Documented changes and release timestamp

Makefile.am

@@ -12,6 +12,9 @@ lib_LTLIBRARIES = libburn/libburn.la
 # Build libraries
 libburn_libburn_la_LDFLAGS = \
 	-version-info $(LT_CURRENT):$(LT_REVISION):$(LT_AGE)
+# This causes undesired .o names
+# configure.ac appends -D options to variable CFLAG
+### libburn_libburn_la_CFLAGS = $(LIBBURN_DVD_OBS_64K)
 libburn_libburn_la_LIBADD = $(LIBBURN_ARCH_LIBS) $(THREAD_LIBS)
 libburn_libburn_la_SOURCES = \
 	libburn/async.c \
@@ -25,13 +28,13 @@ libburn_libburn_la_SOURCES = \
 	libburn/debug.h \
 	libburn/drive.c \
 	libburn/drive.h \
+	libburn/ecma130ab.c \
+	libburn/ecma130ab.h \
 	libburn/error.h \
 	libburn/file.c \
 	libburn/file.h \
 	libburn/init.c \
 	libburn/init.h \
-	libburn/lec.c \
-	libburn/lec.h \
 	libburn/libburn.h \
 	libburn/libdax_audioxtr.h \
 	libburn/libdax_audioxtr.c \
@@ -107,9 +110,9 @@ test_structest_CPPFLAGS = -Ilibburn
 test_structest_LDADD = $(libburn_libburn_la_OBJECTS) $(LIBBURN_EXTRALIBS)
 test_structest_SOURCES = test/structest.c
 
-##  cdrskin construction site - ts A60816 - A90507
+##  cdrskin construction site - ts A60816 - A91206
 cdrskin_cdrskin_CPPFLAGS = -Ilibburn
-cdrskin_cdrskin_CFLAGS = -DCdrskin_libburn_0_6_7
+cdrskin_cdrskin_CFLAGS = -DCdrskin_libburn_0_7_4 
 
 # cdrskin_cdrskin_LDADD = $(libburn_libburn_la_OBJECTS) $(LIBBURN_EXTRALIBS)
 # ts A80123, change proposed by Simon Huggins to cause dynamic libburn linking

README

@@ -11,7 +11,7 @@ Still containing parts of Libburn. By Derek Foreman <derek@signalmarketing.com>
 and Ben Jansens <xor@orodu.net>
 Copyright (C) 2002-2006  Derek Foreman and Ben Jansens
 
-     http://files.libburnia-project.org/releases/libburn-0.6.6.pl00.tar.gz
+     http://files.libburnia-project.org/releases/libburn-0.7.4.pl00.tar.gz
 
 ------------------------------------------------------------------------------
 
@@ -19,10 +19,10 @@ Copyright (C) 2002-2006  Derek Foreman and Ben Jansens
 
                                 From tarball
 
-Obtain libburn-0.6.6.pl00.tar.gz, take it to a directory of your choice and do:
+Obtain libburn-0.7.4.pl00.tar.gz, take it to a directory of your choice and do:
 
-   tar xzf libburn-0.6.6.pl00.tar.gz
-   cd libburn-0.6.6
+   tar xzf libburn-0.7.4.pl00.tar.gz
+   cd libburn-0.7.4
    ./configure --prefix=/usr
    make
 
@@ -47,8 +47,8 @@ Our build system is based on autotools. For preparing the build of a SVN
 snapshot you will need autotools of at least version 1.7. 
 Do in a directory of your choice:
 
-   svn co http://svn.libburnia-project.org/libburn/trunk libburn-0.6.3
-   cd libburn-0.6.3
+   svn co http://svn.libburnia-project.org/libburn/trunk libburn-svn
+   cd libburn-svn
    ./bootstrap
    ./configure --prefix=/usr
    make
@@ -57,6 +57,26 @@ Do in a directory of your choice:
 Warning: The trunk might contain experimental features which might not
          persist until next release. 
 
+
+                        Special ./configure options
+
+In some situations Linux may deliver a better write performance to drives if
+the track input is read with O_DIRECT (see man 2 open). The API call
+burn_os_open_track_src() and the input readers of cdrskin and libburn fifo
+can be told to use this peculiar read mode by:
+   --enable-track-src-odirect
+
+But often libburn call burn_write_opts_set_dvd_obs(opts, 64*1024) will yield
+even better performance in such a situation. 64k can be made default at
+configure time by:
+    --enable-dvd-obs-64k
+This may be combined with above --enable-track-src-odirect .
+
+Make sure to re-compile all source files after running ./configure
+   make clean ; make
+   make install
+
+
 ------------------------------------------------------------------------------
 
 An important part of the project, libisofs, is hosted in a bzr repository at
@@ -137,7 +157,8 @@ The project components (list subject to growth, hopefully):
            Rock Ridge extensions. Manipulation is not only adding or
            overwriting of files but also deleting, renaming, attribute
            changing, incremental backups, activating boot images, and
-           extracting of files from ISO images to disk.
+           extracting of files from ISO images to disk. An own ISO 9660
+           extension stores ACLs, xattr, and MD5 of file content.
            See xorriso/README for more.
 
 - "test"   is a collection of application gestures and examples given by the
@@ -401,6 +422,59 @@ Project history as far as known to me:
 - 08 May 2009 libburn-0.6.6 fixes a bug with aborting on broken output pipe
   and a bug with device scan on FreeBSD.
 
+- 31 May 2009 libisofs-0.6.20 can record hard link relations in ISO images
+  and offers support with restoring them to disk. Current Linux kernels will
+  mount images with such hard links but will attribute a unique inode number
+  to each file.
+
+- 28 Jun 2009 libisoburn-0.4.0: xorriso can record and restore hard link
+  relations of files. Performance of data reading has been improved. Option
+  -find now supports logical operators with its tests.
+
+- 14 Jul 2009 libburn-0.6.8 fixes bugs and shortcommings with old MMC-1 drives
+  and with large SCSI bus numbers as handed out by Linux for USB drives.
+
+- 20 Jul 2009 libisoburn-0.4.0.pl01 fixes a regression in xorriso which caused
+  data loss in older sessions if xorriso was used underneath growisofs.
+  Affected are releases since libisoburn-0.3.2 in january 2009.
+
+- 25 Aug 2009 libisofs-0.6.22 can record MD5 checksums for the whole session
+  and for each single data file. Checksum tags allow to verify superblock and
+  directory tree before importing them.
+
+- 27 Aug 2009 libburn-0.7.0 allows to calm down a drive and to inquire its
+  supported profiles. It works around some pitfalls with U3 enhanced memory
+  sticks which emulate a CD-ROM.
+
+- 27 Aug 2009 libisoburn-0.4.0.pl00 can record MD5 checksums by which one may
+  verify the session or single data files in the image. When comparing image
+  files with files in the local filesystem, the MD5 sums avoid the need for
+  reading file content from the image.
+
+- 22 Sep 2009 libisoburn-0.4.0.pl01 fixes a bug in xorriso option -cut_out.
+
+- 08 Oct 2009 libisofs-0.6.24 fixes a bug which could cause the loss of blanks
+  in file names when a new session got added to an ISO image. With names
+  shorter than 251 characters this happened only to trailing blanks.
+
+- 08 Oct 2009 libisoburn-0.4.0.pl02 fixes bugs with xorriso option -for_backup,
+  with xorrisofs -help, and with xorrecord -help.
+
+- 12 Oct 2009 libburn-0.7.2 fixes a bug with CD TAO multi-track dummy sessions.
+  It can retrieve media product info and can process track input which was
+  prepared for CD-ROM XA Mode 2 Form 1. cdrskin now performs option -minfo.
+
+- 28 Oct 2009 libisoburn-0.4.4 fixes a bug with cdrecord emulation and
+  introduces new information options about media type and ISO image id strings.
+  On Linux it helps with mounting two sessions of the same media
+  simultaneously.
+
+- 12 Nov 2009 libburn-0.7.2.pl01 works around problems with Pioneer DVR-216D.
+  DVD-R runs made the drive stuck. Ejecting the tray did not work properly.
+
+- 06 Dec 2009 libburn-0.7.4 works around problems with newer DVD burners,
+  provides throughput enhancements with hampered busses on Linux, and new
+  API calls to log SCSI commands and to control the libburn fifo.
 
 ------------------------------------------------------------------------------
 

cdrskin/README

@@ -4,7 +4,8 @@
 cdrskin. By Thomas Schmitt <scdbackup@gmx.net>
 Integrated sub project of libburnia-project.org but also published via:
 http://scdbackup.sourceforge.net/cdrskin_eng.html
-http://scdbackup.sourceforge.net/cdrskin-0.6.7.tar.gz
+http://scdbackup.sourceforge.net/cdrskin-0.7.4.pl00.tar.gz
+
 Copyright (C) 2006-2009 Thomas Schmitt, provided under GPL version 2.
 ------------------------------------------------------------------------------
 
@@ -23,10 +24,10 @@ By using this software you agree to the disclaimer at the end of this text
 
                    Compilation, First Glimpse, Installation
 
-Obtain cdrskin-0.6.7.tar.gz, take it to a directory of your choice and do:
+Obtain cdrskin-0.7.4.pl00.tar.gz, take it to a directory of your choice and do:
 
-    tar xzf cdrskin-0.6.7.tar.gz
-    cd cdrskin-0.6.7
+    tar xzf cdrskin-0.7.4.pl00.tar.gz
+    cd cdrskin-0.7.4
 
 Within that directory execute:
 
@@ -34,8 +35,7 @@ Within that directory execute:
     make
 
 This will already produce a cdrskin binary. But it will be necessary to
-install libburn in order to use this binary. Installation of libburn is
-beyond the scope of cdrskin. For this, see included libburn docs.
+install libburn in order to use this binary.
 
 In order to surely get a standalone binary, execute
 
@@ -72,7 +72,7 @@ It is not necessary for the standalone cdrskin binary to have libburn
 installed, since it incorporates the necessary libburn parts at compile time.
 It will not collide with an installed version of libburn either.
 But libpthread must be installed on the system and glibc has to match. (See
-below for a way to create a statically linked binary.)
+below for a way to create a totally static linked binary.)
 
 To install the man page, you may do: echo $MANPATH and choose one of the
 listed directories to copy the man-page under its ./man1 directory. Like:
@@ -397,6 +397,21 @@ drive. See man page section FILES for a way to lift that ban.
 
                         Special compilation variations
 
+All following options of ./configure and cdrskin/compile_cdrskin.sh are
+combinable.
+
+In some situations Linux may deliver a better write performance to drives if
+the track input is read with O_DIRECT (see man 2 open). The API call
+burn_os_open_track_src() and the input readers of cdrskin and libburn fifo
+can be told to use this peculiar read mode by:
+   --enable-track-src-odirect
+
+But often cdrskin option dvd_obs=64k will yield even better performance in
+such a situation. 64k can be made default at compile time by 
+    cdrskin/compile_cdrskin.sh -dvd_obs_64k
+It can also be enabled at configure time by
+    ./configure ... --enable-dvd-obs-64k ...
+
 You may get a (super fat) statically linked binary by :
     cdrskin/compile_cdrskin.sh -static
 if your system supports static linking, at all. This will not help with kernels

cdrskin/add_ts_changes_to_libburn_0_7_4

@@ -38,7 +38,7 @@ original="./libburn_svn_release.tgz"
 # My changes are in $changes , mainly in $changes/cdrskin
 changes="./libburn-release"
 
-skin_release="0.6.6"
+skin_release="0.7.4"
 patch_level=".pl00"
 skin_rev="$skin_release""$patch_level"
 
@@ -117,6 +117,7 @@ cp -a "$cdrskin_dir" "$cdrskin_target"
 
 # Remove copied vim.swp and binaries
 rm "$cdrskin_target"/.*.swp
+rm "$cdrskin_target"/.*.swo
 rm "$cdrskin_target"/*.o
 rm "$cdrskin_target"/cdrfifo
 rm "$cdrskin_target"/cdrskin

cdrskin/add_ts_changes_to_libburn_0_7_5

@@ -38,7 +38,7 @@ original="./libburn_svn.tgz"
 # My changes are in $changes , mainly in $changes/cdrskin
 changes="./libburn-develop"
 
-skin_release="0.6.7"
+skin_release="0.7.5"
 patch_level=""
 skin_rev="$skin_release""$patch_level"
 
@@ -116,6 +116,7 @@ cp -a "$cdrskin_dir" "$cdrskin_target"
 
 # Remove copied vim.swp and binaries
 rm "$cdrskin_target"/.*.swp
+rm "$cdrskin_target"/.*.swo
 rm "$cdrskin_target"/*.o
 rm "$cdrskin_target"/cdrfifo
 rm "$cdrskin_target"/cdrskin

cdrskin/cdrfifo.c

@@ -25,6 +25,11 @@
 #include <sys/time.h>
 #include <sys/select.h>
 
+#ifndef Cdrfifo_standalonE
+/* <<< until release of 0.7.4 : for Libburn_has_open_trac_srC */
+#include "../libburn/libburn.h"
+#endif
+
 #include "cdrfifo.h"
 
 
@@ -120,7 +125,7 @@ struct CdrfifO {
                    struct burn_source object.
     @param chunk_size Size of buffer block for a single transaction (0=default)
     @param buffer_size Size of fifo buffer
-    @param flag Unused yet
+    @param flag bit0= Debugging verbosity
     @return 1 on success, <=0 on failure
 */
 int Cdrfifo_new(struct CdrfifO **ff, int source_fd, int dest_fd,
@@ -174,7 +179,13 @@ int Cdrfifo_new(struct CdrfifO **ff, int source_fd, int dest_fd,
  o->follow_up_fd_idx= -1;
  o->next= o->prev= NULL;
  o->chain_idx= 0;
+
+#ifdef Libburn_has_open_trac_srC
+ o->buffer= burn_os_alloc_buffer((size_t) buffer_size, 0);
+#else
  o->buffer= TSOB_FELD(char,buffer_size);
+#endif /* ! Libburn_has_open_trac_srC */
+
  if(o->buffer==NULL)
    goto failed;
  return(1);
@@ -226,8 +237,14 @@ int Cdrfifo_destroy(struct CdrfifO **ff, int flag)
 
  if(o->iso_fs_descr!=NULL)
    free((char *) o->iso_fs_descr);
+
  if(o->buffer!=NULL)
+#ifdef Libburn_has_open_trac_srC
+   burn_os_free_buffer(o->buffer, o->buffer_size, 0);
+#else
    free((char *) o->buffer);
+#endif /* Libburn_has_open_trac_srC */
+
  free((char *) o);
  (*ff)= NULL;
  return(1);
@@ -616,7 +633,7 @@ return: <0 = error , 0 = idle , 1 = did some work
 */
 {
  double buffer_space;
- int can_read,can_write,ret,did_work= 0,idx,sod,eop_is_near,eop_idx;
+ int can_read,can_write= 0,ret,did_work= 0,idx,sod,eop_is_near,eop_idx;
 
  buffer_space= Cdrfifo_tell_buffer_space(o,0);
  if(o->dest_fd>=0) if(FD_ISSET((o->dest_fd),wts)) {
@@ -659,6 +676,46 @@ return: <0 = error , 0 = idle , 1 = did some work
 after_write:;
  if(o->source_fd>=0) if(FD_ISSET((o->source_fd),rds)) {
    can_read= o->buffer_size - o->write_idx;
+
+#ifdef Libburn_has_open_trac_srC
+
+   /* ts A91115
+      This chunksize must be aligned to filesystem blocksize.
+    */
+#define Cdrfifo_o_direct_chunK 32768
+
+   if(o->write_idx < o->read_idx && o->write_idx + can_read > o->read_idx)
+     can_read= o->read_idx - o->write_idx;
+   if(o->fd_in_limit>=0.0)
+     if(can_read > o->fd_in_limit - o->fd_in_counter)
+       can_read= o->fd_in_limit - o->fd_in_counter;
+   /* Make sure to read with properly aligned size */
+   if(can_read > Cdrfifo_o_direct_chunK)
+     can_read= Cdrfifo_o_direct_chunK;
+   else if(can_read < Cdrfifo_o_direct_chunK)
+     can_read= -1;
+   ret= 0;
+   if(can_read>0)
+     ret= read(o->source_fd,o->buffer+o->write_idx,can_read);
+   if(can_read < 0) {
+     /* waiting for a full Cdrfifo_o_direct_chunK to fit */
+     if(can_write <= 0 && o->dest_fd >= 0) {
+        fd_set rds,wts,exs;
+        struct timeval wt;
+
+        FD_ZERO(&rds);
+        FD_ZERO(&wts);
+        FD_ZERO(&exs);
+        FD_SET((o->dest_fd),&wts);
+        wt.tv_sec=  0;
+        wt.tv_usec= 10000;
+        select(o->dest_fd + 1,&rds, &wts, &exs, &wt);
+
+     }
+   } else
+
+#else /* Libburn_has_open_trac_srC */
+
    if(can_read>o->chunk_size)
      can_read= o->chunk_size;
    if(o->write_idx<o->read_idx && o->write_idx+can_read > o->read_idx)
@@ -669,6 +726,9 @@ after_write:;
    ret= 0;
    if(can_read>0)
      ret= read(o->source_fd,o->buffer+o->write_idx,can_read);
+
+#endif /* ! Libburn_has_open_trac_srC */
+
    if(ret==-1) {
 
      /* >>> handle input error */;

cdrskin/cdrfifo.h

@@ -33,7 +33,7 @@ struct CdrfifO;
                    struct burn_source object.
     @param chunk_size Size of buffer block for a single transaction (0=default)
     @param buffer_size Size of fifo buffer
-    @param flag unused yet
+    @param flag bit0= Debugging verbosity
     @return 1 on success, <=0 on failure
 */
 int Cdrfifo_new(struct CdrfifO **ff, int source_fd, int dest_fd,

cdrskin/cdrskin.1

@@ -2,7 +2,7 @@
 .\" First parameter, NAME, should be all caps
 .\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
 .\" other parameters are allowed: see man(7), man(1)
-.TH CDRSKIN 1 "May 07, 2009"
+.TH CDRSKIN 1 "Nov 16, 2009"
 .\" Please adjust this date whenever revising the manpage.
 .\"
 .\" Some roff macros, for reference:
@@ -497,7 +497,15 @@ or DVD-R[W] in Disc-at-once mode.
 .TP
 .BI \-data
 Subsequent tracks are data tracks. This option is default and only needed
-to mark the end of the range of an eventual option -audio.
+to mark the end of the range of an eventual option -audio or -xa1.
+.br
+Options -mode2, -xa, and -xa2 get mapped to -data, not using the desired CD
+sector formats and thus not taking advantage of eventual higher payload.
+.BI \-xa1
+Subsequent tracks are data tracks with input suitable for CD-ROM XA mode 2
+form 1. This differs from -data input by 8 additional header bytes per block.
+cdrskin will not write CD-ROM XA but rather strip the header bytes and write as
+-data tracks.
 .TP
 .BI dev= target
 Set the address of the drive to use. Valid are at least the
@@ -616,6 +624,10 @@ modesty_on_drive=1:min_percent=<percentage>:max_percent=95
 .br
 Percentage is permissible between 25 and 95.
 .TP
+.BI -minfo
+Print information about the loaded media. This includes media type, writability
+state, and a quite readable table of content.
+.TP
 .BI msifile= path
 Run option -msinfo and copy the result line into the file given by path.
 Unlike -msinfo this option does not redirect all normal output away from
@@ -679,13 +691,6 @@ Add the given amount of trailing zeros to the next data track. This option
 gets reset to padsize=0 after that next track is written. It may be set
 again before the next track argument. About size specifiers, see option fs=.
 .TP
-.BI \-raw96r
-Write CD in RAW/RAW96R mode. This mode allows to put more payload bytes
-into a CD sector but obviously at the cost of error correction. It can only
-be used for tracks of fixely predicted size. Some drives allow this mode but
-then behave strange or even go bad for the next few attempts to burn a CD.
-One should use it only if inavoidable.
-.TP
 .BI \-sao
 Write CD in Session At Once mode or sequential DVD-R[W] in Disc-at-once
 (DAO) mode.
@@ -791,6 +796,11 @@ Level 2 additionally reports about option settings derived from arguments or
 startup files. Level 3 is for debugging and useful mainly in conjunction with
 somebody who had a look into the program sourcecode.
 .TP
+.BI \-V
+Enable logging of SCSI commands to stderr. This allows expert examination
+of the interaction between libburn and the drive. The commands are specified
+in SCSI-3 standards SPC, SBC, MMC.
+.TP
 .BI \-waiti
 Wait until input data is available at stdin or EOF occurs at stdin.
 Only then begin to access any drives.
@@ -889,6 +899,14 @@ Both, write_start_address and direct_write_amount size must be aligned to a
 media dependend transaction size. With DVD-RAM, BD-RE, DVD+RW this is 2k, with
 overwriteable DVD-RW it is 32k.
 .TP
+.BI dvd_obs= default|32k|64k
+Linux specific:
+Set the number of bytes to be transmitted with each write operation to DVD
+or BD media. Tracks get padded up to the next multiple of this write
+size. A number of 64 KB may improve throughput with bus systems which
+show latency problems. The default depends on media type, option
+stream_recording=, and on compile time options.
+.TP
 .BI fallback_program= command
 Set a command name to be executed if cdrskin encounters a known cdrecord
 option which it does not yet support. If a non-empty command is given with
@@ -981,6 +999,10 @@ List all ignored cdrecord options. The "-" options cannot be used as addresses
 of track sources. No track source address may begin with a text equal to an
 option which ends by "=". The list is ended by an empty line.
 .TP
+.BI \--long_toc
+Like option -toc but marking each session start by a line "first: X last: Y"
+and each session end by "track:lout ...".
+.TP
 .BI \--no_rc
 Only if used as first command line argument this option prevents reading and
 interpretation of eventual startup files. See section FILES below.
@@ -999,6 +1021,22 @@ which can only do DAO but not Incremental Streaming.
 .BI \--single_track
 Accept only the last argument of the command line as track source address.
 .TP
+.BI stdio_sync= on|off|number
+Set the number of bytes after which to force output to drives with prefix
+"stdio:". This forcing keeps the memory from being clogged with lots of
+pending data for slow devices. Default "on" is the same as "16m".
+Forced output can be disabled by "off".
+.TP
+.BI stream_recording= on|off|number
+By setting "on" request that compliance to the desired speed setting is
+preferred over management of write errors. With DVD-RAM and BD this can
+bring effective write speed near to the nominal write speed of the media.
+But it will also disable the automatic use of replacement blocks
+if write errors occur. It might as well be disliked or ignored by the drive.
+.br
+If a number is given, then error management stays enabled for all byte
+addresses below that number. Any number below 16s is the same as "off".
+.TP 
 .BI tao_to_sao_tsize= size
 Set an exact fixed size for the next track to be in effect only if the track
 source cannot deliver a size prediction and no tsize= was specified and an
@@ -1185,16 +1223,9 @@ Linux specific:
 Use and report literal Bus,Target,Lun addresses rather than real SCSI and
 pseudo ATA addresses. This method is outdated and was never compatible with
 original cdrecord.
-.TP
-.BI stream_recording="on"|"off"|number
-By setting "on" request that compliance to the desired speed setting is
-preferred over management of write errors. With DVD-RAM and BD this can
-bring effective write speed near to the nominal write speed of the media.
-But it will also disable the automatic use of replacement blocks
-if write errors occur. It might as well be disliked or ignored by the drive.
-.br
-If a number is given, then error management stays enabled for all byte
-addresses below that number. Any number below 16s is the same as "off".
+.BI --xa1-ignore
+Silently interpret option -xa1 as -data. This may be necessary if a frontent
+does not prepare -xa1 block headers but insists in using option -xa1.
 .SH EXAMPLES
 .SS
 .B Get an overview of drives and their addresses:

cdrskin/cdrskin_eng.html

@@ -34,10 +34,12 @@ CD-R, DVD-R, DVD+R, DVD+R/DL, BD-R, CD-RW, DVD-RW, DVD-RAM, DVD+RW, BD-RE
 
 <P>
 <H2>Hardware requirements:</H2>
-A CD/DVD/BD recorder suitable for 
-<A HREF="http://libburnia-project.org">http://libburnia-project.org</A> <BR>
-(SCSI , ATA , USB , or SATA writers compliant to standard MMC-3 for CD
-and to MMC-5 for DVD or BD).
+About any CD, DVD, or BD recorder produced in the recent ten years.
+<BR>
+<A HREF="http://libburnia-project.org">libburn</A>
+supports recorders which are compliant to standards MMC-1 for CD and
+MMC-5 for DVD or BD. Linux and FreeBSD allow to access drives connected
+via SCSI, PATA (aka IDE, ATA), USB, or SATA.
 <BR>
 </P>
 
@@ -59,7 +61,7 @@ and to MMC-5 for DVD or BD).
 GPL software included:<BR>
 </H2>
 <DL>
-<DT>libburn-0.6.6</DT>
+<DT>libburn-0.7.4</DT>
 <DD>(founded by Derek Foreman and Ben Jansens,
 developed and maintained since August 2006 by
 Thomas Schmitt from team of libburnia-project.org)
@@ -109,7 +111,7 @@ as listed by option --devices.</DT>
 <DT>Get info about a particular drive or loaded media:</DT>
 <DD>$<KBD>&nbsp;cdrskin dev=0,1,0 -checkdrive</KBD></DD>
 <DD>$<KBD>&nbsp;cdrskin dev=ATA:1,0,0 -v -atip</KBD></DD>
-<DD>$<KBD>&nbsp;cdrskin dev=/dev/hdc -toc</KBD></DD>
+<DD>$<KBD>&nbsp;cdrskin dev=/dev/hdc -minfo</KBD></DD>
 
 <DT>Prepare CD-RW or DVD-RW for re-use, DVD-RAM or BD-RE for first use:</DT>
 <DD>$<KBD>&nbsp;cdrskin -v dev=/dev/sg1 blank=as_needed -eject</KBD></DD>
@@ -191,8 +193,8 @@ Standalone ISO 9660 multi-session CD/DVD/BD tool
 <P>
 <DL>
 <DT>Download as source code (see README):</DT>
-<DD><A HREF="cdrskin-0.6.6.pl00.tar.gz">cdrskin-0.6.6.pl00.tar.gz</A>
-(750 KB).
+<DD><A HREF="cdrskin-0.7.4.pl00.tar.gz">cdrskin-0.7.4.pl00.tar.gz</A>
+(810 KB).
 </DD>
 <DD>
 The cdrskin tarballs are source code identical with libburn releases
@@ -241,20 +243,24 @@ cdrskin_0.4.2.pl00-x86-suse9_0-static.tar.gz</A>, (310 KB), -static compiled,
 <HR>
 
 <P>
-Enhancements towards previous stable version cdrskin-0.6.4.pl00:
+Enhancements towards previous stable version cdrskin-0.7.0.pl00:
 <UL>
-<LI>none</LI>
+<LI>Implemented option -V for logging of SCSI commands</LI>
+<LI>New options dvd_obs= and stdio_fsync=</LI>
+<LI>New ./configure options --enable-track-src-odirect, --enable-dvd-obs-64k
+</LI>
+<LI>New compile_cdrskin.sh option -dvd_obs_64k</LI>
 <!--
 <LI>none</LI>
 -->
 </UL>
 
-Bug fixes towards cdrskin-0.6.4.pl00:
+Bug fixes towards cdrskin-0.7.2.pl00:
 <UL>
-<LI>Improper abort handling with broken pipe during output to
-a stdio: pseudo-drive
-</LI>
-<LI>Device scan stalled on FreeBSD with non-burner USB device</LI>
+<LI>Workaround for Pioneer DVR-216D which got stuck on DVD-R burns.</LI>
+<LI>Workaround for Pioneer DVR-216D which did not always eject the tray.</LI>
+<LI>DVD DAO track size was rounded up much too generously</LI>
+<LI>SIGSEGV from NULL pointer with media product id inquiry on LG GH22LS30</LI>
 <!--
 <LI>none</LI>
 -->
@@ -264,8 +270,8 @@ a stdio: pseudo-drive
 
 <P>
 <DL>
-<DT><H3>Development snapshot, version 0.6.7 :</H3></DT>
-<DD>Enhancements towards current stable version 0.6.6.pl00:
+<DT><H3>Development snapshot, version 0.7.5 :</H3></DT>
+<DD>Enhancements towards current stable version 0.7.4.pl00:
 <UL>
 <LI>none yet</LI>
 <!--
@@ -274,7 +280,7 @@ a stdio: pseudo-drive
 </UL>
 </DD>
 
-<DD>Bug fixes towards cdrskin-0.6.6.pl00:
+<DD>Bug fixes towards cdrskin-0.7.4.pl00:
 <UL>
 <LI>none yet</LI>
 <!--
@@ -283,10 +289,10 @@ a stdio: pseudo-drive
 </DD>
 
 <DD>&nbsp;</DD>
-<DD><A HREF="README_cdrskin_devel">README 0.6.7</A>
-<DD><A HREF="cdrskin__help_devel">cdrskin_0.6.7 --help</A></DD>
-<DD><A HREF="cdrskin_help_devel">cdrskin_0.6.7 -help</A></DD>
-<DD><A HREF="man_1_cdrskin_devel.html">man cdrskin (as of 0.6.7)</A></DD>
+<DD><A HREF="README_cdrskin_devel">README 0.7.5</A>
+<DD><A HREF="cdrskin__help_devel">cdrskin_0.7.5 --help</A></DD>
+<DD><A HREF="cdrskin_help_devel">cdrskin_0.7.5 -help</A></DD>
+<DD><A HREF="man_1_cdrskin_devel.html">man cdrskin (as of 0.7.5)</A></DD>
 <DD>&nbsp;</DD>
 <DT>Maintainers of cdrskin unstable packages please use SVN of
 <A HREF="http://libburnia-project.org"> libburnia-project.org</A></DT>
@@ -306,8 +312,8 @@ admins with full system souvereignty.</DT>
 <A HREF="README_cdrskin_devel">upcoming README</A> ):
 </DD>
 <DD>
-<A HREF="cdrskin-0.6.7.tar.gz">cdrskin-0.6.7.tar.gz</A>
-(750 KB).
+<A HREF="cdrskin-0.7.5.tar.gz">cdrskin-0.7.5.tar.gz</A>
+(810 KB).
 </DD>
 
 <!-- This is not offered any more since spring 2008

cdrskin/cdrskin_timestamp.h

@@ -1 +1 @@
-#define Cdrskin_timestamP "2009.07.07.191134"
+#define Cdrskin_timestamP "2009.12.06.160001"

cdrskin/changelog.txt

@@ -1761,6 +1761,17 @@ Version leap to 0.2.6
 Published cdrskin-0.2.6.pl01 on cdrskin home pages
 
 ------------------------------- cycle  - cdrskin-0.2.6.pl01 - 2006.11.23.114611
+* Enabled TAO
+* Bug fixed: Trailing trash appended to .wav files caused error message
+  and, if exceeding fifo size, could even stall a burn.
+* Multi-session CDs (for now restricted to write mode TAO), -multi, -msinfo
+* Bug fixed: False speed with first pacifier cycle. Potential SIGFPE by NaN.
+* Enabled named pipes and other non-plain file types as track sources
+  (actually already in previous cycle)
+* Bug fixed: Default speed was not highest possible but announced as "MAX"
+* SAO is preferred default write mode, TAO is default when needed
+* libisofs unbundled from libburn+cdrskin
+* Hints for porting to other operating systems are now in sg-*.c
 
