0_6_8"
     libdax_audioxtr_o="libburn/libdax_audioxtr.o"
     libdax_msgs_o="libburn/libdax_msgs.o"
     cleanup_src_or_obj="libburn/cleanup.o"
   elif test "$i" = "-libburn_svn"
   then
-    libvers="-DCdrskin_libburn_0_5_9"
+    libvers="-DCdrskin_libburn_0_6_9"
     libdax_audioxtr_o="libburn/libdax_audioxtr.o"
     libdax_msgs_o="libburn/libdax_msgs.o"
     cleanup_src_or_obj="libburn/cleanup.o"
@@ -75,10 +75,8 @@ do
     echo "Options:"
     echo "  -compile_cdrfifo  compile program cdrskin/cdrfifo."
     echo "  -compile_dewav    compile program test/dewav without libburn."
-    echo "  -cvs_A60220       set macro to match libburn-CVS of 20 Feb 2006."
-    echo "  -libburn_0_5_8    set macro to match libburn-0.5.8"
+    echo "  -libburn_0_6_8    set macro to match libburn-0.6.8"
     echo "  -libburn_svn      set macro to match current libburn-SVN."
-    echo "  -no_largefile     do not use 64 bit off_t (must match libburn)."
     echo "  -do_not_compile_cdrskin  omit compilation of cdrskin/cdrskin."
     echo "  -experimental     use newly introduced libburn features."
     echo "  -oldfashioned     use pre-0.2.2 libburn features only."

configure.ac

@@ -1,4 +1,4 @@
-AC_INIT([libburn], [0.5.9], [http://libburnia-project.org])
+AC_INIT([libburn], [0.6.8], [http://libburnia-project.org])
 AC_PREREQ([2.50])
 dnl AC_CONFIG_HEADER([config.h])	
 
@@ -7,7 +7,7 @@ AC_CANONICAL_TARGET
 
 AM_INIT_AUTOMAKE([subdir-objects])
 
-dnl Notes by ts A71207 - A81111 :
+dnl Notes by ts A71207 - A90714 :
 dnl
 dnl Regrettably the meaning of the various version types was misunderstood
 dnl before version 0.4.1.
@@ -42,7 +42,8 @@ dnl    So this is a superspace of the SONAME version space. To avoid
 dnl    ill SONAME, the value of  CURRENT must be larger than AGE.
 dnl    See also http://www.gnu.org/software/libtool/manual.html#Interfaces
 dnl
-dnl The name of the dynamic library will be libburn.so.$SONAME.$AGE.$REV .
+dnl On Linux the name of the dynamic library will be
+dnl    libburn.so.$SONAME.$AGE.$REV
 dnl In the terminology of this file:
 dnl    CURRENT = LT_CURRENT
 dnl    AGE     = LT_AGE
@@ -67,6 +68,11 @@ dnl    0.5.2 = libburn.so.4.17.0
 dnl    0.5.4 = libburn.so.4.19.0
 dnl    0.5.6 = libburn.so.4.21.0
 dnl    0.5.8 = libburn.so.4.23.0
+dnl    0.6.0 = libburn.so.4.25.0
+dnl    0.6.2 = libburn.so.4.27.0
+dnl    0.6.4 = libburn.so.4.29.0
+dnl    0.6.6 = libburn.so.4.31.0
+dnl    0.6.8 = libburn.so.4.33.0
 dnl
 dnl So LT_CURRENT, LT_REVISION and LT_AGE get set directly here.
 dnl SONAME of the emerging library is  LT_CURRENT - LT_AGE.
@@ -91,8 +97,8 @@ dnl If BURN_*_VERSION changes, be sure to change AC_INIT above to match.
 dnl
 dnl As said: Only copies. Original in libburn/libburn.h : burn_header_version_*
 BURN_MAJOR_VERSION=0
-BURN_MINOR_VERSION=5
-BURN_MICRO_VERSION=9
+BURN_MINOR_VERSION=6
+BURN_MICRO_VERSION=8
 BURN_VERSION=$BURN_MAJOR_VERSION.$BURN_MINOR_VERSION.$BURN_MICRO_VERSION
 
 AC_SUBST(BURN_MAJOR_VERSION)
@@ -103,15 +109,15 @@ AC_SUBST(BURN_VERSION)
 dnl Libtool versioning
 LT_RELEASE=$BURN_MAJOR_VERSION.$BURN_MINOR_VERSION.$BURN_MICRO_VERSION
 dnl
-dnl ts A81207
-dnl ### This is the release version libburn-0.5.8 = libburn.so.4.23.0
-dnl This is the development version after above release version
-dnl ### LT_CURRENT++, LT_AGE++ has not yet happened.
-dnl LT_CURRENT++, LT_AGE++ has happened meanwhile.
+dnl ts A90714
+dnl This is the release version libburn-0.6.8 = libburn.so.4.33.0
+dnl ### This is the development version after above release version
+dnl LT_CURRENT++, LT_AGE++ has not yet happened.
+dnl ### LT_CURRENT++, LT_AGE++ has happened meanwhile.
 dnl
-dnl SONAME = 28 - 24 = 4 . Library name = libburn.so.4.24.0
-LT_CURRENT=28
-LT_AGE=24
+dnl SONAME = 37 - 33 = 4 . Linux library name = libburn.so.4.33.0
+LT_CURRENT=37
+LT_AGE=33
 LT_REVISION=0
 LT_CURRENT_MINUS_AGE=`expr $LT_CURRENT - $LT_AGE`
 
@@ -158,8 +164,19 @@ AC_SUBST(THREAD_LIBS)
 
 TARGET_SHIZZLE
 AC_SUBST(ARCH)
+AC_SUBST(LIBBURNIA_PKGCONFDIR)
 AC_SUBST(LIBBURN_ARCH_LIBS)
 
+dnl ts A90303
+dnl Check the preconditions for using statvfs() in sg-dummy
+dnl (sg-linux and sg-freebsd use statvfs() unconditionally)
+STATVFS_DEF=-DLibburn_os_has_statvfS
+AC_CHECK_HEADER(sys/statvfs.h, X=, STATVFS_DEF=)
+AC_CHECK_FUNC([statvfs], X=, STATVFS_DEF=)
+dnl If this would be done more specifically in Makefile.am
+dnl via libburn_libburn_la_CFLAGS then undesired .o file names would emerge
+CFLAGS="$CFLAGS $STATVFS_DEF"
+
 dnl Add compiler-specific flags
 
 dnl See if the user wants aggressive optimizations of the code
@@ -179,6 +196,13 @@ else
     CFLAGS="$CFLAGS -DDEBUG"
 fi
 
+
+dnl Determine target directory for libburn-*.pc
+dnl Important: Must be performed _after_ TARGET_SHIZZLE
+dnl
+LIBBURNIA_SET_PKGCONFIG
+
+
 AC_CONFIG_FILES([
 	Makefile
 	doc/doxygen.conf

doc/cookbook.txt

@@ -1,4 +1,4 @@
-libburnia-project.org Optical Media Rotisserie Recipes as of April 2008
+libburnia-project.org Optical Media Rotisserie Recipes as of January 2009
 
 Content:
 - TAO Multi-Session CD Cookbook (CD-R, CD-RW)
@@ -6,6 +6,7 @@ Content:
 - Overwriteable DVD Cookbook (DVD-RAM, DVD+RW, DVD-RW, BD-RE)
 - Sequential DVD-R[W] Cookbook
 - DVD+R[/DL] Cookbook
+- BD-R Cookbook
 
 -------------------------------------------------------------------------------
                          TAO Multi-Session CD Cookbook
@@ -404,7 +405,7 @@ correctness of Pre-gap and Post-gap would become evident.
 Inspired by Andy Polyakov's http://fy.chalmers.se/~appro/linux/DVD+RW/tools ,
 backed by reading mmc5r03c.pdf from http://www.t10.org/ftp/t10/drafts/mmc5/
 by own experiments with drives NEC ND-4570A, LG GSA-4082B, PHILIPS SPD3300L,
-and by BD-RE experiments done by Giulio Orsero on LG BE06LU10.
+LG GGW H20L, and by BD-RE experiments done by Giulio Orsero on LG BE06LU10.
 
 For libburnia-project.org by Thomas Schmitt <scdbackup@gmx.net>
 
@@ -697,9 +698,14 @@ managment. There is no way to increase payload capacity by format 01h.
 (mmc5r03c.pdf 6.5.4.2.2.1)
 
 With BD-RE there are three format types : 00h, 30h and 31h.
-00h offers the default size format.
+00h offers the default size format. This may be the only fast formatting
+mode that is offered by the drive.
+Feature 0023h tells whether format 31h and certain 30h subtypes are available.
+(mmc5r03c.pdf 5.3.13)
 30h offers several sizes with defect management. Usually there are three
-size to choose: #1: default size, #2: maximum spare area, #3: minimal spare.
+sizes given: #1: default size, #2: maximum spare area, #3: minimal spare.
+One may demand any spare size between maximum and minimum. There may be quick
+certification and full certification. See feature 0023h.
 31h offers a single size and disables defect management. This has the side
 effect to speed up writing to nominal speed.
 (mmc5r03c.pdf 6.5.4.2.15, 6.24.3.3, Table 472)
@@ -738,7 +744,7 @@ DVD-RAM and BD-RE tuning :
 
 A special aspect of DVD-RAM and BD-RE is their low speed with write operations,
 which usually is only half than the nominal speed of media and drive.
-This is blamed to the automatic checkreading which happens ifor managing
+This is blamed to the automatic checkreading which happens for managing
 eventual defects. 
 
 Defect management of BD-RE can be disabled by format type 31h. See above.
@@ -749,7 +755,7 @@ The only known way to get full speed from DVD-RAM or BD-RE with enabled defect
 management is the use of AAh WRITE12 with Streaming Bit set to 1.
 (mmc5r03c.pdf 6.45)
 With some DVD-RAM drives this fails if a write buffer is not full 32 kB.
-With the tested BD-RE ione has to write write full 64 kB buffers.
+With the tested BD-RE one has to write full 64 kB buffers.
 
 Although it seems not optimal, this is specified not only to disable the
 cumbersome checkread but also to ignore known defects and to write data
@@ -760,10 +766,10 @@ incorrectable errors.
 
 Caveat:
 MMC-5 does not guarantee AAh WRITE12 to work on DVD-RAM or BD-RE at all.
-None of the features of profiles 0012h and 0043 promises the existence of
+None of the features of profiles 0012h and 0043h promises the existence of
 AAh WRITE12.
-Nevertheless it worked on all tested drives is proper alignment was observed.
 (mmc5r03c.pdf 5.4.13, 6.45)
+Nevertheless it worked on all tested drives if proper alignment was observed.
 