 
 2006.11.24.121745  [437]
@@ -6634,15 +6645,954 @@ Made number transition and activated development documentation
 - cdrskin/add_ts_changes_to_libburn_0_6_5
 + cdrskin/add_ts_changes_to_libburn_0_6_6
 + cdrskin/add_ts_changes_to_libburn_0_6_7
+Updated cdrskin tarball generator
+
+7 May 2009  [2636]
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+------------------------------------ cycle  - cdrskin-0.6.7 - 2009.05.07.181034
+
+8 May 2009  [2637]
+svn move -m libburn release 0.6.6 is ready
+http://svn.libburnia-project.org/libburn/branches/ZeroSixSix
+http://svn.libburnia-project.org/libburn/tags/ZeroSixSix
+
+2009.05.17.144304  [2645]
+cdrskin/cdrskin.c
+Made -scanbus work with SCSI bus numbers like 85 (USB, kernel 2.6.18.2)
+
+2009.06.02.162841  [2655]
+libburn/drive.c
+libburn/async.c
+libburn/options.c
+libburn/spc.c
+libburn/libdax_msgs.h
+Rectified use of burn_drive.mdata->valid
+
+2 Jun 2009  [2656]
+test/libburner.c
+Avoided SIGSEGV if no drives were found by scan
+
+2009.06.02.172201  [2657]
+libburn/drive.c
+Avoided to enumerate faulty drive objects
+
+2009.06.03.085637 [2658]
+libburn/spc.c
+Bug fix: Old MMC-1 drives were rejected because of mode page 2Ah length
+
+2009.06.03.185118  [2659]
+libburn/transport.h
+libburn/drive.c
+libburn/spc.c
+libburn/mmc.c
+Bug fix: No usable media was detected with old MMC-1 drives
+
+2009.06.14.095004  [2669]
+libburn/sg-linux.c
+Retrying 3 times on EBUSY drives with generous usleep intervals
+
+------------------------------------ cycle  - cdrskin-0.6.7 - 2009.06.14.095833
+Made -scanbus work with high SCSI bus numbers
+Bug fix: Old MMC-1 drives were rejected because of mode page 2Ah length
+Bug fix: No usable media was detected with old MMC-1 drives
+
+
+7 Jul 2009  [2691]
+acinclude.m4
+configure.ac
+configure options --enable-libdir-pkgconfig and --enable-pkgconfig-path=DIR
+
+2009.07.07.191134  [2692]
+Timestamp for revision 2691
+
+14 Jul 2009 [2894]
+svn copy -m "Branching for libburn release 0.6.8"
+      http://svn.libburnia-project.org/libburn/trunk
+      http://svn.libburnia-project.org/libburn/branches/ZeroSixEight
+
+2009.07.14.100001  [2695]
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+Made number transition and activated development documentation
+
+14 Jul 2009  [2696]
+- cdrskin/add_ts_changes_to_libburn_0_6_6
+- cdrskin/add_ts_changes_to_libburn_0_6_7
++ cdrskin/add_ts_changes_to_libburn_0_6_8
++ cdrskin/add_ts_changes_to_libburn_0_6_9
+Updated cdrskin tarball generator
+
+14 Jul 2009  [2697]
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+------------------------------ release - cdrskin-0.6.8.pl00 - 2009.07.14.100001
+Made -scanbus work with high SCSI bus numbers
+Bug fix: Old MMC-1 drives were rejected because of mode page 2Ah length
+Bug fix: No usable media was detected with old MMC-1 drives
+
+
+2009.07.14.133159  [2698]
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+Made number transition and activated development documentation
+
+14 Jul 2009  [2699]
+- cdrskin/add_ts_changes_to_libburn_0_6_6
+- cdrskin/add_ts_changes_to_libburn_0_6_7
++ cdrskin/add_ts_changes_to_libburn_0_6_8
++ cdrskin/add_ts_changes_to_libburn_0_6_9
+Updated cdrskin tarball generator
+
+14 Jul 2009  [2700]
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+------------------------------------ cycle  - cdrskin-0.6.9 - 2009.07.14.133159
+
+14 Jul 2009  [2702]
+svn move -m libburn release 0.6.8 is ready
+http://svn.libburnia-project.org/libburn/branches/ZeroSixEight
+http://svn.libburnia-project.org/libburn/tags/ZeroSixEight
+
+
+2009.08.15.133055  [2721]
+libburn/write.c
+Added test code about output blocks size as comment.
+
+2009.08.15.133332  [2722]
+libburn/libburn.h
+libburn/transport.h
+libburn/drive.c
+libburn/mmc.h
+libburn/mmc.c
+New API calls burn_drive_get_all_profiles(), burn_obtain_profile_name()
+
+2009.08.15.133744  [2723]
+cdrskin/cdrskin.c
+Listing all profiles with cdrskin -v -atip
+
+2009.08.23.130326  [2735]
+libburn/drive.c
+libburn/spc.c
+libburn/mmc.c
+Adapted to pitfalls of U3 memory sticks which appear as CD-ROM drives
+
+------------------------------------ cycle  - cdrskin-0.6.9 - 2009.08.23.132942
+New API calls burn_drive_get_all_profiles(), burn_obtain_profile_name()
+Adapted to pitfalls of U3 memory sticks which appear as CD-ROM drives
+
+
+2009.08.24.131146  [2736]
+libburn/libburn.h
+libburn/transport.h
+libburn/drive.c
+libburn/sbc.c
+New API call burn_drive_snooze()
+
+2009.08.24.161646  [2737]
+libburn/libburn.h
+libburn/drive.c
+Made burn_drive_snooze() safe for emulated drives
+
+2009.08.24.202517  [2740]
+libburn/transport.h
+libburn/sbc.c
+libburn/mmc.c
+Implemented automatic START UNIT after STOP UNIT before any other SCSI command
+
+2009.08.27.123001  [2746]
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+Made number transition and activated development documentation
+
+27 Aug 2009  [2747]
+- cdrskin/add_ts_changes_to_libburn_0_6_8
+- cdrskin/add_ts_changes_to_libburn_0_6_9
++ cdrskin/add_ts_changes_to_libburn_0_7_0
++ cdrskin/add_ts_changes_to_libburn_0_7_1
+Updated cdrskin tarball generator
+
+27 Aug 2009  [2748]
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+------------------------------ release - cdrskin-0.7.0.pl00 - 2009.08.27.123001
+New API calls burn_drive_get_all_profiles(), burn_obtain_profile_name()
+New API call burn_drive_snooze()
+Adapted to pitfalls of U3 memory sticks which appear as CD-ROM drives
+Listing all supported profiles with option -atip
+
+
+2009.08.27.143351  [2749]
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+Made number transition to development version 0.7.1
+
+27 Aug 2009  [2750]
+- cdrskin/add_ts_changes_to_libburn_0_6_8
+- cdrskin/add_ts_changes_to_libburn_0_6_9
++ cdrskin/add_ts_changes_to_libburn_0_7_0
++ cdrskin/add_ts_changes_to_libburn_0_7_1
+Updated cdrskin tarball generator
+
+27 Aug 2009  [2751]
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+------------------------------------ cycle  - cdrskin-0.7.1 - 2009.08.27.143351
+
+2009.09.01.082602  [2773]
+cdrskin/cdrskin.c
+cdrskin/cdrskin.1
+Disabled write mode -raw96r
+
+2009.09.01.095750  [2774] [2775]
+libburn/libburn.h
+libburn/sector.h
+libburn/sector.c
+libburn/lec.h
+libburn/lec.c
+libburn/read.c
+libburn/write.c
+Disabled code using libburn/lec.c
+
+2009.09.01.113957  [2777]
+cdrskin/cdrskin.c
+Aligned the output columns of cdrskin --devices
+
+2009.09.01.133520  [2778]
+cdrskin/cdrskin.c
+cdrskin/cdrskin.1
+New option --long_toc, now printing media summary at end of TOC
+
+2009.09.02.131514  [2779]
+Makefile.am
+libburn/sector.c
+- libburn/lec.h
+- libburn/lec.c
+cdrskin/compile_cdrskin.sh
+Removed lec.c from libburn
+
+2009.09.02.133307  [2780]
+libburn/libburn.h
+libburn/util.c
++ doc/mediainfo.txt
+cdrskin/cdrskin.c
+New API call burn_guess_cd_manufacturer()
+
+2009.09.04.202255  [2781]
+libburn/libburn.h
+libburn/drive.c
+libburn/util.c
+libburn/spc.c
+libburn/mmc.h
+libburn/mmc.c
+New API calls burn_get_media_product_id() and burn_guess_manufacturer()
+
+2009.09.04.202357  [2782]
+cdrskin/cdrskin.c
+Option -atip now reports Product Id and Manufacturer for most CD, DVD, BD types
+
+4 Sep 2009  [2783]
+doc/mediainfo.txt
+Updated media info documentation
+
+2009.09.04.204432  [2784]
+cdrskin/cdrskin.c
+Adjusted column width of media info messages
+
+2009.09.05.072512  [2785]
+cdrskin/cdrskin.c
+Adjusted column width of media summary message
+
+------------------------------------ cycle  - cdrskin-0.7.1 - 2009.09.05.072659
+* New option --long_toc, now printing media summary at end of TOC
+* New API call burn_guess_cd_manufacturer()
+* New API calls burn_get_media_product_id() and burn_guess_manufacturer()
+
+
+2009.09.05.113043  [2786]
+libburn/util.h
+libburn/util.c
+libburn/mmc.c
+Made product ID surely a single printable word
+
+2009.09.05.114326  [2787]
+libburn/sg-linux.c
+Silenced a valgrind warning caused by not recognizing side effects of a ioctl
+
+2009.09.05.115112  [2788]
+cdrskin/cdrskin.c
+Closed a small memory leak with drive inquiry
+
+2009.09.05.120947  [2789]
+cdrskin/cdrskin.c
+Made cdrskin/compile_cdrskin.sh -libburn_0_7_0 work again
+
+------------------------------------ cycle  - cdrskin-0.7.1 - 2009.09.05.121334
+
+2009.09.05.131859  [2790]
+cdrskin/cdrskin.c
+Re-enabled output of product id and manufacturer
+
+------------------------------------ cycle  - cdrskin-0.7.1 - 2009.09.05.132208
+
+2009.09.05.165127  [2791]
+libburn/libburn.h
+libburn/drive.c
+libburn/util.c
+libburn/mmc.c
+Introduced flag bit0 for API call burn_get_media_product_id()
+
+2009.09.05.165257  [2792]
+cdrskin/cdrskin.c
+"Manufacturer:", "Media type:" as cdrecord, own "Product Id:" and "Producer:"
+
+------------------------------------ cycle  - cdrskin-0.7.1 - 2009.09.05.172818
+* New -atip report lines "Product Id:" and "Producer:"
+
+
+2009.09.06.092330  [2793]
+libburn/util.c
+Made recognition of CD media codes work in burn_guess_manufacturer()
+
+2009.09.06.092654  [2794]
+libburn/libburn.h
+libburn/drive.c
+cdrskin/cdrskin.c
+Changed new API call burn_get_media_product_id() to burn_disc_get_media_id()
+
+06 Sep 2009  [2795]
+doc/mediainfo.txt
+Corrected misformatted manufacturer strings of DVD- media
+
+2009.09.06.112121  [2796]
+libburn/mmc.c
+doc/mediainfo.txt
+Avoided to read third sixpack of manufacturer bytes with DVD-R media
+
+------------------------------------ cycle  - cdrskin-0.7.1 - 2009.09.06.115138
+
+2009.09.09.125305  [2801]
+libburn/libburn.h
+libburn/transport.h
+libburn/drive.c
+libburn/mmc.c
+New API call burn_disc_get_cd_info()
+
+2009.09.09.134030  [2802]
+libburn/transport.h
+libburn/drive.c
+libburn/mmc.c
+Correction with erasable bit of burn_disc_get_cd_info()
+
+2009.09.09.153951  [2803]
+libburn/libburn.h
+libburn/mmc.c
+New struct burn_toc_entry extension for Last Recorded Address
+
+2009.09.09.173452  [2804]
+cdrskin/cdrskin.c
+cdrskin/cdrskin.1
+Emulation of some -minfo output
+
+2009.09.09.174337  [2805]
+cdrskin/cdrskin.c
+Silenced compiler warning
+
+------------------------------------ cycle  - cdrskin-0.7.1 - 2009.09.09.174446
+* New API call burn_disc_get_cd_info()
+* Emulation of some -minfo output
+
+
+2009.09.10.071253  [2806]
+cdrskin/cdrskin.c
+Removed Media summary from -minfo because of incompatible counting rules
+
+------------------------------------ cycle  - cdrskin-0.7.1 - 2009.09.10.084912
+
+
+2009.09.11.112528  [2807]
+libburn/libburn.h
+libburn/transport.h
+libburn/structure.h
+libburn/structure.c
+libburn/sector.c
+New API call burn_track_set_cdxa_conv()
+
+2009.09.11.120959  [2808]
+cdrskin/cdrskin.c
+cdrskin/cdrskin.1
+Interpreting options -mode2, -xa, -xa1, -xa2 but producing CD-ROM Mode 1 tracks
+
+12 Sep 2009  [2809]
+cdrskin/cdrskin_eng.html
+Updated cdrskin web page
+
+------------------------------------ cycle  - cdrskin-0.7.1 - 2009.09.12.134510
+* New API call burn_track_set_cdxa_conv()
+* Better interpretation of options -mode2, -xa, -xa1, -xa2
+* New option --xa1-ignore
+
+
+2009.09.13.095055  [2810]
+libburn/drive.c
+Evaluating read capacity with role 2 drives (regular files and block devices)
+
+2009.09.18.161214  [2815]
+libburn/sector.c
+Fixing SIGSEGV with CD SAO introduced with revision 2807
+
+2009.09.18.161944  [2816]
+libburn/read.c
+libburn/libdax_msgs.h
+Refusing to read beyond media_read_capacity
+
+------------------------------------ cycle  - cdrskin-0.7.1 - 2009.09.18.164446
+
+
+2009.09.20.111911  [2820]
+libburn/libburn.h
+Mentioned need for 2056 byte fifo chunks with burn_track_set_cdxa_conv()
+
+2009.09.22.192545  [2822]
+libburn/sbc.c
+Revoked instruction to retry STOP UNIT
+
+2009.09.22.192802  [2823]
+libburn/sg-linux.c
+Restricted retry to the timeout for single SCSI commands (200 seconds) 
+
+2009.10.04.151239  [2830]
+libburn/write.c
+libburn/libdax_msgs.h
+Fixed CD TAO multi-track -dummy bug reported by Philippe Rouquier
+
+------------------------------------ cycle  - cdrskin-0.7.1 - 2009.10.08.174136
+* Bug fix: CD TAO sessions with multiple tracks did not work in -dummy mode
+
+
+2009.10.09.123651  [2847]
+libburn/mmc.c
+Determining read capacity for DVD-RAM
+
+2009.10.09.123840  [2848]
+cdrskin/cdrskin.c
+Made -minfo stupidly report overwriteable media as "erasable" and "complete"
+
+2009.10.09.200411  [2849]
+libburn/read.c
+Made read_capacity error message of burn_read_data() depending on flag bit1
+
+2009.10.09.200730  [2850]
+cdrskin/cdrskin.c
+Made -minfo subtract 2 from track size if "Data" and last 2 blocks unreadable
+
+12 Oct 2009  [2854]
+svn copy -m "Branching for libburn release 0.7.2" \
+    http://svn.libburnia-project.org/libburn/trunk \
+    http://svn.libburnia-project.org/libburn/branches/ZeroSevenTwo
+
+2009.10.12.080001  [2855]
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+Made number transition and activated development documentation
+
+12 Oct 2009  [2856]
+- cdrskin/add_ts_changes_to_libburn_0_7_0
+- cdrskin/add_ts_changes_to_libburn_0_7_1
++ cdrskin/add_ts_changes_to_libburn_0_7_2
++ cdrskin/add_ts_changes_to_libburn_0_7_3
+Updated cdrskin tarball generator
+
+12 Oct 2009  [2867]
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+------------------------------ release - cdrskin-0.7.2.pl00 - 2009.10.12.080001
+* Bug fix: CD TAO sessions with multiple tracks did not work in -dummy mode
+* Better interpretation of options -mode2, -xa, -xa1, -xa2
+* New option --xa1-ignore
+* Emulation of some -minfo output
+* New -atip report lines "Product Id:" and "Producer:"
+* New API call burn_guess_cd_manufacturer()
+* New API calls burn_get_media_product_id() and burn_guess_manufacturer()
+* New API call burn_disc_get_cd_info()
+* New API call burn_track_set_cdxa_conv()
+
+
+2009.10.12.103503  [2858]
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+Made number transition to 0.7.3
+
+12 Oct 2009  [2859]
+- cdrskin/add_ts_changes_to_libburn_0_7_0
+- cdrskin/add_ts_changes_to_libburn_0_7_1
++ cdrskin/add_ts_changes_to_libburn_0_7_2
++ cdrskin/add_ts_changes_to_libburn_0_7_3
+Updated cdrskin tarball generator
+
+12 Oct 2009  [2860]
+cdrskin/changelog.txt
+Documented changes and release timestamp
+
+12 Oct 2009  [2861]
+svn move -m "libburn release 0.7.2 is ready" \
+    http://svn.libburnia-project.org/libburn/branches/ZeroSevenTwo \
+    http://svn.libburnia-project.org/libburn/tags/ZeroSevenTwo
+
+------------------------------------ cycle  - cdrskin-0.7.3 - 2009.10.12.105750
+
+
+2009.10.17.131852  [2865] [2864]
+Makefile.am
+libburn/libburn.h
+libburn/sector.c
++ libburn/ecma130ab.h
++ libburn/ecma130ab.c
+cdrskin/compile_cdrskin.sh
+Re-implemented ECMA-130 P-parity, Q-parity and scrambling for BURN_WRITE_RAW
+
+------------------------------------ cycle  - cdrskin-0.7.3 - 
+* Re-implemented ECMA-130 P-parity, Q-parity and scrambling for BURN_WRITE_RAW
+
+
+2009.10.19.115722  [2867]
+libburn/ecma130ab.c
+Optimizations with parity computation, clarification about nature of logarithms
+
+2009.10.20.160131  [2868]
+libburn/libburn.h
+libburn/ecma130ab.c
+More optimizations with parity computation
+
+------------------------------------ cycle  - cdrskin-0.7.3 - 2009.10.20.160131
+
+
+2009.10.27.100637  [2871]
+libburn/mmc.c
+Bug fix: burn_drive->disc_id or burn_drive->disc_app_code altered by stray 0. Thanks to George Danchev.
+
+2009.10.27.101031  [2872]
+libburn/sg-freebsd.c
+Bug fix: Closed memory leak with failure to open device file under FreeBSD. Thanks to George Danchev.
+
+2009.10.30.134640  [2880]
+libburn/libburn.h
+libburn/spc.c
+libburn/mmc.c
+libburn/sg-linux.c
+Test macros for finding reason of stall problem with Pioneer DVD-216D on DVD-R
+
+------------------------------------ cycle  - cdrskin-0.7.3 - 2009.10.30.134640
+
+
+2009.11.03.184626  [2881]
+libburn/libburn.h
+libburn/mmc.c
+Test macro for SL_V in mode page 05
+
+2009.11.04.084506  [2882]
+libburn/libburn.h
+libburn/write.c
+Test macro for SEND OPC INFORMATION before DVD-R track
+
+2009.11.05.170409  [2883]
+libburn/libburn.h
+libburn/transport.h
+libburn/write.c
+libburn/sbc.c
+libburn/mmc.c
+Test macros for double START UNIT and SET CD SPEED
+
+2009.11.08.120917  [2884]
+libburn/mmc.c
+Corrected allocation length with GET CONFIGURATION
+
+2009.11.08.121334  [2885]
+libburn/spc.h
+libburn/spc.c
+libburn/mmc.h
+libburn/sg-linux.c
+Made SCSI command log more complete and more readable
+
+2009.11.10.132154  [2886]
+libburn/mmc.c
+Avoiding START UNIT before the drive gets released
+
+2009.11.10.203412  [2887]
+libburn/libburn.h
+libburn/write.c
+libburn/spc.c
+libburn/sbc.c
+libburn/mmc.c
+libburn/sg-linux.c
+Hopefully solved the endless burn problem with Pioneer DVR-216D
+
+2009.11.11.100714  [2888]
+libburn/write.c
+Increased stdio flush interval from 1 MB to 16 MB
+
+2009.11.11.100822  [2889]
+cdrskin/cdrskin.c
+Reporting number of pending bytes while thanking for patience in -vvv mode
+
+2009.11.11.105028  [2890]
+cdrskin/cdrskin.c
+Silenced a compiler warning about potentially uninitialized variable
+
+------------------------------------ cycle  - cdrskin-0.7.3 - 2009.11.11.105159
+* Workaround for Pioneer DVR-216D which got stuck on DVD-R burns
+
+
+11 Nov 2009  [2891]
+cdrskin/cdrskin_eng.html
+Updated cdrskin home page about DVR-216D workaround
+
+2009.11.12.175514  [2892]
+libburn/libburn.h
+libburn/init.c
+libburn/write.c
+libburn/sg-linux.c
+Made SCSI logger permanent and controllable via API call
+
+2009.11.12.175735  [2893]
+libburn/spc.c
+libburn/sbc.c
+libburn/mmc.c
+Workaround for Pioneer DVR-216D refusal to eject
+
+2009.11.12.180048  [2894]
+libburn/drive.c
+Macro Libburn_pioneer_dvr_216d_dummy_probe_wM for omitting write mode probe
+
+2009.11.12.180241  [2895]
+cdrskin/cdrskin.c
+Implemented option -V for logging of SCSI commands
+
+2009.11.12.193617  [2896]
+cdrskin/cdrskin.c
+cdrskin/cdrskin.1
+Man page entry and help text for option -V
+
+------------------------------------ cycle  - cdrskin-0.7.3 - 2009.11.12.194644
+* Implemented option -V for logging of SCSI commands
+* Workaround for Pioneer DVR-216D refusal to eject
+
+
+13 Nov 2009  [2898]
+svn copy -m Branching for libburn bugfix release 0.7.2.pl01 \
+    http://svn.libburnia-project.org/libburn/tags/ZeroSevenTwo \
+    http://svn.libburnia-project.org/libburn/branches/ZeroSevenTwoPl01
+
+2009.11.12.230001  [2899]
+README
+libburn/write.c
+libburn/sbc.c
+cdrskin/README
+cdrskin/cdrskin_eng.html
+cdrskin/cdrskin_timestamp.h
+libburn-0.7.2.pl01 : Workarounds for Pioneer DVR-216D rev 1.09
+
+13 Nov 2009  [2900]
+svn move -m libburn bugfix release 0.7.2.pl01 is ready \
+    http://svn.libburnia-project.org/libburn/branches/ZeroSevenTwoPl01 \
+    http://svn.libburnia-project.org/libburn/tags/ZeroSevenTwoPl01
+
+-------------------------------- patch - cdrskin-0.7.2.pl01 - 2009.11.12.230001
+* Workaround for Pioneer DVR-216D which got stuck on DVD-R burns
+* Workaround for Pioneer DVR-216D refusal to eject
+
+
+2009.11.15.115923  [2901]
+libburn/file.c
+Corrected an outdated remark
+
+2009.11.15.152541  [2902]
+cdrskin/cdrskin.c
+cdrskin/cdrfifo.c
+cdrskin/compile_cdrskin.sh
+New compile_cdrskin.sh option -o_direct (Linux only)
+
+2009.11.15.153140  [2903]
+libburn/libburn.h
+libburn/options.h
+libburn/options.c
+libburn/write.c
+New API calls burn_write_opts_set_dvd_obs(), burn_write_opts_set_stdio_fsync()
+
+2009.11.15.165016  [2904]
+cdrskin/cdrskin.c
+cdrskin/cdrskin.1
+New options dvd_obs= and stdio_fsync=
+
+2009.11.16.165420  [2905]
+configure.ac
+Makefile.am
+libburn/write.c
+cdrskin/cdrskin.c
+cdrskin/cdrfifo.h
+cdrskin/cdrfifo.c
+cdrskin/cdrskin.1
+Configure options --enable-cdrskin-fifo-odirect, --enable-dvd-obs-64k
+
+16 Nov 2009  [2906]
+cdrskin/compile_cdrskin.sh
+New compile_cdrskin.sh option -dvd_obs_64k, adapted to new .o names of libburn
+
+16 Nov 2009  [2907]
+README
+cdrskin/README
+cdrskin/cdrskin_eng.html
+Updated build instructions of libburn and cdrskin
+
+------------------------------------ cycle  - cdrskin-0.7.3 - 2009.11.16.180334
+* New API calls burn_write_opts_set_dvd_obs(), burn_write_opts_set_stdio_fsync()
+* New options dvd_obs= and stdio_fsync=
+* Configure option --enable-dvd-obs-64k
+* New compile_cdrskin.sh option -dvd_obs_64k
+
+
+2009.11.17.093602  [2908]
+configure.ac
+Makefile.am
+cdrskin/compile_cdrskin.sh
+Revoked usage of libburn_libburn_la_CFLAGS in Makefile.am (ugly .o names)
+
+------------------------------------ cycle  - cdrskin-0.7.3 - 2009.11.17.100248
+
+
+17 Nov 2009  [2912]
+cdrskin/compile_cdrskin.sh
+Corrected help text of cdrskin static compile script
+
+2009.11.18.122713  [2913]
+libburn/drive.c
+libburn/spc.c
+libburn/mmc.h
+libburn/mmc.c
+Split automatic drive start function from mmc_function_spy()
+
+2009.11.18.185733  [2914]
+libburn/write.c
+Reserving enough track space for 64 kB write chunks
+
+------------------------------------ cycle  - cdrskin-0.7.3 - 2009.11.18.190403
+
+
+2009.11.20.134952  [2915]
+libburn/libburn.h
+libburn/write.c
+libburn/sg-linux.c
+Experiment about SG_FLAG_DIRECT_IO
+
+2009.11.20.175854  [2916]
+cdrskin/cdrfifo.c
+Avoided use of uninitialized variable
+
+------------------------------------ cycle  - cdrskin-0.7.3 - 2009.11.21.122202
+
+
+2009.11.21.191516  [2917]
+libburn/write.c
+Longer READ BUFFER CAPACITY interval with DVD/BD writing
+
+2009.11.21.191717  [2918]
+cdrskin/cdrskin.c
+Enabled cdrskin O_DIRECT with fs=0
+
+2009.11.22.115227  [2919]
+libburn/write.c   
+Bug fix: DVD DAO track size was rounded up much too generously 
+
+2009.11.23.185725  [2920]
+configure.ac
+Makefile.am
+README
+libburn/libburn.h
+libburn/file.h
+libburn/file.c
+libburn/async.c
+libburn/write.c
+libburn/sg-linux.c
+libburn/sg-freebsd.c
+libburn/sg-freebsd-port.c
+libburn/sg-dummy.c
+New API calls burn_os_open_track_src() , burn_os_alloc_buffer()
+
+2009.11.23.193252  [2921]
+cdrskin/cdrskin.c
+cdrskin/cdrfifo.c
+cdrskin/compile_cdrskin.sh
+cdrskin/README
+Gave up cdrskin specific O_DIRECT compile option
+
+2009.11.25.122233  [2920]
+libburn/libburn.h
+libburn/sg-linux.c
+libburn/sg-freebsd.c
+libburn/sg-freebsd-port.c
+libburn/sg-dummy.c
+Gave up call burn_os_close_track_src() introduced by rev 2920
+
+2009.11.25.160153  [2923]
+libburn/libburn.h
+libburn/file.c
+libburn/libdax_msgs.h
+New API call burn_fifo_fill()
+
+2009.11.26.144452  [2924]
+libburn/libburn.h
+libburn/file.h
+libburn/file.c
+New API calls burn_fifo_get_statistics(), burn_fifo_next_interval()
+
+2009.11.26.211418  [2925]
+cdrskin/cdrskin.c
+cdrskin/compile_cdrskin.sh
+Compiler option -use_libburn_fifo to switch non-CD from cdrfifo to libburn fifo
+
+2009.11.28.122436  [2926]
+libburn/sg-linux.c
+Using mmap() by default for allocating read buffers
+
+------------------------------------ cycle  - cdrskin-0.7.3 - 2009.11.28.165658
+* Bug fix: DVD DAO track size was rounded up much too generously
+* New API call burn_fifo_fill()
+* New API calls burn_fifo_get_statistics(), burn_fifo_next_interval()
+* Configure option --enable-track-src-odirect
+
+
+2009.11.30.100152  [2929]
+libburn/sbc.c
+Documented meaning of START/STOP UNIT bits
+
+2009.12.02.103036  [2930]
+libburn/write.c
+Gave up CLOSE TRACK with CD TAO burn runs
+
+2009.12.05.111822  [2931]
+libburn/mmc.c
+Bug fix: SIGSEGV with LG GH22LS30 when inquiring media product id
+
+------------------------------------ cycle  - cdrskin-0.7.3 - 2009.12.05.112623
+* Bug fix: SIGSEGV from NULL pointer with media product id inquiry on LG GH22LS30
+
+
+2009.12.05.142309  [2932]
+libburn/libburn.h
+libburn/write.c
+Made effect of macro Libburn_pioneer_dvr_216d_read_buf_caP unconditional
+
+2009.12.05.143707  [2933]
+libburn/mmc.c
+libburn/sg-linux.c
+Converted stderr experiment messages to DEBUG messages
+
+2009.12.06.073404  [2934]
+libburn/mmc.c
+Some clarifications about the GH22LS30 problem
+
+2009.12.06.074622  [2935]
+libburn/write.c
+Some clarifications about the Linux throughput problem
+
+2009.12.06.093847  [2936]
+cdrskin/compile_cdrskin.sh
+Now default in cdrskin: use of libburn fifo with DVD and BD single track
+
+06 Dec 2009  [2937]
+svn copy -m Branching for libburn release 0.7.4
+http://svn.libburnia-project.org/libburn/trunk
+http://svn.libburnia-project.org/libburn/branches/ZeroSevenFour
+
+
+2009.12.06.160001  [2938]
+Makefile.am
+configure.ac
+README
+libburn/libburn.h
+cdrskin/cdrskin.c 
+cdrskin/README
+cdrskin/compile_cdrskin.sh
+cdrskin/cdrskin_timestamp.h
+cdrskin/cdrskin_eng.html
+Made number transition to 0.7.4
+
+06 Dec 2009  [2939]
+- cdrskin/add_ts_changes_to_libburn_0_7_2
+- cdrskin/add_ts_changes_to_libburn_0_7_3
++ cdrskin/add_ts_changes_to_libburn_0_7_4
++ cdrskin/add_ts_changes_to_libburn_0_7_5
 Updated cdrskin tarball generator
 
   []
 cdrskin/changelog.txt
 Documented changes and release timestamp
 
+------------------------------ release - cdrskin-0.7.4.pl00 - 2009.12.06.160001
+* Configure options --enable-dvd-obs-64k, --enable-track-src-odirect
+* New API calls burn_write_opts_set_dvd_obs(), burn_write_opts_set_stdio_fsync()
+* New API call burn_set_scsi_logging()
+* New API calls burn_fifo_get_statistics(), burn_fifo_next_interval(), burn_fifo_fill()
+* Re-implemented ECMA-130 P-parity, Q-parity and scrambling for BURN_WRITE_RAW
+* Workaround for Pioneer DVR-216D which got stuck on DVD-R burns
+* Workaround for Pioneer DVR-216D refusal to eject
+* Bug fix: SIGSEGV from NULL pointer with media product id inquiry on LG GH22LS30
+* Bug fix: DVD DAO track size was rounded up much too generously
+* cdrskin option -V for logging of SCSI commands
+* New cdrskin options dvd_obs= and stdio_fsync=
+* New compile_cdrskin.sh option -dvd_obs_64k
 
------------------------------------- cycle  - cdrskin-0.6.7 - 
------------------------------------- cycle  - cdrskin-0.6.7 - 
+
+------------------------------------ cycle  - cdrskin-0.7.5 - 
+------------------------------------ cycle  - cdrskin-0.7.5 - 
 
 ===============================================================================
                                     TODO
@@ -6651,6 +7601,8 @@ Documented changes and release timestamp
 
 --------------------------------- bugs -------------------------------------
 
+- handle HD DVD profiles 0x50 "HD DVD-ROM", 0x51 "HD DVD-R", 0x52 "HD DVD-RAM"
+  as readable.
 
 - Do something about drive->buffer asynchronous race conditions
   and dangerous use of local heap memory.
@@ -6672,6 +7624,9 @@ READ TRACK INFORMATION[#5]:
 
 ------------------------------ end of bugs ---------------------------------
 
+
+- Make Libburn_stdio_flush_limiT adjustable
+
 Support for BD-R SRM+POW
 
 ? Provide an option to open track source file O_DIRECT ?

cdrskin/compile_cdrskin.sh

@@ -1,16 +1,22 @@
 #!/bin/sh
 
 # compile_cdrskin.sh  
-# Copyright 2005 - 2008 Thomas Schmitt, scdbackup@gmx.net, GPL version 2
+# Copyright 2005 - 2009 Thomas Schmitt, scdbackup@gmx.net, GPL version 2
 # to be executed within  ./libburn-*  resp ./cdrskin-*
 
 debug_opts="-O2"
 def_opts=
 largefile_opts="-D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE=1"
-libvers="-DCdrskin_libburn_0_6_7"
-cleanup_src_or_obj="libburn/cleanup.o"
-libdax_msgs_o="libburn/libdax_msgs.o"
-libdax_audioxtr_o="libburn/libdax_audioxtr.o"
+fifo_opts="-DCdrskin_use_libburn_fifO"
+libvers="-DCdrskin_libburn_0_7_4"
+
+# To be used if Makefile.am uses libburn_libburn_la_CFLAGS
+# burn="libburn/libburn_libburn_la-"
+burn="libburn/"
+
+cleanup_src_or_obj="$burn"cleanup.o
+libdax_msgs_o="$burn"libdax_msgs.o
+libdax_audioxtr_o="$burn"libdax_audioxtr.o
 do_strip=0
 static_opts=
 warn_opts="-Wall"
@@ -31,20 +37,20 @@ do
   then
     libvers="-DCdrskin_libburn_cvs_A60220_tS"
     libdax_audioxtr_o=
-    libdax_msgs_o="libburn/message.o"
+    libdax_msgs_o="$burn"message.o
     cleanup_src_or_obj="-DCleanup_has_no_libburn_os_H cdrskin/cleanup.c"
-  elif test "$i" = "-libburn_0_6_6"
+  elif test "$i" = "-libburn_0_7_4"
   then
-    libvers="-DCdrskin_libburn_0_6_6"
-    libdax_audioxtr_o="libburn/libdax_audioxtr.o"
-    libdax_msgs_o="libburn/libdax_msgs.o"
-    cleanup_src_or_obj="libburn/cleanup.o"
+    libvers="-DCdrskin_libburn_0_7_4"
+    libdax_audioxtr_o="$burn"libdax_audioxtr.o
+    libdax_msgs_o="$burn"libdax_msgs.o
+    cleanup_src_or_obj="$burn"cleanup.o
   elif test "$i" = "-libburn_svn"
   then
-    libvers="-DCdrskin_libburn_0_6_7"
-    libdax_audioxtr_o="libburn/libdax_audioxtr.o"
-    libdax_msgs_o="libburn/libdax_msgs.o"
-    cleanup_src_or_obj="libburn/cleanup.o"
+    libvers="-DCdrskin_libburn_0_7_5"
+    libdax_audioxtr_o="$burn"libdax_audioxtr.o
+    libdax_msgs_o="$burn"libdax_msgs.o
+    cleanup_src_or_obj="$burn"cleanup.o
   elif test "$i" = "-newapi" -o "$i" = "-experimental"
   then
     def_opts="$def_opts -DCdrskin_new_api_tesT"
@@ -55,6 +61,9 @@ do
   elif test "$i" = "-no_largefile"
   then
     largefile_opts=	
+  elif test "$i" = "-dvd_obs_64k"
+  then
+    def_opts="$def_opts -DCdrskin_dvd_obs_default_64K"
   elif test "$i" = "-do_not_compile_cdrskin"
   then
     compile_cdrskin=0
@@ -66,6 +75,16 @@ do
   elif test "$i" = "-do_strip"
   then
     do_strip=1
+  elif test "$i" = "-use_libburn_fifo"
+  then
+    fifo_opts="-DCdrskin_use_libburn_fifO"
+  elif test "$i" = "-use_no_libburn_fifo"
+  then
+    fifo_opts=""
+  elif test "$i" = "-use_no_cdrfifo"
+  then
+    fifo_source=
+    fifo_opts="-DCdrskin_use_libburn_fifO -DCdrskin_no_cdrfifO"
   elif test "$i" = "-g"
   then
     debug_opts="-g"
@@ -75,9 +94,12 @@ do
     echo "Options:"
     echo "  -compile_cdrfifo  compile program cdrskin/cdrfifo."
     echo "  -compile_dewav    compile program test/dewav without libburn."
-    echo "  -libburn_0_6_6    set macro to match libburn-0.6.6"
+    echo "  -libburn_0_7_4    set macro to match libburn-0.7.4"
     echo "  -libburn_svn      set macro to match current libburn-SVN."
+    echo "  -dvd_obs_64k      64 KB default size for DVD/BD writing."
     echo "  -do_not_compile_cdrskin  omit compilation of cdrskin/cdrskin."
+    echo "  -use_no_libburn_fifo  use cdrfifo even for single track non-CD"
+    echo "  -use_no_cdrfifo   always use fifo of libburn and never cdrfifo"
     echo "  -experimental     use newly introduced libburn features."
     echo "  -oldfashioned     use pre-0.2.2 libburn features only."
     echo "  -do_diet          produce capability reduced lean version."
@@ -98,13 +120,14 @@ echo "Build timestamp   :  $timestamp"
 
 if test "$compile_cdrskin"
 then
-  echo "compiling program cdrskin/cdrskin.c $static_opts $debug_opts $libvers $def_opts $cleanup_src_or_obj"
+  echo "compiling program cdrskin/cdrskin.c $fifo_source $static_opts $debug_opts $libvers $fifo_opts $def_opts $cleanup_src_or_obj"
   cc -I. \
     $warn_opts \
     $static_opts \
     $debug_opts \
     $libvers \
     $largefile_opts \
+    $fifo_opts \
     $def_opts \
     \
     -DCdrskin_build_timestamP='"'"$timestamp"'"' \
@@ -116,31 +139,31 @@ then
     \
     $cleanup_src_or_obj \
     \
-    libburn/async.o \
-    libburn/debug.o \
-    libburn/drive.o \
-    libburn/file.o \
-    libburn/init.o \
-    libburn/options.o \
-    libburn/source.o \
-    libburn/structure.o \
+    "$burn"async.o \
+    "$burn"debug.o \
+    "$burn"drive.o \
+    "$burn"file.o \
+    "$burn"init.o \
+    "$burn"options.o \
+    "$burn"source.o \
+    "$burn"structure.o \
     \
-    libburn/sg.o \
-    libburn/write.o \
-    libburn/read.o \
+    "$burn"sg.o \
+    "$burn"write.o \
+    "$burn"read.o \
     $libdax_audioxtr_o \
     $libdax_msgs_o \
     \
-    libburn/mmc.o \
-    libburn/sbc.o \
-    libburn/spc.o \
-    libburn/util.o \
+    "$burn"mmc.o \
+    "$burn"sbc.o \
+    "$burn"spc.o \
+    "$burn"util.o \
     \
-    libburn/sector.o \
-    libburn/toc.o \
+    "$burn"sector.o \
+    "$burn"toc.o \
     \
-    libburn/crc.o \
-    libburn/lec.o \
+    "$burn"crc.o \
+    "$burn"ecma130ab.o \
     \
     -lpthread
 
@@ -183,8 +206,8 @@ then
      -DDewav_without_libburN \
      -o test/dewav \
      test/dewav.c \
-     libburn/libdax_audioxtr.o \
-     libburn/libdax_msgs.o \
+     "$burn"libdax_audioxtr.o \
+     "$burn"libdax_msgs.o \
      \
     -lpthread
 

configure.ac

@@ -1,4 +1,4 @@
-AC_INIT([libburn], [0.6.7], [http://libburnia-project.org])
+AC_INIT([libburn], [0.7.4], [http://libburnia-project.org])
 AC_PREREQ([2.50])
 dnl AC_CONFIG_HEADER([config.h])	
 
@@ -7,7 +7,7 @@ AC_CANONICAL_TARGET
 
 AM_INIT_AUTOMAKE([subdir-objects])
 
-dnl Notes by ts A71207 - A90507 :
+dnl Notes by ts A71207 - A91012 :
 dnl
 dnl Regrettably the meaning of the various version types was misunderstood
 dnl before version 0.4.1.
@@ -72,6 +72,10 @@ dnl    0.6.0 = libburn.so.4.25.0
 dnl    0.6.2 = libburn.so.4.27.0
 dnl    0.6.4 = libburn.so.4.29.0
 dnl    0.6.6 = libburn.so.4.31.0
+dnl    0.6.8 = libburn.so.4.33.0
+dnl    0.7.0 = libburn.so.4.35.0
+dnl    0.7.2 = libburn.so.4.37.0
+dnl    0.7.4 = libburn.so.4.39.0
 dnl
 dnl So LT_CURRENT, LT_REVISION and LT_AGE get set directly here.
 dnl SONAME of the emerging library is  LT_CURRENT - LT_AGE.
@@ -96,8 +100,8 @@ dnl If BURN_*_VERSION changes, be sure to change AC_INIT above to match.
 dnl
 dnl As said: Only copies. Original in libburn/libburn.h : burn_header_version_*
 BURN_MAJOR_VERSION=0
-BURN_MINOR_VERSION=6
-BURN_MICRO_VERSION=7
+BURN_MINOR_VERSION=7
+BURN_MICRO_VERSION=4
 BURN_VERSION=$BURN_MAJOR_VERSION.$BURN_MINOR_VERSION.$BURN_MICRO_VERSION
 