 
 -------------------------------------------------------------------------------
@@ -790,9 +796,9 @@ The bytes 0 to 5 of a PVD block are
    0x01 'C' 'D' '0' '0' '1'
 The sector count can then be read from byte 80 to 83
    sectors= pvd[80] | (pvd[81] << 8) | (pvd[82] << 16) | (pvd[83] << 24);
+(Ecma-119.pdf 8.4)
 To support CD, DVD and BD media alike, it is advisable to round the NWA
 to the next multiple of 32 (= 64 KiB).
-(Ecma-119.pdf 8.4)
 
 So one can use 0 as MSC1 and prepare a new ISO session for the computed NWA.
 After writing the session it is necessary to patch the PVD at LBA 16.
@@ -801,7 +807,7 @@ It is stored in both notations LSB and MSB:
    for(i= 0; i < 4; i++)
      pvd[87 - i]= pvd[80 + i]= (sectors >> (8 * i)) & 0xff;
 
-cdrskin --grow_overwriteable not only patches the sector fields of the
+cdrskin --grow_overwriteable_iso not only patches the sector fields of the
 PVD block but also the blocks up to LBA 31 which begin with
    0xff 'C' 'D' '0' '0' '1'
 libisoburn submits 64 KiB data buffer to libisofs before image generation and
@@ -1273,3 +1279,118 @@ in http://libburnia-project.org/ticket/13 .
 
 -------------------------------------------------------------------------------
 
+-------------------------------------------------------------------------------
+                              BD-R Cookbook
+-------------------------------------------------------------------------------
+Inspired by reading mmc5r03c.pdf from http://www.t10.org/ftp/t10/drafts/mmc5/
+backed by experiments iwith drive LG GGW H20L.
+
+For libburnia-project.org by Thomas Schmitt <scdbackup@gmx.net>
+
+-------------------------------------------------------------------------------
+Media type can be recognized by Current Profile from 46h GET CONFIGURATION.
+(mmc5r03c.pdf 6.6.2.1)
+BD-R                           0042h
+
+There are two basic recording modes defined: Sequential Recording Mode SRM and
+Random Recording Mode RRM. The latter is optional and for now not topic of this
+text.
+(mmc5r03c.pdf 4.5.3.5)
+
+
+- SRM Formatting
+- Writing a session in SRM-POW
+(- Pseudo-OverWrite SRM+POW)
+
+
+-------------------------------------------------------------------------------
+SRM Formatting:
+
+Despite being write-once media BD-R can optionally carry some formatting.
+
+SRM has a disc structure model with tracks and sessions.
+Several tracks may be open at the same time, each having its own NWA.
+(mmc5r03c.pdf 4.5.3.5.2.2)
+This structure is formatted onto blank media automatically as soon as the
+first serious write attempt occurs.
+(mmc5r03c.pdf 4.5.3.5)
+Before such a write attempt, blank media may be explicitely formatted with
+spares, which provide defect management.
+(mmc5r03c.pdf 4.5.3.5.3)
+Tracks get created from other tracks via RESERVE TRACK splitting.
+(mmc5r03c.pdf 4.5.3.5.2.5)
+
+On top of defect management there may be Pseudo-OverWrite SRM+POW, a costly
+way to write several times to the same LBA. See below.
+Fully sequential states are called SRM-POW.
+(mmc5r03c.pdf 4.5.3.5.4)
+
+Explicite formatting is done by 04h FORMAT UNIT. Its data payload consists
+of a Format List Header and a Format Descriptor. It is advisable to set
+the Immed bit and the FOV bit in header byte number 1. The descriptor should
+be a copy of a descriptor from 23h READ FORMAT CAPACITIES but the size may be
+adjusted within a certain range.
+(mmc5r03c.pdf 6.5, 6.5.3.2, 6.5.3.3)
+
+Format type 00h creates SRM layouts with a default number of spares (or
+eventually RRM) chosen by the format sub-type:
+  00b = SRM with support for POW
+  01b = SRM without POW (but with some spares for defect management)
+  10b = (RRM)
+(mmc5r03c.pdf 6.5.4.2.1.6)
+
+Format type 32h uses the same sub-types but allows to allocate non-default
+amounts of spares. Similar to BD-RE format 31h, three format descriptors are
+offered: #1: default size, #2: maximum spare area, #3: minimal spare.
+The size may be chosen within that range.
+
+The sense behind the Type Dependent Parameters is obscure
+to me. Best will be to set ISA_V and TDMA_V to 0.
+(mmc5r03c.pdf 6.5.4.2.1.17)
+
+
+-------------------------------------------------------------------------------
+Writing a session in SRM:
+
+The procedure and constraints for writing BD-R SRM-POW are very similar to
+DVD+R. libburn flatly re-uses its DVD+R code except the Close Function for
+finalizing a disc.
+
+In short:
+If all written sessions are closed, then there is exactly one NWA.
+In the beginning there is an empty session and track. A new track can be
+written either with pre-announced size (by RESERVE TRACK) or open-end by
+simply starting to write to the NWA. When done the track gets closed by
+close function 001b. Then either session or disc gets closed depending on
+the Close Function used:
+- Close Function 010b closes the session and keeps the media appendable
+  (same as with DVD+R)
+- Close Function 110b finalizes the media and makes it read-only.
+  (differs from libburn DVD+R procedure which uses 101b)
+
+-------------------------------------------------------------------------------
+Pseudo-OverWrite POW: (no used yet by libburn)
+
+This enhancement of SRM emulates overwriting of existing data blocks.
+(mmc5r03c.pdf 4.5.3.5.4)
+
+POW establishes a virtual vLBA space on top of the real address space rLBA.
+All read and write commands deal with vLBA. It seems that track NWAs are
+assumed to be identical in vLBA space and in rLBA space.
+It is not clear whether one may write to vLBA blocks which are neither written
+yet nor at one of the track NWAs. Probably not, or else one could make NWAs run
+into vLBAs which are associated with older rLBAs.
+
+Replacing invalidated blocks consumes addresses in rLBA space at the NWA of
+some track. I.e. no spares are consumed by POW. Nevertheless it is costly by
+a special map called Orphanage. It covers rLBA which have been consumed
+by differing vLBAs. It never shrinks and can grow with each write to remapped
+addresses.
+To avoid heavy Orphanage growth it is advised to write mostly to vLBA which
+still coincide with their rLBA. E.g. those addresses which have neither been
+written as rLBA nor as vLBA yet. So one should begin the vLBA of new sessions
+at the NWA of a sufficiently sized track.
+(mmc5r03c.pdf 4.5.3.5.4.2 , 4.5.3.6.9)
+
+-------------------------------------------------------------------------------
+

libburn/async.c

@@ -527,12 +527,15 @@ void burn_disc_write(struct burn_write_opts *opts, struct burn_disc *disc)
 {
 	struct write_opts o;
 	char reasons[BURN_REASONS_LEN+80];
+	struct burn_drive *d;
+
+	d = opts->drive;
 
 	/* ts A61006 */
 	/* a ssert(!SCAN_GOING()); */
 	/* a ssert(!find_worker(opts->drive)); */
 	if ((SCAN_GOING()) || find_worker(opts->drive) != NULL) {
-		libdax_msgs_submit(libdax_messenger, opts->drive->global_index,
+		libdax_msgs_submit(libdax_messenger, d->global_index,
 			0x00020102,
 			LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
 			"A drive operation is still going on (want to write)",
@@ -541,14 +544,14 @@ void burn_disc_write(struct burn_write_opts *opts, struct burn_disc *disc)
 	}
 
 	/* For the next lines any return indicates failure */
-	opts->drive->cancel = 1;
+	d->cancel = 1;
 
 	/* ts A70203 : people have been warned in API specs */
 	if (opts->write_type == BURN_WRITE_NONE)
 		return;
 
-	if (opts->drive->drive_role == 0) {
-		libdax_msgs_submit(libdax_messenger, opts->drive->global_index,
+	if (d->drive_role == 0) {
+		libdax_msgs_submit(libdax_messenger, d->global_index,
 			0x00020146,
 			LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
 			"Drive is a virtual placeholder (null-drive)", 0, 0);
@@ -556,9 +559,9 @@ void burn_disc_write(struct burn_write_opts *opts, struct burn_disc *disc)
 	}
 
 	/* ts A61007 : obsolete Assert in spc_select_write_params() */
-	if (opts->drive->drive_role == 1 && !opts->drive->mdata->valid) {
+	if (d->drive_role == 1 && d->mdata->valid <= 0) {
 		libdax_msgs_submit(libdax_messenger,
-				opts->drive->global_index, 0x00020113,
+				d->global_index, 0x00020113,
 				LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
 				"Drive capabilities not inquired yet", 0, 0);
 		return;
@@ -571,21 +574,33 @@ void burn_disc_write(struct burn_write_opts *opts, struct burn_disc *disc)
 	if (burn_precheck_write(opts, disc, reasons + strlen(reasons), 1)
 	     <= 0) {
 		libdax_msgs_submit(libdax_messenger,
-				opts->drive->global_index, 0x00020139,
+				d->global_index, 0x00020139,
 				LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
 				reasons, 0, 0);
 		return;
 	}
 
-	opts->drive->cancel = 0; /* End of the return = failure area */
+	/* ts A90106 : early catching of unformatted BD-RE */
+	if (d->current_profile == 0x43) 
+		if (d->read_format_capacities(d, 0x00) > 0 &&
+		    d->format_descr_type != BURN_FORMAT_IS_FORMATTED) {
+			libdax_msgs_submit(libdax_messenger,
+				d->global_index, 0x00020168,
+				LIBDAX_MSGS_SEV_FAILURE, LIBDAX_MSGS_PRIO_HIGH,
+				"Media not properly formatted. Cannot write.",
+				0, 0);
+			return;
+		}
 
-	o.drive = opts->drive;
+	d->cancel = 0; /* End of the return = failure area */
+
+	o.drive = d;
 	o.opts = opts;
 	o.disc = disc;
 
 	opts->refcount++;
 
-	add_worker(Burnworker_type_writE, opts->drive,
+	add_worker(Burnworker_type_writE, d,
 			(WorkerFunc) write_disc_worker_func, &o);
 }
 

libburn/cleanup.c

@@ -97,8 +97,8 @@ static int Cleanup_handler_exit(int exit_value, int signum, int flag)
        return(2);
    }
  if(cleanup_exiting) {
-   fprintf(stderr,"cleanup: ABORT : repeat by pid=%d, signum=%d\n",
-           getpid(),signum);
+   fprintf(stderr,"cleanup: ABORT : repeat by pid=%.f, signum=%d\n",
+           (double) getpid(), signum);
    return(0);
  }
  cleanup_exiting= 1;

libburn/drive.c

@@ -62,6 +62,7 @@ int burn_setup_drive(struct burn_drive *d, char *fname)
 	d->stdio_fd = -1;
 	d->status = BURN_DISC_UNREADY;
 	d->do_stream_recording = 0;
+        d->stream_recording_start= 0;
 	return 1;
 }
 
@@ -231,7 +232,7 @@ int burn_drive_inquire_media(struct burn_drive *d)
 	/* ts A61020 : d->status was set to BURN_DISC_BLANK as pure guess */
 
         /* ts A71128 : run read_disc_info() for any recognizeable profile */
-	if (d->current_profile > 0 || 
+	if (d->current_profile > 0 || d->current_is_guessed_profile ||
 	    d->mdata->cdr_write || d->mdata->cdrw_write ||
 	    d->mdata->dvdr_write || d->mdata->dvdram_write) {
 
@@ -417,6 +418,9 @@ int burn_drive_unregister(struct burn_drive *d)
 struct burn_drive *burn_drive_finish_enum(struct burn_drive *d)
 {
 	struct burn_drive *t;
+	char msg[BURN_DRIVE_ADR_LEN + 160];
+	int ret;
+
 	/* ts A60821
    	<<< debug: for tracing calls which might use open drive fds */
 	int mmc_function_spy(struct burn_drive *d, char * text);
@@ -429,13 +433,19 @@ struct burn_drive *burn_drive_finish_enum(struct burn_drive *d)
 	mmc_function_spy(NULL, "enumerate_common : -------- doing grab");
 
 	/* try to get the drive info */
-	if (t->grab(t)) {
+	ret = t->grab(t);
+	if (ret) {
 	        burn_print(2, "getting drive info\n");
 	        t->getcaps(t);
 	        t->unlock(t);
 	        t->released = 1;
 	} else {
-	        burn_print(2, "unable to grab new located drive\n");
+		/* ts A90602 */
+		d->mdata->valid = -1;
+                sprintf(msg, "Unable to grab scanned drive %s", d->devname);
+                libdax_msgs_submit(libdax_messenger, d->global_index,
+                                0x0002016f, LIBDAX_MSGS_SEV_DEBUG,
+                                LIBDAX_MSGS_PRIO_LOW, msg, 0, 0);
 	        burn_drive_unregister(t);
 		t = NULL;
 	}
@@ -792,6 +802,18 @@ enum burn_drive_status burn_drive_get_status(struct burn_drive *d,
 	return d->busy;
 }
 
+int burn_drive_set_stream_recording(struct burn_drive *d, int recmode,
+                                    int start, int flag)
+{
+
+	if (recmode == 1)
+		d->do_stream_recording = 1;
+	else if (recmode == -1)
+		d->do_stream_recording = 0;
+	d->stream_recording_start = start;
+	return(1);
+}
+
 void burn_drive_cancel(struct burn_drive *d)
 {
 	pthread_mutex_lock(&d->access_lock);
@@ -842,7 +864,7 @@ static int drive_getcaps(struct burn_drive *d, struct burn_drive_info *out)
 	a ssert(d->mdata);
 #endif
 
-	if (!d->idata->valid || !d->mdata->valid)
+	if(d->idata->valid <= 0 || d->mdata->valid <= 0)
 		return 0;
 
 	id = (struct burn_scsi_inquiry_data *)d->idata;
@@ -908,7 +930,7 @@ int burn_drive_scan_sync(struct burn_drive_info *drives[],
 	*/
 	unsigned char scanned[32];
 	unsigned count = 0;
-	int i;
+	int i, ret;
 
 	/* ts A61007 : moved up to burn_drive_scan() */
 	/* a ssert(burn_running); */
@@ -965,13 +987,22 @@ int burn_drive_scan_sync(struct burn_drive_info *drives[],
 		if (drive_array[i].global_index < 0)
 	continue;		/* invalid device */
 
-		while (!drive_getcaps(&drive_array[i],
-				      &(*drives)[*n_drives])) {
+		/* ts A90602 : This old loop is not plausible. See A70907.
+		  while (!drive_getcaps(&drive_array[i],
+		         &(*drives)[*n_drives])) {
 			sleep(1);
-		}
-		(*n_drives)++;
+		  }
+		*/
+		/* ts A90602 : A single call shall do (rather than a loop) */
+		ret = drive_getcaps(&drive_array[i], &(*drives)[*n_drives]);
+		if (ret > 0)
+			(*n_drives)++;
 		scanned[i / 8] |= 1 << (i % 8);
 	}
+	if (*drives != NULL && *n_drives == 0) {
+		free ((char *) *drives);
+		*drives = NULL;
+	}
 
 	return(1);
 }
@@ -1127,14 +1158,14 @@ void burn_sectors_to_msf(int sectors, int *m, int *s, int *f)
 
 int burn_drive_get_read_speed(struct burn_drive *d)
 {
-	if(!d->mdata->valid)
+	if(d->mdata->valid <= 0)
 		return 0;
 	return d->mdata->max_read_speed;
 }
 
 int burn_drive_get_write_speed(struct burn_drive *d)
 {
-	if(!d->mdata->valid)
+	if(d->mdata->valid <= 0)
 		return 0;
 	return d->mdata->max_write_speed;
 }
@@ -1142,7 +1173,7 @@ int burn_drive_get_write_speed(struct burn_drive *d)
 /* ts A61021 : New API function */
 int burn_drive_get_min_write_speed(struct burn_drive *d)
 {
-	if(!d->mdata->valid)
+	if(d->mdata->valid <= 0)
 		return 0;
 	return d->mdata->min_write_speed;
 }
@@ -1729,6 +1760,10 @@ int burn_abort(int patience,
 	unsigned long wait_grain= 100000;
 	time_t start_time, current_time, pacifier_time, end_time;
 
+#ifndef NIX
+	time_t stdio_patience = 3;
+#endif
+
 	current_time = start_time = pacifier_time = time(0);
 	end_time = start_time + patience;
 
@@ -1744,10 +1779,38 @@ int burn_abort(int patience,
 			occup = burn_drive_is_occupied(&(drive_array[i]));
 			if(occup == -2)
 		continue;
+
 			if(drive_array[i].drive_role != 1) {
+
+#ifdef NIX
+
+				/* ts A90302
+				   <<< this causes a race condition with drive
+				       usage and drive disposal.
+			  	*/
 				drive_array[i].busy = BURN_DRIVE_IDLE;
 				burn_drive_forget(&(drive_array[i]), 1);
-			} else if(occup <= 10) {
+		continue;
+
+#else /* NIX */
+
+				/* ts A90318
+				   >>> but if a pipe breaks then the drive
+				       never gets idle.
+				   So for now with a short patience timespan
+				   and eventually a deliberate memory leak.
+			  	*/
+				if (current_time - start_time >
+				    stdio_patience) {
+					drive_array[i].global_index = -1;
+		continue;
+				}
+
+#endif /* ! NIX */
+
+			}
+
+			if(occup <= 10) {
 				burn_drive_forget(&(drive_array[i]), 1);
 			} else if(occup <= 100) {
 				if(first_round)
@@ -2037,7 +2100,7 @@ int burn_drive_get_speedlist(struct burn_drive *d,
 	struct burn_speed_descriptor *sd, *csd = NULL;
 
 	(*speed_list) = NULL;
-	if(!d->mdata->valid)
+	if(d->mdata->valid <= 0)
 		return 0;
 	for (sd = d->mdata->speed_descriptors; sd != NULL; sd = sd->next) {
 		ret = burn_speed_descriptor_new(&csd, NULL, csd, 0);
@@ -2062,7 +2125,7 @@ int burn_drive_get_best_speed(struct burn_drive *d, int speed_goal,
 	if (speed_goal < 0)
 		best_speed = 2000000000;
 	*best_descr = NULL;
-	if(!d->mdata->valid)
+	if(d->mdata->valid <= 0)
 		return 0;
 	for (sd = d->mdata->speed_descriptors; sd != NULL; sd = sd->next) {
 		if (flag & 1)

libburn/libburn.h

@@ -3,11 +3,15 @@
 #ifndef LIBBURN_H
 #define LIBBURN_H
 
-/* Needed for  off_t  which is the (POSIX-ly) appropriate type for
-   expressing a file or stream size.
+/* 
+
+Applications must use 64 bit off_t. E.g. by defining
+  #define _LARGEFILE_SOURCE
+  #define _FILE_OFFSET_BITS 64
+or take special precautions to interface with the library by 64 bit integers
+where this .h files prescribe off_t. Not to use 64 bit file i/o will keep the
+application from producing and processing ISO images of more than 2 GB size.
 
-   XXX we should enforce 64-bitness for off_t
-   ts A61101 : this is usually done by the build system (if it is not broken)
 */
 #include <sys/types.h>
 
@@ -1384,6 +1388,28 @@ int burn_precheck_write(struct burn_write_opts *o, struct burn_disc *disc,
 */
 void burn_disc_write(struct burn_write_opts *o, struct burn_disc *disc);
 
+
+/* ts A90227 */
+/** Control stream recording during the write run and eventually set the start
+    LBA for stream recording.
+    Stream recording is set from struct burn_write_opts when the write run
+    gets started. See burn_write_opts_set_stream_recording().
+    The call described here can be used later to override this setting and
+    to program automatic switching at a given LBA. It also affects subsequent
+    calls to burn_random_access_write().
+    @param drive    The drive which performs the write operation.
+    @param recmode  -1= disable stream recording
+                     0= leave setting as is
+                     1= enable stream recording
+    @param start    The LBA where actual stream recording shall start.
+                    (0 means unconditional stream recording)
+    @param flag     Bitfield for control purposes (unused yet, submit 0).
+    @return         1=success , <=0 failure
+    @since 0.6.4
+*/
+int burn_drive_set_stream_recording(struct burn_drive *drive, int recmode,
+                                    int start, int flag);
+
 /** Cancel an operation on a drive.
     This will only work when the drive's busy state is BURN_DRIVE_READING or
     BURN_DRIVE_WRITING.
@@ -1902,12 +1928,15 @@ void burn_write_opts_set_force(struct burn_write_opts *opts, int use_force);
 
 /* ts A80412 */
 /** Eventually makes use of the more modern write command AAh WRITE12 and
-    sets the Streaming bit. With DVD-RAM this can override the traditional
-    slowdown to half nominal speed. But if it speeds up writing then it also
-    disables error management and correction. Weigh your priorities.
-    This only affects the write operations of burn_disc_write().
+    sets the Streaming bit. With DVD-RAM and BD this can override the
+    traditional slowdown to half nominal speed. But if it speeds up writing
+    then it also disables error management and correction. Weigh your
+    priorities. This affects the write operations of burn_disc_write()
+    and subsequent calls of burn_random_access_write().
     @param opts The write opts to change
     @param value  0=use 2Ah WRITE10, 1=use AAh WRITE12 with Streaming bit
+                  @since 0.6.4:
+                  >=16 use WRITE12 but not before the LBA given by value
     @since 0.4.6
 */
 void burn_write_opts_set_stream_recording(struct burn_write_opts *opts, 
@@ -2230,8 +2259,8 @@ void burn_version(int *major, int *minor, int *micro);
 