 AC_SUBST(BURN_MAJOR_VERSION)
@@ -108,15 +112,15 @@ AC_SUBST(BURN_VERSION)
 dnl Libtool versioning
 LT_RELEASE=$BURN_MAJOR_VERSION.$BURN_MINOR_VERSION.$BURN_MICRO_VERSION
 dnl
-dnl ts A90507
-dnl ### This is the release version libburn-0.6.6 = libburn.so.4.31.0
-dnl This is the development version after above release version
+dnl ts A91206
+dnl This is the release version libburn-0.7.4 = libburn.so.4.39.0
+dnl ### This is the development version after above release version
 dnl LT_CURRENT++, LT_AGE++ has not yet happened.
 dnl ### LT_CURRENT++, LT_AGE++ has happened meanwhile.
 dnl
-dnl SONAME = 35 - 31 = 4 . Linux library name = libburn.so.4.31.0
-LT_CURRENT=35
-LT_AGE=31
+dnl SONAME = 43 - 39 = 4 . Linux library name = libburn.so.4.39.0
+LT_CURRENT=43
+LT_AGE=39
 LT_REVISION=0
 LT_CURRENT_MINUS_AGE=`expr $LT_CURRENT - $LT_AGE`
 
@@ -176,6 +180,37 @@ dnl If this would be done more specifically in Makefile.am
 dnl via libburn_libburn_la_CFLAGS then undesired .o file names would emerge
 CFLAGS="$CFLAGS $STATVFS_DEF"
 
+dnl ts A91122
+AC_ARG_ENABLE(track-src-odirect,
+[  --enable-track-src-odirect   Enable use of O_DIRECT with track input, default=no],
+               , enable_track_src_odirect=no)
+if test x$enable_track_src_odirect = xyes; then
+    LIBBURN_O_DIRECT_DEF="-DLibburn_read_o_direcT"
+    echo "enabled  use of O_DIRECT with track input"
+else
+    LIBBURN_O_DIRECT_DEF=
+    echo "disabled use of O_DIRECT with track input"
+fi
+dnl Avoid the need for libburn_libburn_la_CFLAGS in Makefile.am (ugly .o names)
+dnl ### AC_SUBST(LIBBURN_O_DIRECT_DEF)
+CFLAGS="$CFLAGS $LIBBURN_O_DIRECT_DEF"
+
+dnl ts A91116
+AC_ARG_ENABLE(dvd-obs-64k,
+[  --enable-dvd-obs-64k         64 KB default size for DVD/BD writing, default=no],
+               , enable_fifo_odirect=no)
+if test x$enable_dvd_obs_64k = xyes; then
+    LIBBURN_DVD_OBS_64K="-DLibburn_dvd_obs_default_64K"
+    echo "enabled  write size default 64 KB on DVD and BD"
+else
+    LIBBURN_DVD_OBS_64K=
+    echo "disabled write size default 64 KB on DVD and BD"
+fi
+dnl Avoid the need for libburn_libburn_la_CFLAGS in Makefile.am (ugly .o names)
+dnl ### AC_SUBST(LIBBURN_DVD_OBS_64K)
+CFLAGS="$CFLAGS $LIBBURN_DVD_OBS_64K"
+
+
 dnl Add compiler-specific flags
 
 dnl See if the user wants aggressive optimizations of the code
@@ -195,7 +230,6 @@ else
     CFLAGS="$CFLAGS -DDEBUG"
 fi
 
-
 dnl Determine target directory for libburn-*.pc
 dnl Important: Must be performed _after_ TARGET_SHIZZLE
 dnl

libburn/async.c

@@ -627,7 +627,8 @@ int burn_fifo_start(struct burn_source *source, int flag)
 	fs->is_started = -1;
 
 	/* create and set up ring buffer */;
-	fs->buf = calloc(fs->chunksize, fs->chunks);
+	fs->buf = burn_os_alloc_buffer(
+			((size_t) fs->chunksize) * (size_t) fs->chunks, 0);
 	if (fs->buf == NULL) {
 		/* >>> could not start ring buffer */;
 		return -1;

libburn/drive.c

@@ -40,6 +40,9 @@
 /* A70903 : for burn_scsi_setup_drive() */
 #include "spc.h"
 
+/* A90815 : for mmc_obtain_profile_name() */
+#include "mmc.h"
+
 #include "libdax_msgs.h"
 extern struct libdax_msgs *libdax_messenger;
 
@@ -421,10 +424,6 @@ struct burn_drive *burn_drive_finish_enum(struct burn_drive *d)
 	char msg[BURN_DRIVE_ADR_LEN + 160];
 	int ret;
 
-	/* ts A60821
-   	<<< debug: for tracing calls which might use open drive fds */
-	int mmc_function_spy(struct burn_drive *d, char * text);
-
 	d->drive_role = 1; /* MMC drive */
 
 	t = burn_drive_register(d);
@@ -518,6 +517,7 @@ int burn_drive_release_fl(struct burn_drive *d, int flag)
 			d->unlock(d);
 		if ((flag & 7) == 1)
 			d->eject(d);
+		burn_drive_snooze(d, 0);
 		d->release(d);
 	}
 
@@ -530,6 +530,22 @@ int burn_drive_release_fl(struct burn_drive *d, int flag)
 }
 
 
+/* API */
+/* ts A90824
+   @param flag bit0= wake up (else start snoozing)
+*/
+int burn_drive_snooze(struct burn_drive *d, int flag)
+{
+	if (d->drive_role != 1)
+		return 0;
+	if (flag & 1)
+		d->start_unit(d);
+	else
+		d->stop_unit(d);
+	return 1;
+}
+
+
 /* API */
 void burn_drive_release(struct burn_drive *d, int le)
 {
@@ -890,6 +906,22 @@ static int drive_getcaps(struct burn_drive *d, struct burn_drive_info *out)
 	out->write_simulate = !!d->mdata->simulate;
 	out->c2_errors = !!d->mdata->c2_pointers;
 	out->drive = d;
+
+#ifdef Libburn_pioneer_dvr_216d_dummy_probe_wM
+
+	/* ts A91112 */
+	/* Set default block types. The call d->probe_write_modes() is quite
+	   obtrusive. It may be performed explicitely by new API call
+             burn_drive_probe_cd_write_modes().
+	*/
+	out->tao_block_types = d->block_types[BURN_WRITE_TAO] =
+					 BURN_BLOCK_MODE1 | BURN_BLOCK_RAW0;
+	out->sao_block_types = d->block_types[BURN_WRITE_SAO] = BURN_BLOCK_SAO;
+	out->raw_block_types = d->block_types[BURN_WRITE_RAW] = 0;
+	out->packet_block_types = 0;
+
+#else /* Libburn_pioneer_dvr_216d_dummy_probe_wM */
+
 	/* update available block types for burners */
 	if (out->write_dvdram || out->write_dvdr ||
 	    out->write_cdrw || out->write_cdr)
@@ -898,10 +930,37 @@ static int drive_getcaps(struct burn_drive *d, struct burn_drive_info *out)
 	out->sao_block_types = d->block_types[BURN_WRITE_SAO];
 	out->raw_block_types = d->block_types[BURN_WRITE_RAW];
 	out->packet_block_types = d->block_types[BURN_WRITE_PACKET];
+
+#endif /* ! Libburn_pioneer_dvr_216d_dummy_probe_wM */
+
 	return 1;
 }
 
 
+#ifdef Libburn_pioneer_dvr_216d_dummy_probe_wM 
+
+/* ts A91112 candidate for API */
+/* Probe available CD write modes and block types.
+*/
+int burn_drive_probe_cd_write_modes(struct burn_drive_info *dinfo)
+{
+	struct burn_drive *d = dinfo->drive;
+
+	if (d == NULL)
+		return 0;
+	if (dinfo->write_dvdram || dinfo->write_dvdr ||
+	    dinfo->write_cdrw || dinfo->write_cdr)
+		d->probe_write_modes(d);
+	dinfo->tao_block_types = d->block_types[BURN_WRITE_TAO];
+	dinfo->sao_block_types = d->block_types[BURN_WRITE_SAO];
+	dinfo->raw_block_types = d->block_types[BURN_WRITE_RAW];
+	dinfo->packet_block_types = d->block_types[BURN_WRITE_PACKET];
+	return 1;
+}
+
+#endif /* Libburn_pioneer_dvr_216d_dummy_probe_wM */
+
+
 /* ts A70907 : added parameter flag */
 /* @param flag bit0= reset global drive list */
 int burn_drive_scan_sync(struct burn_drive_info *drives[],
@@ -1260,6 +1319,7 @@ int burn_drive_grab_dummy(struct burn_drive_info *drive_infos[], char *fname)
 	int ret = -1, fd = -1, role = 0;
 	/* divided by 512 it needs to fit into a signed long integer */
 	off_t size = ((off_t) (512 * 1024 * 1024 - 1) * (off_t) 2048);
+	off_t read_size = -1;
 	struct burn_drive *d= NULL, *regd_d;
 	struct stat stbuf;
 
@@ -1272,6 +1332,16 @@ int burn_drive_grab_dummy(struct burn_drive_info *drive_infos[], char *fname)
 			ret = fstat(fd, &stbuf);
 		else
 			ret = stat(fname, &stbuf);
+		if (ret != -1) {
+			if (S_ISREG(stbuf.st_mode))
+				read_size = stbuf.st_size;
+			else if (S_ISBLK(stbuf.st_mode)) {
+				ret = burn_os_stdio_capacity(fname,
+								&read_size);
+				if (ret <= 0)
+					read_size = -1;  
+			}
+		}
 		if (ret == -1 || S_ISBLK(stbuf.st_mode) ||
 				S_ISREG(stbuf.st_mode)) {
 			ret = burn_os_stdio_capacity(fname, &size);
@@ -1330,6 +1400,10 @@ int burn_drive_grab_dummy(struct burn_drive_info *drive_infos[], char *fname)
 		d->current_is_supported_profile = 1;
 		d->block_types[BURN_WRITE_TAO] = BURN_BLOCK_MODE1;
 		d->block_types[BURN_WRITE_SAO] = BURN_BLOCK_SAO;
+		if (read_size >= 0)
+			/* despite its name : last valid address, not size */
+			d->media_read_capacity =
+				read_size / 2048 - !(read_size % 2048);
 		burn_drive_set_media_capacity_remaining(d, size);
 
 		/* >>> ? open file for a test ? (>>> beware of "-" = stdin) */;
@@ -1889,11 +1963,16 @@ int burn_disc_read_atip(struct burn_drive *d)
 	}
 	if(d->drive_role != 1)
 		return 0;
-	if (d->current_profile == -1 || d->current_is_cd_profile) {
+	if ((d->current_profile == -1 || d->current_is_cd_profile)
+	    && (d->mdata->cdrw_write || d->current_profile != 0x08)) {
 		d->read_atip(d);
 		/* >>> some control of success would be nice :) */
 	} else {
-		/* mmc5r03c.pdf 6.26.3.6.3 : ATIP is undefined for non-CD */;
+		/* mmc5r03c.pdf 6.26.3.6.3 : ATIP is undefined for non-CD
+		   (and it seems meaningless for non-burners).
+		   ts A90823: Pseudo-CD U3 memory stick stalls with ATIP.
+		              It is !cdrw_write and profile is 0x08.
+		*/
 		return 0;
 	}
 	return 1;
@@ -2001,6 +2080,30 @@ int burn_disc_get_profile(struct burn_drive *d, int *pno, char name[80])
 }
 
 
+/* ts A90815 : New API function */
+int burn_drive_get_all_profiles(struct burn_drive *d, int *num_profiles,
+				int profiles[64], char is_current[64])
+{
+	int i;
+
+	*num_profiles = d->num_profiles;
+	for (i = 0; i < d->num_profiles; i++) {
+		profiles[i] = (d->all_profiles[i * 4] << 8) |
+				d->all_profiles[i * 4 + 1];
+		is_current[i] = d->all_profiles[i * 4 + 2] & 1;
+	}
+	return 1;
+}
+
+
+/* ts A90815 : New API function */
+int burn_obtain_profile_name(int profile_number, char name[80])
+{
+	strcpy(name, mmc_obtain_profile_name(profile_number));
+	return(name[0] != 0);
+}
+
+
 /* ts A61223 : New API function */
 int burn_drive_wrote_well(struct burn_drive *d)
 {
@@ -2573,7 +2676,58 @@ int burn_drive_set_media_capacity_remaining(struct burn_drive *d, off_t value)
 /* ts A81215 : API */
 int burn_get_read_capacity(struct burn_drive *d, int *capacity, int flag)
 {
-	*capacity = d->media_read_capacity;
+	*capacity = d->media_read_capacity + 1;
 	return (d->media_read_capacity != 0x7fffffff);
 }
 
+
+/* ts A90903 : API */
+int burn_disc_get_media_id(struct burn_drive *d,
+	char **product_id, char **media_code1, char **media_code2,
+	char **book_type, int flag)
+{
+	int ret;
+
+	*product_id = *media_code1 = *media_code2 = *book_type = NULL;
+	if (burn_drive_get_drive_role(d) != 1)
+		return 0;
+	ret = mmc_get_media_product_id(d,
+			 product_id, media_code1, media_code2, book_type,
+			 flag & 1);
+	return ret;
+}
+
+
+/* ts A90909 : API */
+/**
+    @param valid   Replies bits which indicate the validity of other reply
+                   parameters or the state of certain CD info bits:
+                   bit0= disc_type valid
+                   bit1= disc_id valid
+                   bit2= bar_code valid
+                   bit3= disc_app_code valid
+                   bit4= Disc is unrestricted (URU bit)
+                   bit5= Disc is nominally erasable (Erasable bit)
+                         This will be set with overwriteable media which
+                         libburn normally considers to be unerasable blank.
+*/
+int burn_disc_get_cd_info(struct burn_drive *d, char disc_type[80],
+			unsigned int *disc_id, char bar_code[9], int *app_code,
+	 		int *valid)
+{
+	if (d->disc_type == 0x00) {
+		strcpy(disc_type, "CD-DA or CD-ROM");
+	} else if (d->disc_type == 0x10) {
+		strcpy(disc_type, "CD-I");
+	} else if (d->disc_type == 0x20) {
+		strcpy(disc_type, "CD-ROM XA");
+	} else {
+		strcpy(disc_type, "undefined");
+	}
+	*disc_id = d->disc_id;
+	memcpy(bar_code, d->disc_bar_code, 8);
+	bar_code[9]= 0;
+	*app_code = d->disc_app_code;
+	*valid =  d->disc_info_valid;
+	return 1;
+}