 */
 #define burn_header_version_major  0
-#define burn_header_version_minor  5
-#define burn_header_version_micro  9
+#define burn_header_version_minor  6
+#define burn_header_version_micro  8
 /** Note:
     Above version numbers are also recorded in configure.ac because libtool
     wants them as parameters at build time.

libburn/libdax_msgs.c

@@ -1,7 +1,7 @@
 
 /* libdax_msgs
    Message handling facility of libdax.
-   Copyright (C) 2006 - 2008 Thomas Schmitt <scdbackup@gmx.net>,
+   Copyright (C) 2006 - 2009 Thomas Schmitt <scdbackup@gmx.net>,
    provided under GPL version 2
 */
 

libburn/libdax_msgs.h

@@ -1,7 +1,7 @@
 
 /* libdax_msgs
    Message handling facility of libdax.
-   Copyright (C) 2006-2008 Thomas Schmitt <scdbackup@gmx.net>,
+   Copyright (C) 2006-2009 Thomas Schmitt <scdbackup@gmx.net>,
    provided under GPL version 2
 */
 
@@ -536,6 +536,20 @@ Range "scdbackup"          :  0x00020000 to 0x0002ffff
  0x00020161 (WARNING,HIGH) = Empty session deleted
  0x00020162 (SORRY,HIGH)   = BD-R not unformatted blank any more. Cannot format
  0x00020163 (NOTE,HIGH)    = Blank BD-R left unformatted for zero spare capacity
+ 0x00020164 (SORRY,HIGH)   = Drive does not format BD-RE without spares
+ 0x00020165 (WARNING,HIGH) = Drive does not support fast formatting
+ 0x00020166 (WARNING,HIGH) = Drive does not support full formatting
+ 0x00020167 (SORRY,HIGH)   = Drive does not support non-default formatting
+ 0x00020168 (FAILURE,HIGH) = Media not properly formatted. Cannot write.
+ 0x00020169 (WARNING,HIGH) = Last session on media is still open
+ 0x0002016a (FAILURE,HIGH) = No MMC transport adapter is present
+ 0x0002016b (WARNING,HIGH) = No MMC transport adapter is present
+ 0x0002016c (DEBUG,HIGH)   = No MMC transport adapter is present
+ 0x0002016e (DEBUG,HIGH)   = MODE SENSE page 2A too short
+ 0x0002016f (DEBUG,HIGH)   = Unable to grab scanned drive
+ 0x00020170 (NOTE,HIGH)    = Closing open session before writing new one
+ 0x00020171 (NOTE,HIGH)    = Closing BD-R with accidently open session
+ 
 
  libdax_audioxtr:
  0x00020200 (SORRY,HIGH)   = Cannot open audio source file

libburn/mmc.c

@@ -55,10 +55,10 @@ extern struct libdax_msgs *libdax_messenger;
 /* ts A70306 */
 #define Libburn_support_dvd_plus_R 1
 
-/* ts A70509 : handling 0x41 and 0x42 as read-only types */
+/* ts A70509 : handling 0x41 as read-only type */
 #define Libburn_support_bd_r_readonlY 1
 
-/* >>> ts A81208 */
+/* ts A81208 */
 #define Libburn_support_bd_plus_r_srM 1
 
 
@@ -77,6 +77,12 @@ extern struct libdax_msgs *libdax_messenger;
  # define Libburn_do_not_format_dvd_ram_or_bd_rE 1
 */
 
+
+/* ts A90603 : Simulate the command restrictions of an old MMC-1 drive
+ # define Libisofs_simulate_old_mmc1_drivE 1
+*/
+
+
 /* DVD/BD progress report:
    ts A61219 : It seems to work with a used (i.e. thoroughly formatted) DVD+RW.
                Error messages of class DEBUG appear because of inability to
@@ -124,6 +130,7 @@ extern struct libdax_msgs *libdax_messenger;
                BD-RE is now an officially supported profile.
    ts A81209 : The first two sessions have been written to BD-R SRM
                (auto formatted without Defect Management).
+   ts A90107 : BD-R is now supported media type
 */
 
 /* ts A70519 : With MMC commands of data direction FROM_DRIVE:
@@ -744,7 +751,7 @@ int mmc_write(struct burn_drive *d, int start, struct buffer *buf)
 		mmc_wait_for_buffer_free(d, buf);
 
 	/* ts A80412 */
-	if(d->do_stream_recording > 0)  {
+	if(d->do_stream_recording > 0 && start >= d->stream_recording_start) {
 
 		/* >>> ??? is WRITE12 available ?  */
 			/* >>> ??? inquire feature 107h Stream Writing bit ? */
@@ -1459,6 +1466,75 @@ inquire_drive:;
 }
 
 
+/* ts A61201 */
+static char *mmc_obtain_profile_name(int profile_number)
+{
+	static char *texts[0x53] = {NULL};
+	int i, max_pno = 0x53;
+	
+	if (texts[0] == NULL) {
+		for (i = 0; i<max_pno; i++)
+			texts[i] = "";
+		/* mmc5r03c.pdf , Table 89, Spelling: guessed cdrecord style */
+		texts[0x01] = "Non-removable disk";
+		texts[0x02] = "Removable disk";
+		texts[0x03] = "MO erasable";
+		texts[0x04] = "Optical write once";
+		texts[0x05] = "AS-MO";
+		texts[0x08] = "CD-ROM";
+		texts[0x09] = "CD-R";
+		texts[0x0a] = "CD-RW";
+		texts[0x10] = "DVD-ROM";
+		texts[0x11] = "DVD-R sequential recording";
+		texts[0x12] = "DVD-RAM";
+		texts[0x13] = "DVD-RW restricted overwrite";
+		texts[0x14] = "DVD-RW sequential recording";
+		texts[0x15] = "DVD-R/DL sequential recording";
+		texts[0x16] = "DVD-R/DL layer jump recording";
+		texts[0x1a] = "DVD+RW";
+		texts[0x1b] = "DVD+R";
+		texts[0x2a] = "DVD+RW/DL";
+		texts[0x2b] = "DVD+R/DL";
+		texts[0x40] = "BD-ROM";
+		texts[0x41] = "BD-R sequential recording";
+		texts[0x42] = "BD-R random recording";
+		texts[0x43] = "BD-RE";
+		texts[0x50] = "HD-DVD-ROM";
+		texts[0x51] = "HD-DVD-R";
+		texts[0x52] = "HD-DVD-RAM";
+	}
+	if (profile_number<0 || profile_number>=max_pno)
+		return "";
+	return texts[profile_number];
+}
+
+
+/* ts A90603 : to be used if the drive knows no GET CONFIGURATION
+*/
+static int mmc_guess_profile(struct burn_drive *d, int flag)
+{
+	int cp;
+
+	cp = 0;
+	if (d->status == BURN_DISC_BLANK ||
+	    d->status == BURN_DISC_APPENDABLE) {
+		cp = 0x09;
+	} else if (d->status == BURN_DISC_FULL) {
+		cp = 0x08;
+	}
+	if (cp)
+		if (d->erasable)
+			cp = 0x0a;
+	d->current_profile = cp;
+	if (cp == 0)
+		return 0;
+	d->current_is_cd_profile = 1;
+	d->current_is_supported_profile = 1;
+	strcpy(d->current_profile_text, mmc_obtain_profile_name(cp));
+	return 1;
+}
+
+
 static int mmc_read_disc_info_al(struct burn_drive *d, int *alloc_len)
 {
 	struct buffer buf;
@@ -1466,8 +1542,8 @@ static int mmc_read_disc_info_al(struct burn_drive *d, int *alloc_len)
 	struct command c;
 	char msg[160];
 	/* ts A70131 : had to move mmc_read_toc() to end of function */
-	int do_read_toc = 0, session_state, disc_status, len, old_alloc_len;
-	int ret;
+	int do_read_toc = 0, disc_status, len, old_alloc_len;
+	int ret, number_of_sessions = -1;
 
 	/* ts A61020 */
 	d->start_lba = d->end_lba = -2000000000;
@@ -1526,6 +1602,9 @@ static int mmc_read_disc_info_al(struct burn_drive *d, int *alloc_len)
 	d->erasable = !!(data[2] & 16);
 
  	disc_status = data[2] & 3;
+	d->state_of_last_session = (data[2] >> 2) & 3;
+	number_of_sessions = (data[9] << 8) | data[4];
+
 	if (d->current_profile == 0x10 || d->current_profile == 0x40) {
 							 /* DVD-ROM , BD-ROM */
 		disc_status = 2; /* always full and finalized */
@@ -1581,16 +1660,35 @@ regard_as_blank:;
 		ret = mmc_read_capacity(d);
 		/* Freshly formatted, unwritten BD-R pretend to be appendable
 		   but in our model they need to be regarded as blank.
+		   Criterion: BD-R seq, read capacity known and 0,
+		              declared appendable, single empty session
 		*/
-		if (d->current_profile == 0x41 && ret > 0 &&
+		if (d->current_profile == 0x41 &&
 		    d->status == BURN_DISC_APPENDABLE &&
-		    d->media_read_capacity == 0)
+		    ret > 0 && d->media_read_capacity == 0 &&
+		    d->state_of_last_session == 0 && number_of_sessions == 1)
 			goto regard_as_blank;
 
+		if (d->current_profile == 0x41 &&
+		    d->status == BURN_DISC_APPENDABLE &&
+		    d->state_of_last_session == 1) {
+
+			/* ??? apply this test to other media types ? */
+
+			libdax_msgs_submit(libdax_messenger, d->global_index,
+				 0x00020169,
+				 LIBDAX_MSGS_SEV_WARNING, LIBDAX_MSGS_PRIO_HIGH,
+				 "Last session on media is still open.", 0, 0);
+		}
+
 		do_read_toc = 1;
 		break;
 	}
 
+	/* ts A90603 : An MMC-1 drive might not know the media type yet */
+	if (d->current_is_guessed_profile && d->current_profile == 0)
+		mmc_guess_profile(d, 0);
+
 	if ((d->current_profile != 0 || d->status != BURN_DISC_UNREADY) 
 		&& ! d->current_is_supported_profile) {
 		if (!d->silent_on_scsi_error) {
@@ -1606,7 +1704,7 @@ regard_as_blank:;
 		return 0;
 	}
 
-	/* >>> ts A61217 : Note for future
+	/* ts A61217 : Note for future
 	   growisofs performs OPC if (data[0]<<8)|data[1]<=32
 	   which indicates no OPC entries are attached to the
 	   reply from the drive.
@@ -1634,10 +1732,9 @@ regard_as_blank:;
 		d->complete_sessions = 0;
 	} else {
 		/* ts A70131 : number of non-empty sessions */
-		d->complete_sessions = (data[9] << 8) | data[4];
-		session_state = (data[2] >> 2) & 3;
+		d->complete_sessions = number_of_sessions;
 		/* mmc5r03c.pdf 6.22.3.1.3 State of Last Session: 3=complete */
-		if (session_state != 3 && d->complete_sessions >= 1)
+		if (d->state_of_last_session != 3 && d->complete_sessions >= 1)
 			d->complete_sessions--;
 
 		/* ts A70129 : mmc5r03c.pdf 6.22.3.1.7
@@ -2147,49 +2244,6 @@ void mmc_set_speed(struct burn_drive *d, int r, int w)
 }
 
 
-/* ts A61201 */
-static char *mmc_obtain_profile_name(int profile_number)
-{
-	static char *texts[0x53] = {NULL};
-	int i, max_pno = 0x53;
-	
-	if (texts[0] == NULL) {
-		for (i = 0; i<max_pno; i++)
-			texts[i] = "";
-		/* mmc5r03c.pdf , Table 89, Spelling: guessed cdrecord style */
-		texts[0x01] = "Non-removable disk";
-		texts[0x02] = "Removable disk";
-		texts[0x03] = "MO erasable";
-		texts[0x04] = "Optical write once";
-		texts[0x05] = "AS-MO";
-		texts[0x08] = "CD-ROM";
-		texts[0x09] = "CD-R";
-		texts[0x0a] = "CD-RW";
-		texts[0x10] = "DVD-ROM";
-		texts[0x11] = "DVD-R sequential recording";
-		texts[0x12] = "DVD-RAM";
-		texts[0x13] = "DVD-RW restricted overwrite";
-		texts[0x14] = "DVD-RW sequential recording";
-		texts[0x15] = "DVD-R/DL sequential recording";
-		texts[0x16] = "DVD-R/DL layer jump recording";
-		texts[0x1a] = "DVD+RW";
-		texts[0x1b] = "DVD+R";
-		texts[0x2a] = "DVD+RW/DL";
-		texts[0x2b] = "DVD+R/DL";
-		texts[0x40] = "BD-ROM";
-		texts[0x41] = "BD-R sequential recording";
-		texts[0x42] = "BD-R random recording";
-		texts[0x43] = "BD-RE";
-		texts[0x50] = "HD-DVD-ROM";
-		texts[0x51] = "HD-DVD-R";
-		texts[0x52] = "HD-DVD-RAM";
-	}
-	if (profile_number<0 || profile_number>=max_pno)
-		return "";
-	return texts[profile_number];
-}
-
-
 /* ts A61201 : found in unfunctional state
  */
 static int mmc_get_configuration_al(struct burn_drive *d, int *alloc_len)
@@ -2209,6 +2263,7 @@ static int mmc_get_configuration_al(struct burn_drive *d, int *alloc_len)
         d->current_profile_text[0] = 0;
 	d->current_is_cd_profile = 0;
 	d->current_is_supported_profile = 0;
+        d->current_is_guessed_profile = 0;
 	d->current_has_feat21h = 0;
 	d->current_feat21h_link_size = -1;
 	d->current_feat23h_byte4 = 0;
@@ -2231,8 +2286,24 @@ static int mmc_get_configuration_al(struct burn_drive *d, int *alloc_len)
 	c.dir = FROM_DRIVE;
 	d->issue_command(d, &c);
 
-	if (c.error)
+#ifdef Libisofs_simulate_old_mmc1_drivE
+	c.error = 1;
+	c.sense[2] = 0x5;
+	c.sense[12] = 0x20;
+	c.sense[13] = 0x0;
+#endif /* Libisofs_simulate_old_mmc1_drivE */
+
+	if (c.error) {
+		/* ts A90603 : MMC-1 drive do not know 46h GET CONFIGURATION */
+		if (c.sense[2] == 0x5 && c.sense[12] == 0x20 &&
+		    c.sense[13] == 0x0) {
+			d->current_is_guessed_profile = 1;
+			/* Will yield a non-zero profile only after
+			   mmc_read_disc_info_al() was called */
+			mmc_guess_profile(d, 0);
+		}
 		return 0;
+	}
 	old_alloc_len = *alloc_len;
 	*alloc_len = len = mmc_four_char_to_int(c.page->data);
 	if (len > old_alloc_len)
@@ -2852,7 +2923,8 @@ selected_not_suitable:;
 			d->current_profile == 0x14 ||
 			d->current_profile == 0x1a ||
 			d->current_profile == 0x12 ||
-			 d->current_profile == 0x43))
+			d->current_profile == 0x41 ||
+			d->current_profile == 0x43))
 			goto unsuitable_media;
 		      
 		format_type = d->format_descriptors[index].type;
@@ -2860,7 +2932,8 @@ selected_not_suitable:;
 		      format_type == 0x10 ||
 		      format_type == 0x11 || format_type == 0x13 ||
 		      format_type == 0x15 || format_type == 0x26 ||
- 		      format_type == 0x30 || format_type == 0x31 ))
+ 		      format_type == 0x30 || format_type == 0x31 ||
+		      format_type == 0x32))
 			goto selected_not_suitable;
 		if (flag & 4) {
 			num_of_blocks =
@@ -2872,7 +2945,8 @@ selected_not_suitable:;
 				 c.page->data[9 + i] =
 					( d->format_descriptors[index].tdp >>
 					  (16 - 8 * i)) & 0xff;
-		if (format_type == 0x30 || format_type == 0x31) {
+		if (format_type == 0x30 || format_type == 0x31 ||
+		    format_type == 0x32) {
 			if (flag & 64)
 				format_sub_type = 3; /* Quick certification */
 			else
@@ -3454,6 +3528,14 @@ static int mmc_get_write_performance_al(struct burn_drive *d,
 	c.page->bytes = 0;
 	c.dir = FROM_DRIVE;
 	d->issue_command(d, &c);
+
+#ifdef Libisofs_simulate_old_mmc1_drivE
+	c.error = 1;
+	c.sense[2] = 0x5;
+	c.sense[12] = 0x20;
+	c.sense[13] = 0x0;
+#endif /* Libisofs_simulate_old_mmc1_drivE */	
+
 	if (c.error)
 		return 0;
         len = mmc_four_char_to_int(c.page->data);
@@ -3789,6 +3871,7 @@ int mmc_setup_drive(struct burn_drive *d)
 	d->current_profile_text[0] = 0;
 	d->current_is_cd_profile = 0;
 	d->current_is_supported_profile = 0;
+	d->current_is_guessed_profile = 0;
 	d->current_has_feat21h = 0;
 	d->current_feat21h_link_size = -1;
 	d->current_feat23h_byte4 = 0;
@@ -3799,6 +3882,7 @@ int mmc_setup_drive(struct burn_drive *d)
 	d->bg_format_status = -1;
 	d->num_format_descr = 0;
 	d->complete_sessions = 0;
+	d->state_of_last_session = -1;
 	d->last_track_no = 1;
 	d->media_capacity_remaining = 0;
 	d->media_lba_limit = 0;

libburn/options.c

@@ -143,7 +143,7 @@ int burn_write_opts_set_simulate(struct burn_write_opts *opts, int sim)
 int burn_write_opts_set_underrun_proof(struct burn_write_opts *opts,
 				       int underrun_proof)
 {
-	if (!opts->drive->mdata->valid)
+	if (opts->drive->mdata->valid <= 0)
 		return 0;
 	if (opts->drive->mdata->underrun_proof) {
 		opts->underrun_proof = underrun_proof;
@@ -385,7 +385,7 @@ void burn_write_opts_set_force(struct burn_write_opts *opts, int use_force)
 void burn_write_opts_set_stream_recording(struct burn_write_opts *opts,
 					 int value)
 {
-	opts->do_stream_recording = !!value;
+	opts->do_stream_recording = value;
 }
 
 

libburn/os-dummy.h

@@ -0,0 +1,63 @@
+
+/* os-dummy.h
+   Operating system specific libburn definitions and declarations. Included
+   by os.h in case of compilation for
+           Unknown POSIX like systems
+           with the dummy MMC transport adapter sg-dummy.c
+
+   Copyright (C) 2009 Thomas Schmitt <scdbackup@gmx.net>, provided under GPL
+*/
+
+
+/** List of all signals which shall be caught by signal handlers and trigger
+    a graceful abort of libburn. (See man 7 signal.)
+*/
+/* Once as system defined macros */
+#define BURN_OS_SIGNAL_MACRO_LIST \
+ SIGHUP, SIGINT, SIGQUIT, SIGILL, SIGABRT, \
+ SIGFPE, SIGSEGV, SIGPIPE, SIGALRM, SIGTERM, \
+ SIGUSR1, SIGUSR2, SIGXCPU, SIGTSTP, SIGTTIN, \
+ SIGTTOU
+
+/* Once as text 1:1 list of strings for messages and interpreters */
+#define BURN_OS_SIGNAL_NAME_LIST \
+ "SIGHUP", "SIGINT", "SIGQUIT", "SIGILL", "SIGABRT", \
+ "SIGFPE", "SIGSEGV", "SIGPIPE", "SIGALRM", "SIGTERM", \
+ "SIGUSR1", "SIGUSR2", "SIGXCPU", "SIGTSTP", "SIGTTIN", \
+ "SIGTTOU"
+
+/* The number of above list items */
+#define BURN_OS_SIGNAL_COUNT 16
+
+/** To list all signals which shall surely not be caught */
+#define BURN_OS_NON_SIGNAL_MACRO_LIST \
+SIGKILL, SIGCHLD, SIGSTOP
+
+/* The number of above list items */
+#define BURN_OS_NON_SIGNAL_COUNT 3
+
+
+/* The maximum size for a (SCSI) i/o transaction */
+/* Important : MUST be at least 32768 ! */
+#define BURN_OS_TRANSPORT_BUFFER_SIZE 65536
+
+
+/* To hold the position of the most recently delivered address from
+   device enumeration.
+*/
+struct burn_drive_enumerator_struct {
+	int pos;
+	int info_count;
+	char **info_list;
+};
+
+#define BURN_OS_DEFINE_DRIVE_ENUMERATOR_T \
+typedef struct burn_drive_enumerator_struct burn_drive_enumerator_t;
+
+
+/* The list of operating system dependent elements in struct burn_drive.
+   Usually they are initialized in  sg-*.c:enumerate_common().
+*/
+#define BURN_OS_TRANSPORT_DRIVE_ELEMENTS \
+	int just_a_dummy;
+

libburn/os.h

@@ -3,7 +3,7 @@
    Operating system specific libburn definitions and declarations.
    The macros defined here are used by libburn modules in order to
    avoid own system dependent case distinctions.
-   Copyright (C) 2006 Thomas Schmitt <scdbackup@gmx.net>, provided under GPL
+   Copyright (C) 2009 Thomas Schmitt <scdbackup@gmx.net>, provided under GPL
 */
 
 #ifndef BURN_OS_H_INCLUDED
@@ -20,14 +20,23 @@
 #include "os-freebsd.h"
 