libburn/ecma130ab.c

@@ -0,0 +1,850 @@
+
+/* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */
+
+/* ts A91016 : libburn/ecma130ab.c is the replacement for old libburn/lec.c
+
+   Copyright 2009, Thomas Schmitt <scdbackup@gmx.net>, libburnia-project.org
+
+   This code module implements the production of RSPC parity bytes (P- and Q-
+   parity) and the scrambling of raw CD-ROM sectors as specified in ECMA-130:
+     http://www.ecma-international.org/publications/files/ECMA-ST/Ecma-130.pdf
+
+   The following statements about Galois Fields have been learned mostly from
+     http://www.cs.utk.edu/~plank/plank/papers/CS-96-332.pdf
+   by James S. Plank after an e-mail exchange with Norbert Preining.
+
+   The output has been compared with the output of the old code of libburn
+   which was labeled "borrowed HEAVILY from cdrdao" and claimed by Joerg
+   Schilling to stem from code by Heiko Eissfeldt.
+
+   -------------------------------------------------------------------------
+   Note: In this text, "^" denotes exponentiation and not the binary exor
+         operation. Confusingly in the C code "^" is said exor.
+   Note: This is not C1, C2 which is rather mentioned in ECMA-130 Annex C and
+         always performed inside the drive.
+   -------------------------------------------------------------------------
+
+
+                            RSPC resp. P- and Q-Parity
+
+   ECMA-130 Annex A prescribes to compute the parity bytes for P-columns and
+   Q-diagonals by RSPC based on a Galois Field GF(2^8) with enumerating
+   polynomials x^8+x^4+x^3+x^2+1 (i.e. 0x11d) and x^1 (i.e. 0x02).
+   Bytes 12 to 2075 of a audio-sized sector get ordered in two byte words
+   as 24 rows and 43 columns. Then this matrix is split into a LSB matrix
+   and a MSB matrix of the same layout. Parity bytes are to be computed
+   from these 8-bit values.
+   2 P-bytes cover each column of 24 bytes. They get appended to the matrix
+   as rows 24 and 25.
+   2 Q-bytes cover each the 26 diagonals of the extended matrix.
+
+   Both parity byte pairs have to be computed so that extended rows or
+   diagonals match this linear equation:
+      H x V = (0,0)
+   H is a 2-row matrix of size n matching the length of the V ectors
+     [   1        1     ...   1   1 ]
+     [ x^(n-1)  x^(n-2)      x^1  1 ]
+   Vp represents a P-row. It is a byte vector consisting of row bytes at
+   position 0 to 23 and the two parity bytes which shall be determined
+   at position 24 and 25. So Hp has 26 columns.
+   Vq represents a Q-diagonal. It is a byte vector consisting of diagonal
+   bytes at position 0 to 42 and the two parity bytes at position 43 and 44.
+   So Hq has 45 columns. The Q-diagonals cover P-parity bytes.
+
+   By applying some high school algebra one gets the parity bytes b0, b1 of
+   vector V = (n_payload_bytes, b0 , b1) as
+
+     b0 = ( H[n] * SUM(n_payload_bytes) - H[0..(n-1)] x n_payload_bytes )
+          / (H[n+1] - H[n])
+     b1 = - SUM(n_payload_bytes) - b0
+
+   H[i] is the i-the element of the second row of matrix H. E.g. H[0] = x^(n-1)
+   The result has to be computed by Galois field arithmetics. See below.
+
+   The P-parity bytes of each column get reunited as LSB and MSB of two words.
+   word1 gets written to positions 1032 to 1074, word0 to 1075 to 1117.
+   The Q-parity bytes of each diagonal get reunited too. word1 goes to 1118
+   to 1143, word0 to 1144 to 1169.
+   >>> I do not read this swap of word1 and word0 from ECMA-130 Annex A.
+   >>> But the new output matches the old output only if it is done that way.
+   >>> See correctness reservation below.
+
+   Algebra on Galois fields is the same as on Rational Numbers.
+   But arithmetics is defined by operations on polynomials rather than the
+   usual integer arithmetics on binary numbers.
+   Addition and subtraction are identical with the binary exor operator.
+   Multiplication and division would demand polynomial division, e.g. by the
+   euclidian algorithm. The computing path over logarithms and powers follows
+   algebra and allows to reduce the arithmetic task to table lookups, additions
+   modulo 255, and exor operations. Note that the logarithms are natural
+   numbers, not polynomials. They get added or subtracted by the usual addition
+   (not by exor) and their polynomial power depends on their value modulo 255.
+
+   Needed are a logarithm table and a power table (or inverse logarithm table)
+   for Galois Field GF(2^8) which will serve to perform the peculiar
+   multiplication and division operation of Galois fields.
+
+   The power table is simply an enumeration of x^n accorting to
+   GF-multiplication. It also serves as second line of matrix H for the parity
+   equations:
+     Hp[i] = gfpow[25-i] , i out of {0,..,25}
+     Hq[i] = gfpow[44-i] , i out of {0,..,44}
+
+   The logarithm table is the inverse permutation of the power table.
+
+   Some simplifications apply to the implementation:
+   In the world of Galois fields there is no difference between - and +.
+   The term (H[n+1] - H[n]) is constant: 3.
+
+   -------------------------------------------------------------------------
+
+
+                                 Scrambling
+
+   ECMA-130 Annex B prescribes to exor the byte stream of an audio-sized sector
+   with a sequence of pseudo random bytes. It mentions polynomial x^15+x+1 and
+   a 15-bit register.
+   It shows a diagram of a Feedback Shift Register with 16 bit boxes, though.
+ 
+   Comparing this with explanations in 
+     http://www.newwaveinstruments.com/resources/articles/m_sequence_linear_feedback_shift_register_lfsr.htm
+   one can recognize the diagram as a Fibonacci Implementation. But there seems
+   really to be one bit box too many.
+
+   The difference of both lengths is expressed in function next_bit() by
+   the constants 0x3fff,0x4000 for 15 bit versus 0x7fff,0x8000 for 16 bits.
+   Comparing the output of both alternatives with the old scrambler output
+   lets 15 bit win for now.
+
+   So the prescription is to start with 15 bit value 1, to use the lowest bit
+   as output, to shift the bits down by one, to exor the output bit with the
+   next lowest bit, and to put that exor result into bit 14 of the register.
+
+   -------------------------------------------------------------------------
+
+
+                             Correctness Reservation
+
+   In both cases, parity and scrambling, the goal for now is to replicate the
+   output of the dismissed old lec.c by output which is based on published
+   specs and own implementation code. Whether they comply to ECMA-130 is a
+   different question which can only be answered by real test cases for
+   raw CD recording.
+
+   Of course this implementation will be corrected so that it really complies
+   to ECMA-130 as soon as evidence emerges that it does not yet.
+
+*/
+
+
+/* ------------------------------------------------------------------------- */
+
+
+/* Power and logarithm tables for GF(2^8), parity matrices for ECMA-130.
+   Generated by burn_rspc_setup_tables() and burn_rspc_print_tables().
+
+   The highest possible sum of gflog[] values is is 508. So the table gfpow[]
+   with period 255 was manually unrolled to 509 elements to avoid one modulo
+   255 operation in burn_rspc_mult().
+   Proposed by D. Hugh Redelmeier.
+   
+*/
+
+static unsigned char gfpow[509] = {
+	  1,   2,   4,   8,  16,  32,  64, 128,  29,  58, 
+	116, 232, 205, 135,  19,  38,  76, 152,  45,  90, 
+	180, 117, 234, 201, 143,   3,   6,  12,  24,  48, 
+	 96, 192, 157,  39,  78, 156,  37,  74, 148,  53, 
+	106, 212, 181, 119, 238, 193, 159,  35,  70, 140, 
+	  5,  10,  20,  40,  80, 160,  93, 186, 105, 210, 
+	185, 111, 222, 161,  95, 190,  97, 194, 153,  47, 
+	 94, 188, 101, 202, 137,  15,  30,  60, 120, 240, 
+	253, 231, 211, 187, 107, 214, 177, 127, 254, 225, 
+	223, 163,  91, 182, 113, 226, 217, 175,  67, 134, 
+	 17,  34,  68, 136,  13,  26,  52, 104, 208, 189, 
+	103, 206, 129,  31,  62, 124, 248, 237, 199, 147, 
+	 59, 118, 236, 197, 151,  51, 102, 204, 133,  23, 
+	 46,  92, 184, 109, 218, 169,  79, 158,  33,  66, 
+	132,  21,  42,  84, 168,  77, 154,  41,  82, 164, 
+	 85, 170,  73, 146,  57, 114, 228, 213, 183, 115, 
+	230, 209, 191,  99, 198, 145,  63, 126, 252, 229, 
+	215, 179, 123, 246, 241, 255, 227, 219, 171,  75, 
+	150,  49,  98, 196, 149,  55, 110, 220, 165,  87, 
+	174,  65, 130,  25,  50, 100, 200, 141,   7,  14, 
+	 28,  56, 112, 224, 221, 167,  83, 166,  81, 162, 
+	 89, 178, 121, 242, 249, 239, 195, 155,  43,  86, 
+	172,  69, 138,   9,  18,  36,  72, 144,  61, 122, 
+	244, 245, 247, 243, 251, 235, 203, 139,  11,  22, 
+	 44,  88, 176, 125, 250, 233, 207, 131,  27,  54, 
+	108, 216, 173,  71, 142,
+	  1,   2,   4,   8,  16,  32,  64, 128,  29,  58, 
+	116, 232, 205, 135,  19,  38,  76, 152,  45,  90, 
+	180, 117, 234, 201, 143,   3,   6,  12,  24,  48, 
+	 96, 192, 157,  39,  78, 156,  37,  74, 148,  53, 
+	106, 212, 181, 119, 238, 193, 159,  35,  70, 140, 
+	  5,  10,  20,  40,  80, 160,  93, 186, 105, 210, 
+	185, 111, 222, 161,  95, 190,  97, 194, 153,  47, 
+	 94, 188, 101, 202, 137,  15,  30,  60, 120, 240, 
+	253, 231, 211, 187, 107, 214, 177, 127, 254, 225, 
+	223, 163,  91, 182, 113, 226, 217, 175,  67, 134, 
+	 17,  34,  68, 136,  13,  26,  52, 104, 208, 189, 
+	103, 206, 129,  31,  62, 124, 248, 237, 199, 147, 
+	 59, 118, 236, 197, 151,  51, 102, 204, 133,  23, 
+	 46,  92, 184, 109, 218, 169,  79, 158,  33,  66, 
+	132,  21,  42,  84, 168,  77, 154,  41,  82, 164, 
+	 85, 170,  73, 146,  57, 114, 228, 213, 183, 115, 
+	230, 209, 191,  99, 198, 145,  63, 126, 252, 229, 
+	215, 179, 123, 246, 241, 255, 227, 219, 171,  75, 
+	150,  49,  98, 196, 149,  55, 110, 220, 165,  87, 
+	174,  65, 130,  25,  50, 100, 200, 141,   7,  14, 
+	 28,  56, 112, 224, 221, 167,  83, 166,  81, 162, 
+	 89, 178, 121, 242, 249, 239, 195, 155,  43,  86, 
+	172,  69, 138,   9,  18,  36,  72, 144,  61, 122, 
+	244, 245, 247, 243, 251, 235, 203, 139,  11,  22, 
+	 44,  88, 176, 125, 250, 233, 207, 131,  27,  54, 
+	108, 216, 173,  71,
+};
+
+static unsigned char gflog[256] = {
+	   0,   0,   1,  25,   2,  50,  26, 198,   3, 223,
+	  51, 238,  27, 104, 199,  75,   4, 100, 224,  14,
+	  52, 141, 239, 129,  28, 193, 105, 248, 200,   8,
+	  76, 113,   5, 138, 101,  47, 225,  36,  15,  33,
+	  53, 147, 142, 218, 240,  18, 130,  69,  29, 181,
+	 194, 125, 106,  39, 249, 185, 201, 154,   9, 120,
+	  77, 228, 114, 166,   6, 191, 139,  98, 102, 221,
+	  48, 253, 226, 152,  37, 179,  16, 145,  34, 136,
+	  54, 208, 148, 206, 143, 150, 219, 189, 241, 210,
+	  19,  92, 131,  56,  70,  64,  30,  66, 182, 163,
+	 195,  72, 126, 110, 107,  58,  40,  84, 250, 133,
+	 186,  61, 202,  94, 155, 159,  10,  21, 121,  43,
+	  78, 212, 229, 172, 115, 243, 167,  87,   7, 112,
+	 192, 247, 140, 128,  99,  13, 103,  74, 222, 237,
+	  49, 197, 254,  24, 227, 165, 153, 119,  38, 184,
+	 180, 124,  17,  68, 146, 217,  35,  32, 137,  46,
+	  55,  63, 209,  91, 149, 188, 207, 205, 144, 135,
+	 151, 178, 220, 252, 190,  97, 242,  86, 211, 171,
+	  20,  42,  93, 158, 132,  60,  57,  83,  71, 109,
+	  65, 162,  31,  45,  67, 216, 183, 123, 164, 118,
+	 196,  23,  73, 236, 127,  12, 111, 246, 108, 161,
+	  59,  82,  41, 157,  85, 170, 251,  96, 134, 177,
+	 187, 204,  62,  90, 203,  89,  95, 176, 156, 169,
+	 160,  81,  11, 245,  22, 235, 122, 117,  44, 215,
+	  79, 174, 213, 233, 230, 231, 173, 232, 116, 214,
+	 244, 234, 168,  80,  88, 175
+};
+
+
+#define Libburn_use_h_matriceS 1
+
+#ifdef Libburn_use_h_matriceS
+
+/* On my AMD 2x64 bit 3000 MHz processor h[i] costs about 7 % more time
+   than using gfpow[25-i] resp. gfpow[44-1]. I blame this on the more
+   condensed data representation which slightly increases the rate of cache
+   hits.
+   Nevertheless this effect is very likely depending on the exact cache
+   size and architecture. In general, using h[] saves more than 8000
+   subtractions per sector.
+*/
+
+/* Parity matrices H as prescribed by ECMA-130 Annex A.
+   Actually just reverted order start pieces of gfpow[].
+*/
+static unsigned char h26[26] = {
+           3, 143, 201, 234, 117, 180,  90,  45, 152,  76,
+          38,  19, 135, 205, 232, 116,  58,  29, 128,  64,
+          32,  16,   8,   4,   2,   1,
+};
+
+static unsigned char h45[45] = {
+         238, 119, 181, 212, 106,  53, 148,  74,  37, 156,
+          78,  39, 157, 192,  96,  48,  24,  12,   6,   3,
+         143, 201, 234, 117, 180,  90,  45, 152,  76,  38,
+          19, 135, 205, 232, 116,  58,  29, 128,  64,  32,
+          16,   8,   4,   2,   1,
+};
+
+#endif /* Libburn_use_h_matriceS */
+
+
+/* Pseudo-random bytes which of course are exactly the same as with the
+   previously used code.
+   Generated by function print_ecma_130_scrambler().
+*/
+static unsigned char ecma_130_annex_b[2340] = {
+	  1, 128,   0,  96,   0,  40,   0,  30, 128,   8, 
+	 96,   6, 168,   2, 254, 129, 128,  96,  96,  40, 
+	 40,  30, 158, 136, 104, 102, 174, 170, 252, 127, 
+	  1, 224,   0,  72,   0,  54, 128,  22, 224,  14, 
+	200,   4,  86, 131, 126, 225, 224,  72,  72,  54, 
+	182, 150, 246, 238, 198, 204,  82, 213, 253, 159, 
+	  1, 168,   0, 126, 128,  32,  96,  24,  40,  10, 
+	158, 135,  40,  98, 158, 169, 168, 126, 254, 160, 
+	 64, 120,  48,  34, 148,  25, 175,  74, 252,  55, 
+	  1, 214, 128,  94, 224,  56,  72,  18, 182, 141, 
+	182, 229, 182, 203,  54, 215,  86, 222, 190, 216, 
+	112,  90, 164,  59,  59,  83,  83, 125, 253, 225, 
+	129, 136,  96, 102, 168,  42, 254, 159,   0, 104, 
+	  0,  46, 128,  28,  96,   9, 232,   6, 206, 130, 
+	212,  97, 159, 104, 104,  46, 174, 156, 124, 105, 
+	225, 238, 200,  76,  86, 181, 254, 247,   0,  70, 
+	128,  50, 224,  21, 136,  15,  38, 132,  26, 227, 
+	 75,   9, 247,  70, 198, 178, 210, 245, 157, 135, 
+	 41, 162, 158, 249, 168,  66, 254, 177, 128, 116, 
+	 96,  39, 104,  26, 174, 139,  60, 103,  81, 234, 
+	188,  79,  49, 244,  20,  71,  79, 114, 180,  37, 
+	183,  91,  54, 187,  86, 243, 126, 197, 224,  83, 
+	  8,  61, 198, 145, 146, 236, 109, 141, 237, 165, 
+	141, 187,  37, 179,  91,  53, 251,  87,   3, 126, 
+	129, 224,  96,  72,  40,  54, 158, 150, 232, 110, 
+	206, 172,  84, 125, 255,  97, 128,  40,  96,  30, 
+	168,   8, 126, 134, 160,  98, 248,  41, 130, 158, 
+	225, 168,  72, 126, 182, 160, 118, 248,  38, 194, 
+	154, 209, 171,  28, 127,  73, 224,  54, 200,  22, 
+	214, 142, 222, 228,  88,  75, 122, 183,  99,  54, 
+	169, 214, 254, 222, 192,  88,  80,  58, 188,  19, 
+	 49, 205, 212,  85, 159, 127,  40,  32,  30, 152, 
+	  8, 106, 134, 175,  34, 252,  25, 129, 202, 224, 
+	 87,   8,  62, 134, 144,  98, 236,  41, 141, 222, 
+	229, 152,  75,  42, 183,  95,  54, 184,  22, 242, 
+	142, 197, 164,  83,  59, 125, 211,  97, 157, 232, 
+	105, 142, 174, 228, 124,  75,  97, 247, 104,  70, 
+	174, 178, 252, 117, 129, 231,  32,  74, 152,  55, 
+	 42, 150, 159,  46, 232,  28,  78, 137, 244, 102, 
+	199, 106, 210, 175,  29, 188,   9, 177, 198, 244, 
+	 82, 199, 125, 146, 161, 173, 184, 125, 178, 161, 
+	181, 184, 119,  50, 166, 149, 186, 239,  51,  12, 
+	 21, 197, 207,  19,  20,  13, 207,  69, 148,  51, 
+	 47,  85, 220,  63,  25, 208,  10, 220,   7,  25, 
+	194, 138, 209, 167,  28, 122, 137, 227,  38, 201, 
+	218, 214, 219,  30, 219,  72,  91, 118, 187, 102, 
+	243, 106, 197, 239,  19,  12,  13, 197, 197, 147, 
+	 19,  45, 205, 221, 149, 153, 175,  42, 252,  31, 
+	  1, 200,   0,  86, 128,  62, 224,  16,  72,  12, 
+	 54, 133, 214, 227,  30, 201, 200,  86, 214, 190, 
+	222, 240,  88,  68,  58, 179,  83,  53, 253, 215, 
+	  1, 158, 128, 104,  96,  46, 168,  28, 126, 137, 
+	224, 102, 200,  42, 214, 159,  30, 232,   8,  78, 
+	134, 180,  98, 247, 105, 134, 174, 226, 252,  73, 
+	129, 246, 224,  70, 200,  50, 214, 149, 158, 239, 
+	 40,  76,  30, 181, 200, 119,  22, 166, 142, 250, 
+	228,  67,  11, 113, 199, 100,  82, 171, 125, 191, 
+	 97, 176,  40, 116,  30, 167,  72, 122, 182, 163, 
+	 54, 249, 214, 194, 222, 209, 152,  92, 106, 185, 
+	239,  50, 204,  21, 149, 207,  47,  20,  28,  15, 
+	 73, 196,  54, 211,  86, 221, 254, 217, 128,  90, 
+	224,  59,   8,  19,  70, 141, 242, 229, 133, 139, 
+	 35,  39,  89, 218, 186, 219,  51,  27,  85, 203, 
+	127,  23,  96,  14, 168,   4, 126, 131,  96,  97, 
+	232,  40,  78, 158, 180, 104, 119, 110, 166, 172, 
+	122, 253, 227,   1, 137, 192, 102, 208,  42, 220, 
+	 31,  25, 200,  10, 214, 135,  30, 226, 136,  73, 
+	166, 182, 250, 246, 195,   6, 209, 194, 220,  81, 
+	153, 252, 106, 193, 239,  16,  76,  12,  53, 197, 
+	215,  19,  30, 141, 200, 101, 150, 171,  46, 255, 
+	 92,  64,  57, 240,  18, 196,  13, 147,  69, 173, 
+	243,  61, 133, 209, 163,  28, 121, 201, 226, 214, 
+	201, 158, 214, 232,  94, 206, 184,  84, 114, 191, 
+	101, 176,  43,  52,  31,  87,  72,  62, 182, 144, 
+	118, 236,  38, 205, 218, 213, 155,  31,  43,  72, 
+	 31, 118, 136,  38, 230, 154, 202, 235,  23,  15, 
+	 78, 132,  52,  99,  87, 105, 254, 174, 192, 124, 
+	 80,  33, 252,  24,  65, 202, 176,  87,  52,  62, 
+	151,  80, 110, 188,  44, 113, 221, 228,  89, 139, 
+	122, 231,  99,  10, 169, 199,  62, 210, 144,  93, 
+	172,  57, 189, 210, 241, 157, 132, 105, 163, 110, 
+	249, 236,  66, 205, 241, 149, 132, 111,  35, 108, 
+	 25, 237, 202, 205, 151,  21, 174, 143,  60, 100, 
+	 17, 235,  76,  79, 117, 244,  39,   7,  90, 130, 
+	187,  33, 179,  88, 117, 250, 167,   3,  58, 129, 
+	211,  32,  93, 216,  57, 154, 146, 235,  45, 143, 
+	 93, 164,  57, 187,  82, 243, 125, 133, 225, 163, 
+	  8, 121, 198, 162, 210, 249, 157, 130, 233, 161, 
+	142, 248, 100,  66, 171, 113, 191, 100, 112,  43, 
+	100,  31, 107,  72,  47, 118, 156,  38, 233, 218, 
+	206, 219,  20,  91,  79, 123, 116,  35, 103,  89, 
+	234, 186, 207,  51,  20,  21, 207,  79,  20,  52, 
+	 15,  87,  68,  62, 179,  80, 117, 252,  39,   1, 
+	218, 128,  91,  32,  59,  88,  19, 122, 141, 227, 
+	 37, 137, 219,  38, 219,  90, 219, 123,  27,  99, 
+	 75, 105, 247, 110, 198, 172,  82, 253, 253, 129, 
+	129, 160,  96, 120,  40,  34, 158, 153, 168, 106, 
+	254, 175,   0, 124,   0,  33, 192,  24,  80,  10, 
+	188,   7,  49, 194, 148,  81, 175, 124, 124,  33, 
+	225, 216,  72,  90, 182, 187,  54, 243,  86, 197, 
+	254, 211,   0,  93, 192,  57, 144,  18, 236,  13, 
+	141, 197, 165, 147,  59,  45, 211,  93, 157, 249, 
+	169, 130, 254, 225, 128,  72,  96,  54, 168,  22, 
+	254, 142, 192, 100,  80,  43, 124,  31,  97, 200, 
+	 40,  86, 158, 190, 232, 112,  78, 164,  52, 123, 
+	 87,  99, 126, 169, 224, 126, 200,  32,  86, 152, 
+	 62, 234, 144,  79,  44,  52,  29, 215,  73, 158, 
+	182, 232, 118, 206, 166, 212, 122, 223,  99,  24, 
+	 41, 202, 158, 215,  40,  94, 158, 184, 104, 114, 
+	174, 165, 188, 123,  49, 227,  84,  73, 255, 118, 
+	192,  38, 208,  26, 220,  11,  25, 199,  74, 210, 
+	183,  29, 182, 137, 182, 230, 246, 202, 198, 215, 
+	 18, 222, 141, 152, 101, 170, 171,  63,  63,  80, 
+	 16,  60,  12,  17, 197, 204,  83,  21, 253, 207, 
+	  1, 148,   0, 111,  64,  44,  48,  29, 212,   9, 
+	159,  70, 232,  50, 206, 149, 148, 111,  47, 108, 
+	 28,  45, 201, 221, 150, 217, 174, 218, 252,  91, 
+	  1, 251,  64,  67, 112,  49, 228,  20,  75,  79, 
+	119, 116,  38, 167,  90, 250, 187,   3,  51,  65, 
+	213, 240,  95,   4,  56,   3,  82, 129, 253, 160, 
+	 65, 184,  48, 114, 148,  37, 175,  91,  60,  59, 
+	 81, 211, 124,  93, 225, 249, 136,  66, 230, 177, 
+	138, 244, 103,   7, 106, 130, 175,  33, 188,  24, 
+	113, 202, 164,  87,  59, 126, 147,  96, 109, 232, 
+	 45, 142, 157, 164, 105, 187, 110, 243, 108,  69, 
+	237, 243,  13, 133, 197, 163,  19,  57, 205, 210, 
+	213, 157, 159,  41, 168,  30, 254, 136,  64, 102, 
+	176,  42, 244,  31,   7,  72,   2, 182, 129, 182, 
+	224, 118, 200,  38, 214, 154, 222, 235,  24,  79, 
+	 74, 180,  55,  55,  86, 150, 190, 238, 240,  76, 
+	 68,  53, 243,  87,   5, 254, 131,   0,  97, 192, 
+	 40,  80,  30, 188,   8, 113, 198, 164,  82, 251, 
+	125, 131,  97, 161, 232, 120,  78, 162, 180, 121, 
+	183,  98, 246, 169, 134, 254, 226, 192,  73, 144, 
+	 54, 236,  22, 205, 206, 213, 148,  95,  47, 120, 
+	 28,  34, 137, 217, 166, 218, 250, 219,   3,  27, 
+	 65, 203, 112,  87, 100,  62, 171,  80, 127, 124, 
+	 32,  33, 216,  24,  90, 138, 187,  39,  51,  90, 
+	149, 251,  47,   3,  92,   1, 249, 192,  66, 208, 
+	 49, 156,  20, 105, 207, 110, 212,  44,  95,  93, 
+	248,  57, 130, 146, 225, 173, 136, 125, 166, 161, 
+	186, 248, 115,   2, 165, 193, 187,  16, 115,  76, 
+	 37, 245, 219,   7,  27,  66, 139, 113, 167, 100, 
+	122, 171,  99,  63, 105, 208,  46, 220,  28,  89, 
+	201, 250, 214, 195,  30, 209, 200,  92,  86, 185, 
+	254, 242, 192,  69, 144,  51,  44,  21, 221, 207, 
+	 25, 148,  10, 239,  71,  12,  50, 133, 213, 163, 
+	 31,  57, 200,  18, 214, 141, 158, 229, 168,  75, 
+	 62, 183,  80, 118, 188,  38, 241, 218, 196,  91, 
+	 19, 123,  77, 227, 117, 137, 231,  38, 202, 154, 
+	215,  43,  30, 159,  72, 104,  54, 174, 150, 252, 
+	110, 193, 236,  80,  77, 252,  53, 129, 215,  32, 
+	 94, 152,  56, 106, 146, 175,  45, 188,  29, 177, 
+	201, 180,  86, 247, 126, 198, 160,  82, 248,  61, 
+	130, 145, 161, 172, 120, 125, 226, 161, 137, 184, 
+	102, 242, 170, 197, 191,  19,  48,  13, 212,   5, 
+	159,  67,  40,  49, 222, 148,  88, 111, 122, 172, 
+	 35,  61, 217, 209, 154, 220, 107,  25, 239,  74, 
+	204,  55,  21, 214, 143,  30, 228,   8,  75,  70, 
+	183, 114, 246, 165, 134, 251,  34, 195,  89, 145, 
+	250, 236,  67,  13, 241, 197, 132,  83,  35, 125, 
+	217, 225, 154, 200, 107,  22, 175,  78, 252,  52, 
+	 65, 215, 112,  94, 164,  56, 123,  82, 163, 125, 
+	185, 225, 178, 200, 117, 150, 167,  46, 250, 156, 
+	 67,  41, 241, 222, 196,  88,  83, 122, 189, 227, 
+	 49, 137, 212, 102, 223, 106, 216,  47,  26, 156, 
+	 11,  41, 199,  94, 210, 184,  93, 178, 185, 181, 
+	178, 247,  53, 134, 151,  34, 238, 153, 140, 106, 
+	229, 239,  11,  12,   7,  69, 194, 179,  17, 181, 
+	204, 119,  21, 230, 143,  10, 228,   7,  11,  66, 
+	135, 113, 162, 164, 121, 187,  98, 243, 105, 133, 
+	238, 227,  12,  73, 197, 246, 211,   6, 221, 194, 
+	217, 145, 154, 236, 107,  13, 239,  69, 140,  51, 
+	 37, 213, 219,  31,  27,  72,  11, 118, 135, 102, 
+	226, 170, 201, 191,  22, 240,  14, 196,   4,  83, 
+	 67, 125, 241, 225, 132,  72,  99, 118, 169, 230, 
+	254, 202, 192,  87,  16,  62, 140,  16, 101, 204, 
+	 43,  21, 223,  79,  24,  52,  10, 151,  71,  46, 
+	178, 156, 117, 169, 231,  62, 202, 144,  87,  44, 
+	 62, 157, 208, 105, 156,  46, 233, 220,  78, 217, 
+	244,  90, 199, 123,  18, 163,  77, 185, 245, 178, 
+	199,  53, 146, 151,  45, 174, 157, 188, 105, 177, 
+	238, 244,  76,  71, 117, 242, 167,   5, 186, 131, 
+	 51,  33, 213, 216,  95,  26, 184,  11,  50, 135, 
+	 85, 162, 191,  57, 176,  18, 244,  13, 135,  69, 
+	162, 179,  57, 181, 210, 247,  29, 134, 137, 162, 
+	230, 249, 138, 194, 231,  17, 138, 140, 103,  37, 
+	234, 155,  15,  43,  68,  31, 115,  72,  37, 246, 
+	155,   6, 235,  66, 207, 113, 148,  36, 111,  91, 
+	108,  59, 109, 211, 109, 157, 237, 169, 141, 190, 
+	229, 176,  75,  52,  55,  87,  86, 190, 190, 240, 
+	112,  68,  36,  51,  91,  85, 251, 127,   3,  96, 
+	  1, 232,   0,  78, 128,  52,  96,  23, 104,  14, 
+	174, 132, 124,  99,  97, 233, 232,  78, 206, 180, 
+	 84, 119, 127, 102, 160,  42, 248,  31,   2, 136, 
+	  1, 166, 128, 122, 224,  35,   8,  25, 198, 138, 
+	210, 231,  29, 138, 137, 167,  38, 250, 154, 195, 
+	 43,  17, 223,  76,  88,  53, 250, 151,   3,  46, 
+	129, 220,  96,  89, 232,  58, 206, 147,  20, 109, 
+	207, 109, 148,  45, 175,  93, 188,  57, 177, 210, 
+	244,  93, 135, 121, 162, 162, 249, 185, 130, 242, 
+	225, 133, 136,  99,  38, 169, 218, 254, 219,   0, 
+	 91,  64,  59, 112,  19, 100,  13, 235,  69, 143, 
+	115,  36,  37, 219,  91,  27, 123,  75,  99, 119, 
+	105, 230, 174, 202, 252,  87,   1, 254, 128,  64, 
+	 96,  48,  40,  20,  30, 143,  72, 100,  54, 171, 
+	 86, 255, 126, 192,  32,  80,  24,  60,  10, 145, 
+	199,  44,  82, 157, 253, 169, 129, 190, 224, 112, 
+	 72,  36,  54, 155,  86, 235, 126, 207,  96,  84, 
+	 40,  63,  94, 144,  56, 108,  18, 173, 205, 189, 
+	149, 177, 175,  52, 124,  23,  97, 206, 168,  84, 
+	126, 191,  96, 112,  40,  36,  30, 155,  72, 107, 
+	118, 175, 102, 252,  42, 193, 223,  16,  88,  12, 
+	 58, 133, 211,  35,  29, 217, 201, 154, 214, 235, 
+	 30, 207,  72,  84,  54, 191,  86, 240,  62, 196, 
+	 16,  83,  76,  61, 245, 209, 135,  28,  98, 137, 
+	233, 166, 206, 250, 212,  67,  31, 113, 200,  36, 
+	 86, 155, 126, 235,  96,  79, 104,  52,  46, 151, 
+	 92, 110, 185, 236, 114, 205, 229, 149, 139,  47, 
+	 39,  92,  26, 185, 203,  50, 215,  85, 158, 191, 
+	 40, 112,  30, 164,   8, 123,  70, 163, 114, 249, 
+	229, 130, 203,  33, 151,  88, 110, 186, 172, 115, 
+	 61, 229, 209, 139,  28, 103,  73, 234, 182, 207, 
+	 54, 212,  22, 223,  78, 216,  52,  90, 151, 123, 
+	 46, 163,  92, 121, 249, 226, 194, 201, 145, 150, 
+	236, 110, 205, 236,  85, 141, 255,  37, 128,  27, 
+	 32,  11,  88,   7, 122, 130, 163,  33, 185, 216, 
+	114, 218, 165, 155,  59,  43,  83,  95, 125, 248, 
+	 33, 130, 152,  97, 170, 168, 127,  62, 160,  16, 
+	120,  12,  34, 133, 217, 163,  26, 249, 203,   2, 
+	215,  65, 158, 176, 104, 116,  46, 167,  92, 122, 
+	185, 227,  50, 201, 213, 150, 223,  46, 216,  28, 
+	 90, 137, 251,  38, 195,  90, 209, 251,  28,  67, 
+	 73, 241, 246, 196,  70, 211, 114, 221, 229, 153
+};
+
+
+/* ------------------------------------------------------------------------- */
+
+
+/* This is the new implementation of P- and Q-parity generation.
+   It needs about the same computing time as the old implementation (both
+   with gcc -O2 on AMD 64 bit). Measurements indicate that about 280 MIPS
+   are needed for 48x CD speed (7.1 MB/s).
+*/
+
+static unsigned char burn_rspc_mult(unsigned char a, unsigned char b)
+{
+	if (a == 0 || b == 0)
+		return 0;
+	/* Optimization of (a == 0 || b == 0) by D. Hugh Redelmeier
+	if((((int)a - 1) | ((int)b - 1)) < 0)
+		return 0;
+	*/
+
+        return gfpow[gflog[a] + gflog[b]];
+	/* % 255 not necessary because gfpow is unrolled up to index 510 */
+}
+
+
+/* Divide by polynomial 0x03. Derived from burn_rspc_div() and using the
+   unrolled size of the gfpow[] array.
+*/
+static unsigned char burn_rspc_div_3(unsigned char a)
+{
+	if (a == 0)
+		return 0;
+	return gfpow[230 + gflog[a]];
+}
+
+
+static void burn_rspc_p0p1(unsigned char *sector, int col, 
+                          unsigned char *p0_lsb, unsigned char *p0_msb,
+                          unsigned char *p1_lsb, unsigned char *p1_msb)
+{
+	unsigned char *start, b;
+	unsigned int i, sum_v_lsb = 0, sum_v_msb = 0;
+	unsigned int hxv_lsb = 0, hxv_msb = 0;
+
+	start = sector + 12 + 2 * col;
+	for(i = 0; i < 24; i++) {
+		b = *start;
+		sum_v_lsb ^= b;
+
+#ifdef Libburn_use_h_matriceS
+		hxv_lsb ^= burn_rspc_mult(b, h26[i]);
+#else
+		hxv_lsb ^= burn_rspc_mult(b, gfpow[25 - i]);
+#endif
+
+		b = *(start + 1);
+		sum_v_msb ^= b;
+
+#ifdef Libburn_use_h_matriceS
+		hxv_msb ^= burn_rspc_mult(b, h26[i]);
+#else
+		hxv_msb ^= burn_rspc_mult(b, gfpow[25 - i]);
+#endif
+
+		start += 86;
+	}
+
+				/* 3 = gfpow[1] ^ gfpow[0] , 2 = gfpow[1] */
+	*p0_lsb = burn_rspc_div_3(burn_rspc_mult(2, sum_v_lsb) ^ hxv_lsb);
+	*p0_msb = burn_rspc_div_3(burn_rspc_mult(2, sum_v_msb) ^ hxv_msb);
+	*p1_lsb = sum_v_lsb ^ *p0_lsb;
+	*p1_msb = sum_v_msb ^ *p0_msb;
+}
+
+
+void burn_rspc_parity_p(unsigned char *sector)
+{
+	int i;
+	unsigned char p0_lsb, p0_msb, p1_lsb, p1_msb;
+
+	/* Loop over P columns */
+	for(i = 0; i < 43; i++) {
+		burn_rspc_p0p1(sector, i, &p0_lsb, &p0_msb, &p1_lsb, &p1_msb);
+		sector[2162 + 2 * i]     =  p0_lsb;
+		sector[2162 + 2 * i + 1] =  p0_msb;
+		sector[2076 + 2 * i]     =  p1_lsb;
+		sector[2076 + 2 * i + 1] =  p1_msb;
+
+#ifdef Libburn_with_lec_generatoR
+		if(verbous) {
+			printf("p %2d :  %2.2X  %2.2X  ", i,
+				(unsigned int) p0_lsb, (unsigned int) p0_msb);
+			printf("%2.2X  %2.2X  ",
+				(unsigned int) p1_lsb, (unsigned int) p1_msb);
+			printf("-> %d,%d\n", 2162 + 2 * i, 2076 + 2 * i);
+		}
+#endif /* Libburn_with_lec_generatoR */
+
+	}
+}
+
+
+static void burn_rspc_q0q1(unsigned char *sector, int diag,
+                          unsigned char *q0_lsb, unsigned char *q0_msb,
+                          unsigned char *q1_lsb, unsigned char *q1_msb)
+{
+	unsigned char *start, b;
+	unsigned int i, idx, sum_v_lsb = 0, sum_v_msb = 0;
+	unsigned int hxv_lsb = 0, hxv_msb = 0;
+
+	start = sector + 12;
+	idx = 2 * 43 * diag;
+	for(i = 0; i < 43; i++) {
+		if (idx >= 2236)
+			idx -= 2236;
+		b = start[idx];
+		sum_v_lsb ^= b;
+
+#ifdef Libburn_use_h_matriceS
+		hxv_lsb ^= burn_rspc_mult(b, h45[i]);
+#else
+		hxv_lsb ^= burn_rspc_mult(b, gfpow[44 - i]);
+#endif
+
+		b = start[idx + 1];
+		sum_v_msb ^= b;
+
+#ifdef Libburn_use_h_matriceS
+		hxv_msb ^= burn_rspc_mult(b, h45[i]);
+#else
+		hxv_msb ^= burn_rspc_mult(b, gfpow[44 - i]);
+#endif
+
+		idx += 88;
+	}
+				/* 3 = gfpow[1] ^ gfpow[0] , 2 = gfpow[1] */
+	*q0_lsb = burn_rspc_div_3(burn_rspc_mult(2, sum_v_lsb) ^ hxv_lsb);
+	*q0_msb = burn_rspc_div_3(burn_rspc_mult(2, sum_v_msb) ^ hxv_msb);
+	*q1_lsb = sum_v_lsb ^ *q0_lsb;
+	*q1_msb = sum_v_msb ^ *q0_msb;
+}
+
+
+void burn_rspc_parity_q(unsigned char *sector)
+{
+	int i;
+	unsigned char q0_lsb, q0_msb, q1_lsb, q1_msb;
+
+	/* Loop over Q diagonals */
+	for(i = 0; i < 26; i++) {
+		burn_rspc_q0q1(sector, i, &q0_lsb, &q0_msb, &q1_lsb, &q1_msb);
+		sector[2300 + 2 * i]     =  q0_lsb;
+		sector[2300 + 2 * i + 1] =  q0_msb;
+		sector[2248 + 2 * i]     =  q1_lsb;
+		sector[2248 + 2 * i + 1] =  q1_msb;
+
+#ifdef Libburn_with_lec_generatoR
+		if(verbous) {
+			printf("q %2d :  %2.2X  %2.2X  ", i,
+				(unsigned int) q0_lsb, (unsigned int) q0_msb);
+			printf("%2.2X  %2.2X  ",
+				(unsigned int) q1_lsb, (unsigned int) q1_msb);
+			printf("-> %d,%d\n", 2300 + 2 * i, 2248 + 2 * i);
+		}
+#endif /* Libburn_with_lec_generatoR */
+
+	}
+}
+
+/* ------------------------------------------------------------------------- */
+
+
+/* The new implementation of the ECMA-130 Annex B scrambler.
+   It is totally unoptimized. One should make use of larger word operations. 
+   Measurements indicate that about 50 MIPS are needed for 48x CD speed.
+*/
+
+void burn_ecma130_scramble(unsigned char *sector) 
+{
+        int i;
+	unsigned char *s;
+
+	s = sector + 12;
+        for (i = 0; i < 2340; i++)
+                s[i] ^= ecma_130_annex_b[i];
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+
+/* The following code is not needed for libburn but rather documents the
+   origin of the tables above. In libburn it will not be compiled.
+*/
+
+
+#ifdef Libburn_with_lec_generatoR
+
+
+/* This function produced the content of gflog[] and gfpow[]
+*/
+static int burn_rspc_setup_tables(void)
+{
+	unsigned int b, l;
+
+	memset(gflog, 0, sizeof(gflog));
+	memset(gfpow, 0, sizeof(gfpow));
+	b = 1;
+	for (l = 0; l < 255; l++) {
+		gfpow[l] = (unsigned char) b;
+		gflog[b] = (unsigned char) l;
+		b = b << 1;
+		if (b & 256)
+			b = b ^ 0x11d;
+	}
+	return 0;
+}
+
+
+/* This function printed the content of gflog[] and gfpow[] as C code
+   and compared the content with the tables of the old implementation.
+   h26[] and h45[] are reverted order copies of gfpow[]
+*/
+static int burn_rspc_print_tables(void)
+{
+ int i;
+
+ printf("static unsigned char gfpow[255] = {");
+ printf("\n\t"); 
+ for(i= 0; i < 255; i++) {
+   printf("%3u, ", gfpow[i]);
+
+#ifdef Libburn_with_old_lec_comparisoN
+   if(gfpow[i] != gf8_ilog[i])
+     fprintf(stderr, "*** ILOG %d : %d != %d ***\n", i, gfpow[i], gf8_ilog[i]);
+#endif
+
+   if((i % 10) == 9)
+     printf("\n\t"); 
+ }
+ printf("\n};\n\n");
+
+ printf("static unsigned char gflog[256] = {");
+ printf("\n\t"); 
+ for(i= 0; i < 256; i++) {
+   printf(" %3u,", gflog[i]);
+
+#ifdef Libburn_with_old_lec_comparisoN
+   if(gflog[i] != gf8_log[i])
+     fprintf(stderr, "*** LOG %d : %d != %d ***\n", i, gflog[i], gf8_log[i]);
+#endif
+
+   if((i % 10) == 9)
+     printf("\n\t"); 
+ }
+ printf("\n};\n\n");
+
+ printf("static unsigned char h26[26] = {");
+ printf("\n\t");
+ for(i= 0; i < 26; i++) {
+   printf(" %3u,", gfpow[25 - i]);
+   if((i % 10) == 9)
+     printf("\n\t"); 
+ }
+ printf("\n};\n\n");
+
+ printf("static unsigned char h45[45] = {");
+ printf("\n\t");
+ for(i= 0; i < 45; i++) {
+   printf(" %3u,",gfpow[44 - i]);
+   if((i % 10) == 9)
+     printf("\n\t"); 
+ }
+ printf("\n};\n\n");
+
+ return 0;
+}
+
+
+/* This code was used to generate the content of array ecma_130_annex_b[].
+*/
+static unsigned short ecma_130_fsr = 1;
+
+static int next_bit(void)
+{
+	int ret;
+
+	ret = ecma_130_fsr & 1;
+	ecma_130_fsr = (ecma_130_fsr >> 1) & 0x3fff;
+	if (ret ^ (ecma_130_fsr & 1))
+		ecma_130_fsr |= 0x4000;
+	return ret;
+}
+
+
+static int print_ecma_130_scrambler(void)
+{
+	int i, j, b;
+
+	ecma_130_fsr = 1;
+	printf("static unsigned char ecma_130_annex_b[2340] = {");
+	printf("\n\t");
+	for (i = 0; i < 2340; i++) {
+		b = 0;
+		for (j = 0; j < 8; j++)
+			b |= next_bit() << j;
+
+		printf("%3u, ", b);
+		if ((i % 10) == 9)
+			printf("\n\t");
+	}
+	printf("\n};\n");
+	return 1;
+}
+
+
+#ifdef Libburn_with_general_rspc_diV
+
+/* This is a general polynomial division function.
+   burn_rspc_div_3() has been derived from this by setting b to constant 3.
+*/
+static unsigned char burn_rspc_div(unsigned char a, unsigned char b)
+{
+	int d;
+
+	if (a == 0)
+		return 0;
+	if (b == 0)
+		return -1;
+	d = gflog[a] - gflog[b];
+	if (d < 0)
+		d += 255;
+	return gfpow[d];
+}
+
+#endif /* Libburn_with_general_rspc_diV */
+
+
+#endif /* Libburn_with_lec_generatoR */
+

libburn/ecma130ab.h

@@ -0,0 +1,23 @@
+
+/* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */
+
+/* ts A91016 : libburn/ecma130ab.h is the replacement for old libburn/lec.h
+
+   Copyright 2009, Thomas Schmitt <scdbackup@gmx.net>, libburnia-project.org
+
+   This code module implements the computations prescribed in ECMA-130 Annex A
+   and B. For explanations of the underlying mathematics see ecma130ab.c .
+
+*/
+
+#ifndef Libburn_ecma130ab_includeD
+#define Libburn_ecma130ab_includeD 1
+
+void burn_rspc_parity_p(unsigned char *sector);
+
+void burn_rspc_parity_q(unsigned char *sector);
+
+void burn_ecma130_scramble(unsigned char *sector);
+
+#endif /* ! Libburn_ecma130ab_includeD */
+

libburn/file.c

@@ -1,5 +1,6 @@
 /* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */
 
+
 #include <stdlib.h>
 #include <sys/types.h>
 #include <stdio.h>
@@ -27,8 +28,6 @@ an unreadable disc */
 /* This is a generic OS oriented function wrapper which compensates
    shortcommings of read() in respect to a guaranteed amount of return data.
    See  man 2 read , paragraph "RETURN VALUE".
-   Possibly libburn/file.c is not the right storage location for this.
-   To make it ready for a move, this function is not declared static.
 */
 static int read_full_buffer(int fd, unsigned char *buffer, int size)
 {
@@ -211,7 +210,7 @@ static int fifo_read(struct burn_source *source,
 		     int size)
 {
 	struct burn_source_fifo *fs = source->data;
-	int ret, todo, rpos, bufsize, diff;
+	int ret, todo, rpos, bufsize, diff, counted = 0;
 
 	if (fs->end_of_consumption) {
 		/* ??? msg: reading has been ended already */;
@@ -256,6 +255,9 @@ static int fifo_read(struct burn_source *source,
 				   "Forwarded input error ends output", 0, 0);
 				return -1;
 			}
+			if (!counted)
+				fs->empty_counter++;
+			counted = 1;
 			fifo_sleep(0);
 		}
 		diff = fs->buf_writepos - rpos; /* read volatile only once */
@@ -285,6 +287,7 @@ static int fifo_read(struct burn_source *source,
 		(size - todo), fs->buf_readpos, (double) fs->out_counter);
 */
 
+	fs->get_counter++;
 	return (size - todo);
 }
 
@@ -312,8 +315,10 @@ static void fifo_free(struct burn_source *source)
 	burn_fifo_abort(fs, 0);
 	if (fs->inp != NULL)
 		burn_source_free(fs->inp);
+
 	if (fs->buf != NULL)
-		free(fs->buf);
+		burn_os_free_buffer(fs->buf,
+			((size_t) fs->chunksize) * (size_t) fs->chunks, 0);
 	free((char *) fs);
 }
 
@@ -321,7 +326,8 @@ static void fifo_free(struct burn_source *source)
 int burn_fifo_source_shoveller(struct burn_source *source, int flag)
 {
 	struct burn_source_fifo *fs = source->data;
-	int ret, bufsize, diff, wpos, rpos, trans_end, free_bytes;
+	int ret, bufsize, diff, wpos, rpos, trans_end, free_bytes, fill;
+	int counted;
 	char *bufpt;
 	pthread_t thread_handle_storage;
 
@@ -335,6 +341,7 @@ int burn_fifo_source_shoveller(struct burn_source *source, int flag)
 
 		/* wait for enough buffer space available */
 		wpos = fs->buf_writepos;
+		counted = 0;
 		while (1) {
 			rpos = fs->buf_readpos;
 			diff = rpos - wpos;
@@ -345,18 +352,28 @@ int burn_fifo_source_shoveller(struct burn_source *source, int flag)
 				free_bytes = diff - 1;
 			else {
 				free_bytes = (bufsize - wpos) + rpos - 1;
-				if (bufsize - wpos < fs->chunksize)
+				if (bufsize - wpos < fs->inp_read_size)
 					trans_end = 1;
 			}
-			if (free_bytes >= fs->chunksize)
+			if (free_bytes >= fs->inp_read_size)
 		break;
+			if (!counted)
+				fs->full_counter++;
+			counted = 1;
 			fifo_sleep(0);
 		}
 
+		fill = bufsize - free_bytes - 1;
+		if (fill < fs->total_min_fill)
+			fs->total_min_fill = fill;
+		if (fill < fs->interval_min_fill)
+			fs->interval_min_fill = fill;
+
 		/* prepare the receiving memory */
 		bufpt = fs->buf + wpos;
 		if (trans_end) {
-			bufpt = calloc(fs->chunksize, 1);
+			bufpt = burn_os_alloc_buffer(
+					(size_t) fs->inp_read_size, 0);
 			if (bufpt == NULL) {
 				libdax_msgs_submit(libdax_messenger, -1,
 				  0x00000003,
@@ -370,15 +387,13 @@ int burn_fifo_source_shoveller(struct burn_source *source, int flag)
 		/* Obtain next chunk */
 		if (fs->inp->read != NULL)
 			ret = fs->inp->read(fs->inp,
-				 (unsigned char *) bufpt, fs->chunksize);
+				 (unsigned char *) bufpt, fs->inp_read_size);
 		else
 			ret = fs->inp->read_xt( fs->inp,
-				 (unsigned char *) bufpt, fs->chunksize);
-		if (ret > 0)
-			fs->in_counter += ret;
-		else if (ret == 0)
+				 (unsigned char *) bufpt, fs->inp_read_size);
+		if (ret == 0)
 	break; /* EOF */
-		else {
+		else if (ret < 0) {
 			libdax_msgs_submit(libdax_messenger, -1, 0x00020153,
 				 LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
 				"Read error on fifo input", errno, 0);
@@ -387,17 +402,21 @@ int burn_fifo_source_shoveller(struct burn_source *source, int flag)
 				fs->input_error = EIO;
 	break;
 		}
+		fs->in_counter += ret;
+		fs->put_counter++;
 
 		/* activate read chunk */
-		if (ret > fs->chunksize) /* beware of ill custom burn_source */
-			ret = fs->chunksize;
+		if (ret > fs->inp_read_size)
+					/* beware of ill custom burn_source */
+			ret = fs->inp_read_size;
 		if (trans_end) {
 			/* copy to end of buffer */
 			memcpy(fs->buf + wpos, bufpt, bufsize - wpos);
 			/* copy to start of buffer */
 			memcpy(fs->buf, bufpt + (bufsize - wpos),
-				fs->chunksize - (bufsize - wpos));
-			free(bufpt);
+				fs->inp_read_size - (bufsize - wpos));
+			burn_os_free_buffer(bufpt, (size_t) fs->inp_read_size,
+						0);
 			if (ret >= bufsize - wpos)
 				fs->buf_writepos = ret - (bufsize - wpos);
 			else
@@ -433,7 +452,9 @@ int burn_fifo_source_shoveller(struct burn_source *source, int flag)
 	   So in both cases the consumer is aware that reading is futile
 	   or even fatal.
 	*/
-	free(fs->buf); /* Give up fifo buffer. Next fifo might start soon. */
+	if(fs->buf != NULL)
+		burn_os_free_buffer(fs->buf,
+			((size_t) fs->chunksize) * (size_t) fs->chunks, 0);
 	fs->buf = NULL;
 
 	fs->thread_handle= NULL;
@@ -450,7 +471,9 @@ int burn_fifo_cancel(struct burn_source *source)
 	return(1);
 }
 
-
+/*
+   @param flag bit0= allow larger read chunks
+*/
 struct burn_source *burn_fifo_source_new(struct burn_source *inp,
 		 		int chunksize, int chunks, int flag)
 {
@@ -477,6 +500,10 @@ struct burn_source *burn_fifo_source_new(struct burn_source *inp,
 	fs->thread_pid = 0;
 	fs->thread_is_valid = 0;
 	fs->inp = NULL; /* set later */
+	if (flag & 1)
+		fs->inp_read_size = 32 * 1024;
+	else
+		fs->inp_read_size = chunksize;
 	fs->chunksize = chunksize;
 	fs->chunks = chunks;
 	fs->buf = NULL;
@@ -485,6 +512,9 @@ struct burn_source *burn_fifo_source_new(struct burn_source *inp,
 	fs->input_error = 0;
 	fs->end_of_consumption = 0;
 	fs->in_counter = fs->out_counter = 0;
+	fs->total_min_fill = fs->interval_min_fill = 0;
+	fs->put_counter = fs->get_counter = 0;
+	fs->empty_counter = fs->full_counter = 0;
 
 	src = burn_source_new();
 	if (src == NULL) {
@@ -550,34 +580,89 @@ int burn_fifo_inquire_status(struct burn_source *source,
 }
 
 
-int burn_fifo_peek_data(struct burn_source *source, char *buf, int bufsize,
+/* ts A91125 : API */
+void burn_fifo_get_statistics(struct burn_source *source,
+                             int *total_min_fill, int *interval_min_fill,
+                             int *put_counter, int *get_counter,
+                             int *empty_counter, int *full_counter)
+{
+	struct burn_source_fifo *fs = source->data;
+
+	*total_min_fill = fs->total_min_fill;
+	*interval_min_fill = fs->interval_min_fill;
+	*put_counter = fs->put_counter;
+	*get_counter = fs->get_counter;
+	*empty_counter = fs->empty_counter;
+	*full_counter = fs->full_counter;
+}
+
+
+/* ts A91125 : API */
+void burn_fifo_next_interval(struct burn_source *source,
+                            int *interval_min_fill)
+{ 
+	struct burn_source_fifo *fs = source->data;
+	int size, free_bytes, ret;
+	char *status_text;
+
+	*interval_min_fill = fs->interval_min_fill;
+	ret = burn_fifo_inquire_status(source,
+					 &size, &free_bytes, &status_text);	
+	fs->interval_min_fill = size - free_bytes - 1;
+}
+
+
+/* @param flag bit0= do not copy to buf but only wait until the fifo has read
+                     bufsize or input ended.
+                     The same happens if buf is NULL.
+               bit1= fill to max fifo size
+*/
+int burn_fifo_fill_data(struct burn_source *source, char *buf, int bufsize,
                         int flag)
 {
 	int size, free_bytes, ret, wait_count= 0;
 	char *status_text;
 	struct burn_source_fifo *fs = source->data;
 
+	if (buf == NULL)
+		flag |= 1;
+
 	/* Eventually start fifo thread by reading 0 bytes */
 	ret = fifo_read(source, (unsigned char *) NULL, 0);
 	if (ret<0)
-		return 0;
+		{ret = 0; goto ex;}
 
 	/* wait for at least bufsize bytes being ready */
 	while (1) {
 		ret= burn_fifo_inquire_status(source,
 					 &size, &free_bytes, &status_text);
-		if (size < bufsize) {
-			libdax_msgs_submit(libdax_messenger, -1, 0x0002015c,
-			LIBDAX_MSGS_SEV_FAILURE, LIBDAX_MSGS_PRIO_HIGH,
-		 	"Fifo size is smaller than desired peek buffer", 0, 0);
-			return -1;
+		if (flag & 2) {
+			bufsize = size - (size % fs->inp_read_size) -
+					fs->inp_read_size;
+			if (bufsize <= 0)
+				{ret = 0; goto ex;}
+		}
+		if (size - fs->inp_read_size < bufsize) {
+			if (flag & 1) {
+				bufsize = size - (size % fs->inp_read_size) -
+						fs->inp_read_size;
+				if (bufsize <= 0)
+					{ret = 0; goto ex;}
+			} else {
+				libdax_msgs_submit(libdax_messenger, -1,
+					0x0002015c, LIBDAX_MSGS_SEV_FAILURE,
+					 LIBDAX_MSGS_PRIO_HIGH,
+			 	"Fifo size too small for desired peek buffer",
+					 0, 0);
+				{ret = -1; goto ex;}
+			}
 		}
 		if (fs->out_counter > 0 || (ret & 4) || fs->buf == NULL) {
 			libdax_msgs_submit(libdax_messenger, -1, 0x0002015e,
 			LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
 	 	"Fifo is already under consumption when peeking is desired",
 			0, 0);
-			return -1;
+			{ret = -1; goto ex;}
 		}
 		if(size - free_bytes >= bufsize) {
 
@@ -586,17 +671,33 @@ int burn_fifo_peek_data(struct burn_source *source, char *buf, int bufsize,
 		"libburn_DEBUG: after waiting cycle %d : fifo %s , %d bytes\n",
 			 wait_count, status_text, size - free_bytes);
 			*/
-
-			memcpy(buf, fs->buf, bufsize);
-			return 1;
+			if(!(flag & 1))
+				memcpy(buf, fs->buf, bufsize);
+			{ret = 1; goto ex;}
 		}
-		if (ret&2) { /* input has ended, not enough data arrived */
+
+		if (ret & 2) {
+			/* input has ended, not enough data arrived */
+			if (flag & 1)
+				{ret = 0; goto ex;}
 			libdax_msgs_submit(libdax_messenger, -1, 0x0002015d,
 			LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
 		 	"Fifo input ended short of desired peek buffer size",
 			0, 0);
-			return 0;
+			{ret = 0; goto ex;}
 		}
+
+		if (free_bytes < fs->inp_read_size) {
+			/* Usable fifo size filled, not enough data arrived */
+			if (flag & 1)
+				{ret = 0; goto ex;}
+			libdax_msgs_submit(libdax_messenger, -1, 0x00020174,
+			LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
+		 	"Fifo alignment does not allow desired read size",
+			0, 0);
+			{ret = 0; goto ex;}
+		}
+
 		usleep(100000);
 		wait_count++;
 
@@ -608,5 +709,25 @@ int burn_fifo_peek_data(struct burn_source *source, char *buf, int bufsize,
 		*/
 
 	}
-	return(0);
+	ret = 0;
+ex:;
+	fs->total_min_fill = fs->interval_min_fill = fs->buf_writepos;
+	return(ret);
 }
+
+
+/* ts A80713 : API */
+int burn_fifo_peek_data(struct burn_source *source, char *buf, int bufsize,
+                        int flag)
+{
+	return burn_fifo_fill_data(source, buf, bufsize, 0);
+}
+
+
+/* ts A91125 : API */
+int burn_fifo_fill(struct burn_source *source, int bufsize, int flag)
+{
+	return burn_fifo_fill_data(source, NULL, bufsize,
+					1 | ((flag & 1) << 1));
+}
+

libburn/file.h

@@ -35,6 +35,7 @@ struct burn_source_fifo {
 
 	/* the burn_source for which this fifo is acting as proxy */
 	struct burn_source *inp;
+	int inp_read_size;
 
 	/* <<< up to now it was only a pipe. This is on its way out. */
 	int outlet[2];
@@ -51,6 +52,14 @@ struct burn_source_fifo {
 
 	off_t in_counter;
 	off_t out_counter;
+
+	int total_min_fill;
+	int interval_min_fill;
+	int put_counter;
+	int get_counter;
+	int empty_counter;
+	int full_counter;
+
 };
 
 

libburn/init.c

@@ -75,6 +75,13 @@ burn_abort_handler_t burn_global_signal_handler = NULL;
 /* ts A70223 : wether implemented untested profiles are supported */
 int burn_support_untested_profiles = 0;
 
+/* ts A91111 :
+   whether to log SCSI commands (to be implemented in sg-*.c)
+   bit0= log in /tmp/libburn_sg_command_log
+   bit1= log to stderr
+   bit2= flush every line
+*/
+int burn_sg_log_scsi = 0;
 
 /* ts A60925 : ticket 74 */
 /** Create the messenger object for libburn. */
@@ -414,3 +421,9 @@ int burn_set_messenger(void *messenger)
 	return 1;
 }
 
+
+/* ts A91111 API */
+void burn_set_scsi_logging(int flag)
+{
+	burn_sg_log_scsi = flag & 7;
+}

libburn/lec.c

@@ -1,451 +0,0 @@
-/* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */
-
-/* borrowed HEAVILY from cdrdao */
-
-#include <string.h>
-#include "lec.h"
-
-#define LEC_HEADER_OFFSET 12
-#define LEC_MODE1_P_PARITY_OFFSET 2076
-#define LEC_MODE1_Q_PARITY_OFFSET 2248
-
-static unsigned char gf8_ilog[255] = {
-	1, 2, 4, 8, 16, 32, 64, 128, 29, 58, 116, 232, 205, 135, 19, 38, 76,
-	152, 45, 90, 180, 117, 234, 201, 143, 3, 6, 12, 24, 48, 96,
-	192, 157, 39, 78, 156, 37, 74, 148, 53, 106, 212, 181, 119,
-	238, 193, 159, 35, 70, 140, 5, 10, 20, 40, 80, 160, 93, 186,
-	105, 210, 185, 111, 222, 161, 95, 190, 97, 194, 153, 47, 94,
-	188, 101, 202, 137, 15, 30, 60, 120, 240, 253, 231, 211, 187,
-	107, 214, 177, 127, 254, 225, 223, 163, 91, 182, 113, 226, 217,
-	175, 67, 134, 17, 34, 68, 136, 13, 26, 52, 104, 208, 189, 103,
-	206, 129, 31, 62, 124, 248, 237, 199, 147, 59, 118, 236, 197,
-	151, 51, 102, 204, 133, 23, 46, 92, 184, 109, 218, 169, 79,
-	158, 33, 66, 132, 21, 42, 84, 168, 77, 154, 41, 82, 164, 85,
-	170, 73, 146, 57, 114, 228, 213, 183, 115, 230, 209, 191, 99,
-	198, 145, 63, 126, 252, 229, 215, 179, 123, 246, 241, 255, 227,
-	219, 171, 75, 150, 49, 98, 196, 149, 55, 110, 220, 165, 87,
-	174, 65, 130, 25, 50, 100, 200, 141, 7, 14, 28, 56, 112, 224,
-	221, 167, 83, 166, 81, 162, 89, 178, 121, 242, 249, 239, 195,
-	155, 43, 86, 172, 69, 138, 9, 18, 36, 72, 144, 61, 122, 244,
-	245, 247, 243, 251, 235, 203, 139, 11, 22, 44, 88, 176, 125,
-	250, 233, 207, 131, 27, 54, 108, 216, 173, 71, 142,
-};
-static unsigned char gf8_log[256] = {
-	0, 0, 1, 25, 2, 50, 26, 198, 3, 223, 51, 238, 27, 104, 199, 75, 4, 100,
-	224, 14, 52, 141, 239, 129, 28, 193, 105, 248, 200, 8, 76, 113,
-	5, 138, 101, 47, 225, 36, 15, 33, 53, 147, 142, 218, 240, 18,
-	130, 69, 29, 181, 194, 125, 106, 39, 249, 185, 201, 154, 9,
-	120, 77, 228, 114, 166, 6, 191, 139, 98, 102, 221, 48, 253,
-	226, 152, 37, 179, 16, 145, 34, 136, 54, 208, 148, 206, 143,
-	150, 219, 189, 241, 210, 19, 92, 131, 56, 70, 64, 30, 66, 182,
-	163, 195, 72, 126, 110, 107, 58, 40, 84, 250, 133, 186, 61,
-	202, 94, 155, 159, 10, 21, 121, 43, 78, 212, 229, 172, 115,
-	243, 167, 87, 7, 112, 192, 247, 140, 128, 99, 13, 103, 74, 222,
-	237, 49, 197, 254, 24, 227, 165, 153, 119, 38, 184, 180, 124,
-	17, 68, 146, 217, 35, 32, 137, 46, 55, 63, 209, 91, 149, 188,
-	207, 205, 144, 135, 151, 178, 220, 252, 190, 97, 242, 86, 211,
-	171, 20, 42, 93, 158, 132, 60, 57, 83, 71, 109, 65, 162, 31,
-	45, 67, 216, 183, 123, 164, 118, 196, 23, 73, 236, 127, 12,
-	111, 246, 108, 161, 59, 82, 41, 157, 85, 170, 251, 96, 134,
-	177, 187, 204, 62, 90, 203, 89, 95, 176, 156, 169, 160, 81, 11,
-	245, 22, 235, 122, 117, 44, 215, 79, 174, 213, 233, 230, 231,
-	173, 232, 116, 214, 244, 234, 168, 80, 88, 175,
-};
-static unsigned char gf8_q_coeffs[2][45] = {
-	{97, 251, 133, 60, 82, 160, 155, 201, 8, 112, 246, 11, 21, 42, 157,
-	 169, 80, 174, 232, 230, 172, 211, 241, 18, 68, 216, 44, 121, 9, 200,
-	 75, 103, 221, 252, 96, 176, 88, 167, 114, 76, 199, 26, 1, 0, 0},
-	{190, 96, 250, 132, 59, 81, 159, 154, 200, 7, 111, 245, 10, 20, 41,
-	 156, 168, 79, 173, 231, 229, 171, 210, 240, 17, 67, 215, 43, 120, 8,
-	 199, 74, 102, 220, 251, 95, 175, 87, 166, 113, 75, 198, 25, 0, 0}
-};
-static unsigned char gf8_p_coeffs[2][26] = {
-	{230, 172, 211, 241, 18, 68, 216, 44, 121, 9, 200, 75, 103, 221, 252,
-	 96, 176, 88, 167, 114, 76, 199, 26, 1, 0, 0},
-	{231, 229, 171, 210, 240, 17, 67, 215, 43, 120, 8, 199, 74, 102, 220,
-	 251, 95, 175, 87, 166, 113, 75, 198, 25, 0, 0}
-};
-
-static unsigned char yellowbook_scrambler[2340] = {
-	1, 128, 0, 96, 0, 40, 0, 30, 128, 8, 96, 6, 168, 2, 254, 129, 128, 96,
-	96, 40, 40, 30, 158,
-	136, 104, 102, 174, 170, 252, 127, 1, 224, 0, 72, 0, 54, 128, 22, 224,
-	14, 200, 4, 86, 131, 126, 225,
-	224, 72, 72, 54, 182, 150, 246, 238, 198, 204, 82, 213, 253, 159, 1,
-	168, 0, 126, 128, 32, 96, 24, 40,
-	10, 158, 135, 40, 98, 158, 169, 168, 126, 254, 160, 64, 120, 48, 34,
-	148, 25, 175, 74, 252, 55, 1, 214,
-	128, 94, 224, 56, 72, 18, 182, 141, 182, 229, 182, 203, 54, 215, 86,
-	222, 190, 216, 112, 90, 164, 59, 59,
-	83, 83, 125, 253, 225, 129, 136, 96, 102, 168, 42, 254, 159, 0, 104, 0,
-	46, 128, 28, 96, 9, 232, 6,
-	206, 130, 212, 97, 159, 104, 104, 46, 174, 156, 124, 105, 225, 238,
-	200, 76, 86, 181, 254, 247, 0, 70, 128,
-	50, 224, 21, 136, 15, 38, 132, 26, 227, 75, 9, 247, 70, 198, 178, 210,
-	245, 157, 135, 41, 162, 158, 249,
-	168, 66, 254, 177, 128, 116, 96, 39, 104, 26, 174, 139, 60, 103, 81,
-	234, 188, 79, 49, 244, 20, 71, 79,
-	114, 180, 37, 183, 91, 54, 187, 86, 243, 126, 197, 224, 83, 8, 61, 198,
-	145, 146, 236, 109, 141, 237, 165,
-	141, 187, 37, 179, 91, 53, 251, 87, 3, 126, 129, 224, 96, 72, 40, 54,
-	158, 150, 232, 110, 206, 172, 84,
-	125, 255, 97, 128, 40, 96, 30, 168, 8, 126, 134, 160, 98, 248, 41, 130,
-	158, 225, 168, 72, 126, 182, 160,
-	118, 248, 38, 194, 154, 209, 171, 28, 127, 73, 224, 54, 200, 22, 214,
-	142, 222, 228, 88, 75, 122, 183, 99,
-	54, 169, 214, 254, 222, 192, 88, 80, 58, 188, 19, 49, 205, 212, 85,
-	159, 127, 40, 32, 30, 152, 8, 106,
-	134, 175, 34, 252, 25, 129, 202, 224, 87, 8, 62, 134, 144, 98, 236, 41,
-	141, 222, 229, 152, 75, 42, 183,
-	95, 54, 184, 22, 242, 142, 197, 164, 83, 59, 125, 211, 97, 157, 232,
-	105, 142, 174, 228, 124, 75, 97, 247,
-	104, 70, 174, 178, 252, 117, 129, 231, 32, 74, 152, 55, 42, 150, 159,
-	46, 232, 28, 78, 137, 244, 102, 199,
-	106, 210, 175, 29, 188, 9, 177, 198, 244, 82, 199, 125, 146, 161, 173,
-	184, 125, 178, 161, 181, 184, 119, 50,
-	166, 149, 186, 239, 51, 12, 21, 197, 207, 19, 20, 13, 207, 69, 148, 51,
-	47, 85, 220, 63, 25, 208, 10,
-	220, 7, 25, 194, 138, 209, 167, 28, 122, 137, 227, 38, 201, 218, 214,
-	219, 30, 219, 72, 91, 118, 187, 102,
-	243, 106, 197, 239, 19, 12, 13, 197, 197, 147, 19, 45, 205, 221, 149,
-	153, 175, 42, 252, 31, 1, 200, 0,
-	86, 128, 62, 224, 16, 72, 12, 54, 133, 214, 227, 30, 201, 200, 86, 214,
-	190, 222, 240, 88, 68, 58, 179,
-	83, 53, 253, 215, 1, 158, 128, 104, 96, 46, 168, 28, 126, 137, 224,
-	102, 200, 42, 214, 159, 30, 232, 8,
-	78, 134, 180, 98, 247, 105, 134, 174, 226, 252, 73, 129, 246, 224, 70,
-	200, 50, 214, 149, 158, 239, 40, 76,
-	30, 181, 200, 119, 22, 166, 142, 250, 228, 67, 11, 113, 199, 100, 82,
-	171, 125, 191, 97, 176, 40, 116, 30,
-	167, 72, 122, 182, 163, 54, 249, 214, 194, 222, 209, 152, 92, 106, 185,
-	239, 50, 204, 21, 149, 207, 47, 20,
-	28, 15, 73, 196, 54, 211, 86, 221, 254, 217, 128, 90, 224, 59, 8, 19,
-	70, 141, 242, 229, 133, 139, 35,
-	39, 89, 218, 186, 219, 51, 27, 85, 203, 127, 23, 96, 14, 168, 4, 126,
-	131, 96, 97, 232, 40, 78, 158,
-	180, 104, 119, 110, 166, 172, 122, 253, 227, 1, 137, 192, 102, 208, 42,
-	220, 31, 25, 200, 10, 214, 135, 30,
-	226, 136, 73, 166, 182, 250, 246, 195, 6, 209, 194, 220, 81, 153, 252,
-	106, 193, 239, 16, 76, 12, 53, 197,
-	215, 19, 30, 141, 200, 101, 150, 171, 46, 255, 92, 64, 57, 240, 18,
-	196, 13, 147, 69, 173, 243, 61, 133,
-	209, 163, 28, 121, 201, 226, 214, 201, 158, 214, 232, 94, 206, 184, 84,
-	114, 191, 101, 176, 43, 52, 31, 87,
-	72, 62, 182, 144, 118, 236, 38, 205, 218, 213, 155, 31, 43, 72, 31,
-	118, 136, 38, 230, 154, 202, 235, 23,
-	15, 78, 132, 52, 99, 87, 105, 254, 174, 192, 124, 80, 33, 252, 24, 65,
-	202, 176, 87, 52, 62, 151, 80,
-	110, 188, 44, 113, 221, 228, 89, 139, 122, 231, 99, 10, 169, 199, 62,
-	210, 144, 93, 172, 57, 189, 210, 241,
-	157, 132, 105, 163, 110, 249, 236, 66, 205, 241, 149, 132, 111, 35,
-	108, 25, 237, 202, 205, 151, 21, 174, 143,
-	60, 100, 17, 235, 76, 79, 117, 244, 39, 7, 90, 130, 187, 33, 179, 88,
-	117, 250, 167, 3, 58, 129, 211,
-	32, 93, 216, 57, 154, 146, 235, 45, 143, 93, 164, 57, 187, 82, 243,
-	125, 133, 225, 163, 8, 121, 198, 162,
-	210, 249, 157, 130, 233, 161, 142, 248, 100, 66, 171, 113, 191, 100,
-	112, 43, 100, 31, 107, 72, 47, 118, 156,
-	38, 233, 218, 206, 219, 20, 91, 79, 123, 116, 35, 103, 89, 234, 186,
-	207, 51, 20, 21, 207, 79, 20, 52,
-	15, 87, 68, 62, 179, 80, 117, 252, 39, 1, 218, 128, 91, 32, 59, 88, 19,
-	122, 141, 227, 37, 137, 219,
-	38, 219, 90, 219, 123, 27, 99, 75, 105, 247, 110, 198, 172, 82, 253,
-	253, 129, 129, 160, 96, 120, 40, 34,
-	158, 153, 168, 106, 254, 175, 0, 124, 0, 33, 192, 24, 80, 10, 188, 7,
-	49, 194, 148, 81, 175, 124, 124,
-	33, 225, 216, 72, 90, 182, 187, 54, 243, 86, 197, 254, 211, 0, 93, 192,
-	57, 144, 18, 236, 13, 141, 197,
-	165, 147, 59, 45, 211, 93, 157, 249, 169, 130, 254, 225, 128, 72, 96,
-	54, 168, 22, 254, 142, 192, 100, 80,
-	43, 124, 31, 97, 200, 40, 86, 158, 190, 232, 112, 78, 164, 52, 123, 87,
-	99, 126, 169, 224, 126, 200, 32,
-	86, 152, 62, 234, 144, 79, 44, 52, 29, 215, 73, 158, 182, 232, 118,
-	206, 166, 212, 122, 223, 99, 24, 41,
-	202, 158, 215, 40, 94, 158, 184, 104, 114, 174, 165, 188, 123, 49, 227,
-	84, 73, 255, 118, 192, 38, 208, 26,
-	220, 11, 25, 199, 74, 210, 183, 29, 182, 137, 182, 230, 246, 202, 198,
-	215, 18, 222, 141, 152, 101, 170, 171,
-	63, 63, 80, 16, 60, 12, 17, 197, 204, 83, 21, 253, 207, 1, 148, 0, 111,
-	64, 44, 48, 29, 212, 9,
-	159, 70, 232, 50, 206, 149, 148, 111, 47, 108, 28, 45, 201, 221, 150,
-	217, 174, 218, 252, 91, 1, 251, 64,
-	67, 112, 49, 228, 20, 75, 79, 119, 116, 38, 167, 90, 250, 187, 3, 51,
-	65, 213, 240, 95, 4, 56, 3,
-	82, 129, 253, 160, 65, 184, 48, 114, 148, 37, 175, 91, 60, 59, 81, 211,
-	124, 93, 225, 249, 136, 66, 230,
-	177, 138, 244, 103, 7, 106, 130, 175, 33, 188, 24, 113, 202, 164, 87,
-	59, 126, 147, 96, 109, 232, 45, 142,
-	157, 164, 105, 187, 110, 243, 108, 69, 237, 243, 13, 133, 197, 163, 19,
-	57, 205, 210, 213, 157, 159, 41, 168,
-	30, 254, 136, 64, 102, 176, 42, 244, 31, 7, 72, 2, 182, 129, 182, 224,
-	118, 200, 38, 214, 154, 222, 235,
-	24, 79, 74, 180, 55, 55, 86, 150, 190, 238, 240, 76, 68, 53, 243, 87,
-	5, 254, 131, 0, 97, 192, 40,
-	80, 30, 188, 8, 113, 198, 164, 82, 251, 125, 131, 97, 161, 232, 120,
-	78, 162, 180, 121, 183, 98, 246, 169,
-	134, 254, 226, 192, 73, 144, 54, 236, 22, 205, 206, 213, 148, 95, 47,
-	120, 28, 34, 137, 217, 166, 218, 250,
-	219, 3, 27, 65, 203, 112, 87, 100, 62, 171, 80, 127, 124, 32, 33, 216,
-	24, 90, 138, 187, 39, 51, 90,
-	149, 251, 47, 3, 92, 1, 249, 192, 66, 208, 49, 156, 20, 105, 207, 110,
-	212, 44, 95, 93, 248, 57, 130,
-	146, 225, 173, 136, 125, 166, 161, 186, 248, 115, 2, 165, 193, 187, 16,
-	115, 76, 37, 245, 219, 7, 27, 66,
-	139, 113, 167, 100, 122, 171, 99, 63, 105, 208, 46, 220, 28, 89, 201,
-	250, 214, 195, 30, 209, 200, 92, 86,
-	185, 254, 242, 192, 69, 144, 51, 44, 21, 221, 207, 25, 148, 10, 239,
-	71, 12, 50, 133, 213, 163, 31, 57,
-	200, 18, 214, 141, 158, 229, 168, 75, 62, 183, 80, 118, 188, 38, 241,
-	218, 196, 91, 19, 123, 77, 227, 117,
-	137, 231, 38, 202, 154, 215, 43, 30, 159, 72, 104, 54, 174, 150, 252,
-	110, 193, 236, 80, 77, 252, 53, 129,
-	215, 32, 94, 152, 56, 106, 146, 175, 45, 188, 29, 177, 201, 180, 86,
-	247, 126, 198, 160, 82, 248, 61, 130,
-	145, 161, 172, 120, 125, 226, 161, 137, 184, 102, 242, 170, 197, 191,
-	19, 48, 13, 212, 5, 159, 67, 40, 49,
-	222, 148, 88, 111, 122, 172, 35, 61, 217, 209, 154, 220, 107, 25, 239,
-	74, 204, 55, 21, 214, 143, 30, 228,
-	8, 75, 70, 183, 114, 246, 165, 134, 251, 34, 195, 89, 145, 250, 236,
-	67, 13, 241, 197, 132, 83, 35, 125,
-	217, 225, 154, 200, 107, 22, 175, 78, 252, 52, 65, 215, 112, 94, 164,
-	56, 123, 82, 163, 125, 185, 225, 178,
-	200, 117, 150, 167, 46, 250, 156, 67, 41, 241, 222, 196, 88, 83, 122,
-	189, 227, 49, 137, 212, 102, 223, 106,
-	216, 47, 26, 156, 11, 41, 199, 94, 210, 184, 93, 178, 185, 181, 178,
-	247, 53, 134, 151, 34, 238, 153, 140,
-	106, 229, 239, 11, 12, 7, 69, 194, 179, 17, 181, 204, 119, 21, 230,
-	143, 10, 228, 7, 11, 66, 135, 113,
-	162, 164, 121, 187, 98, 243, 105, 133, 238, 227, 12, 73, 197, 246, 211,
-	6, 221, 194, 217, 145, 154, 236, 107,
-	13, 239, 69, 140, 51, 37, 213, 219, 31, 27, 72, 11, 118, 135, 102, 226,
-	170, 201, 191, 22, 240, 14, 196,
-	4, 83, 67, 125, 241, 225, 132, 72, 99, 118, 169, 230, 254, 202, 192,
-	87, 16, 62, 140, 16, 101, 204, 43,
-	21, 223, 79, 24, 52, 10, 151, 71, 46, 178, 156, 117, 169, 231, 62, 202,
-	144, 87, 44, 62, 157, 208, 105,
-	156, 46, 233, 220, 78, 217, 244, 90, 199, 123, 18, 163, 77, 185, 245,
-	178, 199, 53, 146, 151, 45, 174, 157,
-	188, 105, 177, 238, 244, 76, 71, 117, 242, 167, 5, 186, 131, 51, 33,
-	213, 216, 95, 26, 184, 11, 50, 135,
-	85, 162, 191, 57, 176, 18, 244, 13, 135, 69, 162, 179, 57, 181, 210,
-	247, 29, 134, 137, 162, 230, 249, 138,
-	194, 231, 17, 138, 140, 103, 37, 234, 155, 15, 43, 68, 31, 115, 72, 37,
-	246, 155, 6, 235, 66, 207, 113,
-	148, 36, 111, 91, 108, 59, 109, 211, 109, 157, 237, 169, 141, 190, 229,
-	176, 75, 52, 55, 87, 86, 190, 190,
-	240, 112, 68, 36, 51, 91, 85, 251, 127, 3, 96, 1, 232, 0, 78, 128, 52,
-	96, 23, 104, 14, 174, 132,
-	124, 99, 97, 233, 232, 78, 206, 180, 84, 119, 127, 102, 160, 42, 248,
-	31, 2, 136, 1, 166, 128, 122, 224,
-	35, 8, 25, 198, 138, 210, 231, 29, 138, 137, 167, 38, 250, 154, 195,
-	43, 17, 223, 76, 88, 53, 250, 151,
-	3, 46, 129, 220, 96, 89, 232, 58, 206, 147, 20, 109, 207, 109, 148, 45,
-	175, 93, 188, 57, 177, 210, 244,
-	93, 135, 121, 162, 162, 249, 185, 130, 242, 225, 133, 136, 99, 38, 169,
-	218, 254, 219, 0, 91, 64, 59, 112,
-	19, 100, 13, 235, 69, 143, 115, 36, 37, 219, 91, 27, 123, 75, 99, 119,
-	105, 230, 174, 202, 252, 87, 1,
-	254, 128, 64, 96, 48, 40, 20, 30, 143, 72, 100, 54, 171, 86, 255, 126,
-	192, 32, 80, 24, 60, 10, 145,
-	199, 44, 82, 157, 253, 169, 129, 190, 224, 112, 72, 36, 54, 155, 86,
-	235, 126, 207, 96, 84, 40, 63, 94,
-	144, 56, 108, 18, 173, 205, 189, 149, 177, 175, 52, 124, 23, 97, 206,
-	168, 84, 126, 191, 96, 112, 40, 36,
-	30, 155, 72, 107, 118, 175, 102, 252, 42, 193, 223, 16, 88, 12, 58,
-	133, 211, 35, 29, 217, 201, 154, 214,
-	235, 30, 207, 72, 84, 54, 191, 86, 240, 62, 196, 16, 83, 76, 61, 245,
-	209, 135, 28, 98, 137, 233, 166,
-	206, 250, 212, 67, 31, 113, 200, 36, 86, 155, 126, 235, 96, 79, 104,
-	52, 46, 151, 92, 110, 185, 236, 114,
-	205, 229, 149, 139, 47, 39, 92, 26, 185, 203, 50, 215, 85, 158, 191,
-	40, 112, 30, 164, 8, 123, 70, 163,
-	114, 249, 229, 130, 203, 33, 151, 88, 110, 186, 172, 115, 61, 229, 209,
-	139, 28, 103, 73, 234, 182, 207, 54,
-	212, 22, 223, 78, 216, 52, 90, 151, 123, 46, 163, 92, 121, 249, 226,
-	194, 201, 145, 150, 236, 110, 205, 236,
-	85, 141, 255, 37, 128, 27, 32, 11, 88, 7, 122, 130, 163, 33, 185, 216,
-	114, 218, 165, 155, 59, 43, 83,
-	95, 125, 248, 33, 130, 152, 97, 170, 168, 127, 62, 160, 16, 120, 12,
-	34, 133, 217, 163, 26, 249, 203, 2,
-	215, 65, 158, 176, 104, 116, 46, 167, 92, 122, 185, 227, 50, 201, 213,
-	150, 223, 46, 216, 28, 90, 137, 251,
-	38, 195, 90, 209, 251, 28, 67, 73, 241, 246, 196, 70, 211, 114, 221,
-	229, 153,
-};
-
-void scramble(unsigned char *inout)
-{
-	unsigned char *r = inout + 12;
-	unsigned char *s = yellowbook_scrambler;
-	unsigned int i;
-
-	for (i = 2340; i; i--) {
-		*r++ ^= *s++;
-	}
-}
-
-/* Calculate the P parities for the sector.
- * The 43 P vectors of length 24 are combined with the GF8_P_COEFFS.
- */
-void parity_p(unsigned char *sector)
-{
-	int i, j;
-	unsigned char p0_msb, p1_msb;
-	unsigned char p0_lsb, p1_lsb;
-	unsigned char *p_msb_start, *p_lsb_start;
-	unsigned char *p_msb, *p_lsb;
-	unsigned char *coeffs0, *coeffs1;
-	unsigned char *p0, *p1;
-	unsigned char d;
-	unsigned short c;
-
-	p_lsb_start = sector + LEC_HEADER_OFFSET;
-	p_msb_start = sector + LEC_HEADER_OFFSET + 1;
-
-	p1 = sector + LEC_MODE1_P_PARITY_OFFSET;
-	p0 = sector + LEC_MODE1_P_PARITY_OFFSET + 2 * 43;
-
-	for (i = 0; i <= 42; i++) {
-		p_lsb = p_lsb_start;
-		p_msb = p_msb_start;
-
-		coeffs0 = gf8_p_coeffs[0];
-		coeffs1 = gf8_p_coeffs[1];
-
-		p0_lsb = p1_lsb = p0_msb = p1_msb = 0;
-
-		for (j = 0; j <= 23; j++) {
-			d = *p_lsb;
-
-			if (d != 0) {
-				c = gf8_log[d] + *coeffs0;
-				if (c >= 255)
-					c -= 255;
-				p0_lsb ^= gf8_ilog[c];
-
-				c = gf8_log[d] + *coeffs1;
-				if (c >= 255)
-					c -= 255;
-				p1_lsb ^= gf8_ilog[c];
-			}
-
-			d = *p_msb;
-
-			if (d != 0) {
-				c = gf8_log[d] + *coeffs0;
-				if (c >= 255)
-					c -= 255;
-				p0_msb ^= gf8_ilog[c];
-
-				c = gf8_log[d] + *coeffs1;
-				if (c >= 255)
-					c -= 255;
-				p1_msb ^= gf8_ilog[c];
-			}
-
-			coeffs0++;
-			coeffs1++;
-
-			p_lsb += 2 * 43;
-			p_msb += 2 * 43;
-		}
-
-		*p0 = p0_lsb;
-		*(p0 + 1) = p0_msb;
-
-		*p1 = p1_lsb;
-		*(p1 + 1) = p1_msb;
-
-		p0 += 2;
-		p1 += 2;
-
-		p_lsb_start += 2;
-		p_msb_start += 2;
-	}
-}
-
-/* Calculate the Q parities for the sector.
- * The 26 Q vectors of length 43 are combined with the GF8_Q_COEFFS.
- */
-void parity_q(unsigned char *sector)
-{
-	int i, j;
-	unsigned char q0_msb, q1_msb;
-	unsigned char q0_lsb, q1_lsb;
-	unsigned char *q_msb_start, *q_lsb_start;
-	unsigned char *q_msb, *q_lsb;
-	unsigned char *coeffs0, *coeffs1;
-	unsigned char *q0, *q1, *q_start;
-	unsigned char d;
-	unsigned short c;
-
-	q_lsb_start = sector + LEC_HEADER_OFFSET;
-	q_msb_start = sector + LEC_HEADER_OFFSET + 1;
-
-	q_start = sector + LEC_MODE1_Q_PARITY_OFFSET;
-	q1 = sector + LEC_MODE1_Q_PARITY_OFFSET;
-	q0 = sector + LEC_MODE1_Q_PARITY_OFFSET + 2 * 26;
-
-	for (i = 0; i <= 25; i++) {
-		q_lsb = q_lsb_start;
-		q_msb = q_msb_start;
-
-		coeffs0 = gf8_q_coeffs[0];
-		coeffs1 = gf8_q_coeffs[1];
-
-		q0_lsb = q1_lsb = q0_msb = q1_msb = 0;
-
-		for (j = 0; j <= 42; j++) {
-			d = *q_lsb;
-
-			if (d != 0) {
-				c = gf8_log[d] + *coeffs0;
-				if (c >= 255)
-					c -= 255;
-				q0_lsb ^= gf8_ilog[c];
-
-				c = gf8_log[d] + *coeffs1;
-				if (c >= 255)
-					c -= 255;
-				q1_lsb ^= gf8_ilog[c];
-			}
-
-			d = *q_msb;
-
-			if (d != 0) {
-				c = gf8_log[d] + *coeffs0;
-				if (c >= 255)
-					c -= 255;
-				q0_msb ^= gf8_ilog[c];
-
-				c = gf8_log[d] + *coeffs1;
-				if (c >= 255)
-					c -= 255;
-				q1_msb ^= gf8_ilog[c];
-			}
-
-			coeffs0++;
-			coeffs1++;
-
-			q_lsb += 2 * 44;
-			q_msb += 2 * 44;
-
-			if (q_lsb >= q_start) {
-				q_msb -= 2 * 1118;
-				q_lsb -= 2 * 1118;
-			}
-		}
-
-		*q0 = q0_lsb;
-		*(q0 + 1) = q0_msb;
-
-		*q1 = q1_lsb;
-		*(q1 + 1) = q1_msb;
-
-		q0 += 2;
-		q1 += 2;
-
-		q_lsb_start += 2 * 43;
-		q_msb_start += 2 * 43;
-	}
-}

libburn/lec.h

@@ -1,12 +0,0 @@
-/* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */
-
-#ifndef __LEC
-#define __LEC
-
-#define RS_L12_BITS 8
-
-void scramble(unsigned char *);
-void parity_p(unsigned char *in);
-void parity_q(unsigned char *in);
-
-#endif /* __LEC */

libburn/libburn.h

@@ -119,7 +119,8 @@ enum burn_write_types
 	      2s gaps between tracks, no fonky lead-ins
 
 	    With sequential DVD-R[W]:    Incremental Streaming
-	    With DVD-RAM/+RW:            Random Writeable (used sequentially)
+	    With DVD+R and BD-R:         Track of open size
+	    With DVD-RAM, DVD+RW, BD-RE: Random Writeable (used sequentially)
 	    With overwriteable DVD-RW:   Rigid Restricted Overwrite 
 	*/
 	BURN_WRITE_TAO,
@@ -130,19 +131,32 @@ enum burn_write_types
 
 	    With sequential DVD-R[W]:    Disc-at-once, DAO
 	      Single session, single track, fixed size mandatory, (-dvd-compat)
+	    With other DVD or BD media:  same as BURN_WRITE_TAO but may demand
+	                                 that track size is known in advance.
 	*/
 	BURN_WRITE_SAO,
 
 	/** With CD: Raw disc at once recording.
 	      all subcodes must be provided by lib or user
 	      only raw block types are supported
+	    With DVD and BD media: not supported.
+
+	    ts A90901: This had been disabled because its implementation
+	               relied on code from cdrdao which is not understood
+	               currently.
+	               A burn run will abort with "FATAL" error message
+	               if this mode is attempted.
+	               @since 0.7.2
+	    ts A91016: Re-implemented according to ECMA-130 Annex A and B.
+	               Now understood, explained and not stemming from cdrdao.
+	               @since 0.7.4
 	*/
 	BURN_WRITE_RAW,
 
 	/** In replies this indicates that not any writing will work.
 	    As parameter for inquiries it indicates that no particular write
             mode shall is specified.
-	    Do not use for setting a write mode for burning. It won't work.
+	    Do not use for setting a write mode for burning. It will not work.
 	*/
 	BURN_WRITE_NONE
 };
@@ -338,7 +352,7 @@ struct burn_toc_entry
 	*/
 	unsigned char extensions_valid;  
 
-	/* ts A70201 : DVD extension.
+	/* ts A70201 : DVD extension. extensions_valid:bit0
 	   If invalid the members are guaranteed to be 0. */
         /* @since 0.3.2 */
 	/* Tracks and session numbers are 16 bit. Here are the high bytes. */
@@ -349,6 +363,13 @@ struct burn_toc_entry
 	/* min, sec, and frame may be too small if DVD extension is valid */
 	int track_blocks;
 	
+	/* ts A90909 : LRA extension. extensions_valid:bit1 */
+	/* @since 0.7.2 */
+	/* MMC-5 6.27.3.18 : The Last Recorded Address is valid for DVD-R,
+	                  DVD-R DL when LJRS = 00b, DVD-RW, HD DVD-R, and BD-R.
+	   This would mean profiles: 0x11, 0x15, 0x13, 0x14, 0x51, 0x41, 0x42 
+	*/
+	int last_recorded_address;
 };
 
 
@@ -741,6 +762,19 @@ int burn_abort_pacifier(void *handle, int patience, int elapsed);
 */
 void burn_set_verbosity(int level);
 
+/* ts A91111 */
+/** Enable resp. disable logging of SCSI commands (currently Linux only).
+    This call can be made at any time - even before burn_initialize().
+    It is in effect for all active drives and currently not very thread
+    safe for multiple drives.
+    @param flag  Bitfield for control purposes. The default is 0.
+                 bit0= log to file /tmp/libburn_sg_command_log
+                 bit1= log to stderr
+                 bit2= flush output after each line
+    @since 0.7.4
+*/
+void burn_set_scsi_logging(int flag);
+
 /* ts A60813 */
 /** Set parameters for behavior on opening device files. To be called early
     after burn_initialize() and before any bus scan. But not mandatory at all.
@@ -1029,6 +1063,23 @@ int burn_drive_obtain_scsi_adr(char *path, int *bus_no, int *host_no,
 int burn_drive_grab(struct burn_drive *drive, int load);
 