 
-#else  /* operating system case distinction */
+#else
+#ifdef __linux
 
 
 /* --------- Linux kernels 2.4 and 2.6 with Linux SCSI Generic (sg) -------- */
 #include "os-linux.h"
 
 
-#endif /* End of operating system case distinction */
+#else
+
+
+/* --------- Any other system. With dummy MMC transport sg-dummy.c --------- */
+#include "os-dummy.h"
+
+
+#endif /* ! __linux */
+#endif /* ! __FreeBSD__ */
 
 
 #endif /* ! BURN_OS_H_INCLUDED */

libburn/sg-dummy.c

@@ -0,0 +1,229 @@
+/* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */
+
+/*
+
+This is the main operating system dependent SCSI part of libburn. It implements
+the transport level aspects of SCSI control and command i/o.
+
+Present implementation: default dummy which enables libburn only to work
+                        with stdio: pseudo drive addresses.
+                        For real implementations see sg-linux.c or sg-freebsd.c
+
+*/
+
+
+#include <unistd.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+#include <string.h>
+
+#ifdef Libburn_os_has_statvfS
+#include <sys/statvfs.h>
+#endif /* Libburn_os_has_stavtfS */
+
+#include "transport.h"
+#include "drive.h"
+#include "sg.h"
+#include "spc.h"
+#include "mmc.h"
+#include "sbc.h"
+#include "debug.h"
+#include "toc.h"
+#include "util.h"
+
+#include "libdax_msgs.h"
+extern struct libdax_msgs *libdax_messenger;
+
+
+/** Returns the next index number and the next enumerated drive address.
+    The enumeration has to cover all available and accessible drives. It is
+    allowed to return addresses of drives which are not available but under
+    some (even exotic) circumstances could be available. It is on the other
+    hand allowed, only to hand out addresses which can really be used right
+    in the moment of this call. (This implementation chooses the former.)
+    @param idx An opaque handle. Make no own theories about it.
+    @param adr Takes the reply
+    @param adr_size Gives maximum size of reply including final 0
+    @param initialize  1 = start new,
+                       0 = continue, use no other values for now
+                      -1 = finish
+    @return 1 = reply is a valid address , 0 = no further address available
+           -1 = severe error (e.g. adr_size too small)
+*/
+int sg_give_next_adr(burn_drive_enumerator_t *idx,
+		     char adr[], int adr_size, int initialize)
+{
+	return 0;
+}
+
+
+/** Brings all available, not-whitelist-banned, and accessible drives into
+    libburn's list of drives.
+*/
+/* ts A61115: replacing call to sg-implementation internals from drive.c */
+int scsi_enumerate_drives(void)
+{
+	libdax_msgs_submit(libdax_messenger, -1, 0x0002016b,
+		LIBDAX_MSGS_SEV_WARNING, LIBDAX_MSGS_PRIO_HIGH,
+		"No MMC transport adapter is present. Running on sg-dummy.c.",
+		0, 0);
+	return 1;
+}
+
+
+/** Tells wether libburn has the given drive in use or exclusively reserved.
+    If it is "open" then libburn will eventually call sg_release() on it when
+    it is time to give up usage resp. reservation.
+*/
+/** Published as burn_drive.drive_is_open() */
+int sg_drive_is_open(struct burn_drive * d)
+{
+	return 0;
+}
+
+
+/** Opens the drive for SCSI commands and - if burn activities are prone
+    to external interference on your system - obtains an exclusive access lock
+    on the drive. (Note: this is not physical tray locking.)
+    A drive that has been opened with sg_grab() will eventually be handed
+    over to sg_release() for closing and unreserving.
+*/
+int sg_grab(struct burn_drive *d)
+{
+	libdax_msgs_submit(libdax_messenger, d->global_index, 0x0002016a,
+		LIBDAX_MSGS_SEV_FAILURE, LIBDAX_MSGS_PRIO_HIGH,
+		"No MMC transport adapter is present. Running on sg-dummy.c.",
+		0, 0);
+	return 0;
+}
+
+
+/** Gives up the drive for SCSI commands and releases eventual access locks.
+    (Note: this is not physical tray locking.)
+*/
+int sg_release(struct burn_drive *d)
+{
+	return 0;
+}
+
+
+/** Sends a SCSI command to the drive, receives reply and evaluates wether
+    the command succeeded or shall be retried or finally failed.
+    Returned SCSI errors shall not lead to a return value indicating failure.
+    The callers get notified by c->error. An SCSI failure which leads not to
+    a retry shall be notified via scsi_notify_error().
+    The Libburn_log_sg_commandS facility might be of help when problems with
+    a drive have to be examined. It shall stay disabled for normal use.
+    @return: 1 success , <=0 failure
+*/
+int sg_issue_command(struct burn_drive *d, struct command *c)
+{
+	libdax_msgs_submit(libdax_messenger, d->global_index, 0x0002016a,
+		LIBDAX_MSGS_SEV_FAILURE, LIBDAX_MSGS_PRIO_HIGH,
+		"No MMC transport adapter is present. Running on sg-dummy.c.",
+		0, 0);
+	return -1;
+}
+
+
+/** Tries to obtain SCSI address parameters.
+    @return  1 is success , 0 is failure
+*/
+int sg_obtain_scsi_adr(char *path, int *bus_no, int *host_no, int *channel_no,
+                       int *target_no, int *lun_no)
+{
+        libdax_msgs_submit(libdax_messenger, -1, 0x0002016c,
+                LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_HIGH,
+                "No MMC transport adapter is present. Running on sg-dummy.c.",
+                0, 0);
+	return 0;
+}
+
+
+/** Tells wether a text is a persistent address as listed by the enumeration
+    functions.
+*/
+int sg_is_enumerable_adr(char *adr)
+{
+	return(0);
+}
+
+
+/** Estimate the potential payload capacity of a file address.
+    @param path  The address of the file to be examined. If it does not
+                 exist yet, then the directory will be inquired.
+    @param bytes The pointed value gets modified, but only if an estimation is
+                 possible.
+    @return      -2 = cannot perform necessary operations on file object
+                 -1 = neither path nor dirname of path exist
+                  0 = could not estimate size capacity of file object
+                  1 = estimation has been made, bytes was set
+*/
+int burn_os_stdio_capacity(char *path, off_t *bytes)
+{
+	struct stat stbuf;
+
+#ifdef Libburn_os_has_statvfS
+	struct statvfs vfsbuf;
+#endif
+
+	char testpath[4096], *cpt;
+	long blocks;
+	off_t add_size = 0;
+
+	testpath[0] = 0;
+	blocks = *bytes / 512;
+	if (stat(path, &stbuf) == -1) {
+		strcpy(testpath, path);
+		cpt = strrchr(testpath, '/');
+		if(cpt == NULL)
+			strcpy(testpath, ".");
+		else if(cpt == testpath)
+			testpath[1] = 0;
+		else
+			*cpt = 0;
+		if (stat(testpath, &stbuf) == -1)
+			return -1;
+
+#ifdef Libburn_if_this_was_linuX
+
+	} else if(S_ISBLK(stbuf.st_mode)) {
+		fd = open(path, open_mode);
+		if (fd == -1)
+			return -2;
+		ret = ioctl(fd, BLKGETSIZE, &blocks);
+		close(fd);
+		if (ret == -1)
+			return -2;
+		*bytes = ((off_t) blocks) * (off_t) 512;
+
+#endif /* Libburn_if_this_was_linuX */
+
+	} else if(S_ISREG(stbuf.st_mode)) {
+		add_size = stbuf.st_blocks * (off_t) 512;
+		strcpy(testpath, path);
+	} else
+		return 0;
+
+	if (testpath[0]) {	
+
+#ifdef Libburn_os_has_statvfS
+
+		if (statvfs(testpath, &vfsbuf) == -1)
+			return -2;
+		*bytes = add_size + ((off_t) vfsbuf.f_bsize) *
+						(off_t) vfsbuf.f_bavail;
+
+#else /* Libburn_os_has_statvfS */
+
+		return 0;
+
+#endif /* ! Libburn_os_has_stavtfS */
+
+	}
+	return 1;
+}
+

libburn/sg-freebsd.c

@@ -1,6 +1,5 @@
 /* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */
 
-#include <assert.h>
 #include <errno.h>
 #include <unistd.h>
 #include <stdio.h>
@@ -553,11 +552,26 @@ int sg_issue_command(struct burn_drive *d, struct command *c)
 	if (c->page) {
 		ccb->csio.data_ptr  = c->page->data;
 		if (c->dir == FROM_DRIVE) {
-			ccb->csio.dxfer_len = BUFFER_SIZE;
+
+			/* ts A90430 : Ticket 148 , by jwehle :
+			   "On ... FreeBSD 6.4 which has a usb memory reader in
+			    addition to a ATAPI DVD burner sg_issue_command
+			    will hang while the SCSI bus is being scanned"
+			*/
+			if (c->dxfer_len >= 0)
+				ccb->csio.dxfer_len = c->dxfer_len;
+			else
+				ccb->csio.dxfer_len = BUFFER_SIZE;
+
 /* touch page so we can use valgrind */
 			memset(c->page->data, 0, BUFFER_SIZE);
 		} else {
-			assert(c->page->bytes > 0);
+			/* ts A90430 */
+			/* a ssert(c->page->bytes > 0); */
+			if (c->page->bytes <= 0) {
+				c->error = 1;
+				return 0;
+			}
 			ccb->csio.dxfer_len = c->page->bytes;
 		}
 	} else {

libburn/sg-linux.c

@@ -470,7 +470,7 @@ static int sg_fcntl_lock(int *fd, char *fd_name, int l_type, int verbous)
 /* ts A60926 */
 static int sg_open_drive_fd(char *fname, int scan_mode)
 {
-	int open_mode = O_RDWR, fd;
+	int open_mode = O_RDWR, fd, tries= 0;
 	char msg[81];
 
 	/* ts A70409 : DDLP-B */
@@ -502,7 +502,8 @@ static int sg_open_drive_fd(char *fname, int scan_mode)
 		"libburn: experimental: O_EXCL= %d , O_NDELAY= %d\n",
 		!!(open_mode&O_EXCL),!!(open_mode&O_NDELAY));
 */
-          
+
+try_open:;
 	fd = open(fname, open_mode);
 	if (fd == -1) {
 /* <<< debugging
@@ -511,6 +512,17 @@ static int sg_open_drive_fd(char *fname, int scan_mode)
 			fname,errno);
 */
 		if (errno == EBUSY) {
+			tries++;
+
+/* <<< debugging
+			fprintf(stderr,
+				"\nlibburn_DEBUG: EBUSY , tries= %d\n", tries);
+*/
+
+			if (tries < 4) {
+				usleep(2000000);
+				goto try_open;
+			}
 			sg_handle_busy_device(fname, errno);
 			return -1;
 			
@@ -793,7 +805,7 @@ static int is_scsi_drive(char *fname, int *bus_no, int *host_no,
 		if (ret<=0) {
 			if (linux_sg_enumerate_debug)
 				fprintf(stderr, "cannot lock siblings\n"); 
-				sg_handle_busy_device(fname, 0);
+			sg_handle_busy_device(fname, 0);
 			return 0;
 		}
 		/* the final occupation will be done in sg_grab() */

libburn/sg.c

@@ -1,7 +1,7 @@
 
 /* sg.c
    Switcher for operating system dependent transport level modules of libburn.
-   Copyright (C) 2006 Thomas Schmitt <scdbackup@gmx.net>, provided under GPL
+   Copyright (C) 2009 Thomas Schmitt <scdbackup@gmx.net>, provided under GPL
 */
 
 
@@ -10,8 +10,32 @@
 #include "sg-freebsd.c"
 
 #else
+#ifdef __linux
 
 #include "sg-linux.c"
 
-#endif
+#else
+
+/* The dummy adapter formally fulfills the expectations of libburn towards
+   its SCSI command transport. It will show no drives and perform no SCSI
+   commands.
+   libburn will then be restricted to using its stdio pseudo drives.
+*/
+static int intentional_compiler_warning(void)
+{
+ int INTENTIONAL_COMPILER_WARNING_;
+ int Cannot_recognize_Linux_nor_FreeBSD_;
+ int Have_to_use_dummy_MMC_transport_adapter_;
+ int This_libburn_will_not_be_able_to_operate_on_real_CD_drives;
+ int Have_to_use_dummy_MMC_transport_adapter;
+ int Cannot_recognize_Linux_nor_FreeBSD;
+ int INTENTIONAL_COMPILER_WARNING;
+
+ return(0);
+}
+
+#include "sg-dummy.c"
+
+#endif /* ! __linux */
+#endif /* ! __FreeBSD__ */
 

libburn/spc.c

@@ -104,7 +104,9 @@ int spc_wait_unit_attention(struct burn_drive *d, int max_sec, char *cmd_text,
 				int flag)
 {
 	int i, ret = 1, key = 0, asc = 0, ascq = 0;
-	char msg[160];
+	char msg[320];
+	unsigned char sense[14];
+	enum response resp;
 
 	if (!(flag & 1))
 		usleep(100000);
@@ -138,10 +140,24 @@ int spc_wait_unit_attention(struct burn_drive *d, int max_sec, char *cmd_text,
 				/* media change notice = try again */
 				goto slumber;
 
+#ifdef NIX
 			sprintf(msg,
 		"Asynchromous SCSI error on %s: key=%X asc=%2.2Xh ascq=%2.2Xh",
 			 	cmd_text, (unsigned) key, (unsigned) asc,
 				(unsigned) ascq);
+#else
+
+			/* ts A90213 */
+			sprintf(msg,
+				"Asynchromous SCSI error on %s: ", cmd_text);
+			sense[2] = key;
+			sense[12] = asc;
+			sense[13] = ascq;
+			resp = scsi_error_msg(d, sense, 14, msg + strlen(msg),
+						 &key, &asc, &ascq);
+
+#endif /* ! NIX */
+
 			libdax_msgs_submit(libdax_messenger, d->global_index,
 				0x0002014d,
 				LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
@@ -275,7 +291,7 @@ void spc_allow(struct burn_drive *d)
 }
 
 /*
-ts A70518 : Do not call with *alloc_len < 8
+ts A70518 - A90603 : Do not call with *alloc_len < 10
 */
 /** flag&1= do only inquire alloc_len */
 static int spc_sense_caps_al(struct burn_drive *d, int *alloc_len, int flag)
@@ -287,13 +303,19 @@ static int spc_sense_caps_al(struct burn_drive *d, int *alloc_len, int flag)
 	unsigned char *page;
 	struct command c;
 	struct burn_speed_descriptor *sd;
+	char msg[BURN_DRIVE_ADR_LEN + 160];
 
 	/* ts A61225 : 1 = report about post-MMC-1 speed descriptors */
 	static int speed_debug = 0;
 
-	if (*alloc_len < 8)
+	if (*alloc_len < 10)
 		return 0;
 
+	/* ts A90602 : Clearing mdata before command execution */
+	m = d->mdata;
+	m->valid = 0;
+	burn_mdata_free_subs(m);
+
 	memset(&buf, 0, sizeof(buf));
 	scsi_init_command(&c, SPC_MODE_SENSE, sizeof(SPC_MODE_SENSE));
 /*
@@ -312,12 +334,11 @@ static int spc_sense_caps_al(struct burn_drive *d, int *alloc_len, int flag)
 	d->issue_command(d, &c);
 	if (c.error) {
 		memset(&buf, 0, sizeof(buf));
-		d->mdata->valid = -1;
+		m->valid = -1;
 		was_error = 1;
 	}
 
 	size = c.page->data[0] * 256 + c.page->data[1];
-	m = d->mdata;
 	page = c.page->data + 8;
 
 	/* ts A61225 :
@@ -326,18 +347,28 @@ static int spc_sense_caps_al(struct burn_drive *d, int *alloc_len, int flag)
 	   in MMC-3 6.3.11 there are at least 28 bytes plus a variable length
 	   set of speed descriptors. In MMC-5 E.11 it is declared "legacy".
 	*/
+	/* ts A90603 :
+	   SPC-1 8.3.3 enumerates mode page format bytes from 0 to n and
+	   defines Page Length as (n-1).
+	*/
 	page_length = page[1];
 	old_alloc_len = *alloc_len;
-	*alloc_len = page_length + 8;
+	*alloc_len = page_length + 10;
 	if (flag & 1)
 		return !was_error;
-	if (page_length + 8 > old_alloc_len)
-		page_length = old_alloc_len - 8;
-	if (page_length < 22)
-		return 0;
+	if (page_length + 10 > old_alloc_len)
+		page_length = old_alloc_len - 10;
 
-	m->valid = 0;
-	burn_mdata_free_subs(m);
+	/* ts A90602 : 20 asserts page[21]. (see SPC-1 8.3.3) */
+	if (page_length < 20) {
+		m->valid = -1;
+		sprintf(msg, "MODE SENSE page 2A too short: %s : %d",
+			d->devname, page_length);
+		libdax_msgs_submit(libdax_messenger, d->global_index,
+				0x0002016e, LIBDAX_MSGS_SEV_DEBUG,
+				LIBDAX_MSGS_PRIO_LOW, msg, 0, 0);
+		return 0;
+	}
 
 	m->buffer_size = page[12] * 256 + page[13];
 	m->dvdram_read = page[2] & 32;
@@ -368,12 +399,13 @@ static int spc_sense_caps_al(struct burn_drive *d, int *alloc_len, int flag)
 	m->min_end_lba = 0x7fffffff;
 	m->max_end_lba = 0;
 
-	m->valid = 1;
+	if (!was_error)
+		m->valid = 1;
 
 	mmc_get_configuration(d);
 
 	/* ts A61225 : end of MMC-1 , begin of MMC-3 */
-	if (page_length < 32) /* no write speed descriptors ? */
+	if (page_length < 30) /* no write speed descriptors ? */
 		goto try_mmc_get_performance;
 
 	m->cur_write_speed = page[28] * 256 + page[29];
@@ -397,12 +429,12 @@ static int spc_sense_caps_al(struct burn_drive *d, int *alloc_len, int flag)
 	}
 
 	for (i = 0; i < num_write_speeds; i++) {
-		speed = page[32 + 4*i + 2] * 256 + page[32 + 4*i + 3];
+		speed = page[32 + 4 * i + 2] * 256 + page[32 + 4 * i + 3];
 
 		if (speed_debug) 
 		fprintf(stderr,
 			"LIBBURN_DEBUG: write speed #%d = %d kB/s  (rc %d)\n",
-			i, speed, page[32 + 4*i +1] & 7);
+			i, speed, page[32 + 4 * i + 1] & 7);
 
 		/* ts A61226 */
 		ret = burn_speed_descriptor_new(&(d->mdata->speed_descriptors),
@@ -415,7 +447,7 @@ static int spc_sense_caps_al(struct burn_drive *d, int *alloc_len, int flag)
 				strcpy(sd->profile_name,
 					d->current_profile_text);
 			}
-			sd->wrc = (( page[32 + 4*i +1] & 7 ) == 1 );
+			sd->wrc = (( page[32 + 4 * i + 1] & 7 ) == 1 );
 			sd->write_speed = speed;
 		}
 
@@ -443,7 +475,7 @@ try_mmc_get_performance:;
 
 void spc_sense_caps(struct burn_drive *d)
 {
-	int alloc_len, start_len = 22, ret;
+	int alloc_len, start_len = 30, ret;
 
 	if (mmc_function_spy(d, "sense_caps") <= 0)
 		return;
@@ -904,6 +936,18 @@ enum response scsi_error_msg(struct burn_drive *d, unsigned char *sense,
 		sprintf(msg,
 			"Logical unit is in the process of becoming ready");
 		return RETRY;
+	case 0x08:
+		if (*key != 4)
+			break;
+		if (*ascq == 0)
+			sprintf(msg, "Logical unit communication failure");
+		else if (*ascq == 1)
+			sprintf(msg, "Logical unit communication timeout");
+		else if (*ascq == 2)
+			sprintf(msg, "Logical unit communication parity error");
+		else if (*ascq == 3)
+			sprintf(msg, "Logical unit communication crc error");
+		return RETRY;
 	case 0x09:
 		if (*key != 4)
 			break;
@@ -1122,6 +1166,20 @@ enum response scsi_error_msg(struct burn_drive *d, unsigned char *sense,
 		else
 			break;
 		return FAIL;
+	case 0x73:
+		if (*key == 3 && *ascq == 0)
+			sprintf(msg, "CD control error");
+		else if (*key == 3 && *ascq == 2)
+			sprintf(msg, "Power calibration area is full");
+		else if (*key == 3 && *ascq == 3)
+			sprintf(msg, "Power calibration area error");
+		else if (*key == 3 && *ascq == 4)
+			sprintf(msg, "Program memory area update failure");
+		else if (*key == 3 && *ascq == 5)
+			sprintf(msg, "Program memory area is full");
+		else
+			break;
+		return FAIL;
 	}
 	sprintf(msg_data,
 		"Failure. See mmc3r10g.pdf: Sense Key %X ASC %2.2X ASCQ %2.2X",

libburn/transport.h

@@ -161,6 +161,8 @@ struct burn_drive
 	char current_profile_text[80];
 	int current_is_cd_profile;
 	int current_is_supported_profile;
+	/* ts A90603 */
+	int current_is_guessed_profile;
 
 	/* ts A70128 : MMC-to-MMC feature info from 46h for DVD-RW.
            Quite internal. Regard as opaque :)
@@ -205,6 +207,11 @@ struct burn_drive
 	               with BD-RE */
 	int do_stream_recording;
 