 
+/* ts A90824 */
+/** Calm down or alert a drive. Some drives stay alert after reading for
+    quite some time. This saves time with the startup for the next read
+    operation but also causes noise and consumes extra energy. It makes
+    sense to calm down the drive if no read operation is expected for the
+    next few seconds. The drive will get alert automatically if operations
+    are required.
+    @param drive  The drive to influence.
+    @param flag   Bitfield for control purposes
+                  bit0= become alert (else start snoozing)
+                        This is not mandatory to allow further drive operations
+    @return       1= success , 0= drive role not suitable for calming
+    @since 0.7.0
+*/
+int burn_drive_snooze(struct burn_drive *d, int flag);
+
+
 /** Release a drive. This should not be done until the drive is no longer
     busy (see burn_drive_get_status).
     Linux: The drive device file is not reserved afterwards. (O_EXCL, F_SETLK).
@@ -1108,6 +1159,61 @@ int burn_disc_read_atip(struct burn_drive *drive);
 int burn_drive_get_start_end_lba(struct burn_drive *drive,
                                  int *start_lba, int *end_lba, int flag);
 
+
+/* ts A90902 */
+/** Guess the manufacturer name of CD media from the ATIP addresses of lead-in
+    and lead-out. (Currently only lead-in is interpreted. Lead-out may in
+    future be used to identify the media type in more detail.)
+    The parameters of this call should be obtained by burn_disc_read_atip(d),
+    burn_drive_get_start_end_lba(d, &start_lba, &end_lba, 0),
+    burn_lba_to_msf(start_lba, &m_li, &s_li, &f_li) and
+    burn_lba_to_msf(end_lba, &m_lo, &s_lo, &f_lo).
+    @param m_li  "minute" part of ATIP lead-in resp. start_lba
+    @param s_li  "second" of lead-in resp. start_lba
+    @param f_li  "frame" of lead-in
+    @param m_lo  "minute" part of ATIP lead-out
+    @param s_lo  "second" of lead-out
+    @param f_lo  "frame" of lead-out
+    @param flag  Bitfield for control purposes,
+                 bit0= append a text "(aka ...)" to reply if other brands or
+                       vendor names are known.
+    @return      Printable text or NULL on memory shortage.
+                 Dispose by free() when no longer needed.
+    @since 0.7.2
+*/
+char *burn_guess_cd_manufacturer(int m_li, int s_li, int f_li,
+                                 int m_lo, int s_lo, int f_lo, int flag);
+
+/* ts A90909 */
+/** Retrieve some media information which is mainly specific to CD. For other
+    media only the bits in reply parameter valid are supposed to be meaningful.
+    @param drive     The drive to query.
+    @param disc_type A string saying either "CD-DA or CD-ROM", or "CD-I",
+                     or ""CD-ROM XA", or "undefined".
+    @param disc_id   A 32 bit number read from the media. (Meaning unclear yet)
+    @param bar_code  8 hex digits from a barcode on media read by the drive
+                     (if the drive has a bar code reader built in).
+    @param app_code  The Host Application Code which must be set in the Write
+                     Parameters Page if the media is not unrestricted (URU==0).
+    @param valid     Replies bits which indicate the validity of other reply
+                     parameters or the state of certain CD info bits:
+                     bit0= disc_type is valid
+                     bit1= disc_id is valid
+                     bit2= bar_code is valid
+                     bit3= disc_app_code is valid
+                     bit4= Disc is unrestricted (URU bit, 51h READ DISC INFO)
+                           This seems to be broken with my drives. The bit is
+                           0 and the validity bit for disc_app_code is 0 too.
+                     bit5= Disc is nominally erasable (Erasable bit)
+                           This will be set with overwriteable media which
+                           libburn normally considers to be unerasable blank.
+    @since 0.7.2
+*/
+int burn_disc_get_cd_info(struct burn_drive *d, char disc_type[80],
+                        unsigned int *disc_id, char bar_code[9], int *app_code,
+			int *valid);
+
+
 /* ts A61110 */
 /** Read start lba and Next Writeable Address of a track from media.
     Usually a track lba is obtained from the result of burn_track_get_entry().
@@ -1183,6 +1289,59 @@ off_t burn_disc_available_space(struct burn_drive *d,
 */
 int burn_disc_get_profile(struct burn_drive *d, int *pno, char name[80]);
 
+
+/* ts A90903 : API */
+/** Obtain product id and standards defined media codes.
+    The product id is a printable string which is supposed to be the same
+    for identical media but should vary with non-identical media. Some media
+    do not allow to obtain such an id at all. 
+    The pair (profile_number, product_id) should be the best id to identify
+    media with identical product specifications.
+    The reply parameters media_code1 and media_code2 can be used with
+    burn_guess_manufacturer()
+    The reply parameters have to be disposed by free() when no longer needed.
+    @param d           The drive where the media is inserted.
+    @param product_id  Reply: Printable text depicting manufacturer and
+                       eventually media id.
+    @param media_code1 Reply: The eventual manufacturer identification as read
+                       from DVD/BD media or a text "XXmYYsZZf" from CD media
+                       ATIP lead-in.
+    @param media_code2 The eventual media id as read from DVD+/BD media or a
+                       text "XXmYYsZZf" from CD ATIP lead-out.
+    @param book_type   Book type text for DVD and BD.
+                       Caution: is NULL with CD, even if return value says ok.
+    @param flag        Bitfield for control purposes
+                       bit0= do not escape " _/" (not suitable for
+                             burn_guess_manufacturer())
+    @return            1= ok, product_id and media codes are valid,
+                       0= no product id_available, reply parameters are NULL
+                      <0= error
+    @since 0.7.2
+*/
+int burn_disc_get_media_id(struct burn_drive *d,
+	char **product_id, char **media_code1, char **media_code2,
+	char **book_type, int flag);
+
+
+/* ts A90904 */
+/** Guess the name of a manufacturer by profile number, manufacturer code
+    and media code. The profile number can be obtained by
+    burn_disc_get_profile(), the other two parameters can be obtained as
+    media_code1 and media_code2 by burn_get_media_product_id().
+    @param profile_no   Profile number (submit -1 if not known)
+    @param manuf_code   Manufacturer code from media (e.g. "RICOHJPN")
+    @param media_code   Media ID code from media (e.g. "W11")
+    @param flag  Bitfield for control purposes, submit 0
+    @return      Printable text or NULL on memory shortage.
+                 If the text begins with "Unknown " then no item of the
+                 manufacturer list matched the codes.
+                 Dispose by free() when no longer needed.
+    @since 0.7.2
+*/
+char *burn_guess_manufacturer(int profile_no,
+				 char *manuf_code, char *media_code, int flag);
+
+
 /** Tells whether a disc can be erased or not
     @param d The drive to inquire.
     @return Non-zero means erasable
@@ -1419,9 +1578,11 @@ void burn_drive_cancel(struct burn_drive *drive);
 
 
 /* ts A61223 */
-/** Inquire whether the most recent write run was successful. Reasons for
-    non-success may be: rejection of burn parameters, abort during fatal errors
-    during write, a call to burn_drive_cancel() by the application thread.
+/** Inquire whether the most recent asynchronous media job was successful.
+    This applies to burn_disc_erase(), burn_disc_format(), burn_disc_write().
+    Reasons for non-success may be: rejection of burn parameters, abort due to
+    fatal errors during write, blank or format, a call to burn_drive_cancel()
+    by the application thread.
     @param d The drive to inquire.
     @return 1=burn seems to have went well, 0=burn failed 
     @since 0.2.6
@@ -1546,6 +1707,22 @@ void burn_track_define_data(struct burn_track *t, int offset, int tail,
 int burn_track_set_byte_swap(struct burn_track *t, int swap_source_bytes);
 
 
+/* ts A90910 */
+/** Activates CD XA compatibility modes.
+    libburn currently writes data only in CD mode 1. Some programs insist in
+    sending data with additional management bytes. These bytes have to be
+    stripped in order to make the input suitable for BURN_MODE1.
+    @param t     The track to manipulate
+    @param value 0= no conversion
+                 1= strip 8 byte sector headers of CD-ROM XA mode 2 form 1
+                    see MMC-5 4.2.3.8.5.3 Block Format for Mode 2 form 1 Data
+                 all other values are reserved
+    @return 1=success , 0=unacceptable value
+    @since 0.7.2
+*/
+int burn_track_set_cdxa_conv(struct burn_track *t, int value);
+
+
 /** Set the ISRC details for a track
 	@param t The track to change
 	@param country the 2 char country code. Each character must be
@@ -1613,6 +1790,58 @@ void burn_source_free(struct burn_source *s);
 struct burn_source *burn_file_source_new(const char *path,
 					 const char *subpath);
 
+
+/* ts A91122 : An interface to open(O_DIRECT) or similar OS tricks. */
+
+/** Opens a file with eventual acceleration preparations which may depend
+    on the operating system and on compile time options of libburn.
+    You may use this call instead of open(2) for opening file descriptors
+    which shall be handed to burn_fd_source_new().
+    This should only be done for tracks with BURN_BLOCK_MODE1 (2048 bytes
+    per block).
+
+    If you use this call then you MUST allocate the buffers which you use
+    with read(2) by call burn_os_alloc_buffer(). Read sizes MUST be a multiple
+    of a safe buffer amount. Else you risk that track data get altered during
+    transmission.
+    burn_disk_write() will allocate a suitable read/write buffer for its own
+    operations. A fifo created by burn_fifo_source_new() will allocate
+    suitable memory for its buffer if called with flag bit0 and a multiple
+    of a safe buffer amount. 
+    @param path       The file address to open
+    @param open_flags The flags as of man 2 open. Normally just O_RDONLY.
+    @param flag       Bitfield for control purposes (unused yet, submit 0).
+    @return           A file descriptor as of open(2). Finally to be disposed
+                      by close(2).
+                      -1 indicates failure.
+    @since 0.7.4
+*/
+int burn_os_open_track_src(char *path, int open_flags, int flag);
+
+/** Allocate a memory area that is suitable for reading with a file descriptor
+    opened by burn_os_open_track_src().
+    @param amount     Number of bytes to allocate. This should be a multiple
+                      of the operating system's i/o block size. 32 KB is
+                      guaranteed by libburn to be safe.
+    @param flag       Bitfield for control purposes (unused yet, submit 0).
+    @return           The address of the allocated memory, or NULL on failure.
+                      A non-NULL return value has finally to be disposed via
+                      burn_os_free_buffer().
+    @since 0.7.4
+*/
+void *burn_os_alloc_buffer(size_t amount, int flag);
+
+/** Dispose a memory area which was obtained by burn_os_alloc_buffer(),
+    @param buffer     Memory address to be freed.
+    @param amount     The number of bytes which was allocated at that
+                      address.
+    @param flag       Bitfield for control purposes (unused yet, submit 0).
+    @return           1 success , <=0 failure
+    @since 0.7.4
+*/
+int burn_os_free_buffer(void *buffer, size_t amount, int flag);
+
+
 /** Creates a data source for an image file (a track) from an open
     readable filedescriptor, an eventually open readable subcodes file
     descriptor and eventually a fixed size in bytes.
@@ -1642,14 +1871,26 @@ struct burn_source *burn_fd_source_new(int datafd, int subfd, off_t size);
     @param inp        The burn_source for which the fifo shall act as proxy.
                       It can be disposed by burn_source_free() immediately
                       after this call.
-    @param chunksize  The size in bytes of a chunk. Use 2048 for sources
-                      suitable for BURN_BLOCK_MODE1 and 2352 for sources
-                      which deliver for BURN_BLOCK_AUDIO.
+    @param chunksize  The size in bytes of a chunk.
+                      Use 2048 for sources suitable for BURN_BLOCK_MODE1,
+                      2352 for sources which deliver for BURN_BLOCK_AUDIO,
+                      2056 for sources which shall get treated by 
+                      burn_track_set_cdxa_conv(track, 1).
                       Some variations of burn_source might work only with
                       a particular chunksize. E.g. libisofs demands 2048.
     @param chunks     The number of chunks to be allocated in ring buffer.
                       This value must be >= 2.
-    @param flag       Bitfield for control purposes (unused yet, submit 0).
+    @param flag       Bitfield for control purposes:
+                      bit0= The read method of inp is capable of delivering
+                            arbitrary amounts of data per call. Not only one
+                            sector.
+                            Suitable for inp from burn_file_source_new()
+                            and burn_fd_source_new() if not the fd has
+                            exotic limitations on read size.
+                            You MUST use this on inp which uses an fd opened
+                            with burn_os_open_track_src().
+                            Better do not use with other inp types.
+                            @since 0.7.4
     @return           A pointer to the newly created burn_source.
                       Later both burn_sources, inp and the returned fifo, have
                       to be disposed by calling burn_source_free() for each.
@@ -1682,12 +1923,43 @@ struct burn_source *burn_fifo_source_new(struct burn_source *inp,
 int burn_fifo_inquire_status(struct burn_source *fifo, int *size, 
                             int *free_bytes, char **status_text);
 
+/* ts A91125 */
+/** Inquire various counters which reflect the fifo operation.
+    @param fifo              The fifo object to inquire
+    @param total_min_fill    The minimum number of bytes in the fifo. Beginning
+                             from the moment when fifo consumption is enabled.
+    @param interval_min_fill The minimum byte number beginning from the moment
+                             when fifo consumption is enabled or from the
+                             most recent moment when burn_fifo_next_interval()
+                             was called.
+    @param put_counter       The number of data transactions into the fifo.
+    @param get_counter       The number of data transactions out of the fifo.
+    @param empty_counter     The number of times the fifo was empty.
+    @param full_counter      The number of times the fifo was full.
+    @since 0.7.4
+*/
+void burn_fifo_get_statistics(struct burn_source *source,
+                             int *total_min_fill, int *interval_min_fill,
+                             int *put_counter, int *get_counter,
+                             int *empty_counter, int *full_counter);
+
+/* ts A91125 */
+/** Inquire the fifo minimum fill counter for intervals and reset that counter.
+    @param fifo              The fifo object to inquire
+    @param interval_min_fill The minimum number of bytes in the fifo. Beginning
+                             from the moment when fifo consumption is enabled
+                             or from the most recent moment when
+                             burn_fifo_next_interval() was called.
+    @since 0.7.4
+*/
+void burn_fifo_next_interval(struct burn_source *source,
+                            int *interval_min_fill);
 
 /* ts A80713 */
 /** Obtain a preview of the first input data of a fifo which was created
     by burn_fifo_source_new(). The data will later be delivered normally to
     the consumer track of the fifo.
-    bufsize may not be larger than the fifo size (chunk_size * chunks).
+    bufsize may not be larger than the fifo size (chunk_size * chunks) - 32k.
     This call will succeed only if data consumption by the track has not
     started yet, i.e. best before the call to burn_disc_write().
     It will start the worker thread of the fifo with the expectable side
@@ -1695,9 +1967,9 @@ int burn_fifo_inquire_status(struct burn_source *fifo, int *size,
     data have arrived or until it becomes clear that this will not happen.
     The call may be repeated with increased bufsize. It will always yield
     the bytes beginning from the first one in the fifo.
-    @param fifo     The fifo object to inquire
+    @param fifo     The fifo object to inquire resp. start
     @param buf      Pointer to memory of at least bufsize bytes where to
-                    deliver the peeked data
+                    deliver the peeked data.
     @param bufsize  Number of bytes to peek from the start of the fifo data
     @param flag     Bitfield for control purposes (unused yet, submit 0).
     @return <0 on severe error, 0 if not enough data, 1 if bufsize bytes read
@@ -1706,6 +1978,22 @@ int burn_fifo_inquire_status(struct burn_source *fifo, int *size,
 int burn_fifo_peek_data(struct burn_source *source, char *buf, int bufsize,
                         int flag);
 
+/* ts A91125 */
+/** Start the fifo worker thread and wait either until the requested number
+    of bytes have arrived or until it becomes clear that this will not happen.
+    Filling will go on asynchronously after burn_fifo_fill() returned.
+    This call and burn_fifo_peek_data() do not disturb each other.
+    @param fifo     The fifo object to start
+    @param fill     Number of bytes desired. Expect to get return 1 if 
+                    at least fifo size - 32k were read.
+    @param flag     Bitfield for control purposes.
+                    bit0= fill fifo to maximum size
+    @return <0 on severe error, 0 if not enough data,
+             1 if desired amount or fifo full
+    @since 0.7.4
+*/
+int burn_fifo_fill(struct burn_source *source, int bufsize, int flag);
+
 
 /* ts A70328 */
 /** Sets a fixed track size after the data source object has already been
@@ -1942,6 +2230,32 @@ void burn_write_opts_set_force(struct burn_write_opts *opts, int use_force);
 void burn_write_opts_set_stream_recording(struct burn_write_opts *opts, 
                                          int value);
 
+/* ts A91115 */
+/** Overrides the write chunk size for DVD and BD media which is normally
+    determined according to media type and setting of stream recording.
+    A chunk size of 64 KB may improve throughput with bus systems which show
+    latency problems.
+    @param opts The write opts to change
+    @param obs  Number of bytes which shall be sent by a single write command.
+                0 means automatic size, 32768 and 65336 are the only other
+                accepted sizes for now.
+    @since 0.7.4
+*/
+void burn_write_opts_set_dvd_obs(struct burn_write_opts *opts, int obs);
+
+/* ts A91115 */
+/** Sets the rythm by which stdio pseudo drives force their output data to
+    be consumed by the receiving storage device. This forcing keeps the memory
+    from being clogged with lots of pending data for slow devices.
+    @param opts   The write opts to change
+    @param rythm  Number of 2KB output blocks after which fsync(2) is
+                  performed. -1 means no fsync(), 0 means default,
+                  elsewise the value must be >= 32.
+                  Default is currently 8192 = 16 MB.
+    @since 0.7.4
+*/
+void burn_write_opts_set_stdio_fsync(struct burn_write_opts *opts, int rythm);
+
 
 /** Sets whether to read in raw mode or not
     @param opts The read opts to change
@@ -1998,6 +2312,34 @@ void burn_read_opts_transfer_damaged_blocks(struct burn_read_opts *opts,
 void burn_read_opts_set_hardware_error_retries(struct burn_read_opts *opts,
 					       unsigned char hardware_error_retries);
 
+
+/* ts A90815 */
+/** Gets the list of profile codes supported by the drive.
+    Profiles depict the feature sets which constitute media types. For
+    known profile codes and names see burn_disc_get_profile().
+    @param d            is the drive to query
+    @param num_profiles returns the number of supported profiles
+    @param profiles     returns the profile codes
+    @param is_current   returns the status of the corresponding profile code:
+                        1= current, i.e. the matching media is loaded
+                        0= not current, i.e. the matching media is not loaded
+    @return  always 1 for now
+    @since 0.7.0
+*/
+int burn_drive_get_all_profiles(struct burn_drive *d, int *num_profiles,
+                                int profiles[64], char is_current[64]);
+
+
+/* ts A90815 */
+/** Obtains the profile name associated with a profile code.
+    @param profile_code the profile code to be translated
+    @param name         returns the profile name (e.g. "DVD+RW")  
+    @return             1= known profile code , 0= unknown profile code
+    @since 0.7.0
+*/
+int burn_obtain_profile_name(int profile_code, char name[80]);
+
+
 /** Gets the maximum write speed for a drive and eventually loaded media.
     The return value might change by the media type of already loaded media,
     again by call burn_drive_grab() and again by call burn_disc_read_atip(). 
@@ -2259,8 +2601,8 @@ void burn_version(int *major, int *minor, int *micro);
 
 */
 #define burn_header_version_major  0
-#define burn_header_version_minor  6
-#define burn_header_version_micro  7
+#define burn_header_version_minor  7
+#define burn_header_version_micro  4
 /** Note:
     Above version numbers are also recorded in configure.ac because libtool
     wants them as parameters at build time.
@@ -2551,11 +2893,44 @@ int burn_drive_get_drive_role(struct burn_drive *d);
 int burn_drive_equals_adr(struct burn_drive *d1, char *adr2, int drive_role2);
 
 
-
 #ifndef DOXYGEN
 
 BURN_END_DECLS
 
 #endif
 
+
+/* ts A91205 */
+/* The following experiments may be interesting in future:
+*/
+
+/* Perform OPC explicitely.
+   # define Libburn_pioneer_dvr_216d_with_opC 1
+*/
+
+/* Load mode page 5 and modify it rather than composing from scratch.
+   # define Libburn_pioneer_dvr_216d_load_mode5 1
+*/
+
+/* Inquire drive events and react by reading configuration or starting unit.
+   # define Libburn_pioneer_dvr_216d_get_evenT 1
+*/
+
+/* ts A91112 */
+/* Do not probe CD modes but declare only data and audio modes supported.
+   For other modes resp. real probing one has to call
+   burn_drive_probe_cd_write_modes().
+
+   # define Libburn_pioneer_dvr_216d_dummy_probe_wM 1
+*/
+#ifdef Libburn_pioneer_dvr_216d_dummy_probe_wM
+
+/* Probe available CD write modes and block types.
+   @param drive_info  drive object to be inquired
+*/
+int burn_drive_probe_cd_write_modes(struct burn_drive_info *drive_info)
+
+#endif /* Libburn_pioneer_dvr_216d_dummy_probe_wM */
+
+
 #endif /*LIBBURN_H*/

libburn/libdax_msgs.h

@@ -528,7 +528,7 @@ Range "scdbackup"          :  0x00020000 to 0x0002ffff
  0x00020159 (DEBUG,HIGH)   = TOC Format 0 returns inconsistent data
  0x0002015a (NOTE,HIGH)    = Could not examine busy device
  0x0002015b (HINT,HIGH)    = Busy '...' seems to be a hard disk, as '...1' exists
- 0x0002015c (FAILURE,HIGH) = Fifo size is smaller than desired peek buffer
+ 0x0002015c (FAILURE,HIGH) = Fifo size too small for desired peek buffer
  0x0002015d (FAILURE,HIGH) = Fifo input ended short of desired peek buffer size
  0x0002015e (FATAL,HIGH)   = Fifo is already under consumption when peeking
  0x0002015f (MISHAP,HIGH)  = Damaged CD table-of-content detected and truncated
@@ -549,6 +549,9 @@ Range "scdbackup"          :  0x00020000 to 0x0002ffff
  0x0002016f (DEBUG,HIGH)   = Unable to grab scanned drive
  0x00020170 (NOTE,HIGH)    = Closing open session before writing new one
  0x00020171 (NOTE,HIGH)    = Closing BD-R with accidently open session
+ 0x00020172 (SORRY,HIGH)   = Read start address larger than number of readable blocks
+ 0x00020173 (FAILURE,HIGH) = Drive tells NWA smaller than last written address
+ 0x00020174 (SORRY,HIGH)   = Fifo alignment does not allow desired read size
  
 
  libdax_audioxtr:

libburn/mmc.h

@@ -68,6 +68,9 @@ int mmc_compose_mode_page_5(struct burn_drive *d,
                             const struct burn_write_opts *o,
                             unsigned char *pd);
 
+/* ts A70201 */
+int mmc_four_char_to_int(unsigned char *data);
+
 /* ts A70812 : return 0 = ok , return BE_CANCELLED = error occured */
 int mmc_read_10(struct burn_drive *d, int start, int amount,
                 struct buffer *buf);
@@ -75,8 +78,27 @@ int mmc_read_10(struct burn_drive *d, int start, int amount,
 /* ts A81210 : Determine the upper limit of readable data size */
 int mmc_read_capacity(struct burn_drive *d);
 
+/* ts A61201 */
+char *mmc_obtain_profile_name(int profile_number);
+
 
 /* mmc5r03c.pdf 4.3.4.4.1 d) "The maximum number of RZones is 2 302." */
 #define BURN_MMC_FAKE_TOC_MAX_SIZE 2302
 
+
+/* ts A90903 */
+/* MMC backend of API call burn_get_media_product_id()
+*/
+int mmc_get_media_product_id(struct burn_drive *d,
+        char **product_id, char **media_code1, char **media_code2,
+	char **book_type, int flag);
+
+
+/* ts A60910 (estimated) */
+int mmc_function_spy(struct burn_drive *d, char * text);
+
+/* ts A91118 */
+int mmc_start_if_needed(struct burn_drive *d, int flag);
+
+
 #endif /*__MMC*/

libburn/options.c

@@ -39,6 +39,8 @@ struct burn_write_opts *burn_write_opts_new(struct burn_drive *drive)
 	opts->fill_up_media = 0;
 	opts->force_is_set = 0;
 	opts->do_stream_recording = 0;
+	opts->dvd_obs_override = 0;
+	opts->stdio_fsync_size = Libburn_stdio_fsync_limiT;
 	opts->has_mediacatalog = 0;
 	opts->format = BURN_CDROM;
 	opts->multi = 0;
@@ -389,6 +391,25 @@ void burn_write_opts_set_stream_recording(struct burn_write_opts *opts,
 }
 
 
+/* ts A91115: API */
+void burn_write_opts_set_dvd_obs(struct burn_write_opts *opts, int obs)
+{
+	if (obs != 0 && obs != 32 * 1024 && obs != 64 * 1024)
+		return;
+	opts->dvd_obs_override = obs;
+}
+
+
+/* ts A91115: API */
+void burn_write_opts_set_stdio_fsync(struct burn_write_opts *opts, int rythm)
+{
+	if (rythm == -1)
+		opts->stdio_fsync_size = 0;
+	else if (rythm == 0)
+		opts->stdio_fsync_size = Libburn_stdio_fsync_limiT;
+	else if (rythm >= 32)
+		opts->stdio_fsync_size = rythm;
+}
 
 
 /* ts A70901: API */

libburn/options.h

@@ -51,9 +51,19 @@ struct burn_write_opts
 
 	/* ts A80412 : whether to use WRITE12 with Streaming bit set
 	   rather than WRITE10. Speeds up DVD-RAM. Might help with BD-RE.
-	   This gets transferred to burn_drive.do_stream_recording */
+	   This gets transferred to burn_drive.do_stream_recording
+	*/
 	int do_stream_recording;
 
+	/* ts A91115 : override value for .obs on DVD media.
+	   Only values 0, 32K and 64K are allowed for now. */
+	int dvd_obs_override;
+
+	/* ts A91115 : size of the fsync() interval for stdio writing.
+	   Values 0 or >= 32 counted in 2 KB blocks. */
+	int stdio_fsync_size;
+
+
 	/** A disc can have a media catalog number */
 	int has_mediacatalog;
 	unsigned char mediacatalog[13];
@@ -64,6 +74,11 @@ struct burn_write_opts
 	unsigned char multi;
 };
 
+/* Default value for burn_write_opts.stdio_flush_size
+*/
+#define Libburn_stdio_fsync_limiT 8192
+
+
 /** Options for disc reading operations. This should be created with
     burn_read_opts_new() and freed with burn_read_opts_free(). */
 struct burn_read_opts

libburn/read.c

@@ -27,7 +27,6 @@
 #include "crc.h"
 #include "debug.h"
 #include "init.h"
-#include "lec.h"
 #include "toc.h"
 #include "util.h"
 #include "sg.h"
@@ -371,6 +370,20 @@ int burn_read_data(struct burn_drive *d, off_t byte_address,
 			msg, 0, 0);
 		return 0;
 	}
+	if (d->media_read_capacity != 0x7fffffff && byte_address >=
+		((off_t) d->media_read_capacity + (off_t) 1) * (off_t) 2048) {
+		if (!(flag & 2)) {
+			sprintf(msg,
+			  "Read start address %ds larger than number of readable blocks %d",
+			  (int) (byte_address / 2048 + !!(byte_address % 2048)),
+			  d->media_read_capacity);
+			libdax_msgs_submit(libdax_messenger, d->global_index,
+				0x00020172,
+				LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
+				msg, 0, 0);
+		}
+		return 0;
+	}
 
 	if (d->busy != BURN_DRIVE_IDLE) {
 		libdax_msgs_submit(libdax_messenger,

libburn/sbc.c

@@ -17,10 +17,31 @@
 int mmc_function_spy(struct burn_drive *d, char * text);
 
 
-/* spc command set */
+/* START STOP UNIT as of SBC-1 and SBC-2
+   0:  Opcode 0x1B
+   1:  bit0= Immed
+       bit1-7= reserved 
+   2:  reserved
+   3:  reserved
+   4:  bit0= Start (else Stop unit)
+       bit1= Load/Eject (according to Start resp. Stop)
+       bit2-3= reserved
+       bit4-7= Power Condition
+               0= Start Valid: process Start and Load/Eject bits
+               1= assume Active state
+               2= assume Idle state
+               3= assume Stanby state
+              (5= SBC-1 only: assume Sleep state)
+               7= transfer control of power conditions to logical unit
+              10= force idle condition timer to 0
+              11= force standby condition timer to 0
+              All others are reserved.
+   5:  Control (set to 0)
+*/
 static unsigned char SBC_LOAD[] = { 0x1b, 0, 0, 0, 3, 0 };
 static unsigned char SBC_UNLOAD[] = { 0x1b, 0, 0, 0, 2, 0 };
 static unsigned char SBC_START_UNIT[] = { 0x1b, 0, 0, 0, 1, 0 };
+static unsigned char SBC_STOP_UNIT[] = { 0x1b, 0, 0, 0, 0, 0 };
 
 void sbc_load(struct burn_drive *d)
 {
@@ -30,11 +51,6 @@ void sbc_load(struct burn_drive *d)
 		return;
 
 	scsi_init_command(&c, SBC_LOAD, sizeof(SBC_LOAD));
-/*
-	memcpy(c.opcode, SBC_LOAD, sizeof(SBC_LOAD));
-	c.oplen = sizeof(SBC_LOAD);
-	c.page = NULL;
-*/
 	c.retry = 1;
 
 	/* ts A70921 : Had to revoke Immed because of LG GSA-4082B */
@@ -58,14 +74,7 @@ void sbc_eject(struct burn_drive *d)
 		return;
 
 	scsi_init_command(&c, SBC_UNLOAD, sizeof(SBC_UNLOAD));
-/*
-	memcpy(c.opcode, SBC_UNLOAD, sizeof(SBC_UNLOAD));
-	c.oplen = sizeof(SBC_UNLOAD);
-	c.page = NULL;
-*/
-
 	c.opcode[1] |= 1; /* ts A70918 : Immed */
-
 	c.page = NULL;
 	c.dir = NO_TRANSFER;
 	d->issue_command(d, &c);
@@ -75,33 +84,74 @@ void sbc_eject(struct burn_drive *d)
 	spc_wait_unit_attention(d, 1800, "STOP UNIT (+ EJECT)", 0);
 }
 
-/* ts A61118 : is it necessary to tell the drive to get ready for use ? */
-int sbc_start_unit(struct burn_drive *d)
+
+/* ts A91112 : Now with flag */
+/* @param flag bit0= asynchronous waiting
+*/
+int sbc_start_unit_flag(struct burn_drive *d, int flag)
 {
 	struct command c;
+	int ret;
 
 	if (mmc_function_spy(d, "start_unit") <= 0)
 		return 0;
 
 	scsi_init_command(&c, SBC_START_UNIT, sizeof(SBC_START_UNIT));
-/*
-	memcpy(c.opcode, SBC_START_UNIT, sizeof(SBC_START_UNIT));
-	c.oplen = sizeof(SBC_START_UNIT);
-	c.page = NULL;
-*/
 	c.retry = 1;
-
-	c.opcode[1] |= 1; /* ts A70918 : Immed */
-
+	c.opcode[1] |= (flag & 1); /* ts A70918 : Immed */
 	c.dir = NO_TRANSFER;
 	d->issue_command(d, &c);
 	if (c.error)
 		return 0;
-	/* ts A70918 : now asynchronous */
-	return spc_wait_unit_attention(d, 1800, "START UNIT", 0);
+	if (!(flag & 1))
+		return 1;
+	/* ts A70918 : asynchronous */
+	ret = spc_wait_unit_attention(d, 1800, "START UNIT", 0);
+	return ret;
 }
 
 
+int sbc_start_unit(struct burn_drive *d)
+{
+	int ret;
+
+	d->is_stopped = 0; /* no endless starting attempts */
+
+	/* Asynchronous, not to block controller by waiting */
+	ret = sbc_start_unit_flag(d, 1);
+	if (ret <= 0)
+		return ret;
+	/* Synchronous to catch Pioneer DVR-216D which is ready too early.
+	   A pending START UNIT can prevent ejecting of the tray.
+	*/
+	ret = sbc_start_unit_flag(d, 0);
+	return ret;
+}
+
+
+/* ts A90824 : Trying to reduce drive noise */
+int sbc_stop_unit(struct burn_drive *d)
+{
+	struct command c;
+	int ret;
+
+	if (mmc_function_spy(d, "stop_unit") <= 0)
+		return 0;
+
+	scsi_init_command(&c, SBC_STOP_UNIT, sizeof(SBC_STOP_UNIT));
+	c.retry = 0;
+	c.opcode[1] |= 1; /* Immed */
+	c.dir = NO_TRANSFER;
+	d->issue_command(d, &c);
+	if (c.error)
+		return 0;
+	ret = spc_wait_unit_attention(d, 1800, "STOP UNIT", 0);
+	d->is_stopped = 1;
+	return ret;
+}
+
+
+
 /* ts A61021 : the sbc specific part of sg.c:enumerate_common()
 */
 int sbc_setup_drive(struct burn_drive *d)
@@ -109,6 +159,8 @@ int sbc_setup_drive(struct burn_drive *d)
 	d->eject = sbc_eject;
 	d->load = sbc_load;
 	d->start_unit = sbc_start_unit;
+	d->stop_unit = sbc_stop_unit;
+	d->is_stopped = 0;
 	return 1;
 }
 

libburn/sector.c

@@ -15,10 +15,14 @@
 #include "sector.h"
 #include "crc.h"
 #include "debug.h"
-#include "lec.h"
 #include "toc.h"
 #include "write.h"
 
+#include "libdax_msgs.h"
+extern struct libdax_msgs *libdax_messenger;
+
+#include "ecma130ab.h"
+
 
 #ifdef Libburn_log_in_and_out_streaM
 /* <<< ts A61031 */
@@ -206,8 +210,7 @@ static unsigned char *get_sector(struct burn_write_opts *opts,
 {
 	struct burn_drive *d = opts->drive;
 	struct buffer *out = d->buffer;
-	int outmode;
-	int seclen;
+	int outmode, seclen;
 	unsigned char *ret;
 
 	outmode = get_outmode(opts);
@@ -223,6 +226,7 @@ static unsigned char *get_sector(struct burn_write_opts *opts,
 	seclen += burn_subcode_length(outmode);
 
 	/* ts A61219 : opts->obs is eventually a 32k trigger for DVD */
+	/* (there is enough buffer size reserve for track->cdxa_conversion) */
 	if (out->bytes + seclen > BUFFER_SIZE ||
 	    (opts->obs > 0 && out->bytes + seclen > opts->obs)) {
 		int err;
@@ -242,7 +246,6 @@ static unsigned char *get_sector(struct burn_write_opts *opts,
 		out->bytes = 0;
 		out->sectors = 0;
 	}
-
 	ret = out->data + out->bytes;
 	out->bytes += seclen;
 	out->sectors++;
@@ -299,7 +302,17 @@ static int convert_data(struct burn_write_opts *o, struct burn_track *track,
 		return 0;
 
 	if ((outmode & BURN_MODE_BITS) == (inmode & BURN_MODE_BITS)) {
+		/* see MMC-5 4.2.3.8.5.3 Block Format for Mode 2 form 1 Data
+		            Table 24  Mode 2 Formed Sector Sub-header Format */
+		if (track != NULL)
+			if (track->cdxa_conversion == 1)
+				inlen += 8;
+
 		get_bytes(track, inlen, data);
+
+		if (track != NULL)
+			if (track->cdxa_conversion == 1)
+				memmove(data, data + 8, inlen - 8);
 		return 1;
 	}
 