+        /* ts A90227 : the LBA where stream recording shall start.
+                       Writing to lower LBA will be done without streaming.
+        */
+        int stream_recording_start;
+
 	/* ts A61218 from 51h READ DISC INFORMATION */
 	int bg_format_status; /* 0=needs format start, 1=needs format restart*/
 
@@ -236,6 +243,9 @@ struct burn_drive
 
 	/* ts A70131 : from 51h READ DISC INFORMATION Number of Sessions (-1)*/
 	int complete_sessions;
+	/* ts A90107 */
+	int state_of_last_session;
+
 	/* ts A70129 :
 	   from 51h READ DISC INFORMATION Last Track Number in Last Session */
 	int last_track_no;

libburn/write.c

@@ -1159,19 +1159,29 @@ int burn_disc_close_track_dvd_minus_r(struct burn_write_opts *o,
 int burn_disc_finalize_dvd_plus_r(struct burn_write_opts *o)
 {
 	struct burn_drive *d = o->drive;
+	char msg[80];
 
+	sprintf(msg, "Finalizing %s ...",
+		d->current_profile_text);
 	libdax_msgs_submit(libdax_messenger, d->global_index,
 			0x00000002,
 			LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_ZERO,
-			"Finalizing DVD+R ...", 0, 0);
+			msg, 0, 0);
 
-	/* CLOSE SESSION, 101b, Finalize with minimal radius */
-	d->close_track_session(d, 2, 1);  /* (2<<1)|1 = 5 */
+	if(d->current_profile == 0x41) { /* BD-R */
+		/* CLOSE SESSION, 110b, Finalize Disc */
+		d->close_track_session(d, 3, 0);  /* (3<<1)|0 = 6 */
+	} else {
+		/* CLOSE SESSION, 101b, Finalize with minimal radius */
+		d->close_track_session(d, 2, 1);  /* (2<<1)|1 = 5 */
+	}
 
+	sprintf(msg, "... finalizing %s done               ",
+		d->current_profile_text);
 	libdax_msgs_submit(libdax_messenger, d->global_index,
 			0x00000002,
 			LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_ZERO,
-			"... finalizing DVD+R done               ", 0, 0);
+			msg, 0, 0);
 
 	return 1;
 }
@@ -1389,10 +1399,70 @@ int burn_disc_close_session_dvd_minus_r(struct burn_write_opts *o,
 int burn_dvd_write_session(struct burn_write_opts *o,
 				struct burn_session *s, int is_last_session)
 {
-	int i,ret;
+	int i, ret, multi_mem;
         struct burn_drive *d = o->drive;
 
-	/* >>> open_session ? */
+	/* ts A90108 */
+	if (d->current_profile == 0x41 && d->status == BURN_DISC_APPENDABLE &&
+	    d->state_of_last_session == 1) {
+		/* last session on BD-R is still open */;
+
+		/* BR-R were not closed by libburn-0.6.0.pl00 if o->multi==0.
+		   This leads to an unreadable, but recoverable) media state.
+		   Technically they are appendable although the last session
+		   is not readable.
+
+		   By default the open session gets closed here before the new
+		   session is written. E.g. after writing a small dummy seesion
+		   number 2 one can read session 1 and write session 3 which
+		   points to data of session 1.
+
+		   For the case that no media with 3 sessions is desired it is
+		   possible to activate the following coarse single-session
+		   closing code:
+		   No new session will be written but calling programs will
+		   report success. Quite misleading.
+		   Activate only if really needed by
+		   # define Libburn_bug_A90108_close_disC yes
+		*/
+
+
+#ifdef Libburn_bug_A90108_close_disC
+
+		/* Close open session and media. 
+		   That was the goal of the failed run which led to the
+		   unreadable (but recoverable) media state.
+
+		   It is not easy to implement a general close function for
+		   all media types. Therefore this pseudo write code is under
+		   control of #ifdef.
+		*/
+		libdax_msgs_submit(libdax_messenger, d->global_index,
+				0x00020171,
+				LIBDAX_MSGS_SEV_NOTE, LIBDAX_MSGS_PRIO_HIGH,
+				"Closing BD-R with accidently open session",
+				0, 0);
+ 		d->close_track_session(d, 3, 0); /* CLOSE SESSION, 110b */
+		d->state_of_last_session = 3; /* mark as complete session */
+		d->status = BURN_DISC_FULL;
+		sleep(3); /* The caller might need time to arrange itself */
+		return 1;
+
+#else /* Libburn_bug_A90108_close_disC */
+
+		/* This is the default mode.
+		*/
+		libdax_msgs_submit(libdax_messenger, d->global_index,
+				0x00020170,
+				LIBDAX_MSGS_SEV_NOTE, LIBDAX_MSGS_PRIO_HIGH,
+				"Closing open session before writing new one",
+				0, 0);
+ 		d->close_track_session(d, 1, 0); /* CLOSE SESSION, 010b */
+		d->state_of_last_session = 3; /* mark as complete session */
+
+#endif /* ! Libburn_bug_A90108_close_disC */
+
+	}
 
 	for (i = 0; i < s->tracks; i++) {
 		ret = burn_dvd_write_track(o, s, i,
@@ -1403,7 +1473,11 @@ int burn_dvd_write_session(struct burn_write_opts *o,
 	if (d->current_profile == 0x11 || d->current_profile == 0x14 ||
 	    d->current_profile == 0x15) {
 		/* DVD-R , DVD-RW Sequential, DVD-R/DL Sequential */
+		multi_mem = o->multi;
+		if (!is_last_session)
+			o->multi = 1;
 		ret = burn_disc_close_session_dvd_minus_r(o, s);
+		o->multi = multi_mem;
 		if (ret <= 0)
 			return 0;
 	} else if (d->current_profile == 0x12 || d->current_profile == 0x43) {
@@ -1771,6 +1845,13 @@ int burn_stdio_read_source(struct burn_source *source, char *buf, int bufsize,
 int burn_stdio_write(int fd, char *buf, int count, struct burn_drive *d, 
 			 int flag)
 {
+	if (d->cancel)
+		return 0;
+/*
+fprintf(stderr, "libburn_DEBUG: write(%d, %lX, %d)\n",
+                fd, (unsigned long) buf, count);
+*/
+
 	if (write(fd, buf, count) != count) {
 		libdax_msgs_submit(libdax_messenger, d->global_index,
 			0x00020148,
@@ -2019,9 +2100,9 @@ void burn_disc_write_sync(struct burn_write_opts *o, struct burn_disc *disc)
 {
 	struct cue_sheet *sheet;
 	struct burn_drive *d = o->drive;
-	struct buffer buf, *buffer_mem = o->drive->buffer;
+	struct buffer *buffer_mem = o->drive->buffer;
 	struct burn_track *lt, *t;
-	int first = 1, i, ret, lba, nwa = 0;
+	int first = 1, i, ret, lba, nwa = 0, multi_mem;
 	off_t default_size;
 	char msg[80];
 
@@ -2032,11 +2113,40 @@ void burn_disc_write_sync(struct burn_write_opts *o, struct burn_disc *disc)
 	/* ts A61224 */
 	burn_disc_init_write_status(o, disc); /* must be done very early */
 
-	/* ts A80412 */
-	d->do_stream_recording = o->do_stream_recording;
+	/* ts A80412 , A90227 */
+	d->do_stream_recording = !!o->do_stream_recording;
+	if (o->do_stream_recording >= 16)
+		d->stream_recording_start = o->do_stream_recording;
+	else
+		d->stream_recording_start = 0;
+
+	d->buffer = calloc(sizeof(struct buffer), 1);
+	if (d->buffer == NULL)
+		goto fail_wo_sync;
+
+
+/* >>> ts A90321
 
-	d->buffer = &buf;
 	memset(d->buffer, 0, sizeof(struct buffer));
+
+fprintf(stderr, "libburn_DEBUG: d->buffer = %lX , size = %d\n",
+                (unsigned long) d->buffer, (int) sizeof(struct buffer));
+
+calloc() seems not to have the desired effect. valgrind warns:
+==18251== Syscall param write(buf) points to uninitialised byte(s)
+==18251==    at 0x5071DEB: (within /lib64/libpthread-2.5.so)
+==18251==    by 0x4723FA: burn_stdio_write (write.c:1850)
+==18251==    by 0x4725DC: burn_stdio_mmc_write (write.c:1894)
+==18251==    by 0x483B7A: get_sector (sector.c:229)
+==18251==    by 0x484F11: sector_data (sector.c:639)
+==18251==    by 0x4729FE: burn_stdio_write_track (write.c:2012)
+==18251==    by 0x472CF4: burn_stdio_write_sync (write.c:2072)
+==18251==    by 0x472E8D: burn_disc_write_sync (write.c:2125) <<< we are here
+==18251==    by 0x460254: write_disc_worker_func (async.c:514)
+==18251==    by 0x506B09D: start_thread (in /lib64/libpthread-2.5.so)
+==18251==    by 0x55484CC: clone (in /lib64/libc-2.5.so)
+*/
+
 	d->rlba = -150;
 	d->toc_temp = 9;
 
@@ -2171,7 +2281,12 @@ return crap.  so we send the command, then ignore the result.
 				d->alba += 4500;
 			}
 		}
-		if (!burn_write_session(o, disc->session[i]))
+		multi_mem = o->multi;
+		if(i < disc->sessions - 1)
+			o->multi = 1;
+		ret = burn_write_session(o, disc->session[i]);
+		o->multi = multi_mem;
+		if (!ret)
 			goto fail;
 
 		lt = disc->session[i]->track[disc->session[i]->tracks - 1];
@@ -2229,6 +2344,8 @@ fail_wo_sync:;
 	d->busy = BURN_DRIVE_IDLE;
 ex:;
 	d->do_stream_recording = 0;
+	if (d->buffer != NULL)
+		free((char *) d->buffer);
 	d->buffer = buffer_mem;
 	return;
 }

test/libburner.c

@@ -1,6 +1,6 @@
 
 /* test/libburner.c , API illustration of burning data or audio tracks to CD */
-/* Copyright (C) 2005 - 2008 Thomas Schmitt <scdbackup@gmx.net> */
+/* Copyright (C) 2005 - 2009 Thomas Schmitt <scdbackup@gmx.net> */
 /* Provided under GPLv2,see also "License and copyright aspects" at file end */
 
 
@@ -106,7 +106,7 @@ int libburner_aquire_drive(char *drive_adr, int *driveno)
 		ret = libburner_aquire_by_adr(drive_adr);
 	else
 		ret = libburner_aquire_by_driveno(driveno);
-	if (ret <= 0)
+	if (ret <= 0 || *driveno <= 0)
 		return ret;
 	burn_disc_get_profile(drive_list[0].drive, &current_profile,
 				 current_profile_name);