@@ -413,7 +426,8 @@ int sector_toc(struct burn_write_opts *o, int mode)
 		return 0;
 	subcode_toc(d, mode, subs);
 	convert_subs(o, mode, subs, data);
-	sector_headers(o, data, mode, 1);
+	if (sector_headers(o, data, mode, 1) <= 0)
+		return 0;
 	sector_common(++)
 	return 1;
 }
@@ -433,7 +447,8 @@ int sector_pregap(struct burn_write_opts *o,
 		return 0;
 	subcode_user(o, subs, tno, control, 0, NULL, 1);
 	convert_subs(o, mode, subs, data);
-	sector_headers(o, data, mode, 0);
+	if (sector_headers(o, data, mode, 0) <= 0)
+		return 0;
 	sector_common(--)
 	return 1;
 }
@@ -450,11 +465,12 @@ int sector_postgap(struct burn_write_opts *o,
 		return 0;
 	/* ts A61010 */
 	if (convert_data(o, NULL, mode, data) <= 0)
-		return 0;;
+		return 0;
 /* use last index in track */
 	subcode_user(o, subs, tno, control, 1, NULL, 1);
 	convert_subs(o, mode, subs, data);
-	sector_headers(o, data, mode, 0);
+	if (sector_headers(o, data, mode, 0) <= 0)
+		return 0;
 	sector_common(++)
 	return 1;
 }
@@ -625,7 +641,8 @@ int sector_lout(struct burn_write_opts *o, unsigned char control, int mode)
 		return 0;
 	subcode_lout(o, control, subs);
 	convert_subs(o, mode, subs, data);
-	sector_headers(o, data, mode, 0);
+	if (sector_headers(o, data, mode, 0) <= 0)
+		return 0;
 	sector_common(++)
 	return 1;
 }
@@ -660,7 +677,8 @@ int sector_data(struct burn_write_opts *o, struct burn_track *t, int psub)
 			     t->entry->control, 1, &t->isrc, psub);
 	convert_subs(o, t->mode, subs, data);
 
-	sector_headers(o, data, t->mode, 0);
+	if (sector_headers(o, data, t->mode, 0) <= 0)
+		return 0;
 	sector_common(++)
 	return 1;
 }
@@ -711,42 +729,27 @@ int sector_headers_is_ok(struct burn_write_opts *o, int mode)
 	return 0;
 }
 
-void sector_headers(struct burn_write_opts *o, unsigned char *out,
+/* ts A90830 : changed return type to int
+   @return 0= failure
+           1= success
+*/
+int sector_headers(struct burn_write_opts *o, unsigned char *out,
 		    int mode, int leadin)
 {
+
+#ifdef Libburn_ecma130ab_includeD
+
 	struct burn_drive *d = o->drive;
 	unsigned int crc;
 	int min, sec, frame;
 	int modebyte = -1;
-
-	/* ts A61009 */
-#if 1
 	int ret;
 
 	ret = sector_headers_is_ok(o, mode);
 	if (ret != 2)
-		return;
+		return !!ret;
 	modebyte = 1;
 
-#else
-
-	if (mode & BURN_AUDIO)	/* no headers for "audio" */
-		return;
-	if (o->write_type == BURN_WRITE_SAO)
-		return;
-
-	/* ts A61031 */
-	if (o->write_type == BURN_WRITE_TAO)
-		return;
-
-	if (mode & BURN_MODE1)
-		modebyte = 1;
-
-#endif
-
-	/* ts A61009 : now ensured by burn_disc_write_is_ok() */
-	/* a ssert(modebyte == 1); */
-
 	out[0] = 0;
 	memset(out + 1, 0xFF, 10);	/* sync */
 	out[11] = 0;
@@ -776,10 +779,33 @@ void sector_headers(struct burn_write_opts *o, unsigned char *out,
 	}
 	if (mode & BURN_MODE1) {
 		memset(out + 2068, 0, 8);
-		parity_p(out);
-		parity_q(out);
+		burn_rspc_parity_p(out);
+		burn_rspc_parity_q(out);
 	}
-	scramble(out);
+	burn_ecma130_scramble(out);
+	return 1;
+
+#else /* Libburn_ecma130ab_includeD */
+
+	int ret;
+
+	ret = sector_headers_is_ok(o, mode);
+	if (ret != 2)
+		return (!! ret);
+
+	/* ts A90830 : lec.c is copied from cdrdao.
+	   I have no idea yet how lec.c implements the Reed-Solomon encoding
+	   which is described in ECMA-130 for CD-ROM.
+	   So this got removed for now.
+	*/
+	libdax_msgs_submit(libdax_messenger, o->drive->global_index,
+				0x0002010a,
+				LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
+				"Raw CD write modes are not supported", 0, 0);
+	return 0;
+
+#endif /* ! Libburn_ecma130ab_includeD */
+
 }
 
 #if 0
@@ -835,12 +861,14 @@ void process_q(struct burn_drive *d, unsigned char *q)
 */
 int sector_identify(unsigned char *data)
 {
-	scramble(data);
+
 /*
+	burn_ecma130_scramble(data);
 check mode byte for 1 or 2
 test parity to see if it's a valid sector
 if invalid, return BURN_MODE_AUDIO;
 else return mode byte  (what about mode 2 formless?  heh)
 */
+
 	return BURN_MODE1;
 }

libburn/sector.h

@@ -22,7 +22,7 @@ int sector_data(struct burn_write_opts *, struct burn_track *t, int psub);
 /* ts A61009 */
 int sector_headers_is_ok(struct burn_write_opts *o, int mode);
 
-void sector_headers(struct burn_write_opts *, unsigned char *,
+int sector_headers(struct burn_write_opts *, unsigned char *,
 		    int mode, int leadin);
 void subcode_user(struct burn_write_opts *, unsigned char *s,
 		  unsigned char tno, unsigned char control,

libburn/sg-dummy.c

@@ -19,6 +19,7 @@ Present implementation: default dummy which enables libburn only to work
 #include <fcntl.h>
 #include <sys/stat.h>
 #include <string.h>
+#include <stdlib.h>
 
 #ifdef Libburn_os_has_statvfS
 #include <sys/statvfs.h>
@@ -227,3 +228,39 @@ int burn_os_stdio_capacity(char *path, off_t *bytes)
 	return 1;
 }
 
+
+/* ts A91122 : an interface to open(O_DIRECT) or similar OS tricks. */
+
+#ifdef Libburn_read_o_direcT
+
+	/* No special O_DIRECT-like precautions are implemented here */
+
+#endif /* Libburn_read_o_direcT */
+
+
+int burn_os_open_track_src(char *path, int open_flags, int flag)
+{
+	int fd;
+
+	fd = open(path, open_flags);
+	return fd;
+}
+
+
+void *burn_os_alloc_buffer(size_t amount, int flag)
+{
+	void *buf = NULL;
+
+	buf = calloc(1, amount);
+	return buf;
+}
+
+
+int burn_os_free_buffer(void *buffer, size_t amount, int flag)
+{
+	if (buffer == NULL)
+		return 0;
+	free(buffer);
+	return 1;
+}
+

libburn/sg-freebsd-port.c

@@ -629,3 +629,39 @@ int burn_os_stdio_capacity(char *path, off_t *bytes)
 	return 1;
 }
 
+
+/* ts A91122 : an interface to open(O_DIRECT) or similar OS tricks. */
+
+#ifdef Libburn_read_o_direcT
+
+	/* No special O_DIRECT-like precautions are implemented here */
+
+#endif /* Libburn_read_o_direcT */
+
+
+int burn_os_open_track_src(char *path, int open_flags, int flag)
+{
+	int fd;
+
+	fd = open(path, open_flags);
+	return fd;
+}
+
+
+void *burn_os_alloc_buffer(size_t amount, int flag)
+{
+	void *buf = NULL;
+
+	buf = calloc(1, amount);
+	return buf;
+}
+
+
+int burn_os_free_buffer(void *buffer, size_t amount, int flag)
+{
+	if (buffer == NULL)
+		return 0;
+	free(buffer);
+	return 1;
+}
+

libburn/sg-freebsd.c

@@ -72,6 +72,8 @@ static int sg_init_enumerator(burn_drive_enumerator_t *idx_)
 
 	if ((idx->fd = open(XPT_DEVICE, O_RDWR)) == -1) {
 		warn("couldn't open %s", XPT_DEVICE);
+		free(idx);
+		idx = NULL;
 		return -1;
 	}
 
@@ -686,3 +688,39 @@ int burn_os_stdio_capacity(char *path, off_t *bytes)
 	return 1;
 }
 
+
+/* ts A91122 : an interface to open(O_DIRECT) or similar OS tricks. */
+
+#ifdef Libburn_read_o_direcT
+
+	/* No special O_DIRECT-like precautions are implemented here */
+
+#endif /* Libburn_read_o_direcT */
+
+
+int burn_os_open_track_src(char *path, int open_flags, int flag)
+{
+	int fd;
+
+	fd = open(path, open_flags);
+	return fd;
+}
+
+
+void *burn_os_alloc_buffer(size_t amount, int flag)
+{
+	void *buf = NULL;
+
+	buf = calloc(1, amount);
+	return buf;
+}
+
+
+int burn_os_free_buffer(void *buffer, size_t amount, int flag)
+{
+	if (buffer == NULL)
+		return 0;
+	free(buffer);
+	return 1;
+}
+

libburn/sg-linux.c

@@ -1,5 +1,11 @@
 /* -*- indent-tabs-mode: t; tab-width: 8; c-basic-offset: 8; -*- */
 
+
+/* <<< ts A91112 : experiments to get better speed with USB
+#define Libburn_sgio_as_growisofS 1
+*/
+
+
 /*
 
 This is the main operating system dependent SCSI part of libburn. It implements
@@ -48,8 +54,23 @@ sg_issue_command()      sends a SCSI command to the drive, receives reply,
 
 sg_obtain_scsi_adr()    tries to obtain SCSI address parameters.
 
+
 burn_os_stdio_capacity()  estimates the emulated media space of stdio-drives.
 
+burn_os_open_track_src()  opens a disk file in a way that allows best
+                        throughput with file reading and/or SCSI write command
+                        transmission.
+
+burn_os_close_track_src()  closes a filedescriptor obtained by
+                        burn_os_open_track_src().
+
+burn_os_alloc_buffer()  allocates a memory area that is suitable for file
+                        descriptors issued by burn_os_open_track_src().
+                        The buffer size may be rounded up for alignment
+                        reasons.
+
+burn_os_free_buffer()   delete a buffer obtained by burn_os_alloc_buffer().
+
 
 Porting hints are marked by the text "PORTING:".
 Send feedback to libburn-hackers@pykix.org .
@@ -62,6 +83,13 @@ Hint: You should also look into sg-freebsd-port.c, which is a younger and
 
 /** PORTING : ------- OS dependent headers and definitions ------ */
 
+
+#ifdef Libburn_read_o_direcT
+# ifndef _GNU_SOURCE
+#  define _GNU_SOURCE
+# endif
+#endif /* Libburn_read_o_direcT */
+
 #include <errno.h>
 #include <unistd.h>
 #include <stdio.h>
@@ -80,6 +108,9 @@ Hint: You should also look into sg-freebsd-port.c, which is a younger and
 /* for ioctl(BLKGETSIZE) */
 #include <linux/fs.h>
 
+/* for mmap() */
+#include <sys/mman.h>
+
 
 #include <scsi/sg.h>
 /* Values within sg_io_hdr_t indicating success after ioctl(SG_IO) : */
@@ -158,9 +189,17 @@ static char linux_ata_device_family[80] = {"/dev/hd%c"};
 static int linux_ata_enumerate_verbous = 0;
 
 
+/* The waiting time before eventually retrying a failed SCSI command.
+   Before each retry wait Libburn_sg_linux_retry_incR longer than with
+   the previous one.
+*/
+#define Libburn_sg_linux_retry_usleeP 100000
+#define Libburn_sg_linux_retry_incR   100000
+
 
 /** PORTING : ------ libburn portable headers and definitions ----- */
 
+#include "libburn.h"
 #include "transport.h"
 #include "drive.h"
 #include "sg.h"
@@ -189,17 +228,25 @@ static void enumerate_common(char *fname, int bus_no, int host_no,
 
 
 /* ts A60813 : storage objects are in libburn/init.c
-   wether to use O_EXCL with open(2) of devices
-   wether to use fcntl(,F_SETLK,) after open(2) of devices
+   whether to use O_EXCL with open(2) of devices
+   whether to use fcntl(,F_SETLK,) after open(2) of devices
    what device family to use : 0=default, 1=sr, 2=scd, (3=st), 4=sg
-   wether to use O_NOBLOCK with open(2) on devices
-   wether to take O_EXCL rejection as fatal error */
+   whether to use O_NOBLOCK with open(2) on devices
+   whether to take O_EXCL rejection as fatal error
+*/
 extern int burn_sg_open_o_excl;
 extern int burn_sg_fcntl_f_setlk;
 extern int burn_sg_use_family;
 extern int burn_sg_open_o_nonblock;
 extern int burn_sg_open_abort_busy;
 
+/* ts A91111 :
+   whether to log SCSI commands:
+   bit0= log in /tmp/libburn_sg_command_log
+   bit1= log to stderr
+   bit2= flush every line
+*/
+extern int burn_sg_log_scsi;
 
 /* ts A60821
    debug: for tracing calls which might use open drive fds
@@ -1635,6 +1682,7 @@ int sg_release(struct burn_drive *d)
 }
 
 
+/* <<< ts A91111: on its way out */
 /** ts A70518: 
     Debugging log facility. Controlled by existence of macros:
      Libburn_log_sg_commandS          enables logging to file
@@ -1643,29 +1691,29 @@ int sg_release(struct burn_drive *d)
      Libburn_log_sg_command_stderR    enables additional log to stderr
 */
 /*
+ ts A91111: now enabled by default and controlled burn_sg_log_scsi
+*/
 #define Libburn_log_sg_commandS 1
 #define Libburn_fflush_log_sg_commandS 1
 #define Libburn_log_sg_command_stderR 1
-*/
+
 
 #ifdef Libburn_log_sg_commandS
 
 /** Logs command (before execution) */
 static int sg_log_cmd(struct command *c, FILE *fp, int flag)
 {
-	int i;
+	if (fp != NULL && (fp == stderr || (burn_sg_log_scsi & 1))) {
+		scsi_show_cmd_text(c, fp, 0);
 
-	if (fp != NULL) {
-		for(i = 0; i < 16 && i < c->oplen; i++)
-  			fprintf(fp,"%2.2x ", c->opcode[i]);
-		fprintf(fp, "\n");
 #ifdef Libburn_fflush_log_sg_commandS
-		fflush(fp);
+		if (burn_sg_log_scsi & 4)
+			fflush(fp);
 #endif
 	}
-	if (fp == stderr)
-		return 1;
 #ifdef Libburn_log_sg_command_stderR
+	if (fp == stderr || !(burn_sg_log_scsi & 2))
+		return 1;
 	sg_log_cmd(c, stderr, flag);
 #endif
 	return 1;
@@ -1677,20 +1725,23 @@ static int sg_log_err(struct command *c, FILE *fp,
 		sg_io_hdr_t *s,
 		int flag)
 {
-      	if(fp!=NULL) {
-		if(flag & 1)
+      	if(fp != NULL && (fp == stderr || (burn_sg_log_scsi & 1))) {
+		if(flag & 1) {
   			fprintf(fp,
 			"+++ key=%X  asc=%2.2Xh  ascq=%2.2Xh   (%6d ms)\n",
 				s->sbp[2], s->sbp[12], s->sbp[13],s->duration);
-		else
+		} else {
+			scsi_show_cmd_reply(c, fp, 0);
 			fprintf(fp,"%6d ms\n", s->duration);
+		}
 #ifdef Libburn_fflush_log_sg_commandS
-		fflush(fp);
+		if (burn_sg_log_scsi & 4)
+			fflush(fp);
 #endif
 	}
-	if (fp == stderr)
-		return 1;
 #ifdef Libburn_log_sg_command_stderR
+	if (fp == stderr || !(burn_sg_log_scsi & 2))
+		return 1;
 	sg_log_err(c, stderr, s, flag);
 #endif
 	return 1;
@@ -1711,8 +1762,9 @@ static int sg_log_err(struct command *c, FILE *fp,
 */
 int sg_issue_command(struct burn_drive *d, struct command *c)
 {
-	int done = 0, no_c_page = 0;
+	int done = 0, no_c_page = 0, usleep_time, i;
 	int err;
+	time_t start_time;
 	sg_io_hdr_t s;
 
 #ifdef Libburn_log_sg_commandS
@@ -1729,11 +1781,15 @@ int sg_issue_command(struct burn_drive *d, struct command *c)
 
 #ifdef Libburn_log_sg_commandS
 	/* ts A61030 */
-	if(fp==NULL) {
-		fp= fopen("/tmp/libburn_sg_command_log","a");
-		fprintf(fp,"\n-----------------------------------------\n");
+	if (burn_sg_log_scsi & 1) {
+		if (fp == NULL) {
+			fp= fopen("/tmp/libburn_sg_command_log", "a");
+			fprintf(fp,
+			    "\n-----------------------------------------\n");
+		}
 	}
-	sg_log_cmd(c,fp,0);
+	if (burn_sg_log_scsi & 3)
+		sg_log_cmd(c,fp,0);
 #endif /* Libburn_log_sg_commandS */
 	  
 
@@ -1748,6 +1804,13 @@ int sg_issue_command(struct burn_drive *d, struct command *c)
 
 	s.interface_id = 'S';
 
+#ifdef Libburn_sgio_as_growisofS
+	/* ??? ts A91112 : does this speed up USB ? (from growisofs)
+	--- did not help
+	 */
+	s.flags = SG_FLAG_DIRECT_IO;
+#endif /* Libburn_sgio_as_growisofS */
+
 	if (c->dir == TO_DRIVE)
 		s.dxfer_direction = SG_DXFER_TO_DEV;
 	else if (c->dir == FROM_DRIVE)
@@ -1796,7 +1859,8 @@ int sg_issue_command(struct burn_drive *d, struct command *c)
 	}
 	s.usr_ptr = c;
 
-	do {
+	start_time = time(NULL);
+	for(i = 0; !done; i++) {
 		err = ioctl(d->fd, SG_IO, &s);
 
 		/* ts A61010 */
@@ -1830,10 +1894,22 @@ int sg_issue_command(struct burn_drive *d, struct command *c)
 				c->error = 1;
 				break;
 			}
+
+			/* ts A90921 :
+			   Calming down retries and breaking up endless cycle
+			*/
+			usleep_time = Libburn_sg_linux_retry_usleeP +
+					i * Libburn_sg_linux_retry_incR;
+			if (time(NULL) + usleep_time / 1000000 - start_time >
+			    s.timeout / 1000 + 1) {
+				c->error = 1;
+				goto ex;
+			}
+			usleep(usleep_time);
 		} else {
 			done = 1;
 		}
-	} while (!done);
+	}
 
 	/* ts A61106 */
 ex:;
@@ -1857,7 +1933,8 @@ ex:;
 	}
 
 #ifdef Libburn_log_sg_commandS
-	sg_log_err(c, fp, &s, c->error != 0);
+	if (burn_sg_log_scsi & 3)
+		sg_log_err(c, fp, &s, c->error != 0);
 #endif /* Libburn_log_sg_commandS */
 
 	return 1;
@@ -1878,6 +1955,8 @@ int sg_obtain_scsi_adr(char *path, int *bus_no, int *host_no, int *channel_no,
 	};
  	struct my_scsi_idlun idlun;
 
+	/* valgrind called idlun unitialized because it is blind for ioctl */
+	memset(&idlun, 0, sizeof(struct my_scsi_idlun));
 
 	l = strlen(linux_ata_device_family) - 2;
 	if (l > 0 && strncmp(path, linux_ata_device_family, l) == 0 
@@ -2010,3 +2089,80 @@ int burn_os_stdio_capacity(char *path, off_t *bytes)
 	return 1;
 }
 
+
+/* ts A91122 : an interface to open(O_DIRECT) or similar OS tricks. */
+
+#ifdef PROT_READ
+#ifdef PROT_WRITE
+#ifdef MAP_SHARED
+#ifdef MAP_ANONYMOUS
+#ifdef MAP_FAILED
+#define Libburn_linux_do_mmaP 1
+#endif
+#endif
+#endif
+#endif
+#endif
+
+#ifdef Libburn_read_o_direcT
+#ifdef O_DIRECT
+#define Libburn_linux_do_o_direcT 1
+#endif
+#endif /* Libburn_read_o_direcT */
+
+
+int burn_os_open_track_src(char *path, int open_flags, int flag)
+{
+	int fd;
+
+#ifdef Libburn_linux_do_o_direcT
+	libdax_msgs_submit(libdax_messenger, -1, 0x00000002,
+		LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_HIGH,
+		"Opening track source with O_DIRECT" , 0, 0);
+	fd = open(path, open_flags | O_DIRECT);
+#else
+	fd = open(path, open_flags);
+#endif
+	return fd;
+}
+
+
+void *burn_os_alloc_buffer(size_t amount, int flag)
+{
+	void *buf = NULL;
+
+#ifdef Libburn_linux_do_mmaP
+
+	/* >>> check whether size is suitable */;
+
+	libdax_msgs_submit(libdax_messenger, -1, 0x00000002,
+		LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_HIGH,
+		"Allocating buffer via mmap()" , 0, 0);
+	buf = mmap(NULL, amount, PROT_READ | PROT_WRITE,
+			 	MAP_SHARED | MAP_ANONYMOUS, -1, (off_t) 0);
+	if (buf == MAP_FAILED)
+		buf = NULL;
+	else
+		memset(buf, 0, amount);
+#else
+	buf = calloc(1, amount);
+#endif /* ! Libburn_linux_do_mmaP */
+
+	return buf;
+}
+
+
+int burn_os_free_buffer(void *buffer, size_t amount, int flag)
+{
+	int ret = 0;
+
+	if (buffer == NULL)
+		return 0;
+#ifdef Libburn_linux_do_mmaP
+	ret = munmap(buffer, amount);
+#else
+	free(buffer);
+#endif
+	return (ret == 0);
+}
+

libburn/spc.c

@@ -27,11 +27,6 @@
 #include "libdax_msgs.h"
 extern struct libdax_msgs *libdax_messenger;
 
-/* ts A70910
-   debug: for tracing calls which might use open drive fds
-          or for catching SCSI usage of emulated drives. */
-int mmc_function_spy(struct burn_drive *d, char * text);
-
 
 /* spc command set */
 /* ts A70519 : allocation length byte 3+4 was 0,255 */
@@ -98,7 +93,9 @@ int spc_test_unit_ready(struct burn_drive *d)
 
 
 /* ts A70315 */
-/** @param flag bit0=do not wait 0.1 seconds before first test unit ready */
+/** @param flag bit0=do not wait 0.1 seconds before first test unit ready
+                bit1=do not issue success message
+ */
 /** Wait until the drive state becomes clear or until max_usec elapsed */
 int spc_wait_unit_attention(struct burn_drive *d, int max_sec, char *cmd_text,
 				int flag)
@@ -112,13 +109,6 @@ int spc_wait_unit_attention(struct burn_drive *d, int max_sec, char *cmd_text,
 		usleep(100000);
 	for(i = !(flag & 1); i < max_sec * 10; i++) {
 		ret = spc_test_unit_ready_r(d, &key, &asc, &ascq);
-
-/* <<< 
-		fprintf(stderr,
-"libburn_EXPERIMENTAL: i= %d  ret= %d  key= %X  asc= %2.2X  ascq= %2.2X\n",
-		i, ret, (unsigned) key, (unsigned) asc, (unsigned) ascq);
-*/
-
 		if (ret > 0) /* ready */
 	break;
 		if (key!=0x2 || asc!=0x4) {
@@ -140,24 +130,14 @@ int spc_wait_unit_attention(struct burn_drive *d, int max_sec, char *cmd_text,
 				/* media change notice = try again */
 				goto slumber;
 
-#ifdef NIX
-			sprintf(msg,
-		"Asynchromous SCSI error on %s: key=%X asc=%2.2Xh ascq=%2.2Xh",
-			 	cmd_text, (unsigned) key, (unsigned) asc,
-				(unsigned) ascq);
-#else
-
 			/* ts A90213 */
 			sprintf(msg,
-				"Asynchromous SCSI error on %s: ", cmd_text);
+				"Asynchronous SCSI error on %s: ", cmd_text);
 			sense[2] = key;
 			sense[12] = asc;
 			sense[13] = ascq;
 			resp = scsi_error_msg(d, sense, 14, msg + strlen(msg),
 						 &key, &asc, &ascq);
-
-#endif /* ! NIX */
-
 			libdax_msgs_submit(libdax_messenger, d->global_index,
 				0x0002014d,
 				LIBDAX_MSGS_SEV_SORRY, LIBDAX_MSGS_PRIO_HIGH,
@@ -168,11 +148,14 @@ int spc_wait_unit_attention(struct burn_drive *d, int max_sec, char *cmd_text,
 slumber:;
 		usleep(100000);
 	}
-
-	sprintf(msg, "Async %s %s after %d.%d seconds",
-		cmd_text, (ret > 0 ? "succeeded" : "failed"), i / 10, i % 10);
-	libdax_msgs_submit(libdax_messenger, d->global_index, 0x00020150,
-		LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_LOW, msg, 0, 0);
+	if (ret <= 0 || !(flag & 2)) {
+		sprintf(msg, "Async %s %s after %d.%d seconds",
+			cmd_text, (ret > 0 ? "succeeded" : "failed"),
+			i / 10, i % 10);
+		libdax_msgs_submit(libdax_messenger, d->global_index,
+			 0x00020150, LIBDAX_MSGS_SEV_DEBUG,
+			 LIBDAX_MSGS_PRIO_LOW, msg, 0, 0);
+	}
 
 	if (i < max_sec * 10)
 		return (ret > 0);
@@ -262,14 +245,14 @@ void spc_prevent(struct burn_drive *d)
 		return;
 
 	scsi_init_command(&c, SPC_PREVENT, sizeof(SPC_PREVENT));
-/*
-	memcpy(c.opcode, SPC_PREVENT, sizeof(SPC_PREVENT));
-	c.oplen = sizeof(SPC_PREVENT);
-	c.page = NULL;
-*/
 	c.retry = 1;
 	c.dir = NO_TRANSFER;
 	d->issue_command(d, &c);
+
+#ifdef Libburn_pioneer_dvr_216d_get_evenT
+        mmc_get_event(d);
+#endif
+
 }
 
 void spc_allow(struct burn_drive *d)
@@ -463,12 +446,24 @@ static int spc_sense_caps_al(struct burn_drive *d, int *alloc_len, int flag)
 		m->min_write_speed, m->max_write_speed);
 
 try_mmc_get_performance:;
-	ret = mmc_get_write_performance(d);
-
-	if (ret > 0 && speed_debug)
-		fprintf(stderr,
+	if (m->cdrw_write || page_length >= 32) {
+		/* ts A90823:
+		   One has to avoid U3 enhanced memory sticks here. On my
+		   SuSE 10.2 a SanDisk Cruzer 4GB stalls at the second occasion
+		   of ACh GET PERFORMANCE. (The first one is obviously called
+		   by the OS at plug time.)
+		   This pseudo drive returns no write capabilities and a page
+		   length of 28. MMC-3 describes page length 32. Regrettably
+		   MMC-2 prescribes a page length of 26. Here i have to trust
+		   m->cdrw_write to reliably indicate any MMC-2 burner.
+		*/
+		ret = mmc_get_write_performance(d);
+		if (ret > 0 && speed_debug)
+			fprintf(stderr,
 	  "LIBBURN_DEBUG: ACh min_write_speed = %d , max_write_speed = %d\n",
-		m->min_write_speed, m->max_write_speed);
+			m->min_write_speed, m->max_write_speed);
+	}
+
 	return !was_error;
 }
 
@@ -477,6 +472,7 @@ void spc_sense_caps(struct burn_drive *d)
 {
 	int alloc_len, start_len = 30, ret;
 
+	mmc_start_if_needed(d, 1);
 	if (mmc_function_spy(d, "sense_caps") <= 0)
 		return;
 
@@ -501,6 +497,7 @@ void spc_sense_error_params(struct burn_drive *d)
 	unsigned char *page;
 	struct command c;
 
+	mmc_start_if_needed(d, 1);
 	if (mmc_function_spy(d, "sense_error_params") <= 0)
 		return;
 
@@ -534,6 +531,7 @@ void spc_select_error_params(struct burn_drive *d,
 	struct buffer buf;
 	struct command c;
 
+	mmc_start_if_needed(d, 1);
 	if (mmc_function_spy(d, "select_error_params") <= 0)
 		return;
 
@@ -575,6 +573,7 @@ void spc_sense_write_params(struct burn_drive *d)
 	unsigned char *page;
 	struct command c;
 
+	mmc_start_if_needed(d, 1);
 	if (mmc_function_spy(d, "sense_write_params") <= 0)
 		return;
 
@@ -638,7 +637,9 @@ void spc_select_write_params(struct burn_drive *d,
 {
 	struct buffer buf;
 	struct command c;
+	int alloc_len;
 
+	mmc_start_if_needed(d, 1);
 	if (mmc_function_spy(d, "select_write_params") <= 0)
 		return;
 
@@ -652,13 +653,33 @@ void spc_select_write_params(struct burn_drive *d,
 		o->block_type,spc_block_type(o->block_type));
 	*/
 
-	scsi_init_command(&c, SPC_MODE_SELECT, sizeof(SPC_MODE_SELECT));
-/*
-	memcpy(c.opcode, SPC_MODE_SELECT, sizeof(SPC_MODE_SELECT));
-	c.oplen = sizeof(SPC_MODE_SELECT);
-*/
+	alloc_len = 8 + 2 + d->mdata->write_page_length;
+	memset(&(buf.data), 0, alloc_len);
+
+#ifdef Libburn_pioneer_dvr_216d_load_mode5
+
+	scsi_init_command(&c, SPC_MODE_SENSE, sizeof(SPC_MODE_SENSE));
+	c.dxfer_len = alloc_len;
+	c.opcode[7] = (alloc_len >> 8) & 0xff;
+	c.opcode[8] = alloc_len & 0xff;
 	c.retry = 1;
-	c.opcode[8] = 8 + 2 + d->mdata->write_page_length;
+	c.opcode[2] = 0x05;
+	c.page = &buf;
+	c.page->bytes = 0;
+	c.page->sectors = 0;
+	c.dir = FROM_DRIVE;
+	d->issue_command(d, &c);
+
+	if (c.error) 
+		memset(&(buf.data), 0,
+				8 + 2 + d->mdata->write_page_length);
+
+#endif /* Libburn_pioneer_dvr_216d_load_mode5 */
+
+	scsi_init_command(&c, SPC_MODE_SELECT, sizeof(SPC_MODE_SELECT));
+	c.retry = 1;
+	c.opcode[7] = (alloc_len >> 8) & 0xff;
+	c.opcode[8] = alloc_len & 0xff;
 	c.page = &buf;
 	c.page->bytes = 0;
 	c.page->sectors = 0;
@@ -666,8 +687,7 @@ void spc_select_write_params(struct burn_drive *d,
 	/* ts A61007 : moved up to burn_disc_write() */
 	/* a ssert(d->mdata->valid); */
 
-	memset(c.page->data, 0, 8 + 2 + d->mdata->write_page_length);
-	c.page->bytes = 8 + 2 + d->mdata->write_page_length;
+	c.page->bytes = alloc_len;
 
 	burn_print(12, "using write page length %d (valid %d)\n",
 		   d->mdata->write_page_length, d->mdata->write_page_valid);
@@ -704,6 +724,7 @@ void spc_probe_write_modes(struct burn_drive *d)
 	int last_try = 0;
 	struct command c;
 
+	mmc_start_if_needed(d, 1);
 	if (mmc_function_spy(d, "spc_probe_write_modes") <= 0)
 		return;
 
@@ -721,11 +742,8 @@ void spc_probe_write_modes(struct burn_drive *d)
 			try_block_type = useable_block_type;
 			last_try= 1;
 		}
+
 		scsi_init_command(&c, SPC_MODE_SELECT,sizeof(SPC_MODE_SELECT));
-/*
-		memcpy(c.opcode, SPC_MODE_SELECT, sizeof(SPC_MODE_SELECT));
-		c.oplen = sizeof(SPC_MODE_SELECT);
-*/
 		c.retry = 1;
 		c.opcode[8] = 8 + 2 + 0x32;
 		c.page = &buf;
@@ -754,7 +772,6 @@ void spc_probe_write_modes(struct burn_drive *d)
 		key = c.sense[2];
 		asc = c.sense[12];
 		ascq = c.sense[13];
-
 		if (key)
 			burn_print(7, "%d not supported\n", try_block_type);
 		else {
@@ -800,6 +817,7 @@ void spc_probe_write_modes(struct burn_drive *d)
 			return;
 		}
 	}
+
 }
 
 /* ( ts A61229 : shouldn't this go to mmc.c too ?) */
@@ -1130,6 +1148,11 @@ enum response scsi_error_msg(struct burn_drive *d, unsigned char *sense,
 			sprintf(msg, "Medium not present");
 		d->status = BURN_DISC_EMPTY;
 		return FAIL;
+	case 0x57:
+		if (*key != 3 || *ascq != 0)
+			break;
+		sprintf(msg, "Unable to recover Table-of-Content");
+		return FAIL;
 	case 0x63:
 		if (*key != 5)
 			break;
@@ -1217,10 +1240,14 @@ static char *scsi_command_name(unsigned int c, int flag)
 		return "FORMAT UNIT";
         case 0x1b:
 		return "START/STOP UNIT";
+	case 0x12:
+		return "INQUIRY";
 	case 0x1e:
 		return "PREVENT/ALLOW MEDIA REMOVAL";
         case 0x23:
 		return "READ FORMAT CAPACITIES";
+        case 0x25:
+		return "READ CAPACITY";
         case 0x28:
 		return "READ(10)";
         case 0x2a:
@@ -1244,7 +1271,7 @@ static char *scsi_command_name(unsigned int c, int flag)
         case 0x55:
 		return "MODE SELECT";
 	case 0x5a:
-		return "SEND OPC INFORMATION";
+		return "MODE SENSE";
         case 0x5b:
 		return "CLOSE TRACK/SESSION";
         case 0x5c:
@@ -1257,6 +1284,8 @@ static char *scsi_command_name(unsigned int c, int flag)
 		return "WRITE(12)";
         case 0xac:
 		return "GET PERFORMANCE";
+        case 0xad:
+		return "READ DISC STRUCTURE";
         case 0xb6:
 		return "SET STREAMING";
         case 0xbb:
@@ -1320,3 +1349,66 @@ int scsi_notify_error(struct burn_drive *d, struct command *c,
 	return ret;
 }
 
+
+/* ts A91106 */
+/* @param flag bit0= do not show eventual data payload sent to the drive
+                     (never with WRITE commands)
+               bit1= show write length and target LBA in decimal
+*/
+int scsi_show_cmd_text(struct command *c, void *fp_in, int flag)
+{
+	int i;
+	FILE *fp = fp_in;
+
+	fprintf(fp, "\n%s\n",
+		 scsi_command_name((unsigned int) c->opcode[0], 0));
+	for(i = 0; i < 16 && i < c->oplen; i++)
+		fprintf(fp, "%2.2x ", c->opcode[i]);
+	if (i > 0)
+		fprintf(fp, "\n");
+	if (flag & 1)
+		return 1;
+	if (c->opcode[0] == 0x2A) { /* WRITE 10 */
+		if (flag & 2)
+			fprintf(fp, "%d -> %d\n",
+				(c->opcode[7] << 8) | c->opcode[8], 
+				mmc_four_char_to_int(c->opcode + 2));
+	} else if (c->opcode[0] == 0xAA) { /* WRITE 12 */
+		if (flag & 2)
+			fprintf(fp, "%d -> %d\n",
+				mmc_four_char_to_int(c->opcode + 6),
+				mmc_four_char_to_int(c->opcode + 2));	
+	} else if (c->dir == TO_DRIVE) {
+		fprintf(fp, "To drive: %db\n", c->page->bytes);
+		for (i = 0; i < c->page->bytes; i++) 
+			fprintf(fp, "%2.2x%c", c->page->data[i],
+				((i % 20) == 19 ? '\n' : ' '));
+		if (i % 20)
+			fprintf(fp, "\n");
+	}
+	return 1;
+}
+
+/* ts A91106 */
+int scsi_show_cmd_reply(struct command *c, void *fp_in, int flag)
+{
+	int i;
+	FILE *fp = fp_in;
+
+	if (c->dir != FROM_DRIVE)
+		return 2;
+	if (c->opcode[0] == 0x28 || c->opcode[0] == 0x3C ||
+	    c->opcode[0] == 0xA8 || c->opcode[0] == 0xBE) {
+							/* READ commands */
+		/* >>> report amount of data */;
+
+		return 2;
+	}
+	fprintf(fp, "From drive: %db\n", c->dxfer_len);
+	for (i = 0; i < c->dxfer_len; i++)
+		fprintf(fp, "%2.2x%c", c->page->data[i],
+			((i % 20) == 19 ? '\n' : ' '));
+	if (i % 20)
+		fprintf(fp, "\n");
+	return 1;
+}

libburn/spc.h

@@ -59,4 +59,11 @@ int scsi_notify_error(struct burn_drive *, struct command *c,
 /* ts A70519 */
 int scsi_init_command(struct command *c, unsigned char *opcode, int oplen);
 
+/* ts A91106 */
+int scsi_show_cmd_text(struct command *c, void *fp, int flag);
+
+/* ts A91106 */
+int scsi_show_cmd_reply(struct command *c, void *fp, int flag);
+
+
 #endif /*__SPC*/

libburn/structure.c

@@ -281,13 +281,23 @@ void burn_track_define_data(struct burn_track *t, int offset, int tail,
 /* ts A61024 */
 int burn_track_set_byte_swap(struct burn_track *t, int swap_source_bytes)
 {
-	if(swap_source_bytes!=0 && swap_source_bytes!=1)
+	if (swap_source_bytes != 0 && swap_source_bytes != 1)
 		return 0;
 	t->swap_source_bytes = swap_source_bytes;
 	return 1;
 }
 
 
+/* ts A90911 : API */
+int burn_track_set_cdxa_conv(struct burn_track *t, int value)
+{
+	if (value < 0 || value > 1)
+		return 0;
+	t->cdxa_conversion = value;
+	return 1;
+}
+
+
 void burn_track_set_isrc(struct burn_track *t, char *country, char *owner,
 			 unsigned char year, unsigned int serial)
 {
@@ -358,6 +368,11 @@ int burn_track_get_sectors(struct burn_track *t)
 	int sectors, seclen;
 
 	seclen = burn_sector_length(t->mode);
+
+	if (t->cdxa_conversion == 1)
+		/* ts A90911 : will read blocks of 2056 bytes and write 2048 */
+		seclen += 8;
+
 	if (t->source != NULL)                /* ts A80808 : mending sigsegv */
 		size = t->offset + t->source->get_size(t->source) + t->tail;
 	else if(t->entry != NULL) {

libburn/structure.h

@@ -64,6 +64,10 @@ struct burn_track
 	/* ts A61024 */
 	/** Byte swapping on source data stream : 0=none , 1=pairwise */
 	int swap_source_bytes;
+
+	/* ts A90910 : conversions from CD XA prepared input */
+	int cdxa_conversion; /* 0=none, 1=remove -xa1 headers (first 8 bytes)*/
+
 };
 
 struct burn_session

libburn/transport.h

@@ -40,7 +40,9 @@ struct buffer
 	   Added 4096 bytes reserve against possible buffer overflows.
 	   (Changed in sector.c buffer flush test from >= to > BUFFER_SIZE .
 	    This can at most cause a 1 sector overlap. Sometimes an offset
-	    of 16 byte is applied to the output data (in some RAW mode). ) */
+	    of 16 byte is applied to the output data (in some RAW mode). )
+	    burn_write_opts.cdxa_conversion can imply an offset of 8 bytes.
+	 */
 	unsigned char data[BUFFER_SIZE + 4096];
 	int sectors;
 	int bytes;
@@ -163,6 +165,9 @@ struct burn_drive
 	int current_is_supported_profile;
 	/* ts A90603 */
 	int current_is_guessed_profile;
+	/* ts A90815 */
+	unsigned char all_profiles[256];
+	int num_profiles;
 
 	/* ts A70128 : MMC-to-MMC feature info from 46h for DVD-RW.
            Quite internal. Regard as opaque :)
@@ -213,7 +218,19 @@ struct burn_drive
         int stream_recording_start;
 
 	/* ts A61218 from 51h READ DISC INFORMATION */
+	int last_lead_in;
+	int last_lead_out;
+	int num_opc_tables;   /* ts A91104: -1= not yet known */
 	int bg_format_status; /* 0=needs format start, 1=needs format restart*/
+	int disc_type; /* 0="CD-DA or CD-ROM", 0x10="CD-I", 0x20="CD-ROM XA" */
+	unsigned int disc_id; /* a "32 bit binary integer" */
+	char disc_bar_code[9];
+	int disc_app_code;
+	int disc_info_valid;  /* bit0= disc_type ,     bit1= disc_id ,
+				 bit2= disc_bar_code , bit3= disc_app_code
+				 bit4= URU bit is set (= unrestricted use)
+				 bit5= Erasable bit was set in reply
+			       */
 
 	/* ts A70108 from 23h READ FORMAT CAPACITY mmc5r03c.pdf 6.24 */
 	int format_descr_type;      /* 1=unformatted, 2=formatted, 3=unclear */
@@ -314,6 +331,11 @@ struct burn_drive
 	void (*eject) (struct burn_drive *);
 	void (*load) (struct burn_drive *);
 	int (*start_unit) (struct burn_drive *);
+
+	/* ts A90824 : Calming down noisy drives */
+	int (*stop_unit) (struct burn_drive *);
+	int is_stopped;
+
 	void (*read_disc_info) (struct burn_drive *);
 	void (*read_sectors) (struct burn_drive *,
 			      int start,

libburn/util.c

@@ -4,6 +4,7 @@
 /* #include <a ssert.h> */
 
 #include <stdlib.h>
+#include <stdio.h>
 
 /* ts A80914 : This is unneeded. Version info comes from libburn.h.
 #include "v ersion.h"
@@ -56,3 +57,264 @@ void burn_version(int *major, int *minor, int *micro)
 	*minor = burn_header_version_minor;
 	*micro = burn_header_version_micro;
 }
+
+
+struct cd_mid_record {
+	char *manufacturer;
+	int m_li;
+	int s_li;
+	int f_li;
+	int m_lo;
+	int s_lo;
+	int f_lo;
+	char *other_brands;
+};
+typedef struct cd_mid_record cd_mid_record_t;
+
+
+/* ts A90902 */
+/** API
+   @param flag  Bitfield for control purposes,
+                bit0= append "(aka %s)",other_brands to reply
+ */
+char *burn_guess_cd_manufacturer(int m_li, int s_li, int f_li,
+                                 int m_lo, int s_lo, int f_lo, int flag)
+{
+	static cd_mid_record_t mid_list[]= {
+	{"SKC",                                 96, 40,  0,  0, 0, 0, ""},
+	{"Ritek Corp"                         , 96, 43, 30,  0, 0, 0, ""},
+	{"TDK / Ritek"                        , 97, 10,  0,  0, 0, 0, "TRAXDATA"},
+	{"TDK Corporation"                    , 97, 15,  0,  0, 0, 0, ""},
+	{"Ritek Corp"                         , 97, 15, 10,  0, 0, 0, "7-plus, Aopen, PONY, Power Source, TDK, TRAXDATA, HiCO, PHILIPS, Primdisc, Victor.JVC, OPTI STORAGE, Samsung"},
+	{"Mitsubishi Chemical Corporation"    , 97, 15, 20,  0, 0, 0, ""},
+	{"Nan-Ya Plastics Corporation"        , 97, 15, 30,  0, 0, 0, "Hatron, MMore, Acer, LITEON"},
+	{"Delphi"                             , 97, 15, 50,  0, 0, 0, ""},
+	{"Shenzhen SG&SAST"                   , 97, 16, 20,  0, 0, 0, ""},
+	{"Moser Baer India Limited"           , 97, 17,  0,  0, 0, 0, "EMTEC, Intenso, YAKUMO, PLATINUM, Silver Circle"},
+	{"SKY media Manufacturing SA"         , 97, 17, 10,  0, 0, 0, ""},
+	{"Wing"                               , 97, 18, 10,  0, 0, 0, ""},
+	{"DDT"                                , 97, 18, 20,  0, 0, 0, ""},
+	{"Daxon Technology Inc. / Acer"       , 97, 22, 60,  0, 0, 0, "Maxmax, Diamond Data, BenQ, gold, SONY"},
+	{"Taiyo Yuden Company Limited"        , 97, 24,  0,  0, 0, 0, "Maxell, FUJIFILM, SONY"},
+	{"Sony Corporation"                   , 97, 24, 10,  0, 0, 0, "LeadData, Imation"},
+	{"Computer Support Italcard s.r.l"    , 97, 24, 20,  0, 0, 0, ""},
+	{"Unitech Japan Inc."                 , 97, 24, 30,  0, 0, 0, ""},
+	{"MPO, France"                        , 97, 25,  0,  0, 0, 0, "TDK"},
+	{"Hitachi Maxell Ltd."                , 97, 25, 20,  0, 0, 0, ""},
+	{"Infodisc Technology Co,Ltd."        , 97, 25, 30,  0, 0, 0, "MEMOREX, SPEEDA, Lead data"},
+	{"Xcitec"                             , 97, 25, 60,  0, 0, 0, ""},
+	{"Fornet International Pte Ltd"       , 97, 26,  0,  0, 0, 0, "COMPUSA, Cdhouse"},
+	{"Postech Corporation"                , 97, 26, 10,  0, 0, 0, "Mr.Platinum"},
+	{"SKC Co Ltd."                        , 97, 26, 20,  0, 0, 0, "Infinite"},
+	{"Fuji Photo Film Co,Ltd."            , 97, 26, 40,  0, 0, 0, ""},
+	{"Lead Data Inc."                     , 97, 26, 50,  0, 0, 0, "SONY, Gigastorage, MIRAGE"},
+	{"CMC Magnetics Corporation"          , 97, 26, 60,  0, 0, 0, "Daxon, Verbatim, Memorex, Bi-Winner, PLEXTOR, YAMAHA, Melody, Office DEPOT, Philips, eMARK, imation, HyperMedia, Samsung, Shintaro, Techworks"},
+	{"Ricoh Company Limited"              , 97, 27,  0,  0, 0, 0, "Sony, Digital Storage, Csita"},
+	{"Plasmon Data Systems Ltd"           , 97, 27, 10,  0, 0, 0, "Ritek, TDK, EMTEC, ALPHAPET, MANIA"},
+	{"Princo Corporation"                 , 97, 27, 20,  0, 0, 0, ""},
+	{"Pioneer"                            , 97, 27, 30,  0, 0, 0, ""},
+	{"Eastman Kodak Company"              , 97, 27, 40,  0, 0, 0, ""},
+	{"Mitsui Chemicals Inc."              , 97, 27, 50,  0, 0, 0, "MAM-A, TDK"},
+	{"Ricoh Company Limited"              , 97, 27, 60,  0, 0, 0, "Ritek"},
+	{"Gigastorage Corporation"            , 97, 28, 10,  0, 0, 0, "MaxMax, Nan-Ya"},
+	{"Multi Media Masters&Machinary SA"   , 97, 28, 20,  0, 0, 0, "King, Mmirex"},
+	{"Ritek Corp"                         , 97, 31,  0,  0, 0, 0, "TDK"},
+	{"Grand Advance Technology Sdn. Bhd." , 97, 31, 30,  0, 0, 0, ""},
+	{"TDK Corporation"                    , 97, 32, 00,  0, 0, 0, ""},
+	{"Prodisc Technology Inc."            , 97, 32, 10,  0, 0, 0, "Smartbuy, Mitsubishi, Digmaster, LG, Media Market"},
+	{"Mitsubishi Chemical Corporation"    , 97, 34, 20,  0, 0, 0, "YAMAHA, Verbatim"},
+	{"Mitsui Chemicals Inc."              , 97, 48, 50, 0, 0, 0, ""},
+	{"TDK Corporation"                    , 97, 49,  0, 0, 0, 0, ""},
+	{"", 0, 0, 0, 0, 0, 0, ""}
+	};
+
+	int i, f_li_0;
+	char buf[1024];
+	char *result = NULL;
+
+	f_li_0 = f_li - (f_li % 10);
+	for (i = 0; mid_list[i].manufacturer[0]; i++) {
+		if (m_li == mid_list[i].m_li &&
+		    s_li == mid_list[i].s_li &&
+		    (f_li_0 == mid_list[i].f_li || f_li == mid_list[i].f_li))
+	break;
+	}
+	if (mid_list[i].manufacturer[0] == 0) {
+		sprintf(buf, "Unknown CD manufacturer. Please report code '%2.2dm%2.2ds%2.2df/%2.2dm%2.2ds%2.2df', the human readable brand, size, and speed to scdbackup@gmx.net.", m_li, s_li, f_li, m_lo, s_lo, f_lo);
+		result = strdup(buf);
+		return result;
+	}
+
+	/* Compose, allocate and copy result */
+	if ((flag & 1) && mid_list[i].other_brands[0]) {
+		sprintf(buf, "%s  (aka %s)",
+			mid_list[i].manufacturer, mid_list[i].other_brands);
+		result = strdup(buf);
+	} else
+		result = strdup(mid_list[i].manufacturer);
+	return result;
+}
+
+
+/* ts A90904 */
+struct dvd_mid_record {
+	char *mc1;
+	char *mc2;
+	int mc1_sig_len;
+	char *manufacturer;
+};
+typedef struct dvd_mid_record dvd_mid_record_t;
+
+/* ts A90904 */
+char *burn_guess_manufacturer(int prf,
+			 char *media_code1, char *media_code2, int flag)
+{
+	int i, l = 0, m_li, s_li, f_li, m_lo, s_lo, f_lo;
+	char buf[1024];
+	char *result = NULL, *cpt;
+
+	/* Important Note: media_code1 and media_code2 are supposed to be
+	                   encoded by burn_util_make_printable_word().
+	                   Especially: ' ' -> '_' , {"_%/" unprintables -> %XY)
+	*/
+	static dvd_mid_record_t mid_list[]= {
+	{"AML",      "",    8, "UML"},
+	{"BeAll",    "",    5, "BeAll Developers, Inc."},
+	{"CMC",      "",    3, "CMC Magnetics Corporation"},
+	{"DAXON",    "",    5, "Daxon Technology Inc. / Acer"},
+	{"Daxon",    "",    5, "Daxon Technology Inc. / Acer"},
+	{"FUJI",     "",    4, "Fujifilm Holdings Corporation"},
+	{"INFODISC", "",    8, "New Star Digital Co., Ltd."},
+	{"INFOME",   "",    6, "InfoMedia Inc."},
+	{"ISMMBD",   "",    6, "Info Source Multi Media Ltd."},
+	{"JVC",      "",    3, "JVC Limited"},
+	{"KIC01RG",  "",    7, "AMC"},
+	{"LD",       "",    8, "Lead Data Inc."},
+	{"LGE",      "",    3, "LG Electronics"},
+	{"MAM",      "",    8, "Mitsui Advanced Media, Inc. Europe"},
+	{"MAXELL",   "",    6, "Hitachi Maxell Ltd."},
+	{"MBI",      "",    3, "Moser Baer India Limited"},
+	{"MCC",      "",    8, "Mitsubishi Chemical Corporation"},
+	{"MCI",      "",    8, "Mitsui Chemicals Inc."},
+	{"MEI",      "",    3, "Panasonic Corporation"},
+	{"MKM",      "",    3, "Mitsubishi Kagaku Media Co."},
+	{"MMC",      "",    8, "Mitsubishi Kagaku Media Co."},
+	{"MXL",      "",    8, "Hitachi Maxell Ltd."},
+	{"NANYA",    "",    5, "Nan-Ya Plastics Corporation"},
+	{"NSD",      "",    8, "NESA International Inc."},
+	{"OPTODISC", "",    8, "Optodisc Technology Corporation"},
+	{"OTCBDR",   "",    8, "Optodisc Technology Corporation"},
+	{"PHILIP",   "",    8, "Moser Baer India Limited"},
+	{"PHILIPS",  "",    8, "Philips"},
+	{"PRINCO",   "",    6, "Princo Corporation"},
+	{"PRODISC",  "",    7, "Prodisc Technology Inc."},
+	{"Prodisc",  "",    7, "Prodisc Technology Inc."},
+	{"PVC",      "",    3, "Pioneer"},
+	{"RICOHJPN", "",    8, "Ricoh Company Limited"},
+	{"RITEK",    "",    5, "Ritek Corp"},
+	{"SONY",     "",    4, "Sony Corporation"},
+	{"TDK",      "",    3, "TDK Corporation"},
+	{"TT",       "",    8, "TDK Corporation"},
+	{"TY",       "",    8, "Taiyo Yuden Company Limited"},
+	{"TYG",      "",    3, "Taiyo Yuden Company Limited"},
+	{"UTJR001",  "",    7, "Unifino Inc."},
+	{"VERBAT",   "",    5, "Mitsubishi Kagaku Media Co."},
+	{"YUDEN",    "",    5, "Taiyo Yuden Company Limited"},
+	{"", "", 0, ""}
+	};
+
+	if (media_code2 != NULL &&
+	    (prf == -1 || prf == 0x09 || prf == 0x0A)) {
+		if (strlen(media_code2) == 9 && media_code1[0] == '9' &&
+			media_code1[2] == 'm' && media_code1[5] == 's' &&
+			media_code1[8] == 'f' &&
+			strchr(media_code1, '%') == NULL) {
+			sscanf(media_code1, "%dm%ds%df", &m_li, &s_li, &f_li);
+			sscanf(media_code2, "%dm%ds%df", &m_lo, &s_lo, &f_lo);
+			if (m_li >= 96 && m_li <= 97 && m_lo > 0) {
+				result = burn_guess_cd_manufacturer(
+					m_li, s_li, f_li, m_lo, s_lo, f_lo, 0);
+				return result;
+			}
+		}
+	}
+
+	/* DVD-R do not keep manufacturer id apart from media id.
+	   Some manufacturers use a blank as separator which would now be '_'.
+	*/
+	cpt = strchr(media_code1, '_');
+	if (cpt != NULL && (prf == -1 || prf ==  0x11 || prf == 0x13 ||
+						 prf == 0x14 || prf == 0x15))
+		l = cpt - media_code1;
+
+	for (i = 0; mid_list[i].mc1[0]; i++) {
+		if (strncmp(mid_list[i].mc1, media_code1,
+			 mid_list[i].mc1_sig_len) == 0)
+	break;
+		if (l > 0)
+			if (strncmp(mid_list[i].mc1, media_code1, l) == 0)
+	break;
+	}
+	if (mid_list[i].mc1[0] == 0) {
+		sprintf(buf, "Unknown DVD/BD manufacturer. Please report code '%s/%s', the human readable brand, size, and speed to scdbackup@gmx.net.", 
+			media_code1, media_code2);
+		result = strdup(buf);
+		return result;
+	}
+	result = strdup(mid_list[i].manufacturer);
+	return result;
+}
+
+
+/* ts A90905 */
+/* Make *text a single printable word */
+/* IMPORTANT: text must be freeable memory !
+   @param flag bit0=escape '/' too
+               bit1=(overrides bit0) do not escape " _/"
+*/
+int burn_util_make_printable_word(char **text, int flag)
+{
+	int i, esc_add = 0, ret;
+	char *wpt, *rpt, *new_text = NULL;
+
+	if (flag & 2)
+		flag &= ~1;
+
+	for (i = 0; (*text)[i]; i++) {
+		rpt = (*text) + i;
+		if (*rpt < 32 || *rpt > 126 || *rpt == 96 ||
+		    ((*rpt == '_' || *rpt == '%') && (!(flag & 2))) ||
+		    (*rpt == '/' && (flag & 1)))
+			esc_add += 2;
+	}
+	if (esc_add) {
+		new_text = calloc(strlen(*text) + esc_add + 1, 1);
+		if (new_text == NULL) {
+			ret = -1;
+			goto ex;
+		}
+		wpt = new_text;
+		for (i = 0; (*text)[i]; i++) {
+			rpt = (*text) + i;
+			if (*rpt < 32 || *rpt > 126 || *rpt == 96 ||
+			    ((*rpt == '_' || *rpt == '%') && (!(flag & 2))) ||
+			    (*rpt == '/' && (flag & 1))) {
+				sprintf(wpt, "%%%2.2X", 
+				    (unsigned int) *((unsigned char *) rpt));
+				wpt+= 3;
+			} else
+				*(wpt++) = *rpt;
+		}
+		*wpt = 0;
+		free(*text);
+		*text = new_text;
+	}
+	if (!(flag & 2))
+		for (i = 0; (*text)[i]; i++)
+			if ((*text)[i] == ' ')
+				(*text)[i] = '_';
+	ret = 1;
+ex:
+	return ret;
+}
+

libburn/util.h

@@ -5,4 +5,7 @@ char *burn_strdup(char *s);
 
 char *burn_strndup(char *s, int n);
 
+/* ts A90905 */
+int burn_util_make_printable_word(char **text, int flag);
+
 #endif

libburn/write.c

@@ -36,7 +36,6 @@
 #include "crc.h"
 #include "debug.h"
 #include "init.h"
-#include "lec.h"
 #include "toc.h"
 #include "util.h"
 #include "sg.h"
@@ -44,11 +43,19 @@
 #include "options.h"
 #include "structure.h"
 #include "source.h"
+#include "mmc.h"
+#include "spc.h"
 
 #include "libdax_msgs.h"
 extern struct libdax_msgs *libdax_messenger;
 
 
+/* ts A91120 : <<< experimental */
+#ifdef Libburn_mmap_write_buffeR
+#include <sys/mman.h>
+#endif
+
+
 /* The maximum output size to be used with CD media. This is also curbed
    by BURN_OS_TRANSPORT_BUFFER_SIZE. The smaller number gets into effect.
 */ 
@@ -770,8 +777,18 @@ int burn_write_track(struct burn_write_opts *o, struct burn_session *s,
 		libdax_msgs_submit(libdax_messenger, d->global_index, 0x000002,
 				LIBDAX_MSGS_SEV_DEBUG, LIBDAX_MSGS_PRIO_ZERO,
 				msg, 0, 0);
-		if (nwa > d->nwa)
-			d->nwa = nwa;
+
+		/* ts A91003 */
+		if (nwa < d->nwa) {
+			libdax_msgs_submit(libdax_messenger, d->global_index,
+				0x00020173,
+				LIBDAX_MSGS_SEV_FAILURE, LIBDAX_MSGS_PRIO_HIGH,
+			   "Drive tells NWA smaller than last written address",
+				0, 0);
+			d->sync_cache(d);
+			return 0;
+		}
+		d->nwa = nwa;
 
 	}
 
@@ -868,8 +885,19 @@ ex:;
 		d->sync_cache(d);
 
 		/* ts A61030 */
-		if (burn_write_close_track(o, s, tnum) <= 0)
-			ret = 0;
+		/* ts A91003 :
+		   At least in simulation mode this causes NWA=0 for the
+		   next track. cdrecord does not use CLOSE TRACK at all but
+		   ends the tracks by SYNCHRONIZE CACHE alone.
+		*/
+		/* ts A91202 :
+		   Peng Shao reports that his LG GH22LS30 issues an SCSI error
+		   on CLOSE TRACK even in non-dummy mode. So i better give up
+		   this gesture which seems not be needed by any drive.
+			if (!o->simulate)
+				if (burn_write_close_track(o, s, tnum) <= 0)
+					ret = 0;
+		*/
 	}
 	return ret;
 }
@@ -884,8 +912,8 @@ int burn_disc_write_is_ok(struct burn_write_opts *o, struct burn_disc *disc,
 
 	for (i = 0; i < disc->sessions; i++)
 		for (t = 0; t < disc->session[i]->tracks; t++)
-			if (!sector_headers_is_ok(
-					o, disc->session[i]->track[t]->mode))
+			if (sector_headers_is_ok(
+				o, disc->session[i]->track[t]->mode) != 1)
 				goto bad_track_mode_found;
 	return 1;
 bad_track_mode_found:;
@@ -1065,11 +1093,25 @@ int burn_disc_open_track_dvd_minus_r(struct burn_write_opts *o,
 	/* ts A70214 : eventually adjust already expanded size of track */
 	burn_track_apply_fillup(s->track[tnum], d->media_capacity_remaining,1);
 
+#ifdef Libburn_pioneer_dvr_216d_with_opC
+	fprintf(stderr, "libburn_DEBUG: Libburn_pioneer_dvr_216d_with_opC : num_opc_tables = %d\n", d->num_opc_tables);
+	if (d->num_opc_tables <= 0 && !o->simulate) {
+		fprintf(stderr, "libburn_DEBUG: Libburn_pioneer_dvr_216d_with_opC : performing OPC\n");
+		d->perform_opc(d);
+		fprintf(stderr, "libburn_DEBUG: Libburn_pioneer_dvr_216d_with_opC : done\n");
+	}
+#endif
+
+#ifdef Libburn_pioneer_dvr_216d_get_evenT
+	mmc_get_event(d);
+#endif
+
 	if (o->write_type == BURN_WRITE_SAO) { /* DAO */
- 		/* Round track size up to 32 KiB and reserve track */
+ 		/* Round track size up to write chunk size and reserve track */
 		size = ((off_t) burn_track_get_sectors(s->track[tnum]))
-			 * (off_t) 2048;
-		size = (size + (off_t) 0x7fff) & ~((off_t) 0x7fff);
+			* (off_t) 2048;
+		if (size % o->obs)
+			size += (off_t) (o->obs - (size % o->obs));
 		ret = d->reserve_track(d, size);
 		if (ret <= 0) {
 			sprintf(msg, "Cannot reserve track of %.f bytes",
@@ -1107,14 +1149,11 @@ int burn_disc_open_track_dvd_plus_r(struct burn_write_opts *o,
 
 	if (o->write_type == BURN_WRITE_SAO &&
 	    ! burn_track_is_open_ended(s->track[tnum])) {
- 		/* Round track size up to 32 KiB and reserve track */
-
-		/* ts A81208 */
-		/* >>> ??? round to 64 KiB for BD-R ? (It is not mandatory) */
-
+ 		/* Round track size up to write chunk size and reserve track */
 		size = ((off_t) burn_track_get_sectors(s->track[tnum]))
-			 * (off_t) 2048;
-		size = (size + (off_t) 0x7fff) & ~((off_t) 0x7fff);
+			* (off_t) 2048;
+		if (size % o->obs)
+			size += (off_t) (o->obs - (size % o->obs));
 		ret = d->reserve_track(d, size);
 		if (ret <= 0) {
 			sprintf(msg, "Cannot reserve track of %.f bytes",
@@ -1216,6 +1255,132 @@ int burn_disc_close_track_dvd_plus_r(struct burn_write_opts *o,
 }
 
 
+/* <<<
+#define Libburn_simplified_dvd_chunk_transactioN 1
+*/
+
+#ifdef Libburn_simplified_dvd_chunk_transactioN
+
+/* ts A91114 : EXPERIMENTAL, NOT COMPLETELY IMPLEMENTED
+
+   Simplified data transmission for DVD. libburn via Linux USB is 30 % slower
+   than growisofs or cdrecord when transmitting 32 KB chunks.
+   With 64 KB chunks it is 20% faster than the competitors.
+   No heavy CPU load is visible but there might be subtle race conditions in
+   the USB driver which work better with shorter time gaps between WRITE
+   commands.
+
+   Insight: It is actually about the interference of track source reading
+            with SCSI writing via USB. growisofs reads with O_DIRECT into a
+            mmap()ed buffer. When doing the same, libburn with 32 KB chunks
+            reaches similar write speed.
+            On the other hand, 64 KB chunks are 20% faster than that and
+            are not improved by reading O_DIRECT.
+
+            O_DIRECT is a property of the input fd of struct burn_source.
+            It can only be done with properly aligned memory and with aligned
+            read size. Alignment size is file system system specific.
+            System call
+                mmap(NULL, (size_t) buffer_size, PROT_READ | PROT_WRITE,
+                     MAP_SHARED | MAP_ANONYMOUS, -1, (off_t) 0);
+            is supposed to allocate a properly aligned buffer.
+            64 KB is supposed to be a safe size.
+            Actually mmap() seems to be the main cause for a positive effect
+            of O_DIRECT.
+
+   This simplified transmission function did not bring visible benefit.
+   So for now it is not worth to teach it all applicable details of old
+   CD sector oriented transmission.
+
+   @return 1= ok, go on , 2= no input with track->open_ended = nothing written
+           <= 0 = error
+*/
+static int transact_dvd_chunk(struct burn_write_opts *opts,
+				 struct burn_track *track)
+{
+	int curr = 0, valid, err;
+	struct burn_drive *d = opts->drive;
+        struct buffer *out = d->buffer;
+	unsigned char *data = out->data;
+
+#ifdef Libburn_log_in_and_out_streaM
+	/* <<< ts A61031 */
+	static int tee_fd= -1;
+	if(tee_fd==-1)
+		tee_fd= open("/tmp/libburn_sg_readin",
+				O_WRONLY|O_CREAT|O_TRUNC,S_IRUSR|S_IWUSR);
+#endif /* Libburn_log_in_and_out_streaM */
+
+
+	/* Read a chunk full of data */
+
+	/* ??? Do we have offset padding ? >>> First produce offset padding */;
+
+	/*  <<<< */
+	if (0 && !track->eos) {
+		for (curr = 0; curr < opts->obs; curr += 2048) {
+			if (track->source->read != NULL)
+				valid = track->source->read(track->source,
+						data + curr, 2048);
+			else
+				valid = track->source->read_xt(track->source,
+						data + curr, 2048);
+			if (valid <= 0) {
+				track->eos = 1;
+		break;
+			}
+			track->sourcecount += valid;
+
+#ifdef Libburn_log_in_and_out_streaM
+			if(tee_fd!=-1 && valid>0) {
+				write(tee_fd, data + curr, valid);
+			}
+#endif /* Libburn_log_in_and_out_streaM */
+
+		}
+	} else if (!track->eos){
+		valid = track->source->read(track->source, data, opts->obs);
+		if (valid <= 0) {
+			track->eos = 1;
+		} else {
+			track->sourcecount += valid;
+			curr = valid;
+
+#ifdef Libburn_log_in_and_out_streaM
+			if(tee_fd!=-1 && valid>0) {
+				write(tee_fd, data, valid);
+			}
+#endif /* Libburn_log_in_and_out_streaM */
+		}
+	}
+	if (curr == 0 && track->open_ended) {
+
+		/* >>> allow tail padding */;
+
+		return 2;
+	}
+	if (curr < opts->obs)
+		memset(data + curr , 0, opts->obs - curr);
+
+	/* Write chunk */
+	out->bytes = opts->obs;
+	out->sectors = out->bytes / 2048;
+	err = d->write(d, d->nwa, out);
+	if (err == BE_CANCELLED)
+		return 0;
+	track->writecount += out->bytes;
+	track->written_sectors += out->sectors;
+	d->progress.buffered_bytes += out->bytes;
+	d->nwa += out->sectors;
+	out->bytes = 0;
+	out->sectors = 0;
+
+	return 1;
+}
+
+#endif /* Libburn_simplified_dvd_chunk_transactioN */
+
+
 /* ts A61218 - A81208 */
 int burn_dvd_write_track(struct burn_write_opts *o,
 			struct burn_session *s, int tnum, int is_last_track)
@@ -1225,6 +1390,7 @@ int burn_dvd_write_track(struct burn_write_opts *o,
 	struct buffer *out = d->buffer;
 	int sectors;
 	int i, open_ended = 0, ret= 0, is_flushed = 0;
+	int first_buf_cap = 0, further_cap = 0, buf_cap_step = 1024;
 
 	/* ts A70213 : eventually expand size of track to max */
 	burn_track_apply_fillup(t, d->media_capacity_remaining, 0);
@@ -1235,6 +1401,11 @@ int burn_dvd_write_track(struct burn_write_opts *o,
 		ret = burn_disc_open_track_dvd_minus_r(o, s, tnum);
 		if (ret <= 0)
 			goto ex;
+		/* Pioneer DVR-216D rev 1.09 hates multiple buffer inquiries
+		   before the drive buffer is full.
+		*/
+		first_buf_cap = 0;
+		further_cap = -1;
 	} else if (d->current_profile == 0x1b || d->current_profile == 0x2b) {
 		/* DVD+R , DVD+R/DL */
 		ret = burn_disc_open_track_dvd_plus_r(o, s, tnum);
@@ -1270,12 +1441,30 @@ int burn_dvd_write_track(struct burn_write_opts *o,
 	for (i = 0; open_ended || i < sectors; i++) {
 
 		/* From time to time inquire drive buffer */
-		if ((i%256)==0)
+		/* ts A91110: Eventually avoid to do this more than once
+		              before the drive buffer is full. See above DVD-
+		*/
+		if (i == first_buf_cap ||
+		   ((i % buf_cap_step) == 0 &&
+		    (i >= further_cap || further_cap < 0))) {
 			d->read_buffer_capacity(d);
+			if (further_cap < 0)
+				further_cap =
+			 	    d->progress.buffer_capacity / 2048 + 128;
+		}
 
+#ifdef Libburn_simplified_dvd_chunk_transactioN
+
+		ret = transact_dvd_chunk(o, t);
+		if (ret <= 0)
+			{ret = 0; goto ex;}
+		i += o->obs / 2048 - 1;
+		d->progress.sector += o->obs / 2048 - 1;
+#else
 		/* transact a (CD sized) sector */
 		if (!sector_data(o, t, 0))
 			{ ret = 0; goto ex; }
+#endif
 
 		if (open_ended) {
 			d->progress.sectors = sectors = i;
@@ -1736,6 +1925,30 @@ int burn_dvd_write_sync(struct burn_write_opts *o,
 		o->obs_pad = 1; /* fill-up track's last 32k buffer */
 	}
 
+#ifdef Libburn_dvd_obs_default_64K
+	o->obs = 64 * 1024;
+#endif
+
+	/* <<< test only : Does this increase effective speed with USB ?
+		ts A90801 : 64kB: speed with 16x DVD-R is 12 rather than 8
+		            128kB: glibc complains about double free
+		                   With BURN_OS_TRANSPORT_BUFFER_SIZE
+		                   enlarged to 128 MB, the first WRITE fails
+		                   with an i/o error.
+	o->obs = 64 * 1024;
+	*/
+
+	if (o->dvd_obs_override >= 32 * 1024)
+		o->obs = o->dvd_obs_override;
+
+	if (o->obs > BUFFER_SIZE) {
+		sprintf(msg, "Chosen write chunk size %d exceeds system dependent buffer size", o->obs);
+		libdax_msgs_submit(libdax_messenger, d->global_index,
+				 0x00000002, LIBDAX_MSGS_SEV_DEBUG,
+				 LIBDAX_MSGS_PRIO_ZERO, msg, 0, 0);
+		o->obs = 32 * 1024; /* This size is required to work */
+	}
+
 	sprintf(msg, "dvd/bd Profile= %2.2Xh , obs= %d , obs_pad= %d",
 		d->current_profile, o->obs, o->obs_pad);
 	libdax_msgs_submit(libdax_messenger, d->global_index, 0x00000002,
@@ -2022,8 +2235,9 @@ int burn_stdio_write_track(struct burn_write_opts *o, struct burn_session *s,
 	break;
 		}
 		d->progress.sector++;
-		/* Flush to disk after each full MB */
-		if (d->progress.sector - prev_sync_sector >= 512) {
+		/* Flush to disk from time to time */
+		if (d->progress.sector - prev_sync_sector >=
+		    o->stdio_fsync_size && o->stdio_fsync_size > 0) {
 			prev_sync_sector = d->progress.sector;
 			if (!o->simulate)
 				burn_stdio_sync_cache(d->stdio_fd, d, 1);
@@ -2106,6 +2320,7 @@ void burn_disc_write_sync(struct burn_write_opts *o, struct burn_disc *disc)
 	off_t default_size;
 	char msg[80];
 
+
 /* ts A60924 : libburn/message.c gets obsoleted
 	burn_message_clear_queue();
 */
@@ -2120,11 +2335,12 @@ void burn_disc_write_sync(struct burn_write_opts *o, struct burn_disc *disc)
 	else
 		d->stream_recording_start = 0;
 
-	d->buffer = calloc(sizeof(struct buffer), 1);
+	/* ts A91122 : Get buffer suitable for sources made by
+	               burn_os_open_track_src() */
+	d->buffer = burn_os_alloc_buffer(sizeof(struct buffer), 0);
 	if (d->buffer == NULL)
 		goto fail_wo_sync;
 
-
 /* >>> ts A90321
 
 	memset(d->buffer, 0, sizeof(struct buffer));
@@ -2345,7 +2561,8 @@ fail_wo_sync:;
 ex:;
 	d->do_stream_recording = 0;
 	if (d->buffer != NULL)
-		free((char *) d->buffer);
+		burn_os_free_buffer((char *) d->buffer,
+					sizeof(struct buffer), 0);
 	d->buffer = buffer_mem;
 	return;
 }